astroquery 0.4.12.dev10885__tar.gz → 0.4.12.dev11095__tar.gz

{astroquery-0.4.12.dev10885 → astroquery-0.4.12.dev11095}/.github/workflows/changelog.yml

@@ -14,7 +14,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
     - name: Check change log entry
-      uses: scientific-python/action-check-changelogfile@1fc669db9618167166d5a16c10282044f51805c0  # 0.3
+      uses: scientific-python/action-check-changelogfile@92735146b118b1dd2951cb4a45d60c2d8b47a153  # 0.5
       env:
         CHANGELOG_FILENAME: CHANGES.rst
         GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

{astroquery-0.4.12.dev10885 → astroquery-0.4.12.dev11095}/.github/workflows/ci_crontests.yml

@@ -36,11 +36,11 @@ jobs:
 
     steps:
     - name: Checkout code
-      uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10  # v6.0.3
+      uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1  # v7.0.1
       with:
         fetch-depth: 0
     - name: Set up Python
-      uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405  # v6.2.0
+      uses: actions/setup-python@5fda3b95a4ea91299a34e894583c3862153e4b97  # v7.0.0
       with:
         python-version: ${{ matrix.python }}
     - name: Install Python dependencies

{astroquery-0.4.12.dev10885 → astroquery-0.4.12.dev11095}/.github/workflows/ci_devtests.yml

@@ -44,11 +44,11 @@ jobs:
 
     steps:
     - name: Checkout code
-      uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10  # v6.0.3
+      uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1  # v7.0.1
       with:
         fetch-depth: 0
     - name: Set up Python
-      uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405  # v6.2.0
+      uses: actions/setup-python@5fda3b95a4ea91299a34e894583c3862153e4b97  # v7.0.0
       with:
         python-version: ${{ matrix.python }}
     - name: Install Python dependencies
@@ -57,6 +57,6 @@ jobs:
       run: tox ${{ matrix.toxargs }} -e ${{ matrix.toxenv }} -- ${{ matrix.toxposargs }}
     - name: Upload coverage to codecov
       if: contains(matrix.toxenv,'-cov')
-      uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354  # v6.0.1
+      uses: codecov/codecov-action@303a32d7a59b442fa8d48b6a1cc6825c09c847a5  # v7.1.1
       with:
         file: ./coverage.xml

{astroquery-0.4.12.dev10885 → astroquery-0.4.12.dev11095}/.github/workflows/ci_online_crontests.yml

@@ -38,11 +38,11 @@ jobs:
 
     steps:
     - name: Checkout code
-      uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10  # v6.0.3
+      uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1  # v7.0.1
       with:
         fetch-depth: 0
     - name: Set up Python
-      uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405  # v6.2.0
+      uses: actions/setup-python@5fda3b95a4ea91299a34e894583c3862153e4b97  # v7.0.0
       with:
         python-version: ${{ matrix.python }}
     - name: Install Python dependencies

{astroquery-0.4.12.dev10885 → astroquery-0.4.12.dev11095}/.github/workflows/ci_tests.yml

@@ -63,11 +63,11 @@ jobs:
 
     steps:
     - name: Checkout code
-      uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10  # v6.0.3
+      uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1  # v7.0.1
       with:
         fetch-depth: 0
     - name: Set up Python
-      uses: actions/setup-python@a309ff8b426b58ec0e2a45f0f869d46889d02405  # v6.2.0
+      uses: actions/setup-python@5fda3b95a4ea91299a34e894583c3862153e4b97  # v7.0.0
       with:
         python-version: ${{ matrix.python }}
     - name: Install Python dependencies
@@ -76,6 +76,6 @@ jobs:
       run: tox ${{ matrix.toxargs }} -e ${{ matrix.toxenv }} -- ${{ matrix.toxposargs }}
     - name: Upload coverage to codecov
       if: contains(matrix.toxenv,'-cov')
-      uses: codecov/codecov-action@e79a6962e0d4c0c17b229090214935d2e33f8354  # v6.0.1
+      uses: codecov/codecov-action@303a32d7a59b442fa8d48b6a1cc6825c09c847a5  # v7.1.1
       with:
         file: ./coverage.xml

{astroquery-0.4.12.dev10885 → astroquery-0.4.12.dev11095}/.github/workflows/codeql-analysis.yml

@@ -27,7 +27,7 @@ jobs:
 
     steps:
     - name: Checkout repository
-      uses: actions/checkout@df4cb1c069e1874edd31b4311f1884172cec0e10  # v6.0.3
+      uses: actions/checkout@3d3c42e5aac5ba805825da76410c181273ba90b1  # v7.0.1
 
     # Initializes the CodeQL tools for scanning.
     - name: Initialize CodeQL

{astroquery-0.4.12.dev10885 → astroquery-0.4.12.dev11095}/CHANGES.rst

@@ -24,7 +24,16 @@ esa.emds.einsteinprobe
 
 - New module to access the ESA Einstein Probe Science Archive. [#3511]
 
+nrao
+^^^^
+
+- Restored and rewritten ``astroquery.nrao`` module, now backed by the NRAO
+  TAP service at ``data-query.nrao.edu``. [#3015]
+
+eso
+^^^
 
+- Add functionality to list and query ESO catalogues. [#3531]
 
 API changes
 -----------
@@ -66,6 +75,20 @@ esa.euclid
    ``latest``. [#3601]
 - The methods ``get_product_list`` and ``get_scientific_product_list`` accept the new parameter ``schema``. [#3611]
 
+gaia
+^^^^
+
+- The values that the ``data_structure parameter`` can accept have been changed from RAW to DATAMODEL_GAIA, and from
+  INDIVIDUAL to DATAMODEL_STANDARD. [#3629]
+
+esa.esasky
+^^^^^^^^^^
+
+- The argument tap_handler on ESASky has been deprecated. Use the ESASky instance directly for TAP
+  queries (Using esa.utils.EsaTap and PyVO).
+- Attribute urlBase has been deprecated on esasky.conf, use ESASKY_DOMAIN_SERVER instead.
+- Attribute timeout has been deprecated on esasky.conf, use ESASKY_CONNECTION_TIMEOUT instead.
+- Attribute row_limit has been deprecated on esasky.conf, use ESASKY_ROW_LIMIT instead.
 
 vizier
 ^^^^^^
@@ -81,6 +104,7 @@ mast
 - The ``objectname`` keyword is deprecated in ``MastMissions`` in favor of ``object_names``. [#3540]
 - The ``objectname`` parameter in ``Catalogs``, ``Observations``, ``Tesscut``, and ``utils`` is deprecated
   in favor of ``object_name``. [#3567]
+- Gaia cone search now defaults to DR3. Previously, DR3 was not supported and the default was DR2. [#3622]
 
 vo_conesearch
 ^^^^^^^^^^^^^
@@ -109,6 +133,14 @@ heasarc
 - Add support for uploading tables when using TAP directly through ``query_tap``. [#3403]
 - Add automatic guessing for the data host in ``download_data``. [#3403]
 - Include method to count the number of rows in a specified table. [#3549]
+- Fix ``query_region`` for catalog=None. It should fail early. [#3630]
+- Fix ``query_region`` when passing ``add_offset`` along with ``columns=None``. [#3630]
+- Generalize the ``content-type`` filter in ``locate_data`` in anticipation for backend datalink descriptor changes. [#3656]
+
+hitran
+^^^^^^
+
+- Updated the list of isotopes [#3644]
 
 gaia
 ^^^^
@@ -118,6 +150,15 @@ gaia
 - Fixed decimal precision for query_object and cone_search to use 14 decimal places [#3539].
 - Added ``get_query_payload`` kwarg to return the ADQL query string. [#3539]
 
+gemini
+^^^^^^
+
+- Add support for newer instruments (GHOST, IGRINS, IGRINS-2, MAROON-X, ALOPEKE, ZORRO) [#3638]
+
+esa.euclid
+^^^^^^^^^^
+
+- New method query_sia to access the Simple Image Access Protocol (SIAP) v2.0 [#3569]
 
 esa.hubble
 ^^^^^^^^^^
@@ -126,6 +167,11 @@ esa.hubble
   file is not in Datalabs yet [#3437]
 - Update ``get_datalabs_path`` method to check for files for new collections (HLSP and HSLA) [#3578]
 
+esa.euclid
+^^^^^^^^^^
+
+- Update the list of supported data products used by the ``get_product_list`` method [#3655]
+
 
 imcce
 ^^^^^
@@ -141,6 +187,13 @@ ipac.irsa
   ``"nafid_input"`` ``input_mode`` still work but emit
   ``AstropyDeprecationWarning``. [#3607]
 
+casda
+^^^^^
+
+- Preserve the percent-encoding of staged file URLs so that pre-signed S3
+  download URLs remain valid. Previously the URLs were unquoted, which corrupted
+  pre-signed URLs and could raise errors when parsed by ``urllib``. [#3636]
+
 
 mast
 ^^^^
@@ -173,6 +226,8 @@ mast
 - Added ``pass_id`` as an alias for the ``pass`` column in query functions for the Roman mission to avoid conflicts with
   the reserved Python keyword. [#3588]
 - Update the cutout format request parameter in ``Zcut.download_cutouts`` to reflect a recent service change. [#3608]
+- Add a ``count_only`` parameter to ``MastMissions`` query methods to return only the number of matching results,
+  rather than the full result table. [#3645]
 
 
 jplspec
@@ -214,11 +269,24 @@ simbad
 - Add the possibility to declare more information in the HTTP User-Agent header
   in ``SimbadClass`` [#3529]
 
+vizier
+~~~~~~
+
+- When server-side errors occur (ex: VizieR is overloaded), the response is not kept in
+  astroquery's cache anymore, and a Python error is raised instead of returning a
+  misleading empty ``TableList`` [#3632]
+
 xmatch
 ^^^^^^
 
 - change url of xmatch to use the new CDS domain name [#3465]
 
+ipac.ned
+^^^^^^^^
+
+- Updated NED queries to match the NED N36.1 API release, with
+  corresponding documentation and test updates. [#3606]
+
 
 Infrastructure, Utility and Other Changes and Additions
 -------------------------------------------------------

{astroquery-0.4.12.dev10885 → astroquery-0.4.12.dev11095}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.4
 Name: astroquery
-Version: 0.4.12.dev10885
+Version: 0.4.12.dev11095
 Summary: Functions and classes to access online astronomical data resources
 Author: The Astroquery Developers
 License-Expression: BSD-3-Clause
@@ -38,7 +38,7 @@ Provides-Extra: docs
 Requires-Dist: sphinx; extra == "docs"
 Requires-Dist: sphinx-automodapi; extra == "docs"
 Requires-Dist: matplotlib; extra == "docs"
-Requires-Dist: sphinx-astropy>=1.5; extra == "docs"
+Requires-Dist: sphinx-astropy[confv3]>=1.11; extra == "docs"
 Requires-Dist: scipy; extra == "docs"
 Requires-Dist: fsspec[http]; extra == "docs"
 Provides-Extra: all
@@ -94,7 +94,7 @@ website <https://simbad.cds.unistra.fr/simbad/>`_, use the ``simbad`` sub-packag
 Installation and Requirements
 -----------------------------
 
-Astroquery works with Python 3.9 or later.
+Astroquery works with Python 3.10 or later.
 As an `astropy`_ affiliate, astroquery requires `astropy`_ version 5.0 or later.
 
 The latest version of astroquery can be pip installed (note the ``--pre`` for
@@ -113,22 +113,12 @@ dependencies required to build the documentation or run the tests):
     $ python -m pip install -U --pre astroquery[all]
 
 
-To install the 'bleeding edge' version:
+To install the 'bleeding edge' version from GitHub:
 
 .. code-block:: bash
 
    $ python -m pip install git+https://github.com/astropy/astroquery.git
 
-or cloned and installed from source:
-
-.. code-block:: bash
-
-    $ # If you have a github account:
-    $ git clone git@github.com:astropy/astroquery.git
-    $ # If you do not:
-    $ git clone https://github.com/astropy/astroquery.git
-    $ cd astroquery
-    $ python -m pip install .
 
 Using astroquery
 ----------------
@@ -165,7 +155,7 @@ looked up at the following `Zenodo page <https://doi.org/10.5281/zenodo.591669>`
 Additional Links
 ----------------
 
-Maintained by `Adam Ginsburg`_ and `Brigitta Sipocz <https://github.com/bsipocz>`_
+Maintained by `Adam Ginsburg`_ and `Brigitta Sipőcz <https://github.com/bsipocz>`_
 
 
 .. _Download Development ZIP: https://github.com/astropy/astroquery/zipball/main

{astroquery-0.4.12.dev10885 → astroquery-0.4.12.dev11095}/README.rst

@@ -43,7 +43,7 @@ website <https://simbad.cds.unistra.fr/simbad/>`_, use the ``simbad`` sub-packag
 Installation and Requirements
 -----------------------------
 
-Astroquery works with Python 3.9 or later.
+Astroquery works with Python 3.10 or later.
 As an `astropy`_ affiliate, astroquery requires `astropy`_ version 5.0 or later.
 
 The latest version of astroquery can be pip installed (note the ``--pre`` for
@@ -62,22 +62,12 @@ dependencies required to build the documentation or run the tests):
     $ python -m pip install -U --pre astroquery[all]
 
 
-To install the 'bleeding edge' version:
+To install the 'bleeding edge' version from GitHub:
 
 .. code-block:: bash
 
    $ python -m pip install git+https://github.com/astropy/astroquery.git
 
-or cloned and installed from source:
-
-.. code-block:: bash
-
-    $ # If you have a github account:
-    $ git clone git@github.com:astropy/astroquery.git
-    $ # If you do not:
-    $ git clone https://github.com/astropy/astroquery.git
-    $ cd astroquery
-    $ python -m pip install .
 
 Using astroquery
 ----------------
@@ -114,7 +104,7 @@ looked up at the following `Zenodo page <https://doi.org/10.5281/zenodo.591669>`
 Additional Links
 ----------------
 
-Maintained by `Adam Ginsburg`_ and `Brigitta Sipocz <https://github.com/bsipocz>`_
+Maintained by `Adam Ginsburg`_ and `Brigitta Sipőcz <https://github.com/bsipocz>`_
 
 
 .. _Download Development ZIP: https://github.com/astropy/astroquery/zipball/main

{astroquery-0.4.12.dev10885 → astroquery-0.4.12.dev11095}/astroquery/alma/core.py

@@ -217,7 +217,7 @@ def get_enhanced_table(result):
     except ImportError:
         print(
             "Could not import astropy-regions, which is a requirement for get_enhanced_table function in alma."
-            "Please refer to https://astropy-regions.readthedocs.io/en/latest/installation.html for how to install it.")
+            "Please refer to the ``regions`` documentation for installation instructions.")
         raise
 
     def _parse_stcs_string(input):
@@ -494,7 +494,7 @@ class AlmaClass(QueryWithLogin):
             calibration, None to return both
         enhanced_results : bool
             True to return a table with quantities instead of just values. It
-            also returns the footprint as `regions` objects.
+            also returns the footprint as ``regions`` objects.
         payload : dict
             Dictionary of additional keywords.  See `help`.
         """
@@ -528,7 +528,7 @@ class AlmaClass(QueryWithLogin):
             Dictionary of additional keywords.  See `help`.
         enhanced_results : bool
             True to return a table with quantities instead of just values. It
-            also returns the footprints as `regions` objects.
+            also returns the footprints as ``regions`` objects.
         """
         rad = radius
         if not isinstance(radius, u.Quantity):
@@ -571,7 +571,7 @@ class AlmaClass(QueryWithLogin):
             Cap on the amount of records returned.  Default is no limit.
         enhanced_results : bool
             True to return a table with quantities instead of just values. It
-            also returns the footprints as `regions` objects.
+            also returns the footprints as ``regions`` objects.
 
         Returns
         -------

{astroquery-0.4.12.dev10885 → astroquery-0.4.12.dev11095}/astroquery/casda/core.py

@@ -280,7 +280,7 @@ class CasdaClass(QueryWithLogin):
         job_details = self._get_job_details_xml(job_url)
         fileurls = []
         for result in job_details.find("uws:results", self._uws_ns).findall("uws:result", self._uws_ns):
-            file_location = unquote(result.get("{http://www.w3.org/1999/xlink}href"))
+            file_location = result.get("{http://www.w3.org/1999/xlink}href")
             fileurls.append(file_location)
 
         return fileurls

{astroquery-0.4.12.dev10885 → astroquery-0.4.12.dev11095}/astroquery/casda/tests/data/completed_job.xml

@@ -17,8 +17,9 @@
         </uws:parameter>
     </uws:parameters>
     <uws:results>
-        <uws:result id="cube-244.checksum" xlink:type="simple" xlink:href="http%3A%2F%2Fcasda.csiro.au%2Fdownload%2Fweb%2F111-000-111-000%2Faskap_img.fits.checksum" />
-        <uws:result id="cube-244" xlink:type="simple" xlink:href="http%3A%2F%2Fcasda.csiro.au%2Fdownload%2Fweb%2F111-000-111-000%2Faskap_img.fits" />
+        <uws:result id="cube-244.checksum" xlink:type="simple" xlink:href="http://casda.csiro.au/download/web/111-000-111-000/askap_img.fits.checksum" />
+        <uws:result id="cube-244" xlink:type="simple" xlink:href="http://casda.csiro.au/download/web/111-000-111-000/askap_img.fits" />
+        <uws:result id="cube-245" xlink:type="simple" xlink:href="https://ingest.pawsey.org.au/casda-prd-as201-03/sb85679/catalogues/selavy.components.xml?response-content-disposition=attachment%3B%20filename%3D%22selavy.components.xml%22&amp;X-Amz-Algorithm=AWS4-HMAC-SHA256&amp;X-Amz-Credential=abc123%2F20260722%2Fpawsey%2Fs3%2Faws4_request&amp;X-Amz-Signature=deadbeef1234567890" />
     </uws:results>
     <uws:errorSummary xsi:nil="true" />
 </uws:job>

{astroquery-0.4.12.dev10885 → astroquery-0.4.12.dev11095}/astroquery/casda/tests/data/cutout_333.9092_-45.8418_0.5000.xml

@@ -17,8 +17,8 @@
         </uws:parameter>
     </uws:parameters>
     <uws:results>
-        <uws:result id="cutout-1234-cube-244.checksum" xlink:type="simple" xlink:href="http%3A%2F%2Fcasda.csiro.au%2Fdownload%2Fweb%2F111-000-111-000%2Fcutout.fits.checksum" />
-        <uws:result id="cutout-1234-cube-244" xlink:type="simple" xlink:href="http%3A%2F%2Fcasda.csiro.au%2Fdownload%2Fweb%2F111-000-111-000%2Fcutout.fits" />
+        <uws:result id="cutout-1234-cube-244.checksum" xlink:type="simple" xlink:href="http://casda.csiro.au/download/web/111-000-111-000/cutout.fits.checksum" />
+        <uws:result id="cutout-1234-cube-244" xlink:type="simple" xlink:href="http://casda.csiro.au/download/web/111-000-111-000/cutout.fits" />
     </uws:results>
     <uws:errorSummary xsi:nil="true" />
 </uws:job>

{astroquery-0.4.12.dev10885 → astroquery-0.4.12.dev11095}/astroquery/casda/tests/test_casda.py

@@ -2,10 +2,12 @@
 
 # Licensed under a 3-clause BSD style license - see LICENSE.rst
 
+import contextlib
 import pytest
 import requests
 import os
 import keyring
+from urllib.parse import urlparse
 
 from astropy.coordinates import SkyCoord
 import astropy.units as u
@@ -18,6 +20,14 @@ import numpy as np
 
 from astroquery.casda import Casda
 from astroquery.exceptions import LoginError
+from astroquery.utils.commons import ASTROPY_LT_8_1
+
+# Hackary around W58 which was newly added into astropy v8.1.
+if not ASTROPY_LT_8_1:
+    from astropy.io.votable.exceptions import W58
+    astropy81_cm = pytest.warns(W58)
+else:
+    astropy81_cm = contextlib.nullcontext()
 
 try:
     from unittest.mock import Mock, MagicMock
@@ -272,7 +282,7 @@ def test_query_region_async_box(patch_get):
 
 
 def test_filter_out_unreleased():
-    with pytest.warns(W03):
+    with pytest.warns(W03), astropy81_cm:
         all_records = parse(data_path('partial_unreleased.xml'), verify='warn').get_first_table().to_table()
     assert all_records[0]['obs_release_date'] == '2017-08-02T03:51:19.728Z'
     assert all_records[1]['obs_release_date'] == '2218-01-02T16:51:00.728Z'
@@ -337,8 +347,25 @@ def test_stage_data(patch_get):
     casda.POLL_INTERVAL = 1
     with pytest.warns(W50, match="Invalid unit string 'pixels'"):
         urls = casda.stage_data(table, verbose=True)
+    presigned_url = ('https://ingest.pawsey.org.au/casda-prd-as201-03/sb85679/catalogues/selavy.components.xml?'
+                     'response-content-disposition=attachment%3B%20filename%3D%22selavy.components.xml%22'
+                     '&X-Amz-Algorithm=AWS4-HMAC-SHA256'
+                     '&X-Amz-Credential=abc123%2F20260722%2Fpawsey%2Fs3%2Faws4_request'
+                     '&X-Amz-Signature=deadbeef1234567890')
     assert urls == ['http://casda.csiro.au/download/web/111-000-111-000/askap_img.fits.checksum',
-                    'http://casda.csiro.au/download/web/111-000-111-000/askap_img.fits']
+                    'http://casda.csiro.au/download/web/111-000-111-000/askap_img.fits',
+                    presigned_url]
+
+    # The pre-signed S3 URL must keep its percent-encoding intact (it is part of the AWS signature)
+    # and must not contain characters that are illegal in a URL such as spaces, ';' or '"'.
+    assert '%3B' in presigned_url and '%20' in presigned_url and '%2F' in presigned_url
+    assert ' ' not in presigned_url
+    assert ';' not in presigned_url
+    assert '"' not in presigned_url
+    # urllib must be able to parse it without raising
+    parsed = urlparse(presigned_url)
+    assert parsed.scheme == 'https'
+    assert parsed.netloc == 'ingest.pawsey.org.au'
 
 
 def test_cutout(patch_get):

{astroquery-0.4.12.dev10885 → astroquery-0.4.12.dev11095}/astroquery/esa/euclid/__init__.py

@@ -49,16 +49,16 @@ class Conf(_config.ConfigNamespace):
 
     MOSAIC_PRODUCTS = ['DpdMerBksMosaic']
 
-    BASIC_DOWNLOAD_DATA_PRODUCTS = ['dpdPhzPfOutputForL3', 'dpdPhzPfOutputCatalog', 'dpdMerFinalCatalog',
-                                    'dpdSpePfOutputCatalog', 'dpdSheLensMcChains', 'dpdHealpixBitMaskVMPZ',
-                                    'dpdHealpixFootprintMaskVMPZ', 'dpdHealpixCoverageVMPZ', 'dpdHealpixDepthMapVMPZ',
-                                    'dpdHealpixInfoMapVMPZ', 'dpdSheBiasParams', 'dpdSheLensMcFinalCatalog',
-                                    'dpdSheLensMcRawCatalog', 'dpdSheMetaCalFinalCatalog', 'dpdSheMetaCalRawCatalog',
-                                    'dpdSleDetectionOutput', 'dpdSleModelOutput']
+    BASIC_DOWNLOAD_DATA_PRODUCTS = ['DpdPhzPfOutputForL3', 'DpdPhzPfOutputCatalog', 'DpdPhzDeepOutputCatalog',
+                                    'DpdMerFinalCatalog', 'DpdSpePfOutputCatalog', 'DpdSheLensMcChains',
+                                    'DpdHealpixBitMaskVMPZ', 'DpdHealpixFootprintMaskVMPZ', 'DpdHealpixCoverageVMPZ',
+                                    'DpdHealpixDepthMapVMPZ', 'DpdHealpixInfoMapVMPZ', 'DpdSheBiasParams',
+                                    'DpdSheLensMcFinalCatalog', 'DpdSheLensMcRawCatalog', 'DpdSheMetaCalFinalCatalog',
+                                    'DpdSheMetaCalRawCatalog', 'DpdSleDetectionOutput']
 
     MER_SEGMENTATION_MAP_PRODUCTS = ['DpdMerSegmentationMap']
 
-    RAW_FRAME_PRODUCTS = ['dpdVisRawFrame', 'dpdNispRawFrame']
+    RAW_FRAME_PRODUCTS = ['DpdVisRawFrame', 'DpdNispRawFrame']
 
     CALIBRATED_FRAME_PRODUCTS = ['DpdVisCalibratedQuadFrame', 'DpdNirCalibratedFrame']
 
@@ -67,7 +67,7 @@ class Conf(_config.ConfigNamespace):
 
     COMBINED_SPECTRA_PRODUCTS = ['DpdSirCombinedSpectra']
 
-    SIR_SCIENCE_FRAME_PRODUCTS = ['dpdSirScienceFrame']
+    SIR_SCIENCE_FRAME_PRODUCTS = ['DpdSirScienceFrame']
 
     PRODUCT_TYPES = ['observation', 'mosaic']