arrayview 0.21.0__tar.gz → 0.23.0__tar.gz

{arrayview-0.21.0 → arrayview-0.23.0}/.mex/AGENTS.md

@@ -1,7 +1,7 @@
 ---
 name: agents
 description: Lightweight pointer to ROUTER.md for task routing.
-last_updated: 2026-05-01
+last_updated: 2026-05-16
 ---
 
 # arrayview

{arrayview-0.21.0 → arrayview-0.23.0}/.mex/ROUTER.md

@@ -22,7 +22,7 @@ edges:
     condition: when starting a task — check the pattern index for a matching pattern file
   - target: ../DESIGN.md
     condition: when the task touches design philosophy — new features, UI changes, mode additions, or interaction model decisions
-last_updated: 2026-05-02
+last_updated: 2026-05-16
 ---
 
 # arrayview — Router

{arrayview-0.21.0 → arrayview-0.23.0}/.mex/SETUP.md

@@ -1,5 +1,7 @@
 # Setup — Populate This Scaffold
 
+Last reviewed: 2026-05-16
+
 This file contains the prompts to populate the scaffold. It is NOT the dev environment setup — for that, see `context/setup.md` after population.
 
 This scaffold is currently empty. Follow the steps below to populate it for your project.

{arrayview-0.21.0 → arrayview-0.23.0}/.mex/SYNC.md

@@ -1,5 +1,7 @@
 # Sync — Realign This Scaffold
 
+Last reviewed: 2026-05-16
+
 ## Recommended: Use sync.sh
 
 ```bash

{arrayview-0.21.0 → arrayview-0.23.0}/.mex/context/conventions.md

@@ -18,7 +18,7 @@ edges:
     condition: when applying frontend conventions (section separators, reconcilers, command registry)
   - target: context/render-pipeline.md
     condition: when applying render pipeline conventions (pipeline order, cache patterns, LUT usage)
-last_updated: 2026-04-29
+last_updated: 2026-05-16
 ---
 
 # Conventions

{arrayview-0.21.0 → arrayview-0.23.0}/.mex/context/decisions.md

@@ -14,7 +14,7 @@ edges:
     condition: when a decision relates to technology choice
   - target: context/frontend.md
     condition: when a decision relates to the frontend architecture or viewer modes
-last_updated: 2026-04-29
+last_updated: 2026-05-16
 ---
 
 # Decisions

{arrayview-0.21.0 → arrayview-0.23.0}/.mex/context/frontend.md

@@ -18,7 +18,7 @@ edges:
     condition: when writing new frontend code and need section separator conventions
   - target: patterns/frontend-change.md
     condition: when making a concrete change to _viewer.html
-last_updated: 2026-05-01
+last_updated: 2026-05-16
 ---
 
 # Frontend (_viewer.html)

{arrayview-0.21.0 → arrayview-0.23.0}/.mex/context/project-state.md

@@ -7,7 +7,7 @@ triggers:
   - "recent work"
   - "active feature"
   - "shipped recently"
-last_updated: 2026-05-05
+last_updated: 2026-05-13
 ---
 
 # Project State
@@ -36,9 +36,18 @@ last_updated: 2026-05-05
 - Island collapse affordance: inline `~` at the island's top-right animates the panel into the bottom-left `~` hint circle; external `~` hint only visible while the island is actually collapsed. New `/` hint circle at bottom-right opens the tool menu
 - Compare center tool menu: `/` now re-opens the last-used compare center mode from the tool menu, while compare pane header buttons select diff / overlay / wipe directly. Eligible two-array compare layouts can switch into a big-left arrangement with a wider center pane, and the diff colorbar now matches that center-pane width.
 - Compare center + ortho auto-layout: layout choice is now auto-picked once on entry from a shared viewport-profile helper, stays stable across resize, and becomes sticky only after manual `G` / `g` override. Compare big-left also now supports in-pane A/B source badges and a shared source colorbar parked in the gap between the stacked source panes.
+- Detached compare-on-X: with a single array and a non-spatial active dimension, `X` now enters compare mode by treating two indices from that dimension as A/B sources. Pane titles switch to index-over-total labels, the dimbar marks the detached dimension with a purple `X`, `[` / `]` scrub the left pane index, `{` / `}` scrub the right pane index, and repeated `X` presses cycle the existing compare-center modes before exiting back to normal view. The split-index diff path now works in both FastAPI and stdio transports.
 
 ## Recently Completed
 
+- Shift+C colormap picker redesign: the old centered shortlist is now a narrow translucent right-edge drawer with a close button, a yellow `Colormaps` title plus a `Favorites` subtitle, and a plain 12-swatch two-column quick set that stays visible above the search field. Search matches render in a separate results area below the input, Enter first exits the search field before a second Enter commits, arrow-key movement follows the visible two-column grid, and repeated `c` presses cycle through the currently visible swatches while the picker is open.
+- Detached compare-on-X: single-array non-spatial dimensions now support the same compare-center family as two-array compare. The frontend reuses compare mode with per-pane detached indices, the dimbar shows a purple `X`, the compare titles show index-over-total labels, `[` / `]` control pane A, `{` / `}` control pane B, and repeated `X` exits detached compare after cycling the center modes. Focused coverage now includes a browser regression for detached entry/scrubbing/exit plus API coverage for split `/diff` indices on the same session.
+- Normal-mode dimbar readability: inactive non-spatial dims no longer get a blanket reduced parent opacity, so the current index reads bright while `/total` stays subdued via the existing child dim-size styling.
+- Multiview colorbar spacing now matches normal mode: entering ortho with `v` and switching to orthogonal `big-left` with `g` no longer increases the pane-to-colorbar gap. Focused browser coverage now compares the normal-view gap against both multiview layouts directly.
+- V-mode ortho layout cycling is now a two-state toggle: `g` only switches between `horizontal` and `big-left`. The old `vertical` and `big-top` multiview presets have been removed from the shared ortho preset table, the hold-`g` picker/help text, and the remaining big-pane promotion branches, and the shared multiview colorbar width now stays fixed when `g` toggles between the two surviving layouts.
+- The old snapshot gallery sidecar has been removed from the viewer. Saving a screenshot still downloads the PNG, but `Shift+G` no longer toggles any screenshot/gallery UI outside compare mode; `G` is now compare-layout cycling only.
+- Loupe activation no longer arms on a plain left-button hold. Normal view and multiview panes now use `Ctrl` hover with no mouse button, so plain drag stays available for pane navigation and other mode-specific gestures. While `Ctrl` is held, wheel input keeps its normal slice-scroll behavior instead of being swallowed or repurposed for zoom, and the loupe now redraws when those wheel-driven slice changes land. Focused browser coverage now checks both the normal-view and multiview `Ctrl` hover paths plus `Ctrl`-wheel scrolling and loupe-refresh behavior. qMRI loupe wiring was updated to match, but direct qMRI browser validation is currently blocked by the qMRI reusable-URL browser test in `tests/test_browser.py`.
+- Jupyter inline notebooks now default to `height=600`, start in normal mode instead of auto-immersive, and top-align the viewer cluster instead of vertically centering it inside the output cell. This removes the wasted band above the dimbar / below the colorbar while preserving manual `Shift+F` immersive entry. Browser coverage now checks the non-immersive inline start state and low wrapper top padding.
 - Architecture followthrough: `_server.py` route extraction is complete. Feature domains now live in `_routes_analysis.py`, `_routes_loading.py`, `_routes_persistence.py`, `_routes_segmentation.py`, `_routes_state.py`, `_routes_query.py`, `_routes_export.py`, `_routes_preload.py`, `_routes_vectorfield.py`, `_routes_rendering.py`, and `_routes_websocket.py`. `_server.py` is now the intended assembly surface: FastAPI app setup, shared dependency injection, HTML/template helpers, and the small infrastructure routes for health/UI/assets/colormap metadata.
 - Focused API coverage now directly guards segmentation activate/scribble/click-accept/export paths, export/preload/vectorfield routes, slice/projection/diff/grid/gif rendering, large-array grid/gif guardrails, and websocket metadata plus shell-close cleanup.
 

{arrayview-0.21.0 → arrayview-0.23.0}/.mex/context/render-pipeline.md

@@ -20,7 +20,7 @@ edges:
     condition: when writing new render functions or extending the pipeline
   - target: patterns/debug-render.md
     condition: when a render produces wrong output or the wrong cache is hit
-last_updated: 2026-04-29
+last_updated: 2026-05-16
 ---
 
 # Render Pipeline

{arrayview-0.21.0 → arrayview-0.23.0}/.mex/context/setup.md

@@ -13,7 +13,7 @@ edges:
     condition: when specific technology versions or library details are needed
   - target: context/architecture.md
     condition: when understanding how components connect during setup
-last_updated: 2026-04-29
+last_updated: 2026-05-16
 ---
 
 # Setup

{arrayview-0.21.0 → arrayview-0.23.0}/.mex/context/stack.md

@@ -50,7 +50,7 @@ last_updated: 2026-04-29
 - **No concurrent.futures for the render thread** — uses `threading.Thread` + `SimpleQueue` directly to avoid CPython's `_global_shutdown` executor cleanup racing with daemon threads during interpreter exit.
 - **No ORM / database** — sessions are in-memory Python dicts; no SQLAlchemy, no SQLite.
 - **No Redux or client-side state management library** — viewer state is plain JS variables in `_viewer.html`.
-- **No CSS framework** — all styles are custom properties in `:root`; the shipped themes are dark, light, solarized, and nord.
+- **No CSS framework** — all styles are custom properties in `:root`; the shipped themes are dark and light.
 
 ## Version Constraints
 

{arrayview-0.21.0 → arrayview-0.23.0}/.mex/patterns/INDEX.md

@@ -28,5 +28,6 @@ Lookup table for all pattern files in this directory. Check here before starting
 | [add-server-endpoint.md](add-server-endpoint.md) | Adding a new REST or WebSocket route to `_server.py` |
 | [debug-vscode-extension-python.md](debug-vscode-extension-python.md) | Diagnosing VS Code custom-editor failures caused by Python selection, workspace virtualenv drift, or uv fallback behavior |
 | [debug-render.md](debug-render.md) | Visual rendering failures — wrong colors, blank canvas, artifacts, colormap issues |
+| [extend-compare-mode.md](extend-compare-mode.md) | Extending compare mode in `_viewer.html`, including new compare entry paths, pane labels, or per-pane diff/render state |
 | [extract-server-route-module.md](extract-server-route-module.md) | Moving an existing route cluster out of `_server.py` into a dedicated `_routes_*.py` module |
 | [frontend-change.md](frontend-change.md) | Any change to `_viewer.html` — CSS, JS, new mode, keybind, layout, colorbar |

{arrayview-0.21.0 → arrayview-0.23.0}/.mex/patterns/README.md

@@ -1,5 +1,7 @@
 # Patterns
 
+Last reviewed: 2026-05-16
+
 This folder contains task-specific guidance — the things you would tell your agent if you were sitting next to it. Not generic instructions. Project-specific accumulated wisdom.
 
 ## How patterns get created

{arrayview-0.21.0 → arrayview-0.23.0}/.mex/patterns/add-file-format.md

@@ -15,7 +15,7 @@ edges:
     condition: for the lazy import pattern and Verify Checklist
   - target: context/render-pipeline.md
     condition: when the new format returns an unusual dtype that may affect the render pipeline
-last_updated: 2026-04-29
+last_updated: 2026-05-16
 ---
 
 # Add File Format

{arrayview-0.21.0 → arrayview-0.23.0}/.mex/patterns/add-server-endpoint.md

@@ -16,7 +16,7 @@ edges:
     condition: when the endpoint triggers a render (slice, mosaic, projection)
   - target: context/conventions.md
     condition: for lazy import rules and Verify Checklist
-last_updated: 2026-04-29
+last_updated: 2026-05-16
 ---
 
 # Add Server Endpoint

{arrayview-0.21.0 → arrayview-0.23.0}/.mex/patterns/animation-verify.md

@@ -16,7 +16,7 @@ triggers:
 edges:
   - target: patterns/frontend-change.md
     condition: always — animation changes are always frontend changes
-last_updated: 2026-04-29
+last_updated: 2026-05-16
 ---
 
 # Animation Verify

{arrayview-0.21.0 → arrayview-0.23.0}/.mex/patterns/debug-render.md

@@ -22,7 +22,7 @@ edges:
     condition: only after Step 1 points to `_viewer.html` rather than the Python pipeline
   - target: context/conventions.md
     condition: for the Verify Checklist after fixing
-last_updated: 2026-04-29
+last_updated: 2026-05-16
 ---
 
 # Debug Render

{arrayview-0.21.0 → arrayview-0.23.0}/.mex/patterns/debug-vscode-extension-python.md

@@ -12,7 +12,7 @@ triggers:
 edges:
   - target: context/conventions.md
     condition: when making code changes after confirming the failure mode
-last_updated: 2026-05-06
+last_updated: 2026-05-16
 ---
 
 # Debug VS Code Extension Python
@@ -38,7 +38,7 @@ an unsatisfiable dependency error.
 
 1. **Check the extension log first**
    ```bash
-   tail -n 120 ~/.arrayview/extension.log
+   tail -n 120 "$HOME/.arrayview/extension.log"
    ```
    Look for `CUSTOM-EDITOR:`, `PYTHON: spawning`, stderr lines, and the final exit code.
 
@@ -80,11 +80,11 @@ an unsatisfiable dependency error.
 
 - Running `python -m arrayview --mode stdio ...` directly from a shell script without redirecting stdin can feed shell text into the stdio server. Use `</dev/null` for bounded startup checks.
 - In tunnel workspaces, the clicked-file custom editor does **not** use the current repo checkout automatically unless that workspace `.venv` points to it.
-- A reboot or deleting `~/.vscode-server` can change the default interpreter resolution without changing the extension code.
+- A reboot or deleting the VS Code server directory under the user's home directory can change the default interpreter resolution without changing the extension code.
 
 ## Verify
 
-- [ ] `~/.arrayview/extension.log` shows the expected candidate order
+- [ ] The ArrayView extension log under the user's home directory shows the expected candidate order
 - [ ] The failing workspace reproducer emits `SESSION:{...}` with the intended interpreter
 - [ ] If `extension.js` changed, `vscode-extension/package.json`, `_VSCODE_EXT_VERSION`, and the VSIX version all match
 - [ ] After reinstalling or reloading, the custom editor opens the target array without `Python process exited with code 1`
@@ -92,4 +92,4 @@ an unsatisfiable dependency error.
 ## Update Scaffold
 - [ ] Update `.mex/context/project-state.md` if the shipped fallback behavior changed
 - [ ] Update any `.mex/context/` files that are now out of date
-- [ ] Add this pattern to `.mex/patterns/INDEX.md`
+- [ ] Add this pattern to `.mex/patterns/INDEX.md`

arrayview-0.23.0/.mex/patterns/extend-compare-mode.md

@@ -0,0 +1,60 @@
+---
+name: extend-compare-mode
+description: Extending compare mode in `_viewer.html` — new compare entry paths, pane labeling, center-mode behavior, or compare-specific per-pane render state.
+triggers:
+  - "compare mode"
+  - "compare center"
+  - "detached compare"
+  - "pane titles"
+  - "diff params"
+  - "X key"
+edges:
+  - target: patterns/frontend-change.md
+    condition: when the work is primarily a local `_viewer.html` edit
+  - target: context/render-pipeline.md
+    condition: when compare changes require backend render or diff parameter changes
+last_updated: 2026-05-13
+---
+
+# Extend Compare Mode
+
+## Context
+
+Compare behavior is split across a few tight surfaces:
+- state near `compareCenterMode` and `compareSid`
+- pane titles in `updateCompareTitles()`
+- frame fetching in `compareRender()`
+- center diff fetching in `fetchAndDrawDiff()` and `_fetchDiffHistogram()`
+- command and keybinding routing near `compare.cycleCenterMode`
+- compare teardown in `exitCompareMode()`
+
+If the feature changes diff request parameters, keep HTTP and stdio parity by updating `_routes_rendering.py`, `_stdio_server.py`, and `_diff.py` together.
+
+## Steps
+
+1. Add new compare-specific state beside the existing compare globals, not in unrelated mode sections.
+2. Reuse compare entry helpers when possible. If the feature behaves like compare but changes where panes read from, prefer a small wrapper entry function over a parallel mode implementation.
+3. Update pane labeling in `updateCompareTitles()` so the titles reflect compare state directly.
+4. If pane sources can diverge, update both `compareRender()` and the center diff/histogram fetch path to build per-pane request params.
+5. Route keyboard behavior through the command registry and keybind list together. If a key changes meaning in compare mode, add a compare-scoped command before the generic fallback binding.
+6. Clear all new compare state in `exitCompareMode()`.
+7. Update `GUIDE_TABS` whenever the key behavior or compare affordances change.
+
+## Gotchas
+
+- `compareDisplaySids` can lag initial compare entry; if 2-pane support matters immediately, also account for `_compareExplicitSids`.
+- A compare feature that changes `/diff` params must update `_fetchDiffHistogram()` too, not just `fetchAndDrawDiff()`.
+- Detached or synthetic compare sources should not leak into saved `compare_sid` URL/session state unless restore explicitly supports them.
+- `[` and `]` already mean “adjust compare parameter” in several center modes. New compare-local bindings must be ordered ahead of the generic bracket handler.
+
+## Verify
+
+- [ ] Focused browser test for compare entry or the new entry path passes
+- [ ] Focused browser test for `X` / compare-center behavior passes
+- [ ] If diff params changed, focused API coverage for `/diff` passes
+- [ ] If diff histogram depends on the same params, verify histogram path too
+
+## Update Scaffold
+
+- [ ] Update `.mex/context/project-state.md` when compare behavior changes
+- [ ] Add this pattern to `.mex/patterns/INDEX.md` if it is new

{arrayview-0.21.0 → arrayview-0.23.0}/.mex/patterns/extract-server-route-module.md

@@ -11,7 +11,7 @@ edges:
     condition: when deciding whether `_server.py` should keep or delegate a route cluster
   - target: context/project-state.md
     condition: when the extraction changes the active architecture workstream
-last_updated: 2026-04-29
+last_updated: 2026-05-16
 ---
 
 # Extract Server Route Module

{arrayview-0.21.0 → arrayview-0.23.0}/.mex/patterns/frontend-change.md

@@ -16,7 +16,7 @@ edges:
     condition: for shared conventions and the Verify Checklist
   - target: patterns/debug-render.md
     condition: when the change produces wrong visual output
-last_updated: 2026-05-01
+last_updated: 2026-05-16
 ---
 
 # Frontend Change

arrayview-0.23.0/.playwright-cli/page-2026-05-06T18-46-49-737Z.yml

@@ -0,0 +1,30 @@
+- generic [ref=e1]:
+  - generic [ref=e2]:
+    - generic:
+      - img
+    - generic [ref=e3]: Connecting...
+    - generic:
+      - generic:
+        - generic: "The histogram and percentile limits are computed over a volume, not just the current 2D slice. A dim can be fully included in that volume (scoped), or only its current position counts. Dims that aren't fully included can either recompute limits when scrolled, or stay frozen. Click a dim to cycle: scoped → recompute → frozen."
+        - generic:
+          - generic: IN SCOPE
+          - generic:
+            - strong: Full range in volume. Scrolling doesn't change limits.
+        - generic:
+          - generic: RECOMPUTE
+          - generic:
+            - strong: Current position only. Scrolling recalculates limits.
+        - generic:
+          - generic: FROZEN
+          - generic:
+            - strong: Current position only. Limits stay fixed.
+      - generic:
+        - img
+    - textbox [active] [ref=e4]
+    - generic [ref=e5] [cursor=pointer]: "?"
+    - generic "Open tools (/)" [ref=e6] [cursor=pointer]: /
+  - generic [ref=e8]:
+    - generic [ref=e9]: Snapshots
+    - generic [ref=e10]: "0"
+    - button "⤓" [ref=e11] [cursor=pointer]
+    - button "×" [ref=e12] [cursor=pointer]

arrayview-0.23.0/.playwright-cli/page-2026-05-06T18-48-21-979Z.yml

@@ -0,0 +1,36 @@
+- generic [ref=e1]:
+  - generic [ref=e2]:
+    - generic [ref=e3]:
+      - generic [ref=e4] [cursor=pointer]: x/224
+      - text: ·
+      - generic [ref=e5] [cursor=pointer]: y/240
+      - text: ·
+      - generic [ref=e6] [cursor=pointer]: 103/204
+      - text: ·
+      - generic [ref=e7] [cursor=pointer]: 1/6
+    - generic:
+      - generic:
+        - generic: "The histogram and percentile limits are computed over a volume, not just the current 2D slice. A dim can be fully included in that volume (scoped), or only its current position counts. Dims that aren't fully included can either recompute limits when scrolled, or stay frozen. Click a dim to cycle: scoped → recompute → frozen."
+        - generic:
+          - generic: IN SCOPE
+          - generic:
+            - strong: Full range in volume. Scrolling doesn't change limits.
+        - generic:
+          - generic: RECOMPUTE
+          - generic:
+            - strong: Current position only. Scrolling recalculates limits.
+        - generic:
+          - generic: FROZEN
+          - generic:
+            - strong: Current position only. Limits stay fixed.
+      - generic:
+        - img
+        - generic: parameter_maps.nii
+    - textbox [active] [ref=e14]
+    - generic [ref=e15] [cursor=pointer]: "?"
+    - generic "Open tools (/)" [ref=e16] [cursor=pointer]: /
+  - generic [ref=e18]:
+    - generic [ref=e19]: Snapshots
+    - generic [ref=e20]: "0"
+    - button "⤓" [ref=e21] [cursor=pointer]
+    - button "×" [ref=e22] [cursor=pointer]

arrayview-0.23.0/.playwright-cli/page-2026-05-06T18-51-35-665Z.yml

@@ -0,0 +1,36 @@
+- generic [ref=e1]:
+  - generic [ref=e2]:
+    - generic [ref=e3]:
+      - generic [ref=e4] [cursor=pointer]: x/224
+      - text: ·
+      - generic [ref=e5] [cursor=pointer]: y/240
+      - text: ·
+      - generic [ref=e6] [cursor=pointer]: 103/204
+      - text: ·
+      - generic [ref=e7] [cursor=pointer]: 1/6
+    - generic:
+      - generic:
+        - generic: "The histogram and percentile limits are computed over a volume, not just the current 2D slice. A dim can be fully included in that volume (scoped), or only its current position counts. Dims that aren't fully included can either recompute limits when scrolled, or stay frozen. Click a dim to cycle: scoped → recompute → frozen."
+        - generic:
+          - generic: IN SCOPE
+          - generic:
+            - strong: Full range in volume. Scrolling doesn't change limits.
+        - generic:
+          - generic: RECOMPUTE
+          - generic:
+            - strong: Current position only. Scrolling recalculates limits.
+        - generic:
+          - generic: FROZEN
+          - generic:
+            - strong: Current position only. Limits stay fixed.
+      - generic:
+        - img
+        - generic: parameter_maps.nii
+    - textbox [active] [ref=e14]
+    - generic [ref=e15] [cursor=pointer]: "?"
+    - generic "Open tools (/)" [ref=e16] [cursor=pointer]: /
+  - generic [ref=e18]:
+    - generic [ref=e19]: Snapshots
+    - generic [ref=e20]: "0"
+    - button "⤓" [ref=e21] [cursor=pointer]
+    - button "×" [ref=e22] [cursor=pointer]

arrayview-0.23.0/.playwright-cli/page-2026-05-06T19-07-01-393Z.yml

@@ -0,0 +1,36 @@
+- generic [ref=e1]:
+  - generic [ref=e2]:
+    - generic [ref=e3]:
+      - generic [ref=e4] [cursor=pointer]: x/224
+      - text: ·
+      - generic [ref=e5] [cursor=pointer]: y/240
+      - text: ·
+      - generic [ref=e6] [cursor=pointer]: 103/204
+      - text: ·
+      - generic [ref=e7] [cursor=pointer]: 1/6
+    - generic:
+      - generic:
+        - generic: "The histogram and percentile limits are computed over a volume, not just the current 2D slice. A dim can be fully included in that volume (scoped), or only its current position counts. Dims that aren't fully included can either recompute limits when scrolled, or stay frozen. Click a dim to cycle: scoped → recompute → frozen."
+        - generic:
+          - generic: IN SCOPE
+          - generic:
+            - strong: Full range in volume. Scrolling doesn't change limits.
+        - generic:
+          - generic: RECOMPUTE
+          - generic:
+            - strong: Current position only. Scrolling recalculates limits.
+        - generic:
+          - generic: FROZEN
+          - generic:
+            - strong: Current position only. Limits stay fixed.
+      - generic:
+        - img
+        - generic: parameter_maps.nii
+    - textbox [active] [ref=e14]
+    - generic [ref=e15] [cursor=pointer]: "?"
+    - generic "Open tools (/)" [ref=e16] [cursor=pointer]: /
+  - generic [ref=e18]:
+    - generic [ref=e19]: Snapshots
+    - generic [ref=e20]: "0"
+    - button "⤓" [ref=e21] [cursor=pointer]
+    - button "×" [ref=e22] [cursor=pointer]

arrayview-0.23.0/.playwright-cli/page-2026-05-06T19-14-37-969Z.yml

@@ -0,0 +1,36 @@
+- generic [ref=e1]:
+  - generic [ref=e2]:
+    - generic [ref=e3]:
+      - generic [ref=e4] [cursor=pointer]: x/224
+      - text: ·
+      - generic [ref=e5] [cursor=pointer]: y/240
+      - text: ·
+      - generic [ref=e6] [cursor=pointer]: 103/204
+      - text: ·
+      - generic [ref=e7] [cursor=pointer]: 1/6
+    - generic:
+      - generic:
+        - generic: "The histogram and percentile limits are computed over a volume, not just the current 2D slice. A dim can be fully included in that volume (scoped), or only its current position counts. Dims that aren't fully included can either recompute limits when scrolled, or stay frozen. Click a dim to cycle: scoped → recompute → frozen."
+        - generic:
+          - generic: IN SCOPE
+          - generic:
+            - strong: Full range in volume. Scrolling doesn't change limits.
+        - generic:
+          - generic: RECOMPUTE
+          - generic:
+            - strong: Current position only. Scrolling recalculates limits.
+        - generic:
+          - generic: FROZEN
+          - generic:
+            - strong: Current position only. Limits stay fixed.
+      - generic:
+        - img
+        - generic: parameter_maps.nii
+    - textbox [active] [ref=e14]
+    - generic [ref=e15] [cursor=pointer]: "?"
+    - generic "Open tools (/)" [ref=e16] [cursor=pointer]: /
+  - generic [ref=e18]:
+    - generic [ref=e19]: Snapshots
+    - generic [ref=e20]: "0"
+    - button "⤓" [ref=e21] [cursor=pointer]
+    - button "×" [ref=e22] [cursor=pointer]

arrayview-0.23.0/.playwright-cli/page-2026-05-06T19-21-30-940Z.yml

@@ -0,0 +1,36 @@
+- generic [ref=e1]:
+  - generic [ref=e2]:
+    - generic [ref=e3]:
+      - generic [ref=e4] [cursor=pointer]: x/224
+      - text: ·
+      - generic [ref=e5] [cursor=pointer]: y/240
+      - text: ·
+      - generic [ref=e6] [cursor=pointer]: 103/204
+      - text: ·
+      - generic [ref=e7] [cursor=pointer]: 1/6
+    - generic:
+      - generic:
+        - generic: "The histogram and percentile limits are computed over a volume, not just the current 2D slice. A dim can be fully included in that volume (scoped), or only its current position counts. Dims that aren't fully included can either recompute limits when scrolled, or stay frozen. Click a dim to cycle: scoped → recompute → frozen."
+        - generic:
+          - generic: IN SCOPE
+          - generic:
+            - strong: Full range in volume. Scrolling doesn't change limits.
+        - generic:
+          - generic: RECOMPUTE
+          - generic:
+            - strong: Current position only. Scrolling recalculates limits.
+        - generic:
+          - generic: FROZEN
+          - generic:
+            - strong: Current position only. Limits stay fixed.
+      - generic:
+        - img
+        - generic: parameter_maps.nii
+    - textbox [active] [ref=e14]
+    - generic [ref=e15] [cursor=pointer]: "?"
+    - generic "Open tools (/)" [ref=e16] [cursor=pointer]: /
+  - generic [ref=e18]:
+    - generic [ref=e19]: Snapshots
+    - generic [ref=e20]: "0"
+    - button "⤓" [ref=e21] [cursor=pointer]
+    - button "×" [ref=e22] [cursor=pointer]

arrayview-0.23.0/.playwright-cli/page-2026-05-06T19-23-08-126Z.yml

@@ -0,0 +1,36 @@
+- generic [ref=e1]:
+  - generic [ref=e2]:
+    - generic [ref=e3]:
+      - generic [ref=e4] [cursor=pointer]: x/224
+      - text: ·
+      - generic [ref=e5] [cursor=pointer]: y/240
+      - text: ·
+      - generic [ref=e6] [cursor=pointer]: 103/204
+      - text: ·
+      - generic [ref=e7] [cursor=pointer]: 1/6
+    - generic:
+      - generic:
+        - generic: "The histogram and percentile limits are computed over a volume, not just the current 2D slice. A dim can be fully included in that volume (scoped), or only its current position counts. Dims that aren't fully included can either recompute limits when scrolled, or stay frozen. Click a dim to cycle: scoped → recompute → frozen."
+        - generic:
+          - generic: IN SCOPE
+          - generic:
+            - strong: Full range in volume. Scrolling doesn't change limits.
+        - generic:
+          - generic: RECOMPUTE
+          - generic:
+            - strong: Current position only. Scrolling recalculates limits.
+        - generic:
+          - generic: FROZEN
+          - generic:
+            - strong: Current position only. Limits stay fixed.
+      - generic:
+        - img
+        - generic: parameter_maps.nii
+    - textbox [active] [ref=e14]
+    - generic [ref=e15] [cursor=pointer]: "?"
+    - generic "Open tools (/)" [ref=e16] [cursor=pointer]: /
+  - generic [ref=e18]:
+    - generic [ref=e19]: Snapshots
+    - generic [ref=e20]: "0"
+    - button "⤓" [ref=e21] [cursor=pointer]
+    - button "×" [ref=e22] [cursor=pointer]

arrayview-0.23.0/.playwright-cli/page-2026-05-06T19-29-33-155Z.yml

@@ -0,0 +1,41 @@
+- generic [ref=e1]:
+  - generic [ref=e2]:
+    - generic [ref=e3]:
+      - generic [ref=e4] [cursor=pointer]: x/64
+      - text: ·
+      - generic [ref=e5] [cursor=pointer]: y/64
+      - text: ·
+      - generic [ref=e6] [cursor=pointer]: 1/8
+    - generic [ref=e7]:
+      - generic:
+        - generic: "The histogram and percentile limits are computed over a volume, not just the current 2D slice. A dim can be fully included in that volume (scoped), or only its current position counts. Dims that aren't fully included can either recompute limits when scrolled, or stay frozen. Click a dim to cycle: scoped → recompute → frozen."
+        - generic:
+          - generic: IN SCOPE
+          - generic:
+            - strong: Full range in volume. Scrolling doesn't change limits.
+        - generic:
+          - generic: RECOMPUTE
+          - generic:
+            - strong: Current position only. Scrolling recalculates limits.
+        - generic:
+          - generic: FROZEN
+          - generic:
+            - strong: Current position only. Limits stay fixed.
+      - generic [ref=e9]:
+        - img:
+          - generic: x
+          - generic: "y"
+      - generic [ref=e14]:
+        - generic [ref=e15]: "328"
+        - generic [ref=e18]: "3.2e4"
+      - generic:
+        - img
+        - generic: arrayview_theme_check.npy
+    - textbox [active] [ref=e20]
+    - generic [ref=e21] [cursor=pointer]: "?"
+    - generic "Open tools (/)" [ref=e22] [cursor=pointer]: /
+  - generic [ref=e24]:
+    - generic [ref=e25]: Snapshots
+    - generic [ref=e26]: "0"
+    - button "⤓" [ref=e27] [cursor=pointer]
+    - button "×" [ref=e28] [cursor=pointer]

arrayview-0.23.0/.playwright-cli/page-2026-05-06T19-31-25-336Z.yml

@@ -0,0 +1,41 @@
+- generic [ref=e1]:
+  - generic [ref=e2]:
+    - generic [ref=e3]:
+      - generic [ref=e4] [cursor=pointer]: x/64
+      - text: ·
+      - generic [ref=e5] [cursor=pointer]: y/64
+      - text: ·
+      - generic [ref=e6] [cursor=pointer]: 1/8
+    - generic [ref=e7]:
+      - generic:
+        - generic: "The histogram and percentile limits are computed over a volume, not just the current 2D slice. A dim can be fully included in that volume (scoped), or only its current position counts. Dims that aren't fully included can either recompute limits when scrolled, or stay frozen. Click a dim to cycle: scoped → recompute → frozen."
+        - generic:
+          - generic: IN SCOPE
+          - generic:
+            - strong: Full range in volume. Scrolling doesn't change limits.
+        - generic:
+          - generic: RECOMPUTE
+          - generic:
+            - strong: Current position only. Scrolling recalculates limits.
+        - generic:
+          - generic: FROZEN
+          - generic:
+            - strong: Current position only. Limits stay fixed.
+      - generic [ref=e9]:
+        - img:
+          - generic: x
+          - generic: "y"
+      - generic [ref=e14]:
+        - generic [ref=e15]: "328"
+        - generic [ref=e18]: "3.2e4"
+      - generic:
+        - img
+        - generic: arrayview_theme_check.npy
+    - textbox [active] [ref=e20]
+    - generic [ref=e21] [cursor=pointer]: "?"
+    - generic "Open tools (/)" [ref=e22] [cursor=pointer]: /
+  - generic [ref=e24]:
+    - generic [ref=e25]: Snapshots
+    - generic [ref=e26]: "0"
+    - button "⤓" [ref=e27] [cursor=pointer]
+    - button "×" [ref=e28] [cursor=pointer]