ansys-fluent-core 0.29.dev1__tar.gz → 0.29.dev3__tar.gz

{ansys_fluent_core-0.29.dev1 → ansys_fluent_core-0.29.dev3}/PKG-INFO

@@ -1,6 +1,6 @@
 Metadata-Version: 2.3
 Name: ansys-fluent-core
-Version: 0.29.dev1
+Version: 0.29.dev3
 Summary: PyFluent provides Pythonic access to Ansys Fluent.
 Author-email: "ANSYS, Inc." <pyansys.core@ansys.com>
 Maintainer-email: "ANSYS, Inc." <pyansys.core@ansys.com>
@@ -11,7 +11,7 @@ Classifier: Programming Language :: Python :: 3
 Classifier: License :: OSI Approved :: MIT License
 Classifier: Operating System :: OS Independent
 Requires-Dist: ansys-api-fluent>=0.3.33
-Requires-Dist: ansys-platform-instancemanagement~=1.0
+Requires-Dist: ansys-platform-instancemanagement~=1.1
 Requires-Dist: ansys-tools-filetransfer>=0.1,<0.3
 Requires-Dist: ansys-units>=0.3.3,<0.5
 Requires-Dist: docker>=7.1.0

{ansys_fluent_core-0.29.dev1 → ansys_fluent_core-0.29.dev3}/doc/source/cheatsheet/cheat_sheet.qmd

@@ -185,7 +185,7 @@ cold_inlet.thermal.temperature.set_state(293.15)
 ### Cell zone conditions
 
 ```{python}
-elbow_fluid = pyfluent.FluidCellZone(solver, name="elbow-fluid")
+elbow_fluid = pyfluent.solver.FluidCellZone(solver, name="elbow-fluid")
 elbow_fluid.laminar.set_state(True)
 ```
 
@@ -232,7 +232,7 @@ from ansys.fluent.core import examples
 file_name = examples.download_file("mixing_elbow.cas.h5", "pyfluent/mixing_elbow")
 solver = pyfluent.launch_fluent()
 solver.settings.file.read_case(file_name=file_name)
-energy = pyfluent.Energy(solver)
+energy = pyfluent.solver.Energy(solver)
 energy.enabled.get_state()
 from pprint import pprint
 pprint(energy.get_state(), width=1)
@@ -247,7 +247,7 @@ pprint(energy.get_state(), width=1)
 ### Viscous model
 
 ```{python}
-vs = pyfluent.Viscous(solver)
+vs = pyfluent.solver.Viscous(solver)
 from pprint import pprint
 pprint(vs.get_state(), width=1)
 pprint(vs.model.allowed_values(), width=1)
@@ -267,7 +267,7 @@ vs_ops.production_kato_launder_enabled.is_active()
 ### Discrete phase model
 
 ```{python}
-dpm = pyfluent.DiscretePhase(solver)
+dpm = pyfluent.solver.DiscretePhase(solver)
 dpm_models = dpm.physical_models
 dpm_vmf = dpm_models.virtual_mass_force
 dpm_vmf.enabled.get_state()
@@ -279,7 +279,7 @@ dpm_vmf.virtual_mass_factor.get_state()
 ### Radiation model
 
 ```{python}
-rn = pyfluent.Radiation(solver)
+rn = pyfluent.solver.Radiation(solver)
 from pprint import pprint
 pprint(rn.get_state(), width=1)
 pprint(rn.model.allowed_values(), width=1)
@@ -303,7 +303,7 @@ pprint(rn.get_state(), width=1)
 
 ```{python}
 solver.settings.file.read_case(file_name=file_name)
-species = pyfluent.Species(solver)
+species = pyfluent.solver.Species(solver)
 species.get_state()
 from pprint import pprint
 pprint(species.model.option.allowed_values(), width=1)
@@ -316,7 +316,7 @@ species.model.material.allowed_values()
 ### Battery model
 
 ```{python}
-battery = pyfluent.Battery(solver)
+battery = pyfluent.solver.Battery(solver)
 battery.enabled.set_state(True)
 battery.solution_method.allowed_values()
 ```
@@ -324,7 +324,7 @@ battery.solution_method.allowed_values()
 ### Steady or transient solution model
 
 ```{python}
-setup = pyfluent.Setup(solver)
+setup = pyfluent.solver.Setup(solver)
 solver_time = setup.general.solver.time
 solver_time.get_state()
 solver_time.allowed_values()
@@ -334,7 +334,7 @@ solver_time.set_state("unsteady-1st-order")
 ### Pressure-based or density-based solver
 
 ```{python}
-setup = pyfluent.Setup(solver)
+setup = pyfluent.solver.Setup(solver)
 solver_type = setup.general.solver.type
 solver_type.get_state()
 solver_type.allowed_values()
@@ -345,7 +345,7 @@ solver_type.get_state()
 ### Velocity coupling scheme and gradient options
 
 ```{python}
-methods = pyfluent.Methods(solver)
+methods = pyfluent.solver.Methods(solver)
 flow_scheme = methods.p_v_coupling.flow_scheme
 flow_scheme.allowed_values()
 flow_scheme.set_state("Coupled")
@@ -357,7 +357,7 @@ gradient_scheme.set_state("green-gauss-node-based")
 ### Solution controls
 
 ```{python}
-controls = pyfluent.Controls(solver)
+controls = pyfluent.solver.Controls(solver)
 pvc = controls.p_v_controls
 emur = pvc.explicit_momentum_under_relaxation
 emur.min()
@@ -372,7 +372,7 @@ flow_courant_number.set_state(0.3)
 ### Create a report definition
 
 ```{python}
-rep_defs = pyfluent.ReportDefinitions(solver)
+rep_defs = pyfluent.solver.ReportDefinitions(solver)
 surface = rep_defs.surface
 defn_name = "outlet-temp-avg"
 surface[defn_name] = {}

{ansys_fluent_core-0.29.dev1 → ansys_fluent_core-0.29.dev3}/doc/source/user_guide/solver_settings/set_up/boundary_conditions.rst

@@ -33,5 +33,5 @@ Cell zone conditions
 
 .. code:: python
 
-    >>> elbow_fluid = pyfluent.FluidCellZone(settings_source=solver, name="elbow-fluid")
+    >>> elbow_fluid = pyfluent.solver.FluidCellZone(settings_source=solver, name="elbow-fluid")
     >>> elbow_fluid.laminar.set_state(True)

{ansys_fluent_core-0.29.dev1 → ansys_fluent_core-0.29.dev3}/doc/source/user_guide/solver_settings/set_up/materials.rst

@@ -34,7 +34,7 @@ Copy material from database
      'sutherland',
      'kinetic-theory']
     >>> air_copy.viscosity.value.set_state(1.81e-05)
-    >>> elbow_fluid = pyfluent.FluidCellZone(settings_source=solver, name="elbow-fluid")
+    >>> elbow_fluid = pyfluent.solver.FluidCellZone(settings_source=solver, name="elbow-fluid")
     >>> elbow_fluid.material.set_state("air-2")
 
 

{ansys_fluent_core-0.29.dev1 → ansys_fluent_core-0.29.dev3}/doc/source/user_guide/solver_settings/set_up/models/battery.rst

@@ -7,7 +7,7 @@ Setting up and querying the model
 .. code:: python
 
     >>> import ansys.fluent.core as pyfluent
-    >>> battery = pyfluent.Battery(settings_source=solver)
+    >>> battery = pyfluent.solver.Battery(settings_source=solver)
     >>> battery.enabled.set_state(True)
     >>> battery.solution_method.allowed_values()
     ['cht-coupling', 'fmu-cht-coupling', 'circuit-network', 'msmd', 'msmd-rom']

{ansys_fluent_core-0.29.dev1 → ansys_fluent_core-0.29.dev3}/doc/source/user_guide/solver_settings/set_up/models/dpm.rst

@@ -7,7 +7,7 @@ Setting up and querying the model
 .. code:: python
 
     >>> import ansys.fluent.core as pyfluent
-    >>> dpm = pyfluent.DiscretePhase(settings_source=solver)
+    >>> dpm = pyfluent.solver.DiscretePhase(settings_source=solver)
     >>> dpm_models = dpm.physical_models
     >>> dpm_models.virtual_mass_force.enabled.get_state()
     >>> dpm_models.virtual_mass_force.virtual_mass_factor.is_active()

{ansys_fluent_core-0.29.dev1 → ansys_fluent_core-0.29.dev3}/doc/source/user_guide/solver_settings/set_up/models/energy.rst

@@ -11,7 +11,7 @@ Setting up and querying the model
     >>> file_name = examples.download_file("mixing_elbow.cas.h5", "pyfluent/mixing_elbow")
     >>> solver = pyfluent.launch_fluent()
     >>> solver.settings.file.read_case(file_name=file_name)
-    >>> energy = pyfluent.Energy(settings_source=solver)
+    >>> energy = pyfluent.solver.Energy(settings_source=solver)
     >>> energy.enabled.get_state()
     True
     >>> from pprint import pprint

{ansys_fluent_core-0.29.dev1 → ansys_fluent_core-0.29.dev3}/doc/source/user_guide/solver_settings/set_up/models/radiation.rst

@@ -7,7 +7,7 @@ Setting up and querying the model
 .. code:: python
 
     >>> import ansys.fluent.core as pyfluent
-    >>> radiation = pyfluent.Radiation(settings_source=solver)
+    >>> radiation = pyfluent.solver.Radiation(settings_source=solver)
     >>> from pprint import pprint
     >>> pprint(radiation.get_state(), width=1)
     {'model': 'none',

{ansys_fluent_core-0.29.dev1 → ansys_fluent_core-0.29.dev3}/doc/source/user_guide/solver_settings/set_up/models/species.rst

@@ -8,7 +8,7 @@ Setting up and querying the model
 
     >>> import ansys.fluent.core as pyfluent
     >>> solver.settings.file.read_case(file_name=file_name)
-    >>> species = pyfluent.Species(settings_source=solver)
+    >>> species = pyfluent.solver.Species(settings_source=solver)
     >>> species.get_state()
     {'model': {'option': 'off', 'number_vol_spec': False}}
     >>> from pprint import pprint

{ansys_fluent_core-0.29.dev1 → ansys_fluent_core-0.29.dev3}/doc/source/user_guide/solver_settings/set_up/models/viscous.rst

@@ -7,7 +7,7 @@ Setting up and querying the model
 .. code:: python
 
     >>> import ansys.fluent.core as pyfluent
-    >>> viscous = pyfluent.Viscous(settings_source=solver)
+    >>> viscous = pyfluent.solver.Viscous(settings_source=solver)
     >>> from pprint import pprint
     >>> pprint(viscous.get_state(), width=1)
     {'k_omega_model': 'sst',

{ansys_fluent_core-0.29.dev1 → ansys_fluent_core-0.29.dev3}/doc/source/user_guide/solver_settings/solution.rst

@@ -9,7 +9,7 @@ Steady or transient solution model
 
 .. code:: python
 
-  >>> setup = pyfluent.Setup(settings_source=solver)
+  >>> setup = pyfluent.solver.Setup(settings_source=solver)
   >>> solver_time = setup.general.solver.time
   >>> solver_time.get_state()
   'steady'
@@ -23,7 +23,7 @@ Pressure-based or density-based solver
 
 .. code:: python
 
-  >>> setup = pyfluent.Setup(settings_source=solver)
+  >>> setup = pyfluent.solver.Setup(settings_source=solver)
   >>> solver_type = setup.general.solver.type
   >>> solver_type.get_state()
   'pressure-based'
@@ -39,7 +39,7 @@ Velocity coupling scheme and gradient options
     
 .. code:: python
 
-  >>> methods = pyfluent.Methods(settings_source=solver)
+  >>> methods = pyfluent.solver.Methods(settings_source=solver)
   >>> flow_scheme = methods.p_v_coupling.flow_scheme
   >>> flow_scheme.allowed_values()
   ['SIMPLE', 'SIMPLEC', 'PISO', 'Coupled']
@@ -55,7 +55,7 @@ Solution controls
 
 .. code:: python
 
-  >>> controls = pyfluent.Controls(settings_source=solver)
+  >>> controls = pyfluent.solver.Controls(settings_source=solver)
   >>> p_v_controls = controls.p_v_controls
   >>> explicit_momentum_under_relaxation = p_v_controls.explicit_momentum_under_relaxation
   >>> explicit_momentum_under_relaxation.min()
@@ -75,7 +75,7 @@ Create a report definition
 
 .. code:: python
 
-  >>> rep_defs = pyfluent.ReportDefinitions(settings_source=solver)
+  >>> rep_defs = pyfluent.solver.ReportDefinitions(settings_source=solver)
   >>> surface_report_definitions = rep_defs.surface
   >>> defn_name = "outlet-temp-avg"
   >>> surface_report_definitions[defn_name] = {}

{ansys_fluent_core-0.29.dev1 → ansys_fluent_core-0.29.dev3}/pyproject.toml

@@ -5,7 +5,7 @@ build-backend = "flit_core.buildapi"
 [project]
 # Check https://flit.readthedocs.io/en/latest/pyproject_toml.html for all available sections
 name = "ansys-fluent-core"
-version = "0.29.dev1"
+version = "0.29.dev3"
 description = "PyFluent provides Pythonic access to Ansys Fluent."
 readme = "README.rst"
 requires-python = ">=3.10,<3.14"
@@ -21,7 +21,7 @@ classifiers = [
 ]
 dependencies = [
     "ansys-api-fluent>=0.3.33",
-    "ansys-platform-instancemanagement~=1.0",
+    "ansys-platform-instancemanagement~=1.1",
     "ansys-tools-filetransfer>=0.1,<0.3",
     "ansys-units>=0.3.3,<0.5",
     "docker>=7.1.0",

{ansys_fluent_core-0.29.dev1 → ansys_fluent_core-0.29.dev3}/src/ansys/fluent/core/__init__.py

@@ -41,7 +41,7 @@ from ansys.fluent.core.warnings import (  # noqa: F401
     warning,
 )
 
-_VERSION_INFO = "Build date: January 20, 2025 10:29 UTC ShaID: 83c68c1"
+_VERSION_INFO = "Build date: January 21, 2025 13:40 UTC ShaID: b9aa6e9"
 """Global variable indicating the version of the PyFluent package - Empty by default"""
 
 _THIS_DIRNAME = os.path.dirname(__file__)

{ansys_fluent_core-0.29.dev1 → ansys_fluent_core-0.29.dev3}/src/ansys/fluent/core/_version.py

@@ -6,7 +6,7 @@ version_info = 0, 1, 'dev0'
 """
 
 # major, minor, patch
-version_info = 0, 29, "dev1"
+version_info = 0, 29, "dev3"
 
 # Nice string for the version
 __version__ = ".".join(map(str, version_info))