airbyte-source-adjust 0.1.0__tar.gz

airbyte-source-adjust-0.1.0/PKG-INFO

@@ -0,0 +1,90 @@
+Metadata-Version: 2.1
+Name: airbyte-source-adjust
+Version: 0.1.0
+Summary: Source implementation for Adjust.
+Author: Airbyte
+Author-email: contact@airbyte.io
+Description-Content-Type: text/markdown
+Requires-Dist: airbyte-cdk~=0.1
+Provides-Extra: tests
+Requires-Dist: requests-mock~=1.9.3; extra == "tests"
+Requires-Dist: pytest~=6.1; extra == "tests"
+Requires-Dist: pytest-mock~=3.6.1; extra == "tests"
+
+# Adjust Source
+
+This is the repository for the Adjust source connector, written in Python.
+For information about how to use this connector within Airbyte, see [the documentation](https://docs.airbyte.io/integrations/sources/adjust).
+
+
+**To iterate on this connector, make sure to complete this prerequisites section.**
+
+
+From this connector directory, create a virtual environment:
+```
+python -m venv .venv
+```
+
+This will generate a virtualenv for this module in `.venv/`. Make sure this venv is active in your
+development environment of choice. To activate it from the terminal, run:
+```
+source .venv/bin/activate
+pip install -r requirements.txt
+pip install '.[tests]'
+```
+If you are in an IDE, follow your IDE's instructions to activate the virtualenv.
+
+Note that while we are installing dependencies from `requirements.txt`, you should only edit `setup.py` for your dependencies. `requirements.txt` is
+used for editable installs (`pip install -e`) to pull in Python dependencies from the monorepo and will call `setup.py`.
+If this is mumbo jumbo to you, don't worry about it, just put your deps in `setup.py` but install using `pip install -r requirements.txt` and everything
+should work as you expect.
+
+**If you are a community contributor**, follow the instructions in the [documentation](https://docs.airbyte.io/integrations/sources/adjust)
+to generate the necessary credentials. Then create a file `secrets/config.json` conforming to the `source_adjust/spec.yaml` file.
+Note that any directory named `secrets` is gitignored across the entire Airbyte repo, so there is no danger of accidentally checking in sensitive information.
+See `integration_tests/sample_config.json` for a sample config file.
+
+**If you are an Airbyte core member**, copy the credentials in Lastpass under the secret name `source adjust test creds`
+and place them into `secrets/config.json`.
+
+```
+python main.py spec
+python main.py check --config secrets/config.json
+python main.py discover --config secrets/config.json
+python main.py read --config secrets/config.json --catalog integration_tests/configured_catalog.json
+```
+
+
+
+**Via [`airbyte-ci`](https://github.com/airbytehq/airbyte/blob/master/airbyte-ci/connectors/pipelines/README.md) (recommended):**
+```bash
+airbyte-ci connectors --name source-adjust build
+```
+
+An image will be built with the tag `airbyte/source-adjust:dev`.
+
+**Via `docker build`:**
+```bash
+docker build -t airbyte/source-adjust:dev .
+```
+
+Then run any of the connector commands as follows:
+```
+docker run --rm airbyte/source-adjust:dev spec
+docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-adjust:dev check --config /secrets/config.json
+docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-adjust:dev discover --config /secrets/config.json
+docker run --rm -v $(pwd)/secrets:/secrets -v $(pwd)/integration_tests:/integration_tests airbyte/source-adjust:dev read --config /secrets/config.json --catalog /integration_tests/configured_catalog.json
+```
+
+You can run our full test suite locally using [`airbyte-ci`](https://github.com/airbytehq/airbyte/blob/master/airbyte-ci/connectors/pipelines/README.md):
+```bash
+airbyte-ci connectors --name=source-adjust test
+```
+
+Customize `acceptance-test-config.yml` file to configure tests. See [Connector Acceptance Tests](https://docs.airbyte.com/connector-development/testing-connectors/connector-acceptance-tests-reference) for more information.
+If your connector requires to create or destroy resources for use during acceptance tests create fixtures for it and place them inside integration_tests/acceptance.py.
+
+All of your dependencies should go in `setup.py`, NOT `requirements.txt`. The requirements file is only used to connect internal Airbyte dependencies in the monorepo for local development.
+We split dependencies between two groups, dependencies that are:
+* required for your connector to work need to go to `MAIN_REQUIREMENTS` list.
+* required for the testing need to go to `TEST_REQUIREMENTS` list

airbyte-source-adjust-0.1.0/README.md

@@ -0,0 +1,89 @@
+# Adjust Source
+
+This is the repository for the Adjust source connector, written in Python.
+For information about how to use this connector within Airbyte, see [the documentation](https://docs.airbyte.io/integrations/sources/adjust).
+
+## Local development
+
+### Prerequisites
+**To iterate on this connector, make sure to complete this prerequisites section.**
+
+#### Minimum Python version required `= 3.9.0`
+
+#### Build & Activate Virtual Environment and install dependencies
+From this connector directory, create a virtual environment:
+```
+python -m venv .venv
+```
+
+This will generate a virtualenv for this module in `.venv/`. Make sure this venv is active in your
+development environment of choice. To activate it from the terminal, run:
+```
+source .venv/bin/activate
+pip install -r requirements.txt
+pip install '.[tests]'
+```
+If you are in an IDE, follow your IDE's instructions to activate the virtualenv.
+
+Note that while we are installing dependencies from `requirements.txt`, you should only edit `setup.py` for your dependencies. `requirements.txt` is
+used for editable installs (`pip install -e`) to pull in Python dependencies from the monorepo and will call `setup.py`.
+If this is mumbo jumbo to you, don't worry about it, just put your deps in `setup.py` but install using `pip install -r requirements.txt` and everything
+should work as you expect.
+
+#### Create credentials
+**If you are a community contributor**, follow the instructions in the [documentation](https://docs.airbyte.io/integrations/sources/adjust)
+to generate the necessary credentials. Then create a file `secrets/config.json` conforming to the `source_adjust/spec.yaml` file.
+Note that any directory named `secrets` is gitignored across the entire Airbyte repo, so there is no danger of accidentally checking in sensitive information.
+See `integration_tests/sample_config.json` for a sample config file.
+
+**If you are an Airbyte core member**, copy the credentials in Lastpass under the secret name `source adjust test creds`
+and place them into `secrets/config.json`.
+
+### Locally running the connector
+```
+python main.py spec
+python main.py check --config secrets/config.json
+python main.py discover --config secrets/config.json
+python main.py read --config secrets/config.json --catalog integration_tests/configured_catalog.json
+```
+
+### Locally running the connector docker image
+
+
+#### Build
+**Via [`airbyte-ci`](https://github.com/airbytehq/airbyte/blob/master/airbyte-ci/connectors/pipelines/README.md) (recommended):**
+```bash
+airbyte-ci connectors --name source-adjust build
+```
+
+An image will be built with the tag `airbyte/source-adjust:dev`.
+
+**Via `docker build`:**
+```bash
+docker build -t airbyte/source-adjust:dev .
+```
+
+#### Run
+Then run any of the connector commands as follows:
+```
+docker run --rm airbyte/source-adjust:dev spec
+docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-adjust:dev check --config /secrets/config.json
+docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-adjust:dev discover --config /secrets/config.json
+docker run --rm -v $(pwd)/secrets:/secrets -v $(pwd)/integration_tests:/integration_tests airbyte/source-adjust:dev read --config /secrets/config.json --catalog /integration_tests/configured_catalog.json
+```
+
+## Testing
+You can run our full test suite locally using [`airbyte-ci`](https://github.com/airbytehq/airbyte/blob/master/airbyte-ci/connectors/pipelines/README.md):
+```bash
+airbyte-ci connectors --name=source-adjust test
+```
+
+### Customizing acceptance Tests
+Customize `acceptance-test-config.yml` file to configure tests. See [Connector Acceptance Tests](https://docs.airbyte.com/connector-development/testing-connectors/connector-acceptance-tests-reference) for more information.
+If your connector requires to create or destroy resources for use during acceptance tests create fixtures for it and place them inside integration_tests/acceptance.py.
+
+## Dependency Management
+All of your dependencies should go in `setup.py`, NOT `requirements.txt`. The requirements file is only used to connect internal Airbyte dependencies in the monorepo for local development.
+We split dependencies between two groups, dependencies that are:
+* required for your connector to work need to go to `MAIN_REQUIREMENTS` list.
+* required for the testing need to go to `TEST_REQUIREMENTS` list

airbyte-source-adjust-0.1.0/airbyte_source_adjust.egg-info/PKG-INFO

@@ -0,0 +1,90 @@
+Metadata-Version: 2.1
+Name: airbyte-source-adjust
+Version: 0.1.0
+Summary: Source implementation for Adjust.
+Author: Airbyte
+Author-email: contact@airbyte.io
+Description-Content-Type: text/markdown
+Requires-Dist: airbyte-cdk~=0.1
+Provides-Extra: tests
+Requires-Dist: requests-mock~=1.9.3; extra == "tests"
+Requires-Dist: pytest~=6.1; extra == "tests"
+Requires-Dist: pytest-mock~=3.6.1; extra == "tests"
+
+# Adjust Source
+
+This is the repository for the Adjust source connector, written in Python.
+For information about how to use this connector within Airbyte, see [the documentation](https://docs.airbyte.io/integrations/sources/adjust).
+
+
+**To iterate on this connector, make sure to complete this prerequisites section.**
+
+
+From this connector directory, create a virtual environment:
+```
+python -m venv .venv
+```
+
+This will generate a virtualenv for this module in `.venv/`. Make sure this venv is active in your
+development environment of choice. To activate it from the terminal, run:
+```
+source .venv/bin/activate
+pip install -r requirements.txt
+pip install '.[tests]'
+```
+If you are in an IDE, follow your IDE's instructions to activate the virtualenv.
+
+Note that while we are installing dependencies from `requirements.txt`, you should only edit `setup.py` for your dependencies. `requirements.txt` is
+used for editable installs (`pip install -e`) to pull in Python dependencies from the monorepo and will call `setup.py`.
+If this is mumbo jumbo to you, don't worry about it, just put your deps in `setup.py` but install using `pip install -r requirements.txt` and everything
+should work as you expect.
+
+**If you are a community contributor**, follow the instructions in the [documentation](https://docs.airbyte.io/integrations/sources/adjust)
+to generate the necessary credentials. Then create a file `secrets/config.json` conforming to the `source_adjust/spec.yaml` file.
+Note that any directory named `secrets` is gitignored across the entire Airbyte repo, so there is no danger of accidentally checking in sensitive information.
+See `integration_tests/sample_config.json` for a sample config file.
+
+**If you are an Airbyte core member**, copy the credentials in Lastpass under the secret name `source adjust test creds`
+and place them into `secrets/config.json`.
+
+```
+python main.py spec
+python main.py check --config secrets/config.json
+python main.py discover --config secrets/config.json
+python main.py read --config secrets/config.json --catalog integration_tests/configured_catalog.json
+```
+
+
+
+**Via [`airbyte-ci`](https://github.com/airbytehq/airbyte/blob/master/airbyte-ci/connectors/pipelines/README.md) (recommended):**
+```bash
+airbyte-ci connectors --name source-adjust build
+```
+
+An image will be built with the tag `airbyte/source-adjust:dev`.
+
+**Via `docker build`:**
+```bash
+docker build -t airbyte/source-adjust:dev .
+```
+
+Then run any of the connector commands as follows:
+```
+docker run --rm airbyte/source-adjust:dev spec
+docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-adjust:dev check --config /secrets/config.json
+docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-adjust:dev discover --config /secrets/config.json
+docker run --rm -v $(pwd)/secrets:/secrets -v $(pwd)/integration_tests:/integration_tests airbyte/source-adjust:dev read --config /secrets/config.json --catalog /integration_tests/configured_catalog.json
+```
+
+You can run our full test suite locally using [`airbyte-ci`](https://github.com/airbytehq/airbyte/blob/master/airbyte-ci/connectors/pipelines/README.md):
+```bash
+airbyte-ci connectors --name=source-adjust test
+```
+
+Customize `acceptance-test-config.yml` file to configure tests. See [Connector Acceptance Tests](https://docs.airbyte.com/connector-development/testing-connectors/connector-acceptance-tests-reference) for more information.
+If your connector requires to create or destroy resources for use during acceptance tests create fixtures for it and place them inside integration_tests/acceptance.py.
+
+All of your dependencies should go in `setup.py`, NOT `requirements.txt`. The requirements file is only used to connect internal Airbyte dependencies in the monorepo for local development.
+We split dependencies between two groups, dependencies that are:
+* required for your connector to work need to go to `MAIN_REQUIREMENTS` list.
+* required for the testing need to go to `TEST_REQUIREMENTS` list

airbyte-source-adjust-0.1.0/airbyte_source_adjust.egg-info/SOURCES.txt

@@ -0,0 +1,26 @@
+README.md
+setup.cfg
+setup.py
+airbyte_source_adjust.egg-info/PKG-INFO
+airbyte_source_adjust.egg-info/SOURCES.txt
+airbyte_source_adjust.egg-info/dependency_links.txt
+airbyte_source_adjust.egg-info/entry_points.txt
+airbyte_source_adjust.egg-info/requires.txt
+airbyte_source_adjust.egg-info/top_level.txt
+integration_tests/__init__.py
+integration_tests/abnormal_state.json
+integration_tests/acceptance.py
+integration_tests/catalog.json
+integration_tests/configured_catalog.json
+integration_tests/invalid_config.json
+integration_tests/sample_config.json
+integration_tests/sample_state.json
+source_adjust/__init__.py
+source_adjust/model.py
+source_adjust/run.py
+source_adjust/source.py
+source_adjust/spec.yaml
+unit_tests/__init__.py
+unit_tests/test_incremental_streams.py
+unit_tests/test_source.py
+unit_tests/test_streams.py

airbyte-source-adjust-0.1.0/airbyte_source_adjust.egg-info/dependency_links.txt

@@ -0,0 +1 @@
+

airbyte-source-adjust-0.1.0/airbyte_source_adjust.egg-info/entry_points.txt

@@ -0,0 +1,2 @@
+[console_scripts]
+source-adjust = source_adjust.run:run

airbyte-source-adjust-0.1.0/airbyte_source_adjust.egg-info/requires.txt

@@ -0,0 +1,6 @@
+airbyte-cdk~=0.1
+
+[tests]
+requests-mock~=1.9.3
+pytest~=6.1
+pytest-mock~=3.6.1

airbyte-source-adjust-0.1.0/airbyte_source_adjust.egg-info/top_level.txt

@@ -0,0 +1,3 @@
+integration_tests
+source_adjust
+unit_tests

airbyte-source-adjust-0.1.0/integration_tests/__init__.py

@@ -0,0 +1,3 @@
+#
+# Copyright (c) 2023 Airbyte, Inc., all rights reserved.
+#

airbyte-source-adjust-0.1.0/integration_tests/abnormal_state.json

@@ -0,0 +1,5 @@
+{
+  "adjust_report_stream": {
+    "day": "2050-01-01"
+  }
+}

airbyte-source-adjust-0.1.0/integration_tests/acceptance.py

@@ -0,0 +1,14 @@
+#
+# Copyright (c) 2023 Airbyte, Inc., all rights reserved.
+#
+
+
+import pytest
+
+pytest_plugins = ("connector_acceptance_test.plugin",)
+
+
+@pytest.fixture(scope="session", autouse=True)
+def connector_setup():
+    """This fixture is a placeholder for external resources that acceptance test might require."""
+    yield

airbyte-source-adjust-0.1.0/integration_tests/catalog.json

@@ -0,0 +1,43 @@
+{
+  "streams": [
+    {
+      "name": "adjust_report_stream",
+      "supported_sync_modes": ["full_refresh", "incremental"],
+      "source_defined_cursor": true,
+      "default_cursor_field": "day",
+      "json_schema": {
+        "$schema": "http://json-schema.org/draft-07/schema#",
+        "type": "object",
+        "properties": {
+          "clicks": {
+            "title": "Clicks",
+            "description": "Clicks.",
+            "type": "integer"
+          },
+          "installs": {
+            "title": "Installs",
+            "description": "Installs.",
+            "type": "integer"
+          },
+          "day": {
+            "title": "Day",
+            "description": "Date.",
+            "type": "string",
+            "format": "date"
+          },
+          "app": {
+            "title": "App",
+            "description": "Name of the app.",
+            "type": "string"
+          },
+          "network": {
+            "title": "Network",
+            "description": "The name of the advertising network.",
+            "type": "string"
+          }
+        },
+        "required": ["day"]
+      }
+    }
+  ]
+}

airbyte-source-adjust-0.1.0/integration_tests/configured_catalog.json

@@ -0,0 +1,46 @@
+{
+  "streams": [
+    {
+      "sync_mode": "incremental",
+      "destination_sync_mode": "append",
+      "stream": {
+        "name": "adjust_report_stream",
+        "json_schema": {
+          "title": "Report",
+          "type": "object",
+          "properties": {
+            "clicks": {
+              "title": "Clicks",
+              "description": "Clicks",
+              "type": "integer"
+            },
+            "installs": {
+              "title": "Installs",
+              "description": "Installs",
+              "type": "integer"
+            },
+            "day": {
+              "title": "Day",
+              "description": "Date.",
+              "type": "string",
+              "format": "date"
+            },
+            "app": {
+              "title": "App",
+              "description": "Name of the app.",
+              "type": "string"
+            },
+            "network": {
+              "title": "Network",
+              "description": "The name of the advertising network.",
+              "type": "string"
+            }
+          },
+          "required": ["day"],
+          "$schema": "http://json-schema.org/draft-07/schema#"
+        },
+        "supported_sync_modes": ["full_refresh", "incremental"]
+      }
+    }
+  ]
+}

airbyte-source-adjust-0.1.0/integration_tests/invalid_config.json

@@ -0,0 +1,7 @@
+{
+  "api_token": "invalid_token",
+  "ingest_start": "2022-07-07",
+  "metrics": ["installs", "clicks"],
+  "dimensions": ["app", "network"],
+  "additional_metrics": []
+}

airbyte-source-adjust-0.1.0/integration_tests/sample_config.json

@@ -0,0 +1,8 @@
+{
+  "ingest_start": "2022-07-07",
+  "api_token": "token",
+  "metrics": ["installs", "clicks"],
+  "dimensions": ["app", "network"],
+  "additional_metrics": [],
+  "until_today": true
+}

airbyte-source-adjust-0.1.0/integration_tests/sample_state.json

@@ -0,0 +1,5 @@
+{
+  "adjust_report_stream": {
+    "day": "2022-07-07"
+  }
+}

airbyte-source-adjust-0.1.0/setup.cfg

@@ -0,0 +1,88 @@
+[metadata]
+name = airbyte-source-adjust
+version = 0.1.0
+author = Airbyte
+author_email = contact@airbyte.io
+long_description = # Adjust Source
+	
+	This is the repository for the Adjust source connector, written in Python.
+	For information about how to use this connector within Airbyte, see [the documentation](https://docs.airbyte.io/integrations/sources/adjust).
+	
+	
+	**To iterate on this connector, make sure to complete this prerequisites section.**
+	
+	
+	From this connector directory, create a virtual environment:
+	```
+	python -m venv .venv
+	```
+	
+	This will generate a virtualenv for this module in `.venv/`. Make sure this venv is active in your
+	development environment of choice. To activate it from the terminal, run:
+	```
+	source .venv/bin/activate
+	pip install -r requirements.txt
+	pip install '.[tests]'
+	```
+	If you are in an IDE, follow your IDE's instructions to activate the virtualenv.
+	
+	Note that while we are installing dependencies from `requirements.txt`, you should only edit `setup.py` for your dependencies. `requirements.txt` is
+	used for editable installs (`pip install -e`) to pull in Python dependencies from the monorepo and will call `setup.py`.
+	If this is mumbo jumbo to you, don't worry about it, just put your deps in `setup.py` but install using `pip install -r requirements.txt` and everything
+	should work as you expect.
+	
+	**If you are a community contributor**, follow the instructions in the [documentation](https://docs.airbyte.io/integrations/sources/adjust)
+	to generate the necessary credentials. Then create a file `secrets/config.json` conforming to the `source_adjust/spec.yaml` file.
+	Note that any directory named `secrets` is gitignored across the entire Airbyte repo, so there is no danger of accidentally checking in sensitive information.
+	See `integration_tests/sample_config.json` for a sample config file.
+	
+	**If you are an Airbyte core member**, copy the credentials in Lastpass under the secret name `source adjust test creds`
+	and place them into `secrets/config.json`.
+	
+	```
+	python main.py spec
+	python main.py check --config secrets/config.json
+	python main.py discover --config secrets/config.json
+	python main.py read --config secrets/config.json --catalog integration_tests/configured_catalog.json
+	```
+	
+	
+	
+	**Via [`airbyte-ci`](https://github.com/airbytehq/airbyte/blob/master/airbyte-ci/connectors/pipelines/README.md) (recommended):**
+	```bash
+	airbyte-ci connectors --name source-adjust build
+	```
+	
+	An image will be built with the tag `airbyte/source-adjust:dev`.
+	
+	**Via `docker build`:**
+	```bash
+	docker build -t airbyte/source-adjust:dev .
+	```
+	
+	Then run any of the connector commands as follows:
+	```
+	docker run --rm airbyte/source-adjust:dev spec
+	docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-adjust:dev check --config /secrets/config.json
+	docker run --rm -v $(pwd)/secrets:/secrets airbyte/source-adjust:dev discover --config /secrets/config.json
+	docker run --rm -v $(pwd)/secrets:/secrets -v $(pwd)/integration_tests:/integration_tests airbyte/source-adjust:dev read --config /secrets/config.json --catalog /integration_tests/configured_catalog.json
+	```
+	
+	You can run our full test suite locally using [`airbyte-ci`](https://github.com/airbytehq/airbyte/blob/master/airbyte-ci/connectors/pipelines/README.md):
+	```bash
+	airbyte-ci connectors --name=source-adjust test
+	```
+	
+	Customize `acceptance-test-config.yml` file to configure tests. See [Connector Acceptance Tests](https://docs.airbyte.com/connector-development/testing-connectors/connector-acceptance-tests-reference) for more information.
+	If your connector requires to create or destroy resources for use during acceptance tests create fixtures for it and place them inside integration_tests/acceptance.py.
+	
+	All of your dependencies should go in `setup.py`, NOT `requirements.txt`. The requirements file is only used to connect internal Airbyte dependencies in the monorepo for local development.
+	We split dependencies between two groups, dependencies that are:
+	* required for your connector to work need to go to `MAIN_REQUIREMENTS` list.
+	* required for the testing need to go to `TEST_REQUIREMENTS` list
+long_description_content_type = text/markdown
+
+[egg_info]
+tag_build = 
+tag_date = 0
+

airbyte-source-adjust-0.1.0/setup.py

@@ -0,0 +1,43 @@
+#
+# Copyright (c) 2023 Airbyte, Inc., all rights reserved.
+#
+
+
+from setuptools import find_packages, setup
+
+MAIN_REQUIREMENTS = [
+    "airbyte-cdk~=0.1",
+]
+
+TEST_REQUIREMENTS = [
+    "requests-mock~=1.9.3",
+    "pytest~=6.1",
+    "pytest-mock~=3.6.1",
+]
+
+setup(
+    entry_points={
+        "console_scripts": [
+            "source-adjust=source_adjust.run:run",
+        ],
+    },
+    description="Source implementation for Adjust.",
+    packages=find_packages(),
+    install_requires=MAIN_REQUIREMENTS,
+    package_data={
+        "": [
+            # Include yaml files in the package (if any)
+            "*.yml",
+            "*.yaml",
+            # Include all json files in the package, up to 4 levels deep
+            "*.json",
+            "*/*.json",
+            "*/*/*.json",
+            "*/*/*/*.json",
+            "*/*/*/*/*.json",
+        ]
+    },
+    extras_require={
+        "tests": TEST_REQUIREMENTS,
+    },
+)

airbyte-source-adjust-0.1.0/source_adjust/__init__.py

@@ -0,0 +1,8 @@
+#
+# Copyright (c) 2023 Airbyte, Inc., all rights reserved.
+#
+
+
+from .source import SourceAdjust
+
+__all__ = ["SourceAdjust"]