@nordicsemiconductor/pc-nrfconnect-shared 223.0.0 → 224.0.0

package/Changelog.md

@@ -7,6 +7,16 @@ This project does _not_ adhere to
 [Semantic Versioning](https://semver.org/spec/v2.0.0.html) but contrary to it
 every new version is a new major version.
 
+## 224.0.0 - 2025-08-27
+
+### Fixed
+
+-   Apps did not reload after restoring the default settings.
+
+### Removed
+
+-   Removed the `isSkipUpdate*` properties from the launcher config.
+
 ## 223.0.0 - 2025-07-28
 
 ### Changed
@@ -109,7 +119,7 @@ every new version is a new major version.
 
 ### Added
 
--   Specify what core version of nrfutil an app depends on.
+-   Specify what core version of nRF Util an app depends on.
 
 ### Removed
 
@@ -122,7 +132,7 @@ every new version is a new major version.
 ### Steps to upgrade when using this package
 
 -   In apps in `package.json` set the field `nrfConnectForDesktop.nrfutilCore`
-    to the core version of nrfutil that the nrfutil commands will use.
+    to the core version of nRF Util that the nRF Util commands will use.
 -   Replace usage of `prepareSandbox` with `NrfutilSandbox.create`
 -   Update calls of `xRead`.
 
@@ -141,18 +151,18 @@ every new version is a new major version.
 -   Scrollbars no longer appear in the device list for a second when
     disconnecting a device.
 -   `Dropdown` active label now handles overflow.
--   nRFUtil device batch will not run if no subcommand has been added to the
+-   nRF Util device batch will not run if no subcommand has been added to the
     batch.
 
 ### Steps to upgrade when using this package
 
--   Minimum version of nrfutil-device is 2.7.16.
+-   Minimum version of `nrfutil device` is 2.7.16.
 
 ## 209.0.0 - 2025-04-30
 
 ### Changed
 
--   Nrfutil device use of `fw-read` is replaced with `x-read`.
+-   `nrfutil device` use of `fw-read` is replaced with `x-read`.
 
 ### Steps to upgrade when using this package
 
@@ -209,11 +219,11 @@ every new version is a new major version.
 
 ### Added
 
--   `nrf-probe` verison check for nrfutil device.
+-   `nrf-probe` verison check for `nrfutil device`.
 
 ### Removed
 
--   `nrfjprog` verison check for nrfutil device.
+-   `nrfjprog` verison check for `nrfutil device`.
 
 ### Changed
 
@@ -306,7 +316,7 @@ Overrides v202 as it was released a prerelease.
 
 ### Fixed
 
--   nrfutil: mcu-state-set caused an error if no target was specified.
+-   nRF Util: mcu-state-set caused an error if no target was specified.
 
 ## 193.0.0 - 2024-12-04
 
@@ -329,9 +339,9 @@ Overrides v202 as it was released a prerelease.
 
 ### Changed
 
--   nrfutil: The core gets upgraded before installing a command.
--   nrfutil: The `version` properties of dependencies are now optional,
-    reflecting the behaviour since `nrfutil-device` v2.7.0.
+-   nRF Util: The core gets upgraded before installing a command.
+-   nRF Util: The `version` properties of dependencies are now optional,
+    reflecting the behaviour since `nrfutil device` v2.7.0.
 -   Warning for J-Link versions: Only inform (not warn) if the installed version
     is newer than the tested version. Updated the text for all cases.
 
@@ -351,11 +361,11 @@ Overrides v202 as it was released a prerelease.
 
 -   Dropdown helper functions which are used in `pc-nrfconnect-serial-terminal`
     and `pc-nrfconnect-programmer`.
--   Add nrfutil mcu-state-options for multi target support.
+-   Add nRF Util `mcu-state-options` for multi target support.
 
 ### Steps to upgrade when using this package
 
--   Minimum support version of nrfutil device is now 2.5.0
+-   Minimum support version of `nrfutil device` is now 2.5.0.
 
 ## 188.0.0 - 2024-10-15
 
@@ -397,7 +407,7 @@ Overrides v202 as it was released a prerelease.
 
 ### Fixed
 
--   Stop nrfutil sandbox from starting to run an aborted command.
+-   Stop nRF Util sandbox from starting to run an aborted command.
 -   Device setup event call order when autoreconnecting at the same time as
     selecting.
 
@@ -438,13 +448,13 @@ Overrides v202 as it was released a prerelease.
 
 ### Changed
 
--   nrfutil sandbox deletes any residual sandbox folder before install.
+-   nRF Util sandbox deletes any residual sandbox folder before install.
 
 ## 180.0.0 - 2024-07-01
 
 ### Changed
 
--   nrfutil sandbox folder is deleted if installation fails.
+-   nRF Util sandbox folder is deleted if installation fails.
 
 ## 179.0.0 - 2024-06-20
 
@@ -478,7 +488,7 @@ Overrides v202 as it was released a prerelease.
 
 ### Fixed
 
--   NRFUtil Sandbox s installed on Apple Silicon now uses the arm64 folder and
+-   nRF Util Sandbox s installed on Apple Silicon now uses the arm64 folder and
     not the intel one.
 
 ## 175.0.0 - 2024-05-02
@@ -514,7 +524,7 @@ Overrides v202 as it was released a prerelease.
 
 ### Added
 
--   Support for splitting M1 and x64 nrfutil sandboxes.
+-   Support for splitting M1 and x64 nRF Util sandboxes.
 
 ## 172.0.0 - 2024-04-15
 
@@ -602,7 +612,7 @@ Overrides v202 as it was released a prerelease.
 
 ### Added
 
--   Auto update nrfutil core for sandboxes
+-   Auto update nRF Util core for sandboxes
 
 ## 164.0.0 - 2024-03-05
 
@@ -693,11 +703,11 @@ Overrides v202 as it was released a prerelease.
 ### Changed
 
 -   `getReadbackProtection` now returns protection type `ProtectionStatus` from
-    nrfutil device common.ts
+    `nrfutil device` common.ts
 
 ### Steps to upgrade when using this package
 
--   Minimum support version of nrfutil device is now 2.1.1
+-   Minimum support version of `nrfutil device` is now 2.1.1.
 
 ## 157.0.0 - 2024-02-06
 
@@ -778,9 +788,9 @@ Overrides v202 as it was released a prerelease.
 ### Fixed
 
 -   `Overlay` tooltips weren't centered due to incorrect sizing styles.
--   When spawning the nrfutil process fails in certain ways, an uncaught
+-   When spawning the nRF Util process fails in certain ways, an uncaught
     exception in the main process got thrown. The “certain ways” make this a bit
-    hard to reproduce: On macOS this happened, when the nrfutil executable did
+    hard to reproduce: On macOS this happened, when the nRF Util executable did
     not have the executable file mode. Usually this should not happen, because
     we set that mode ourselves correctly.
 
@@ -804,10 +814,10 @@ Overrides v202 as it was released a prerelease.
 ### Added
 
 -   `getModule` export from `@nordicsemiconductor/pc-nrfconnect-shared/nrfutil`
-    to retrieve/initialise specific nrfutil module sandbox.
+    to retrieve/initialise specific nRF Util module sandbox.
 -   `setVerboseLogging`, `setLogLevel` and `getAllModuleVersions` exports from
     `@nordicsemiconductor/pc-nrfconnect-shared/nrfutil` to target all
-    initialised nrfutil modules.
+    initialised nRF Util modules.
 
 ### Changed
 
@@ -816,14 +826,14 @@ Overrides v202 as it was released a prerelease.
     (previously this was only used to determine whether an app should have
     verbose logging enabled on startup). This allows code which does/should not
     have access to the redux store to still retrieve the verbose logging state.
--   `Create system report` now logs the version of all initialised nrfutil
+-   `Create system report` now logs the version of all initialised nRF Util
     modules.
--   nrfutil device exports have now been moved to
+-   `nrfutil device` exports have now been moved to
     `@nordicsemiconductor/pc-nrfconnect-shared/nrfutil/device`.
 
 ### Steps to upgrade
 
--   Replace all calls of nrfutil device imported from
+-   Replace all calls of `nrfutil device` imported from
     `@nordicsemiconductor/pc-nrfconnect-shared/nrfutil` to
     `@nordicsemiconductor/pc-nrfconnect-shared/nrfutil/device`.
 
@@ -903,7 +913,7 @@ Overrides v202 as it was released a prerelease.
 ### Added
 
 -   Added command wrappers to interact with the Board Controller using
-    `nrfutil-device`. `boardController()` to write board controller config to
+    `nrfutil device`. `boardController()` to write board controller config to
     the DK. `getBoardControllerVersion()` to get the version information from
     the Board Controller. (like firmware version and board hardware revision)
 
@@ -915,7 +925,7 @@ Overrides v202 as it was released a prerelease.
 
 ### Fixed
 
--   `nrfutil sandbox` `execCommand` did not escape executable path leading to
+-   nRF Util sandbox `execCommand` did not escape executable path leading to
     failure when path has whitespace
 
 ## 137.0.0 - 2023-12-04
@@ -939,7 +949,7 @@ Overrides v202 as it was released a prerelease.
     dependency of a useEffect
 -   `useStopWatch` start optional time param no longer default to the last time
     when paused but 0.
--   `nrfutil device` `device-info` return undefined if reading info throws
+-   `nrfutil device device-info` returns undefined if reading info throws
 
 ### Steps to upgrade when using this package
 
@@ -980,7 +990,7 @@ Overrides v202 as it was released a prerelease.
 
 ### Changed
 
--   Nrfutil `sandbox` default logging level to 'off' in production and 'error'
+-   nRF Util `sandbox` default logging level to 'off' in production and 'error'
     in development environments
 
 ## 132.0.0 - 2023-11-14
@@ -1012,7 +1022,7 @@ Overrides v202 as it was released a prerelease.
 ### Fixed
 
 -   Ensure that all enumerated devices are always processed in order to avoid:
-    -   calling nrfutil device-info multiple times for the same device
+    -   calling `nrfutil device-info` multiple times for the same device
     -   only calling onSuccess once when waiting for device when rebooting
 -   `nrfutil device` now calls `device-info` before notifying the app with an
     onSelectedDevice. This is to ensure the operations to the device are
@@ -1022,17 +1032,17 @@ Overrides v202 as it was released a prerelease.
 
 ### Added
 
--   `nrfutil` sandbox now allows caller to pass optional lambda to manipulate
-    the env values
--   `nrfutil` provides an alternative to spawn and just exec
+-   nRF Util sandbox now allows caller to pass optional lambda to manipulate the
+    env values
+-   nRF Util provides an alternative to spawn and just exec
 -   `nrfutil device` auto logs version information when it is initialed for the
     first time.
 
 ### Changed
 
--   `ErrorBoundary` only collect device lib info if these app adds nrfutil
-    device as a dependency in `package.json`
--   `App` no longer logs nrfutil device version.
+-   `ErrorBoundary` only collect device lib info if these app adds
+    `nrfutil device` as a dependency in `package.json`
+-   `App` no longer logs `nrfutil device` version.
 
 ## 128.0.0 - 2023-11-08
 
@@ -1206,7 +1216,7 @@ render(<App panes={[]} />);
 
 ### Fixed
 
--   `nrfutil` abort log messages is now more descriptive
+-   nRF Util's abort log messages is now more descriptive
 -   `nrfutil device batch` could previously call the `onException` when task was
     complete.
 
@@ -1278,7 +1288,7 @@ declare module '!!@svgr!*.svg' {
 
 ### Changed
 
--   Improve `Nrfutil Sandbox` error messages.
+-   Improve nRF Util sandbox error messages.
 
 ### Added
 
@@ -1307,7 +1317,7 @@ declare module '!!@svgr!*.svg' {
 
 ### Added
 
--   Log warning for any nrfutil device that was not enumerated
+-   Log warning for any device that was not enumerated with `nrfutil device`.
 
 ### Fixed
 
@@ -1317,8 +1327,8 @@ declare module '!!@svgr!*.svg' {
 
 ### Changed
 
--   `Nrfutil Device` batch now generate batch JSON using the CLI. Requires
-    nrfutil device 1.4.2
+-   `nrfutil device` batch now generate batch JSON using the CLI. Requires
+    `nrfutil device` 1.4.2
 
 ### Fixed
 
@@ -1361,25 +1371,25 @@ declare module '!!@svgr!*.svg' {
 
 ### Fixed
 
--   Unable to use nrfutil device in production due to issue with nrfutil device
-    logging when set to off.
+-   Unable to use `nrfutil device` in production due to issue with
+    `nrfutil device` logging when set to off.
 
 ## 99.0.0 - 2023-09-04
 
 ### Added
 
--   nrfutil device list now supports optional timeout parameter
+-   `nrfutil device list` now supports optional timeout parameter
 
 ### Changed
 
--   Nrfutil device list now default to 3000ms timeout when enumerating (was
+-   `nrfutil device list` now default to 3000ms timeout when enumerating (was
     1000ms)
--   Nrfutil device now support nrfutil device 1.4.x only
--   Nrfutil device will not log in production unless verbose logging is on
+-   `nrfutil device` now support `nrfutil device` 1.4.x only
+-   `nrfutil device` will not log in production unless verbose logging is on
 
 ### Fixed
 
--   Nrfutil device std error message string
+-   `nrfutil device` std error message string
 -   When SDFU MCU State change fails, wait for device is now canceled
 
 ### Removed
@@ -1454,19 +1464,19 @@ declare module '!!@svgr!*.svg' {
 
 ### Added
 
--   Nrfutil progress now has a new property `totalProgressPercentage` that
+-   nRF Util progress now has a new property `totalProgressPercentage` that
     computes the progress across all steps
 
 ### Changed
 
--   Nrfutil progress properties `step` and `amountOfSteps` are now always
+-   nRF Util progress properties `step` and `amountOfSteps` are now always
     present
--   Nrfutil progress properties `progressPercentage` has been renamed to
+-   nRF Util progress properties `progressPercentage` has been renamed to
     `stepProgressPercentage`
 
 ### Steps to upgrade
 
--   Any usage of Nrfutil property `progressPercentage` need to be renamed to
+-   Any usage of nRF Util property `progressPercentage` need to be renamed to
     `stepProgressPercentage`
 
 ## 92.0.0 - 2023-08-24

package/ipc/launcherConfig.ts

@@ -8,8 +8,6 @@ import { ipcMain, ipcRenderer } from 'electron';
 
 export interface Configuration {
     isRunningLauncherFromSource: boolean;
-    isSkipUpdateApps: boolean;
-    isSkipUpdateLauncher: boolean;
     launcherVersion: string;
     userDataDir: string;
 }

package/nrfutil/device/logLibVersions.ts

@@ -35,29 +35,29 @@ export default (moduleVersion: ModuleVersion) => {
     try {
         const dependencies = moduleVersion.dependencies;
 
-        log('nrfutil-device', moduleVersion.version);
+        log('nrfutil device', moduleVersion.version);
         log('nrf-device-lib', findDependency('nrfdl', dependencies));
         log('nrf-probe', findDependency('nrf-probe', dependencies));
-        log('JLink', findDependency('JlinkARM', dependencies));
+        log('SEGGER J-Link', findDependency('JlinkARM', dependencies));
 
         const jlinkCompatibility = getJlinkCompatibility(moduleVersion);
 
         switch (jlinkCompatibility.kind) {
-            case 'No J-Link installed':
+            case 'No SEGGER J-Link installed':
                 logger?.warn(
                     `SEGGER J-Link is not installed. ` +
                         `Install at least version ${jlinkCompatibility.requiredJlink} ` +
                         `from https://www.segger.com/downloads/jlink`
                 );
                 break;
-            case 'Outdated J-Link':
+            case 'Outdated SEGGER J-Link':
                 logger?.warn(
                     `Outdated SEGGER J-Link. Your version of SEGGER J-Link (${jlinkCompatibility.actualJlink}) ` +
                         `is older than the one this app was tested with (${jlinkCompatibility.requiredJlink}). ` +
                         `Install the newer version from https://www.segger.com/downloads/jlink`
                 );
                 break;
-            case 'Newer J-Link is used':
+            case 'Newer SEGGER J-Link is used':
                 logger?.info(
                     `Your version of SEGGER J-Link (${jlinkCompatibility.actualJlink}) ` +
                         `is newer than the one this app was tested with (${jlinkCompatibility.requiredJlink}). ` +

package/nrfutil/sandbox.ts

@@ -190,7 +190,7 @@ export class NrfutilSandbox {
             this.coreVersion ?? CORE_VERSION_FOR_LEGACY_APPS;
         if (currentCoreVersion.version === requestedCoreVersion) {
             getNrfutilLogger()?.debug(
-                `Requested nrfutil core version ${requestedCoreVersion} is already installed.`
+                `Requested nRF Util's core version ${requestedCoreVersion} is already installed.`
             );
 
             return;

package/nrfutil/version/jlinkVersion.test.ts

@@ -206,7 +206,7 @@ describe('getJlinkCompatibility', () => {
         ...dependencies: Dependency[]
     ): ModuleVersion => ({
         classification: 'nrf-external',
-        name: 'nrfutil-device',
+        name: 'nrfutil device',
         version: '2.5.0',
         build_timestamp: '',
         commit_date: '',
@@ -227,15 +227,15 @@ describe('getJlinkCompatibility', () => {
         host: '',
     });
 
-    it(`Reports no installed J-Link for for module versions reported by nrfutil-device before v2.7`, () => {
+    it(`Reports no installed SEGGER J-Link for for module versions reported by nrfutil device before v2.7`, () => {
         expect(getJlinkCompatibility(createModuleVersion())).toEqual({
-            kind: 'No J-Link installed',
+            kind: 'No SEGGER J-Link installed',
             requiredJlink: '7.94e',
             actualJlink: 'none',
         });
     });
 
-    it(`Reports no installed J-Link for for module versions reported by nrfutil-device since v2.7`, () => {
+    it(`Reports no installed SEGGER J-Link for for module versions reported by nrfutil device since v2.7`, () => {
         expect(
             getJlinkCompatibility(
                 createModuleVersion({
@@ -247,13 +247,13 @@ describe('getJlinkCompatibility', () => {
                 })
             )
         ).toEqual({
-            kind: 'No J-Link installed',
+            kind: 'No SEGGER J-Link installed',
             requiredJlink: '8.10f',
             actualJlink: 'none',
         });
     });
 
-    it(`Reports an outdated J-Link version`, () => {
+    it(`Reports an outdated SEGGER J-Link version`, () => {
         expect(
             getJlinkCompatibility(
                 createModuleVersion({
@@ -267,13 +267,13 @@ describe('getJlinkCompatibility', () => {
                 })
             )
         ).toEqual({
-            kind: 'Outdated J-Link',
+            kind: 'Outdated SEGGER J-Link',
             requiredJlink: '7.94i',
             actualJlink: '7.94e',
         });
     });
 
-    it(`Reports a newer J-Link version is used`, () => {
+    it(`Reports a newer SEGGER J-Link version is used`, () => {
         expect(
             getJlinkCompatibility(
                 createModuleVersion({
@@ -287,13 +287,13 @@ describe('getJlinkCompatibility', () => {
                 })
             )
         ).toEqual({
-            kind: 'Newer J-Link is used',
+            kind: 'Newer SEGGER J-Link is used',
             requiredJlink: '7.94i',
             actualJlink: '8.10f',
         });
     });
 
-    it(`Reports the tested J-Link version is used`, () => {
+    it(`Reports the tested SEGGER J-Link version is used`, () => {
         expect(
             getJlinkCompatibility(
                 createModuleVersion({
@@ -306,10 +306,10 @@ describe('getJlinkCompatibility', () => {
                     },
                 })
             )
-        ).toEqual({ kind: 'Tested J-Link is used' });
+        ).toEqual({ kind: 'Tested SEGGER J-Link is used' });
     });
 
-    it(`Reports the tested J-Link version is used by specifying no expected version`, () => {
+    it(`Reports the tested SEGGER J-Link version is used by specifying no expected version`, () => {
         expect(
             getJlinkCompatibility(
                 createModuleVersion({
@@ -318,6 +318,6 @@ describe('getJlinkCompatibility', () => {
                     versionFormat: 'string',
                 })
             )
-        ).toEqual({ kind: 'Tested J-Link is used' });
+        ).toEqual({ kind: 'Tested SEGGER J-Link is used' });
     });
 });

package/nrfutil/version/jlinkVersion.ts

@@ -34,7 +34,7 @@ export const hasExpectedVersionFormat = (
 
     if (!result && logFailure) {
         console.error(
-            `The J-Link version was not reported in the expected format. ` +
+            `The SEGGER J-Link version was not reported in the expected format. ` +
                 `Format: ${dependency.versionFormat}, ` +
                 `version: ${JSON.stringify(dependency)}, `
         );
@@ -99,7 +99,7 @@ export const getJlinkCompatibility = (moduleVersion: ModuleVersion) => {
                 ? strippedVersionName(jlinkVersionDependency.expectedVersion)
                 : nrfutilDeviceToJLink(moduleVersion.version);
         return {
-            kind: 'No J-Link installed',
+            kind: 'No SEGGER J-Link installed',
             requiredJlink: requiredVersion,
             actualJlink: 'none',
         } as const;
@@ -115,7 +115,7 @@ export const getJlinkCompatibility = (moduleVersion: ModuleVersion) => {
         const actualJlink = strippedVersionName(jlinkVersionDependency);
 
         return {
-            kind: 'Outdated J-Link',
+            kind: 'Outdated SEGGER J-Link',
             requiredJlink,
             actualJlink,
         } as const;
@@ -127,7 +127,7 @@ export const getJlinkCompatibility = (moduleVersion: ModuleVersion) => {
             jlinkVersionDependency.expectedVersion.version
     ) {
         return {
-            kind: 'Tested J-Link is used',
+            kind: 'Tested SEGGER J-Link is used',
         } as const;
     }
 
@@ -137,7 +137,7 @@ export const getJlinkCompatibility = (moduleVersion: ModuleVersion) => {
     const actualJlink = strippedVersionName(jlinkVersionDependency);
 
     return {
-        kind: 'Newer J-Link is used',
+        kind: 'Newer SEGGER J-Link is used',
         requiredJlink,
         actualJlink,
     } as const;

package/package.json

@@ -1,13 +1,13 @@
 {
     "name": "@nordicsemiconductor/pc-nrfconnect-shared",
-    "version": "223.0.0",
+    "version": "224.0.0",
     "description": "Shared commodities for developing pc-nrfconnect-* packages",
     "repository": {
         "type": "git",
         "url": "git+https://github.com/NordicSemiconductor/pc-nrfconnect-shared.git"
     },
     "author": "Nordic Semiconductor ASA",
-    "license": "ISC",
+    "license": "SEE LICENSE IN LICENSE",
     "bin": {
         "check-for-typescript": "scripts/check-for-typescript.ts",
         "check-app-properties": "scripts/check-app-properties.ts",

package/release_notes.md

@@ -1,5 +1,7 @@
-### Changed
+### Fixed
 
--   Return value of `getDownloadableApps` has less fields now and some more
-    exports were removed, because they were only needed in the launcher and
-    having them in shared made changes harder in the launcher.
+-   Apps did not reload after restoring the default settings.
+
+### Removed
+
+-   Removed the `isSkipUpdate*` properties from the launcher config.

package/src/Device/deviceLister.ts

@@ -162,7 +162,7 @@ const removeDeviceFromList =
         }
     };
 /*
- * Starts watching for devices with the given traits. See the nrfutil-device
+ * Starts watching for devices with the given traits. See the nrfutil device
  * library for available traits. Whenever devices are attached/detached, this
  * will dispatch AddDevice or removeDevice and trigger events.
  */

package/src/FactoryReset/FactoryResetButton.tsx

@@ -5,6 +5,7 @@
  */
 
 import React, { FC, useRef, useState } from 'react';
+import { getCurrentWindow } from '@electron/remote';
 
 import Button, { ButtonVariants } from '../Button/Button';
 import { Dialog, DialogButton } from '../Dialog/Dialog';
@@ -21,7 +22,7 @@ interface Props {
 }
 
 const DEFAULT_MODAL_TEXT =
-    'By restoring defaults, all stored app-specific configuration values will be lost. This does not include configurations such as device renames and favorites. Are you sure you want to proceed?';
+    'By restoring the default settings, all locally stored, app-specific configuration values will be lost. This does not include configurations such as device renames and favorites. The app will be reloaded. Are you sure you want to proceed?';
 
 const FactoryResetButton: FC<Props> = ({
     resetFn,
@@ -36,6 +37,7 @@ const FactoryResetButton: FC<Props> = ({
     const defaultResetFn = () => {
         store().clear();
         logger.info('Successfully restored defaults');
+        getCurrentWindow().reload();
     };
 
     return (

package/src/utils/systemReport.ts

@@ -72,7 +72,7 @@ const generalInfoReport = async () => {
 
     moduleVersions.forEach(moduleVersion => {
         result.push(
-            `    - nrfutil-${moduleVersion.name}: ${moduleVersion.version}`
+            `    - nrfutil ${moduleVersion.name}: ${moduleVersion.version}`
         );
         if (moduleVersion.name === 'device') {
             const dependencies = moduleVersion.dependencies;

package/typings/generated/ipc/launcherConfig.d.ts

@@ -1,7 +1,5 @@
 export interface Configuration {
     isRunningLauncherFromSource: boolean;
-    isSkipUpdateApps: boolean;
-    isSkipUpdateLauncher: boolean;
     launcherVersion: string;
     userDataDir: string;
 }

package/typings/generated/ipc/launcherConfig.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"launcherConfig.d.ts","sourceRoot":"","sources":["../../../ipc/launcherConfig.ts"],"names":[],"mappings":"AAQA,MAAM,WAAW,aAAa;IAC1B,2BAA2B,EAAE,OAAO,CAAC;IACrC,gBAAgB,EAAE,OAAO,CAAC;IAC1B,oBAAoB,EAAE,OAAO,CAAC;IAC9B,eAAe,EAAE,MAAM,CAAC;IACxB,WAAW,EAAE,MAAM,CAAC;CACvB;AASD,eAAO,MAAM,WAAW;gCALW,aAAa;CAKA,CAAC;AACjD,eAAO,MAAM,MAAM;qBAPG,aAAa;CAOA,CAAC"}
+{"version":3,"file":"launcherConfig.d.ts","sourceRoot":"","sources":["../../../ipc/launcherConfig.ts"],"names":[],"mappings":"AAQA,MAAM,WAAW,aAAa;IAC1B,2BAA2B,EAAE,OAAO,CAAC;IACrC,eAAe,EAAE,MAAM,CAAC;IACxB,WAAW,EAAE,MAAM,CAAC;CACvB;AASD,eAAO,MAAM,WAAW;gCALW,aAAa;CAKA,CAAC;AACjD,eAAO,MAAM,MAAM;qBAPG,aAAa;CAOA,CAAC"}

package/typings/generated/nrfutil/version/jlinkVersion.d.ts

@@ -5,19 +5,19 @@ export declare const hasExpectedVersionFormat: (dependency: Dependency | Discrim
 export declare const convertToSemver: (version: DiscriminatedVersion) => string;
 export declare const existingIsOlderThanExpected: (jlinkVersionDependency: Dependency) => boolean;
 export declare const getJlinkCompatibility: (moduleVersion: ModuleVersion) => {
-    readonly kind: "No J-Link installed";
+    readonly kind: "No SEGGER J-Link installed";
     readonly requiredJlink: string;
     readonly actualJlink: "none";
 } | {
-    readonly kind: "Outdated J-Link";
+    readonly kind: "Outdated SEGGER J-Link";
     readonly requiredJlink: string;
     readonly actualJlink: string;
 } | {
-    readonly kind: "Tested J-Link is used";
+    readonly kind: "Tested SEGGER J-Link is used";
     readonly requiredJlink?: undefined;
     readonly actualJlink?: undefined;
 } | {
-    readonly kind: "Newer J-Link is used";
+    readonly kind: "Newer SEGGER J-Link is used";
     readonly requiredJlink: string;
     readonly actualJlink: string;
 };

package/typings/generated/src/FactoryReset/FactoryResetButton.d.ts.map

@@ -1 +1 @@
-{"version":3,"file":"FactoryResetButton.d.ts","sourceRoot":"","sources":["../../../../src/FactoryReset/FactoryResetButton.tsx"],"names":[],"mappings":"AAMA,OAAc,EAAE,EAAE,EAAoB,MAAM,OAAO,CAAC;AAEpD,OAAe,EAAE,cAAc,EAAE,MAAM,kBAAkB,CAAC;AAK1D,UAAU,KAAK;IACX,OAAO,CAAC,EAAE,MAAM,IAAI,CAAC;IACrB,KAAK,EAAE,MAAM,CAAC;IACd,SAAS,CAAC,EAAE,MAAM,CAAC;IACnB,OAAO,CAAC,EAAE,cAAc,CAAC;IACzB,UAAU,CAAC,EAAE,MAAM,CAAC;IACpB,KAAK,CAAC,EAAE,OAAO,CAAC;CACnB;AAKD,QAAA,MAAM,kBAAkB,EAAE,EAAE,CAAC,KAAK,CAqDjC,CAAC;AAEF,eAAe,kBAAkB,CAAC"}
+{"version":3,"file":"FactoryResetButton.d.ts","sourceRoot":"","sources":["../../../../src/FactoryReset/FactoryResetButton.tsx"],"names":[],"mappings":"AAMA,OAAc,EAAE,EAAE,EAAoB,MAAM,OAAO,CAAC;AAGpD,OAAe,EAAE,cAAc,EAAE,MAAM,kBAAkB,CAAC;AAK1D,UAAU,KAAK;IACX,OAAO,CAAC,EAAE,MAAM,IAAI,CAAC;IACrB,KAAK,EAAE,MAAM,CAAC;IACd,SAAS,CAAC,EAAE,MAAM,CAAC;IACnB,OAAO,CAAC,EAAE,cAAc,CAAC;IACzB,UAAU,CAAC,EAAE,MAAM,CAAC;IACpB,KAAK,CAAC,EAAE,OAAO,CAAC;CACnB;AAKD,QAAA,MAAM,kBAAkB,EAAE,EAAE,CAAC,KAAK,CAsDjC,CAAC;AAEF,eAAe,kBAAkB,CAAC"}