@aws-sdk/client-elastic-load-balancing-v2 3.36.0 → 3.39.0

package/dist-types/ts3.4/models/models_0.d.ts

@@ -4,68 +4,29 @@ export declare enum AuthenticateCognitoActionConditionalBehaviorEnum {
     AUTHENTICATE = "authenticate",
     DENY = "deny"
 }
-/**
- * <p>Request parameters to use when integrating with Amazon Cognito to authenticate
- *       users.</p>
- */
+
 export interface AuthenticateCognitoActionConfig {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the Amazon Cognito user pool.</p>
-     */
+    
     UserPoolArn: string | undefined;
-    /**
-     * <p>The ID of the Amazon Cognito user pool client.</p>
-     */
+    
     UserPoolClientId: string | undefined;
-    /**
-     * <p>The domain prefix or fully-qualified domain name of the Amazon Cognito user pool.</p>
-     */
+    
     UserPoolDomain: string | undefined;
-    /**
-     * <p>The name of the cookie used to maintain session information. The default is
-     *       AWSELBAuthSessionCookie.</p>
-     */
+    
     SessionCookieName?: string;
-    /**
-     * <p>The set of user claims to be requested from the IdP. The default is
-     *       <code>openid</code>.</p>
-     *          <p>To verify which scope values your IdP supports and how to separate multiple values, see
-     *       the documentation for your IdP.</p>
-     */
+    
     Scope?: string;
-    /**
-     * <p>The maximum duration of the authentication session, in seconds. The default is 604800
-     *       seconds (7 days).</p>
-     */
+    
     SessionTimeout?: number;
-    /**
-     * <p>The query parameters (up to 10) to include in the redirect request to the authorization
-     *       endpoint.</p>
-     */
+    
     AuthenticationRequestExtraParams?: {
         [key: string]: string;
     };
-    /**
-     * <p>The behavior if the user is not authenticated. The following are possible values:</p>
-     *          <ul>
-     *             <li>
-     *                <p>deny<code></code> - Return an HTTP 401 Unauthorized error.</p>
-     *             </li>
-     *             <li>
-     *                <p>allow<code></code> - Allow the request to be forwarded to the target.</p>
-     *             </li>
-     *             <li>
-     *                <p>authenticate<code></code> - Redirect the request to the IdP authorization endpoint. This is
-     *           the default value.</p>
-     *             </li>
-     *          </ul>
-     */
+    
     OnUnauthenticatedRequest?: AuthenticateCognitoActionConditionalBehaviorEnum | string;
 }
 export declare namespace AuthenticateCognitoActionConfig {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: AuthenticateCognitoActionConfig) => any;
 }
 export declare enum AuthenticateOidcActionConditionalBehaviorEnum {
@@ -73,244 +34,106 @@ export declare enum AuthenticateOidcActionConditionalBehaviorEnum {
     AUTHENTICATE = "authenticate",
     DENY = "deny"
 }
-/**
- * <p>Request parameters when using an identity provider (IdP) that is compliant with OpenID
- *       Connect (OIDC) to authenticate users.</p>
- */
+
 export interface AuthenticateOidcActionConfig {
-    /**
-     * <p>The OIDC issuer identifier of the IdP. This must be a full URL, including the HTTPS
-     *       protocol, the domain, and the path.</p>
-     */
+    
     Issuer: string | undefined;
-    /**
-     * <p>The authorization endpoint of the IdP. This must be a full URL, including the HTTPS
-     *       protocol, the domain, and the path.</p>
-     */
+    
     AuthorizationEndpoint: string | undefined;
-    /**
-     * <p>The token endpoint of the IdP. This must be a full URL, including the HTTPS protocol, the
-     *       domain, and the path.</p>
-     */
+    
     TokenEndpoint: string | undefined;
-    /**
-     * <p>The user info endpoint of the IdP. This must be a full URL, including the HTTPS protocol,
-     *       the domain, and the path.</p>
-     */
+    
     UserInfoEndpoint: string | undefined;
-    /**
-     * <p>The OAuth 2.0 client identifier.</p>
-     */
+    
     ClientId: string | undefined;
-    /**
-     * <p>The OAuth 2.0 client secret. This parameter is required if you are creating a rule. If you
-     *       are modifying a rule, you can omit this parameter if you set
-     *         <code>UseExistingClientSecret</code> to true.</p>
-     */
+    
     ClientSecret?: string;
-    /**
-     * <p>The name of the cookie used to maintain session information. The default is
-     *       AWSELBAuthSessionCookie.</p>
-     */
+    
     SessionCookieName?: string;
-    /**
-     * <p>The set of user claims to be requested from the IdP. The default is
-     *       <code>openid</code>.</p>
-     *          <p>To verify which scope values your IdP supports and how to separate multiple values, see
-     *       the documentation for your IdP.</p>
-     */
+    
     Scope?: string;
-    /**
-     * <p>The maximum duration of the authentication session, in seconds. The default is 604800
-     *       seconds (7 days).</p>
-     */
+    
     SessionTimeout?: number;
-    /**
-     * <p>The query parameters (up to 10) to include in the redirect request to the authorization
-     *       endpoint.</p>
-     */
+    
     AuthenticationRequestExtraParams?: {
         [key: string]: string;
     };
-    /**
-     * <p>The behavior if the user is not authenticated. The following are possible values:</p>
-     *          <ul>
-     *             <li>
-     *                <p>deny<code></code> - Return an HTTP 401 Unauthorized error.</p>
-     *             </li>
-     *             <li>
-     *                <p>allow<code></code> - Allow the request to be forwarded to the target.</p>
-     *             </li>
-     *             <li>
-     *                <p>authenticate<code></code> - Redirect the request to the IdP authorization endpoint. This is
-     *           the default value.</p>
-     *             </li>
-     *          </ul>
-     */
+    
     OnUnauthenticatedRequest?: AuthenticateOidcActionConditionalBehaviorEnum | string;
-    /**
-     * <p>Indicates whether to use the existing client secret when modifying a rule. If you are
-     *       creating a rule, you can omit this parameter or set it to false.</p>
-     */
+    
     UseExistingClientSecret?: boolean;
 }
 export declare namespace AuthenticateOidcActionConfig {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: AuthenticateOidcActionConfig) => any;
 }
-/**
- * <p>Information about an action that returns a custom HTTP response.</p>
- */
+
 export interface FixedResponseActionConfig {
-    /**
-     * <p>The message.</p>
-     */
+    
     MessageBody?: string;
-    /**
-     * <p>The HTTP response code (2XX, 4XX, or 5XX).</p>
-     */
+    
     StatusCode: string | undefined;
-    /**
-     * <p>The content type.</p>
-     *          <p>Valid Values: text/plain | text/css | text/html | application/javascript |
-     *       application/json</p>
-     */
+    
     ContentType?: string;
 }
 export declare namespace FixedResponseActionConfig {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: FixedResponseActionConfig) => any;
 }
-/**
- * <p>Information about how traffic will be distributed between multiple target groups in a
- *       forward rule.</p>
- */
+
 export interface TargetGroupTuple {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the target group.</p>
-     */
+    
     TargetGroupArn?: string;
-    /**
-     * <p>The weight. The range is 0 to 999.</p>
-     */
+    
     Weight?: number;
 }
 export declare namespace TargetGroupTuple {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: TargetGroupTuple) => any;
 }
-/**
- * <p>Information about the target group stickiness for a rule.</p>
- */
+
 export interface TargetGroupStickinessConfig {
-    /**
-     * <p>Indicates whether target group stickiness is enabled.</p>
-     */
+    
     Enabled?: boolean;
-    /**
-     * <p>The time period, in seconds, during which requests from a client should be routed to the
-     *       same target group. The range is 1-604800 seconds (7 days).</p>
-     */
+    
     DurationSeconds?: number;
 }
 export declare namespace TargetGroupStickinessConfig {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: TargetGroupStickinessConfig) => any;
 }
-/**
- * <p>Information about a forward action.</p>
- */
+
 export interface ForwardActionConfig {
-    /**
-     * <p>One or more target groups. For Network Load Balancers, you can specify a single target
-     *       group.</p>
-     */
+    
     TargetGroups?: TargetGroupTuple[];
-    /**
-     * <p>The target group stickiness for the rule.</p>
-     */
+    
     TargetGroupStickinessConfig?: TargetGroupStickinessConfig;
 }
 export declare namespace ForwardActionConfig {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: ForwardActionConfig) => any;
 }
 export declare enum RedirectActionStatusCodeEnum {
     HTTP_301 = "HTTP_301",
     HTTP_302 = "HTTP_302"
 }
-/**
- * <p>Information about a redirect action.</p>
- *          <p>A URI consists of the following components: protocol://hostname:port/path?query. You must
- *       modify at least one of the following components to avoid a redirect loop: protocol, hostname,
- *       port, or path. Any components that you do not modify retain their original values.</p>
- *          <p>You can reuse URI components using the following reserved keywords:</p>
- *          <ul>
- *             <li>
- *                <p>#{protocol}</p>
- *             </li>
- *             <li>
- *                <p>#{host}</p>
- *             </li>
- *             <li>
- *                <p>#{port}</p>
- *             </li>
- *             <li>
- *                <p>#{path} (the leading "/" is removed)</p>
- *             </li>
- *             <li>
- *                <p>#{query}</p>
- *             </li>
- *          </ul>
- *          <p>For example, you can change the path to "/new/#{path}", the hostname to "example.#{host}",
- *       or the query to "#{query}&value=xyz".</p>
- */
+
 export interface RedirectActionConfig {
-    /**
-     * <p>The protocol. You can specify HTTP, HTTPS, or #{protocol}. You can redirect HTTP to HTTP,
-     *       HTTP to HTTPS, and HTTPS to HTTPS. You cannot redirect HTTPS to HTTP.</p>
-     */
+    
     Protocol?: string;
-    /**
-     * <p>The port. You can specify a value from 1 to 65535 or #{port}.</p>
-     */
+    
     Port?: string;
-    /**
-     * <p>The hostname. This component is not percent-encoded. The hostname can contain
-     *       #{host}.</p>
-     */
+    
     Host?: string;
-    /**
-     * <p>The absolute path, starting with the leading "/". This component is not percent-encoded.
-     *       The path can contain #{host}, #{path}, and #{port}.</p>
-     */
+    
     Path?: string;
-    /**
-     * <p>The query parameters, URL-encoded when necessary, but not percent-encoded. Do not include
-     *       the leading "?", as it is automatically added. You can specify any of the reserved
-     *       keywords.</p>
-     */
+    
     Query?: string;
-    /**
-     * <p>The HTTP redirect code. The redirect is either permanent (HTTP 301) or temporary (HTTP
-     *       302).</p>
-     */
+    
     StatusCode: RedirectActionStatusCodeEnum | string | undefined;
 }
 export declare namespace RedirectActionConfig {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: RedirectActionConfig) => any;
 }
 export declare enum ActionTypeEnum {
@@ -320,696 +143,408 @@ export declare enum ActionTypeEnum {
     FORWARD = "forward",
     REDIRECT = "redirect"
 }
-/**
- * <p>Information about an action.</p>
- *          <p>Each rule must include exactly one of the following types of actions:
- *       <code>forward</code>, <code>fixed-response</code>, or <code>redirect</code>, and it must be
- *       the last action to be performed.</p>
- */
+
 export interface Action {
-    /**
-     * <p>The type of action.</p>
-     */
+    
     Type: ActionTypeEnum | string | undefined;
-    /**
-     * <p>The Amazon Resource Name (ARN) of the target group. Specify only when <code>Type</code> is
-     *         <code>forward</code> and you want to route to a single target group. To route to one or more
-     *       target groups, use <code>ForwardConfig</code> instead.</p>
-     */
+    
     TargetGroupArn?: string;
-    /**
-     * <p>[HTTPS listeners] Information about an identity provider that is compliant with OpenID
-     *       Connect (OIDC). Specify only when <code>Type</code> is <code>authenticate-oidc</code>.</p>
-     */
+    
     AuthenticateOidcConfig?: AuthenticateOidcActionConfig;
-    /**
-     * <p>[HTTPS listeners] Information for using Amazon Cognito to authenticate users. Specify only
-     *       when <code>Type</code> is <code>authenticate-cognito</code>.</p>
-     */
+    
     AuthenticateCognitoConfig?: AuthenticateCognitoActionConfig;
-    /**
-     * <p>The order for the action. This value is required for rules with multiple actions. The
-     *       action with the lowest value for order is performed first.</p>
-     */
+    
     Order?: number;
-    /**
-     * <p>[Application Load Balancer] Information for creating a redirect action. Specify only when
-     *         <code>Type</code> is <code>redirect</code>.</p>
-     */
+    
     RedirectConfig?: RedirectActionConfig;
-    /**
-     * <p>[Application Load Balancer] Information for creating an action that returns a custom HTTP
-     *       response. Specify only when <code>Type</code> is <code>fixed-response</code>.</p>
-     */
+    
     FixedResponseConfig?: FixedResponseActionConfig;
-    /**
-     * <p>Information for creating an action that distributes requests among one or more target
-     *       groups. For Network Load Balancers, you can specify a single target group. Specify only when
-     *         <code>Type</code> is <code>forward</code>. If you specify both <code>ForwardConfig</code>
-     *       and <code>TargetGroupArn</code>, you can specify only one target group using
-     *         <code>ForwardConfig</code> and it must be the same target group specified in
-     *         <code>TargetGroupArn</code>.</p>
-     */
+    
     ForwardConfig?: ForwardActionConfig;
 }
 export declare namespace Action {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: Action) => any;
 }
-/**
- * <p>Information about an SSL server certificate.</p>
- */
+
 export interface Certificate {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the certificate.</p>
-     */
+    
     CertificateArn?: string;
-    /**
-     * <p>Indicates whether the certificate is the default certificate. Do not set this value when
-     *       specifying a certificate as an input. This value is not included in the output when describing
-     *       a listener, but is included when describing listener certificates.</p>
-     */
+    
     IsDefault?: boolean;
 }
 export declare namespace Certificate {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: Certificate) => any;
 }
 export interface AddListenerCertificatesInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the listener.</p>
-     */
+    
     ListenerArn: string | undefined;
-    /**
-     * <p>The certificate to add. You can specify one certificate per call. Set
-     *         <code>CertificateArn</code> to the certificate ARN but do not set
-     *       <code>IsDefault</code>.</p>
-     */
+    
     Certificates: Certificate[] | undefined;
 }
 export declare namespace AddListenerCertificatesInput {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: AddListenerCertificatesInput) => any;
 }
 export interface AddListenerCertificatesOutput {
-    /**
-     * <p>Information about the certificates in the certificate list.</p>
-     */
+    
     Certificates?: Certificate[];
 }
 export declare namespace AddListenerCertificatesOutput {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: AddListenerCertificatesOutput) => any;
 }
-/**
- * <p>The specified certificate does not exist.</p>
- */
+
 export interface CertificateNotFoundException extends __SmithyException, $MetadataBearer {
     name: "CertificateNotFoundException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace CertificateNotFoundException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: CertificateNotFoundException) => any;
 }
-/**
- * <p>The specified listener does not exist.</p>
- */
+
 export interface ListenerNotFoundException extends __SmithyException, $MetadataBearer {
     name: "ListenerNotFoundException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace ListenerNotFoundException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: ListenerNotFoundException) => any;
 }
-/**
- * <p>You've reached the limit on the number of certificates per load balancer.</p>
- */
+
 export interface TooManyCertificatesException extends __SmithyException, $MetadataBearer {
     name: "TooManyCertificatesException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace TooManyCertificatesException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: TooManyCertificatesException) => any;
 }
-/**
- * <p>Information about a tag.</p>
- */
+
 export interface Tag {
-    /**
-     * <p>The key of the tag.</p>
-     */
+    
     Key: string | undefined;
-    /**
-     * <p>The value of the tag.</p>
-     */
+    
     Value?: string;
 }
 export declare namespace Tag {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: Tag) => any;
 }
 export interface AddTagsInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the resource.</p>
-     */
+    
     ResourceArns: string[] | undefined;
-    /**
-     * <p>The tags.</p>
-     */
+    
     Tags: Tag[] | undefined;
 }
 export declare namespace AddTagsInput {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: AddTagsInput) => any;
 }
 export interface AddTagsOutput {
 }
 export declare namespace AddTagsOutput {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: AddTagsOutput) => any;
 }
-/**
- * <p>A tag key was specified more than once.</p>
- */
+
 export interface DuplicateTagKeysException extends __SmithyException, $MetadataBearer {
     name: "DuplicateTagKeysException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace DuplicateTagKeysException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: DuplicateTagKeysException) => any;
 }
-/**
- * <p>The specified load balancer does not exist.</p>
- */
+
 export interface LoadBalancerNotFoundException extends __SmithyException, $MetadataBearer {
     name: "LoadBalancerNotFoundException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace LoadBalancerNotFoundException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: LoadBalancerNotFoundException) => any;
 }
-/**
- * <p>The specified rule does not exist.</p>
- */
+
 export interface RuleNotFoundException extends __SmithyException, $MetadataBearer {
     name: "RuleNotFoundException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace RuleNotFoundException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: RuleNotFoundException) => any;
 }
-/**
- * <p>The specified target group does not exist.</p>
- */
+
 export interface TargetGroupNotFoundException extends __SmithyException, $MetadataBearer {
     name: "TargetGroupNotFoundException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace TargetGroupNotFoundException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: TargetGroupNotFoundException) => any;
 }
-/**
- * <p>You've reached the limit on the number of tags per load balancer.</p>
- */
+
 export interface TooManyTagsException extends __SmithyException, $MetadataBearer {
     name: "TooManyTagsException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace TooManyTagsException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: TooManyTagsException) => any;
 }
-/**
- * <p>The specified allocation ID does not exist.</p>
- */
+
 export interface AllocationIdNotFoundException extends __SmithyException, $MetadataBearer {
     name: "AllocationIdNotFoundException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace AllocationIdNotFoundException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: AllocationIdNotFoundException) => any;
 }
-/**
- * <p>The specified ALPN policy is not supported.</p>
- */
+
 export interface ALPNPolicyNotSupportedException extends __SmithyException, $MetadataBearer {
     name: "ALPNPolicyNotSupportedException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace ALPNPolicyNotSupportedException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: ALPNPolicyNotSupportedException) => any;
 }
-/**
- * <p>Information about a static IP address for a load balancer.</p>
- */
+
 export interface LoadBalancerAddress {
-    /**
-     * <p>The static IP address.</p>
-     */
+    
     IpAddress?: string;
-    /**
-     * <p>[Network Load Balancers] The allocation ID of the Elastic IP address for an
-     *       internal-facing load balancer.</p>
-     */
+    
     AllocationId?: string;
-    /**
-     * <p>[Network Load Balancers] The private IPv4 address for an internal load balancer.</p>
-     */
+    
     PrivateIPv4Address?: string;
-    /**
-     * <p>[Network Load Balancers] The IPv6 address.</p>
-     */
+    
     IPv6Address?: string;
 }
 export declare namespace LoadBalancerAddress {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: LoadBalancerAddress) => any;
 }
-/**
- * <p>Information about an Availability Zone.</p>
- */
+
 export interface AvailabilityZone {
-    /**
-     * <p>The name of the Availability Zone.</p>
-     */
+    
     ZoneName?: string;
-    /**
-     * <p>The ID of the subnet. You can specify one subnet per Availability Zone.</p>
-     */
+    
     SubnetId?: string;
-    /**
-     * <p>[Application Load Balancers on Outposts] The ID of the Outpost.</p>
-     */
+    
     OutpostId?: string;
-    /**
-     * <p>[Network Load Balancers] If you need static IP addresses for your load balancer, you can
-     *       specify one Elastic IP address per Availability Zone when you create an internal-facing load
-     *       balancer. For internal load balancers, you can specify a private IP address from the IPv4
-     *       range of the subnet.</p>
-     */
+    
     LoadBalancerAddresses?: LoadBalancerAddress[];
 }
 export declare namespace AvailabilityZone {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: AvailabilityZone) => any;
 }
-/**
- * <p>The specified Availability Zone is not supported.</p>
- */
+
 export interface AvailabilityZoneNotSupportedException extends __SmithyException, $MetadataBearer {
     name: "AvailabilityZoneNotSupportedException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace AvailabilityZoneNotSupportedException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: AvailabilityZoneNotSupportedException) => any;
 }
-/**
- * <p>Information about a cipher used in a policy.</p>
- */
+
 export interface Cipher {
-    /**
-     * <p>The name of the cipher.</p>
-     */
+    
     Name?: string;
-    /**
-     * <p>The priority of the cipher.</p>
-     */
+    
     Priority?: number;
 }
 export declare namespace Cipher {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: Cipher) => any;
 }
 export declare type ProtocolEnum = "GENEVE" | "HTTP" | "HTTPS" | "TCP" | "TCP_UDP" | "TLS" | "UDP";
 export interface CreateListenerInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the load balancer.</p>
-     */
+    
     LoadBalancerArn: string | undefined;
-    /**
-     * <p>The protocol for connections from clients to the load balancer. For Application Load
-     *       Balancers, the supported protocols are HTTP and HTTPS. For Network Load Balancers, the
-     *       supported protocols are TCP, TLS, UDP, and TCP_UDP. You can’t specify the UDP or TCP_UDP
-     *       protocol if dual-stack mode is enabled. You cannot specify a protocol for a Gateway Load
-     *       Balancer.</p>
-     */
+    
     Protocol?: ProtocolEnum | string;
-    /**
-     * <p>The port on which the load balancer is listening. You cannot specify a port for a Gateway
-     *       Load Balancer.</p>
-     */
+    
     Port?: number;
-    /**
-     * <p>[HTTPS and TLS listeners] The security policy that defines which protocols and ciphers are
-     *       supported.</p>
-     *          <p>For more information, see <a href="https://docs.aws.amazon.com/elasticloadbalancing/latest/application/create-https-listener.html#describe-ssl-policies">Security policies</a> in the <i>Application Load Balancers Guide</i> and
-     *         <a href="https://docs.aws.amazon.com/elasticloadbalancing/latest/network/create-tls-listener.html#describe-ssl-policies">Security policies</a> in the <i>Network Load Balancers Guide</i>.</p>
-     */
+    
     SslPolicy?: string;
-    /**
-     * <p>[HTTPS and TLS listeners] The default certificate for the listener. You must provide
-     *       exactly one certificate. Set <code>CertificateArn</code> to the certificate ARN but do not set
-     *         <code>IsDefault</code>.</p>
-     */
+    
     Certificates?: Certificate[];
-    /**
-     * <p>The actions for the default rule.</p>
-     */
+    
     DefaultActions: Action[] | undefined;
-    /**
-     * <p>[TLS listeners] The name of the Application-Layer Protocol Negotiation (ALPN) policy. You
-     *       can specify one policy name. The following are the possible values:</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>HTTP1Only</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>HTTP2Only</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>HTTP2Optional</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>HTTP2Preferred</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>None</code>
-     *                </p>
-     *             </li>
-     *          </ul>
-     *          <p>For more information, see <a href="https://docs.aws.amazon.com/elasticloadbalancing/latest/network/create-tls-listener.html#alpn-policies">ALPN
-     *         policies</a> in the <i>Network Load Balancers Guide</i>.</p>
-     */
+    
     AlpnPolicy?: string[];
-    /**
-     * <p>The tags to assign to the listener.</p>
-     */
+    
     Tags?: Tag[];
 }
 export declare namespace CreateListenerInput {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: CreateListenerInput) => any;
 }
-/**
- * <p>Information about a listener.</p>
- */
+
 export interface Listener {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the listener.</p>
-     */
+    
     ListenerArn?: string;
-    /**
-     * <p>The Amazon Resource Name (ARN) of the load balancer.</p>
-     */
+    
     LoadBalancerArn?: string;
-    /**
-     * <p>The port on which the load balancer is listening.</p>
-     */
+    
     Port?: number;
-    /**
-     * <p>The protocol for connections from clients to the load balancer.</p>
-     */
+    
     Protocol?: ProtocolEnum | string;
-    /**
-     * <p>[HTTPS or TLS listener] The default certificate for the listener.</p>
-     */
+    
     Certificates?: Certificate[];
-    /**
-     * <p>[HTTPS or TLS listener] The security policy that defines which protocols and ciphers are
-     *       supported.</p>
-     */
+    
     SslPolicy?: string;
-    /**
-     * <p>The default actions for the listener.</p>
-     */
+    
     DefaultActions?: Action[];
-    /**
-     * <p>[TLS listener] The name of the Application-Layer Protocol Negotiation (ALPN)
-     *       policy.</p>
-     */
+    
     AlpnPolicy?: string[];
 }
 export declare namespace Listener {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: Listener) => any;
 }
 export interface CreateListenerOutput {
-    /**
-     * <p>Information about the listener.</p>
-     */
+    
     Listeners?: Listener[];
 }
 export declare namespace CreateListenerOutput {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: CreateListenerOutput) => any;
 }
-/**
- * <p>A listener with the specified port already exists.</p>
- */
+
 export interface DuplicateListenerException extends __SmithyException, $MetadataBearer {
     name: "DuplicateListenerException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace DuplicateListenerException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: DuplicateListenerException) => any;
 }
-/**
- * <p>The specified configuration is not valid with this protocol.</p>
- */
+
 export interface IncompatibleProtocolsException extends __SmithyException, $MetadataBearer {
     name: "IncompatibleProtocolsException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace IncompatibleProtocolsException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: IncompatibleProtocolsException) => any;
 }
-/**
- * <p>The requested configuration is not valid.</p>
- */
+
 export interface InvalidConfigurationRequestException extends __SmithyException, $MetadataBearer {
     name: "InvalidConfigurationRequestException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace InvalidConfigurationRequestException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: InvalidConfigurationRequestException) => any;
 }
-/**
- * <p>The requested action is not valid.</p>
- */
+
 export interface InvalidLoadBalancerActionException extends __SmithyException, $MetadataBearer {
     name: "InvalidLoadBalancerActionException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace InvalidLoadBalancerActionException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: InvalidLoadBalancerActionException) => any;
 }
-/**
- * <p>The specified SSL policy does not exist.</p>
- */
+
 export interface SSLPolicyNotFoundException extends __SmithyException, $MetadataBearer {
     name: "SSLPolicyNotFoundException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace SSLPolicyNotFoundException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: SSLPolicyNotFoundException) => any;
 }
-/**
- * <p>You've reached the limit on the number of load balancers per target group.</p>
- */
+
 export interface TargetGroupAssociationLimitException extends __SmithyException, $MetadataBearer {
     name: "TargetGroupAssociationLimitException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace TargetGroupAssociationLimitException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: TargetGroupAssociationLimitException) => any;
 }
-/**
- * <p>You've reached the limit on the number of actions per rule.</p>
- */
+
 export interface TooManyActionsException extends __SmithyException, $MetadataBearer {
     name: "TooManyActionsException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace TooManyActionsException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: TooManyActionsException) => any;
 }
-/**
- * <p>You've reached the limit on the number of listeners per load balancer.</p>
- */
+
 export interface TooManyListenersException extends __SmithyException, $MetadataBearer {
     name: "TooManyListenersException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace TooManyListenersException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: TooManyListenersException) => any;
 }
-/**
- * <p>You've reached the limit on the number of times a target can be registered with a load
- *       balancer.</p>
- */
+
 export interface TooManyRegistrationsForTargetIdException extends __SmithyException, $MetadataBearer {
     name: "TooManyRegistrationsForTargetIdException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace TooManyRegistrationsForTargetIdException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: TooManyRegistrationsForTargetIdException) => any;
 }
-/**
- * <p>You've reached the limit on the number of targets.</p>
- */
+
 export interface TooManyTargetsException extends __SmithyException, $MetadataBearer {
     name: "TooManyTargetsException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace TooManyTargetsException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: TooManyTargetsException) => any;
 }
-/**
- * <p>You've reached the limit on the number of unique target groups per load balancer across
- *       all listeners. If a target group is used by multiple actions for a load balancer, it is
- *       counted as only one use.</p>
- */
+
 export interface TooManyUniqueTargetGroupsPerLoadBalancerException extends __SmithyException, $MetadataBearer {
     name: "TooManyUniqueTargetGroupsPerLoadBalancerException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace TooManyUniqueTargetGroupsPerLoadBalancerException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: TooManyUniqueTargetGroupsPerLoadBalancerException) => any;
 }
-/**
- * <p>The specified protocol is not supported.</p>
- */
+
 export interface UnsupportedProtocolException extends __SmithyException, $MetadataBearer {
     name: "UnsupportedProtocolException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace UnsupportedProtocolException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: UnsupportedProtocolException) => any;
 }
 export declare enum IpAddressType {
@@ -1020,32 +555,19 @@ export declare enum LoadBalancerSchemeEnum {
     INTERNAL = "internal",
     INTERNET_FACING = "internet-facing"
 }
-/**
- * <p>Information about a subnet mapping.</p>
- */
+
 export interface SubnetMapping {
-    /**
-     * <p>The ID of the subnet.</p>
-     */
+    
     SubnetId?: string;
-    /**
-     * <p>[Network Load Balancers] The allocation ID of the Elastic IP address for an
-     *       internet-facing load balancer.</p>
-     */
+    
     AllocationId?: string;
-    /**
-     * <p>[Network Load Balancers] The private IPv4 address for an internal load balancer.</p>
-     */
+    
     PrivateIPv4Address?: string;
-    /**
-     * <p>[Network Load Balancers] The IPv6 address.</p>
-     */
+    
     IPv6Address?: string;
 }
 export declare namespace SubnetMapping {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: SubnetMapping) => any;
 }
 export declare enum LoadBalancerTypeEnum {
@@ -1054,85 +576,27 @@ export declare enum LoadBalancerTypeEnum {
     NETWORK = "network"
 }
 export interface CreateLoadBalancerInput {
-    /**
-     * <p>The name of the load balancer.</p>
-     *          <p>This name must be unique per region per account, can have a maximum of 32 characters, must
-     *       contain only alphanumeric characters or hyphens, must not begin or end with a hyphen, and must
-     *       not begin with "internal-".</p>
-     */
+    
     Name: string | undefined;
-    /**
-     * <p>The IDs of the public subnets. You can specify only one subnet per Availability Zone. You
-     *       must specify either subnets or subnet mappings.</p>
-     *          <p>[Application Load Balancers] You must specify subnets from at least two Availability
-     *       Zones.</p>
-     *          <p>[Application Load Balancers on Outposts] You must specify one Outpost subnet.</p>
-     *          <p>[Application Load Balancers on Local Zones] You can specify subnets from one or more Local
-     *       Zones.</p>
-     *          <p>[Network Load Balancers] You can specify subnets from one or more Availability
-     *       Zones.</p>
-     *          <p>[Gateway Load Balancers] You can specify subnets from one or more Availability
-     *       Zones.</p>
-     */
+    
     Subnets?: string[];
-    /**
-     * <p>The IDs of the public subnets. You can specify only one subnet per Availability Zone. You
-     *       must specify either subnets or subnet mappings.</p>
-     *          <p>[Application Load Balancers] You must specify subnets from at least two Availability
-     *       Zones. You cannot specify Elastic IP addresses for your subnets.</p>
-     *          <p>[Application Load Balancers on Outposts] You must specify one Outpost subnet.</p>
-     *          <p>[Application Load Balancers on Local Zones] You can specify subnets from one or more Local
-     *       Zones.</p>
-     *          <p>[Network Load Balancers] You can specify subnets from one or more Availability Zones. You
-     *       can specify one Elastic IP address per subnet if you need static IP addresses for your
-     *       internet-facing load balancer. For internal load balancers, you can specify one private IP
-     *       address per subnet from the IPv4 range of the subnet. For internet-facing load balancer, you
-     *       can specify one IPv6 address per subnet.</p>
-     *          <p>[Gateway Load Balancers] You can specify subnets from one or more Availability Zones. You
-     *       cannot specify Elastic IP addresses for your subnets.</p>
-     */
+    
     SubnetMappings?: SubnetMapping[];
-    /**
-     * <p>[Application Load Balancers] The IDs of the security groups for the load balancer.</p>
-     */
+    
     SecurityGroups?: string[];
-    /**
-     * <p>The nodes of an Internet-facing load balancer have public IP addresses. The DNS name of an
-     *       Internet-facing load balancer is publicly resolvable to the public IP addresses of the nodes.
-     *       Therefore, Internet-facing load balancers can route requests from clients over the
-     *       internet.</p>
-     *          <p>The nodes of an internal load balancer have only private IP addresses. The DNS name of an
-     *       internal load balancer is publicly resolvable to the private IP addresses of the nodes.
-     *       Therefore, internal load balancers can route requests only from clients with access to the VPC
-     *       for the load balancer.</p>
-     *          <p>The default is an Internet-facing load balancer.</p>
-     *          <p>You cannot specify a scheme for a Gateway Load Balancer.</p>
-     */
+    
     Scheme?: LoadBalancerSchemeEnum | string;
-    /**
-     * <p>The tags to assign to the load balancer.</p>
-     */
+    
     Tags?: Tag[];
-    /**
-     * <p>The type of load balancer. The default is <code>application</code>.</p>
-     */
+    
     Type?: LoadBalancerTypeEnum | string;
-    /**
-     * <p>The type of IP addresses used by the subnets for your load balancer. The possible values
-     *       are <code>ipv4</code> (for IPv4 addresses) and <code>dualstack</code> (for IPv4 and IPv6
-     *       addresses). Internal load balancers must use <code>ipv4</code>.</p>
-     */
+    
     IpAddressType?: IpAddressType | string;
-    /**
-     * <p>[Application Load Balancers on Outposts] The ID of the customer-owned address pool (CoIP
-     *       pool).</p>
-     */
+    
     CustomerOwnedIpv4Pool?: string;
 }
 export declare namespace CreateLoadBalancerInput {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: CreateLoadBalancerInput) => any;
 }
 export declare enum LoadBalancerStateEnum {
@@ -1141,2489 +605,207 @@ export declare enum LoadBalancerStateEnum {
     FAILED = "failed",
     PROVISIONING = "provisioning"
 }
-/**
- * <p>Information about the state of the load balancer.</p>
- */
+
 export interface LoadBalancerState {
-    /**
-     * <p>The state code. The initial state of the load balancer is <code>provisioning</code>. After
-     *       the load balancer is fully set up and ready to route traffic, its state is
-     *       <code>active</code>. If load balancer is routing traffic but does not have the resources it
-     *       needs to scale, its state is<code>active_impaired</code>. If the load balancer could not be
-     *       set up, its state is <code>failed</code>.</p>
-     */
+    
     Code?: LoadBalancerStateEnum | string;
-    /**
-     * <p>A description of the state.</p>
-     */
+    
     Reason?: string;
 }
 export declare namespace LoadBalancerState {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: LoadBalancerState) => any;
 }
-/**
- * <p>Information about a load balancer.</p>
- */
+
 export interface LoadBalancer {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the load balancer.</p>
-     */
+    
     LoadBalancerArn?: string;
-    /**
-     * <p>The public DNS name of the load balancer.</p>
-     */
+    
     DNSName?: string;
-    /**
-     * <p>The ID of the Amazon Route 53 hosted zone associated with the load balancer.</p>
-     */
+    
     CanonicalHostedZoneId?: string;
-    /**
-     * <p>The date and time the load balancer was created.</p>
-     */
+    
     CreatedTime?: Date;
-    /**
-     * <p>The name of the load balancer.</p>
-     */
+    
     LoadBalancerName?: string;
-    /**
-     * <p>The nodes of an Internet-facing load balancer have public IP addresses. The DNS name of an
-     *       Internet-facing load balancer is publicly resolvable to the public IP addresses of the nodes.
-     *       Therefore, Internet-facing load balancers can route requests from clients over the
-     *       internet.</p>
-     *          <p>The nodes of an internal load balancer have only private IP addresses. The DNS name of an
-     *       internal load balancer is publicly resolvable to the private IP addresses of the nodes.
-     *       Therefore, internal load balancers can route requests only from clients with access to the VPC
-     *       for the load balancer.</p>
-     */
+    
     Scheme?: LoadBalancerSchemeEnum | string;
-    /**
-     * <p>The ID of the VPC for the load balancer.</p>
-     */
+    
     VpcId?: string;
-    /**
-     * <p>The state of the load balancer.</p>
-     */
+    
     State?: LoadBalancerState;
-    /**
-     * <p>The type of load balancer.</p>
-     */
+    
     Type?: LoadBalancerTypeEnum | string;
-    /**
-     * <p>The subnets for the load balancer.</p>
-     */
+    
     AvailabilityZones?: AvailabilityZone[];
-    /**
-     * <p>The IDs of the security groups for the load balancer.</p>
-     */
+    
     SecurityGroups?: string[];
-    /**
-     * <p>The type of IP addresses used by the subnets for your load balancer. The possible values
-     *       are <code>ipv4</code> (for IPv4 addresses) and <code>dualstack</code> (for IPv4 and IPv6
-     *       addresses).</p>
-     */
+    
     IpAddressType?: IpAddressType | string;
-    /**
-     * <p>[Application Load Balancers on Outposts] The ID of the customer-owned address pool.</p>
-     */
+    
     CustomerOwnedIpv4Pool?: string;
 }
 export declare namespace LoadBalancer {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: LoadBalancer) => any;
 }
 export interface CreateLoadBalancerOutput {
-    /**
-     * <p>Information about the load balancer.</p>
-     */
+    
     LoadBalancers?: LoadBalancer[];
 }
 export declare namespace CreateLoadBalancerOutput {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: CreateLoadBalancerOutput) => any;
 }
-/**
- * <p>A load balancer with the specified name already exists.</p>
- */
+
 export interface DuplicateLoadBalancerNameException extends __SmithyException, $MetadataBearer {
     name: "DuplicateLoadBalancerNameException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace DuplicateLoadBalancerNameException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: DuplicateLoadBalancerNameException) => any;
 }
-/**
- * <p>The requested scheme is not valid.</p>
- */
+
 export interface InvalidSchemeException extends __SmithyException, $MetadataBearer {
     name: "InvalidSchemeException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace InvalidSchemeException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: InvalidSchemeException) => any;
 }
-/**
- * <p>The specified security group does not exist.</p>
- */
+
 export interface InvalidSecurityGroupException extends __SmithyException, $MetadataBearer {
     name: "InvalidSecurityGroupException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace InvalidSecurityGroupException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: InvalidSecurityGroupException) => any;
 }
-/**
- * <p>The specified subnet is out of available addresses.</p>
- */
+
 export interface InvalidSubnetException extends __SmithyException, $MetadataBearer {
     name: "InvalidSubnetException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace InvalidSubnetException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: InvalidSubnetException) => any;
 }
-/**
- * <p>This operation is not allowed.</p>
- */
+
 export interface OperationNotPermittedException extends __SmithyException, $MetadataBearer {
     name: "OperationNotPermittedException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace OperationNotPermittedException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: OperationNotPermittedException) => any;
 }
-/**
- * <p>A specified resource is in use.</p>
- */
+
 export interface ResourceInUseException extends __SmithyException, $MetadataBearer {
     name: "ResourceInUseException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace ResourceInUseException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: ResourceInUseException) => any;
 }
-/**
- * <p>The specified subnet does not exist.</p>
- */
+
 export interface SubnetNotFoundException extends __SmithyException, $MetadataBearer {
     name: "SubnetNotFoundException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace SubnetNotFoundException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: SubnetNotFoundException) => any;
 }
-/**
- * <p>You've reached the limit on the number of load balancers for your Amazon Web Services
- *       account.</p>
- */
+
 export interface TooManyLoadBalancersException extends __SmithyException, $MetadataBearer {
     name: "TooManyLoadBalancersException";
     $fault: "client";
     Message?: string;
 }
 export declare namespace TooManyLoadBalancersException {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: TooManyLoadBalancersException) => any;
 }
-/**
- * <p>Information about a host header condition.</p>
- */
+
 export interface HostHeaderConditionConfig {
-    /**
-     * <p>One or more host names. The maximum size of each name is 128 characters. The comparison is
-     *       case insensitive. The following wildcard characters are supported: * (matches 0 or more
-     *       characters) and ? (matches exactly 1 character).</p>
-     *          <p>If you specify multiple strings, the condition is satisfied if one of the strings matches
-     *       the host name.</p>
-     */
+    
     Values?: string[];
 }
 export declare namespace HostHeaderConditionConfig {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: HostHeaderConditionConfig) => any;
 }
-/**
- * <p>Information about an HTTP header condition.</p>
- *          <p>There is a set of standard HTTP header fields. You can also define custom HTTP header
- *       fields.</p>
- */
+
 export interface HttpHeaderConditionConfig {
-    /**
-     * <p>The name of the HTTP header field. The maximum size is 40 characters. The header name is
-     *       case insensitive. The allowed characters are specified by RFC 7230. Wildcards are not
-     *       supported.</p>
-     *          <p>You can't use an HTTP header condition to specify the host header. Use <a>HostHeaderConditionConfig</a> to specify a host header condition.</p>
-     */
+    
     HttpHeaderName?: string;
-    /**
-     * <p>One or more strings to compare against the value of the HTTP header. The maximum size of
-     *       each string is 128 characters. The comparison strings are case insensitive. The following
-     *       wildcard characters are supported: * (matches 0 or more characters) and ? (matches exactly 1
-     *       character).</p>
-     *          <p>If the same header appears multiple times in the request, we search them in order until a
-     *       match is found.</p>
-     *          <p>If you specify multiple strings, the condition is satisfied if one of the strings matches
-     *       the value of the HTTP header. To require that all of the strings are a match, create one
-     *       condition per string.</p>
-     */
+    
     Values?: string[];
 }
 export declare namespace HttpHeaderConditionConfig {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: HttpHeaderConditionConfig) => any;
 }
-/**
- * <p>Information about an HTTP method condition.</p>
- *          <p>HTTP defines a set of request methods, also referred to as HTTP verbs. For more
- *       information, see the <a href="https://www.iana.org/assignments/http-methods/http-methods.xhtml">HTTP Method
- *         Registry</a>. You can also define custom HTTP methods.</p>
- */
+
 export interface HttpRequestMethodConditionConfig {
-    /**
-     * <p>The name of the request method. The maximum size is 40 characters. The allowed characters
-     *       are A-Z, hyphen (-), and underscore (_). The comparison is case sensitive. Wildcards are not
-     *       supported; therefore, the method name must be an exact match.</p>
-     *          <p>If you specify multiple strings, the condition is satisfied if one of the strings matches
-     *       the HTTP request method. We recommend that you route GET and HEAD requests in the same way,
-     *       because the response to a HEAD request may be cached.</p>
-     */
+    
     Values?: string[];
 }
 export declare namespace HttpRequestMethodConditionConfig {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: HttpRequestMethodConditionConfig) => any;
 }
-/**
- * <p>Information about a path pattern condition.</p>
- */
+
 export interface PathPatternConditionConfig {
-    /**
-     * <p>One or more path patterns to compare against the request URL. The maximum size of each
-     *       string is 128 characters. The comparison is case sensitive. The following wildcard characters
-     *       are supported: * (matches 0 or more characters) and ? (matches exactly 1 character).</p>
-     *          <p>If you specify multiple strings, the condition is satisfied if one of them matches the
-     *       request URL. The path pattern is compared only to the path of the URL, not to its query
-     *       string. To compare against the query string, use <a>QueryStringConditionConfig</a>.</p>
-     */
+    
     Values?: string[];
 }
 export declare namespace PathPatternConditionConfig {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: PathPatternConditionConfig) => any;
 }
-/**
- * <p>Information about a key/value pair.</p>
- */
+
 export interface QueryStringKeyValuePair {
-    /**
-     * <p>The key. You can omit the key.</p>
-     */
+    
     Key?: string;
-    /**
-     * <p>The value.</p>
-     */
+    
     Value?: string;
 }
 export declare namespace QueryStringKeyValuePair {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: QueryStringKeyValuePair) => any;
 }
-/**
- * <p>Information about a query string condition.</p>
- *          <p>The query string component of a URI starts after the first '?' character and is terminated
- *       by either a '#' character or the end of the URI. A typical query string contains key/value
- *       pairs separated by '&' characters. The allowed characters are specified by RFC 3986. Any
- *       character can be percentage encoded.</p>
- */
+
 export interface QueryStringConditionConfig {
-    /**
-     * <p>One or more key/value pairs or values to find in the query string. The maximum size of
-     *       each string is 128 characters. The comparison is case insensitive. The following wildcard
-     *       characters are supported: * (matches 0 or more characters) and ? (matches exactly 1
-     *       character). To search for a literal '*' or '?' character in a query string, you must escape
-     *       these characters in <code>Values</code> using a '\' character.</p>
-     *          <p>If you specify multiple key/value pairs or values, the condition is satisfied if one of
-     *       them is found in the query string.</p>
-     */
+    
     Values?: QueryStringKeyValuePair[];
 }
 export declare namespace QueryStringConditionConfig {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: QueryStringConditionConfig) => any;
 }
-/**
- * <p>Information about a source IP condition.</p>
- *          <p>You can use this condition to route based on the IP address of the source that connects to
- *       the load balancer. If a client is behind a proxy, this is the IP address of the proxy not the
- *       IP address of the client.</p>
- */
+
 export interface SourceIpConditionConfig {
-    /**
-     * <p>One or more source IP addresses, in CIDR format. You can use both IPv4 and IPv6 addresses.
-     *       Wildcards are not supported.</p>
-     *          <p>If you specify multiple addresses, the condition is satisfied if the source IP address of
-     *       the request matches one of the CIDR blocks. This condition is not satisfied by the addresses
-     *       in the X-Forwarded-For header. To search for addresses in the X-Forwarded-For header, use
-     *         <a>HttpHeaderConditionConfig</a>.</p>
-     */
+    
     Values?: string[];
 }
 export declare namespace SourceIpConditionConfig {
-    /**
-     * @internal
-     */
+    
     const filterSensitiveLog: (obj: SourceIpConditionConfig) => any;
 }
-/**
- * <p>Information about a condition for a rule.</p>
- *          <p>Each rule can optionally include up to one of each of the following conditions:
- *         <code>http-request-method</code>, <code>host-header</code>, <code>path-pattern</code>, and
- *         <code>source-ip</code>. Each rule can also optionally include one or more of each of the
- *       following conditions: <code>http-header</code> and <code>query-string</code>.</p>
- */
+
 export interface RuleCondition {
-    /**
-     * <p>The field in the HTTP request. The following are the possible values:</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>http-header</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>http-request-method</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>host-header</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>path-pattern</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>query-string</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>source-ip</code>
-     *                </p>
-     *             </li>
-     *          </ul>
-     */
+    
     Field?: string;
-    /**
-     * <p>The condition value. Specify only when <code>Field</code> is <code>host-header</code> or
-     *         <code>path-pattern</code>. Alternatively, to specify multiple host names or multiple path
-     *       patterns, use <code>HostHeaderConfig</code> or <code>PathPatternConfig</code>.</p>
-     *          <p>If <code>Field</code> is <code>host-header</code> and you are not using
-     *         <code>HostHeaderConfig</code>, you can specify a single host name (for example,
-     *       my.example.com) in <code>Values</code>. A host name is case insensitive, can be up to 128
-     *       characters in length, and can contain any of the following characters.</p>
-     *          <ul>
-     *             <li>
-     *                <p>A-Z, a-z, 0-9</p>
-     *             </li>
-     *             <li>
-     *                <p>- .</p>
-     *             </li>
-     *             <li>
-     *                <p>* (matches 0 or more characters)</p>
-     *             </li>
-     *             <li>
-     *                <p>? (matches exactly 1 character)</p>
-     *             </li>
-     *          </ul>
-     *          <p>If <code>Field</code> is <code>path-pattern</code> and you are not using
-     *         <code>PathPatternConfig</code>, you can specify a single path pattern (for example, /img/*)
-     *       in <code>Values</code>. A path pattern is case-sensitive, can be up to 128 characters in
-     *       length, and can contain any of the following characters.</p>
-     *          <ul>
-     *             <li>
-     *                <p>A-Z, a-z, 0-9</p>
-     *             </li>
-     *             <li>
-     *                <p>_ - . $ / ~ " ' @ : +</p>
-     *             </li>
-     *             <li>
-     *                <p>& (using &amp;)</p>
-     *             </li>
-     *             <li>
-     *                <p>* (matches 0 or more characters)</p>
-     *             </li>
-     *             <li>
-     *                <p>? (matches exactly 1 character)</p>
-     *             </li>
-     *          </ul>
-     */
-    Values?: string[];
-    /**
-     * <p>Information for a host header condition. Specify only when <code>Field</code> is
-     *         <code>host-header</code>.</p>
-     */
-    HostHeaderConfig?: HostHeaderConditionConfig;
-    /**
-     * <p>Information for a path pattern condition. Specify only when <code>Field</code> is
-     *         <code>path-pattern</code>.</p>
-     */
-    PathPatternConfig?: PathPatternConditionConfig;
-    /**
-     * <p>Information for an HTTP header condition. Specify only when <code>Field</code> is
-     *         <code>http-header</code>.</p>
-     */
-    HttpHeaderConfig?: HttpHeaderConditionConfig;
-    /**
-     * <p>Information for a query string condition. Specify only when <code>Field</code> is
-     *         <code>query-string</code>.</p>
-     */
-    QueryStringConfig?: QueryStringConditionConfig;
-    /**
-     * <p>Information for an HTTP method condition. Specify only when <code>Field</code> is
-     *         <code>http-request-method</code>.</p>
-     */
-    HttpRequestMethodConfig?: HttpRequestMethodConditionConfig;
-    /**
-     * <p>Information for a source IP condition. Specify only when <code>Field</code> is
-     *         <code>source-ip</code>.</p>
-     */
-    SourceIpConfig?: SourceIpConditionConfig;
-}
-export declare namespace RuleCondition {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: RuleCondition) => any;
-}
-export interface CreateRuleInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the listener.</p>
-     */
-    ListenerArn: string | undefined;
-    /**
-     * <p>The conditions.</p>
-     */
-    Conditions: RuleCondition[] | undefined;
-    /**
-     * <p>The rule priority. A listener can't have multiple rules with the same priority.</p>
-     */
-    Priority: number | undefined;
-    /**
-     * <p>The actions.</p>
-     */
-    Actions: Action[] | undefined;
-    /**
-     * <p>The tags to assign to the rule.</p>
-     */
-    Tags?: Tag[];
-}
-export declare namespace CreateRuleInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: CreateRuleInput) => any;
-}
-/**
- * <p>Information about a rule.</p>
- */
-export interface Rule {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the rule.</p>
-     */
-    RuleArn?: string;
-    /**
-     * <p>The priority.</p>
-     */
-    Priority?: string;
-    /**
-     * <p>The conditions. Each rule can include zero or one of the following conditions:
-     *         <code>http-request-method</code>, <code>host-header</code>, <code>path-pattern</code>, and
-     *         <code>source-ip</code>, and zero or more of the following conditions:
-     *         <code>http-header</code> and <code>query-string</code>.</p>
-     */
-    Conditions?: RuleCondition[];
-    /**
-     * <p>The actions. Each rule must include exactly one of the following types of actions:
-     *         <code>forward</code>, <code>redirect</code>, or <code>fixed-response</code>, and it must be
-     *       the last action to be performed.</p>
-     */
-    Actions?: Action[];
-    /**
-     * <p>Indicates whether this is the default rule.</p>
-     */
-    IsDefault?: boolean;
-}
-export declare namespace Rule {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: Rule) => any;
-}
-export interface CreateRuleOutput {
-    /**
-     * <p>Information about the rule.</p>
-     */
-    Rules?: Rule[];
-}
-export declare namespace CreateRuleOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: CreateRuleOutput) => any;
-}
-/**
- * <p>The specified priority is in use.</p>
- */
-export interface PriorityInUseException extends __SmithyException, $MetadataBearer {
-    name: "PriorityInUseException";
-    $fault: "client";
-    Message?: string;
-}
-export declare namespace PriorityInUseException {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: PriorityInUseException) => any;
-}
-/**
- * <p>You've reached the limit on the number of rules per load balancer.</p>
- */
-export interface TooManyRulesException extends __SmithyException, $MetadataBearer {
-    name: "TooManyRulesException";
-    $fault: "client";
-    Message?: string;
-}
-export declare namespace TooManyRulesException {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: TooManyRulesException) => any;
-}
-/**
- * <p>You've reached the limit on the number of target groups for your Amazon Web Services
- *       account.</p>
- */
-export interface TooManyTargetGroupsException extends __SmithyException, $MetadataBearer {
-    name: "TooManyTargetGroupsException";
-    $fault: "client";
-    Message?: string;
-}
-export declare namespace TooManyTargetGroupsException {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: TooManyTargetGroupsException) => any;
-}
-/**
- * <p>The codes to use when checking for a successful response from a target. If the protocol
- *       version is gRPC, these are gRPC codes. Otherwise, these are HTTP codes.</p>
- */
-export interface Matcher {
-    /**
-     * <p>For Application Load Balancers, you can specify values between 200 and 499, and the
-     *       default value is 200. You can specify multiple values (for example, "200,202") or a range of
-     *       values (for example, "200-299").</p>
-     *          <p>For Network Load Balancers and Gateway Load Balancers, this must be "200–399".</p>
-     */
-    HttpCode?: string;
-    /**
-     * <p>You can specify values between 0 and 99. You can specify multiple values (for example,
-     *       "0,1") or a range of values (for example, "0-5"). The default value is 12.</p>
-     */
-    GrpcCode?: string;
-}
-export declare namespace Matcher {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: Matcher) => any;
-}
-export declare enum TargetTypeEnum {
-    ALB = "alb",
-    INSTANCE = "instance",
-    IP = "ip",
-    LAMBDA = "lambda"
-}
-export interface CreateTargetGroupInput {
-    /**
-     * <p>The name of the target group.</p>
-     *          <p>This name must be unique per region per account, can have a maximum of 32 characters, must
-     *       contain only alphanumeric characters or hyphens, and must not begin or end with a
-     *       hyphen.</p>
-     */
-    Name: string | undefined;
-    /**
-     * <p>The protocol to use for routing traffic to the targets. For Application Load Balancers,
-     *       the supported protocols are HTTP and HTTPS. For Network Load Balancers, the supported
-     *       protocols are TCP, TLS, UDP, or TCP_UDP. For Gateway Load Balancers, the supported protocol is
-     *       GENEVE. A TCP_UDP listener must be associated with a TCP_UDP target group. If the target is a
-     *       Lambda function, this parameter does not apply.</p>
-     */
-    Protocol?: ProtocolEnum | string;
-    /**
-     * <p>[HTTP/HTTPS protocol] The protocol version. Specify <code>GRPC</code> to send requests to
-     *       targets using gRPC. Specify <code>HTTP2</code> to send requests to targets using HTTP/2. The
-     *       default is <code>HTTP1</code>, which sends requests to targets using HTTP/1.1.</p>
-     */
-    ProtocolVersion?: string;
-    /**
-     * <p>The port on which the targets receive traffic. This port is used unless you specify a port
-     *       override when registering the target. If the target is a Lambda function, this parameter does
-     *       not apply. If the protocol is GENEVE, the supported port is 6081.</p>
-     */
-    Port?: number;
-    /**
-     * <p>The identifier of the virtual private cloud (VPC). If the target is a Lambda function,
-     *       this parameter does not apply. Otherwise, this parameter is required.</p>
-     */
-    VpcId?: string;
-    /**
-     * <p>The protocol the load balancer uses when performing health checks on targets. For
-     *       Application Load Balancers, the default is HTTP. For Network Load Balancers and Gateway Load
-     *       Balancers, the default is TCP. The TCP protocol is not supported for health checks if the
-     *       protocol of the target group is HTTP or HTTPS. The GENEVE, TLS, UDP, and TCP_UDP protocols are
-     *       not supported for health checks.</p>
-     */
-    HealthCheckProtocol?: ProtocolEnum | string;
-    /**
-     * <p>The port the load balancer uses when performing health checks on targets. If the protocol
-     *       is HTTP, HTTPS, TCP, TLS, UDP, or TCP_UDP, the default is <code>traffic-port</code>, which is
-     *       the port on which each target receives traffic from the load balancer. If the protocol is
-     *       GENEVE, the default is port 80.</p>
-     */
-    HealthCheckPort?: string;
-    /**
-     * <p>Indicates whether health checks are enabled. If the target type is <code>lambda</code>,
-     *       health checks are disabled by default but can be enabled. If the target type is
-     *         <code>instance</code>, <code>ip</code>, or <code>alb</code>, health checks are always
-     *       enabled and cannot be disabled.</p>
-     */
-    HealthCheckEnabled?: boolean;
-    /**
-     * <p>[HTTP/HTTPS health checks] The destination for health checks on the targets.</p>
-     *          <p>[HTTP1 or HTTP2 protocol version] The ping path. The default is /.</p>
-     *          <p>[GRPC protocol version] The path of a custom health check method with the format
-     *       /package.service/method. The default is /Amazon Web Services.ALB/healthcheck.</p>
-     */
-    HealthCheckPath?: string;
-    /**
-     * <p>The approximate amount of time, in seconds, between health checks of an individual target.
-     *       If the target group protocol is TCP, TLS, UDP, or TCP_UDP, the supported values are 10 and 30
-     *       seconds. If the target group protocol is HTTP or HTTPS, the default is 30 seconds. If the
-     *       target group protocol is GENEVE, the default is 10 seconds. If the target type is
-     *         <code>lambda</code>, the default is 35 seconds.</p>
-     */
-    HealthCheckIntervalSeconds?: number;
-    /**
-     * <p>The amount of time, in seconds, during which no response from a target means a failed
-     *       health check. For target groups with a protocol of HTTP, HTTPS, or GENEVE, the default is 5
-     *       seconds. For target groups with a protocol of TCP or TLS, this value must be 6 seconds for
-     *       HTTP health checks and 10 seconds for TCP and HTTPS health checks. If the target type is
-     *         <code>lambda</code>, the default is 30 seconds.</p>
-     */
-    HealthCheckTimeoutSeconds?: number;
-    /**
-     * <p>The number of consecutive health checks successes required before considering an unhealthy
-     *       target healthy. For target groups with a protocol of HTTP or HTTPS, the default is 5. For
-     *       target groups with a protocol of TCP, TLS, or GENEVE, the default is 3. If the target type is
-     *         <code>lambda</code>, the default is 5.</p>
-     */
-    HealthyThresholdCount?: number;
-    /**
-     * <p>The number of consecutive health check failures required before considering a target
-     *       unhealthy. If the target group protocol is HTTP or HTTPS, the default is 2. If the target
-     *       group protocol is TCP or TLS, this value must be the same as the healthy threshold count. If
-     *       the target group protocol is GENEVE, the default is 3. If the target type is
-     *         <code>lambda</code>, the default is 2.</p>
-     */
-    UnhealthyThresholdCount?: number;
-    /**
-     * <p>[HTTP/HTTPS health checks] The HTTP or gRPC codes to use when checking for a successful
-     *       response from a target.</p>
-     */
-    Matcher?: Matcher;
-    /**
-     * <p>The type of target that you must specify when registering targets with this target group.
-     *       You can't specify targets for a target group using more than one target type.</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>instance</code> - Register targets by instance ID. This is the default
-     *           value.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>ip</code> - Register targets by IP address. You can specify IP addresses from
-     *           the subnets of the virtual private cloud (VPC) for the target group, the RFC 1918 range
-     *           (10.0.0.0/8, 172.16.0.0/12, and 192.168.0.0/16), and the RFC 6598 range (100.64.0.0/10).
-     *           You can't specify publicly routable IP addresses.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>lambda</code> - Register a single Lambda function as a target.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>alb</code> - Register a single Application Load Balancer as a target.</p>
-     *             </li>
-     *          </ul>
-     */
-    TargetType?: TargetTypeEnum | string;
-    /**
-     * <p>The tags to assign to the target group.</p>
-     */
-    Tags?: Tag[];
-}
-export declare namespace CreateTargetGroupInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: CreateTargetGroupInput) => any;
-}
-/**
- * <p>Information about a target group.</p>
- */
-export interface TargetGroup {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the target group.</p>
-     */
-    TargetGroupArn?: string;
-    /**
-     * <p>The name of the target group.</p>
-     */
-    TargetGroupName?: string;
-    /**
-     * <p>The protocol to use for routing traffic to the targets.</p>
-     */
-    Protocol?: ProtocolEnum | string;
-    /**
-     * <p>The port on which the targets are listening. Not used if the target is a Lambda
-     *       function.</p>
-     */
-    Port?: number;
-    /**
-     * <p>The ID of the VPC for the targets.</p>
-     */
-    VpcId?: string;
-    /**
-     * <p>The protocol to use to connect with the target. The GENEVE, TLS, UDP, and TCP_UDP
-     *       protocols are not supported for health checks.</p>
-     */
-    HealthCheckProtocol?: ProtocolEnum | string;
-    /**
-     * <p>The port to use to connect with the target.</p>
-     */
-    HealthCheckPort?: string;
-    /**
-     * <p>Indicates whether health checks are enabled.</p>
-     */
-    HealthCheckEnabled?: boolean;
-    /**
-     * <p>The approximate amount of time, in seconds, between health checks of an individual
-     *       target.</p>
-     */
-    HealthCheckIntervalSeconds?: number;
-    /**
-     * <p>The amount of time, in seconds, during which no response means a failed health
-     *       check.</p>
-     */
-    HealthCheckTimeoutSeconds?: number;
-    /**
-     * <p>The number of consecutive health checks successes required before considering an unhealthy
-     *       target healthy.</p>
-     */
-    HealthyThresholdCount?: number;
-    /**
-     * <p>The number of consecutive health check failures required before considering the target
-     *       unhealthy.</p>
-     */
-    UnhealthyThresholdCount?: number;
-    /**
-     * <p>The destination for health checks on the targets.</p>
-     */
-    HealthCheckPath?: string;
-    /**
-     * <p>The HTTP or gRPC codes to use when checking for a successful response from a
-     *       target.</p>
-     */
-    Matcher?: Matcher;
-    /**
-     * <p>The Amazon Resource Names (ARN) of the load balancers that route traffic to this target
-     *       group.</p>
-     */
-    LoadBalancerArns?: string[];
-    /**
-     * <p>The type of target that you must specify when registering targets with this target group.
-     *       The possible values are <code>instance</code> (register targets by instance ID),
-     *         <code>ip</code> (register targets by IP address), <code>lambda</code> (register a single
-     *       Lambda function as a target), or <code>alb</code> (register a single Application Load Balancer
-     *       as a target).</p>
-     */
-    TargetType?: TargetTypeEnum | string;
-    /**
-     * <p>[HTTP/HTTPS protocol] The protocol version. The possible values are <code>GRPC</code>,
-     *         <code>HTTP1</code>, and <code>HTTP2</code>.</p>
-     */
-    ProtocolVersion?: string;
-}
-export declare namespace TargetGroup {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: TargetGroup) => any;
-}
-export interface CreateTargetGroupOutput {
-    /**
-     * <p>Information about the target group.</p>
-     */
-    TargetGroups?: TargetGroup[];
-}
-export declare namespace CreateTargetGroupOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: CreateTargetGroupOutput) => any;
-}
-/**
- * <p>A target group with the specified name already exists.</p>
- */
-export interface DuplicateTargetGroupNameException extends __SmithyException, $MetadataBearer {
-    name: "DuplicateTargetGroupNameException";
-    $fault: "client";
-    Message?: string;
-}
-export declare namespace DuplicateTargetGroupNameException {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DuplicateTargetGroupNameException) => any;
-}
-export interface DeleteListenerInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the listener.</p>
-     */
-    ListenerArn: string | undefined;
-}
-export declare namespace DeleteListenerInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DeleteListenerInput) => any;
-}
-export interface DeleteListenerOutput {
-}
-export declare namespace DeleteListenerOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DeleteListenerOutput) => any;
-}
-export interface DeleteLoadBalancerInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the load balancer.</p>
-     */
-    LoadBalancerArn: string | undefined;
-}
-export declare namespace DeleteLoadBalancerInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DeleteLoadBalancerInput) => any;
-}
-export interface DeleteLoadBalancerOutput {
-}
-export declare namespace DeleteLoadBalancerOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DeleteLoadBalancerOutput) => any;
-}
-export interface DeleteRuleInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the rule.</p>
-     */
-    RuleArn: string | undefined;
-}
-export declare namespace DeleteRuleInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DeleteRuleInput) => any;
-}
-export interface DeleteRuleOutput {
-}
-export declare namespace DeleteRuleOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DeleteRuleOutput) => any;
-}
-export interface DeleteTargetGroupInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the target group.</p>
-     */
-    TargetGroupArn: string | undefined;
-}
-export declare namespace DeleteTargetGroupInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DeleteTargetGroupInput) => any;
-}
-export interface DeleteTargetGroupOutput {
-}
-export declare namespace DeleteTargetGroupOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DeleteTargetGroupOutput) => any;
-}
-/**
- * <p>Information about a target.</p>
- */
-export interface TargetDescription {
-    /**
-     * <p>The ID of the target. If the target type of the target group is <code>instance</code>,
-     *       specify an instance ID. If the target type is <code>ip</code>, specify an IP address. If the
-     *       target type is <code>lambda</code>, specify the ARN of the Lambda function. If the target type
-     *       is <code>alb</code>, specify the ARN of the Application Load Balancer target. </p>
-     */
-    Id: string | undefined;
-    /**
-     * <p>The port on which the target is listening. If the target group protocol is GENEVE, the
-     *       supported port is 6081. If the target type is <code>alb</code>, the targeted Application Load
-     *       Balancer must have at least one listener whose port matches the target group port. Not used if
-     *       the target is a Lambda function.</p>
-     */
-    Port?: number;
-    /**
-     * <p>An Availability Zone or <code>all</code>. This determines whether the target receives
-     *       traffic from the load balancer nodes in the specified Availability Zone or from all enabled
-     *       Availability Zones for the load balancer.</p>
-     *          <p>This parameter is not supported if the target type of the target group is
-     *       <code>instance</code> or <code>alb</code>.</p>
-     *          <p>If the target type is <code>ip</code> and the IP address is in a subnet of the VPC for the
-     *       target group, the Availability Zone is automatically detected and this parameter is optional.
-     *       If the IP address is outside the VPC, this parameter is required.</p>
-     *          <p>With an Application Load Balancer, if the target type is <code>ip</code> and the IP
-     *       address is outside the VPC for the target group, the only supported value is
-     *       <code>all</code>.</p>
-     *          <p>If the target type is <code>lambda</code>, this parameter is optional and the only
-     *       supported value is <code>all</code>.</p>
-     */
-    AvailabilityZone?: string;
-}
-export declare namespace TargetDescription {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: TargetDescription) => any;
-}
-export interface DeregisterTargetsInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the target group.</p>
-     */
-    TargetGroupArn: string | undefined;
-    /**
-     * <p>The targets. If you specified a port override when you registered a target, you must
-     *       specify both the target ID and the port when you deregister it.</p>
-     */
-    Targets: TargetDescription[] | undefined;
-}
-export declare namespace DeregisterTargetsInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DeregisterTargetsInput) => any;
-}
-export interface DeregisterTargetsOutput {
-}
-export declare namespace DeregisterTargetsOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DeregisterTargetsOutput) => any;
-}
-/**
- * <p>The specified target does not exist, is not in the same VPC as the target group, or has an
- *       unsupported instance type.</p>
- */
-export interface InvalidTargetException extends __SmithyException, $MetadataBearer {
-    name: "InvalidTargetException";
-    $fault: "client";
-    Message?: string;
-}
-export declare namespace InvalidTargetException {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: InvalidTargetException) => any;
-}
-export interface DescribeAccountLimitsInput {
-    /**
-     * <p>The marker for the next set of results. (You received this marker from a previous
-     *       call.)</p>
-     */
-    Marker?: string;
-    /**
-     * <p>The maximum number of results to return with this call.</p>
-     */
-    PageSize?: number;
-}
-export declare namespace DescribeAccountLimitsInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DescribeAccountLimitsInput) => any;
-}
-/**
- * <p>Information about an Elastic Load Balancing resource limit for your Amazon Web Services
- *       account.</p>
- */
-export interface Limit {
-    /**
-     * <p>The name of the limit. The possible values are:</p>
-     *          <ul>
-     *             <li>
-     *                <p>application-load-balancers</p>
-     *             </li>
-     *             <li>
-     *                <p>condition-values-per-alb-rule</p>
-     *             </li>
-     *             <li>
-     *                <p>condition-wildcards-per-alb-rule</p>
-     *             </li>
-     *             <li>
-     *                <p>gateway-load-balancers</p>
-     *             </li>
-     *             <li>
-     *                <p>gateway-load-balancers-per-vpc</p>
-     *             </li>
-     *             <li>
-     *                <p>geneve-target-groups</p>
-     *             </li>
-     *             <li>
-     *                <p>listeners-per-application-load-balancer</p>
-     *             </li>
-     *             <li>
-     *                <p>listeners-per-network-load-balancer</p>
-     *             </li>
-     *             <li>
-     *                <p>network-load-balancers</p>
-     *             </li>
-     *             <li>
-     *                <p>rules-per-application-load-balancer</p>
-     *             </li>
-     *             <li>
-     *                <p>target-groups</p>
-     *             </li>
-     *             <li>
-     *                <p>target-groups-per-action-on-application-load-balancer</p>
-     *             </li>
-     *             <li>
-     *                <p>target-groups-per-action-on-network-load-balancer</p>
-     *             </li>
-     *             <li>
-     *                <p>target-groups-per-application-load-balancer</p>
-     *             </li>
-     *             <li>
-     *                <p>targets-per-application-load-balancer</p>
-     *             </li>
-     *             <li>
-     *                <p>targets-per-availability-zone-per-gateway-load-balancer</p>
-     *             </li>
-     *             <li>
-     *                <p>targets-per-availability-zone-per-network-load-balancer</p>
-     *             </li>
-     *             <li>
-     *                <p>targets-per-network-load-balancer</p>
-     *             </li>
-     *          </ul>
-     */
-    Name?: string;
-    /**
-     * <p>The maximum value of the limit.</p>
-     */
-    Max?: string;
-}
-export declare namespace Limit {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: Limit) => any;
-}
-export interface DescribeAccountLimitsOutput {
-    /**
-     * <p>Information about the limits.</p>
-     */
-    Limits?: Limit[];
-    /**
-     * <p>If there are additional results, this is the marker for the next set of results.
-     *       Otherwise, this is null.</p>
-     */
-    NextMarker?: string;
-}
-export declare namespace DescribeAccountLimitsOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DescribeAccountLimitsOutput) => any;
-}
-export interface DescribeListenerCertificatesInput {
-    /**
-     * <p>The Amazon Resource Names (ARN) of the listener.</p>
-     */
-    ListenerArn: string | undefined;
-    /**
-     * <p>The marker for the next set of results. (You received this marker from a previous
-     *       call.)</p>
-     */
-    Marker?: string;
-    /**
-     * <p>The maximum number of results to return with this call.</p>
-     */
-    PageSize?: number;
-}
-export declare namespace DescribeListenerCertificatesInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DescribeListenerCertificatesInput) => any;
-}
-export interface DescribeListenerCertificatesOutput {
-    /**
-     * <p>Information about the certificates.</p>
-     */
-    Certificates?: Certificate[];
-    /**
-     * <p>If there are additional results, this is the marker for the next set of results.
-     *       Otherwise, this is null.</p>
-     */
-    NextMarker?: string;
-}
-export declare namespace DescribeListenerCertificatesOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DescribeListenerCertificatesOutput) => any;
-}
-export interface DescribeListenersInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the load balancer.</p>
-     */
-    LoadBalancerArn?: string;
-    /**
-     * <p>The Amazon Resource Names (ARN) of the listeners.</p>
-     */
-    ListenerArns?: string[];
-    /**
-     * <p>The marker for the next set of results. (You received this marker from a previous
-     *       call.)</p>
-     */
-    Marker?: string;
-    /**
-     * <p>The maximum number of results to return with this call.</p>
-     */
-    PageSize?: number;
-}
-export declare namespace DescribeListenersInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DescribeListenersInput) => any;
-}
-export interface DescribeListenersOutput {
-    /**
-     * <p>Information about the listeners.</p>
-     */
-    Listeners?: Listener[];
-    /**
-     * <p>If there are additional results, this is the marker for the next set of results.
-     *       Otherwise, this is null.</p>
-     */
-    NextMarker?: string;
-}
-export declare namespace DescribeListenersOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DescribeListenersOutput) => any;
-}
-export interface DescribeLoadBalancerAttributesInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the load balancer.</p>
-     */
-    LoadBalancerArn: string | undefined;
-}
-export declare namespace DescribeLoadBalancerAttributesInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DescribeLoadBalancerAttributesInput) => any;
-}
-/**
- * <p>Information about a load balancer attribute.</p>
- */
-export interface LoadBalancerAttribute {
-    /**
-     * <p>The name of the attribute.</p>
-     *
-     *          <p>The following attribute is supported by all load balancers:</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>deletion_protection.enabled</code> - Indicates whether deletion protection is
-     *           enabled. The value is <code>true</code> or <code>false</code>. The default is
-     *             <code>false</code>.</p>
-     *             </li>
-     *          </ul>
-     *
-     *          <p>The following attributes are supported by both Application Load Balancers and Network Load
-     *       Balancers:</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>access_logs.s3.enabled</code> - Indicates whether access logs are enabled. The
-     *           value is <code>true</code> or <code>false</code>. The default is
-     *           <code>false</code>.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>access_logs.s3.bucket</code> - The name of the S3 bucket for the access logs.
-     *           This attribute is required if access logs are enabled. The bucket must exist in the same
-     *           region as the load balancer and have a bucket policy that grants Elastic Load Balancing
-     *           permissions to write to the bucket.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>access_logs.s3.prefix</code> - The prefix for the location in the S3 bucket for the
-     *           access logs.</p>
-     *             </li>
-     *          </ul>
-     *
-     *          <p>The following attributes are supported by only Application Load Balancers:</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>idle_timeout.timeout_seconds</code> - The idle timeout value, in seconds. The
-     *           valid range is 1-4000 seconds. The default is 60 seconds.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>routing.http.desync_mitigation_mode</code> - Determines how the load balancer
-     *           handles requests that might pose a security risk to your application. The possible values
-     *           are <code>monitor</code>, <code>defensive</code>, and <code>strictest</code>. The default
-     *           is <code>defensive</code>.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>routing.http.drop_invalid_header_fields.enabled</code> - Indicates whether HTTP
-     *           headers with invalid header fields are removed by the load balancer (<code>true</code>) or
-     *           routed to targets (<code>false</code>). The default is <code>false</code>.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>routing.http.x_amzn_tls_version_and_cipher_suite.enabled</code> - Indicates whether the two headers (<code>x-amzn-tls-version</code> and
-     *           <code>x-amzn-tls-cipher-suite</code>), which contain information about
-     *           the negotiated TLS version and cipher suite, are added to the client request
-     *           before sending it to the target. The <code>x-amzn-tls-version</code> header
-     *           has information about the TLS protocol version negotiated with the client,
-     *           and the <code>x-amzn-tls-cipher-suite</code> header has information about
-     *           the cipher suite negotiated with the client. Both headers are in OpenSSL
-     *           format. The possible values for the attribute are <code>true</code> and
-     *           <code>false</code>. The default is <code>false</code>.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>routing.http.xff_client_port.enabled</code> - Indicates whether the
-     *           <code>X-Forwarded-For</code> header should preserve the source port that the client used
-     *           to connect to the load balancer. The possible values are <code>true</code> and
-     *           <code>false</code>. The default is <code>false</code>.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>routing.http2.enabled</code> - Indicates whether HTTP/2 is enabled. The possible
-     *           values are <code>true</code> and <code>false</code>. The default is <code>true</code>.
-     *           Elastic Load Balancing requires that message header names contain only alphanumeric
-     *           characters and hyphens.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>waf.fail_open.enabled</code> - Indicates whether to allow a WAF-enabled load
-     *           balancer to route requests to targets if it is unable to forward the request to Amazon Web Services WAF. The possible values are <code>true</code> and <code>false</code>. The
-     *           default is <code>false</code>.</p>
-     *             </li>
-     *          </ul>
-     *
-     *          <p>The following attribute is supported by Network Load Balancers and Gateway Load
-     *       Balancers:</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>load_balancing.cross_zone.enabled</code> - Indicates whether cross-zone load
-     *           balancing is enabled. The possible values are <code>true</code> and <code>false</code>.
-     *           The default is <code>false</code>.</p>
-     *             </li>
-     *          </ul>
-     */
-    Key?: string;
-    /**
-     * <p>The value of the attribute.</p>
-     */
-    Value?: string;
-}
-export declare namespace LoadBalancerAttribute {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: LoadBalancerAttribute) => any;
-}
-export interface DescribeLoadBalancerAttributesOutput {
-    /**
-     * <p>Information about the load balancer attributes.</p>
-     */
-    Attributes?: LoadBalancerAttribute[];
-}
-export declare namespace DescribeLoadBalancerAttributesOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DescribeLoadBalancerAttributesOutput) => any;
-}
-export interface DescribeLoadBalancersInput {
-    /**
-     * <p>The Amazon Resource Names (ARN) of the load balancers. You can specify up to 20 load
-     *       balancers in a single call.</p>
-     */
-    LoadBalancerArns?: string[];
-    /**
-     * <p>The names of the load balancers.</p>
-     */
-    Names?: string[];
-    /**
-     * <p>The marker for the next set of results. (You received this marker from a previous
-     *       call.)</p>
-     */
-    Marker?: string;
-    /**
-     * <p>The maximum number of results to return with this call.</p>
-     */
-    PageSize?: number;
-}
-export declare namespace DescribeLoadBalancersInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DescribeLoadBalancersInput) => any;
-}
-export interface DescribeLoadBalancersOutput {
-    /**
-     * <p>Information about the load balancers.</p>
-     */
-    LoadBalancers?: LoadBalancer[];
-    /**
-     * <p>If there are additional results, this is the marker for the next set of results.
-     *       Otherwise, this is null.</p>
-     */
-    NextMarker?: string;
-}
-export declare namespace DescribeLoadBalancersOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DescribeLoadBalancersOutput) => any;
-}
-export interface DescribeRulesInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the listener.</p>
-     */
-    ListenerArn?: string;
-    /**
-     * <p>The Amazon Resource Names (ARN) of the rules.</p>
-     */
-    RuleArns?: string[];
-    /**
-     * <p>The marker for the next set of results. (You received this marker from a previous
-     *       call.)</p>
-     */
-    Marker?: string;
-    /**
-     * <p>The maximum number of results to return with this call.</p>
-     */
-    PageSize?: number;
-}
-export declare namespace DescribeRulesInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DescribeRulesInput) => any;
-}
-export interface DescribeRulesOutput {
-    /**
-     * <p>Information about the rules.</p>
-     */
-    Rules?: Rule[];
-    /**
-     * <p>If there are additional results, this is the marker for the next set of results.
-     *       Otherwise, this is null.</p>
-     */
-    NextMarker?: string;
-}
-export declare namespace DescribeRulesOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DescribeRulesOutput) => any;
-}
-export interface DescribeSSLPoliciesInput {
-    /**
-     * <p>The names of the policies.</p>
-     */
-    Names?: string[];
-    /**
-     * <p>The marker for the next set of results. (You received this marker from a previous
-     *       call.)</p>
-     */
-    Marker?: string;
-    /**
-     * <p>The maximum number of results to return with this call.</p>
-     */
-    PageSize?: number;
-}
-export declare namespace DescribeSSLPoliciesInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DescribeSSLPoliciesInput) => any;
-}
-/**
- * <p>Information about a policy used for SSL negotiation.</p>
- */
-export interface SslPolicy {
-    /**
-     * <p>The protocols.</p>
-     */
-    SslProtocols?: string[];
-    /**
-     * <p>The ciphers.</p>
-     */
-    Ciphers?: Cipher[];
-    /**
-     * <p>The name of the policy.</p>
-     */
-    Name?: string;
-}
-export declare namespace SslPolicy {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: SslPolicy) => any;
-}
-export interface DescribeSSLPoliciesOutput {
-    /**
-     * <p>Information about the security policies.</p>
-     */
-    SslPolicies?: SslPolicy[];
-    /**
-     * <p>If there are additional results, this is the marker for the next set of results.
-     *       Otherwise, this is null.</p>
-     */
-    NextMarker?: string;
-}
-export declare namespace DescribeSSLPoliciesOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DescribeSSLPoliciesOutput) => any;
-}
-export interface DescribeTagsInput {
-    /**
-     * <p>The Amazon Resource Names (ARN) of the resources. You can specify up to 20 resources in a
-     *       single call.</p>
-     */
-    ResourceArns: string[] | undefined;
-}
-export declare namespace DescribeTagsInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DescribeTagsInput) => any;
-}
-/**
- * <p>The tags associated with a resource.</p>
- */
-export interface TagDescription {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the resource.</p>
-     */
-    ResourceArn?: string;
-    /**
-     * <p>Information about the tags.</p>
-     */
-    Tags?: Tag[];
-}
-export declare namespace TagDescription {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: TagDescription) => any;
-}
-export interface DescribeTagsOutput {
-    /**
-     * <p>Information about the tags.</p>
-     */
-    TagDescriptions?: TagDescription[];
-}
-export declare namespace DescribeTagsOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DescribeTagsOutput) => any;
-}
-export interface DescribeTargetGroupAttributesInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the target group.</p>
-     */
-    TargetGroupArn: string | undefined;
-}
-export declare namespace DescribeTargetGroupAttributesInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DescribeTargetGroupAttributesInput) => any;
-}
-/**
- * <p>Information about a target group attribute.</p>
- */
-export interface TargetGroupAttribute {
-    /**
-     * <p>The name of the attribute.</p>
-     *
-     *          <p>The following attribute is supported by all load balancers:</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>deregistration_delay.timeout_seconds</code> - The amount of time, in seconds,
-     *           for Elastic Load Balancing to wait before changing the state of a deregistering target
-     *           from <code>draining</code> to <code>unused</code>. The range is 0-3600 seconds. The
-     *           default value is 300 seconds. If the target is a Lambda function, this attribute is not
-     *           supported.</p>
-     *             </li>
-     *          </ul>
-     *
-     *          <p>The following attributes are supported by both Application Load Balancers and Network Load
-     *       Balancers:</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>stickiness.enabled</code> - Indicates whether sticky sessions are enabled. The
-     *           value is <code>true</code> or <code>false</code>. The default is
-     *           <code>false</code>.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>stickiness.type</code> - The type of sticky sessions. The possible values are
-     *             <code>lb_cookie</code> and <code>app_cookie</code> for Application Load Balancers or
-     *             <code>source_ip</code> for Network Load Balancers.</p>
-     *             </li>
-     *          </ul>
-     *
-     *          <p>The following attributes are supported only if the load balancer is an Application Load
-     *       Balancer and the target is an instance or an IP address:</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>load_balancing.algorithm.type</code> - The load balancing algorithm determines
-     *           how the load balancer selects targets when routing requests. The value is
-     *             <code>round_robin</code> or <code>least_outstanding_requests</code>. The default is
-     *             <code>round_robin</code>.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>slow_start.duration_seconds</code> - The time period, in seconds, during which a
-     *           newly registered target receives an increasing share of the traffic to the target group.
-     *           After this time period ends, the target receives its full share of traffic. The range is
-     *           30-900 seconds (15 minutes). The default is 0 seconds (disabled).</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>stickiness.app_cookie.cookie_name</code> - Indicates the name of the
-     *           application-based cookie. Names that start with the following prefixes are not allowed:
-     *             <code>AWSALB</code>, <code>AWSALBAPP</code>, and <code>AWSALBTG</code>; they're reserved
-     *           for use by the load balancer.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>stickiness.app_cookie.duration_seconds</code> - The time period, in seconds,
-     *           during which requests from a client should be routed to the same target. After this time
-     *           period expires, the application-based cookie is considered stale. The range is 1 second to
-     *           1 week (604800 seconds). The default value is 1 day (86400 seconds).</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>stickiness.lb_cookie.duration_seconds</code> - The time period, in seconds,
-     *           during which requests from a client should be routed to the same target. After this time
-     *           period expires, the load balancer-generated cookie is considered stale. The range is 1
-     *           second to 1 week (604800 seconds). The default value is 1 day (86400 seconds).</p>
-     *             </li>
-     *          </ul>
-     *
-     *          <p>The following attribute is supported only if the load balancer is an Application Load
-     *       Balancer and the target is a Lambda function:</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>lambda.multi_value_headers.enabled</code> - Indicates whether the request and
-     *           response headers that are exchanged between the load balancer and the Lambda function
-     *           include arrays of values or strings. The value is <code>true</code> or <code>false</code>.
-     *           The default is <code>false</code>. If the value is <code>false</code> and the request
-     *           contains a duplicate header field name or query parameter key, the load balancer uses the
-     *           last value sent by the client.</p>
-     *             </li>
-     *          </ul>
-     *
-     *          <p>The following attributes are supported only by Network Load Balancers:</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>deregistration_delay.connection_termination.enabled</code> - Indicates whether
-     *           the load balancer terminates connections at the end of the deregistration timeout. The
-     *           value is <code>true</code> or <code>false</code>. The default is
-     *           <code>false</code>.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>preserve_client_ip.enabled</code> - Indicates whether client IP preservation is
-     *           enabled. The value is <code>true</code> or <code>false</code>. The default is disabled if
-     *           the target group type is IP address and the target group protocol is TCP or TLS.
-     *           Otherwise, the default is enabled. Client IP preservation cannot be disabled for UDP and
-     *           TCP_UDP target groups.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>proxy_protocol_v2.enabled</code> - Indicates whether Proxy Protocol version 2 is
-     *           enabled. The value is <code>true</code> or <code>false</code>. The default is
-     *             <code>false</code>.</p>
-     *             </li>
-     *          </ul>
-     */
-    Key?: string;
-    /**
-     * <p>The value of the attribute.</p>
-     */
-    Value?: string;
-}
-export declare namespace TargetGroupAttribute {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: TargetGroupAttribute) => any;
-}
-export interface DescribeTargetGroupAttributesOutput {
-    /**
-     * <p>Information about the target group attributes</p>
-     */
-    Attributes?: TargetGroupAttribute[];
-}
-export declare namespace DescribeTargetGroupAttributesOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DescribeTargetGroupAttributesOutput) => any;
-}
-export interface DescribeTargetGroupsInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the load balancer.</p>
-     */
-    LoadBalancerArn?: string;
-    /**
-     * <p>The Amazon Resource Names (ARN) of the target groups.</p>
-     */
-    TargetGroupArns?: string[];
-    /**
-     * <p>The names of the target groups.</p>
-     */
-    Names?: string[];
-    /**
-     * <p>The marker for the next set of results. (You received this marker from a previous
-     *       call.)</p>
-     */
-    Marker?: string;
-    /**
-     * <p>The maximum number of results to return with this call.</p>
-     */
-    PageSize?: number;
-}
-export declare namespace DescribeTargetGroupsInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DescribeTargetGroupsInput) => any;
-}
-export interface DescribeTargetGroupsOutput {
-    /**
-     * <p>Information about the target groups.</p>
-     */
-    TargetGroups?: TargetGroup[];
-    /**
-     * <p>If there are additional results, this is the marker for the next set of results.
-     *       Otherwise, this is null.</p>
-     */
-    NextMarker?: string;
-}
-export declare namespace DescribeTargetGroupsOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DescribeTargetGroupsOutput) => any;
-}
-export interface DescribeTargetHealthInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the target group.</p>
-     */
-    TargetGroupArn: string | undefined;
-    /**
-     * <p>The targets.</p>
-     */
-    Targets?: TargetDescription[];
-}
-export declare namespace DescribeTargetHealthInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DescribeTargetHealthInput) => any;
-}
-export declare enum TargetHealthReasonEnum {
-    DEREGISTRATION_IN_PROGRESS = "Target.DeregistrationInProgress",
-    FAILED_HEALTH_CHECKS = "Target.FailedHealthChecks",
-    HEALTH_CHECK_DISABLED = "Target.HealthCheckDisabled",
-    INITIAL_HEALTH_CHECKING = "Elb.InitialHealthChecking",
-    INTERNAL_ERROR = "Elb.InternalError",
-    INVALID_STATE = "Target.InvalidState",
-    IP_UNUSABLE = "Target.IpUnusable",
-    NOT_IN_USE = "Target.NotInUse",
-    NOT_REGISTERED = "Target.NotRegistered",
-    REGISTRATION_IN_PROGRESS = "Elb.RegistrationInProgress",
-    RESPONSE_CODE_MISMATCH = "Target.ResponseCodeMismatch",
-    TIMEOUT = "Target.Timeout"
-}
-export declare enum TargetHealthStateEnum {
-    DRAINING = "draining",
-    HEALTHY = "healthy",
-    INITIAL = "initial",
-    UNAVAILABLE = "unavailable",
-    UNHEALTHY = "unhealthy",
-    UNUSED = "unused"
-}
-/**
- * <p>Information about the current health of a target.</p>
- */
-export interface TargetHealth {
-    /**
-     * <p>The state of the target.</p>
-     */
-    State?: TargetHealthStateEnum | string;
-    /**
-     * <p>The reason code.</p>
-     *
-     *          <p>If the target state is <code>healthy</code>, a reason code is not provided.</p>
-     *
-     *          <p>If the target state is <code>initial</code>, the reason code can be one of the following
-     *       values:</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>Elb.RegistrationInProgress</code> - The target is in the process of being registered
-     *           with the load balancer.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>Elb.InitialHealthChecking</code> - The load balancer is still sending the target the
-     *           minimum number of health checks required to determine its health status.</p>
-     *             </li>
-     *          </ul>
-     *
-     *          <p>If the target state is <code>unhealthy</code>, the reason code can be one of the following
-     *       values:</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>Target.ResponseCodeMismatch</code> - The health checks did not return an
-     *           expected HTTP code. Applies only to Application Load Balancers and Gateway Load
-     *           Balancers.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>Target.Timeout</code> - The health check requests timed out. Applies only to
-     *           Application Load Balancers and Gateway Load Balancers.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>Target.FailedHealthChecks</code> - The load balancer received an error while
-     *           establishing a connection to the target or the target response was malformed.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>Elb.InternalError</code> - The health checks failed due to an internal error.
-     *           Applies only to Application Load Balancers.</p>
-     *             </li>
-     *          </ul>
-     *
-     *          <p>If the target state is <code>unused</code>, the reason code can be one of the following
-     *       values:</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>Target.NotRegistered</code> - The target is not registered with the target
-     *           group.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>Target.NotInUse</code> - The target group is not used by any load balancer or
-     *           the target is in an Availability Zone that is not enabled for its load balancer.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>Target.InvalidState</code> - The target is in the stopped or terminated
-     *           state.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>Target.IpUnusable</code> - The target IP address is reserved for use by a load
-     *           balancer.</p>
-     *             </li>
-     *          </ul>
-     *
-     *          <p>If the target state is <code>draining</code>, the reason code can be the following
-     *       value:</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>Target.DeregistrationInProgress</code> - The target is in the process of being
-     *           deregistered and the deregistration delay period has not expired.</p>
-     *             </li>
-     *          </ul>
-     *
-     *          <p>If the target state is <code>unavailable</code>, the reason code can be the following
-     *       value:</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>Target.HealthCheckDisabled</code> - Health checks are disabled for the target
-     *           group. Applies only to Application Load Balancers.</p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>Elb.InternalError</code> - Target health is unavailable due to an internal
-     *           error. Applies only to Network Load Balancers.</p>
-     *             </li>
-     *          </ul>
-     */
-    Reason?: TargetHealthReasonEnum | string;
-    /**
-     * <p>A description of the target health that provides additional details. If the state is
-     *         <code>healthy</code>, a description is not provided.</p>
-     */
-    Description?: string;
-}
-export declare namespace TargetHealth {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: TargetHealth) => any;
-}
-/**
- * <p>Information about the health of a target.</p>
- */
-export interface TargetHealthDescription {
-    /**
-     * <p>The description of the target.</p>
-     */
-    Target?: TargetDescription;
-    /**
-     * <p>The port to use to connect with the target.</p>
-     */
-    HealthCheckPort?: string;
-    /**
-     * <p>The health information for the target.</p>
-     */
-    TargetHealth?: TargetHealth;
-}
-export declare namespace TargetHealthDescription {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: TargetHealthDescription) => any;
-}
-export interface DescribeTargetHealthOutput {
-    /**
-     * <p>Information about the health of the targets.</p>
-     */
-    TargetHealthDescriptions?: TargetHealthDescription[];
-}
-export declare namespace DescribeTargetHealthOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: DescribeTargetHealthOutput) => any;
-}
-/**
- * <p>The health of the specified targets could not be retrieved due to an internal
- *       error.</p>
- */
-export interface HealthUnavailableException extends __SmithyException, $MetadataBearer {
-    name: "HealthUnavailableException";
-    $fault: "server";
-    Message?: string;
-}
-export declare namespace HealthUnavailableException {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: HealthUnavailableException) => any;
-}
-export interface ModifyListenerInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the listener.</p>
-     */
-    ListenerArn: string | undefined;
-    /**
-     * <p>The port for connections from clients to the load balancer. You cannot specify a port for
-     *       a Gateway Load Balancer.</p>
-     */
-    Port?: number;
-    /**
-     * <p>The protocol for connections from clients to the load balancer. Application Load Balancers
-     *       support the HTTP and HTTPS protocols. Network Load Balancers support the TCP, TLS, UDP, and
-     *       TCP_UDP protocols. You can’t change the protocol to UDP or TCP_UDP if dual-stack mode is
-     *       enabled. You cannot specify a protocol for a Gateway Load Balancer.</p>
-     */
-    Protocol?: ProtocolEnum | string;
-    /**
-     * <p>[HTTPS and TLS listeners] The security policy that defines which protocols and ciphers are
-     *       supported.</p>
-     *          <p>For more information, see <a href="https://docs.aws.amazon.com/elasticloadbalancing/latest/application/create-https-listener.html#describe-ssl-policies">Security policies</a> in the <i>Application Load Balancers Guide</i> or
-     *         <a href="https://docs.aws.amazon.com/elasticloadbalancing/latest/network/create-tls-listener.html#describe-ssl-policies">Security policies</a> in the <i>Network Load Balancers Guide</i>.</p>
-     */
-    SslPolicy?: string;
-    /**
-     * <p>[HTTPS and TLS listeners] The default certificate for the listener. You must provide
-     *       exactly one certificate. Set <code>CertificateArn</code> to the certificate ARN but do not set
-     *         <code>IsDefault</code>.</p>
-     */
-    Certificates?: Certificate[];
-    /**
-     * <p>The actions for the default rule.</p>
-     */
-    DefaultActions?: Action[];
-    /**
-     * <p>[TLS listeners] The name of the Application-Layer Protocol Negotiation (ALPN) policy. You
-     *       can specify one policy name. The following are the possible values:</p>
-     *          <ul>
-     *             <li>
-     *                <p>
-     *                   <code>HTTP1Only</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>HTTP2Only</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>HTTP2Optional</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>HTTP2Preferred</code>
-     *                </p>
-     *             </li>
-     *             <li>
-     *                <p>
-     *                   <code>None</code>
-     *                </p>
-     *             </li>
-     *          </ul>
-     *          <p>For more information, see <a href="https://docs.aws.amazon.com/elasticloadbalancing/latest/network/create-tls-listener.html#alpn-policies">ALPN
-     *         policies</a> in the <i>Network Load Balancers Guide</i>.</p>
-     */
-    AlpnPolicy?: string[];
-}
-export declare namespace ModifyListenerInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: ModifyListenerInput) => any;
-}
-export interface ModifyListenerOutput {
-    /**
-     * <p>Information about the modified listener.</p>
-     */
-    Listeners?: Listener[];
-}
-export declare namespace ModifyListenerOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: ModifyListenerOutput) => any;
-}
-export interface ModifyLoadBalancerAttributesInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the load balancer.</p>
-     */
-    LoadBalancerArn: string | undefined;
-    /**
-     * <p>The load balancer attributes.</p>
-     */
-    Attributes: LoadBalancerAttribute[] | undefined;
-}
-export declare namespace ModifyLoadBalancerAttributesInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: ModifyLoadBalancerAttributesInput) => any;
-}
-export interface ModifyLoadBalancerAttributesOutput {
-    /**
-     * <p>Information about the load balancer attributes.</p>
-     */
-    Attributes?: LoadBalancerAttribute[];
-}
-export declare namespace ModifyLoadBalancerAttributesOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: ModifyLoadBalancerAttributesOutput) => any;
-}
-export interface ModifyRuleInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the rule.</p>
-     */
-    RuleArn: string | undefined;
-    /**
-     * <p>The conditions.</p>
-     */
-    Conditions?: RuleCondition[];
-    /**
-     * <p>The actions.</p>
-     */
-    Actions?: Action[];
-}
-export declare namespace ModifyRuleInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: ModifyRuleInput) => any;
-}
-export interface ModifyRuleOutput {
-    /**
-     * <p>Information about the modified rule.</p>
-     */
-    Rules?: Rule[];
-}
-export declare namespace ModifyRuleOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: ModifyRuleOutput) => any;
-}
-export interface ModifyTargetGroupInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the target group.</p>
-     */
-    TargetGroupArn: string | undefined;
-    /**
-     * <p>The protocol the load balancer uses when performing health checks on targets. For
-     *       Application Load Balancers, the default is HTTP. For Network Load Balancers and Gateway Load
-     *       Balancers, the default is TCP. The TCP protocol is not supported for health checks if the
-     *       protocol of the target group is HTTP or HTTPS. It is supported for health checks only if the
-     *       protocol of the target group is TCP, TLS, UDP, or TCP_UDP. The GENEVE, TLS, UDP, and TCP_UDP
-     *       protocols are not supported for health checks.</p>
-     *          <p>With Network Load Balancers, you can't modify this setting.</p>
-     */
-    HealthCheckProtocol?: ProtocolEnum | string;
-    /**
-     * <p>The port the load balancer uses when performing health checks on targets.</p>
-     */
-    HealthCheckPort?: string;
-    /**
-     * <p>[HTTP/HTTPS health checks] The destination for health checks on the targets.</p>
-     *          <p>[HTTP1 or HTTP2 protocol version] The ping path. The default is /.</p>
-     *          <p>[GRPC protocol version] The path of a custom health check method with the format
-     *       /package.service/method. The default is /Amazon Web Services.ALB/healthcheck.</p>
-     */
-    HealthCheckPath?: string;
-    /**
-     * <p>Indicates whether health checks are enabled.</p>
-     */
-    HealthCheckEnabled?: boolean;
-    /**
-     * <p>The approximate amount of time, in seconds, between health checks of an individual target.
-     *       For TCP health checks, the supported values are 10 or 30 seconds.</p>
-     *          <p>With Network Load Balancers, you can't modify this setting.</p>
-     */
-    HealthCheckIntervalSeconds?: number;
-    /**
-     * <p>[HTTP/HTTPS health checks] The amount of time, in seconds, during which no response means
-     *       a failed health check.</p>
-     *          <p>With Network Load Balancers, you can't modify this setting.</p>
-     */
-    HealthCheckTimeoutSeconds?: number;
-    /**
-     * <p>The number of consecutive health checks successes required before considering an unhealthy
-     *       target healthy.</p>
-     */
-    HealthyThresholdCount?: number;
-    /**
-     * <p>The number of consecutive health check failures required before considering the target
-     *       unhealthy. For target groups with a protocol of TCP or TLS, this value must be the same as the
-     *       healthy threshold count.</p>
-     */
-    UnhealthyThresholdCount?: number;
-    /**
-     * <p>[HTTP/HTTPS health checks] The HTTP or gRPC codes to use when checking for a successful
-     *       response from a target.</p>
-     *          <p>With Network Load Balancers, you can't modify this setting.</p>
-     */
-    Matcher?: Matcher;
-}
-export declare namespace ModifyTargetGroupInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: ModifyTargetGroupInput) => any;
-}
-export interface ModifyTargetGroupOutput {
-    /**
-     * <p>Information about the modified target group.</p>
-     */
-    TargetGroups?: TargetGroup[];
-}
-export declare namespace ModifyTargetGroupOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: ModifyTargetGroupOutput) => any;
-}
-export interface ModifyTargetGroupAttributesInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the target group.</p>
-     */
-    TargetGroupArn: string | undefined;
-    /**
-     * <p>The attributes.</p>
-     */
-    Attributes: TargetGroupAttribute[] | undefined;
-}
-export declare namespace ModifyTargetGroupAttributesInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: ModifyTargetGroupAttributesInput) => any;
-}
-export interface ModifyTargetGroupAttributesOutput {
-    /**
-     * <p>Information about the attributes.</p>
-     */
-    Attributes?: TargetGroupAttribute[];
-}
-export declare namespace ModifyTargetGroupAttributesOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: ModifyTargetGroupAttributesOutput) => any;
-}
-export interface RegisterTargetsInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the target group.</p>
-     */
-    TargetGroupArn: string | undefined;
-    /**
-     * <p>The targets.</p>
-     */
-    Targets: TargetDescription[] | undefined;
-}
-export declare namespace RegisterTargetsInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: RegisterTargetsInput) => any;
-}
-export interface RegisterTargetsOutput {
-}
-export declare namespace RegisterTargetsOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: RegisterTargetsOutput) => any;
-}
-export interface RemoveListenerCertificatesInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the listener.</p>
-     */
-    ListenerArn: string | undefined;
-    /**
-     * <p>The certificate to remove. You can specify one certificate per call. Set
-     *         <code>CertificateArn</code> to the certificate ARN but do not set
-     *       <code>IsDefault</code>.</p>
-     */
-    Certificates: Certificate[] | undefined;
-}
-export declare namespace RemoveListenerCertificatesInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: RemoveListenerCertificatesInput) => any;
-}
-export interface RemoveListenerCertificatesOutput {
-}
-export declare namespace RemoveListenerCertificatesOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: RemoveListenerCertificatesOutput) => any;
-}
-export interface RemoveTagsInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the resource.</p>
-     */
-    ResourceArns: string[] | undefined;
-    /**
-     * <p>The tag keys for the tags to remove.</p>
-     */
-    TagKeys: string[] | undefined;
-}
-export declare namespace RemoveTagsInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: RemoveTagsInput) => any;
-}
-export interface RemoveTagsOutput {
-}
-export declare namespace RemoveTagsOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: RemoveTagsOutput) => any;
-}
-export interface SetIpAddressTypeInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the load balancer.</p>
-     */
-    LoadBalancerArn: string | undefined;
-    /**
-     * <p>The IP address type. The possible values are <code>ipv4</code> (for IPv4 addresses) and
-     *         <code>dualstack</code> (for IPv4 and IPv6 addresses). Internal load balancers must use
-     *         <code>ipv4</code>. You can’t specify <code>dualstack</code> for a load balancer with a UDP
-     *       or TCP_UDP listener.</p>
-     */
-    IpAddressType: IpAddressType | string | undefined;
-}
-export declare namespace SetIpAddressTypeInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: SetIpAddressTypeInput) => any;
-}
-export interface SetIpAddressTypeOutput {
-    /**
-     * <p>The IP address type.</p>
-     */
-    IpAddressType?: IpAddressType | string;
-}
-export declare namespace SetIpAddressTypeOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: SetIpAddressTypeOutput) => any;
-}
-/**
- * <p>Information about the priorities for the rules for a listener.</p>
- */
-export interface RulePriorityPair {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the rule.</p>
-     */
-    RuleArn?: string;
-    /**
-     * <p>The rule priority.</p>
-     */
-    Priority?: number;
-}
-export declare namespace RulePriorityPair {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: RulePriorityPair) => any;
-}
-export interface SetRulePrioritiesInput {
-    /**
-     * <p>The rule priorities.</p>
-     */
-    RulePriorities: RulePriorityPair[] | undefined;
-}
-export declare namespace SetRulePrioritiesInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: SetRulePrioritiesInput) => any;
-}
-export interface SetRulePrioritiesOutput {
-    /**
-     * <p>Information about the rules.</p>
-     */
-    Rules?: Rule[];
-}
-export declare namespace SetRulePrioritiesOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: SetRulePrioritiesOutput) => any;
-}
-export interface SetSecurityGroupsInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the load balancer.</p>
-     */
-    LoadBalancerArn: string | undefined;
-    /**
-     * <p>The IDs of the security groups.</p>
-     */
-    SecurityGroups: string[] | undefined;
-}
-export declare namespace SetSecurityGroupsInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: SetSecurityGroupsInput) => any;
-}
-export interface SetSecurityGroupsOutput {
-    /**
-     * <p>The IDs of the security groups associated with the load balancer.</p>
-     */
-    SecurityGroupIds?: string[];
-}
-export declare namespace SetSecurityGroupsOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: SetSecurityGroupsOutput) => any;
-}
-export interface SetSubnetsInput {
-    /**
-     * <p>The Amazon Resource Name (ARN) of the load balancer.</p>
-     */
-    LoadBalancerArn: string | undefined;
-    /**
-     * <p>The IDs of the public subnets. You can specify only one subnet per Availability Zone. You
-     *       must specify either subnets or subnet mappings.</p>
-     *          <p>[Application Load Balancers] You must specify subnets from at least two Availability
-     *       Zones.</p>
-     *          <p>[Application Load Balancers on Outposts] You must specify one Outpost subnet.</p>
-     *          <p>[Application Load Balancers on Local Zones] You can specify subnets from one or more Local
-     *       Zones.</p>
-     *          <p>[Network Load Balancers] You can specify subnets from one or more Availability
-     *       Zones.</p>
-     */
-    Subnets?: string[];
-    /**
-     * <p>The IDs of the public subnets. You can specify only one subnet per Availability Zone. You
-     *       must specify either subnets or subnet mappings.</p>
-     *          <p>[Application Load Balancers] You must specify subnets from at least two Availability
-     *       Zones. You cannot specify Elastic IP addresses for your subnets.</p>
-     *          <p>[Application Load Balancers on Outposts] You must specify one Outpost subnet.</p>
-     *          <p>[Application Load Balancers on Local Zones] You can specify subnets from one or more Local
-     *       Zones.</p>
-     *          <p>[Network Load Balancers] You can specify subnets from one or more Availability Zones. You
-     *       can specify one Elastic IP address per subnet if you need static IP addresses for your
-     *       internet-facing load balancer. For internal load balancers, you can specify one private IP
-     *       address per subnet from the IPv4 range of the subnet. For internet-facing load balancer, you
-     *       can specify one IPv6 address per subnet.</p>
-     */
-    SubnetMappings?: SubnetMapping[];
-    /**
-     * <p>[Network Load Balancers] The type of IP addresses used by the subnets for your load
-     *       balancer. The possible values are <code>ipv4</code> (for IPv4 addresses) and
-     *         <code>dualstack</code> (for IPv4 and IPv6 addresses). You can’t specify
-     *         <code>dualstack</code> for a load balancer with a UDP or TCP_UDP listener. Internal load
-     *       balancers must use <code>ipv4</code>.</p>
-     */
-    IpAddressType?: IpAddressType | string;
-}
-export declare namespace SetSubnetsInput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: SetSubnetsInput) => any;
-}
-export interface SetSubnetsOutput {
-    /**
-     * <p>Information about the subnets.</p>
-     */
-    AvailabilityZones?: AvailabilityZone[];
-    /**
-     * <p>[Network Load Balancers] The IP address type.</p>
-     */
-    IpAddressType?: IpAddressType | string;
-}
-export declare namespace SetSubnetsOutput {
-    /**
-     * @internal
-     */
-    const filterSensitiveLog: (obj: SetSubnetsOutput) => any;
-}
+