wallet 0.0.2 → 0.0.3

data/README.rdoc

@@ -1 +1,56 @@
-Wallet is a rails gem that allows you to manage all of your action caching configuration in a single yaml file. It supports TTL.
+==Introduction
+
+Wallet is a rails gem that allows you to manage all of your action caching configuration in a single yaml file. It supports TTLs.
+
+==Motivation
+
+For a large project, it's nice from a systems administration point of view to be able to quickly manage caching in a single place.
+Having a central YAML file for managing action caching also opens up the possibility of creating backend web interfaces for your application
+that could allow site administrators of your app to manage the TTL's from anywhere. 
+
+
+==Installation
+
+To add wallet to your RAILS app, add a config.gem line like the following to the Rails::Initializer section of your environment.rb:
+
+  config.gem "wallet", :lib => 'wallet', :version => '>=0.0.2', :source => "http://gemcutter.org"
+
+Then install the missing gem: 
+
+  bash$ sudo rake gems:install
+
+
+==Usage
+
+Once it's installed, you can create a "wallet.yml" file in your RAILS_ROOT/config directory to manage action caching for your application. 
+Suppose you have a controller "ChannelsController" with actions "cartoon_network" and "current_tv". At it's simplest, you could put
+the following in your "wallet.yml":
+  
+  # RAILS_ROOT/config/wallet.yml
+
+  channels:
+    cartoon_network:
+    current_tv:
+
+Wallet would read this file and setup action caching for the cartoon_network and current_tv actions; it would default the TTL
+on those actions to 60 seconds. If you wanted a different default, you could add a special "default_ttl:" entry to your "wallet.yml":
+
+  # RAILS_ROOT/config/wallet.yml
+
+  default_ttl: 30 minutes
+
+  channels:
+    cartoon_network:
+    current_tv:
+
+Noticed that we simple specified "30 minutes". The format of the ttls is "\d\ (minutes?|days?|hours?)".
+
+Lastly, suppose you wanted current_tv to cache for 5 hours, but cartoon_network to still use the default:
+
+  # RAILS_ROOT/config/wallet.yml
+
+  default_ttl: 30 minutes
+
+  channels:
+    cartoon_network: 
+    current_tv: 5 hours

data/lib/wallet.rb

@@ -1,3 +1,2 @@
 require 'wallet/wallet'
-require 'wallet/action_controller'
 Wallet.new((File.open(RAILS_ROOT + "/config/wallet.yml") rescue "")) if defined?(RAILS_ROOT)

data/lib/wallet/wallet.rb

@@ -7,6 +7,8 @@ class Wallet
   # for an action that's not in the wallet. 
   class ActionNotCached < StandardError
   end
+  
+  class YamlError < StandardError; end
 
   class UnknownController < StandardError
   end
@@ -20,11 +22,11 @@ class Wallet
   # Then your yaml might be formatted like so:
   #   # /path/to/wallet.yml
   #   
-  #   default_ttl: 5.hours
+  #   default_ttl: 5 hours
   #
   #   pages:
   #     show: 
-  #     index: 20.minutes
+  #     index: 20 minutes
   #
   # That would result in the following values:
   #   irb> w = Wallet.new File.open("/path/to/wallet.yml")
@@ -46,7 +48,7 @@ class Wallet
   def initialize(config_yml="")
     yml = YAML.load config_yml rescue nil
     @config = yml || {}
-    @default_ttl = (eval(@config["default_ttl"]).to_i || 60) rescue 60
+    @default_ttl = @config["default_ttl"] ? convert_time(@config["default_ttl"]) : 60
     @config.delete "default_ttl"
     setup_action_caching
   end
@@ -80,13 +82,25 @@ class Wallet
     raise ActionNotCached.new("You asked for the TTL for the '#{action}' action in the '#{controller}' controller, but according to our wallet configuration, that action is not cached.") unless cached?(controller, action) 
     controller, action = stringify_params controller, action
     if @config[controller][action]
-      (eval(@config[controller][action]).to_i || @default_ttl) rescue @default_ttl
+      convert_time @config[controller][action]
     else
       @default_ttl
     end
   end
 
   private
+  def convert_time(time)
+    if !(time =~ /\d+(?:\ +|\.)(?:hours?|minutes?|days?)/)
+      raise YamlError.new(
+        "'#{time}' is not a valid time phrase. Valid phrases are a number followed by " +
+        "a space followed by 'hours' or 'minutes' or 'days' (or the singular versions of those)."
+      )
+    else
+      time = time.strip.gsub(/\ +/, '.')
+      eval time
+    end
+  end
+  
   def stringify_params(*args)
     args.map! {|a| a.to_s}
     return *args

data/spec/lib_specs/wallet_spec.rb

@@ -23,10 +23,14 @@ describe Wallet do
       wallet = Wallet.new "default_ttl: 5.hours"
       wallet.default_ttl.should == 5.hours.to_i
     end
+    
+    it "should set the default_ttl to 300 if the default_ttl is set to '5 hours' in the config yml" do
+      wallet = Wallet.new "default_ttl: 5 hours"
+      wallet.default_ttl.should == 5.hours.to_i
+    end
 
-    it "should set the default_ttl to 60 seconds if i make a mistake in my default_ttl entry in the config yml" do
-      wallet = Wallet.new "default_ttl: 5.hurs"
-      wallet.default_ttl.should == 60
+    it "should throw an exception if i make a mistake with my time format" do
+      proc {Wallet.new "default_ttl: 5.hurs"}.should raise_error(Wallet::YamlError)
     end
   end
 
@@ -53,17 +57,25 @@ describe Wallet do
 
   describe "Wallet::ttl" do
     before do
-      config_yml = "channels:\n  cartoon_network: 5.minute\n  current_tv: "
+      config_yml = "channels:\n  cartoon_network: 5 hours\n  current_tv:\n  hbo: 2.minutes\n  pbs: 60 days"
       @wallet = Wallet.new config_yml
     end
 
     it "should return 5 minutes for the channels:cartoon_network ttl" do
-      @wallet.ttl(:channels, :cartoon_network).should == 5.minutes.to_i
+      @wallet.ttl(:channels, :cartoon_network).should == 5.hours.to_i
     end
 
     it "should return the default ttl for the current_tv action" do
       @wallet.ttl(:channels, :current_tv).should == @wallet.default_ttl
     end
+    
+    it "should return 2 minutes for the channels:hbo ttl" do
+      @wallet.ttl(:channels, :hbo).should == 2.minutes.to_i
+    end
+    
+    it "should return 60 days for the pbs channel ttl" do
+      @wallet.ttl(:channels, :pbs).should == 60.days.to_i
+    end
 
     it "should raise a ActionNotCached error for the dne action" do
       proc {@wallet.ttl(:channels, :dne)}.should raise_error(Wallet::ActionNotCached)

data/spec/spec_helper.rb

@@ -1,3 +1,3 @@
 $LOAD_PATH << './lib'
-require 'activesupport'
+require 'active_support'
 require 'wallet'

metadata

@@ -1,7 +1,7 @@
 --- !ruby/object:Gem::Specification 
 name: wallet
 version: !ruby/object:Gem::Version 
-  version: 0.0.2
+  version: 0.0.3
 platform: ruby
 authors: 
 - Matt Parker
@@ -9,7 +9,7 @@ autorequire:
 bindir: bin
 cert_chain: []
 
-date: 2009-10-21 00:00:00 -04:00
+date: 2009-12-02 00:00:00 -05:00
 default_executable: 
 dependencies: 
 - !ruby/object:Gem::Dependency 
@@ -33,7 +33,6 @@ extra_rdoc_files:
 files: 
 - README.rdoc
 - lib/wallet.rb
-- lib/wallet/action_controller.rb
 - lib/wallet/wallet.rb
 has_rdoc: true
 homepage: http://github.com/moonmaster9000/wallet
@@ -66,20 +65,3 @@ summary: Centralized YAML configuration for action caching.
 test_files: 
 - spec/lib_specs/wallet_spec.rb
 - spec/spec_helper.rb
-- examples/tv/app/controllers/application_controller.rb
-- examples/tv/app/controllers/channels_controller.rb
-- examples/tv/app/helpers/application_helper.rb
-- examples/tv/config/boot.rb
-- examples/tv/config/environment.rb
-- examples/tv/config/environments/development.rb
-- examples/tv/config/environments/production.rb
-- examples/tv/config/environments/test.rb
-- examples/tv/config/initializers/backtrace_silencers.rb
-- examples/tv/config/initializers/inflections.rb
-- examples/tv/config/initializers/mime_types.rb
-- examples/tv/config/initializers/new_rails_defaults.rb
-- examples/tv/config/initializers/session_store.rb
-- examples/tv/config/routes.rb
-- examples/tv/lib/wallet.rb
-- examples/tv/test/performance/browsing_test.rb
-- examples/tv/test/test_helper.rb

data/examples/tv/app/controllers/application_controller.rb

@@ -1,10 +0,0 @@
-# Filters added to this controller apply to all controllers in the application.
-# Likewise, all the methods added will be available for all controllers.
-
-class ApplicationController < ActionController::Base
-  helper :all # include all helpers, all the time
-  protect_from_forgery # See ActionController::RequestForgeryProtection for details
-
-  # Scrub sensitive parameters from your log
-  # filter_parameter_logging :password
-end

data/examples/tv/app/controllers/channels_controller.rb

@@ -1,11 +0,0 @@
-class ChannelsController < ApplicationController
- 
-  caches_action :cartoon_network, :expires_in => 10.seconds 
-
-  def cartoon_network
-  end
-
-  def current
-  end
-
-end

data/examples/tv/app/helpers/application_helper.rb

@@ -1,3 +0,0 @@
-# Methods added to this helper will be available to all templates in the application.
-module ApplicationHelper
-end

data/examples/tv/config/boot.rb

@@ -1,110 +0,0 @@
-# Don't change this file!
-# Configure your app in config/environment.rb and config/environments/*.rb
-
-RAILS_ROOT = "#{File.dirname(__FILE__)}/.." unless defined?(RAILS_ROOT)
-
-module Rails
-  class << self
-    def boot!
-      unless booted?
-        preinitialize
-        pick_boot.run
-      end
-    end
-
-    def booted?
-      defined? Rails::Initializer
-    end
-
-    def pick_boot
-      (vendor_rails? ? VendorBoot : GemBoot).new
-    end
-
-    def vendor_rails?
-      File.exist?("#{RAILS_ROOT}/vendor/rails")
-    end
-
-    def preinitialize
-      load(preinitializer_path) if File.exist?(preinitializer_path)
-    end
-
-    def preinitializer_path
-      "#{RAILS_ROOT}/config/preinitializer.rb"
-    end
-  end
-
-  class Boot
-    def run
-      load_initializer
-      Rails::Initializer.run(:set_load_path)
-    end
-  end
-
-  class VendorBoot < Boot
-    def load_initializer
-      require "#{RAILS_ROOT}/vendor/rails/railties/lib/initializer"
-      Rails::Initializer.run(:install_gem_spec_stubs)
-      Rails::GemDependency.add_frozen_gem_path
-    end
-  end
-
-  class GemBoot < Boot
-    def load_initializer
-      self.class.load_rubygems
-      load_rails_gem
-      require 'initializer'
-    end
-
-    def load_rails_gem
-      if version = self.class.gem_version
-        gem 'rails', version
-      else
-        gem 'rails'
-      end
-    rescue Gem::LoadError => load_error
-      $stderr.puts %(Missing the Rails #{version} gem. Please `gem install -v=#{version} rails`, update your RAILS_GEM_VERSION setting in config/environment.rb for the Rails version you do have installed, or comment out RAILS_GEM_VERSION to use the latest version installed.)
-      exit 1
-    end
-
-    class << self
-      def rubygems_version
-        Gem::RubyGemsVersion rescue nil
-      end
-
-      def gem_version
-        if defined? RAILS_GEM_VERSION
-          RAILS_GEM_VERSION
-        elsif ENV.include?('RAILS_GEM_VERSION')
-          ENV['RAILS_GEM_VERSION']
-        else
-          parse_gem_version(read_environment_rb)
-        end
-      end
-
-      def load_rubygems
-        require 'rubygems'
-        min_version = '1.3.1'
-        unless rubygems_version >= min_version
-          $stderr.puts %Q(Rails requires RubyGems >= #{min_version} (you have #{rubygems_version}). Please `gem update --system` and try again.)
-          exit 1
-        end
-
-      rescue LoadError
-        $stderr.puts %Q(Rails requires RubyGems >= #{min_version}. Please install RubyGems and try again: http://rubygems.rubyforge.org)
-        exit 1
-      end
-
-      def parse_gem_version(text)
-        $1 if text =~ /^[^#]*RAILS_GEM_VERSION\s*=\s*["']([!~<>=]*\s*[\d.]+)["']/
-      end
-
-      private
-        def read_environment_rb
-          File.read("#{RAILS_ROOT}/config/environment.rb")
-        end
-    end
-  end
-end
-
-# All that for this:
-Rails.boot!

data/examples/tv/config/environment.rb

@@ -1,12 +0,0 @@
-# Be sure to restart your server when you modify this file
-
-# Specifies gem version of Rails to use when vendor/rails is not present
-RAILS_GEM_VERSION = '2.3.3' unless defined? RAILS_GEM_VERSION
-
-# Bootstrap the Rails environment, frameworks, and default configuration
-require File.join(File.dirname(__FILE__), 'boot')
-
-Rails::Initializer.run do |config|
-  config.gem "wallet", :lib => 'wallet', :version => '>=0.0.1', :source => "http://gemcutter.org"
-  config.time_zone = 'UTC'
-end

data/examples/tv/config/environments/development.rb

@@ -1,17 +0,0 @@
-# Settings specified here will take precedence over those in config/environment.rb
-
-# In the development environment your application's code is reloaded on
-# every request.  This slows down response time but is perfect for development
-# since you don't have to restart the webserver when you make code changes.
-config.cache_classes = false
-
-# Log error messages when you accidentally call methods on nil.
-config.whiny_nils = true
-
-# Show full error reports and disable caching
-config.action_controller.consider_all_requests_local = true
-config.action_view.debug_rjs                         = true
-config.action_controller.perform_caching             = false
-
-# Don't care if the mailer can't send
-config.action_mailer.raise_delivery_errors = false

data/examples/tv/config/environments/production.rb

@@ -1,28 +0,0 @@
-# Settings specified here will take precedence over those in config/environment.rb
-
-# The production environment is meant for finished, "live" apps.
-# Code is not reloaded between requests
-config.cache_classes = true
-
-# Full error reports are disabled and caching is turned on
-config.action_controller.consider_all_requests_local = false
-config.action_controller.perform_caching             = true
-config.action_view.cache_template_loading            = true
-
-# See everything in the log (default is :info)
-# config.log_level = :debug
-
-# Use a different logger for distributed setups
-# config.logger = SyslogLogger.new
-
-# Use a different cache store in production
-config.cache_store = :mem_cache_store
-
-# Enable serving of images, stylesheets, and javascripts from an asset server
-# config.action_controller.asset_host = "http://assets.example.com"
-
-# Disable delivery errors, bad email addresses will be ignored
-# config.action_mailer.raise_delivery_errors = false
-
-# Enable threaded mode
-# config.threadsafe!

data/examples/tv/config/environments/test.rb

@@ -1,28 +0,0 @@
-# Settings specified here will take precedence over those in config/environment.rb
-
-# The test environment is used exclusively to run your application's
-# test suite.  You never need to work with it otherwise.  Remember that
-# your test database is "scratch space" for the test suite and is wiped
-# and recreated between test runs.  Don't rely on the data there!
-config.cache_classes = true
-
-# Log error messages when you accidentally call methods on nil.
-config.whiny_nils = true
-
-# Show full error reports and disable caching
-config.action_controller.consider_all_requests_local = true
-config.action_controller.perform_caching             = false
-config.action_view.cache_template_loading            = true
-
-# Disable request forgery protection in test environment
-config.action_controller.allow_forgery_protection    = false
-
-# Tell Action Mailer not to deliver emails to the real world.
-# The :test delivery method accumulates sent emails in the
-# ActionMailer::Base.deliveries array.
-config.action_mailer.delivery_method = :test
-
-# Use SQL instead of Active Record's schema dumper when creating the test database.
-# This is necessary if your schema can't be completely dumped by the schema dumper,
-# like if you have constraints or database-specific column types
-# config.active_record.schema_format = :sql

data/examples/tv/config/initializers/backtrace_silencers.rb

@@ -1,7 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# You can add backtrace silencers for libraries that you're using but don't wish to see in your backtraces.
-# Rails.backtrace_cleaner.add_silencer { |line| line =~ /my_noisy_library/ }
-
-# You can also remove all the silencers if you're trying do debug a problem that might steem from framework code.
-# Rails.backtrace_cleaner.remove_silencers!

data/examples/tv/config/initializers/inflections.rb

@@ -1,10 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Add new inflection rules using the following format 
-# (all these examples are active by default):
-# ActiveSupport::Inflector.inflections do |inflect|
-#   inflect.plural /^(ox)$/i, '\1en'
-#   inflect.singular /^(ox)en/i, '\1'
-#   inflect.irregular 'person', 'people'
-#   inflect.uncountable %w( fish sheep )
-# end

data/examples/tv/config/initializers/mime_types.rb

@@ -1,5 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Add new mime types for use in respond_to blocks:
-# Mime::Type.register "text/richtext", :rtf
-# Mime::Type.register_alias "text/html", :iphone

data/examples/tv/config/initializers/new_rails_defaults.rb

@@ -1,19 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# These settings change the behavior of Rails 2 apps and will be defaults
-# for Rails 3. You can remove this initializer when Rails 3 is released.
-
-if defined?(ActiveRecord)
-  # Include Active Record class name as root for JSON serialized output.
-  ActiveRecord::Base.include_root_in_json = true
-
-  # Store the full class name (including module namespace) in STI type column.
-  ActiveRecord::Base.store_full_sti_class = true
-end
-
-# Use ISO 8601 format for JSON serialized times and dates.
-ActiveSupport.use_standard_json_time_format = true
-
-# Don't escape HTML entities in JSON, leave that for the #json_escape helper.
-# if you're including raw json in an HTML page.
-ActiveSupport.escape_html_entities_in_json = false

data/examples/tv/config/initializers/session_store.rb

@@ -1,15 +0,0 @@
-# Be sure to restart your server when you modify this file.
-
-# Your secret key for verifying cookie session data integrity.
-# If you change this key, all old sessions will become invalid!
-# Make sure the secret is at least 30 characters and all random, 
-# no regular words or you'll be exposed to dictionary attacks.
-ActionController::Base.session = {
-  :key         => '_tv_session',
-  :secret      => '91c1045d111179c9c4f12bea2f0539bd547c4e313f9ac11d0b737b60257666d0be6aea4542e620bc51d55635e98d2e1b2c46bdb308ffe3b73fd8fe8d59a811bc'
-}
-
-# Use the database for sessions instead of the cookie-based default,
-# which shouldn't be used to store highly confidential information
-# (create the session table with "rake db:sessions:create")
-# ActionController::Base.session_store = :active_record_store

data/examples/tv/config/routes.rb

@@ -1,43 +0,0 @@
-ActionController::Routing::Routes.draw do |map|
-  # The priority is based upon order of creation: first created -> highest priority.
-
-  # Sample of regular route:
-  #   map.connect 'products/:id', :controller => 'catalog', :action => 'view'
-  # Keep in mind you can assign values other than :controller and :action
-
-  # Sample of named route:
-  #   map.purchase 'products/:id/purchase', :controller => 'catalog', :action => 'purchase'
-  # This route can be invoked with purchase_url(:id => product.id)
-
-  # Sample resource route (maps HTTP verbs to controller actions automatically):
-  #   map.resources :products
-
-  # Sample resource route with options:
-  #   map.resources :products, :member => { :short => :get, :toggle => :post }, :collection => { :sold => :get }
-
-  # Sample resource route with sub-resources:
-  #   map.resources :products, :has_many => [ :comments, :sales ], :has_one => :seller
-  
-  # Sample resource route with more complex sub-resources
-  #   map.resources :products do |products|
-  #     products.resources :comments
-  #     products.resources :sales, :collection => { :recent => :get }
-  #   end
-
-  # Sample resource route within a namespace:
-  #   map.namespace :admin do |admin|
-  #     # Directs /admin/products/* to Admin::ProductsController (app/controllers/admin/products_controller.rb)
-  #     admin.resources :products
-  #   end
-
-  # You can have the root of your site routed with map.root -- just remember to delete public/index.html.
-  # map.root :controller => "welcome"
-
-  # See how all your routes lay out with "rake routes"
-
-  # Install the default routes as the lowest priority.
-  # Note: These default routes make all actions in every controller accessible via GET requests. You should
-  # consider removing or commenting them out if you're using named routes and resources.
-  map.connect ':controller/:action/:id'
-  map.connect ':controller/:action/:id.:format'
-end

data/examples/tv/lib/wallet.rb

@@ -1,123 +0,0 @@
-# Author::    Matt Parker  (mailto:moonmaster9000@gmail.com)
-# License::   Distributes under the same terms as Ruby
-
-class Wallet
-  
-  # This error gets thrown whenever you attempt to retreive a TTL
-  # for an action that's not in the wallet. 
-  class ActionNotCached < Exception
-  end
-
-  attr_reader :config #:nodoc:
-  attr_reader :default_ttl #:nodoc:
-
-  # Pass in a yaml string to this method that represents your configuration. 
-  # Let's assume you have a PagesController with a show action and an index action, 
-  # and let's suppose you would like wallet to default your action cache ttl's to 5 hours. 
-  # Then your yaml might be formatted like so:
-  #   # /path/to/wallet.yml
-  #   
-  #   default_ttl: 5.hours
-  #
-  #   pages:
-  #     show: 
-  #     index: 20.minutes
-  #
-  # That would result in the following values:
-  #   irb> w = Wallet.new File.open("/path/to/wallet.yml")
-  #   irb> w.cached? :pages, :show
-  #   => true
-  #   irb> w.cached? :pages, :index
-  #   => true
-  #   irb> w.cached? :pages, :new
-  #   => false
-  #   irb> w.ttl :pages, :show
-  #   => 300
-  #   irb> w.ttl :pages, :index
-  #   => 1200
-  #   irb> w.ttl :pages, :new
-  #   Wallet::ActionNotCached: You asked for the TTL for the 'new' action in the 'pages' controller, 
-  #   but according to our wallet configuration, that action is not cached.
-  #       from ./lib/wallet/wallet.rb:54:in `ttl'
-  #       from (irb):6
-  def initialize(config_yml="")
-    yml = YAML.load config_yml rescue nil
-    @config = yml || {}
-    @default_ttl = (eval(@config["default_ttl"]).to_i || 60) rescue 60
-    setup_action_caching
-  end
-
-  # Returns true or false based on whether or not a controller action is configured for caching in the wallet
-  #   irb> w = Wallet.new "pages:\n  show:"
-  #   irb> w.cached? :pages, :show
-  #   => true
-  def cached?(controller, action)
-    controller, action = stringify_params controller, action
-    @config.has_key?(controller) && 
-      @config[controller].respond_to?(:has_key?) && 
-      @config[controller].has_key?(action)
-  end
-
-  def cached_actions(controller)
-    @config[controller] ? @config[controller].keys : []
-  end
-
-  # Returns the value of the ttl for a controller / action. Throws an exception if the controller/action isn't setup
-  # for caching. 
-  #   irb> w = Wallet.new "pages:\n  show:"
-  #   irb> w.cached? :pages, :show
-  #   => true
-  #   irb> w.ttl :pages, :new
-  #   Wallet::ActionNotCached: You asked for the TTL for the 'new' action in the 'pages' controller, 
-  #   but according to our wallet configuration, that action is not cached.
-  #       from ./lib/wallet/wallet.rb:54:in `ttl'
-  #       from (irb):6
-  def ttl(controller, action)
-    raise ActionNotCached.new("You asked for the TTL for the '#{action}' action in the '#{controller}' controller, but according to our wallet configuration, that action is not cached.") unless cached?(controller, action) 
-    controller, action = stringify_params controller, action
-    if @config[controller][action]
-      (eval(@config[controller][action]).to_i || @default_ttl) rescue @default_ttl
-    else
-      @default_ttl
-    end
-  end
-
-  private
-  def stringify_params(*args)
-    args.map! {|a| a.to_s}
-    return *args
-  end
-
-  def setup_action_caching
-    @config.each do |controller, actions|
-      controller_class = (controller + "_controller").camelize.constantize
-      cached_actions(controller).each do |action|
-        controller_class.send :caches_action, action.to_sym, :expires_in => ttl(controller, action)
-      end
-    end
-  end
-end
-
-Wallet.new((File.open(RAILS_ROOT + "/config/wallet.yml") rescue ""))
-
-#ActionController::Base.class_eval do
-#  before_filter :wallet
-#  @@action_cached_controllers = {}
-#
-#  def wallet
-#    @wallet ||= Wallet.new((File.open(RAILS_ROOT + "/config/wallet.yml") rescue ""))
-#    controller_class_name = self.class.name 
-#    controller = controller_class_name.underscore.gsub(/_controller$/, '')
-#
-#    # if we haven't already setup action caching on this controller
-#    if @@action_cached_controllers[controller] == nil
-#
-#      @@action_cached_controllers[controller] = controller
-#      @wallet.cached_actions(controller).each do |action|
-#        puts "I'm setting up action caching for #{controller_class_name}::#{action}"
-#        controller_class_name.constantize.send :caches_action, action.to_sym, :expires_in => @wallet.ttl(controller, action)
-#      end
-#    end
-#  end
-#
-#end

data/examples/tv/test/performance/browsing_test.rb

@@ -1,9 +0,0 @@
-require 'test_helper'
-require 'performance_test_help'
-
-# Profiling results for each test method are written to tmp/performance.
-class BrowsingTest < ActionController::PerformanceTest
-  def test_homepage
-    get '/'
-  end
-end

data/examples/tv/test/test_helper.rb

@@ -1,38 +0,0 @@
-ENV["RAILS_ENV"] = "test"
-require File.expand_path(File.dirname(__FILE__) + "/../config/environment")
-require 'test_help'
-
-class ActiveSupport::TestCase
-  # Transactional fixtures accelerate your tests by wrapping each test method
-  # in a transaction that's rolled back on completion.  This ensures that the
-  # test database remains unchanged so your fixtures don't have to be reloaded
-  # between every test method.  Fewer database queries means faster tests.
-  #
-  # Read Mike Clark's excellent walkthrough at
-  #   http://clarkware.com/cgi/blosxom/2005/10/24#Rails10FastTesting
-  #
-  # Every Active Record database supports transactions except MyISAM tables
-  # in MySQL.  Turn off transactional fixtures in this case; however, if you
-  # don't care one way or the other, switching from MyISAM to InnoDB tables
-  # is recommended.
-  #
-  # The only drawback to using transactional fixtures is when you actually 
-  # need to test transactions.  Since your test is bracketed by a transaction,
-  # any transactions started in your code will be automatically rolled back.
-  self.use_transactional_fixtures = true
-
-  # Instantiated fixtures are slow, but give you @david where otherwise you
-  # would need people(:david).  If you don't want to migrate your existing
-  # test cases which use the @david style and don't mind the speed hit (each
-  # instantiated fixtures translates to a database query per test method),
-  # then set this back to true.
-  self.use_instantiated_fixtures  = false
-
-  # Setup all fixtures in test/fixtures/*.(yml|csv) for all tests in alphabetical order.
-  #
-  # Note: You'll currently still have to declare fixtures explicitly in integration tests
-  # -- they do not yet inherit this setting
-  fixtures :all
-
-  # Add more helper methods to be used by all tests here...
-end

data/lib/wallet/action_controller.rb

@@ -1,19 +0,0 @@
-#ActionController::Base.class_eval do
-#  before_filter :wallet
-#  @@action_cached_controllers = {}
-#
-#  def wallet
-#    @wallet ||= Wallet.new((File.open(RAILS_ROOT + "/config/wallet.yml") rescue ""))
-#    controller_class_name = self.class.name 
-#    controller = controller_class_name.underscore.gsub(/_controller$/, '')
-#
-#    # if we haven't already setup action caching on this controller
-#    if @@action_cached_controllers[controller] == nil
-#      @@action_cached_controllers[controller] = controller
-#      @wallet.cached_actions(controller).each do |action|
-#        controller_class_name.constantize.send :caches_action, action.to_sym, :expires_in => @wallet.ttl(controller, action)
-#      end
-#    end
-#  end
-#
-#end if defined?(ActionController::Base)