travis-cli-gh 0.0.2.travis.3.1 → 0.0.2.travis.4.1

checksums.yaml

@@ -1,15 +1,15 @@
 ---
 !binary "U0hBMQ==":
   metadata.gz: !binary |-
-    OGMzOTJhN2NiOTNmZTdjYjExNGE3NTFiMWY5NTQ0NTcxZDZkZTk2Mg==
+    ZGExMWMzYjk1ZWYxNmFmNDllZDg1N2U4YzJkZjRhOTA4MDE1MzZiOA==
   data.tar.gz: !binary |-
-    MTgyYzlmYzM1OTc1MGM4Nzk5NGFjMmZlNWUxMDkyMmM3MTE5ZjJjZQ==
+    YmJjNzc4Zjk1YjRjMzVjZjA4MTM2NzFlYmZkMWFkM2IzZjE4Y2E2MQ==
 SHA512:
   metadata.gz: !binary |-
-    N2VjZGEyN2Y0Y2YzYjEyNDA5NmM5M2RiMGUzZmQwZDkyMDY4MDk4ZWRkYzQ4
-    MmFkMjM1YTQ1ZDc0MmZhNjRiY2U2ODZmNTM2YzZjYmVlMzBlZTIxY2MxN2Ix
-    ZDY5YjY0OGJiMTM4Y2I4ZTZiMzZiYWU3ZDUyNjY0YTk5ZWZkZDU=
+    NGJmYjY3MDU4ZTE1YWJjY2E0MDdiZjgyNDI1ZjVjNTFmYzE0YjllODMyY2U5
+    MTk2MDY4YjBjNDExZmJhMGM5M2UwMjk2ZjIwNDNlMzhmMjNjNmRlZDY1ZDkx
+    ODFhMzMxNzI4N2JlNjBiOWQwOGY5MjRlNzQ1MGQxNTQzZDRjNTU=
   data.tar.gz: !binary |-
-    ZGU5YzA3ZDNmMWU3YjExNjYzZTQwODdlMGU3OGRkN2ZkMmRhNDgzMWVlYjhh
-    NDBhMzU0OTEyZmUyMGM1YWJmOWQyYmExN2UzZmYzYjg1NTQzZDFlNzczODIx
-    MjhjOWNjY2ExYTg1ZmMzMDE4MDU1NmMwM2YzNzBlMzI4ZTE5Y2Q=
+    YjNmNzg5ZjZiNGU1ZGViOGI4MDUwZTExZDRhYThlNjA3YTgyZDc3ZGM4ZGFl
+    ZGMwODEzMmEzM2MzZTUwOWUyZjVhYTgzOWMzZGNlOTVlZmU5MjRjMGZlZTgx
+    NTY1ZmNhNjM4YmY4NzJiZTU5OWRlYWEyYzQwNGQ5Nzg3YWU0Mzg=

data/README.md

@@ -4,7 +4,7 @@ This plugin for the [Travis Command Line Client](https://github.com/travis-ci/tr
 
 ## Usage
 
-This plugin adds the following commands: [`gh-cat`](#gh-cat), [`gh-fetch`](#gh-fetch), [`gh-login`](#gh-login), [`gh-signature`](#gh-signature) and [`gh-whoami`](#gh-whoami). All these commands will use the Travis API endpoint for automatically figuring out which GitHub API endpoint to use (relevant for setups using GitHub Enterprise).
+This plugin adds the following commands: [`gh-cat`](#gh-cat), [`gh-fetch`](#gh-fetch), [`gh-login`](#gh-login), [`gh-signature`](#gh-signature), [`gh-upload`](#gh-upload), [`gh-whoami`](#gh-whoami) and  [`gh-write`](#gh-write). All these commands will use the Travis API endpoint for automatically figuring out which GitHub API endpoint to use (relevant for setups using GitHub Enterprise).
 
 ### `gh-cat`
 
@@ -42,6 +42,28 @@ Like [other commands](https://github.com/travis-ci/travis#repository-commands),
 
 This signature should be kept somewhat secret, otherwise other people can send you fake web hooks.
 
+### `gh-upload`
+
+    GitHub plugin: upload one or more files to the repository.
+        -h, --help                       Display help
+        -E, --[no-]explode               don't rescue exceptions
+            --debug                      show API requests
+        -X, --enterprise [NAME]          use enterprise setup (optionally takes name for multiple setups)
+        -r, --repo SLUG                  repository to use (will try to detect from current git clone)
+        -b, --branch BRANCH              branch to write to
+        -m, --message MESSAGE            commit message
+        -C, --create                     only create new files
+        -U, --update                     only update existing files
+        -c, --committer USER             set committer (format: "name <email>", defaults to current user)
+        -a, --author USER                set author (format: "name <email>", defaults to committer)
+        -A, --append                     append to file if it already exists
+        -p, --prefix DIR                 prefix to store it under
+
+Like [`gh-write`](#gh-write), but uploads a file by the same name.
+
+    $ travis gh-upload ../somwhere/example.txt -p test
+    Uploading ../somwhere/example.txt as test/example.txt
+
 ### `gh-whoami`
 
 Displays which GitHub account you are logged in with on GitHub.
@@ -49,6 +71,29 @@ Displays which GitHub account you are logged in with on GitHub.
     $ travis gh-whoami
     logged in as rkh
 
+### `gh-write`
+
+    GitHub plugin: write stdin to the given path in the repository.
+    Usage: travis gh-write path [options]
+        -h, --help                       Display help
+        -E, --[no-]explode               don't rescue exceptions
+            --debug                      show API requests
+        -X, --enterprise [NAME]          use enterprise setup (optionally takes name for multiple setups)
+        -r, --repo SLUG                  repository to use (will try to detect from current git clone)
+        -b, --branch BRANCH              branch to write to
+        -m, --message MESSAGE            commit message
+        -C, --create                     only create new files
+        -U, --update                     only update existing files
+        -c, --committer USER             set committer (format: "name <email>", defaults to current user)
+        -a, --author USER                set author (format: "name <email>", defaults to committer)
+        -A, --append                     append to file if it already exists
+
+Reads from stdin and writes it to the given file in the repository.
+
+    $ travis gh-write example -r example/repo
+    Hi folks!
+    <Ctrl+d>
+
 ## Installation
 
 You install it like any other gem:

data/lib/travis/cli/gh.rb

@@ -10,9 +10,10 @@ module Travis
       autoload :Login,       'travis/cli/gh/login'
       autoload :Signature,   'travis/cli/gh/signature'
       autoload :Subcommands, 'travis/cli/gh/subcommands'
+      autoload :Upload,      'travis/cli/gh/upload'
       autoload :VERSION,     'travis/cli/gh/version'
       autoload :Whoami,      'travis/cli/gh/whoami'
-      #autoload :Write,       'travis/cli/gh/write'
+      autoload :Write,       'travis/cli/gh/write'
 
       extend self
 

data/lib/travis/cli/gh/fetch.rb

@@ -2,7 +2,7 @@ module Travis::CLI
   module Gh
     class Fetch < Cat
       description "download a file from a repository"
-      on '-p', '--prefix DIR', 'Prefix to store it under'
+      on '-p', '--prefix DIR', 'prefix to store it under'
       on '-f', '--force', 'override existing files'
 
       def run(*paths)

data/lib/travis/cli/gh/github.rb

@@ -6,9 +6,10 @@ module Travis::CLI
     module GitHub
       module Error
         def gh_error(e)
-          raise e unless e.respond_to? :info
+          raise e if explode? or not e.respond_to? :info
           message = e.info[:response_body].to_s
           message = JSON.load(message).fetch('message') rescue nil
+          message = "GitHub says: #{message}"
           error message
         end
       end

data/lib/travis/cli/gh/upload.rb

@@ -0,0 +1,24 @@
+require "base64"
+
+module Travis::CLI
+  module Gh
+    class Upload < Write
+      description "upload one or more files to the repository"
+      on '-p', '--prefix DIR', 'prefix to store it under'
+
+      def run(*paths)
+        paths.each do |source|
+          error "cannot read #{source}" unless File.readable? source
+          target  = File.basename(source)
+          target  = File.join(prefix, target) if prefix
+          message = "Uploading " << color(source, :important)
+          message << " as " << color(target, :important) if target != source
+          say message
+          write(target, File.read(source))
+        end
+      rescue GH::Error => e
+        gh_error(e)
+      end
+    end
+  end
+end

data/lib/travis/cli/gh/write.rb

@@ -0,0 +1,74 @@
+require "base64"
+
+module Travis::CLI
+  module Gh
+    class Write < RepoCommand
+      include GitHub::Authenticated, GitHub::Error
+      USER_FORMAT = /^(?<name>.+) <(?<email>.+@.+)>$/
+
+      description "write stdin to the given path in the repository"
+      on '-b', '--branch BRANCH', 'branch to write to'
+      on '-m', '--message MESSAGE', 'commit message'
+      on '-C', '--create', 'only create new files'
+      on '-U', '--update', 'only update existing files'
+      on '-c', '--committer USER', 'set committer (format: "name <email>", defaults to current user)'
+      on '-a', '--author USER', 'set author (format: "name <email>", defaults to committer)'
+      on '-A', '--append', 'append to file if it already exists'
+
+      def run(path)
+        write(path, input.read)
+      rescue GH::Error => e
+        gh_error(e)
+      end
+
+      def write(path, content)
+        current = get(path)
+        error "file already exists" unless update?
+        update(path, content, current)
+      rescue GH::Error => e
+        gh_error(e) unless e.info[:response_status] == 404
+        error "file does not exist" unless create?
+        create(path, content)
+      end
+
+      def update(path, content, current = get(path))
+        error "#{path} is not a file" unless current.respond_to?(:to_hash) and current['type'] == 'file'
+        content = Base64.decode64(current['content']) + content if append?
+        put(path, content, message: "Update #{path}", sha: current['sha'])
+      end
+
+      def create(path, content)
+        put(path, content, message: "Create #{path}")
+      end
+
+      def put(path, content = "", encoded_content: Base64.encode64(content), **options)
+        options[:message]   = message if message
+        options[:branch]    = branch  if branch
+        options[:content]   = encoded_content
+        options[:path]      = path
+        options[:committer] = parse_user(:committer) if committer
+        options[:author]    = parse_user(:author)    if author
+        gh.put("/repos/#{repository.slug}/contents/#{path}", options)
+      end
+
+      def get(path)
+        path = "repos/#{repository.slug}/contents/#{path}"
+        path << "?ref=#{branch}" if branch
+        gh[path]
+      end
+
+      def parse_user(field)
+        error "wrong format for #{field}, should be NAME <EMAIL>." unless match = USER_FORMAT.match(send(field).to_s)
+        { name: match[:name], email: match[:email] }
+      end
+
+      def create?
+        @create.nil? ? @update.nil? : @create
+      end
+
+      def update?
+        @update.nil? ? @create.nil? : @update
+      end
+    end
+  end
+end

metadata

@@ -1,14 +1,14 @@
 --- !ruby/object:Gem::Specification
 name: travis-cli-gh
 version: !ruby/object:Gem::Version
-  version: 0.0.2.travis.3.1
+  version: 0.0.2.travis.4.1
 platform: ruby
 authors:
 - Konstantin Haase
 autorequire: 
 bindir: bin
 cert_chain: []
-date: 2013-12-28 00:00:00.000000000 Z
+date: 2013-12-29 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: travis
@@ -86,8 +86,10 @@ files:
 - lib/travis/cli/gh/login.rb
 - lib/travis/cli/gh/signature.rb
 - lib/travis/cli/gh/subcommands.rb
+- lib/travis/cli/gh/upload.rb
 - lib/travis/cli/gh/version.rb
 - lib/travis/cli/gh/whoami.rb
+- lib/travis/cli/gh/write.rb
 - setup/extconf.rb
 - spec/subcommands_spec.rb
 - travis-cli-gh.gemspec