tanning_bed_solr 0.0.1

data/.bnsignore

@@ -0,0 +1,18 @@
+# The list of files that should be ignored by Mr Bones.
+# Lines that start with '#' are comments.
+#
+# A .gitignore file can be used instead by setting it as the ignore
+# file in your Rakefile:
+#
+#   Bones {
+#     ignore_file  '.gitignore'
+#   }
+#
+# For a project with a C extension, the following would be a good set of
+# exclude patterns (uncomment them if you want to use them):
+# *.[oa]
+# *~
+announcement.txt
+coverage
+doc
+pkg

data/.gitignore

@@ -0,0 +1,9 @@
+announcement.txt
+coverage
+doc
+pkg/*
+vendor/solr/solr/data/*
+vendor/solr/logs/*
+!vendor/solr/logs/.keep
+vendor/solr/tmp
+spec/tmp/*

data/History.txt

@@ -0,0 +1,4 @@
+== 1.0.0 / 2010-03-15
+
+* 1 major enhancement
+  * Birthday!

data/README.txt

@@ -0,0 +1,45 @@
+tanning_bed_solr
+    by Rob Kaufman
+    http://notch8.com
+
+== DESCRIPTION:
+
+This is the solr binary packaged up for easy inclusion with Tanning Bed
+
+== FEATURES/PROBLEMS:
+
+
+== SYNOPSIS:
+
+This is the solr binary packaged up for easy inclusion with Tanning Bed
+
+== REQUIREMENTS:
+
+== INSTALL:
+
+* sudo gem install tanning_bed_solr
+
+== LICENSE:
+
+(The MIT License)
+
+Copyright (c) 2010 Rob Kaufman
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+'Software'), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED 'AS IS', WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

data/Rakefile

@@ -0,0 +1,18 @@
+
+begin
+  require 'bones'
+rescue LoadError
+  abort '### Please install the "bones" gem ###'
+end
+
+task :default => 'test:run'
+task 'gem:release' => 'test:run'
+
+Bones {
+  name  'tanning_bed_solr'
+  authors  'Rob Kaufman'
+  email    'rob@notch8.com'
+  url      'http://notch8.com'
+  ignore_file  '.gitignore'
+}
+

data/lib/tanning_bed_solr.rb

@@ -0,0 +1,65 @@
+
+module TanningBedSolr
+
+  # :stopdoc:
+  LIBPATH = ::File.expand_path(::File.dirname(__FILE__)) + ::File::SEPARATOR
+  PATH = ::File.dirname(LIBPATH) + ::File::SEPARATOR
+  # :startdoc:
+
+  # Returns the version string for the library.
+  #
+  def self.version
+    @version ||= File.read(path('version.txt')).strip
+  end
+
+  # Returns the library path for the module. If any arguments are given,
+  # they will be joined to the end of the libray path using
+  # <tt>File.join</tt>.
+  #
+  def self.libpath( *args, &block )
+    rv =  args.empty? ? LIBPATH : ::File.join(LIBPATH, args.flatten)
+    if block
+      begin
+        $LOAD_PATH.unshift LIBPATH
+        rv = block.call
+      ensure
+        $LOAD_PATH.shift
+      end
+    end
+    return rv
+  end
+
+  # Returns the lpath for the module. If any arguments are given,
+  # they will be joined to the end of the path using
+  # <tt>File.join</tt>.
+  #
+  def self.path( *args, &block )
+    rv = args.empty? ? PATH : ::File.join(PATH, args.flatten)
+    if block
+      begin
+        $LOAD_PATH.unshift PATH
+        rv = block.call
+      ensure
+        $LOAD_PATH.shift
+      end
+    end
+    return rv
+  end
+
+  # Utility method used to require all files ending in .rb that lie in the
+  # directory below this file that has the same name as the filename passed
+  # in. Optionally, a specific _directory_ name can be passed in such that
+  # the _filename_ does not have to be equivalent to the directory.
+  #
+  def self.require_all_libs_relative_to( fname, dir = nil )
+    dir ||= ::File.basename(fname, '.*')
+    search_me = ::File.expand_path(
+        ::File.join(::File.dirname(fname), dir, '**', '*.rb'))
+
+    Dir.glob(search_me).sort.each {|rb| require rb}
+  end
+
+end  # module TanningBedSolr
+
+TanningBedSolr.require_all_libs_relative_to(__FILE__)
+

data/vendor/solr/README.txt

@@ -0,0 +1,42 @@
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements.  See the NOTICE file distributed with
+# this work for additional information regarding copyright ownership.
+# The ASF licenses this file to You under the Apache License, Version 2.0
+# (the "License"); you may not use this file except in compliance with
+# the License.  You may obtain a copy of the License at
+#
+#     http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+Solr example configuration
+--------------------------
+
+To run this example configuration, use 
+
+  java -jar start.jar
+
+in this directory, and when Solr is started connect to 
+
+  http://localhost:8983/solr/admin/
+
+To add documents to the index, use the post.sh script in the exampledocs
+subdirectory (while Solr is running), for example:
+
+  cd exampledocs
+  ./post.sh *.xml
+
+See also README.txt in the solr subdirectory, and check
+http://wiki.apache.org/solr/SolrResources for a list of tutorials and
+introductory articles.
+
+NOTE: This Solr example server references SolrCell jars outside of the server
+directory with <lib> statements in the solrconfig.xml.  If you make a copy of
+this example server and wish to use the ExtractingRequestHandler (SolrCell),
+you will need to copy the required jars into solr/lib or update the paths to
+the jars in your solrconfig.xml.
+

data/vendor/solr/etc/jetty.xml

@@ -0,0 +1,212 @@
+<?xml version="1.0"?>
+<!DOCTYPE Configure PUBLIC "-//Mort Bay Consulting//DTD Configure//EN" "http://jetty.mortbay.org/configure.dtd">
+
+<!-- =============================================================== -->
+<!-- Configure the Jetty Server                                      -->
+<!--                                                                 -->
+<!-- Documentation of this file format can be found at:              -->
+<!-- http://docs.codehaus.org/display/JETTY/jetty.xml                -->
+<!--                                                                 -->
+<!-- =============================================================== -->
+
+
+<Configure id="Server" class="org.mortbay.jetty.Server">
+
+    <!-- Increase the maximum POST size to 1 MB to be able to handle large shard requests -->
+    <Call class="java.lang.System" name="setProperty">
+      <Arg>org.mortbay.jetty.Request.maxFormContentSize</Arg>
+      <Arg>1000000</Arg>
+    </Call>
+
+    <!-- =========================================================== -->
+    <!-- Server Thread Pool                                          -->
+    <!-- =========================================================== -->
+    <Set name="ThreadPool">
+      <!-- Default bounded blocking threadpool 
+      -->
+      <New class="org.mortbay.thread.BoundedThreadPool">
+        <Set name="minThreads">10</Set>
+        <Set name="lowThreads">50</Set>
+        <Set name="maxThreads">10000</Set>
+      </New>
+
+      <!-- Optional Java 5 bounded threadpool with job queue 
+      <New class="org.mortbay.thread.concurrent.ThreadPool">
+        <Arg type="int">0</Arg>
+        <Set name="corePoolSize">10</Set>
+        <Set name="maximumPoolSize">250</Set>
+      </New>
+      -->
+    </Set>
+
+
+
+    <!-- =========================================================== -->
+    <!-- Set connectors                                              -->
+    <!-- =========================================================== -->
+    <!-- One of each type!                                           -->
+    <!-- =========================================================== -->
+
+    <!-- Use this connector for many frequently idle connections
+         and for threadless continuations.
+    <Call name="addConnector">
+      <Arg>
+          <New class="org.mortbay.jetty.nio.SelectChannelConnector">
+            <Set name="port"><SystemProperty name="jetty.port" default="8983"/></Set>
+            <Set name="maxIdleTime">30000</Set>
+            <Set name="Acceptors">2</Set>
+            <Set name="confidentialPort">8443</Set>
+          </New>
+      </Arg>
+    </Call>
+   -->     
+
+    <!-- Use this connector if NIO is not available. -->
+    <!-- This connector is currently being used for Solr because the
+         nio.SelectChannelConnector showed poor performance under WindowsXP
+         from a single client with non-persistent connections (35s vs ~3min)
+         to complete 10,000 requests)
+    -->
+    <Call name="addConnector">
+      <Arg>
+          <New class="org.mortbay.jetty.bio.SocketConnector">
+            <Set name="port"><SystemProperty name="jetty.port" default="8983"/></Set>
+            <Set name="maxIdleTime">50000</Set>
+            <Set name="lowResourceMaxIdleTime">1500</Set>
+          </New>
+      </Arg>
+    </Call>
+
+    <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -->
+    <!-- To add a HTTPS SSL listener                                     -->
+    <!-- see jetty-ssl.xml to add an ssl connector. use                  -->
+    <!-- java -jar start.jar etc/jetty.xml etc/jetty-ssl.xml             -->
+    <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -->
+    
+    <!-- =========================================================== -->
+    <!-- Set up global session ID manager                            -->
+    <!-- =========================================================== -->
+    <!--
+    <Set name="sessionIdManager">
+      <New class="org.mortbay.jetty.servlet.HashSessionIdManager">
+        <Set name="workerName">node1</Set>
+      </New>
+    </Set>
+    -->
+
+    <!-- =========================================================== -->
+    <!-- Set handler Collection Structure                            --> 
+    <!-- =========================================================== -->
+    <Set name="handler">
+      <New id="Handlers" class="org.mortbay.jetty.handler.HandlerCollection">
+        <Set name="handlers">
+         <Array type="org.mortbay.jetty.Handler">
+           <Item>
+             <New id="Contexts" class="org.mortbay.jetty.handler.ContextHandlerCollection"/>
+           </Item>
+           <Item>
+             <New id="DefaultHandler" class="org.mortbay.jetty.handler.DefaultHandler"/>
+           </Item>
+           <Item>
+             <New id="RequestLog" class="org.mortbay.jetty.handler.RequestLogHandler"/>
+           </Item>
+         </Array>
+        </Set>
+      </New>
+    </Set>
+    
+    <!-- =========================================================== -->
+    <!-- Configure the context deployer                              -->
+    <!-- A context deployer will deploy contexts described in        -->
+    <!-- configuration files discovered in a directory.              -->
+    <!-- The configuration directory can be scanned for hot          -->
+    <!-- deployments at the configured scanInterval.                 -->
+    <!--                                                             -->
+    <!-- This deployer is configured to deploy contexts configured   -->
+    <!-- in the $JETTY_HOME/contexts directory                       -->
+    <!--                                                             -->
+    <!-- =========================================================== -->
+    <Call name="addLifeCycle">
+      <Arg>
+        <New class="org.mortbay.jetty.deployer.ContextDeployer">
+          <Set name="contexts"><Ref id="Contexts"/></Set>
+          <Set name="configurationDir"><SystemProperty name="jetty.home" default="."/>/contexts</Set>
+          <Set name="scanInterval">1</Set>
+        </New>
+      </Arg>
+    </Call>
+
+    <!-- =========================================================== -->
+    <!-- Configure the webapp deployer.                              -->
+    <!-- A webapp  deployer will deploy standard webapps discovered  -->
+    <!-- in a directory at startup, without the need for additional  -->
+    <!-- configuration files.    It does not support hot deploy or   -->
+    <!-- non standard contexts (see ContextDeployer above).          -->
+    <!--                                                             -->
+    <!-- This deployer is configured to deploy webapps from the      -->
+    <!-- $JETTY_HOME/webapps directory                               -->
+    <!--                                                             -->
+    <!-- Normally only one type of deployer need be used.            -->
+    <!--                                                             -->
+    <!-- =========================================================== -->
+    <Call name="addLifeCycle">
+      <Arg>
+        <New class="org.mortbay.jetty.deployer.WebAppDeployer">
+          <Set name="contexts"><Ref id="Contexts"/></Set>
+          <Set name="webAppDir"><SystemProperty name="jetty.home" default="."/>/webapps</Set>
+				  <Set name="parentLoaderPriority">false</Set>
+				  <Set name="extract">true</Set>
+				  <Set name="allowDuplicates">false</Set>
+          <Set name="defaultsDescriptor"><SystemProperty name="jetty.home" default="."/>/etc/webdefault.xml</Set>
+        </New>
+      </Arg>
+    </Call>
+
+    <!-- =========================================================== -->
+    <!-- Configure Authentication Realms                             -->
+    <!-- Realms may be configured for the entire server here, or     -->
+    <!-- they can be configured for a specific web app in a context  -->
+    <!-- configuration (see $(jetty.home)/contexts/test.xml for an   -->
+    <!-- example).                                                   -->
+    <!-- =========================================================== -->
+    <Set name="UserRealms">
+      <Array type="org.mortbay.jetty.security.UserRealm">
+        <!--
+        <Item>
+          <New class="org.mortbay.jetty.security.HashUserRealm">
+            <Set name="name">Test Realm</Set>
+            <Set name="config"><SystemProperty name="jetty.home" default="."/>/etc/realm.properties</Set>
+          </New>
+        </Item>
+	-->
+      </Array>
+    </Set>
+
+    <!-- =========================================================== -->
+    <!-- Configure Request Log                                       -->
+    <!-- Request logs  may be configured for the entire server here, -->
+    <!-- or they can be configured for a specific web app in a       -->
+    <!-- contexts configuration (see $(jetty.home)/contexts/test.xml -->
+    <!-- for an example).                                            -->
+    <!-- =========================================================== -->
+    <Ref id="RequestLog">
+      <Set name="requestLog">
+        <New id="RequestLogImpl" class="org.mortbay.jetty.NCSARequestLog">
+          <Arg><SystemProperty name="jetty.logs" default="./logs"/>/yyyy_mm_dd.request.log</Arg>
+          <Set name="retainDays">90</Set>
+          <Set name="append">true</Set>
+          <Set name="extended">false</Set>
+          <Set name="LogTimeZone">GMT</Set>
+        </New>
+      </Set>
+    </Ref>
+
+    <!-- =========================================================== -->
+    <!-- extra options                                               -->
+    <!-- =========================================================== -->
+    <Set name="stopAtShutdown">true</Set>
+    <!-- ensure/prevent Server: header being sent to browsers        -->
+    <Set name="sendServerVersion">true</Set>
+
+</Configure>
+

data/vendor/solr/etc/webdefault.xml

@@ -0,0 +1,379 @@
+<?xml version="1.0" encoding="ISO-8859-1"?>
+
+<!-- ===================================================================== -->
+<!-- This file contains the default descriptor for web applications.       -->
+<!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -->
+<!-- The intent of this descriptor is to include jetty specific or common  -->
+<!-- configuration for all webapps.   If a context has a webdefault.xml    -->
+<!-- descriptor, it is applied before the contexts own web.xml file        -->
+<!--                                                                       -->
+<!-- A context may be assigned a default descriptor by:                    -->
+<!--  + Calling WebApplicationContext.setDefaultsDescriptor                -->
+<!--  + Passed an arg to addWebApplications                                -->
+<!--                                                                       -->
+<!-- This file is used both as the resource within the jetty.jar (which is -->
+<!-- used as the default if no explicit defaults descriptor is set) and it -->
+<!-- is copied to the etc directory of the Jetty distro and explicitly     -->
+<!-- by the jetty.xml file.                                                -->
+<!--                                                                       -->
+<!-- ===================================================================== -->
+<web-app 
+   xmlns="http://java.sun.com/xml/ns/javaee" 
+   xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+   xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" 
+   metadata-complete="true"
+   version="2.5"> 
+
+  <description>
+    Default web.xml file.  
+    This file is applied to a Web application before it's own WEB_INF/web.xml file
+  </description>
+
+
+  <!-- ==================================================================== -->
+  <!-- Context params to control Session Cookies                            -->
+  <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  -->
+  <!-- UNCOMMENT TO ACTIVATE
+  <context-param>
+    <param-name>org.mortbay.jetty.servlet.SessionDomain</param-name>
+    <param-value>127.0.0.1</param-value>
+  </context-param>
+
+  <context-param>
+    <param-name>org.mortbay.jetty.servlet.SessionPath</param-name>
+    <param-value>/</param-value>
+  </context-param>
+
+  <context-param>
+    <param-name>org.mortbay.jetty.servlet.MaxAge</param-name>
+    <param-value>-1</param-value>
+  </context-param>
+  -->
+
+  <context-param>
+    <param-name>org.mortbay.jetty.webapp.NoTLDJarPattern</param-name>
+    <param-value>start.jar|ant-.*\.jar|dojo-.*\.jar|jetty-.*\.jar|jsp-api-.*\.jar|junit-.*\.jar|servlet-api-.*\.jar|dnsns\.jar|rt\.jar|jsse\.jar|tools\.jar|sunpkcs11\.jar|sunjce_provider\.jar|xerces.*\.jar|</param-value>
+  </context-param>
+            
+
+
+  <!-- ==================================================================== -->
+  <!-- The default servlet.                                                 -->
+  <!-- This servlet, normally mapped to /, provides the handling for static -->
+  <!-- content, OPTIONS and TRACE methods for the context.                  -->
+  <!-- The following initParameters are supported:                          -->
+  <!--                                                                      -->
+  <!--   acceptRanges     If true, range requests and responses are         -->
+  <!--                    supported                                         -->
+  <!--                                                                      -->
+  <!--   dirAllowed       If true, directory listings are returned if no    -->
+  <!--                    welcome file is found. Else 403 Forbidden.        -->
+  <!--                                                                      -->
+  <!--   redirectWelcome  If true, redirect welcome file requests           -->
+  <!--                    else use request dispatcher forwards              -->
+  <!--                                                                      -->
+  <!--   gzip             If set to true, then static content will be served--> 
+  <!--                    as gzip content encoded if a matching resource is -->
+  <!--                    found ending with ".gz"                           -->
+  <!--                                                                      -->
+  <!--   resoureBase      Can be set to replace the context resource base   -->
+  <!--                                                                      -->
+  <!--   relativeResourceBase                                               -->
+  <!--                    Set with a pathname relative to the base of the   -->
+  <!--                    servlet context root. Useful for only serving     -->
+  <!--                    static content from only specific subdirectories. -->
+  <!--                                                                      -->
+  <!--   useFileMappedBuffer                                                -->
+  <!--                    If set to true (the default), a  memory mapped    -->
+  <!--                    file buffer will be used to serve static content  -->
+  <!--                    when using an NIO connector. Setting this value   -->
+  <!--                    to false means that a direct buffer will be used  -->
+  <!--                    instead. If you are having trouble with Windows   -->
+  <!--                    file locking, set this to false.                  -->
+  <!--                                                                      -->
+  <!--  cacheControl      If set, all static content will have this value   -->
+  <!--                    set as the cache-control header.                  -->
+  <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  -->
+  <servlet>
+    <servlet-name>default</servlet-name>
+    <servlet-class>org.mortbay.jetty.servlet.DefaultServlet</servlet-class>
+    <init-param>
+      <param-name>acceptRanges</param-name>
+      <param-value>true</param-value>
+    </init-param>
+    <init-param>
+      <param-name>dirAllowed</param-name>
+      <param-value>true</param-value>
+    </init-param>
+    <init-param>
+      <param-name>redirectWelcome</param-name>
+      <param-value>false</param-value>
+    </init-param>
+    <init-param>
+      <param-name>maxCacheSize</param-name>
+      <param-value>2000000</param-value>
+    </init-param>
+    <init-param>
+      <param-name>maxCachedFileSize</param-name>
+      <param-value>254000</param-value>
+    </init-param>
+    <init-param>
+      <param-name>maxCachedFiles</param-name>
+      <param-value>1000</param-value>
+    </init-param>
+    <init-param>
+      <param-name>gzip</param-name>
+      <param-value>false</param-value>
+    </init-param>
+    <init-param>
+      <param-name>useFileMappedBuffer</param-name>
+      <param-value>false</param-value>
+    </init-param>  
+    <!--
+    <init-param>
+      <param-name>cacheControl</param-name>
+      <param-value>max-age=3600,public</param-value>
+    </init-param>
+    -->
+    <load-on-startup>0</load-on-startup>
+  </servlet> 
+
+  <servlet-mapping> <servlet-name>default</servlet-name> <url-pattern>/</url-pattern> </servlet-mapping>
+  
+
+  <!-- ==================================================================== -->
+  <!-- JSP Servlet                                                          -->
+  <!-- This is the jasper JSP servlet from the jakarta project              -->
+  <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  -->
+  <!-- The JSP page compiler and execution servlet, which is the mechanism  -->
+  <!-- used by Glassfish to support JSP pages.  Traditionally, this servlet -->
+  <!-- is mapped to URL patterh "*.jsp".  This servlet supports the         -->
+  <!-- following initialization parameters (default values are in square    -->
+  <!-- brackets):                                                           -->
+  <!--                                                                      -->
+  <!--   checkInterval       If development is false and reloading is true, -->
+  <!--                       background compiles are enabled. checkInterval -->
+  <!--                       is the time in seconds between checks to see   -->
+  <!--                       if a JSP page needs to be recompiled. [300]    -->
+  <!--                                                                      -->
+  <!--   compiler            Which compiler Ant should use to compile JSP   -->
+  <!--                       pages.  See the Ant documenation for more      -->
+  <!--                       information. [javac]                           -->
+  <!--                                                                      -->
+  <!--   classdebuginfo      Should the class file be compiled with         -->
+  <!--                       debugging information?  [true]                 -->
+  <!--                                                                      -->
+  <!--   classpath           What class path should I use while compiling   -->
+  <!--                       generated servlets?  [Created dynamically      -->
+  <!--                       based on the current web application]          -->
+  <!--                       Set to ? to make the container explicitly set  -->
+  <!--                       this parameter.                                -->
+  <!--                                                                      -->
+  <!--   development         Is Jasper used in development mode (will check -->
+  <!--                       for JSP modification on every access)?  [true] -->
+  <!--                                                                      -->
+  <!--   enablePooling       Determines whether tag handler pooling is      -->
+  <!--                       enabled  [true]                                -->
+  <!--                                                                      -->
+  <!--   fork                Tell Ant to fork compiles of JSP pages so that -->
+  <!--                       a separate JVM is used for JSP page compiles   -->
+  <!--                       from the one Tomcat is running in. [true]      -->
+  <!--                                                                      -->
+  <!--   ieClassId           The class-id value to be sent to Internet      -->
+  <!--                       Explorer when using <jsp:plugin> tags.         -->
+  <!--                       [clsid:8AD9C840-044E-11D1-B3E9-00805F499D93]   -->
+  <!--                                                                      -->
+  <!--   javaEncoding        Java file encoding to use for generating java  -->
+  <!--                       source files. [UTF-8]                          -->
+  <!--                                                                      -->
+  <!--   keepgenerated       Should we keep the generated Java source code  -->
+  <!--                       for each page instead of deleting it? [true]   -->
+  <!--                                                                      -->
+  <!--   logVerbosityLevel   The level of detailed messages to be produced  -->
+  <!--                       by this servlet.  Increasing levels cause the  -->
+  <!--                       generation of more messages.  Valid values are -->
+  <!--                       FATAL, ERROR, WARNING, INFORMATION, and DEBUG. -->
+  <!--                       [WARNING]                                      -->
+  <!--                                                                      -->
+  <!--   mappedfile          Should we generate static content with one     -->
+  <!--                       print statement per input line, to ease        -->
+  <!--                       debugging?  [false]                            -->
+  <!--                                                                      -->
+  <!--                                                                      -->
+  <!--   reloading           Should Jasper check for modified JSPs?  [true] -->
+  <!--                                                                      -->
+  <!--   suppressSmap        Should the generation of SMAP info for JSR45   -->
+  <!--                       debugging be suppressed?  [false]              -->
+  <!--                                                                      -->
+  <!--   dumpSmap            Should the SMAP info for JSR45 debugging be    -->
+  <!--                       dumped to a file? [false]                      -->
+  <!--                       False if suppressSmap is true                  -->
+  <!--                                                                      -->
+  <!--   scratchdir          What scratch directory should we use when      -->
+  <!--                       compiling JSP pages?  [default work directory  -->
+  <!--                       for the current web application]               -->
+  <!--                                                                      -->
+  <!--   tagpoolMaxSize      The maximum tag handler pool size  [5]         -->
+  <!--                                                                      -->
+  <!--   xpoweredBy          Determines whether X-Powered-By response       -->
+  <!--                       header is added by generated servlet  [false]  -->
+  <!--                                                                      -->
+  <!-- If you wish to use Jikes to compile JSP pages:                       -->
+  <!--   Set the init parameter "compiler" to "jikes".  Define              -->
+  <!--   the property "-Dbuild.compiler.emacs=true" when starting Jetty     -->
+  <!--   to cause Jikes to emit error messages in a format compatible with  -->
+  <!--   Jasper.                                                            -->
+  <!--   If you get an error reporting that jikes can't use UTF-8 encoding, -->
+  <!--   try setting the init parameter "javaEncoding" to "ISO-8859-1".     -->
+  <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  -->
+  <servlet id="jsp">
+    <servlet-name>jsp</servlet-name>
+    <servlet-class>org.apache.jasper.servlet.JspServlet</servlet-class>
+    <init-param>
+        <param-name>logVerbosityLevel</param-name>
+        <param-value>DEBUG</param-value>
+    </init-param>
+    <init-param>
+        <param-name>fork</param-name>
+        <param-value>false</param-value>
+    </init-param>
+    <init-param>
+        <param-name>xpoweredBy</param-name>
+        <param-value>false</param-value>
+    </init-param>
+    <!--  
+    <init-param>
+        <param-name>classpath</param-name>
+        <param-value>?</param-value>
+    </init-param>
+    -->
+    <load-on-startup>0</load-on-startup>
+  </servlet>
+
+  <servlet-mapping> 
+    <servlet-name>jsp</servlet-name> 
+    <url-pattern>*.jsp</url-pattern> 
+    <url-pattern>*.jspf</url-pattern>
+    <url-pattern>*.jspx</url-pattern>
+    <url-pattern>*.xsp</url-pattern>
+    <url-pattern>*.JSP</url-pattern> 
+    <url-pattern>*.JSPF</url-pattern>
+    <url-pattern>*.JSPX</url-pattern>
+    <url-pattern>*.XSP</url-pattern>
+  </servlet-mapping>
+  
+  <!-- ==================================================================== -->
+  <!-- Dynamic Servlet Invoker.                                             -->
+  <!-- This servlet invokes anonymous servlets that have not been defined   -->
+  <!-- in the web.xml or by other means. The first element of the pathInfo  -->
+  <!-- of a request passed to the envoker is treated as a servlet name for  -->
+  <!-- an existing servlet, or as a class name of a new servlet.            -->
+  <!-- This servlet is normally mapped to /servlet/*                        -->
+  <!-- This servlet support the following initParams:                       -->
+  <!--                                                                      -->
+  <!--  nonContextServlets       If false, the invoker can only load        -->
+  <!--                           servlets from the contexts classloader.    -->
+  <!--                           This is false by default and setting this  -->
+  <!--                           to true may have security implications.    -->
+  <!--                                                                      -->
+  <!--  verbose                  If true, log dynamic loads                 -->
+  <!--                                                                      -->
+  <!--  *                        All other parameters are copied to the     -->
+  <!--                           each dynamic servlet as init parameters    -->
+  <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  -->
+  <!-- Uncomment for dynamic invocation
+  <servlet>
+    <servlet-name>invoker</servlet-name>
+    <servlet-class>org.mortbay.jetty.servlet.Invoker</servlet-class>
+    <init-param>
+      <param-name>verbose</param-name>
+      <param-value>false</param-value>
+    </init-param>
+    <init-param>
+      <param-name>nonContextServlets</param-name>
+      <param-value>false</param-value>
+    </init-param>
+    <init-param>
+      <param-name>dynamicParam</param-name>
+      <param-value>anyValue</param-value>
+    </init-param>
+    <load-on-startup>0</load-on-startup>
+  </servlet>
+
+  <servlet-mapping> <servlet-name>invoker</servlet-name> <url-pattern>/servlet/*</url-pattern> </servlet-mapping>
+  -->
+
+
+
+  <!-- ==================================================================== -->
+  <session-config>
+    <session-timeout>30</session-timeout>
+  </session-config>
+
+  <!-- ==================================================================== -->
+  <!-- Default MIME mappings                                                -->
+  <!-- The default MIME mappings are provided by the mime.properties        -->
+  <!-- resource in the org.mortbay.jetty.jar file.  Additional or modified  -->
+  <!-- mappings may be specified here                                       -->
+  <!-- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -  -->
+  <!-- UNCOMMENT TO ACTIVATE
+  <mime-mapping>
+    <extension>mysuffix</extension>
+    <mime-type>mymime/type</mime-type>
+  </mime-mapping>
+  -->
+
+  <!-- ==================================================================== -->
+  <welcome-file-list>
+    <welcome-file>index.html</welcome-file>
+    <welcome-file>index.htm</welcome-file>
+    <welcome-file>index.jsp</welcome-file>
+  </welcome-file-list>
+
+  <!-- ==================================================================== -->
+  <locale-encoding-mapping-list>
+    <locale-encoding-mapping><locale>ar</locale><encoding>ISO-8859-6</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>be</locale><encoding>ISO-8859-5</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>bg</locale><encoding>ISO-8859-5</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>ca</locale><encoding>ISO-8859-1</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>cs</locale><encoding>ISO-8859-2</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>da</locale><encoding>ISO-8859-1</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>de</locale><encoding>ISO-8859-1</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>el</locale><encoding>ISO-8859-7</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>en</locale><encoding>ISO-8859-1</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>es</locale><encoding>ISO-8859-1</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>et</locale><encoding>ISO-8859-1</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>fi</locale><encoding>ISO-8859-1</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>fr</locale><encoding>ISO-8859-1</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>hr</locale><encoding>ISO-8859-2</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>hu</locale><encoding>ISO-8859-2</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>is</locale><encoding>ISO-8859-1</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>it</locale><encoding>ISO-8859-1</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>iw</locale><encoding>ISO-8859-8</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>ja</locale><encoding>Shift_JIS</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>ko</locale><encoding>EUC-KR</encoding></locale-encoding-mapping>     
+    <locale-encoding-mapping><locale>lt</locale><encoding>ISO-8859-2</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>lv</locale><encoding>ISO-8859-2</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>mk</locale><encoding>ISO-8859-5</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>nl</locale><encoding>ISO-8859-1</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>no</locale><encoding>ISO-8859-1</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>pl</locale><encoding>ISO-8859-2</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>pt</locale><encoding>ISO-8859-1</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>ro</locale><encoding>ISO-8859-2</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>ru</locale><encoding>ISO-8859-5</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>sh</locale><encoding>ISO-8859-5</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>sk</locale><encoding>ISO-8859-2</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>sl</locale><encoding>ISO-8859-2</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>sq</locale><encoding>ISO-8859-2</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>sr</locale><encoding>ISO-8859-5</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>sv</locale><encoding>ISO-8859-1</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>tr</locale><encoding>ISO-8859-9</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>uk</locale><encoding>ISO-8859-5</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>zh</locale><encoding>GB2312</encoding></locale-encoding-mapping>
+    <locale-encoding-mapping><locale>zh_TW</locale><encoding>Big5</encoding></locale-encoding-mapping>   
+  </locale-encoding-mapping-list>
+
+  
+  
+</web-app>
+