stripe 5.38.0 → 15.2.1

data/lib/stripe/resources/treasury/transaction.rb

@@ -0,0 +1,193 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module Treasury
+    # Transactions represent changes to a [FinancialAccount's](https://stripe.com/docs/api#financial_accounts) balance.
+    class Transaction < APIResource
+      extend Stripe::APIOperations::List
+
+      OBJECT_NAME = "treasury.transaction"
+      def self.object_name
+        "treasury.transaction"
+      end
+
+      class BalanceImpact < Stripe::StripeObject
+        # The change made to funds the user can spend right now.
+        attr_reader :cash
+        # The change made to funds that are not spendable yet, but will become available at a later time.
+        attr_reader :inbound_pending
+        # The change made to funds in the account, but not spendable because they are being held for pending outbound flows.
+        attr_reader :outbound_pending
+      end
+
+      class FlowDetails < Stripe::StripeObject
+        # You can reverse some [ReceivedCredits](https://stripe.com/docs/api#received_credits) depending on their network and source flow. Reversing a ReceivedCredit leads to the creation of a new object known as a CreditReversal.
+        attr_reader :credit_reversal
+        # You can reverse some [ReceivedDebits](https://stripe.com/docs/api#received_debits) depending on their network and source flow. Reversing a ReceivedDebit leads to the creation of a new object known as a DebitReversal.
+        attr_reader :debit_reversal
+        # Use [InboundTransfers](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/into/inbound-transfers) to add funds to your [FinancialAccount](https://stripe.com/docs/api#financial_accounts) via a PaymentMethod that is owned by you. The funds will be transferred via an ACH debit.
+        #
+        # Related guide: [Moving money with Treasury using InboundTransfer objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/into/inbound-transfers)
+        attr_reader :inbound_transfer
+        # When an [issued card](https://stripe.com/docs/issuing) is used to make a purchase, an Issuing `Authorization`
+        # object is created. [Authorizations](https://stripe.com/docs/issuing/purchases/authorizations) must be approved for the
+        # purchase to be completed successfully.
+        #
+        # Related guide: [Issued card authorizations](https://stripe.com/docs/issuing/purchases/authorizations)
+        attr_reader :issuing_authorization
+        # Use [OutboundPayments](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-payments) to send funds to another party's external bank account or [FinancialAccount](https://stripe.com/docs/api#financial_accounts). To send money to an account belonging to the same user, use an [OutboundTransfer](https://stripe.com/docs/api#outbound_transfers).
+        #
+        # Simulate OutboundPayment state changes with the `/v1/test_helpers/treasury/outbound_payments` endpoints. These methods can only be called on test mode objects.
+        #
+        # Related guide: [Moving money with Treasury using OutboundPayment objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-payments)
+        attr_reader :outbound_payment
+        # Use [OutboundTransfers](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-transfers) to transfer funds from a [FinancialAccount](https://stripe.com/docs/api#financial_accounts) to a PaymentMethod belonging to the same entity. To send funds to a different party, use [OutboundPayments](https://stripe.com/docs/api#outbound_payments) instead. You can send funds over ACH rails or through a domestic wire transfer to a user's own external bank account.
+        #
+        # Simulate OutboundTransfer state changes with the `/v1/test_helpers/treasury/outbound_transfers` endpoints. These methods can only be called on test mode objects.
+        #
+        # Related guide: [Moving money with Treasury using OutboundTransfer objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-transfers)
+        attr_reader :outbound_transfer
+        # ReceivedCredits represent funds sent to a [FinancialAccount](https://stripe.com/docs/api#financial_accounts) (for example, via ACH or wire). These money movements are not initiated from the FinancialAccount.
+        attr_reader :received_credit
+        # ReceivedDebits represent funds pulled from a [FinancialAccount](https://stripe.com/docs/api#financial_accounts). These are not initiated from the FinancialAccount.
+        attr_reader :received_debit
+        # Type of the flow that created the Transaction. Set to the same value as `flow_type`.
+        attr_reader :type
+      end
+
+      class StatusTransitions < Stripe::StripeObject
+        # Timestamp describing when the Transaction changed status to `posted`.
+        attr_reader :posted_at
+        # Timestamp describing when the Transaction changed status to `void`.
+        attr_reader :void_at
+      end
+
+      class ListParams < Stripe::RequestParams
+        class Created < Stripe::RequestParams
+          # Minimum value to filter by (exclusive)
+          attr_accessor :gt
+          # Minimum value to filter by (inclusive)
+          attr_accessor :gte
+          # Maximum value to filter by (exclusive)
+          attr_accessor :lt
+          # Maximum value to filter by (inclusive)
+          attr_accessor :lte
+
+          def initialize(gt: nil, gte: nil, lt: nil, lte: nil)
+            @gt = gt
+            @gte = gte
+            @lt = lt
+            @lte = lte
+          end
+        end
+
+        class StatusTransitions < Stripe::RequestParams
+          class PostedAt < Stripe::RequestParams
+            # Minimum value to filter by (exclusive)
+            attr_accessor :gt
+            # Minimum value to filter by (inclusive)
+            attr_accessor :gte
+            # Maximum value to filter by (exclusive)
+            attr_accessor :lt
+            # Maximum value to filter by (inclusive)
+            attr_accessor :lte
+
+            def initialize(gt: nil, gte: nil, lt: nil, lte: nil)
+              @gt = gt
+              @gte = gte
+              @lt = lt
+              @lte = lte
+            end
+          end
+          # Returns Transactions with `posted_at` within the specified range.
+          attr_accessor :posted_at
+
+          def initialize(posted_at: nil)
+            @posted_at = posted_at
+          end
+        end
+        # Only return Transactions that were created during the given date interval.
+        attr_accessor :created
+        # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
+        attr_accessor :ending_before
+        # Specifies which fields in the response should be expanded.
+        attr_accessor :expand
+        # Returns objects associated with this FinancialAccount.
+        attr_accessor :financial_account
+        # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
+        attr_accessor :limit
+        # The results are in reverse chronological order by `created` or `posted_at`. The default is `created`.
+        attr_accessor :order_by
+        # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
+        attr_accessor :starting_after
+        # Only return Transactions that have the given status: `open`, `posted`, or `void`.
+        attr_accessor :status
+        # A filter for the `status_transitions.posted_at` timestamp. When using this filter, `status=posted` and `order_by=posted_at` must also be specified.
+        attr_accessor :status_transitions
+
+        def initialize(
+          created: nil,
+          ending_before: nil,
+          expand: nil,
+          financial_account: nil,
+          limit: nil,
+          order_by: nil,
+          starting_after: nil,
+          status: nil,
+          status_transitions: nil
+        )
+          @created = created
+          @ending_before = ending_before
+          @expand = expand
+          @financial_account = financial_account
+          @limit = limit
+          @order_by = order_by
+          @starting_after = starting_after
+          @status = status
+          @status_transitions = status_transitions
+        end
+      end
+      # Amount (in cents) transferred.
+      attr_reader :amount
+      # Change to a FinancialAccount's balance
+      attr_reader :balance_impact
+      # Time at which the object was created. Measured in seconds since the Unix epoch.
+      attr_reader :created
+      # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
+      attr_reader :currency
+      # An arbitrary string attached to the object. Often useful for displaying to users.
+      attr_reader :description
+      # A list of TransactionEntries that are part of this Transaction. This cannot be expanded in any list endpoints.
+      attr_reader :entries
+      # The FinancialAccount associated with this object.
+      attr_reader :financial_account
+      # ID of the flow that created the Transaction.
+      attr_reader :flow
+      # Details of the flow that created the Transaction.
+      attr_reader :flow_details
+      # Type of the flow that created the Transaction.
+      attr_reader :flow_type
+      # Unique identifier for the object.
+      attr_reader :id
+      # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
+      attr_reader :livemode
+      # String representing the object's type. Objects of the same type share the same value.
+      attr_reader :object
+      # Status of the Transaction.
+      attr_reader :status
+      # Attribute for field status_transitions
+      attr_reader :status_transitions
+
+      # Retrieves a list of Transaction objects.
+      def self.list(params = {}, opts = {})
+        request_stripe_object(
+          method: :get,
+          path: "/v1/treasury/transactions",
+          params: params,
+          opts: opts
+        )
+      end
+    end
+  end
+end

data/lib/stripe/resources/treasury/transaction_entry.rb

@@ -0,0 +1,178 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module Treasury
+    # TransactionEntries represent individual units of money movements within a single [Transaction](https://stripe.com/docs/api#transactions).
+    class TransactionEntry < APIResource
+      extend Stripe::APIOperations::List
+
+      OBJECT_NAME = "treasury.transaction_entry"
+      def self.object_name
+        "treasury.transaction_entry"
+      end
+
+      class BalanceImpact < Stripe::StripeObject
+        # The change made to funds the user can spend right now.
+        attr_reader :cash
+        # The change made to funds that are not spendable yet, but will become available at a later time.
+        attr_reader :inbound_pending
+        # The change made to funds in the account, but not spendable because they are being held for pending outbound flows.
+        attr_reader :outbound_pending
+      end
+
+      class FlowDetails < Stripe::StripeObject
+        # You can reverse some [ReceivedCredits](https://stripe.com/docs/api#received_credits) depending on their network and source flow. Reversing a ReceivedCredit leads to the creation of a new object known as a CreditReversal.
+        attr_reader :credit_reversal
+        # You can reverse some [ReceivedDebits](https://stripe.com/docs/api#received_debits) depending on their network and source flow. Reversing a ReceivedDebit leads to the creation of a new object known as a DebitReversal.
+        attr_reader :debit_reversal
+        # Use [InboundTransfers](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/into/inbound-transfers) to add funds to your [FinancialAccount](https://stripe.com/docs/api#financial_accounts) via a PaymentMethod that is owned by you. The funds will be transferred via an ACH debit.
+        #
+        # Related guide: [Moving money with Treasury using InboundTransfer objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/into/inbound-transfers)
+        attr_reader :inbound_transfer
+        # When an [issued card](https://stripe.com/docs/issuing) is used to make a purchase, an Issuing `Authorization`
+        # object is created. [Authorizations](https://stripe.com/docs/issuing/purchases/authorizations) must be approved for the
+        # purchase to be completed successfully.
+        #
+        # Related guide: [Issued card authorizations](https://stripe.com/docs/issuing/purchases/authorizations)
+        attr_reader :issuing_authorization
+        # Use [OutboundPayments](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-payments) to send funds to another party's external bank account or [FinancialAccount](https://stripe.com/docs/api#financial_accounts). To send money to an account belonging to the same user, use an [OutboundTransfer](https://stripe.com/docs/api#outbound_transfers).
+        #
+        # Simulate OutboundPayment state changes with the `/v1/test_helpers/treasury/outbound_payments` endpoints. These methods can only be called on test mode objects.
+        #
+        # Related guide: [Moving money with Treasury using OutboundPayment objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-payments)
+        attr_reader :outbound_payment
+        # Use [OutboundTransfers](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-transfers) to transfer funds from a [FinancialAccount](https://stripe.com/docs/api#financial_accounts) to a PaymentMethod belonging to the same entity. To send funds to a different party, use [OutboundPayments](https://stripe.com/docs/api#outbound_payments) instead. You can send funds over ACH rails or through a domestic wire transfer to a user's own external bank account.
+        #
+        # Simulate OutboundTransfer state changes with the `/v1/test_helpers/treasury/outbound_transfers` endpoints. These methods can only be called on test mode objects.
+        #
+        # Related guide: [Moving money with Treasury using OutboundTransfer objects](https://docs.stripe.com/docs/treasury/moving-money/financial-accounts/out-of/outbound-transfers)
+        attr_reader :outbound_transfer
+        # ReceivedCredits represent funds sent to a [FinancialAccount](https://stripe.com/docs/api#financial_accounts) (for example, via ACH or wire). These money movements are not initiated from the FinancialAccount.
+        attr_reader :received_credit
+        # ReceivedDebits represent funds pulled from a [FinancialAccount](https://stripe.com/docs/api#financial_accounts). These are not initiated from the FinancialAccount.
+        attr_reader :received_debit
+        # Type of the flow that created the Transaction. Set to the same value as `flow_type`.
+        attr_reader :type
+      end
+
+      class ListParams < Stripe::RequestParams
+        class Created < Stripe::RequestParams
+          # Minimum value to filter by (exclusive)
+          attr_accessor :gt
+          # Minimum value to filter by (inclusive)
+          attr_accessor :gte
+          # Maximum value to filter by (exclusive)
+          attr_accessor :lt
+          # Maximum value to filter by (inclusive)
+          attr_accessor :lte
+
+          def initialize(gt: nil, gte: nil, lt: nil, lte: nil)
+            @gt = gt
+            @gte = gte
+            @lt = lt
+            @lte = lte
+          end
+        end
+
+        class EffectiveAt < Stripe::RequestParams
+          # Minimum value to filter by (exclusive)
+          attr_accessor :gt
+          # Minimum value to filter by (inclusive)
+          attr_accessor :gte
+          # Maximum value to filter by (exclusive)
+          attr_accessor :lt
+          # Maximum value to filter by (inclusive)
+          attr_accessor :lte
+
+          def initialize(gt: nil, gte: nil, lt: nil, lte: nil)
+            @gt = gt
+            @gte = gte
+            @lt = lt
+            @lte = lte
+          end
+        end
+        # Only return TransactionEntries that were created during the given date interval.
+        attr_accessor :created
+        # Attribute for param field effective_at
+        attr_accessor :effective_at
+        # A cursor for use in pagination. `ending_before` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, starting with `obj_bar`, your subsequent call can include `ending_before=obj_bar` in order to fetch the previous page of the list.
+        attr_accessor :ending_before
+        # Specifies which fields in the response should be expanded.
+        attr_accessor :expand
+        # Returns objects associated with this FinancialAccount.
+        attr_accessor :financial_account
+        # A limit on the number of objects to be returned. Limit can range between 1 and 100, and the default is 10.
+        attr_accessor :limit
+        # The results are in reverse chronological order by `created` or `effective_at`. The default is `created`.
+        attr_accessor :order_by
+        # A cursor for use in pagination. `starting_after` is an object ID that defines your place in the list. For instance, if you make a list request and receive 100 objects, ending with `obj_foo`, your subsequent call can include `starting_after=obj_foo` in order to fetch the next page of the list.
+        attr_accessor :starting_after
+        # Only return TransactionEntries associated with this Transaction.
+        attr_accessor :transaction
+
+        def initialize(
+          created: nil,
+          effective_at: nil,
+          ending_before: nil,
+          expand: nil,
+          financial_account: nil,
+          limit: nil,
+          order_by: nil,
+          starting_after: nil,
+          transaction: nil
+        )
+          @created = created
+          @effective_at = effective_at
+          @ending_before = ending_before
+          @expand = expand
+          @financial_account = financial_account
+          @limit = limit
+          @order_by = order_by
+          @starting_after = starting_after
+          @transaction = transaction
+        end
+      end
+      # Change to a FinancialAccount's balance
+      attr_reader :balance_impact
+      # Time at which the object was created. Measured in seconds since the Unix epoch.
+      attr_reader :created
+      # Three-letter [ISO currency code](https://www.iso.org/iso-4217-currency-codes.html), in lowercase. Must be a [supported currency](https://stripe.com/docs/currencies).
+      attr_reader :currency
+      # When the TransactionEntry will impact the FinancialAccount's balance.
+      attr_reader :effective_at
+      # The FinancialAccount associated with this object.
+      attr_reader :financial_account
+      # Token of the flow associated with the TransactionEntry.
+      attr_reader :flow
+      # Details of the flow associated with the TransactionEntry.
+      attr_reader :flow_details
+      # Type of the flow associated with the TransactionEntry.
+      attr_reader :flow_type
+      # Unique identifier for the object.
+      attr_reader :id
+      # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
+      attr_reader :livemode
+      # String representing the object's type. Objects of the same type share the same value.
+      attr_reader :object
+      # The Transaction associated with this object.
+      attr_reader :transaction
+      # The specific money movement that generated the TransactionEntry.
+      attr_reader :type
+
+      # Retrieves a list of TransactionEntry objects.
+      def self.list(params = {}, opts = {})
+        request_stripe_object(
+          method: :get,
+          path: "/v1/treasury/transaction_entries",
+          params: params,
+          opts: opts
+        )
+      end
+
+      def self.resource_url
+        "/v1/treasury/transaction_entries"
+      end
+    end
+  end
+end

data/lib/stripe/resources/v2/amount.rb

@@ -0,0 +1,9 @@
+# frozen_string_literal: true
+
+module Stripe
+  module V2
+    class Amount
+      attr_reader :value, :currency
+    end
+  end
+end

data/lib/stripe/resources/v2/billing/meter_event.rb

@@ -0,0 +1,34 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module V2
+    module Billing
+      # Fix me empty_doc_string.
+      class MeterEvent < APIResource
+        OBJECT_NAME = "v2.billing.meter_event"
+        def self.object_name
+          "v2.billing.meter_event"
+        end
+
+        # The creation time of this meter event.
+        attr_reader :created
+        # The name of the meter event. Corresponds with the `event_name` field on a meter.
+        attr_reader :event_name
+        # A unique identifier for the event. If not provided, one will be generated. We recommend using a globally unique identifier for this. We’ll enforce uniqueness within a rolling 24 hour period.
+        attr_reader :identifier
+        # String representing the object's type. Objects of the same type share the same value of the object field.
+        attr_reader :object
+        # The payload of the event. This must contain the fields corresponding to a meter’s
+        # `customer_mapping.event_payload_key` (default is `stripe_customer_id`) and
+        # `value_settings.event_payload_key` (default is `value`). Read more about the payload.
+        attr_reader :payload
+        # The time of the event. Must be within the past 35 calendar days or up to
+        # 5 minutes in the future. Defaults to current timestamp if not specified.
+        attr_reader :timestamp
+        # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
+        attr_reader :livemode
+      end
+    end
+  end
+end

data/lib/stripe/resources/v2/billing/meter_event_adjustment.rb

@@ -0,0 +1,36 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module V2
+    module Billing
+      class MeterEventAdjustment < APIResource
+        OBJECT_NAME = "v2.billing.meter_event_adjustment"
+        def self.object_name
+          "v2.billing.meter_event_adjustment"
+        end
+
+        class Cancel < Stripe::StripeObject
+          # Unique identifier for the event. You can only cancel events within 24 hours of Stripe receiving them.
+          attr_reader :identifier
+        end
+        # Specifies which event to cancel.
+        attr_reader :cancel
+        # The time the adjustment was created.
+        attr_reader :created
+        # The name of the meter event. Corresponds with the `event_name` field on a meter.
+        attr_reader :event_name
+        # The unique id of this meter event adjustment.
+        attr_reader :id
+        # String representing the object's type. Objects of the same type share the same value of the object field.
+        attr_reader :object
+        # Open Enum. The meter event adjustment’s status.
+        attr_reader :status
+        # Open Enum. Specifies whether to cancel a single event or a range of events for a time period. Time period cancellation is not supported yet.
+        attr_reader :type
+        # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
+        attr_reader :livemode
+      end
+    end
+  end
+end

data/lib/stripe/resources/v2/billing/meter_event_session.rb

@@ -0,0 +1,29 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module V2
+    module Billing
+      class MeterEventSession < APIResource
+        OBJECT_NAME = "v2.billing.meter_event_session"
+        def self.object_name
+          "v2.billing.meter_event_session"
+        end
+
+        # The authentication token for this session.  Use this token when calling the
+        # high-throughput meter event API.
+        attr_reader :authentication_token
+        # The creation time of this session.
+        attr_reader :created
+        # The time at which this session will expire.
+        attr_reader :expires_at
+        # The unique id of this auth session.
+        attr_reader :id
+        # String representing the object's type. Objects of the same type share the same value of the object field.
+        attr_reader :object
+        # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
+        attr_reader :livemode
+      end
+    end
+  end
+end

data/lib/stripe/resources/v2/event.rb

@@ -0,0 +1,41 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module V2
+    # Events are generated to keep you informed of activity in your business account. APIs in the /v2 namespace generate [thin events](https://docs.stripe.com/event-destinations#benefits-of-thin-events) which have small, unversioned payloads that include a reference to the ID of the object that has changed. The Events v2 API returns these new thin events. [Retrieve the event object](https://docs.stripe.com/event-destinations#fetch-data) for additional data about the event. Use the related object ID in the event payload to [fetch the API resource](https://docs.stripe.com/event-destinations#retrieve-the-object-associated-with-thin-events) of the object associated with the event. Comparatively, events generated by most API v1 include a versioned snapshot of an API object in their payload.
+    class Event < APIResource
+      OBJECT_NAME = "v2.core.event"
+      def self.object_name
+        "v2.core.event"
+      end
+
+      class Reason < Stripe::StripeObject
+        class Request < Stripe::StripeObject
+          # ID of the API request that caused the event.
+          attr_reader :id
+          # The idempotency key transmitted during the request.
+          attr_reader :idempotency_key
+        end
+        # Event reason type.
+        attr_reader :type
+        # Information on the API request that instigated the event.
+        attr_reader :request
+      end
+      # Authentication context needed to fetch the event or related object.
+      attr_reader :context
+      # Time at which the object was created.
+      attr_reader :created
+      # Unique identifier for the event.
+      attr_reader :id
+      # String representing the object's type. Objects of the same type share the same value of the object field.
+      attr_reader :object
+      # Reason for the event.
+      attr_reader :reason
+      # The type of the event.
+      attr_reader :type
+      # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
+      attr_reader :livemode
+    end
+  end
+end

data/lib/stripe/resources/v2/event_destination.rb

@@ -0,0 +1,73 @@
+# File generated from our OpenAPI spec
+# frozen_string_literal: true
+
+module Stripe
+  module V2
+    # Set up an event destination to receive events from Stripe across multiple destination types, including [webhook endpoints](https://docs.stripe.com/webhooks) and [Amazon EventBridge](https://docs.stripe.com/event-destinations/eventbridge). Event destinations support receiving [thin events](https://docs.stripe.com/api/v2/events) and [snapshot events](https://docs.stripe.com/api/events).
+    class EventDestination < APIResource
+      OBJECT_NAME = "v2.core.event_destination"
+      def self.object_name
+        "v2.core.event_destination"
+      end
+
+      class StatusDetails < Stripe::StripeObject
+        class Disabled < Stripe::StripeObject
+          # Reason event destination has been disabled.
+          attr_reader :reason
+        end
+        # Details about why the event destination has been disabled.
+        attr_reader :disabled
+      end
+
+      class AmazonEventbridge < Stripe::StripeObject
+        # The AWS account ID.
+        attr_reader :aws_account_id
+        # The ARN of the AWS event source.
+        attr_reader :aws_event_source_arn
+        # The state of the AWS event source.
+        attr_reader :aws_event_source_status
+      end
+
+      class WebhookEndpoint < Stripe::StripeObject
+        # The signing secret of the webhook endpoint, only includable on creation.
+        attr_reader :signing_secret
+        # The URL of the webhook endpoint, includable.
+        attr_reader :url
+      end
+      # Time at which the object was created.
+      attr_reader :created
+      # An optional description of what the event destination is used for.
+      attr_reader :description
+      # The list of events to enable for this endpoint.
+      attr_reader :enabled_events
+      # Payload type of events being subscribed to.
+      attr_reader :event_payload
+      # Where events should be routed from.
+      attr_reader :events_from
+      # Unique identifier for the object.
+      attr_reader :id
+      # Metadata.
+      attr_reader :metadata
+      # Event destination name.
+      attr_reader :name
+      # String representing the object's type. Objects of the same type share the same value of the object field.
+      attr_reader :object
+      # If using the snapshot event payload, the API version events are rendered as.
+      attr_reader :snapshot_api_version
+      # Status. It can be set to either enabled or disabled.
+      attr_reader :status
+      # Additional information about event destination status.
+      attr_reader :status_details
+      # Event destination type.
+      attr_reader :type
+      # Time at which the object was last updated.
+      attr_reader :updated
+      # Has the value `true` if the object exists in live mode or the value `false` if the object exists in test mode.
+      attr_reader :livemode
+      # Amazon EventBridge configuration.
+      attr_reader :amazon_eventbridge
+      # Webhook endpoint configuration.
+      attr_reader :webhook_endpoint
+    end
+  end
+end