steak 0.3.1 → 0.3.3

data/MIT-LICENSE

@@ -0,0 +1,20 @@
+Copyright (c) 2009 Luismi Cavallé
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE
+LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
+OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
+WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

data/README.rdoc

@@ -36,15 +36,16 @@ If you are not in Rails but use RSpec, then Steak is just some aliases providing
 
 == Getting started
 
+<em><b>NOTE:</b> Please note that the stable version of Steak only works with Rails 2.x and RSpec 1.x. If you want to try with Rails 3 or RSpec 2, then you can install the prerelease version of Steak (using <tt>gem install steak --pre</tt>) which is based on the experimental <tt>rails3</tt> branch.</em>
+
 === Not in Rails
 
 Just install and require the damned gem!
 
-  $ [sudo] gem install steak
+  $ gem install steak
 
 Then in your spec or spec helper:
 
-  require 'rubygems'
   require 'steak'
   
 That's all. You don't really need to require RSpec.
@@ -57,7 +58,7 @@ Assuming you have already setup rspec-rails, add this to your project's <tt>conf
   
 Install the gem from the command line:
   
-  $ [sudo] RAILS_ENV=test rake gems:install
+  $ RAILS_ENV=test rake gems:install
   
 Run the generator:
 

data/Rakefile

@@ -0,0 +1,76 @@
+require "rubygems"
+require "rake/gempackagetask"
+require "rake/rdoctask"
+
+require "spec"
+require "spec/rake/spectask"
+Spec::Rake::SpecTask.new do |t|
+  t.spec_opts = %w(--format specdoc --colour)
+  t.libs = ["spec"]
+end
+
+
+task :default => ["spec"]
+
+# This builds the actual gem. For details of what all these options
+# mean, and other ones you can add, check the documentation here:
+#
+#   http://rubygems.org/read/chapter/20
+#
+spec = Gem::Specification.new do |s|
+
+  # Change these as appropriate
+  s.name              = "steak"
+  s.version           = "0.3.3"
+  s.summary           = "If you are not in Rails but use RSpec, then Steak is just some aliases providing you with the language of acceptance testing (feature, scenario, background). If you are in Rails, you also have a couple of generators, a rake task and full Rails integration testing (meaning Webrat support, for instance)"
+  s.description       = "Minimalist acceptance testing on top of RSpec"
+  s.author            = "Luismi Cavallé"
+  s.email             = "luismi@lmcavalle.com"
+  s.homepage          = "http://github.com/cavalle/steak"
+
+  s.has_rdoc          = true
+  s.extra_rdoc_files  = %w(README.rdoc)
+  s.rdoc_options      = %w(--main README.rdoc)
+
+  # Add any extra files to include in the gem
+  s.files             = %w(init.rb MIT-LICENSE Rakefile README.rdoc) + Dir.glob("{spec,lib/**/*}")
+  s.require_paths     = ["lib"]
+
+  # If you want to depend on other gems, add them here, along with any
+  # relevant versions
+  # s.add_dependency("some_other_gem", "~> 0.1.0")
+
+  # If your tests use any gems, include them here
+  s.add_development_dependency("rspec")
+end
+
+# This task actually builds the gem. We also regenerate a static
+# .gemspec file, which is useful if something (i.e. GitHub) will
+# be automatically building a gem for this project. If you're not
+# using GitHub, edit as appropriate.
+#
+# To publish your gem online, install the 'gemcutter' gem; Read more 
+# about that here: http://gemcutter.org/pages/gem_docs
+Rake::GemPackageTask.new(spec) do |pkg|
+  pkg.gem_spec = spec
+end
+
+desc "Build the gemspec file #{spec.name}.gemspec"
+task :gemspec do
+  file = File.dirname(__FILE__) + "/#{spec.name}.gemspec"
+  File.open(file, "w") {|f| f << spec.to_ruby }
+end
+
+task :package => :gemspec
+
+# Generate documentation
+Rake::RDocTask.new do |rd|
+  rd.main = "README.rdoc"
+  rd.rdoc_files.include("README.rdoc", "lib/**/*.rb")
+  rd.rdoc_dir = "rdoc"
+end
+
+desc 'Clear out RDoc and generated packages'
+task :clean => [:clobber_rdoc, :clobber_package] do
+  rm "#{spec.name}.gemspec"
+end

data/init.rb

@@ -0,0 +1,8 @@
+# Placeholder to satisfy Rails.
+#
+# Do NOT add any require statements to this file. Doing
+# so will cause Rails to load this plugin all of the time.
+#
+# spec/acceptance/acceptance_helper.rb should include the necessary
+# require statements and configuration. This file should
+# be required by all of your acceptance specs.

metadata

@@ -1,7 +1,12 @@
 --- !ruby/object:Gem::Specification 
 name: steak
 version: !ruby/object:Gem::Version 
-  version: 0.3.1
+  prerelease: false
+  segments: 
+  - 0
+  - 3
+  - 3
+  version: 0.3.3
 platform: ruby
 authors: 
 - "Luismi Cavall\xC3\xA9"
@@ -9,19 +14,21 @@ autorequire:
 bindir: bin
 cert_chain: []
 
-date: 2010-01-02 00:00:00 +01:00
+date: 2010-05-01 00:00:00 +02:00
 default_executable: 
 dependencies: 
 - !ruby/object:Gem::Dependency 
   name: rspec
-  type: :runtime
-  version_requirement: 
-  version_requirements: !ruby/object:Gem::Requirement 
+  prerelease: false
+  requirement: &id001 !ruby/object:Gem::Requirement 
     requirements: 
     - - ">="
       - !ruby/object:Gem::Version 
+        segments: 
+        - 0
         version: "0"
-    version: 
+  type: :development
+  version_requirements: *id001
 description: Minimalist acceptance testing on top of RSpec
 email: luismi@lmcavalle.com
 executables: []
@@ -31,16 +38,10 @@ extensions: []
 extra_rdoc_files: 
 - README.rdoc
 files: 
+- init.rb
+- MIT-LICENSE
+- Rakefile
 - README.rdoc
-- generators/acceptance_spec/USAGE
-- generators/acceptance_spec/acceptance_spec_generator.rb
-- generators/acceptance_spec/templates/acceptance_spec.rb
-- generators/steak/USAGE
-- generators/steak/steak_generator.rb
-- generators/steak/templates/acceptance_helper.rb
-- generators/steak/templates/helpers.rb
-- generators/steak/templates/paths.rb
-- generators/steak/templates/steak.rake
 - lib/steak.rb
 has_rdoc: true
 homepage: http://github.com/cavalle/steak
@@ -48,31 +49,30 @@ licenses: []
 
 post_install_message: 
 rdoc_options: 
-- --charset=UTF-8
+- --main
+- README.rdoc
 require_paths: 
 - lib
 required_ruby_version: !ruby/object:Gem::Requirement 
   requirements: 
   - - ">="
     - !ruby/object:Gem::Version 
+      segments: 
+      - 0
       version: "0"
-  version: 
 required_rubygems_version: !ruby/object:Gem::Requirement 
   requirements: 
   - - ">="
     - !ruby/object:Gem::Version 
+      segments: 
+      - 0
       version: "0"
-  version: 
 requirements: []
 
 rubyforge_project: 
-rubygems_version: 1.3.5
+rubygems_version: 1.3.6
 signing_key: 
 specification_version: 3
 summary: If you are not in Rails but use RSpec, then Steak is just some aliases providing you with the language of acceptance testing (feature, scenario, background). If you are in Rails, you also have a couple of generators, a rake task and full Rails integration testing (meaning Webrat support, for instance)
-test_files: 
-- spec/acceptance/acceptance_helper.rb
-- spec/acceptance/acceptance_spec_generator_spec.rb
-- spec/acceptance/basic_spec.rb
-- spec/acceptance/rails_spec.rb
-- spec/acceptance/steak_generator_spec.rb
+test_files: []
+

data/generators/acceptance_spec/acceptance_spec_generator.rb

@@ -1,9 +0,0 @@
-class AcceptanceSpecGenerator < Rails::Generator::NamedBase
-  def manifest
-    record do |m|
-      m.directory File.join('spec/acceptance', class_path)
-      file_name.gsub!(/_spec$/,"")
-      m.template 'acceptance_spec.rb', File.join('spec/acceptance', class_path, "#{file_name}_spec.rb")
-    end
-  end
-end

data/generators/acceptance_spec/templates/acceptance_spec.rb

@@ -1,13 +0,0 @@
-require File.dirname(__FILE__) + '/acceptance_helper'
-
-feature "Feature name", %q{
-  In order to ...
-  As a ...
-  I want to ...
-} do
-  
-  scenario "Scenario name" do
-    true.should == true
-  end
-  
-end

data/generators/steak/USAGE

@@ -1,8 +0,0 @@
-Description:
-    Sets up Steak in your Rails project. This will generate the spec/acceptance directory
-    and the necessary files.
-    
-    If you haven't already, You should also run `./script/generate rspec` to complete the set up.
-    
-Examples:
-    `./script/generate steak`

data/generators/steak/steak_generator.rb

@@ -1,12 +0,0 @@
-class SteakGenerator < Rails::Generator::Base
-  def manifest
-    record do |m|
-      m.directory 'spec/acceptance/support'
-      m.directory 'lib/tasks'
-      m.file "acceptance_helper.rb", "spec/acceptance/acceptance_helper.rb"
-      m.file "helpers.rb",           "spec/acceptance/support/helpers.rb"
-      m.file "paths.rb",             "spec/acceptance/support/paths.rb"
-      m.file "steak.rake",          "lib/tasks/steak.rake"
-    end
-  end
-end

data/generators/steak/templates/acceptance_helper.rb

@@ -1,10 +0,0 @@
-require File.dirname(__FILE__) + "/../spec_helper"
-require "steak"
-require "webrat"
-
-Webrat.configure do |config|
-  config.mode = :rails
-end
-
-# Put your acceptance spec helpers inside /spec/acceptance/support
-Dir["#{File.dirname(__FILE__)}/support/**/*.rb"].each {|f| require f}

data/generators/steak/templates/helpers.rb

@@ -1,6 +0,0 @@
-module HelperMethods
-  # Put here any helper method you need to be available in all your acceptance tests
-  
-end
-
-Spec::Runner.configuration.include(HelperMethods)

data/generators/steak/templates/paths.rb

@@ -1,9 +0,0 @@
-module NavigationHelpers
-  # Put here the helper methods related to the paths of your applications
-  
-  def homepage
-    "/"
-  end
-end
-
-Spec::Runner.configuration.include(NavigationHelpers)

data/generators/steak/templates/steak.rake

@@ -1,9 +0,0 @@
-load File.dirname(__FILE__) + '/rspec.rake'
-
-namespace :spec do
-  desc "Run the code examples in spec/acceptance"
-  Spec::Rake::SpecTask.new(:acceptance => "db:test:prepare") do |t|
-    t.spec_opts = ['--options', "\"#{RAILS_ROOT}/spec/spec.opts\""]
-    t.spec_files = FileList["spec/acceptance/**/*_spec.rb"]
-  end
-end

data/spec/acceptance/acceptance_helper.rb

@@ -1,51 +0,0 @@
-require 'rubygems'
-require 'spec'
-require File.dirname(__FILE__) + "/../../lib/steak"
-require 'tempfile'
-
-module Factories
-  def create_spec(options)
-    options = {:content => options} unless options.is_a?(Hash)
-    path = (options[:path] || Dir.tmpdir) + "/#{String.random}_spec.rb"
-    File.open(path, "w") do |file|
-      file.write options[:content]
-    end
-    path
-  end
-  
-  def create_rails_app(options = {})
-    path = Dir.tmpdir + "rails_app_#{String.random}"
-    FileUtils.rm_rf path
-    `rails #{path}`
-    File.open(path + "/config/environments/test.rb", "a") do |file|
-      file.write "\nconfig.gem 'rspec-rails', :lib => false\n"
-    end
-    FileUtils.cp_r File.dirname(__FILE__) + "/../../", path + "/vendor/plugins/steak"
-    
-    unless options[:setup_steak] == false
-      Dir.chdir path do
-        `script/generate rspec`
-        `script/generate steak`
-      end
-    end
-    
-    path
-  end
-  
-end
-
-module HelperMethods
-  def run_spec(file_path)
-    `spec #{file_path} 2>&1`
-  end
-end
-
-class String
-  CHARS = ('a'..'z').to_a + ('A'..'Z').to_a
-  def self.random(size = 8)
-    (0..size).map{ CHARS[rand(CHARS.length)] }.join
-  end
-end
-
-Spec::Runner.configuration.include(Factories)
-Spec::Runner.configuration.include(HelperMethods)

data/spec/acceptance/acceptance_spec_generator_spec.rb

@@ -1,45 +0,0 @@
-require File.dirname(__FILE__) + "/acceptance_helper.rb"
-
-feature "Acceptance spec generator for rails", %q{
-  In order to quickly add a new acceptance spec
-  As a developer
-  I want to run a generator that creates it for me
-} do
-  
-  background do
-    @rails_app = create_rails_app
-  end
-  
-  scenario "Adding new acceptance spec" do
-    Dir.chdir @rails_app do
-      `script/generate acceptance_spec document_creation`
-    end
-  
-    File.exist?(@rails_app + "/spec/acceptance/document_creation_spec.rb").should be_true
-  end
-  
-  scenario "Adding new acceptance spec (plural name)" do
-    Dir.chdir @rails_app do
-      `script/generate acceptance_spec creating_documents`
-    end
-  
-    File.exist?(@rails_app + "/spec/acceptance/creating_documents_spec.rb").should be_true
-  end
-  
-  scenario "Adding new acceptance spec (pascalized name)" do
-    Dir.chdir @rails_app do
-      `script/generate acceptance_spec DocumentCreation`
-    end
-  
-    File.exist?(@rails_app + "/spec/acceptance/document_creation_spec.rb").should be_true
-  end
-  
-  scenario "Adding new acceptance spec (name ending with _spec)" do
-    Dir.chdir @rails_app do
-      `script/generate acceptance_spec document_creation_spec`
-    end
-  
-    File.exist?(@rails_app + "/spec/acceptance/document_creation_spec.rb").should be_true
-  end
-
-end

data/spec/acceptance/basic_spec.rb

@@ -1,51 +0,0 @@
-require File.dirname(__FILE__) + "/acceptance_helper.rb"
-
-feature "Acceptance spec execution", %q{
-  In order to write better software
-  As a ruby developer
-  I want to execute acceptance specs
-} do
-  
-  scenario "Minimal acceptance spec" do
-    spec_file = create_spec <<-SPEC
-      require '#{File.dirname(__FILE__) + "/../../lib/steak"}'  
-      feature "Minimal spec" do
-        scenario "First scenario" do
-          true.should be_true
-        end
-      end
-    SPEC
-    output = run_spec spec_file
-    output.should =~ /1 example, 0 failures/
-  end
-  
-  scenario "Minimal acceptance spec that fails" do
-    spec_file = create_spec <<-SPEC
-      require '#{File.dirname(__FILE__) + "/../../lib/steak"}'  
-      feature "Minimal spec" do
-        scenario "First scenario" do
-          true.should be_false
-        end
-      end
-    SPEC
-    output = run_spec spec_file
-    output.should =~ /1 example, 1 failure/
-  end
-  
-  scenario "Acceptance spec with background" do
-    spec_file = create_spec <<-SPEC
-      require '#{File.dirname(__FILE__) + "/../../lib/steak"}'  
-      feature "Minimal spec" do
-        background do
-          @value = 17
-        end
-        scenario "First scenario" do
-          @value.should == 17
-        end
-      end
-    SPEC
-    output = run_spec spec_file
-    output.should =~ /1 example, 0 failures/
-  end
-  
-end

data/spec/acceptance/rails_spec.rb

@@ -1,41 +0,0 @@
-require File.dirname(__FILE__) + "/acceptance_helper.rb"
-
-feature "Acceptance spec execution", %q{
-  In order to write better web apps
-  As a rails developer
-  I want to execute acceptance specs
-} do
-  
-  scenario "Minimal acceptance spec" do
-    rails_app = create_rails_app
-    spec_file = create_spec :path    => rails_app + "/spec/acceptance", 
-                            :content => <<-SPEC
-      require File.dirname(__FILE__) + "/acceptance_helper.rb"
-      feature "Minimal spec" do
-        scenario "First scenario" do
-          RAILS_ENV.should_not be_empty
-          RAILS_ENV.should == "test"
-        end
-      end
-    SPEC
-    output = run_spec spec_file
-    output.should =~ /1 example, 0 failures/
-  end
-  
-  scenario "Integration stuff" do
-    rails_app = create_rails_app
-    spec_file = create_spec :path    => rails_app + "/spec/acceptance", 
-                            :content => <<-SPEC
-      require File.dirname(__FILE__) + "/acceptance_helper.rb"
-      feature "Minimal spec" do
-        scenario "First scenario" do
-          get "/"
-          response.should have_text(/No route matches/)
-        end
-      end
-    SPEC
-    output = run_spec spec_file
-    output.should =~ /1 example, 0 failures/
-  end
-  
-end

data/spec/acceptance/steak_generator_spec.rb

@@ -1,24 +0,0 @@
-require File.dirname(__FILE__) + "/acceptance_helper.rb"
-
-feature "Steak generator for rails", %q{
-  In order to quickly start to hack my rails project with steak
-  As a developer
-  I want to run a generator that sets everything up for me
-} do
-  
-  scenario "Running generator in an empty project" do
-  
-    rails_app = create_rails_app(:setup_steak => false)
-  
-    Dir.chdir rails_app do
-      `script/generate steak`
-    end
-  
-    File.exist?(rails_app + "/spec/acceptance/acceptance_helper.rb").should be_true
-    File.exist?(rails_app + "/spec/acceptance/support/helpers.rb").should be_true
-    File.exist?(rails_app + "/spec/acceptance/support/paths.rb").should be_true
-    File.exist?(rails_app + "/lib/tasks/steak.rake").should be_true
-    
-  end
-  
-end