spreewald 0.3.2 → 0.3.3

data/README.md

@@ -28,11 +28,12 @@ Alternatively, you can require everything by doing
 
     require 'spreewald/all_steps'
 
+
 ## Waiting for page load
 
-Spreewald's web steps are all aware, that you might run them with a Selenium/Capybara webdriver, and wait for the browser to finish loading the page, if necessary.
+Spreewald's web steps are all aware that you might run them with a Selenium/Capybara webdriver, and wait for the browser to finish loading the page, if necessary.
 
-This is done, by rerunning any assertions until they suceed, or a timeout is reached.
+This is done by rerunning any assertions until they suceed or a timeout is reached.
 
 You can achieve this in your own steps by wrapping them inside a `patiently do` block, like
 
@@ -44,11 +45,15 @@ You can achieve this in your own steps by wrapping them inside a `patiently do`
 
 More info [here](https://makandracards.com/makandra/12139-waiting-for-page-load-with-spreewald).
 
+## This README
+
+The "Steps" section is autogenerated by `rake update_readme` from comments in the step definitions.
+
+
 ## Steps
 
 ### development_steps.rb
 
-Marks scenario as pending
 
 * **Then it should work**
 
@@ -77,13 +82,13 @@ Marks scenario as pending
 
 * **When I clear my e?mails**
 
-  
+
 
 
 * **Then (an|no) e?mail should have been sent with:**
 
   Example:
-  
+
         Then an email should have been sent with:
           """
           From: max.mustermann@example.com
@@ -92,7 +97,7 @@ Marks scenario as pending
           Body: ...
           Attachments: ...
           """
-  
+
   You can skip lines, of course.
 
 
@@ -103,7 +108,7 @@ Marks scenario as pending
 
 * **Then no e?mail should have been sent**
 
-  
+
 
 
 * **Then I should see "..." in the e?mail**
@@ -119,9 +124,9 @@ Marks scenario as pending
 * **Then that e?mail should have the following lines in the body:**
 
   Only works after you've retrieved the email using "Then an email should have been sent with:"
-  
+
   Example:
-  
+
         And that mail should have the following lines in the body:
           """
           All of these lines
@@ -144,7 +149,7 @@ See [this article](https://makandracards.com/makandra/763-cucumber-step-to-match
 
 * **Then I should( not)? see a table with the following rows( in any order)?**
 
-  
+
 
 
 
@@ -157,7 +162,7 @@ See [this article](https://makandracards.com/makandra/1222-useful-cucumber-steps
 * **When the (date|time) is "(\d{4}-\d{2}-\d{2}( \d{1,2}:\d{2})?)"**
 
   Example:
-  
+
         Given the date is "2012-02-10"
         Given the time is "2012-02-10 13:40"
 
@@ -165,14 +170,14 @@ See [this article](https://makandracards.com/makandra/1222-useful-cucumber-steps
 * **When the time is "(\d{1,2}:\d{2})"**
 
   Example:
-  
+
         Given the time is "13:40"
 
 
 * **When it is (\d+|a|some|a few) (seconds?|minutes?|hours?|days?|weeks?|months?|years?) (later|earlier)**
 
   Example:
-  
+
         When it is 10 minutes later
         When it is a few hours earlier
 
@@ -180,7 +185,7 @@ See [this article](https://makandracards.com/makandra/1222-useful-cucumber-steps
 
 ### web_steps.rb
 
-Most of cucumber-rails' original web steps plus a few of our own. 
+Most of cucumber-rails' original web steps plus a few of our own.
 
 Note that cucumber-rails deprecated all its steps quite a while ago with the following
 deprecation notice. Decide for yourself whether you want to use them:
@@ -205,30 +210,31 @@ deprecation notice. Decide for yourself whether you want to use them:
 
 * **When ... within (.*[^:])**
 
-  You can append 'within [selector]' to any other web step
+  You can append 'within [selector]' to any other web step.
+
   Example:
-  
+
         Then I should see "some text" within ".page_body"
 
 
 * **Given I am on ...**
 
-  
+
 
 
 * **When I go to ...**
 
-  
+
 
 
 * **When I press "..."**
 
-  
+
 
 
 * **When I follow "..."**
 
-  
+
 
 
 * **When I fill in "..." (with|for) "..."**
@@ -263,31 +269,31 @@ deprecation notice. Decide for yourself whether you want to use them:
 
 * **When I attach the file "..." to "..."**
 
-  
+
 
 
 * **Then I should see "..."**
 
   Checks that some text appears on the page
-  
+
   Note that this does not detect if the text might be hidden via CSS
 
 
 * **Then I should see \/([^\/]*)\/**
 
   Checks that a regexp appears on the page
-  
+
   Note that this does not detect if the text might be hidden via CSS
 
 
 * **Then I should not see "..."**
 
-  
+
 
 
 * **Then I should not see \/([^\/]*)\/**
 
-  
+
 
 
 * **Then the "..." field( within ...)? should contain "..."**
@@ -297,7 +303,7 @@ deprecation notice. Decide for yourself whether you want to use them:
 
 * **Then the "..." field( within ...)? should not contain "..."**
 
-  
+
 
 
 * **Then the "..." field should have the error "..."**
@@ -307,32 +313,32 @@ deprecation notice. Decide for yourself whether you want to use them:
 
 * **Then the "..." field should( not)? have an error**
 
-  
+
 
 
 * **Then the "..." field should have no error**
 
-  
+
 
 
 * **Then the radio button "..." should( not)? be (checked|selected)**
 
-  
+
 
 
 * **Then I should be on ...**
 
-  
+
 
 
 * **Then I should have the following query string:**
 
   Example:
-  
+
         I should have the following query string:
           | locale        | de  |
           | currency_code | EUR |
-  
+
   Succeeds when the URL contains the given "locale" and "currency_code" params
 
 
@@ -349,9 +355,9 @@ deprecation notice. Decide for yourself whether you want to use them:
 * **Then I should( not)? see the (number|amount) ([\-\d,\.]+)( (.*?))?**
 
   Better way to test for a number of money amount than a `Then I should see`
-  
+
   Checks that there is unexpected minus sign, decimal places etc.
-  
+
   See [here](https://makandracards.com/makandra/1225-test-that-a-number-or-money-amount-is-shown-with-cucumber) for details
 
 
@@ -372,7 +378,7 @@ deprecation notice. Decide for yourself whether you want to use them:
 
 * **Then nothing should be selected for "..."?**
 
-  
+
 
 
 * **Then "..." should( not)? be an option for "..."**
@@ -392,7 +398,7 @@ deprecation notice. Decide for yourself whether you want to use them:
 
 * **Then I should not see "..." in the HTML**
 
-  
+
 
 
 * **Then I should see an error**
@@ -402,7 +408,7 @@ deprecation notice. Decide for yourself whether you want to use them:
 
 * **When I reload the page**
 
-  
+
 
 
 * **Then "..." should( not)? be visible**
@@ -410,7 +416,7 @@ deprecation notice. Decide for yourself whether you want to use them:
   Checks that an element is actually visible, also considering styles
   Within a selenium test, the browser is asked whether the element is really visible
   In a non-selenium test, we only check for ".hidden", ".invisible" or "style: display:none"
-  
+
   More details [here](https://makandracards.com/makandra/1049-capybara-check-that-a-page-element-is-hidden-via-css)
 
 
@@ -422,7 +428,7 @@ deprecation notice. Decide for yourself whether you want to use them:
 * **Then I should (not )?see an element "..."**
 
   Example:
-  
+
         Then I should see an element ".page .container"
 
 
@@ -436,44 +442,44 @@ deprecation notice. Decide for yourself whether you want to use them:
 
   Click a link within an element matching the given selector. Will try to be clever
   and disregard elements that don't contain a matching link.
-  
+
   Example:
-  
+
         When I follow "Read more" inside any ".text_snippet"
 
 
 
 * **Then I should( not)? see "..." inside any "..."**
 
-  
+
 
 
 * **When I fill in "..." with "..." inside any "..."**
 
-  
+
 
 
 * **When I confirm the browser dialog**
 
-  
+
 
 
 * **When I cancel the browser dialog**
 
-  
+
 
 
 * **When I enter "..." into the browser dialog**
 
-  
+
 
 
 * **Then I should see in this order:?**
 
   Checks that these strings are rendered in the given order in a single line or in multiple lines
-  
+
   Example:
-  
+
         Then I should see in this order:
           | Alpha Group |
           | Augsburg    |

data/Rakefile

@@ -2,6 +2,7 @@
 require "bundler/gem_tasks"
 
 
+desc 'Update the "Steps" section of the README'
 task "update_readme" do
   require 'support/documentation_generator'
   readme = File.read('README.md')

data/lib/spreewald/development_steps.rb

@@ -8,6 +8,7 @@ end
 # Starts debugger
 Then /^debugger$/ do
   debugger
+  true # Ruby will halt in this line
 end
 
 # Waits 2 seconds after each step

data/lib/spreewald_support/version.rb

@@ -1,5 +1,5 @@
 # coding: UTF-8
 
 module Spreewald
-  VERSION = "0.3.2"
+  VERSION = "0.3.3"
 end

metadata

@@ -1,13 +1,13 @@
 --- !ruby/object:Gem::Specification 
 name: spreewald
 version: !ruby/object:Gem::Version 
-  hash: 23
+  hash: 21
   prerelease: 
   segments: 
   - 0
   - 3
-  - 2
-  version: 0.3.2
+  - 3
+  version: 0.3.3
 platform: ruby
 authors: 
 - Tobias Kraze
@@ -15,7 +15,7 @@ autorequire:
 bindir: bin
 cert_chain: []
 
-date: 2012-11-13 00:00:00 +01:00
+date: 2012-11-21 00:00:00 +01:00
 default_executable: 
 dependencies: 
 - !ruby/object:Gem::Dependency