soey-geokit 1.2.4

data/Manifest.txt

@@ -0,0 +1,19 @@
+.project
+Manifest.txt
+README.markdown
+Rakefile
+geokit.gemspec
+lib/geokit.rb
+lib/geokit/geocoders.rb
+lib/geokit/mappable.rb
+test/test_base_geocoder.rb
+test/test_bounds.rb
+test/test_ca_geocoder.rb
+test/test_geoloc.rb
+test/test_google_geocoder.rb
+test/test_google_reverse_geocoder.rb
+test/test_ipgeocoder.rb
+test/test_latlng.rb
+test/test_multi_geocoder.rb
+test/test_us_geocoder.rb
+test/test_yahoo_geocoder.rb

data/README.markdown

@@ -0,0 +1,166 @@
+## GEOKIT GEM DESCRIPTION
+
+The Geokit gem provides:
+
+ * Distance calculations between two points on the earth. Calculate the distance in miles, kilometers, or nautical miles, with all the trigonometry abstracted away by GeoKit.
+ * Geocoding from multiple providers. It supports Google, Yahoo, Geocoder.us, and Geocoder.ca geocoders, and others. It provides a uniform response structure from all of them. 
+   It also provides a fail-over mechanism, in case your input fails to geocode in one service.
+ * Rectangular bounds calculations: is a point within a given rectangular bounds?
+ * Heading and midpoint calculations
+
+Combine this with gem with the [geokit-rails plugin](http://github.com/andre/geokit-rails/tree/master) to get location-based finders for your Rails app.
+
+* Geokit Documentation at Rubyforge [http://geokit.rubyforge.org](http://geokit.rubyforge.org).
+* Repository at Github: [http://github.com/andre/geokit-gem/tree/master](http://github.com/andre/geokit-gem/tree/master).
+
+## INSTALL
+
+    gem sources -a http://gems.github.com
+    sudo gem install andre-geokit
+
+## QUICK START
+
+		irb> require 'rubygems'
+		irb> require 'geokit'
+		irb> a=Geokit::Geocoders::YahooGeocoder.geocode '140 Market St, San Francisco, CA'
+		irb> a.ll
+		 => 37.79363,-122.396116
+		irb> b=Geokit::Geocoders::YahooGeocoder.geocode '789 Geary St, San Francisco, CA'
+		irb> b.ll
+		 => 37.786217,-122.41619
+		irb> a.distance_to(b)
+		 => 1.21120007413626
+		irb> a.heading_to(b)
+		=> 244.959832435678
+		irb(main):006:0> c=a.midpoint_to(b)      # what's halfway from a to b?
+		irb> c.ll
+		=> "37.7899239257175,-122.406153503469"
+		irb(main):008:0> d=c.endpoint(90,10)     # what's 10 miles to the east of c?
+		irb> d.ll
+		=> "37.7897825005142,-122.223214776155"
+
+FYI, that `.ll` method means "latitude longitude".
+
+See the RDOC more more ... there are also operations on rectangular bounds (e.g., determining if a point is within bounds, find the center, etc).
+
+## CONFIGURATION
+
+If you're using this gem by itself, here's how to set configurations:
+
+		# These defaults are used in Geokit::Mappable.distance_to and in acts_as_mappable
+		Geokit::default_units = :miles
+		Geokit::default_formula = :sphere
+		
+		# This is the timeout value in seconds to be used for calls to the geocoder web
+		# services.  For no timeout at all, comment out the setting.  The timeout unit
+		# is in seconds. 
+		Geokit::Geocoders::timeout = 3
+		
+		# These settings are used if web service calls must be routed through a proxy.
+		# These setting can be nil if not needed, otherwise, addr and port must be 
+		# filled in at a minimum.  If the proxy requires authentication, the username
+		# and password can be provided as well.
+		Geokit::Geocoders::proxy_addr = nil
+		Geokit::Geocoders::proxy_port = nil
+		Geokit::Geocoders::proxy_user = nil
+		Geokit::Geocoders::proxy_pass = nil
+		
+		# This is your yahoo application key for the Yahoo Geocoder.
+		# See http://developer.yahoo.com/faq/index.html#appid
+		# and http://developer.yahoo.com/maps/rest/V1/geocode.html
+		Geokit::Geocoders::yahoo = 'REPLACE_WITH_YOUR_YAHOO_KEY'
+		    
+		# This is your Google Maps geocoder key. 
+		# See http://www.google.com/apis/maps/signup.html
+		# and http://www.google.com/apis/maps/documentation/#Geocoding_Examples
+		Geokit::Geocoders::google = 'REPLACE_WITH_YOUR_GOOGLE_KEY'
+		    
+		# This is your username and password for geocoder.us.
+		# To use the free service, the value can be set to nil or false.  For 
+		# usage tied to an account, the value should be set to username:password.
+		# See http://geocoder.us
+		# and http://geocoder.us/user/signup
+		Geokit::Geocoders::geocoder_us = false 
+		
+		# This is your authorization key for geocoder.ca.
+		# To use the free service, the value can be set to nil or false.  For 
+		# usage tied to an account, set the value to the key obtained from
+		# Geocoder.ca.
+		# See http://geocoder.ca
+		# and http://geocoder.ca/?register=1
+		Geokit::Geocoders::geocoder_ca = false
+		
+		# This is the order in which the geocoders are called in a failover scenario
+		# If you only want to use a single geocoder, put a single symbol in the array.
+		# Valid symbols are :google, :yahoo, :us, and :ca.
+		# Be aware that there are Terms of Use restrictions on how you can use the 
+		# various geocoders.  Make sure you read up on relevant Terms of Use for each
+		# geocoder you are going to use.
+		Geokit::Geocoders::provider_order = [:google,:us]
+
+If you're using this gem with the [geokit-rails plugin](http://github.com/andre/geokit-rails/tree/master), the plugin
+creates a template with these settings and places it in `config/initializers/geokit_config.rb`.
+
+## SUPPORTED GEOCODERS
+
+### "regular" address geocoders 
+* Yahoo Geocoder - requires an API key.
+* Geocoder.us - may require authentication if performing more than the free request limit.
+* Geocoder.ca - for Canada; may require authentication as well.
+* Geonames - a free geocoder
+
+### address geocoders that also provide reverse geocoding 
+* Google Geocoder - requires an API key.
+
+### IP address geocoders 
+* IP Geocoder - geocodes an IP address using hostip.info's web service.
+* Geoplugin.net -- another IP address geocoder
+
+### The Multigeocoder
+* Multi Geocoder - provides failover for the physical location geocoders.
+
+## NOTES ON WHAT'S WHERE
+
+mappable.rb contains the Mappable module, which provides basic
+distance calculation methods, i.e., calculating the distance
+between two points. 
+
+mappable.rb also contains LatLng, GeoLoc, and Bounds.
+LatLng is a simple container for latitude and longitude, but 
+it's made more powerful by mixing in the above-mentioned Mappable
+module -- therefore, you can calculate easily the distance between two
+LatLng ojbects with `distance = first.distance_to(other)`
+
+GeoLoc (also in mappable.rb) represents an address or location which
+has been geocoded. You can get the city, zipcode, street address, etc.
+from a GeoLoc object. GeoLoc extends LatLng, so you also get lat/lng
+AND the Mappable modeule goodness for free.
+
+geocoders.rb contains all the geocoder implemenations. All the gercoders 
+inherit from a common base (class Geocoder) and implement the private method
+do_geocode.
+
+## LICENSE
+
+(The MIT License)
+
+Copyright (c) 2007-2009 Andre Lewis and Bill Eisenhauer
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+'Software'), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED 'AS IS', WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
+CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
+TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
+SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

data/Rakefile

@@ -0,0 +1,20 @@
+# -*- ruby -*-
+
+require 'rubygems'
+require 'hoe'
+require './lib/geokit'
+
+Hoe.new('Geokit', Geokit::VERSION) do |p|
+  # p.rubyforge_name = 'Geokitx' # if different than lowercase project name
+  p.developer('Andre Lewis and Bill Eisenhauer', 'andre@earthcode.com / bill_eisenhauer@yahoo.com')
+end
+
+task :generate_gemspec do
+  system "rake debug_gem | grep -v \"(in \" > `basename \\`pwd\\``.gemspec"
+end
+
+task :update_manifest do
+  system "touch Manifest.txt; rake check_manifest | grep -v \"(in \" | patch"
+end
+
+# vim: syntax=Ruby