site24x7_apminsight 1.0

data/LICENSE.txt

@@ -0,0 +1,60 @@
+This License Agreement details the policy for license of Site24x7 APM Insight Ruby Agent ("Licensed Software")
+Please read the following license carefully, before either (i) downloading the Licensed Software from an authorized website, or (ii) installing the Licensed Software. You acknowledge that you have read this License Agreement, have understood it, and agree to be bound by its terms. If you do not agree to the terms and conditions of this Agreement, do not download or install the Licensed Software.
+
+1. LICENSE GRANT
+
+	Zoho Corp. grants to you a non-exclusive, non-transferable, world-wide license to use the Licensed Software, including user documentation and updates during and as part of your subscription to APM Insight ("the Service").Licensed Software forms part and parcel of your subscription to the Service. You agree not to use the Licensed Software in any manner not explicitly permitted herein. Since the Licensed Software is provided as part of the Service, you also agree to comply with the terms under which the Service is provided to you.
+
+2. THIRD PARTY PRODUCTS:
+
+	The Licensed Software may contain software which originated with third party vendors and without limiting the general applicability of the other provisions of this Agreement, you agree that (a) the title to any third party software incorporated in the Licensed Software shall remain with the third party which supplied the same; and (b) you will not distribute any such third party software available with the Licensed Software, unless the license terms of such third party software provide otherwise.
+
+3. RESTRICTIONS ON USE:
+
+In addition to all other terms and conditions of this Agreement, you shall not:
+	i.	remove any copyright, trademark or other proprietary notices from the Licensed Software or its copies;
+	ii.	make any copies except for one back-up or archival copy, for temporary emergency purpose;
+	iii. rent, lease, license, sublicense or distribute the Licensed Software or any portions of it on a standalone basis or as part of your application; 
+	iv.	modify or enhance the Licensed Software; 
+	v.	reverse engineer, decompile or disassemble the Licensed Software;
+
+4. TECHNICAL SUPPORT:
+
+	Technical support for the Licensed Software is provided as part of your subscription to the Service. Technical support for the Licensed Software is co-terminus with your subscription to the Service.
+
+5. OWNERSHIP AND INTELLECTUAL PROPERTY:
+
+	Zoho Corp. owns all right, title and interest in and to the Licensed Software. Zoho Corp. expressly reserves all rights not granted to you herein, including the right to discontinue or not to release any Software and to alter prices, features, specifications, capabilities, functions, licensing terms, release dates, general availability or characteristics of the  Licensed Software. The Software is only licensed and not sold to you by Zoho Corp.
+
+6. AUDIT:
+
+	Zoho Corp. has the right to audit your Use of the Licensed Software by providing at least seven (7) days prior written notice of its intention to conduct such an audit at your facilities during normal business hours.
+
+7. CONFIDENTIALITY:
+	
+	The Licensed Software contains proprietary information of Zoho Corp. that are protected by the laws of the United States and you hereby agree to take all reasonable efforts to maintain the confidentiality of the Licensed Software. You agree to reasonably communicate the terms and conditions of this Agreement to those persons employed by you who come into contact with or access the Licensed Software, and to use reasonable efforts to ensure their compliance with such terms and conditions, including but not limited to, not knowingly permitting such persons to use any portion of the Licensed Software for a purpose that is not allowed under this Agreement. 
+
+8. WARRANTY DISCLAIMER:
+
+	ZOHO CORP. DOES NOT WARRANT THAT THE LICENSED SOFTWARE WILL BE ERROR-FREE. EXCEPT AS PROVIDED HEREIN, THE LICENSED SOFTWARE IS FURNISHED "AS IS" WITHOUT WARRANTY OF ANY KIND, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND WITHOUT WARRANTY AS TO THE PERFORMANCE OR RESULTS YOU MAY OBTAIN BY USING THE LICENSED SOFTWARE. YOU ARE SOLELY RESPONSIBLE FOR DETERMINING THE APPROPRIATENESS OF USING THE LICENSED SOFTWARE AND ASSUME ALL RISKS ASSOCIATED WITH THE USE OF IT, INCLUDING BUT NOT LIMITED TO THE RISKS OF PROGRAM ERRORS, DAMAGE TO OR LOSS OF DATA, PROGRAMS OR EQUIPMENT, AND UNAVAILABILITY OR INTERRUPTION OF OPERATIONS.
+BECAUSE SOME JURISDICTIONS DO NOT ALLOW FOR THE EXCLUSION OR LIMITATION OF IMPLIED WARRANTIES, THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU.
+
+9. LIMITATION OF LIABILITY:
+
+	IN NO EVENT WILL ZOHO CORP. BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY SPECIAL, INCIDENTAL, INDIRECT, PUNITIVE OR EXEMPLARY OR CONSEQUENTIAL DAMAGES, OR DAMAGES FOR LOSS OF BUSINESS, LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF BUSINESS INFORMATION ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM OR FOR ANY CLAIM BY ANY OTHER PARTY EVEN IF ZOHO CORP. HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. ZOHO CORP.'S ENTIRE LIABILITY WITH RESPECT TO ITS OBLIGATIONS UNDER THIS AGREEMENT OR OTHERWISE WITH RESPECT TO THE LICENSED SOFTWARE SHALL NOT EXCEED THE SUBSCRIPTION FEE PAID BY YOU FOR THE SERVICE.
+BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES, THE ABOVE EXCLUSIONS OR LIMITATIONS MAY NOT APPLY TO YOU.
+
+10. INDEMNIFICATION:
+
+	Zoho Corp. agrees to indemnify and defend you from and against any and all claims, actions or proceedings, arising out of any claim that the Licensed Software infringes or violates any valid U.S. patent, copyright or trade secret right of any third party; so long as you provide; (i) prompt written notice to Zoho Corp. of such claim; (ii) cooperate with Zoho Corp. in the defense and/or settlement thereof, at Zoho Corp.'s expense; and, (iii) allow Zoho Corp. to control the defense and all related settlement negotiations. The above is Zoho Corp.'s sole obligation to you and shall be your sole and exclusive remedy pursuant to this Agreement for intellectual property infringement. 
+	Zoho Corp. shall have no indemnity obligation for claims of infringement to the extent resulting or alleged to result from (i) any combination, operation, or use of the Licensed Software with any programs or equipment not supplied by Zoho Corp.; (ii) any modification of the Licensed Software by a party other than Zoho Corp.; and (iii) your failure, within a reasonable time frame, to implement any replacement or modification of Licensed Software provided by Zoho Corp.
+
+11. TERMINATION:
+
+	This Agreement is co-terminus with your subscription to the Service. You may terminate this Agreement at any time by destroying or returning to Zoho Corp. all copies of the Licensed Software in your possession. Zoho Corp. may terminate this Agreement for any reason, including but not limited to your breach of any of the terms of this Agreement. Upon termination, you shall destroy or return to Zoho Corp. all copies of the Licensed Software and certify in writing that all known copies have been destroyed. All provisions relating to confidentiality, proprietary rights, non-disclosure, and limitation of liability shall survive the termination of this Agreement.
+	
+12. GENERAL:
+
+	If you are a resident of the United States or Canada, this Agreement shall be governed by and interpreted in all respects by the laws of the State of California, without reference to conflict of laws' principles, as such laws are applied to agreements entered into and to be performed entirely within California between California residents. If you are a resident of any other country, this Agreement shall be governed by and interpreted in all respects by the laws of the Republic of India without reference to conflict of laws' principles, as such laws are applied to agreements entered into and to be performed entirely within the Republic of India between residents of the Republic of India. If you are a resident of the United States or Canada, you agree to submit to the personal jurisdiction of the courts in the Northern District of California. If you are a resident of any other country, you agree to submit to the personal jurisdiction of the courts in Chennai, India. This Agreement constitutes the entire agreement between the parties, and supersedes all prior communications, understandings or agreements between the parties. Any waiver or modification of this Agreement shall only be effective if it is in writing and signed by both parties hereto. If any part of this Agreement is found to be invalid or unenforceable, the remainder shall be interpreted so as to reasonably effect the intention of the parties.
+
+

data/README.rdoc

@@ -0,0 +1,67 @@
+APM Insight Ruby Agent
+	Site24x7 APM Insight Ruby agent gives you end-to-end web-transaction awareness enabling you to isolate performance issues and resolve them quickly. Site24x7 APM Insight requires a monitoring agent (ruby gem) to be deployed in your application server to monitor Ruby application performance. Download the latest Ruby Agent(site24x7_apminsight.gem) and deploy it in your application server. The agent collects application performance metrics and sends it to the central Site24x7 server at fixed intervals i.e. every 60 seconds. You can view them at https://site24x7.com in your accounts page.
+ 
+Installing APM Insight Agent
+
+	Ruby Agent installation can be done in two ways:
+
+    	* Install from RubyGems by using the following command in the system where Ruby is installed : 
+		
+		gem install site24x7_apminsight
+    				
+			OR
+
+	* Download the site24x7_apminsight.gem file from your accounts page in https://site24x7.com (after sign in) or the RubyGems website and run the command 
+		
+			gem install site24x7_apminsight.gem
+
+Configuration
+
+	After installation of the gem:
+
+    	For each of your applications, add the following line to the application gemfile:
+
+        	gem 'site24x7_apminsight'
+		
+				OR
+
+    	For each of your applications, add the following line to the application initializer block:
+
+        	require 'site24x7_apminsight'
+
+	A copy of the configuration file apminsight.conf will be available in the <Gem Installed folder> /site24x7_apminsight/conf/. Configure the class name in the configuration file(include.packages), so that all the methods in that class can be instrumented and details will be reported in tracedata.
+ 
+
+The following configuration options are mandatory and should be provided for the agent to be initialized:
+
+    application.name - The application's name to be displayed in Site24x7 server.
+
+    license.key - The license api key from your account page after sign in (https://site24x7.com)
+
+    behind.proxy - The proxy network under which the agent is installed
+
+    agent.server.port - The HTTP listening port of the Application Server.
+
+More configuration options of APM Insight Ruby Agent can be found here. https://help.site24x7.com/APM-Insight-Agent-Configuration.html
+ 
+Supported Environments :
+
+    Ruby - 1.8.7 and higher
+
+    Rails - 3.0 and higher
+
+References
+
+	* Create an apminsight account in Site24x7 server (https://www.site24x7.com)
+
+	* Download link for site24x7_apminsight gem 
+
+		From your account page after valid sign in
+			or
+		http://rubygems.org/gems/site24x7_apminsight
+
+	* Help Documentation for apminsight
+
+		https://help.site24x7.com/Installing-Ruby-Agent.html
+		https://help.site24x7.com/Troubleshooting-Tips-Ruby-Agent.html
+

data/Rakefile

@@ -0,0 +1,63 @@
+# encoding: utf-8
+
+require 'rubygems'
+require 'bundler'
+begin
+  Bundler.setup(:default, :development)
+rescue Bundler::BundlerError => e
+  $stderr.puts e.message
+  $stderr.puts "Run `bundle install` to install missing gems"
+  exit e.status_code
+end
+require 'rake'
+
+require 'jeweler'
+Jeweler::Tasks.new do |gem|
+  # gem is a Gem::Specification... see http://docs.rubygems.org/read/chapter/20 for more options
+  gem.name = "site24x7_apminsight"
+  gem.homepage = "https://help.site24x7.com/Installing-Ruby-Agent.html" #to be changed after the web page is ready
+  gem.license = "MIT"
+  gem.summary = %Q{Application Performace Monitor}
+  gem.description = %Q{Application Performace Monitor : Monitor the web tranasactions}
+  gem.email = "apm-insight@zohocorp.com"
+  gem.authors = ["Rajalakshmi Ezhilan"]
+  gem.files=Dir.glob('lib/**/*.*')
+  # dependencies defined in Gemfile
+end
+Jeweler::RubygemsDotOrgTasks.new
+
+require 'rake/testtask'
+Rake::TestTask.new(:test) do |test|
+  test.libs << 'lib' << 'test'
+  test.pattern = 'test/**/test_*.rb'
+  test.verbose = true
+end
+
+require 'rcov/rcovtask'
+Rcov::RcovTask.new do |test|
+  test.libs << 'test'
+  test.pattern = 'test/**/test_*.rb'
+  test.verbose = true
+  test.rcov_opts << '--exclude "gems/*"'
+end
+
+task :default => :test
+
+require 'rake/rdoctask'
+Rake::RDocTask.new do |rdoc|
+  version = File.exist?('VERSION') ? File.read('VERSION') : ""
+
+  rdoc.rdoc_dir = 'rdoc'
+  rdoc.title = "site24x7_apminsight #{version}"
+  rdoc.rdoc_files.include('README*')
+  rdoc.rdoc_files.include('lib/**/*.*')
+  rdoc.rdoc_files.include('lib/agent/**/*.*')
+  rdoc.rdoc_files.include('lib/agent/*.*')
+  rdoc.rdoc_files.include('lib/agent/logging/*.*')
+  rdoc.rdoc_files.include('lib/agent/server/*.*')
+  rdoc.rdoc_files.include('lib/agent/server/worker/*.*')
+  rdoc.rdoc_files.include('lib/agent/configuration/*.*')
+  rdoc.rdoc_files.include('lib/agent/metrics/*.*')
+  rdoc.rdoc_files.include('lib/agent/util/*.*')
+  rdoc.rdoc_files.include('lib/config/*.*')
+end

data/VERSION

@@ -0,0 +1 @@
+1.0

data/conf/apminsight.conf

@@ -0,0 +1,96 @@
+# $Id$
+#
+###################  APM Insight Agent Configuration File  ###################
+#
+#This file contains configuration options for APM Insight agent installation in your Application Server.
+#
+#NOTE: Though the properties can be defined in any different order, it is advisable to maintain
+#the below order for related properties and ease of reference.
+#
+#All the configuration options defaults to factory configuration if commented or not supported values
+
+#License key of your account.
+license.key=
+
+#Logical name of your application. Say for example you have "Order Processing" applications running in
+#10 instances of Tomcat server. Specify the name as "Order Processing" for the name in all the 10 
+#instances while deploying the agent. Site24x7 will group the data from 10 instances of
+#Tomcat and provide response time, throughput etc. 
+application.name=My Application
+
+#APM Insight agent communicates to the Site24x7 through the HTTP/HTTPS protocol.
+#Specify Proxy server configuration when there is a proxy server between APM Insight agent and
+#Site24x7 server. 
+#
+behind.proxy=false
+#proxy.server.host=proxyserver
+#proxy.server.port=proxyport
+#proxy.auth.username=proxyuser
+#proxy.auth.password=proxypassword
+
+#Application Server HTTP/HTTPS listening port.Say for example when you are deploying the agent in Tomcat
+#Server running in 8080 port, specify the value as 8080.
+#[Mandatory]
+agent.server.port=8080
+
+#The Apdex (Application Performance Index) threshold is used to calculate application performance score.
+#More at http://www.apdex.org. 
+#A Transaction is said to be satisfied, if the response time is equal to or below the apdex.threshold.
+#A Transaction is said to be tolerating, if  the response time is greater than apdex.threshold and less 
+#than 4 times of apdex.threshold. A Transaction is said to be frustrated, if the response time is greater
+#than 4 times of apdex.threshold. Say for example when you specify the value as 2, transactions with response
+#time less than 2 seconds is considered as satisfied, transactions with response time greater than 2 and
+#less than 8 is considered as tolerating and transactions with response time greater than 8 seconds is 
+#considered as frustrating.
+#default value: 0.5 (second)
+apdex.threshold=0.5
+
+#Whether SQL queries getting executed in your application need to be tracked or not.
+#default value: true
+sql.capture.enabled=true
+
+#Whether the transaction trace is enabled or not. Setting this value to true will send the trace of the
+#slow transaction.
+#default value: true
+transaction.trace.enabled=true
+
+#Threshold to construct the trace for slow transactions. Transaction Traces violating this threshold will be 
+#collected and sent to the server. Used to analyze and troubleshoot the Transaction by the user.
+#default value: 2 (second)
+transaction.trace.threshold=2
+
+#Enabling this option will parametrize all SQL Queries in Slow Transaction Traces (if sql.capture.enabled 
+#set to true & transaction.trace.enabled set to true). Disabling this option will give you the real query
+#with actual parameters. It is recommended to enable this option if there are queries getting executed
+#using confidential parameters like credit card number, passwords, etc.
+#default value: true
+transaction.trace.sql.parametrize=true
+
+#Threshold value to generate a stack trace to identify the caller who executed a slow query. This stack 
+#trace is sent to the server for the user to analyze and troubleshoot
+#default value: 3 (second)
+transaction.trace.sql.stacktrace.threshold=3
+
+#Stop listening transactions with specified URL pattern.
+transaction.skip.listening=*.css, *.js, *.gif, *.jpg, *.jpeg, *.bmp, *.png
+
+#Sampling counter.Say for example when you specify the value as 20, agent will track one in 20 transactions.
+#default value: 1 (transaction)
+transaction.tracking.request.interval=1
+
+#The packages which also needs to be instrumented. By Default, APM Insight does not instrument all the class
+#loaded in the JVM. eg: configuring com/test/customimpl/.* will include all the packages & classes that
+#starts with com.test.customimpl. It is best if this is enabled only in the testing/staging environment.
+#Use comma(,) to separate multiple entries.
+#include.packages=
+
+#Directory where agent logs information separately.
+#Defaults to the directory where apminsight-javaagent.jar is installed. 
+#Use forward slash(/) as path separator.
+#apminsight.log.dir=./apminsight/logs
+
+#The log level at which the APM Insight agent should record logging 
+#information. The levels are SEVERE, WARNING, INFO, FINE in the order 
+#respectively. Defaults to the level INFO if commented or mentioned 
+#incorrectly.
+apminsight.log.level=INFO

data/lib/agent/am_objectholder.rb

@@ -0,0 +1,66 @@
+
+require "agent/configuration/am_configuration"
+require "agent/logging/am_logger"
+require "agent/util/am_util"
+require "agent/util/am_constants"
+require "agent/server/am_connector"
+require "agent/server/am_agent"
+require "agent/metrics/am_metricscollector"
+require "agent/metrics/am_metricstore"
+require "agent/metrics/am_metricsformatter"
+require "agent/metrics/am_metricsparser"
+require "agent/server/instrument/am_instrumenter"
+
+module ManageEngine
+
+	class APMObjectHolder
+		attr_reader :config,:log,:util,:constants,:shutdown,:connector,:agent,:collector
+		attr_accessor :shutdown,:agent_initialized,:last_dispatch_time,:instrumenter,:store,:formatter,:parser
+		@@objects = nil
+		#Don't Change the Order of Initialize
+		def initializeObjects
+			@agent_initialized	=		false
+			@shutdown 			=		false
+			@constants 			= 		ManageEngine::APMConstants.new
+			@log 				= 		ManageEngine::APMLogger.new
+			@util 				=		ManageEngine::APMUtil.new
+			@util.setLogger @log
+			@config 			= 		ManageEngine::APMConfig.new
+			@connector 			= 		ManageEngine::APMConnector.new
+			@store 				=	 	ManageEngine::APMMetricsStore.new
+			@collector			=		ManageEngine::APMMetricsCollector.new
+			@instrumenter 		= 		ManageEngine::APMInstrumenter.new
+			@formatter 			= 		ManageEngine::APMMetricsFormatter.new
+			@parser 			= 		ManageEngine::APMMetricsParser.new
+			@agent 				= 		ManageEngine::APMAgent.new
+			@last_dispatch_time	=		@@objects.util.currenttimemillis
+			@@objects.log.debug "[APMObjectHolder] [ All Objects Initialized ] "
+		end
+
+  		def self.instance
+			if(@@objects==nil)
+				@@objects = ManageEngine::APMObjectHolder.new
+				@@objects.initializeObjects
+			end
+    		return @@objects
+  		end
+
+		def shutdownagent
+			###@agent_initialized=false
+			#@shutdown = true
+			#@constants = nil
+			#@util = nil
+			#@config = nil
+			#@connector = nil
+			#@store = nil
+			#@collector=nil
+			#@instrumenter = nil
+			#@formatter = nil
+			#@parser = nil
+			#@agent = nil
+			#@log.info "[ APMObjectHolder ][ All Objects deleted ] "
+			#@log = nil
+		end
+
+	end #c
+end#m

data/lib/agent/configuration/am_configuration.rb

@@ -0,0 +1,268 @@
+require 'rubygems'
+require 'json'
+require 'socket'
+require 'rails'
+require 'agent/am_objectholder'
+
+module ManageEngine
+	class APMConfig
+		attr_reader :agenthost,:agentport,:instance_id,:alreadyconnected,:apmhost,:apmport,:license_key,:site24x7
+		attr_reader :appname,:proxyneeded, :apdex_t, :trans_trace, :trans_trace_t, :sql_capture, :sql_capture_params, :sql_trace_t,:proxy_user,:proxy_pass, :metric_overflow_t, :trace_overflow_t
+		attr_reader :proxy_host,:proxy_port ,:is_secured, :logs_dir ,:connection_retry,:agent_enabled,:connect_interval,:db_operations,:include_packages
+		attr_accessor :app_db,:app_dispatcher,:lastupdatedtime
+		def initialize
+			@obj = ManageEngine::APMObjectHolder.instance
+			
+    		#@config = @obj.util.readProperties(@obj.constants.apm_conf)
+			configureFile
+			@agenthost = Socket.gethostname
+			assignConfig
+			@obj.log.setLevel @config["apminsight.log.level"]
+			@instance_id  = 0
+			@agent_enabled = false
+			@alreadyconnected = checkAgentInfo
+			@site24x7 = checkLicenseFile
+			@db_operations =["select","insert","update","delete"]
+			@obj.log.debug "@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@"
+			@obj.log.debug "APP HOME #{File.absolute_path(".")} "
+			@obj.log.debug "APP HOME #{Dir.pwd} "
+			@obj.log.debug "Configuration : "
+			@obj.log.debug "Agent Name : #{@agenthost}"
+			@obj.log.debug "Agent Already Connected : #{@alreadyconnected}"
+			@obj.log.debug "Agent Enabled : #{@agent_enabled}"
+			@obj.log.debug "Allowed DB Operations : #{@db_operations}"
+			@config.each do|key,val|
+			@obj.log.info "#{key} => #{val}"
+				end
+			@obj.log.debug "@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@"
+			@app_db="dummydb"
+			@app_dispatcher = getDispatcher
+			@lastupdatedtime=File.mtime(@obj.constants.apm_conf).to_i
+ 		end
+		
+		def configureFile
+			begin
+				if(FileTest.exists?(@obj.constants.apm_conf))
+					#conf file exists in APPlication Home
+						@obj.log.debug "Config File Exists. It is read from #{@obj.constants.apm_conf}"
+					@config = @obj.util.readProperties(@obj.constants.apm_conf)
+				else
+					gem_conf = Gem.loaded_specs[@obj.constants.apm_gem].full_gem_path
+					#gem_conf = File.join(gem_conf, 'lib')
+					gem_conf = File.join(gem_conf, 'conf')
+					gem_conf = File.join(gem_conf, 'apminsight.conf')
+					#conf file not exists in APPlications Home. So 1. copy it for gem locations
+					if @obj.util.copyFiles gem_conf,@obj.constants.apm_conf
+						#copied sucessfully
+						@obj.log.debug "Config File copied. It is read from #{@obj.constants.apm_conf}"
+						@config = @obj.util.readProperties(@obj.constants.apm_conf)
+					else
+						#Problem in copying, so reading props from Conf file in Gem Location
+						@obj.log.debug "Config File not copied. It is read from #{gem_conf}"
+						@config = @obj.util.readProperties(gem_conf)
+					end
+				end
+				
+			rescue Exception=>e
+				@obj.log.info "[Exception] Problem in Reading Configuration File : \n File : #{@obj.constants.apm_conf}"
+				@obj.log.logException "#{e.message}",e
+				@config = @obj.util.readProperties(gem_conf)
+			ensure
+			end
+		end
+
+		def checkAgentInfo
+			if FileTest.exists?(@obj.constants.agent_conf)
+				@obj.log.debug "Status : Agent Already Connected"
+				props = @obj.util.readProperties(@obj.constants.agent_conf)
+				@instance_id = props["agent.id"]
+				@agent_enabled= @obj.util.getBooleanValue props["agent.enabled"]
+				true
+			else
+				@obj.log.info "Status : Agent not connected"
+				false
+			end
+		end
+
+		def checkLicenseFile
+			if(@license_key != nil)
+				@obj.log.info "License key is not null. Connecting to site24x7"
+				@obj.constants.setLicenseKey @license_key
+				true
+			else
+				@obj.log.info "License key is null. Connecting to APPManager"
+				false
+			end
+
+		end
+
+		def updateAgentInfoFile(props)
+			@instance_id = props["agent.id"]
+			@agent_enabled= @obj.util.getBooleanValue props["agent.enabled"]
+			@obj.util.writeProperties(@obj.constants.agent_conf,props)
+		end
+
+		def initValues
+			@apmport=8080
+			@appname="My Application"
+			@proxyneeded = false
+			@proxy_host="localhost"
+			@proxy_port=80
+			@proxy_user=""
+			@proxy_pass=""
+			@is_secured=false
+			@logs_dir="./log"
+			@connection_retry = 0
+			@connect_interval = 60
+			@apdex_t=0.5
+			@include_packages=Array.new
+			@trans_trace_t=2
+			@sql_trace_t=3
+			@metric_overflow_t=250
+			@trace_overflow_t=60
+		end
+
+		def assignConfig
+		initValues
+		 @config.each do |key,value|
+			 case key
+			 when "application.name" then @appname=value
+			 when "apm.host" then @apmhost=value
+			 when "apm.port" then @apmport=isInteger(@apmport,value)
+			 when "license.key" then @license_key=value
+			 when "behind.proxy" then @proxyneeded=@obj.util.getBooleanValue value
+			 when "agent.server.port" then @agentport=isInteger(@agentport,value)
+			 when "apdex.threshold" then @apdex_t=isFloat(@apdex_t,value)
+			 when "transaction.trace.enabled" then @trans_trace=@obj.util.getBooleanValue value
+			 when "transaction.trace.threshold" then @trans_trace_t=isFloat(@trans_trace_t,value)
+			 when "sql.capture.enabled" then @sql_capture=@obj.util.getBooleanValue value
+			 when "transaction.trace.sql.parametrize" then @sql_capture_params=@obj.util.getBooleanValue value
+			 when "transaction.trace.sql.stacktrace.threshold" then @sql_trace_t=isFloat(@sql_trace_t,value)
+			 when "proxy.server.host" then @proxy_host=value
+			 when "proxy.server.port" then @proxy_port=value
+			 when "proxy.auth.username" then @proxy_user=value
+			 when "proxy.auth.password" then @proxy_pass=value
+			 when "apminsight.secure" then @is_secured=@obj.util.getBooleanValue value
+			 when "apminsight.log.dir" then @logs_dir=value
+			 when "agent.connection.retry" then @connection_retry=value #Not in Conf - yet to come
+			when "agent.connection.interval" then	 @connect_interval=value#Not in Conf - yet to come
+			when "include.packages" then @include_packages=@obj.util.getArray value,","
+			end
+		 end
+		end
+
+		def getAgentInfo
+			data =  Hash.new
+			agentdata = Hash.new
+			agentdata = {"application.type"=>"RUBY","application.name"=>@appname,"hostname"=>@agenthost,"port"=>@agentport,"agent.version"=>"1.0"}
+			data["agent_info"]=agentdata
+			data["environment"]=getEnvData
+			data["custom_config_info"]=getAgentConfigData
+			data
+		end
+
+		def getEnvData
+			env =  Hash.new
+			begin
+			ENV.to_hash.each do |key, value|
+				env[key] = value
+			end
+			env["Application Path"]="#{Rails.root}"
+			rescue Exception=>e
+			end
+			env
+		end
+			
+		def getAgentConfigData
+			agentconfig = Hash.new
+			agentconfig["last.modified.time"]=@lastupdatedtime*1000
+			agentconfig["apdex.threshold"]=@apdex_t
+			agentconfig["sql.capture.enabled"]=0
+			if @sql_capture
+				agentconfig["sql.capture.enabled"]=1
+			end
+			agentconfig["transaction.trace.enabled"]=0
+			if @trans_trace
+				agentconfig["transaction.trace.enabled"]=1
+			end
+			agentconfig["transaction.trace.threshold"]=@trans_trace_t
+			agentconfig["transaction.trace.sql.parametrize"]=0
+			if @sql_capture_params
+				agentconfig["transaction.trace.sql.parametrize"]=1
+			end
+			agentconfig["transaction.trace.sql.stacktrace.threshold"]=@sql_trace_t
+			agentconfig["transaction.tracking.request.interval"]=1
+			agentconfig
+		end
+
+		def getDispatcher
+		dispatcher = "unknown"
+		if defined?(PhusionPassenger) then
+			dispatcher = "passenger"
+		end
+		dispatcher
+		end
+		
+		def isInteger default,value
+			if @obj.util.is_integer value
+				value.to_i
+			else
+				@obj.log.info "Problem in getting Integer Value #{value} .. So setting default value #{default} "
+				default.to_i
+			end
+
+		end
+
+		def isFloat default,value
+			if @obj.util.is_float value
+				value.to_f
+			else
+				default.to_f
+				@obj.log.info "Problem in getting Integer Value #{value} .. So setting default value #{default} "
+			end
+		end
+
+		def update_config configInfo
+			filepath = @obj.constants.apm_conf
+			f = "apminsight.conf.new"
+			begin
+				propsFile=File.open(filepath, 'r')
+				file = File.new(f,"w+")
+	      			propsFile.read.each_line do |line|
+        			line.strip!
+        			if (line[0] != ?# and line[0] != ?=)
+          				i = line.index('=')
+        	  			if (i)
+						key1 = line[0..i - 1].strip
+						if configInfo.has_key?(key1)
+							file.puts "#{key1}=#{configInfo[key1]}\n"
+						else
+							file.puts "#{line}\n"
+						end
+	          			else
+						file.puts "#{line}\n"
+         				end
+				else
+					file.puts "#{line}\n"
+        			end
+      	  		end
+			rescue Exception=>e
+				@obj.log.info "Problem in Reading / Writing Property File :  #{e.message} "
+				@obj.log.error "#{e.backtrace}"
+			ensure
+					propsFile.close
+					file.close
+			end
+			res = @obj.util.copyFiles f, filepath
+			if res
+				@obj.log.info "copyFiles result = #{res}"
+				#delete apminsight.conf.new has to be done
+			end
+			configureFile
+			assignConfig
+		end
+
+
+	end#c
+end#m
+