selenium-cucumber 0.1.1 → 1.1.1

checksums.yaml

@@ -1,7 +1,7 @@
 ---
 SHA1:
-  metadata.gz: 5d305257fe405a3a6e3fdef64ba0238ac57f2fe3
-  data.tar.gz: 05c21ef7cb1e6a756f6cc21baee9a5f0442da258
+  metadata.gz: 0fafe2faa8ccac6664b653cc839e147012a36fed
+  data.tar.gz: 70a7cfc8e999dbfbaeaf305a5bd2b19c2e1dca5f
 SHA512:
-  metadata.gz: 96dcf390850fdbfcd240c64bf73e0a6af06289b63fb8d8764e12c6566080dfd4184e30484963accd8aaeb62ffdb4bf1cc569ed7b554fcd9d70ff91a91cdc5488
-  data.tar.gz: 8165bf844471dfa3cc4545f61a855aaa81c86e7d5b4c8fa8e7668bc3e5f2bcb26bbd005b4ef55d44430fb89bc8693c11a38895b626d516fe49266feed03f9728
+  metadata.gz: 76e7c7f5543ca0512f264edc0b8aad03cb8a31e9791a0461b533ab8f0a953e9fefaa22076ca54492103ef89cb81037a7c35da4824dd1d0aba1edb225e568a884
+  data.tar.gz: 59666313ef8c2b3df72eaf4da0ca2ca35dbc726694b8c0ab8225eed999eb2e186990a0da51bb41783c50d043d229dcf19cb619b981bd1b6143f4cab7a581e4ee

data/bin/generate.rb

@@ -1,20 +1,20 @@
-
-def selenium_cucumber_scaffold
-  if File.exists?(@features_dir)
-    puts "A features directory already exists. Stopping..."
-    exit 1
-  end
-  msg("Question") do
-    puts "I'm about to create a subdirectory called features."
-    puts "features will contain all your project tests."
-    puts "Please hit return to confirm that's what you want."
-  end
-  exit 2 unless STDIN.gets.chomp == ''
-
-  FileUtils.cp_r(@source_dir, @features_dir)
-
-  msg("Info") do
-    puts "features subdirectory created. \n"
-  end
-
-end
+
+def selenium_cucumber_scaffold
+  if File.exists?(@features_dir)
+    puts "A features directory already exists. Stopping..."
+    exit 1
+  end
+  msg("Question") do
+    puts "I'm about to create a subdirectory called features."
+    puts "features will contain all your project tests."
+    puts "Please hit return to confirm that's what you want."
+  end
+  exit 2 unless STDIN.gets.chomp == ''
+
+  FileUtils.cp_r(@source_dir, @features_dir)
+
+  msg("Info") do
+    puts "features subdirectory created. \n"
+  end
+
+end

data/bin/helper.rb

@@ -1,51 +1,51 @@
-require 'tempfile'
-require 'json'
-require "rubygems"
-
-def msg(title, &block)
-  puts "\n" + "-"*10 + title + "-"*10
-  block.call
-  puts "-"*10 + "-------" + "-"*10 + "\n"
-end
-
-def print_usage
-  puts <<EOF
-  
-  Usage: selenium-cucumber <command-name> [parameters] [options]
-  
-  <command-name> can be one of
-    help
-      prints more detailed help information.
-    gen
-      generate a features folder structure.
-    version
-      prints the gem version
-
-  <options> can be 
-     -v, --verbose   Turns on verbose logging
-EOF
-end
-
-def print_help
-  puts <<EOF
-  
-  Usage: selenium-cucumber <command-name> [parameters] [options]
-  
-  <command-name> can be one of
-    help
-    gen
-    version
-
-    Commands:
-      help : prints more detailed help information.
-
-      gen  : creates a skeleton features dir. This is usually used once when
-             setting up selnium-cucumber to ensure that the features folder contains
-             the right step definitions and environment to run with cucumber.
-
-      version : prints the gem version
-
-  <Options>
-      -v, --verbose  Turns on verbose logging
-EOF
+require 'tempfile'
+require 'json'
+require "rubygems"
+
+def msg(title, &block)
+  puts "\n" + "-"*10 + title + "-"*10
+  block.call
+  puts "-"*10 + "-------" + "-"*10 + "\n"
+end
+
+def print_usage
+  puts <<EOF
+  
+  Usage: selenium-cucumber <command-name> [parameters] [options]
+  
+  <command-name> can be one of
+    help
+      prints more detailed help information.
+    gen
+      generate a features folder structure.
+    version
+      prints the gem version
+
+  <options> can be 
+     -v, --verbose   Turns on verbose logging
+EOF
+end
+
+def print_help
+  puts <<EOF
+  
+  Usage: selenium-cucumber <command-name> [parameters] [options]
+  
+  <command-name> can be one of
+    help
+    gen
+    version
+
+    Commands:
+      help : prints more detailed help information.
+
+      gen  : creates a skeleton features dir. This is usually used once when
+             setting up selnium-cucumber to ensure that the features folder contains
+             the right step definitions and environment to run with cucumber.
+
+      version : prints the gem version
+
+  <Options>
+      -v, --verbose  Turns on verbose logging
+EOF
 end

data/bin/selenium-cucumber

@@ -1,29 +1,30 @@
-#!/usr/bin/env ruby 
-
-require_relative 'helper.rb'
-require_relative 'generate.rb'
-require 'selenium-cucumber/version'
-
-@features_dir = File.join(FileUtils.pwd, "features")
-@support_dir = File.join(@features_dir, "support")
-@support_dir = File.join(@features_dir, "expected_images")
-@support_dir = File.join(@features_dir, "image_difference")
-@support_dir = File.join(@features_dir, "screenshots")
-@source_dir = File.join(File.dirname(__FILE__), '..', 'features-skeleton')
-
-if (ARGV.length == 0)
-  print_usage
-else
-	cmd = ARGV.shift
-
-	if cmd == "help"
-  		print_help
-	elsif cmd == "gen"
-  		selenium_cucumber_scaffold
-	elsif cmd == "version"
-		puts Selenium::Cucumber::VERSION
-  	else
-  		print_usage
-	end
-end
-
+#!/usr/bin/env ruby 
+
+require_relative 'helper.rb'
+require_relative 'generate.rb'
+require 'selenium-cucumber/version'
+
+@features_dir = File.join(FileUtils.pwd, "features")
+@support_dir = File.join(@features_dir, "support")
+@support_dir = File.join(@features_dir, "expected_images")
+@support_dir = File.join(@features_dir, "actual_images")
+@support_dir = File.join(@features_dir, "image_difference")
+@support_dir = File.join(@features_dir, "screenshots")
+@source_dir = File.join(File.dirname(__FILE__), '..', 'features-skeleton')
+
+if (ARGV.length == 0)
+  print_usage
+else
+	cmd = ARGV.shift
+
+	if cmd == "help"
+  		print_help
+	elsif cmd == "gen"
+  		selenium_cucumber_scaffold
+	elsif cmd == "version"
+		puts Selenium::Cucumber::VERSION
+  	else
+  		print_usage
+	end
+end
+

data/doc/canned_steps.md

@@ -3,6 +3,14 @@
 selenium-cucumber comes with the following set of predefined steps.
 You can add your own steps or change the ones you see here.
 
+* [Navigation Steps](https://github.com/sameer49/selenium-cucumber/blob/master/doc/canned_steps.md#navigation-steps)
+* [Assertion Steps](https://github.com/sameer49/selenium-cucumber/blob/master/doc/canned_steps.md#assertion-steps)
+* [Input Steps](https://github.com/sameer49/selenium-cucumber/blob/master/doc/canned_steps.md#input-steps)
+* [Click Steps](https://github.com/sameer49/selenium-cucumber/blob/master/doc/canned_steps.md#click-steps)
+* [Progress Steps](https://github.com/sameer49/selenium-cucumber/blob/master/doc/canned_steps.md#progress-steps)
+* [Screenshot Steps](https://github.com/sameer49/selenium-cucumber/blob/master/doc/canned_steps.md#screenshot-steps)
+* [Configuration Steps](https://github.com/sameer49/selenium-cucumber/blob/master/doc/canned_steps.md#configuration-steps)
+
 ## Navigation Steps
 
 To open/close URL and to navigate between pages use following steps :

data/doc/installation.md

@@ -1,16 +1,16 @@
-Installation
-============
-### Prerequisites
-You need to have Ruby installed. 
-Verify your installation by running ruby -v in a terminal - it should print "ruby 1.9.3" (or higher).
-
-You need to have DevKit installed. 
-
-You can get Ruby and DevKit from [RubyInstaller.org](http://rubyinstaller.org/)
-
-### Installation
-
-Install `selenium-cucumber` gem by running
-
-- `gem install selenium-cucumber`
-
+Installation
+============
+### Prerequisites
+You need to have Ruby installed. 
+Verify your installation by running ruby -v in a terminal - it should print "ruby 1.9.3" (or higher).
+
+You need to have DevKit installed. 
+
+You can get Ruby and DevKit from [RubyInstaller.org](http://rubyinstaller.org/)
+
+### Installation
+
+Install `selenium-cucumber` gem by running
+
+- `gem install selenium-cucumber`
+

data/doc/selenium-cucumber-help.md

@@ -1,18 +1,18 @@
-
-Usage: selenium-cucumber <command-name> [parameters] [options]
-
-  <command-name> can be one of
-    help
-    gen
-    version
-
-  Commands:
-    help : prints more detailed help information.
-
-    gen  : creates a skeleton features dir. This is usually used once when
-           setting up selnium-cucumber to ensure that the features folder contains
-           the right step definitions and environment to run with cucumber.
-
-    version : prints the gem version
-
-    Options:  -v, --verbose  Turns on verbose logging
+
+Usage: selenium-cucumber <command-name> [parameters] [options]
+
+  <command-name> can be one of
+    help
+    gen
+    version
+
+  Commands:
+    help : prints more detailed help information.
+
+    gen  : creates a skeleton features dir. This is usually used once when
+           setting up selnium-cucumber to ensure that the features folder contains
+           the right step definitions and environment to run with cucumber.
+
+    version : prints the gem version
+
+    Options:  -v, --verbose  Turns on verbose logging

data/example/Gemfile

@@ -0,0 +1,5 @@
+source 'http://rubygems.org'
+
+gem 'selenium-cucumber'
+# To run locally
+# gem 'selenium-cucumber', path: 'your local repo path'

data/example/Gemfile.lock

@@ -0,0 +1,36 @@
+GEM
+  remote: http://rubygems.org/
+  specs:
+    builder (3.2.2)
+    childprocess (0.5.3)
+      ffi (~> 1.0, >= 1.0.11)
+    chunky_png (1.3.1)
+    cucumber (1.3.16)
+      builder (>= 2.1.2)
+      diff-lcs (>= 1.1.3)
+      gherkin (~> 2.12)
+      multi_json (>= 1.7.5, < 2.0)
+      multi_test (>= 0.1.1)
+    diff-lcs (1.2.5)
+    ffi (1.9.3)
+    gherkin (2.12.2)
+      multi_json (~> 1.3)
+    multi_json (1.10.1)
+    multi_test (0.1.1)
+    rubyzip (1.1.6)
+    selenium-cucumber (0.1.1)
+      chunky_png
+      cucumber
+      selenium-webdriver
+    selenium-webdriver (2.42.0)
+      childprocess (>= 0.5.0)
+      multi_json (~> 1.0)
+      rubyzip (~> 1.0)
+      websocket (~> 1.0.4)
+    websocket (1.0.7)
+
+PLATFORMS
+  ruby
+
+DEPENDENCIES
+  selenium-cucumber

data/{Example → example}/features/assertion_steps_Ex.feature

@@ -109,20 +109,32 @@ Feature: Assertion Steps
  		Then I should see alert text as "Press a button!"
 		Then I accept alert
 
-	Scenario: verify image by id and id
-		Then actual image having id "img1" and expected image having id "img1" should be similar
+	Scenario: verify image by id and id - jpg image
+ 		Then actual image having id "img1" and expected image having id "img1" should be similar
 
-	Scenario: verify image by xpath and xpath
-		Then actual image having xpath ".//*[@id='img1']" and expected image having xpath ".//*[@id='img1']" should be similar
+	Scenario: verify image by id and image_name - jpg image
+ 		Then actual image having id "img1" and expected image having image_name "original_image.jpg" should be similar
 
-	Scenario: verify image by id and image_name
-		Then actual image having id "img1" and expected image having image_name "flower.png" should be similar
+	Scenario: verify image by url and image_name - jpg image
+		Then actual image having url "http://s27.postimg.org/xlqzpviyr/original_image.jpg" and expected image having image_name "original_image.jpg" should be similar
 
-	Scenario: verify image by url and image_name
-		Then actual image having url "http://shared.ooyala.com.s3.amazonaws.com/dropshadow-flower-pink.png" and expected image having image_name "flower.png" should be similar
+	Scenario: verify image by id and image_name - jpg image - negative test
+ 		Then actual image having id "img1_incorrect" and expected image having image_name "original_image.jpg" should be similar
 
-	Scenario: verify image by id and image_name - negative test 1
-		Then actual image having id "img1" and expected image having image_name "flower1.png" should be similar
+	Scenario: verify image by id and id - png image
+		Then actual image having id "img2" and expected image having id "img2" should be similar
+
+	Scenario: verify image by xpath and xpath - png image
+		Then actual image having xpath ".//*[@id='img2']" and expected image having xpath ".//*[@id='img2']" should be similar
+
+	Scenario: verify image by id and image_name - png image
+		Then actual image having id "img2" and expected image having image_name "logo-PNG.png" should be similar
+
+	Scenario: verify image by url and image_name - png image
+		Then actual image having url "http://s26.postimg.org/itpfqlcop/logo1.png" and expected image having image_name "logo-PNG.png" should be similar
+
+	Scenario: verify image by id and image_name - png image - negative test
+		Then actual image having id "img2_incorrect" and expected image having image_name "logo-PNG.png" should be similar
 
 
 

data/{Example → example}/features/configuration_step_Ex.feature

@@ -5,5 +5,4 @@ Feature: Configuration Printing Step
  	Scenario: Print Configuration
  	
         Given I print configuration
- 		Given I open test page
-   
+ 		And I open test page

data/{Example → example}/features/navigation_steps_Ex.feature

@@ -36,10 +36,10 @@ Feature: Navigation Steps
 
 	Scenario: Hover over elelment
 		
-		Then I hover over element having xpath "html/body/fieldset[8]/p/a[1]"
+		Then I hover over element having id "pop_alert"
+		Then I accept alert
 		
 	Scenario: Interacting with browser
 		
 		Then I resize browser window size to width 400 and height 400
-		Then I maximize browser window
-		#Then I close browser
+		Then I maximize browser window

data/{Example → example}/features/screenshot_step_Ex.feature

@@ -8,4 +8,8 @@ Feature: Screenshot Step
 
  	Scenario: take screenshot
  	
- 		Then I take screenshot
+ 		Then I take screenshot
+
+ 	Scenario: close browser
+   		
+   		Then I close browser