ryansch-paperclip 2.3.10

data/LICENSE

@@ -0,0 +1,26 @@
+
+LICENSE
+
+The MIT License
+
+Copyright (c) 2008 Jon Yurek and thoughtbot, inc.
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+
+

data/README.md

@@ -0,0 +1,239 @@
+Paperclip
+=========
+
+Paperclip is intended as an easy file attachment library for ActiveRecord. The
+intent behind it was to keep setup as easy as possible and to treat files as
+much like other attributes as possible. This means they aren't saved to their
+final locations on disk, nor are they deleted if set to nil, until
+ActiveRecord::Base#save is called. It manages validations based on size and
+presence, if required. It can transform its assigned image into thumbnails if
+needed, and the prerequisites are as simple as installing ImageMagick (which,
+for most modern Unix-based systems, is as easy as installing the right
+packages). Attached files are saved to the filesystem and referenced in the
+browser by an easily understandable specification, which has sensible and
+useful defaults.
+
+See the documentation for `has_attached_file` in Paperclip::ClassMethods for
+more detailed options.
+
+The complete [RDoc](http://rdoc.info/gems/paperclip) is online.
+
+Changes in this repo
+------------
+
+Allowed to refresh images of classes with namespaces. For example:
+
+    rake paperclip:refresh CLASS='User::Asset'
+
+Requirements
+------------
+
+ImageMagick must be installed and Paperclip must have access to it. To ensure
+that it does, on your command line, run `which convert` (one of the ImageMagick
+utilities). This will give you the path where that utility is installed. For
+example, it might return `/usr/local/bin/convert`.
+
+Then, in your environment config file, let Paperclip know to look there by adding that 
+directory to its path.
+
+In development mode, you might add this line to `config/environments/development.rb)`:
+
+    Paperclip.options[:command_path] = "/usr/local/bin/"
+
+Installation
+------------
+
+Include the gem in your Gemfile:
+
+    gem "paperclip", "~> 2.3"
+
+Or as a plugin:
+
+  ruby script/plugin install git://github.com/thoughtbot/paperclip.git
+
+Quick Start
+-----------
+
+In your model:
+
+    class User < ActiveRecord::Base
+      has_attached_file :avatar, :styles => { :medium => "300x300>", :thumb => "100x100>" }
+    end
+
+In your migrations:
+
+    class AddAvatarColumnsToUser < ActiveRecord::Migration
+      def self.up
+        add_column :users, :avatar_file_name,    :string
+        add_column :users, :avatar_content_type, :string
+        add_column :users, :avatar_file_size,    :integer
+        add_column :users, :avatar_updated_at,   :datetime
+      end
+
+      def self.down
+        remove_column :users, :avatar_file_name
+        remove_column :users, :avatar_content_type
+        remove_column :users, :avatar_file_size
+        remove_column :users, :avatar_updated_at
+      end
+    end
+
+In your edit and new views:
+
+    <% form_for :user, @user, :url => user_path, :html => { :multipart => true } do |form| %>
+      <%= form.file_field :avatar %>
+    <% end %>
+
+In your controller:
+
+    def create
+      @user = User.create( params[:user] )
+    end
+
+In your show view:
+
+    <%= image_tag @user.avatar.url %>
+    <%= image_tag @user.avatar.url(:medium) %>
+    <%= image_tag @user.avatar.url(:thumb) %>
+
+Usage
+-----
+
+The basics of paperclip are quite simple: Declare that your model has an
+attachment with the has_attached_file method, and give it a name. Paperclip
+will wrap up up to four attributes (all prefixed with that attachment's name,
+so you can have multiple attachments per model if you wish) and give the a
+friendly front end. The attributes are `<attachment>_file_name`,
+`<attachment>_file_size`, `<attachment>_content_type`, and `<attachment>_updated_at`.
+Only `<attachment>_file_name` is required for paperclip to operate. More
+information about the options to has_attached_file is available in the
+documentation of Paperclip::ClassMethods.
+
+Attachments can be validated with Paperclip's validation methods,
+validates_attachment_presence, validates_attachment_content_type, and
+validates_attachment_size.
+
+Storage
+-------
+
+The files that are assigned as attachments are, by default, placed in the
+directory specified by the :path option to has_attached_file. By default, this
+location is ":rails_root/public/system/:attachment/:id/:style/:filename". This
+location was chosen because on standard Capistrano deployments, the
+public/system directory is symlinked to the app's shared directory, meaning it
+will survive between deployments. For example, using that :path, you may have a
+file at
+
+    /data/myapp/releases/20081229172410/public/system/avatars/13/small/my_pic.png
+
+_NOTE: This is a change from previous versions of Paperclip, but is overall a
+safer choice for the default file store._
+
+You may also choose to store your files using Amazon's S3 service. You can find
+more information about S3 storage at the description for
+Paperclip::Storage::S3.
+
+Files on the local filesystem (and in the Rails app's public directory) will be
+available to the internet at large. If you require access control, it's
+possible to place your files in a different location. You will need to change
+both the :path and :url options in order to make sure the files are unavailable
+to the public. Both :path and :url allow the same set of interpolated
+variables.
+
+Post Processing
+---------------
+
+Paperclip supports an extensible selection of post-processors. When you define
+a set of styles for an attachment, by default it is expected that those
+"styles" are actually "thumbnails". However, you can do much more than just
+thumbnail images. By defining a subclass of Paperclip::Processor, you can
+perform any processing you want on the files that are attached. Any file in
+your Rails app's lib/paperclip_processors directory is automatically loaded by
+paperclip, allowing you to easily define custom processors. You can specify a
+processor with the :processors option to has_attached_file:
+
+    has_attached_file :scan, :styles => { :text => { :quality => :better } },
+                             :processors => [:ocr]
+
+This would load the hypothetical class Paperclip::Ocr, which would have the
+hash "{ :quality => :better }" passed to it along with the uploaded file. For
+more information about defining processors, see Paperclip::Processor.
+
+The default processor is Paperclip::Thumbnail. For backwards compatability
+reasons, you can pass a single geometry string or an array containing a
+geometry and a format, which the file will be converted to, like so:
+
+    has_attached_file :avatar, :styles => { :thumb => ["32x32#", :png] }
+
+This will convert the "thumb" style to a 32x32 square in png format, regardless
+of what was uploaded. If the format is not specified, it is kept the same (i.e.
+jpgs will remain jpgs).
+
+Multiple processors can be specified, and they will be invoked in the order
+they are defined in the :processors array. Each successive processor will
+be given the result of the previous processor's execution. All processors will
+receive the same parameters, which are what you define in the :styles hash.
+For example, assuming we had this definition:
+
+    has_attached_file :scan, :styles => { :text => { :quality => :better } },
+                             :processors => [:rotator, :ocr]
+
+then both the :rotator processor and the :ocr processor would receive the
+options "{ :quality => :better }". This parameter may not mean anything to one
+or more or the processors, and they are expected to ignore it.
+
+_NOTE: Because processors operate by turning the original attachment into the
+styles, no processors will be run if there are no styles defined._
+
+Events
+------
+
+Before and after the Post Processing step, Paperclip calls back to the model
+with a few callbacks, allowing the model to change or cancel the processing
+step. The callbacks are `before_post_process` and `after_post_process` (which
+are called before and after the processing of each attachment), and the
+attachment-specific `before_<attachment>_post_process` and
+`after_<attachment>_post_process`. The callbacks are intended to be as close to
+normal ActiveRecord callbacks as possible, so if you return false (specifically
+- returning nil is not the same) in a before_ filter, the post processing step
+will halt. Returning false in an after_ filter will not halt anything, but you
+can access the model and the attachment if necessary.
+
+_NOTE: Post processing will not even *start* if the attachment is not valid
+according to the validations. Your callbacks and processors will *only* be
+called with valid attachments._
+
+Testing
+-------
+
+Paperclip provides rspec-compatible matchers for testing attachments. See the
+documentation on Paperclip::Shoulda::Matchers for more information.
+
+Contributing
+------------
+
+If you'd like to contribute a feature or bugfix: Thanks! To make sure your
+fix/feature has a high chance of being included, please read the following
+guidelines:
+
+1. Ask on the mailing list[http://groups.google.com/group/paperclip-plugin], or 
+   post a new GitHub Issue[http://github.com/thoughtbot/paperclip/issues].
+2. Make sure there are tests! We will not accept any patch that is not tested.
+   It's a rare time when explicit tests aren't needed. If you have questions
+   about writing tests for paperclip, please ask the mailing list.
+
+Credits
+-------
+
+![thoughtbot](http://thoughtbot.com/images/tm/logo.png)
+
+Paperclip is maintained and funded by [thoughtbot, inc](http://thoughtbot.com/community)
+
+Thank you to all [the contributors](https://github.com/thoughtbot/paperclip/contributors)!
+
+The names and logos for thoughtbot are trademarks of thoughtbot, inc.
+
+License
+-------
+
+Paperclip is Copyright © 2008-2011 thoughtbot. It is free software, and may be redistributed under the terms specified in the MIT-LICENSE file.

data/Rakefile

@@ -0,0 +1,80 @@
+require 'rubygems'
+require 'appraisal'
+require 'bundler/setup'
+
+require 'rake'
+require 'rake/testtask'
+require 'rake/rdoctask'
+
+$LOAD_PATH << File.join(File.dirname(__FILE__), 'lib')
+require 'paperclip'
+
+desc 'Default: run unit tests.'
+task :default => [:clean, :all]
+
+desc 'Test the paperclip plugin under all supported Rails versions.'
+task :all do |t|
+  exec('rake appraisal test')
+end
+
+desc 'Test the paperclip plugin.'
+Rake::TestTask.new(:test) do |t|
+  t.libs << 'lib' << 'profile'
+  t.pattern = 'test/**/*_test.rb'
+  t.verbose = true
+end
+
+desc 'Start an IRB session with all necessary files required.'
+task :shell do |t|
+  chdir File.dirname(__FILE__)
+  exec 'irb -I lib/ -I lib/paperclip -r rubygems -r active_record -r tempfile -r init'
+end
+
+desc 'Generate documentation for the paperclip plugin.'
+Rake::RDocTask.new(:rdoc) do |rdoc|
+  rdoc.rdoc_dir = 'doc'
+  rdoc.title    = 'Paperclip'
+  rdoc.options << '--line-numbers' << '--inline-source'
+  rdoc.rdoc_files.include('README*')
+  rdoc.rdoc_files.include('lib/**/*.rb')
+end
+
+desc 'Update documentation on website'
+task :sync_docs => 'rdoc' do
+  `rsync -ave ssh doc/ dev@dev.thoughtbot.com:/home/dev/www/dev.thoughtbot.com/paperclip`
+end
+
+desc 'Clean up files.'
+task :clean do |t|
+  FileUtils.rm_rf "doc"
+  FileUtils.rm_rf "tmp"
+  FileUtils.rm_rf "pkg"
+  FileUtils.rm_rf "public"
+  FileUtils.rm "test/debug.log" rescue nil
+  FileUtils.rm "test/paperclip.db" rescue nil
+  Dir.glob("paperclip-*.gem").each{|f| FileUtils.rm f }
+end
+
+desc 'Build the gemspec.'
+task :gemspec do |t|
+  exec 'gem build paperclip.gemspec'
+end
+
+desc "Print a list of the files to be put into the gem"
+task :manifest => :clean do
+  spec.files.each do |file|
+    puts file
+  end
+end
+
+desc "Generate a gemspec file for GitHub"
+task :gemspec => :clean do
+  File.open("#{spec.name}.gemspec", 'w') do |f|
+    f.write spec.to_ruby
+  end
+end
+
+desc "Build the gem into the current directory"
+task :gem => :gemspec do
+  `gem build #{spec.name}.gemspec`
+end

data/generators/paperclip/USAGE

@@ -0,0 +1,5 @@
+Usage:
+
+  script/generate paperclip Class attachment1 (attachment2 ...)
+
+This will create a migration that will add the proper columns to your class's table.

data/generators/paperclip/paperclip_generator.rb

@@ -0,0 +1,27 @@
+class PaperclipGenerator < Rails::Generator::NamedBase
+  attr_accessor :attachments, :migration_name
+
+  def initialize(args, options = {})
+    super
+    @class_name, @attachments = args[0], args[1..-1]
+  end
+
+  def manifest
+    file_name = generate_file_name
+    @migration_name = file_name.camelize
+    record do |m|
+      m.migration_template "paperclip_migration.rb.erb",
+                           File.join('db', 'migrate'),
+                           :migration_file_name => file_name
+    end
+  end
+
+  private
+
+  def generate_file_name
+    names = attachments.map{|a| a.underscore }
+    names = names[0..-2] + ["and", names[-1]] if names.length > 1
+    "add_attachments_#{names.join("_")}_to_#{@class_name.underscore}"
+  end
+
+end

data/generators/paperclip/templates/paperclip_migration.rb.erb

@@ -0,0 +1,19 @@
+class <%= migration_name %> < ActiveRecord::Migration
+  def self.up
+<% attachments.each do |attachment| -%>
+    add_column :<%= class_name.underscore.camelize.tableize %>, :<%= attachment %>_file_name, :string
+    add_column :<%= class_name.underscore.camelize.tableize %>, :<%= attachment %>_content_type, :string
+    add_column :<%= class_name.underscore.camelize.tableize %>, :<%= attachment %>_file_size, :integer
+    add_column :<%= class_name.underscore.camelize.tableize %>, :<%= attachment %>_updated_at, :datetime
+<% end -%>
+  end
+
+  def self.down
+<% attachments.each do |attachment| -%>
+    remove_column :<%= class_name.underscore.camelize.tableize %>, :<%= attachment %>_file_name
+    remove_column :<%= class_name.underscore.camelize.tableize %>, :<%= attachment %>_content_type
+    remove_column :<%= class_name.underscore.camelize.tableize %>, :<%= attachment %>_file_size
+    remove_column :<%= class_name.underscore.camelize.tableize %>, :<%= attachment %>_updated_at
+<% end -%>
+  end
+end

data/init.rb

@@ -0,0 +1 @@
+require File.join(File.dirname(__FILE__), "lib", "paperclip")

data/lib/generators/paperclip/USAGE

@@ -0,0 +1,8 @@
+Description:
+    Explain the generator
+
+Example:
+    rails generate paperclip Thing
+
+    This will create:
+        what/will/it/create

data/lib/generators/paperclip/paperclip_generator.rb

@@ -0,0 +1,31 @@
+require 'rails/generators/active_record'
+
+class PaperclipGenerator < ActiveRecord::Generators::Base
+  desc "Create a migration to add paperclip-specific fields to your model."
+
+  argument :attachment_names, :required => true, :type => :array, :desc => "The names of the attachment(s) to add.",
+           :banner => "attachment_one attachment_two attachment_three ..."
+
+  def self.source_root
+    @source_root ||= File.expand_path('../templates', __FILE__)
+  end
+
+  def generate_migration
+    migration_template "paperclip_migration.rb.erb", "db/migrate/#{migration_file_name}"
+  end
+
+  protected
+
+  def migration_name
+    "add_attachment_#{attachment_names.join("_")}_to_#{name.underscore}"
+  end
+
+  def migration_file_name
+    "#{migration_name}.rb"
+  end
+
+  def migration_class_name
+    migration_name.camelize
+  end
+
+end