ruby-xz 0.0.1

data/README.rdoc

@@ -0,0 +1,75 @@
+= ruby-xz
+
+<b>ruby-xz</b> is a basic binding to the famous
+{liblzma library}[http://tukaani.org/xz/], best known for the
+extreme compression-ratio it's native +XZ+ format achieves. ruby-xz gives
+you the possibility of creating and extracting XZ archives on any platform
+where liblzma is installed. No compilation is needed, because ruby-xz is
+written ontop of ffi[https://github.com/ffi/ffi].
+
+== Installation
+
+Install it the way you install all your gems.
+
+  # gem install ruby-xz
+
+== Usage
+
+The documentation of the XZ module is well and you should be able to find
+everything you need to use ruby-xz. As said, it's not big, but powerful:
+You can create and extract whole archive files, compress or decompress
+streams of data or just plain strings.
+
+=== First step
+
+You have to require ruby-xz. Note the file you have to require is named
+"xz.rb", so do
+
+  require "xz"
+  
+to get it.
+
+=== Examples
+
+  #Compress a TAR archive
+  XZ.compress_file("myfile.tar", "myfile.tar.xz")
+  #Decompress it
+  XZ.decompress_file("myfile.tar.xz", "myfile.tar")
+  
+  #Compress everything you get from a socket (note that there HAS to be a EOF
+  #sometime, otherwise this will run infinitely)
+  XZ.compress_stream(socket){|chunk| opened_file.write(chunk)}
+  
+  #Compress a string
+  comp = XZ.compress("Mydata")
+  #Decompress it
+  data = XZ.decompress(comp)
+
+Have a look at the XZ module's documentation for an in-depth description of
+what is possible.
+
+=== License
+
+(The MIT License)
+
+Basic liblzma-bindings for Ruby.
+
+Copyright © 2011 Marvin Gülker
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the ‘Software’),
+to deal in the Software without restriction, including without limitation
+the rights to use, copy, modify, merge, publish, distribute, sublicense,
+and/or sell copies of the Software, and to permit persons to whom the Software
+is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED ‘AS IS’, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.

data/lib/xz.rb

@@ -0,0 +1,457 @@
+#Encoding: UTF-8
+=begin (The MIT License)
+
+Basic liblzma-bindings for Ruby.
+
+Copyright © 2011 Marvin Gülker
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the ‘Software’),
+to deal in the Software without restriction, including without limitation
+the rights to use, copy, modify, merge, publish, distribute, sublicense,
+and/or sell copies of the Software, and to permit persons to whom the Software
+is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in all
+copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED ‘AS IS’, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+THE SOFTWARE.
+=end
+
+require "ffi"
+
+#The namespace and main module of this library. Each method of this module
+#may raise exceptions of class XZ::LZMAError, which is not named in the
+#methods' documentations anymore.
+module XZ
+  
+  #This module wraps functions and enums used by liblzma.
+  module LibLZMA
+    extend FFI::Library
+    
+    #The maximum value of an uint64_t, as defined by liblzma.
+    #Should be the same as
+    #  (2 ** 64) - 1
+    UINT64_MAX = 18446744073709551615
+    
+    #Activates extreme compression. Same as xz's "-e" commandline switch.
+    LZMA_PRESET_EXTREME = 1 << 31
+    
+    LZMA_TELL_NO_CHECK = 0x02
+    LZMA_TELL_UNSUPPORTED_CHECK = 0x02
+    LZMA_TELL_ANY_CHECK = 0x04
+    LZMA_CONCATENATED = 0x08
+    
+    #Placeholder enum used by liblzma for later additions.
+    LZMA_RESERVED_ENUM = enum :lzma_reserved_enum, 0
+    
+    #Actions that can be passed to the lzma_code() function.
+    LZMA_ACTION = enum  :lzma_run, 0,
+                        :lzma_sync_flush,
+                        :lzma_full_flush,
+                        :lzma_finish
+                        
+    #Integrity check algorithms supported by liblzma.
+    LZMA_CHECK = enum :lzma_check_none, 0,
+                      :lzma_check_crc32, 1,
+                      :lzma_check_crc64, 4,
+                      :lzma_check_sha256, 10
+                      
+    #Possible return values of liblzma functions.
+    LZMA_RET = enum :lzma_ok, 0,
+                    :lzma_stream_end,
+                    :lzma_no_check,
+                    :lzma_unsupported_check,
+                    :lzma_get_check,
+                    :lzma_mem_error,
+                    :lzma_memlimit_error,
+                    :lzma_format_error,
+                    :lzma_options_error,
+                    :lzma_data_error,
+                    :lzma_buf_error,
+                    :lzma_prog_error
+    
+    ffi_lib "liblzma"
+    
+    attach_function :lzma_easy_encoder, [:pointer, :uint32, :int], :int
+    attach_function :lzma_code, [:pointer, :int], :int
+    attach_function :lzma_stream_decoder, [:pointer, :uint64, :uint32], :int
+    attach_function :lzma_end, [:pointer], :void
+    
+  end
+  
+  #The class of the error that this library raises.
+  class LZMAError < StandardError
+    
+    #Raises an appropriate exception if +val+ isn't a liblzma success code.
+    def self.raise_if_necessary(val)
+      case val
+      when :lzma_mem_error then raise(self, "Couldn't allocate memory!")
+      when :lzma_memlimit_error then raise(self, "Decoder ran out of (allowed) memory!")
+      when :lzma_format_error then raise(self, "Unrecognized file format!")
+      when :lzma_options_error then raise(self, "Invalid options passed!")
+      when :lzma_data_error then raise raise(self, "Archive is currupt.")
+      when :lzma_buf_error then raise(self, "Buffer unusable!")
+      when :lzma_prog_error then raise(self, "Program error--if you're sure your code is correct, you may have found a bug in liblzma.")
+      end
+    end
+    
+  end
+  
+  #The main struct of the liblzma library.
+  class LZMAStream < FFI::Struct
+    layout  :next_in, :pointer, #uint8
+            :avail_in, :size_t,
+            :total_in, :uint64,
+            :next_out, :pointer, #uint8
+            :avail_out, :size_t,
+            :total_out, :uint64,
+            :lzma_allocator, :pointer,
+            :lzma_internal, :pointer,
+            :reserved_ptr1, :pointer,
+            :reserved_ptr2, :pointer,
+            :reserved_ptr3, :pointer,
+            :reserved_ptr4, :pointer,
+            :reserved_int1, :uint64,
+            :reserved_int2, :uint64,
+            :reserved_int3, :size_t,
+            :reserved_int4, :size_t,
+            :reserved_enum1, :int,
+            :reserved_enum2, :int
+            
+            #This method does basicly the same thing as the
+            #LZMA_STREAM_INIT macro of liblzma. Creates a new LZMAStream
+            #that has been initialized for usage. If any argument is passed,
+            #it is assumed to be a FFI::Pointer to a lzma_stream structure
+            #and that structure is wrapped.
+            def initialize(*args)
+              if args.empty? #Got a pointer, want to wrap it
+                super
+              else
+                s = super()
+                s[:next] = nil
+                s[:avail_in] = 0
+                s[:total_in] = 0
+                s[:next_out] = nil
+                s[:avail_out] = 0
+                s[:total_out] = 0
+                s[:lzma_allocator] = nil
+                s[:lzma_internal] = nil
+                s[:reserved_ptr1] = nil
+                s[:reserved_ptr2] = nil
+                s[:reserved_ptr3] = nil
+                s[:reserved_ptr4] = nil
+                s[:reserved_int1] = 0
+                s[:reserved_int2] = 0
+                s[:reserved_int3] = 0
+                s[:reserved_int4] = 0
+                s[:reserved_enum1] = LibLZMA::LZMA_RESERVED_ENUM[:lzma_reserved_enum]
+                s[:reserved_enum2] = LibLZMA::LZMA_RESERVED_ENUM[:lzma_reserved_enum]
+                s
+              end
+            end
+          end
+  
+  #Number of bytes read in one chunk.
+  CHUNK_SIZE = 4096
+  #The version of this library.
+  VERSION = "0.0.1".freeze
+  
+  class << self
+    
+    #call-seq:
+    #  decompress_stream(io [, memory_limit [, flags ] ] )               → a_string
+    #  decompress_stream(io [, memory_limit [, flags ] ] ){|chunk| ... } → an_integer
+    #  decode_stream(io [, memory_limit [, flags ] ] )                   → a_string
+    #  decode_stream(io [, memory_limit [, flags ] ] ){|chunk| ... }     → an_integer
+    #
+    #Decompresses a stream containing XZ-compressed data.
+    #===Parameters
+    #[io]           The IO to read from. It must be opened for reading.
+    #[memory_limit] (+UINT64_MAX+) If not XZ::LibLZMA::UINT64_MAX, makes liblzma
+    #               use no more memory than +memory_limit+ bytes.
+    #[flags]        (<tt>[:tell_unsupported_check]</tt>) Additional flags
+    #               passed to liblzma (an array). Possible flags are:
+    #               [:tell_no_check] Spit out a warning if the archive hasn't an
+    #                                itnegrity checksum.
+    #               [:tell_unsupported_check] Spit out a warning if the archive
+    #                                         has an unsupported checksum type.
+    #               [:concatenated] Decompress concatenated archives.
+    #[chunk]        (Block argument) One piece of decompressed data.
+    #===Return value
+    #If a block was given, returns the number of bytes written. Otherwise,
+    #returns the decompressed data as a BINARY-encoded string.
+    #===Example
+    #  data = File.open("archive.xz", "rb"){|f| f.read}
+    #  io = StringIO.new(data)
+    #  XZ.decompress_stream(io) #=> "I AM THE DATA"
+    #  io.rewind
+    #  str = ""
+    #  XZ.decompress_stream(io, XZ::LibLZMA::UINT64_MAX, [:tell_no_check]){|c| str << c} #=> 13
+    #  str #=> "I AM THE DATA"
+    #===Remarks
+    #The block form is *much* better on memory usage, because it doesn't have
+    #to load everything into RAM at once. If you don't know how big your
+    #data gets or if you want to decompress much data, use the block form. Of
+    #course you shouldn't store the data your read in RAM then as in the
+    #example above.
+    def decompress_stream(io, memory_limit = LibLZMA::UINT64_MAX, flags = [:tell_unsupported_check], &block)
+      raise(ArgumentError, "Invalid memory limit set!") unless (0..LibLZMA::UINT64_MAX).include?(memory_limit)
+      flags.each do |flag|
+        raise(ArgumentError, "Unknown flag #{flag}!") unless [:tell_no_check, :tell_unsupported_check, :tell_any_check, :concatenated].include?(flag)
+      end
+      
+      stream = LZMAStream.new
+      res = LibLZMA.lzma_stream_decoder(
+        stream.pointer,
+        memory_limit,
+        flags.inject(0){|val, flag| val | LibLZMA.const_get(:"LZMA_#{flag.upcase}")}
+      )
+      
+      LZMAError.raise_if_necessary(res)
+      
+      res = ""
+      if block_given?
+        res = lzma_code(io, stream, &block)
+      else
+        lzma_code(io, stream){|chunk| res << chunk}
+      end
+      
+      LibLZMA.lzma_end(stream.pointer)
+      
+      block_given? ? stream[:total_out] : res
+    end
+    alias decode_stream decompress_stream
+    
+    #call-seq:
+    #  compress_stream(io [, compression_level [, check [, extreme ] ] ] ) → a_string
+    #  compress_stream(io [, compression_level [, check [, extreme ] ] ] ){|chunk| ... } → an_integer
+    #  encode_stream(io [, compression_level [, check [, extreme ] ] ] ) → a_string
+    #  encode_stream(io [, compression_level [, check [, extreme ] ] ] ){|chunk| ... } → an_integer
+    #
+    #Compresses a stream of data into XZ-compressed data.
+    #===Parameters
+    #[io]                The IO to read the data from. Must be opened for
+    #                    reading.
+    #[compression_level] (6) Compression strength. Higher values indicate a
+    #                    smaller result, but longer compression time. Maximum
+    #                    is 9.
+    #[check]             (:crc64) The checksum algorithm to use for verifying
+    #                    the data inside the archive. Possible values are:
+    #                    * :none
+    #                    * :crc32
+    #                    * :crc64
+    #                    * :sha256
+    #[extreme]           (false) Tries to get the last bit out of the
+    #                    compression. This may succeed, but you can end
+    #                    up with *very* long computation times.
+    #[chunk]             (Block argument) One piece of compressed data.
+    #===Return value
+    #If a block was given, returns the number of bytes written. Otherwise,
+    #returns the compressed data as a BINARY-encoded string.
+    #===Example
+    #  data = File.read("file.txt")
+    #  i = StringIO.new(data)
+    #  XZ.compress_stream(i) #=> Some binary blob
+    #  i.rewind
+    #  str = ""
+    #  XZ.compress_stream(i, 4, :sha256){|c| str << c} #=> 123
+    #  str #=> Some binary blob
+    #===Remarks
+    #The block form is *much* better on memory usage, because it doesn't have
+    #to load everything into RAM at once. If you don't know how big your
+    #data gets or if you want to compress much data, use the block form. Of
+    #course you shouldn't store the data your read in RAM then as in the
+    #example above.
+    def compress_stream(io, compression_level = 6, check = :crc64, extreme = false, &block)
+      raise(ArgumentError, "Invalid compression level!") unless (0..9).include?(compression_level)
+      raise(ArgumentError, "Invalid checksum specified!") unless [:none, :crc32, :crc64, :sha256].include?(check)
+      
+      stream = LZMAStream.new
+      res = LibLZMA.lzma_easy_encoder(
+      stream.pointer,
+      compression_level | (extreme ? LibLZMA::LZMA_PRESET_EXTREME : 0),
+      LibLZMA::LZMA_CHECK[:"lzma_check_#{check}"]
+      )
+      
+      LZMAError.raise_if_necessary(res)
+      
+      res = ""
+      if block_given?
+        res = lzma_code(io, stream, &block)
+      else
+        lzma_code(io, stream){|chunk| res << chunk}
+      end
+      
+      LibLZMA.lzma_end(stream.pointer)
+      
+      block_given? ? stream[:total_out] : res
+    end
+    alias encode_stream compress_stream
+    
+    #Compresses +in_file+ and writes the result to +out_file+.
+    #===Parameters
+    #[in_file]  The path to the file to read from.
+    #[out_file] The path of the file to write to. If it exists, it will be
+    #           overwritten.
+    #For the other parameters, see the compress_stream method.
+    #===Return value
+    #The number of bytes written, i.e. the size of the archive.
+    #===Example
+    #  XZ.compress("myfile.txt", "myfile.txt.xz")
+    #  XZ.compress("myarchive.tar", "myarchive.tar.xz")
+    #===Remarks
+    #This method is safe to use with big files, because files are not loaded
+    #into memory completely at once.
+    def compress_file(in_file, out_file, compression_level = 6, check = :crc64, extreme = false)
+      File.open(in_file, "rb") do |i_file|
+        File.open(out_file, "wb") do |o_file|
+          compress_stream(i_file, compression_level, check, extreme) do |chunk|
+            o_file.write(chunk)
+          end
+        end
+      end
+    end
+    
+    #Compresses arbitrary data using the XZ algorithm.
+    #===Parameters
+    #[str] The data to compress.
+    #For the other parameters, see the compress_stream method.
+    #===Return value
+    #The compressed data as a BINARY-encoded string.
+    #===Example
+    #  data = "I love Ruby"
+    #  comp = XZ.compress(data) #=> binary blob
+    #===Remarks
+    #Don't use this method for big amounts of data--you may run out of
+    #memory. Use compress_file or compress_stream instead.
+    def compress(str, compression_level = 6, check = :crc64, extreme = false)
+      raise(NotImplementedError, "StringIO isn't available!") unless defined? StringIO
+      s = StringIO.new(str)
+      compress_stream(s, compression_level, check, extreme)
+    end
+    
+    #Decompresses data in XZ format.
+    #===Parameters
+    #[str] The data to decompress.
+    #For the other parameters, see the decompress_stream method.
+    #===Return value
+    #The decompressed data as a BINARY-encoded string.
+    #===Example
+    #  comp = File.open("data.xz", "rb"){|f| f.read}
+    #  data = XZ.decompress(comp) #=> "I love Ruby"
+    #===Remarks
+    #Don't use this method for big amounts of data--you may run out of
+    #memory. Use decompress_file or decompress_stream instead.
+    def decompress(str, memory_limit = LibLZMA::UINT64_MAX, flags = [:tell_unsupported_check])
+      raise(NotImplementedError, "StringIO isn't available!") unless defined? StringIO
+      s = StringIO.new(str)
+      decompress_stream(s, memory_limit, flags)
+    end
+    
+    #Decompresses +in_file+ and writes the result to +out_file+.
+    #===Parameters
+    #[in_file]  The path to the file to read from.
+    #[out_file] The path of the file to write to. If it exists, it will
+    #           be overwritten.
+    #For the other parameters, see the decompress_stream method.
+    #===Return value
+    #The number of bytes written, i.e. the size of the uncompressed data.
+    #===Example
+    #  XZ.decompres("myfile.txt.xz", "myfile.txt")
+    #  XZ.decompress("myarchive.tar.xz", "myarchive.tar")
+    #===Remarks
+    #This method is safe to use with big files, because files are not loaded
+    #into memory completely at once.
+    def decompress_file(in_file, out_file, memory_limit = LibLZMA::UINT64_MAX, flags = [:tell_unsupported_check])
+      File.open(in_file, "rb") do |i_file|
+        File.open(out_file, "wb") do |o_file|
+          decompress_stream(i_file, memory_limit, flags) do |chunk|
+            o_file.write(chunk)
+          end
+        end
+      end
+    end
+    
+    private
+    
+    #This method returns the size of +str+ in bytes.
+    def binary_size(str)
+      #Believe it or not, but this is faster than str.bytes.to_a.size.
+      #I benchmarked it, and it is as twice as fast.
+      str.dup.force_encoding("BINARY").size
+    end
+    
+    #This method does the heavy work of (de-)compressing a stream. It takes
+    #an IO object to read data from (that means the IO must be opened
+    #for reading) and a XZ::LZMAStream object that is used to (de-)compress
+    #the data. Furthermore this method takes a block which gets passed
+    #the (de-)compressed data in chunks one at a time--this is needed to allow
+    #(de-)compressing of very large files that can't be loaded fully into
+    #memory.
+    def lzma_code(io, stream)
+      input_buffer_p = FFI::MemoryPointer.new(CHUNK_SIZE)
+      output_buffer_p = FFI::MemoryPointer.new(CHUNK_SIZE)
+      
+      while str = io.read(CHUNK_SIZE)
+        input_buffer_p.write_string(str)
+        
+        #Set the data for compressing
+        stream[:next_in] = input_buffer_p
+        stream[:avail_in] = binary_size(str)
+        
+        #Now loop until we gathered all the data in stream[:next_out]. Depending on the
+        #amount of data, this may not fit into the buffer, meaning that we have to
+        #provide a pointer to a "new" buffer that liblzma can write into. Since
+        #liblzma already set stream[:avail_in] to 0 in the first iteration, the extra call to the
+        #lzma_code() function doesn't hurt (indeed the pipe_comp example from
+        #liblzma handles it this way too). Sometimes it happens that the compressed data
+        #is bigger than the original (notably when the amount of data to compress
+        #is small)
+        loop do
+          #Prepare for getting the compressed_data
+          stream[:next_out] = output_buffer_p
+          stream[:avail_out] = CHUNK_SIZE
+          
+          #Compress the data
+          res = if io.eof?
+            LibLZMA.lzma_code(stream.pointer, LibLZMA::LZMA_ACTION[:lzma_finish])
+          else
+            LibLZMA.lzma_code(stream.pointer, LibLZMA::LZMA_ACTION[:lzma_run])
+          end
+          check_lzma_code_retval(res)
+          
+          #Write the compressed data
+          data = output_buffer_p.read_string(CHUNK_SIZE - stream[:avail_out])
+          yield(data)
+          
+          #If the buffer is completely filled, it's likely that there is
+          #more data liblzma wants to hand to us. Start a new iteration,
+          #but don't provide new input data.
+          break unless stream[:avail_out] == 0
+        end #loop
+      end #while
+    end #lzma_code
+    
+    #Checks for errors and warnings that can be derived from the return
+    #value of the lzma_code() function and shows them if necessary.
+    def check_lzma_code_retval(code)
+      e = LibLZMA::LZMA_RET
+      case code
+      when e[:lzma_no_check] then warn("Couldn't verify archive integrity--archive has not integrity checksum.")
+      when e[:lzma_unsupported_check] then warn("Couldn't verify archive integrity--archive has an unsupported integrity checksum.")
+      when e[:lzma_get_check] then nil #This isn't useful for us. It indicates that the checksum type is now known.
+      else
+        LZMAError.raise_if_necessary(code)
+      end
+    end
+    
+  end #class << self
+  
+end

metadata

@@ -0,0 +1,83 @@
+--- !ruby/object:Gem::Specification
+name: ruby-xz
+version: !ruby/object:Gem::Version
+  version: 0.0.1
+  prerelease: 
+platform: ruby
+authors:
+- Marvin Gülker
+autorequire: 
+bindir: bin
+cert_chain: []
+date: 2011-03-16 00:00:00.000000000 +01:00
+default_executable: 
+dependencies:
+- !ruby/object:Gem::Dependency
+  name: ffi
+  requirement: &15267800 !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ! '>='
+      - !ruby/object:Gem::Version
+        version: '0'
+  type: :runtime
+  prerelease: false
+  version_requirements: *15267800
+- !ruby/object:Gem::Dependency
+  name: hanna-nouveau
+  requirement: &15267300 !ruby/object:Gem::Requirement
+    none: false
+    requirements:
+    - - ! '>='
+      - !ruby/object:Gem::Version
+        version: '0'
+  type: :development
+  prerelease: false
+  version_requirements: *15267300
+description: ! 'This is a basic binding for liblzma that allows you to
+
+  create and extract XZ-compressed archives. It can cope with big
+
+  files as well as small ones, but doesn''t offer much
+
+  of the possibilities liblzma itself has.
+
+'
+email: sutniuq@gmx.net
+executables: []
+extensions: []
+extra_rdoc_files:
+- README.rdoc
+files:
+- lib/xz.rb
+- README.rdoc
+has_rdoc: true
+homepage: 
+licenses: []
+post_install_message: 
+rdoc_options:
+- -t
+- ruby-xz RDocs
+- -m
+- README.rdoc
+require_paths:
+- lib
+required_ruby_version: !ruby/object:Gem::Requirement
+  none: false
+  requirements:
+  - - ! '>='
+    - !ruby/object:Gem::Version
+      version: '1.9'
+required_rubygems_version: !ruby/object:Gem::Requirement
+  none: false
+  requirements:
+  - - ! '>='
+    - !ruby/object:Gem::Version
+      version: '0'
+requirements: []
+rubyforge_project: 
+rubygems_version: 1.6.2
+signing_key: 
+specification_version: 3
+summary: XZ compression via liblzma for Ruby.
+test_files: []