resolv-replace 0.1.0

checksums.yaml

@@ -0,0 +1,7 @@
+---
+SHA256:
+  metadata.gz: 23c53e4293723e3d0cc154a04b18370e890f9443679fbf77c4a123f17288238e
+  data.tar.gz: 7d9c4e6b49d1885e3a996dd042c91960c6b4b457f60f9f5578aa58a91d314483
+SHA512:
+  metadata.gz: c060c5efc855fee8c97f9da9108d684a4a9abc7363afecc3cfd81fa1b02282dac403a94f512429ceb2ee4f6fa1c1516bde6e57551ce979c70be38ced84ee6beb
+  data.tar.gz: 4d105f9bfd70e91652abc095fa951df6b9f2dddddb66a3a03e00dfcb5778f1b813ceee3ae07569f844d5c3b8a07cb1f48006bea79afca3ccbd492f99ca7a72b5

data/.gitignore

@@ -0,0 +1,8 @@
+/.bundle/
+/.yardoc
+/_yardoc/
+/coverage/
+/doc/
+/pkg/
+/spec/reports/
+/tmp/

data/Gemfile

@@ -0,0 +1,4 @@
+source "https://rubygems.org"
+
+gem "rake"
+e 

data/LICENSE.txt

@@ -0,0 +1,22 @@
+Copyright (C) 1993-2013 Yukihiro Matsumoto. All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+1. Redistributions of source code must retain the above copyright
+notice, this list of conditions and the following disclaimer.
+2. Redistributions in binary form must reproduce the above copyright
+notice, this list of conditions and the following disclaimer in the
+documentation and/or other materials provided with the distribution.
+
+THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGE.

data/README.md

@@ -0,0 +1,30 @@
+# resolv-replace.rb
+
+Replace Socket DNS with Resolv
+
+## Installation
+
+Add this line to your application's Gemfile:
+
+```ruby
+gem 'resolv-replace'
+```
+
+And then execute:
+
+    $ bundle install
+
+Or install it yourself as:
+
+    $ gem install resolv-replace
+
+## Development
+
+After checking out the repo, run `bin/setup` to install dependencies. Then, run `rake test` to run the tests. You can also run `bin/console` for an interactive prompt that will allow you to experiment.
+
+To install this gem onto your local machine, run `bundle exec rake install`. To release a new version, update the version number in `version.rb`, and then run `bundle exec rake release`, which will create a git tag for the version, push git commits and tags, and push the `.gem` file to [rubygems.org](https://rubygems.org).
+
+## Contributing
+
+Bug reports and pull requests are welcome on GitHub at https://github.com/ruby/resolv-replace.
+

data/Rakefile

@@ -0,0 +1 @@
+require "bundler/gem_tasks"

data/bin/console

@@ -0,0 +1,14 @@
+#!/usr/bin/env ruby
+
+require "bundler/setup"
+require "resolv/replace"
+
+# You can add fixtures and/or initialization code here to make experimenting
+# with your gem easier. You can also use a different console, if you like.
+
+# (If you use this, don't forget to add pry to your Gemfile!)
+# require "pry"
+# Pry.start
+
+require "irb"
+IRB.start(__FILE__)

data/bin/setup

@@ -0,0 +1,8 @@
+#!/usr/bin/env bash
+set -euo pipefail
+IFS=$'\n\t'
+set -vx
+
+bundle install
+
+# Do any other automated setup that you need to do here

data/lib/resolv-replace.rb

@@ -0,0 +1,76 @@
+# frozen_string_literal: true
+
+require 'socket'
+require 'resolv'
+
+class << IPSocket
+  # :stopdoc:
+  alias original_resolv_getaddress getaddress
+  # :startdoc:
+  def getaddress(host)
+    begin
+      return Resolv.getaddress(host).to_s
+    rescue Resolv::ResolvError
+      raise SocketError, "Hostname not known: #{host}"
+    end
+  end
+end
+
+class TCPSocket < IPSocket
+  # :stopdoc:
+  alias original_resolv_initialize initialize
+  # :startdoc:
+  def initialize(host, serv, *rest)
+    rest[0] = IPSocket.getaddress(rest[0]) if rest[0]
+    original_resolv_initialize(IPSocket.getaddress(host), serv, *rest)
+  end
+end
+
+class UDPSocket < IPSocket
+  # :stopdoc:
+  alias original_resolv_bind bind
+  # :startdoc:
+  def bind(host, port)
+    host = IPSocket.getaddress(host) if host != ""
+    original_resolv_bind(host, port)
+  end
+
+  # :stopdoc:
+  alias original_resolv_connect connect
+  # :startdoc:
+  def connect(host, port)
+    original_resolv_connect(IPSocket.getaddress(host), port)
+  end
+
+  # :stopdoc:
+  alias original_resolv_send send
+  # :startdoc:
+  def send(mesg, flags, *rest)
+    if rest.length == 2
+      host, port = rest
+      begin
+        addrs = Resolv.getaddresses(host)
+      rescue Resolv::ResolvError
+        raise SocketError, "Hostname not known: #{host}"
+      end
+      addrs[0...-1].each {|addr|
+        begin
+          return original_resolv_send(mesg, flags, addr, port)
+        rescue SystemCallError
+        end
+      }
+      original_resolv_send(mesg, flags, addrs[-1], port)
+    else
+      original_resolv_send(mesg, flags, *rest)
+    end
+  end
+end
+
+class SOCKSSocket < TCPSocket
+  # :stopdoc:
+  alias original_resolv_initialize initialize
+  # :startdoc:
+  def initialize(host, serv)
+    original_resolv_initialize(IPSocket.getaddress(host), port)
+  end
+end if defined? SOCKSSocket

data/resolv-replace.gemspec

@@ -0,0 +1,24 @@
+Gem::Specification.new do |spec|
+  spec.name          = "resolv-replace"
+  spec.version       = "0.1.0"
+  spec.authors       = ["Tanaka Akira"]
+  spec.email         = ["akr@fsij.org"]
+
+  spec.summary       = %q{Replace Socket DNS with Resolv.}
+  spec.description   = %q{Replace Socket DNS with Resolv.}
+  spec.homepage      = "https://github.com/ruby/resolv-replace"
+  spec.required_ruby_version = Gem::Requirement.new(">= 2.3.0")
+  spec.licenses      = ["Ruby", "BSD-2-Clause"]
+
+  spec.metadata["homepage_uri"] = spec.homepage
+  spec.metadata["source_code_uri"] = spec.homepage
+
+  spec.files         = Dir.chdir(File.expand_path('..', __FILE__)) do
+    `git ls-files -z`.split("\x0").reject { |f| f.match(%r{^(test|spec|features)/}) }
+  end
+  spec.bindir        = "exe"
+  spec.executables   = spec.files.grep(%r{^exe/}) { |f| File.basename(f) }
+  spec.require_paths = ["lib"]
+
+  spec.add_dependency "resolv"
+end

metadata

@@ -0,0 +1,69 @@
+--- !ruby/object:Gem::Specification
+name: resolv-replace
+version: !ruby/object:Gem::Version
+  version: 0.1.0
+platform: ruby
+authors:
+- Tanaka Akira
+autorequire:
+bindir: exe
+cert_chain: []
+date: 2020-09-18 00:00:00.000000000 Z
+dependencies:
+- !ruby/object:Gem::Dependency
+  name: resolv
+  requirement: !ruby/object:Gem::Requirement
+    requirements:
+    - - ">="
+      - !ruby/object:Gem::Version
+        version: '0'
+  type: :runtime
+  prerelease: false
+  version_requirements: !ruby/object:Gem::Requirement
+    requirements:
+    - - ">="
+      - !ruby/object:Gem::Version
+        version: '0'
+description: Replace Socket DNS with Resolv.
+email:
+- akr@fsij.org
+executables: []
+extensions: []
+extra_rdoc_files: []
+files:
+- ".gitignore"
+- Gemfile
+- LICENSE.txt
+- README.md
+- Rakefile
+- bin/console
+- bin/setup
+- lib/resolv-replace.rb
+- resolv-replace.gemspec
+homepage: https://github.com/ruby/resolv-replace
+licenses:
+- Ruby
+- BSD-2-Clause
+metadata:
+  homepage_uri: https://github.com/ruby/resolv-replace
+  source_code_uri: https://github.com/ruby/resolv-replace
+post_install_message:
+rdoc_options: []
+require_paths:
+- lib
+required_ruby_version: !ruby/object:Gem::Requirement
+  requirements:
+  - - ">="
+    - !ruby/object:Gem::Version
+      version: 2.3.0
+required_rubygems_version: !ruby/object:Gem::Requirement
+  requirements:
+  - - ">="
+    - !ruby/object:Gem::Version
+      version: '0'
+requirements: []
+rubygems_version: 3.2.0.rc.1
+signing_key:
+specification_version: 4
+summary: Replace Socket DNS with Resolv.
+test_files: []