pry-theme 0.1.3 → 0.2.0

checksums.yaml

@@ -0,0 +1,15 @@
+---
+!binary "U0hBMQ==":
+  metadata.gz: !binary |-
+    ZjgyNDZhYTQxYjhiNTNmMDQ5Yjg1YjhlNDljYzM4YjcwNTVlNjY1YQ==
+  data.tar.gz: !binary |-
+    YzdjNDY5OTkzNWIwODQ3Zjk0YmZkZjlmNmM4Y2RmNmI1MjJkNGEwNw==
+!binary "U0hBNTEy":
+  metadata.gz: !binary |-
+    OGJhMGRiMTE3NjRkOWYxMWRhOGY1OTRmODdiYTRhNDQ2YTFlZTNkZTM2ZDlj
+    MTM1YjhlNjU5ODM4MDc1NDIyY2YzMTkzMzA2NDU2MjA5NzgzMmEwMDVkODhl
+    ODcwZDA4YjFjZmViNTU2ZWQzN2FiMThjZjYyN2RjNjY2OWYyM2M=
+  data.tar.gz: !binary |-
+    YTkwOWI1NDY4MjdkOGNkY2FjN2IxMjc1MTRkYzQ5NTkyZmFiODEwZTBhMjc0
+    NTc3NDc2MzhjODdhZWNhM2ExOWVmMWQyMzgzNmUyNWYzNTBjOTVmYzM0ZjE1
+    ZmZkNDczMTc2YmVhZmEzZTM4ODMzYzIyMTY2ZDg5NzU5MGM3Mzc=

data/.gitignore

@@ -1,3 +1,4 @@
 *~
 *.gem
 Gemfile.lock
+.rbx/*

data/.travis.yml

@@ -2,11 +2,18 @@ rvm:
   - 1.8.7
   - 1.9.2
   - 1.9.3
+  - ruby-head
   - ree
   - rbx-18mode
   - rbx-19mode
-  - jruby
+  - jruby-18mode
+  - jruby-19mode
+  - jruby-head
 
 branches:
   only:
     - master
+
+before_install:
+  - gem install sinatra
+  - gem install random-word

data/CHANGELOG.md

@@ -1,6 +1,46 @@
 Pry Theme changelog
 ===================
 
+### v0.2.0 (March 26, 2013)
+
+* **HOT**: Added Windows support
+* **NOT SO HOT**: The plugin was rewritten from scratch
+* The plugin works everywhere where you can launch Pry
+* Improved `vim-detailed` theme
+* Added support for 16 colour themes
+* Introduced the new theme syntax
+* Lots of rewordings, improvements of help messages
+* Added fallback mode. It is useful when you are running Pry on poor terminals
+  and trying to use a 256 colour theme. It is quite numpty, though.
+* Converted switches to subcommands
+* Added basic tab completion for installed themes
+* Added support for italic font. Does not work eveywhere. For example, I use
+  urxvt and it does support italic fonts.
+* **NOT BAD**: Added a bunch of new themes
+
+    * pry-monochrome
+    * pry-modern-256 (old `pry-modern`)
+    * pry-classic-256 (old `pry-classic`; default theme on 256 colour capable
+      terminals)
+
+    Including Windows friendly themes:
+
+    * pry-classic-16 (default theme on Windows)
+    * pry-classic-8
+    * pry-zealand-16 (greenish)
+    * pry-zealand-8
+    * pry-love-16 (redish)
+    * pry-love-8
+    * pry-sibera-16 (bluish)
+    * pry-sibera-8
+    * pry-tepid-16 (yellowish)
+    * pry-tepid-8
+    * pry-modern-16
+    * pry-modern-8
+* And probably something else. I could forget something!
+
+And do not forget to check out [the new CLI][cli]!
+
 ### v0.1.3 (September 21, 2012)
 
 * Improved integration with [pry-rescue][prescue] plugin.

data/Gemfile

@@ -1,2 +1,2 @@
-source :rubygems
+source 'http://rubygems.org'
 gemspec

data/README.md

@@ -1,18 +1,20 @@
 ![Pry Theme][logo]
 
+![Pry Theme version badge][ver-badge] [![Build Status][ci-badge]][ci-link]
+
 * Repository: [https://github.com/kyrylo/pry-theme/][pt]
 * Wiki: [https://github.com/kyrylo/pry-theme/wiki][wiki]
 
 Description
 -----------
 
-Pry Theme is a plugin for [Pry][pry], which helps you to customize your Pry
-colors via `prytheme` files.
+Pry Theme is a plugin for [Pry][pry], which helps you to customise your Pry
+colors via `prytheme.rb` files.
 
-![Railscasts](/kyrylo/pry-theme/raw/master/screenshots/railscasts.png)
-![Solarized](/kyrylo/pry-theme/raw/master/screenshots/solarized.png)
-![Tomorrow](/kyrylo/pry-theme/raw/master/screenshots/tomorrow.png)
-![Zenburn](/kyrylo/pry-theme/raw/master/screenshots/zenburn.png)
+![Railscasts](./screenshots/railscasts.png)
+![Solarized](./screenshots/solarized.png)
+![Tomorrow](./screenshots/tomorrow.png)
+![Zenburn](./screenshots/zenburn.png)
 
 Installation
 ------------
@@ -27,14 +29,14 @@ Synopsis
 
 ### Theme files
 
-Theme file is a valid YAML file, which has `.prytheme` extension (for example,
-`beautiful.prytheme`). In order to set up the desired theme, add the following
-line into your `.pryrc`:
+Theme file is nothing but a Ruby file, which has `.prytheme.rb` extension (for
+example, `beautiful.prytheme.rb`). In order to set up the desired theme, add the
+following line to your `.pryrc`:
 
     Pry.config.theme = "theme-name"
 
-The default theme is `pry-classic` (basically, you won't notice it, because
-it copies the default outlook of Pry, just as you didn't install anything).
+The default theme is `pry-classic` (basically, you shouldn't notice it, because
+it resembles the default outlook of Pry, as though you didn't install anything).
 Let's change it to something more neoteric:
 
     Pry.config.theme = "pry-modern"
@@ -47,60 +49,33 @@ Pry Theme has a command-line interface available via Pry. Just launch Pry and
 start working with it. For example, you can _temporary_ change themes on the
 fly (only for the current session):
 
-    [1] pry(main)> pry-theme pry-classic
+    [1] pry(main)> pry-theme try pry-classic
 
-This will switch your current theme to `pry-classic`.
+This subcommand would switch your current theme to `pry-classic` theme.
 
 You can find [more information about CLI in Pry Theme Wiki][cli].
 
-### Creating themes
+### Managing themes
 
 Creating new themes isn't hard. [Check out Pry Theme Wiki article on that][new_theme].
 
-### Adding new themes
-
-Theme files must have `.prytheme` extension. Check out [Pry Theme Collection][ptc],
+Theme files must have `.prytheme.rb` extension. Check out [Pry Theme Collection][ptc]
 if you want to find some themes other than default ones.
 
-* On GNU/Linux and Mac OS
-
-    Put your theme file in `$HOME/.pry/themes` directory.
+If you already have your theme stored somewhere on disk, just put it in the
+`$HOME/.pry/themes` directory.
 
 If you don't want to bother with routine operations, you can install a theme
-from the Collection with help of `pry-theme -i <name>` command. For example, you
-can install tomorrow-night theme: `pry-theme -i tomorrow-night`.
+from the Collection with help of `pry-theme install <name>` subcommand. For
+example, you can want to install xoria256 theme. Just execute
+`pry-theme install xoria256` and you're done.
 
 Oh, and don't forget to adjust your `.pryrc`!
 
 Limitations
 -----------
 
-Basically, it will run on any terminal that is capable of displaying 256 colors,
-but with a couple of admonishments. They are listed below.
-
-### OS support
-
-* GNU/Linux;
-* Mac OS.
-
-I hope it runs on Windows too, but I couldn't find any sane terminal, that
-would support 256 colors. Sorry, Windows guys. Please, file an issue, if you
-noticed bugs or something.
-
-### Ruby implementations support
-
-* MRI 1.9.3
-* MRI 1.9.2
-* MRI 1.8.7
-* REE 1.8.7-2012.02
-* JRuby 1.6.7
-* Rubinius 1.2.4
-
-Under the hood
---------------
-
-Basically, Pry Theme is nothing but a CodeRay color scheme with a human-readable
-syntax.
+No limitations. Pry Theme will run everywhere where you can launch Pry.
 
 Credits
 -------
@@ -118,6 +93,9 @@ License
 The project uses Zlib License. See LICENSE file for more information.
 
 [pt]: https://github.com/kyrylo/pry-theme/ "Home page"
+[ver-badge]: https://badge.fury.io/rb/pry-theme.png "Pry Theme version badge"
+[ci-badge]: https://travis-ci.org/kyrylo/pry-theme.png?branch=master "Build status"
+[ci-link]: https://travis-ci.org/kyrylo/pry-theme/ "Build history"
 [logo]: http://img-fotki.yandex.ru/get/5107/98991937.a/0_7c6c8_871a1842_orig "Pry Theme"
 [pry]: https://github.com/pry/pry/ "Pry's home page"
 [new_theme]: https://github.com/kyrylo/pry-theme/wiki/Creating-a-New-Theme

data/Rakefile

@@ -1,6 +1,15 @@
+def quiet
+  ENV['VERBOSE'] ? '' : '-q'
+end
+
+def test_files
+  paths = FileList['spec/**/*_spec.rb']
+  paths.shuffle!.join(' ')
+end
+
 desc "Run tests"
 task :test do
-  sh "bacon -Itest --automatic --quiet"
+  exec "bacon -Ispec #{ quiet } #{ test_files }"
 end
 
 task :default => :test

data/VERSION

@@ -0,0 +1 @@
+0.2.0

data/lib/pry-theme/basic_editor.rb

@@ -0,0 +1,116 @@
+require 'etc'
+
+module PryTheme
+  class BasicEditor
+
+    class << self
+      def edit(theme_name)
+        editor = new(theme_name)
+        editor.start_editing
+      end
+    end
+
+    attr_reader :current_file, :output
+
+    def initialize(filename)
+      @filename = filename
+      theme_path = themify(filename)
+
+      @editor = Pry.config.editor
+      @new_theme = false
+      @output = Pry.output
+      @current_file = File.open(theme_path, 'r+')
+    rescue Errno::ENOENT
+      @new_theme = true
+      @current_file = File.open(theme_path, 'w')
+    end
+
+    def start_editing
+      if @new_theme
+        @output.puts 'Created a new theme.'
+        @current_file.puts template
+        @current_file.close
+      end
+      @output.puts "Opened in #{ @editor }: #{ themify(@filename) }"
+
+      reload_theme!
+      output_dashy_header("Current \"#@filename\"")
+
+      Pry::Editor.invoke_editor(@current_file.path, 1)
+
+      reload_theme!
+      output_dashy_header("Edited \"#@filename\"")
+    end
+
+    private
+
+    def reload_theme!
+      ThemeList.reload_theme(@filename, @current_file)
+    end
+
+    def output_dashy_header(msg)
+      preview = Preview.new(ThemeList.themes.find { |t| t.name == @filename })
+      Pry::Pager.page(preview.banner(msg) + preview.long)
+    end
+
+    def themify(filename)
+      File.join(USER_THEMES_DIR, filename + PT_EXT)
+    end
+
+    def template
+      Pry::Helpers::CommandHelpers.unindent(<<-TEMPLATE)
+        t = PryTheme.create :name => '#{ @filename }' do
+          author :name => '#{ Etc.getlogin || 'me' }', :email => 'user@hostname'
+          description '#{ @filename } theme'
+
+          # How the flip do I edit this?!
+          # Help is there: https://github.com/kyrylo/pry-theme/wiki/Creating-a-New-Theme
+          define_theme do
+            class_
+            class_variable
+            comment
+            constant
+            error
+            float
+            global_variable
+            inline_delimiter
+            instance_variable
+            integer
+            keyword
+            method
+            predefined_constant
+            symbol
+
+            regexp do
+              self_
+              char
+              content
+              delimiter
+              modifier
+              escape
+            end
+
+            shell do
+              self_
+              char
+              content
+              delimiter
+              escape
+            end
+
+            string do
+              self_
+              char
+              content
+              delimiter
+              escape
+            end
+          end
+        end
+
+        PryTheme::ThemeList.add_theme(t)
+      TEMPLATE
+    end
+
+  end
+end