opener-polarity-tagger 2.1.3 → 2.2.0

checksums.yaml

@@ -1,7 +1,7 @@
 ---
 SHA1:
-  metadata.gz: 5806b5da96e82286d0132e95e448877d7ec43466
-  data.tar.gz: bdfaa274cf5c5b4271622f5f53d1cf78334b5035
+  metadata.gz: a41a8366638e7dcb419f2ff47267e273e02c5485
+  data.tar.gz: 5ea3c487d71544423708270222b49ef253d9371f
 SHA512:
-  metadata.gz: 5acef595d1928be9b6579b99e4e1fecca11516ec61aab4e21534bc8e9655ef257c4ecf306febb4bd96ccb1a187446cf14856161b288526976f475d9f13fc7c9d
-  data.tar.gz: cd8f33e64e819b98db91aee02b6d4ef5b666801b556fa0366b02f8c05c9aa52217904bc0594a50bc895a61af8205fcda7c2ee93a4fd6a7b923e3141552b1d2e3
+  metadata.gz: 3e74d5fdb704918ad2e255dc51ae022adef4c10551921a3b7851f0c3ae9daea5dfed95896ae95cd3660502faff5dbd5d9006c4c823bb27ac083ea6e5e14a7bc6
+  data.tar.gz: 563d7fe33c442f8062fdc6e5de4e15a73c1e8bc866563986d388d214361181a53a8263e7bb796e28447f749d286d389686b163796f364c6e96d293f1a82c1063

data/README.md

@@ -3,8 +3,7 @@ Introduction
 
 This repository contains the code for the OpeNER polarity tagger. This tool tags words in a KAF file with polarity information, which basically is:
 
-* Polarity information, which represents positive or negative facts in a certain domain. Good, cheap and clean can be positive words in a hotel domain, while
-bad, expensive and dirty could be negative ones.
+* Polarity information, which represents positive or negative facts in a certain domain. Good, cheap and clean can be positive words in a hotel domain, while bad, expensive and dirty could be negative ones.
 * Sentiment modifiers, which modify the polarity of a surrounding polarity word. For instance very or no are sentiment modifiers
 
 The polarity tagger supports the following languages:
@@ -18,11 +17,7 @@ The polarity tagger supports the following languages:
 
 ### Confused by some terminology?
 
-This software is part of a larger collection of natural language processing
-tools known as "the OpeNER project". You can find more information about the
-project at [the OpeNER portal](http://opener-project.github.io). There you can
-also find references to terms like KAF (an XML standard to represent linguistic
-annotations in texts), component, cores, scenario's and pipelines.
+This software is part of a larger collection of natural language processing tools known as "the OpeNER project". You can find more information about the project at [the OpeNER portal](http://opener-project.github.io). There you can also find references to terms like KAF (an XML standard to represent linguistic annotations in texts), component, cores, scenario's and pipelines.
 
 Quick Use Example
 -----------------
@@ -31,16 +26,13 @@ Installing the polarity-tagger can be done by executing:
 
     gem install opener-polarity-tagger
 
-The polarity tagger uses python. So it is advised to run a virtualenv before
-installing the gem.
+The polarity tagger uses python. So it is advised to run a virtualenv before installing the gem.
 
-Please bare in mind that all components in OpeNER take KAF as an input and
-output KAF by default.
+Please bare in mind that all components in OpeNER take KAF as an input and output KAF by default.
 
 ### Command line interface
 
-You should now be able to call the polarity tagger as a regular shell
-command: by its name. Once installed the gem normally sits in your path so you can call it directly from anywhere.
+You should now be able to call the polarity tagger as a regular shell command: by its name. Once installed the gem normally sits in your path so you can call it directly from anywhere.
 
 This aplication reads a text from standard input in order process it.
 
@@ -65,26 +57,20 @@ You can launch a webservice by executing:
 
     polarity-tagger-server
 
-This will launch a mini webserver with the webservice. It defaults to port 9292,
-so you can access it at <http://localhost:9292>.
+This will launch a mini webserver with the webservice. It defaults to port 9292, so you can access it at <http://localhost:9292>.
 
-To launch it on a different port provide the `-p [port-number]` option like
-this:
+To launch it on a different port provide the `-p [port-number]` option like this:
 
     polarity-tagger-server -p 1234
 
 It then launches at <http://localhost:1234>
 
-Documentation on the Webservice is provided by surfing to the urls provided
-above. For more information on how to launch a webservice run the command with
-the ```-h``` option.
+Documentation on the Webservice is provided by surfing to the urls provided above. For more information on how to launch a webservice run the command with the ```-h``` option.
 
 
 ### Daemon
 
-Last but not least the polarity tagger comes shipped with a daemon that
-can read jobs (and write) jobs to and from Amazon SQS queues. For more
-information type:
+Last but not least the polarity tagger comes shipped with a daemon that can read jobs (and write) jobs to and from Amazon SQS queues. For more information type:
 
     polarity-tagger-daemon -h
 
@@ -92,9 +78,7 @@ information type:
 Description of dependencies
 ---------------------------
 
-This component runs best if you run it in an environment suited for OpeNER
-components. You can find an installation guide and helper tools in the [OpeNER installer](https://github.com/opener-project/opener-installer) and an
-[installation guide on the Opener Website](http://opener-project.github.io/getting-started/how-to/local-installation.html)
+This component runs best if you run it in an environment suited for OpeNER components. You can find an installation guide and helper tools in the [OpeNER installer](https://github.com/opener-project/opener-installer) and an [installation guide on the Opener Website](http://opener-project.github.io/getting-started/how-to/local-installation.html)
 
 At least you need the following system setup:
 
@@ -117,8 +101,7 @@ Language Extension
 The Core
 --------
 
-The component is a fat wrapper around the actual language technology core. You
-can find the core technolies in the ```core/``` folder.
+The component is a fat wrapper around the actual language technology core. You can find the core technolies in the ``\`core/``` folder.
 
 Where to go from here
 ---------------------
@@ -129,8 +112,8 @@ Where to go from here
 Report problem/Get help
 -----------------------
 
-If you encounter problems, please email <support@opener-project.eu> or leave an
-issue in the [issue tracker](https://github.com/opener-project/polarity-tagger/issues).
+If you encounter problems, please email <support@opener-project.eu> or leave an issue in the 
+[issue tracker](https://github.com/opener-project/polarity-tagger/issues).
 
 
 Contributing

data/bin/polarity-tagger-server

@@ -1,8 +1,52 @@
 #!/usr/bin/env ruby
 
 require 'puma/cli'
+require 'optparse'
+require 'opener/core/resource_switcher'
 
-rack_config = File.expand_path('../../config.ru', __FILE__)
+# Puma sadly does not provide a system that allows us to cleanly inject custom
+# options into their CLI. At the same time Puma doesn't provide an easy system
+# of starting it *without* using the `Puma::CLI` class.
+#
+# To work around these problems we create our own parser and ignore any invalid
+# option errors it throws up. This parser is used to handle options for the
+# resource switcher.
 
-cli = Puma::CLI.new([rack_config] + ARGV)
-cli.run
+rack_config   = File.expand_path('../../config.ru', __FILE__)
+switcher      = Opener::Core::ResourceSwitcher.new
+switcher_opts = {}
+show_help     = false
+
+parser = OptionParser.new do |opts|
+  opts.banner = "Usage: #{File.basename($0)} [OPTIONS]"
+
+  opts.separator "\nOptions:\n"
+
+  # Don't abort in this block as we otherwise can't show Puma's help message.
+  opts.on('-h', '--help', 'Shows this help message') do
+    show_help = true
+
+    puts parser
+  end
+
+  switcher.bind(opts, switcher_opts)
+
+  opts.separator "\nPuma Usage:\n\n"
+end
+
+begin
+  # Parse destructively so that Puma doesn't break on our custom options.
+  parser.parse!(ARGV)
+rescue OptionParser::InvalidOption
+  # Catch errors generated by Puma options and ignore them.
+end
+
+# Trigger the Puma help message since we overwrite this option and parse
+# destructively.
+if show_help
+  ARGV << '--help'
+end
+
+switcher.install(switcher_opts)
+
+Puma::CLI.new([rack_config] + ARGV).run

data/exec/polarity-tagger.rb

@@ -1,9 +1,19 @@
 #!/usr/bin/env ruby
 
 require 'opener/daemons'
+require 'opener/core/resource_switcher'
+
 require_relative '../lib/opener/polarity_tagger'
 
-options = Opener::Daemons::OptParser.parse!(ARGV)
+switcher      = Opener::Core::ResourceSwitcher.new
+switcher_opts = {}
+
+parser = Opener::Daemons::OptParser.new do |opts|
+  switcher.bind(opts, switcher_opts)
+end
+
+options = parser.parse!(ARGV)
 daemon  = Opener::Daemons::Daemon.new(Opener::PolarityTagger, options)
 
-daemon.start
+switcher.install(switcher_opts)
+daemon.start

data/lib/opener/polarity_tagger/version.rb

@@ -1,5 +1,5 @@
 module Opener
   class PolarityTagger
-    VERSION = '2.1.3'
+    VERSION = '2.2.0'
   end # PolarityTagger
 end # Opener

data/opener-polarity-tagger.gemspec

@@ -12,7 +12,6 @@ Gem::Specification.new do |gem|
   gem.required_ruby_version = '>= 1.9.2'
 
   gem.files = Dir.glob([
-    'core/site-packages/pre_build/**/*',
     'core/*',
     'ext/**/*',
     'lib/**/*',

metadata

@@ -1,7 +1,7 @@
 --- !ruby/object:Gem::Specification
 name: opener-polarity-tagger
 version: !ruby/object:Gem::Version
-  version: 2.1.3
+  version: 2.2.0
 platform: ruby
 authors:
 - development@olery.com