obd 0.0.1 → 0.0.2

checksums.yaml

@@ -0,0 +1,7 @@
+---
+SHA1:
+  metadata.gz: 31a5d5e23dc326c83edf645288eb71aed3ae0c6d
+  data.tar.gz: 1ace47b48604381ef3f4e44e8a417983f6f44ca4
+SHA512:
+  metadata.gz: 4bef32db33dae5d3f96679a7ed4ed079a37d4fde5a5155fbef759e1c9bd642898e4646010ad76d5aefde841a16a7a0ae6f0d604e5c4ea8362e42d827678c2e87
+  data.tar.gz: 38d643c4d181a091f2074d50761e557c134f2736e39f377b8c687ab2806ab057b13e7dd614d826f3d49af5f95e819197924e91d3ceeb2e4428828c65623e2189

data/README.markdown

@@ -0,0 +1,24 @@
+Installation
+============
+~~~ text
+gem install obd
+~~~
+
+Usage
+=====
+
+Connect your OBD-II adapter and pass its device file to `OBD.connect`:
+
+~~~ ruby
+require 'obd'
+
+obd = OBD.connect '/dev/tty.obd'
+
+obd[:engine_rpm]
+=> "4367.25rpm"
+
+# Retrieve error codes
+obd.send("03")
+=> "43000545"
+~~~
+

data/lib/obd/command.rb

@@ -2,12 +2,12 @@ module OBD
   class Command
 
     def initialize
-      
+
     end
 
     def self.format_result command, result
       if is_command?(command) && result != "NO DATA"
-        pids[command.to_sym].call h(result)
+        pids[command.to_sym].call h(result), h(result).to_i(16)
       else
         result
       end
@@ -25,26 +25,33 @@ module OBD
       pids.keys.include? command.to_sym
     end
 
+    def self.pid
+      {
+        "atrv" => [:battery_voltage, lambda {|x| x.to_s}],
+        "0100" => [:pids_supported_1]
+      }
+    end
+
     def self.pids
-      { 
-        pids_supported_1:                      lambda {|x| x.to_s(2).split('').each_with_index.map{|b,i| pids.keys[i] if b == '1'}},
-        monitor_status_since_clear:            lambda {|x| x.to_s},
-        freeze_dtc:                            lambda {|x| x.to_s},
-        fuel_system_status:                    lambda {|x| x.to_s},
-        calculated_engine_load:                lambda {|x| "%0.2f" % (x * 100.0 / 255.0) + '%'},
-        engine_coolent_temperature:            lambda {|x| "%0.2f" % (x * 1.8 - 104) + '*F'},
-        short_term_fuel_trim_bank_1:           lambda {|x| "%0.2f" % (x * 0.78125 - 100) + '%'},
-        long_term_fuel_trim_bank_1:            lambda {|x| "%0.2f" % (x * 0.78125 - 100) + '%'},
-        short_term_fuel_trim_bank_2:           lambda {|x| "%0.2f" % (x * 0.78125 - 100) + '%'},
-        long_term_fuel_trim_bank_2:            lambda {|x| "%0.2f" % (x * 0.78125 - 100) + '%'},
-        fuel_pressure:                         lambda {|x| "%0.2f" % (x * 3 * 0.145) + 'psi'},
-        intake_manifold_absolute_pressure:     lambda {|x| "%0.2f" % (x * 0.145) + 'psi'},
-        engine_rpm:                            lambda {|x| "%0.2f" % (x / 4.0) + 'rpm'},
-        vehicle_speed:                         lambda {|x| "%0.2f" % (x * 0.621371192) + 'mph'},
-        timing_advance:                        lambda {|x| "%0.2f" % (x / 2.0 - 64) + '*'},
-        intake_air_temperature:                lambda {|x| "%0.2f" % (x * 1.8 - 104) + '*F'},
-        maf_air_flow_rate:                     lambda {|x| "%0.2f" % (x / 100.0) + 'grams/sec'},
-        throttle_position:                     lambda {|x| "%0.2f" % (x * 100 / 255.0) + '%'},
+      {
+        pids_supported_1:                      lambda {|x,d| d.to_s(2).split('').each_with_index.map{|b,i| pids.keys[i] if b == '1'}},
+        monitor_status_since_clear:            lambda {|x| x},
+        freeze_dtc:                            lambda {|x| x},
+        fuel_system_status:                    lambda {|x| x},
+        calculated_engine_load:                lambda {|x,d| "%0.2f" % (d * 100.0 / 255.0) + '%'},
+        engine_coolent_temperature:            lambda {|x,d| "%0.2f" % (d * 1.8 - 104) + '*F'},
+        short_term_fuel_trim_bank_1:           lambda {|x,d| "%0.2f" % (d * 0.78125 - 100) + '%'},
+        long_term_fuel_trim_bank_1:            lambda {|x,d| "%0.2f" % (d * 0.78125 - 100) + '%'},
+        short_term_fuel_trim_bank_2:           lambda {|x,d| "%0.2f" % (d * 0.78125 - 100) + '%'},
+        long_term_fuel_trim_bank_2:            lambda {|x,d| "%0.2f" % (d * 0.78125 - 100) + '%'},
+        fuel_pressure:                         lambda {|x,d| "%0.2f" % (d * 3 * 0.145) + 'psi'},
+        intake_manifold_absolute_pressure:     lambda {|x,d| "%0.2f" % (d * 0.145) + 'psi'},
+        engine_rpm:                            lambda {|x,d| "%0.2f" % (d / 4.0) + 'rpm'},
+        vehicle_speed:                         lambda {|x,d| "%0.2f" % (d * 0.621371192) + 'mph'},
+        timing_advance:                        lambda {|x,d| "%0.2f" % (d / 2.0 - 64) + '*'},
+        intake_air_temperature:                lambda {|x,d| "%0.2f" % (d * 1.8 - 104) + '*F'},
+        maf_air_flow_rate:                     lambda {|x,d| "%0.2f" % (d / 100.0) + 'grams/sec'},
+        throttle_position:                     lambda {|x,d| "%0.2f" % (d * 100 / 255.0) + '%'},
         commanded_secondary_air_status:        lambda {|x| x}, # bit encoded
         oxygen_sensors_present:                lambda {|x| x}, # [A0..A3] == Bank 1,Sensors 1-4.[A4..A7]
         bank_1_sensor_1_oxygen_sensor_voltage: lambda {|x| x},
@@ -58,14 +65,14 @@ module OBD
         obd_standards_vehicle_conforms_to:     lambda {|x| x}, # bit encoded
         oxygen_sensors_present_2:              lambda {|x| x}, # complicated...
         aux_input_status:                      lambda {|x| (x == 1).inspect}, # Power Take Off (PTO) status is active?
-        run_time_since_engine_start:           lambda {|x| x}, # seconds
-        pids_supported_2:                      lambda {|x| x.to_s(2).split('').each_with_index.map{|b,i| pids.keys[i+33] if b == '1'}}, # bit encoded
-        distance_traveled_with_mil_on:         lambda {|x| x.to_s + 'km'}
+        run_time_since_engine_start:           lambda {|x,d| d}, # seconds
+        pids_supported_2:                      lambda {|x,d| d.to_s(2).split('').each_with_index.map{|b,i| pids.keys[i+33] if b == '1'}}, # bit encoded
+        distance_traveled_with_mil_on:         lambda {|x,d| d.to_s + 'km'}
       }
     end
 
     def self.h response
-      response[4..-1].to_i(16)
+      response[4..-1]
     end
 
 

data/lib/obd/connection.rb

@@ -13,7 +13,7 @@ module OBD
     
     def connect
       @serial_port = SerialPort.new @port, @baud # , data_bits: 8, stop_bits: 1, parity: SerialPort::NONE
-      @serial_port.read_timeout = 5000
+      @serial_port.read_timeout = 2000
       read
       send("AT E0")    # turn echo off
       send("AT L0")    # turn linefeeds off
@@ -24,6 +24,7 @@ module OBD
 
     def [] command
       OBD::Command.format_result(command, send(OBD::Command.to_hex(command)))
+      com = OBD::Command.new command
     end
     
     def send data

metadata

@@ -1,27 +1,29 @@
 --- !ruby/object:Gem::Specification
 name: obd
 version: !ruby/object:Gem::Version
-  version: 0.0.1
-  prerelease: 
+  version: 0.0.2
 platform: ruby
 authors:
 - Jeff Peterson
 autorequire: 
 bindir: bin
 cert_chain: []
-date: 2012-05-16 00:00:00.000000000Z
+date: 2014-04-17 00:00:00.000000000 Z
 dependencies:
 - !ruby/object:Gem::Dependency
   name: serialport
-  requirement: &70153807947280 !ruby/object:Gem::Requirement
-    none: false
+  requirement: !ruby/object:Gem::Requirement
     requirements:
     - - ~>
       - !ruby/object:Gem::Version
-        version: 1.0.0
+        version: '1.3'
   type: :runtime
   prerelease: false
-  version_requirements: *70153807947280
+  version_requirements: !ruby/object:Gem::Requirement
+    requirements:
+    - - ~>
+      - !ruby/object:Gem::Version
+        version: '1.3'
 description: A Ruby API that interfaces with ELM327 compatible devices over serial.
 email: jeff@petersonj.com
 executables: []
@@ -35,26 +37,25 @@ files:
 - lib/obd/response.rb
 homepage: http://petersonj.com/obd
 licenses: []
+metadata: {}
 post_install_message: 
 rdoc_options: []
 require_paths:
 - lib
 required_ruby_version: !ruby/object:Gem::Requirement
-  none: false
   requirements:
-  - - ! '>='
+  - - '>='
     - !ruby/object:Gem::Version
       version: '0'
 required_rubygems_version: !ruby/object:Gem::Requirement
-  none: false
   requirements:
-  - - ! '>='
+  - - '>='
     - !ruby/object:Gem::Version
       version: '0'
 requirements: []
 rubyforge_project: 
-rubygems_version: 1.8.13
+rubygems_version: 2.0.14
 signing_key: 
-specification_version: 3
+specification_version: 4
 summary: A Ruby OBD-II API
 test_files: []