nutcracker 0.2.4.12 → 0.3.0.12

checksums.yaml

@@ -1,15 +1,15 @@
 ---
 !binary "U0hBMQ==":
   metadata.gz: !binary |-
-    YjMwZTc4ZGQ3NmQ1MTk5YzViYTAwMDJkZWJmOWU4YWE5NTQ4MWQ1OQ==
+    ZTlkN2UzMGQyY2ZlYzFhNGViMWIwMDgwNjJjNDUwMzc3NjI2NTI4Mw==
   data.tar.gz: !binary |-
-    NjJmMWRiODY4YWRhN2I2NjdlMjk1MjBhMGRmMGVjNGNhZWRmYWY0Mg==
+    ODAyMDQ4MDdmYWI1NWRhYjc5YTIxOGYyZjA0NzRmMzBhMzZmODc1NA==
 SHA512:
   metadata.gz: !binary |-
-    YjRkNDE0MTZmMmRlNmYyNWQxYmEyNjExNmU5Y2M1ODkwZGYwYmVjMWE0NTU3
-    MTI5OGVmODRkNGU2MjY1Zjg0ZmZiYTg5ZGE1Mzg1MDczODA4OTJkMGIzYzcw
-    NjQzNzAyODczYjdhOTkwOGM3YmFkMmU3NWFmY2MxODE4ZjdkN2U=
+    NTEzZjc4NjUwMDFmM2ZkZmMyNjU5NDVjZjE5MGY3ZjEyOTc5NDM4ZGU3MGVm
+    OWU5OWY1ZTFhNjk5Zjg3YTdkYWNhNzEwMzQwNzk2MjlmODFiNzI1MjkwYTBi
+    MGY3MzVkNjk1NjNlODEzMTRmN2I3MWU3YjMzZjRmMGEwMTEzOTg=
   data.tar.gz: !binary |-
-    NDY2MWExOThjZjQxYTM0ZjBhZmMwMjI5YzI1NzViMTlkNmRiNjNhY2VlN2Ri
-    MGFmMWQ3ZGVhZDM3Mjg3MWY3ZDYwYjUwZGYzMTJiMjRjMzY3NTgzZjg5OTg1
-    MTViODBjN2JhMjJmNDFjYzUxZGNiMzNjYjU5MTJjMTZiNDViNGE=
+    OGZiZmU3NmM5NzBlYzE4YTkzMGViYzZiNjU3ZjMwNjNmMThmYmJhZTAyYTBi
+    MjQ4NWYzMTA2ZDFjNmRiMjQyOTZjYTljYjZkYjQ3NWVjOWUwNjExY2FlMzBm
+    MmY3ZDg1YzNhZjY0NGY0MmRhMjFjZjViNzYxYzE5NjU2MDhmZGE=

data/Rakefile

@@ -17,7 +17,7 @@ task :download do
     sh "mv nutcracker-#{sversion} ext/nutcracker"
     File.open("ext/nutcracker/extconf.rb",'w') do |file|
       file.puts %q{
-        raise "no support for #{RUBY_PLATFORM}" if RUBY_PLATFORM =~ /darwin|mswin|mingw/
+        #raise "no support for #{RUBY_PLATFORM}" if RUBY_PLATFORM =~ /darwin|mswin|mingw/
         system "./configure --prefix=#{File.expand_path('..',__FILE__)}"
         system 'make'
       }

data/ext/nutcracker/ChangeLog

@@ -1,3 +1,13 @@
+2013-20-12  Manju Rajashekhar  <manj@cs.stanford.edu>
+    * twemproxy: version 0.3.0 release
+      SRANDMEMBER support for the optional count argument (mkhq)
+      Handle case where server responds while the request is still being sent (jdi-tagged)
+      event ports (solaris/smartos) support
+      add timestamp when the server was ejected
+      support for set ex/px/nx/xx for redis 2.6.12 and up (ypocat)
+      kqueue (bsd) support (ferenyx)
+      fix parsing redis response to accept integer reply (charsyam)
+
 2013-23-04  Manju Rajashekhar  <manj@cs.stanford.edu>
     * twemproxy: version 0.2.4 release
       redis keys must be less than mbuf_data_size() in length (fifsky)

data/ext/nutcracker/Makefile.am

@@ -4,4 +4,6 @@ ACLOCAL_AMFLAGS = -I m4
 
 SUBDIRS = contrib src
 
+dist_man_MANS = man/nutcracker.8
+
 EXTRA_DIST = README.md NOTICE LICENSE ChangeLog conf scripts notes

data/ext/nutcracker/Makefile.in

@@ -34,11 +34,11 @@ POST_UNINSTALL = :
 build_triplet = @build@
 host_triplet = @host@
 subdir = .
-DIST_COMMON = $(am__configure_deps) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
-	$(top_srcdir)/configure ChangeLog config/config.guess \
-	config/config.sub config/depcomp config/install-sh \
-	config/ltmain.sh config/missing
+DIST_COMMON = $(am__configure_deps) $(dist_man_MANS) \
+	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(srcdir)/config.h.in $(top_srcdir)/configure ChangeLog \
+	config/config.guess config/config.sub config/depcomp \
+	config/install-sh config/ltmain.sh config/missing
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
 	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
@@ -61,6 +61,37 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
 	install-pdf-recursive install-ps-recursive install-recursive \
 	installcheck-recursive installdirs-recursive pdf-recursive \
 	ps-recursive uninstall-recursive
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+man8dir = $(mandir)/man8
+am__installdirs = "$(DESTDIR)$(man8dir)"
+NROFF = nroff
+MANS = $(dist_man_MANS)
 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
   distclean-recursive maintainer-clean-recursive
 AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
@@ -231,6 +262,7 @@ top_srcdir = @top_srcdir@
 MAINTAINERCLEANFILES = Makefile.in aclocal.m4 configure config.h.in config.h.in~ stamp-h.in
 ACLOCAL_AMFLAGS = -I m4
 SUBDIRS = contrib src
+dist_man_MANS = man/nutcracker.8
 EXTRA_DIST = README.md NOTICE LICENSE ChangeLog conf scripts notes
 all: config.h
 	$(MAKE) $(AM_MAKEFLAGS) all-recursive
@@ -294,6 +326,42 @@ clean-libtool:
 
 distclean-libtool:
 	-rm -f libtool config.lt
+install-man8: $(dist_man_MANS)
+	@$(NORMAL_INSTALL)
+	test -z "$(man8dir)" || $(MKDIR_P) "$(DESTDIR)$(man8dir)"
+	@list=''; test -n "$(man8dir)" || exit 0; \
+	{ for i in $$list; do echo "$$i"; done; \
+	l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.8[a-z]*$$/p'; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man8:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man8dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.8[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
 
 # This directory's subdirectories are mostly independent; you can cd
 # into them and run `make' without going through this Makefile.
@@ -431,6 +499,19 @@ distclean-tags:
 	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 
 distdir: $(DISTFILES)
+	@list='$(MANS)'; if test -n "$$list"; then \
+	  list=`for p in $$list; do \
+	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+	  if test -n "$$list" && \
+	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
+	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
+	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
+	    exit 1; \
+	  else :; fi; \
+	else :; fi
 	$(am__remove_distdir)
 	test -d "$(distdir)" || mkdir "$(distdir)"
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
@@ -622,9 +703,12 @@ distcleancheck: distclean
 	       exit 1; } >&2
 check-am: all-am
 check: check-recursive
-all-am: Makefile config.h
+all-am: Makefile $(MANS) config.h
 installdirs: installdirs-recursive
 installdirs-am:
+	for dir in "$(DESTDIR)$(man8dir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
 install: install-recursive
 install-exec: install-exec-recursive
 install-data: install-data-recursive
@@ -678,7 +762,7 @@ info: info-recursive
 
 info-am:
 
-install-data-am:
+install-data-am: install-man
 
 install-dvi: install-dvi-recursive
 
@@ -694,7 +778,7 @@ install-info: install-info-recursive
 
 install-info-am:
 
-install-man:
+install-man: install-man8
 
 install-pdf: install-pdf-recursive
 
@@ -724,7 +808,9 @@ ps: ps-recursive
 
 ps-am:
 
-uninstall-am:
+uninstall-am: uninstall-man
+
+uninstall-man: uninstall-man8
 
 .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
 	ctags-recursive install-am install-strip tags-recursive
@@ -739,11 +825,12 @@ uninstall-am:
 	install install-am install-data install-data-am install-dvi \
 	install-dvi-am install-exec install-exec-am install-html \
 	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	installdirs-am maintainer-clean maintainer-clean-generic \
-	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
-	ps ps-am tags tags-recursive uninstall uninstall-am
+	install-man8 install-pdf install-pdf-am install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs installdirs-am maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
+	uninstall uninstall-am uninstall-man uninstall-man8
 
 
 # Tell versions [3.59,3.63) of GNU make to not export all variables.

data/ext/nutcracker/README.md

@@ -40,6 +40,7 @@ To build nutcracker from source with _debug logs enabled_ and _assertions disabl
 + Supports multiple hashing modes including consistent hashing and distribution.
 + Can be configured to disable nodes on failures.
 + Observability through stats exposed on stats monitoring port.
++ Works with Linux, *BSD, OS X and Solaris (SmartOS)
 
 ## Help
 
@@ -77,7 +78,8 @@ nutcracker can be configured through a YAML file specified by the -c or --conf-f
  + one_at_a_time
  + md5
  + crc16
- + crc32
+ + crc32 (crc32 implementation compatible with [libmemcached](http://libmemcached.org/))
+ + crc32a (correct crc32 implementation as per the spec)
  + fnv1_64
  + fnv1a_64
  + fnv1_32
@@ -218,12 +220,27 @@ Pipelining is the reason why nutcracker ends up doing better in terms of through
 
 If you are deploying nutcracker in production, you might consider reading through the [recommendation document](notes/recommendation.md) to understand the parameters you could tune in nutcracker to run it efficiently in the production environment.
 
+## Utils
++ [nagios checks](https://github.com/wanelo/nagios-checks/blob/master/check_twemproxy)
++ [circunous](https://github.com/wanelo-chef/nad-checks/blob/master/recipes/twemproxy.rb)
++ [puppet module](https://github.com/wuakitv/puppet-twemproxy)
++ [nutcracker-web](https://github.com/kontera-technologies/nutcracker-web)
++ [munin-plugin](https://github.com/eveiga/contrib/tree/nutcracker/plugins/nutcracker)
++ [redis-twemproxy agent](https://github.com/Stono/redis-twemproxy-agent)
+
 ## Users
 + [Pinterest](http://pinterest.com/)
 + [Tumblr](https://www.tumblr.com/)
 + [Twitter](https://twitter.com/)
 + [Vine](http://vine.co/)
 + [Kiip](http://www.kiip.me/)
++ [Wuaki.tv](https://wuaki.tv/)
++ [Wanelo](http://wanelo.com/)
++ [Kontera](http://kontera.com/)
++ [Wikimedia](http://www.wikimedia.org/)
++ [Bright](http://www.bright.com/)
++ [56.com](http://www.56.com/)
++ [Snapchat](http://www.snapchat.com/)
 
 ## Issues and Support
 

data/ext/nutcracker/config.h.in

@@ -9,6 +9,9 @@
 /* Define to 1 if panic on an assert is enabled */
 #undef HAVE_ASSERT_PANIC
 
+/* Define to 1 if backtrace is supported */
+#undef HAVE_BACKTRACE
+
 /* Define to 1 if debug log is enabled */
 #undef HAVE_DEBUG_LOG
 
@@ -18,6 +21,15 @@
 /* Define to 1 if you have the `dup2' function. */
 #undef HAVE_DUP2
 
+/* Define to 1 if epoll is supported */
+#undef HAVE_EPOLL
+
+/* Define to 1 if event ports is supported */
+#undef HAVE_EVENT_PORTS
+
+/* Define to 1 if you have the <execinfo.h> header file. */
+#undef HAVE_EXECINFO_H
+
 /* Define to 1 if you have the <fcntl.h> header file. */
 #undef HAVE_FCNTL_H
 
@@ -42,6 +54,9 @@
 /* Define to 1 if you have the <inttypes.h> header file. */
 #undef HAVE_INTTYPES_H
 
+/* Define to 1 if kqueue is supported */
+#undef HAVE_KQUEUE
+
 /* Define to 1 if you have the `m' library (-lm). */
 #undef HAVE_LIBM
 
@@ -122,6 +137,9 @@
 /* Define to 1 if you have the <sys/epoll.h> header file. */
 #undef HAVE_SYS_EPOLL_H
 
+/* Define to 1 if you have the <sys/event.h> header file. */
+#undef HAVE_SYS_EVENT_H
+
 /* Define to 1 if you have the <sys/ioctl.h> header file. */
 #undef HAVE_SYS_IOCTL_H