logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/HDSL2-SHDSL-LINE-MIB.dic

@@ -0,0 +1,3955 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python HDSL2-SHDSL-LINE-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/HDSL2-SHDSL-LINE-MIB"
+
+MIB = {
+    "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+
+    "HDSL2-SHDSL-LINE-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """ADSLMIB Working Group""",
+        "contact" : 
+            """WG-email:  adslmib@ietf.org
+WG-URL:
+   http://www.ietf.org/html.charters/adslmib-charter.html
+Info:       https://www1.ietf.org/mailman/listinfo/adslmib
+Chair:      Mike Sneed
+            Sand Channel Systems
+Postal:     1210-203 Westview Ln
+            Raleigh NC 27605  USA
+Email:      sneedmike@hotmail.com
+Phone:     +1 206 600 7022
+
+Co-Chair    Bob Ray
+            PESA Switching Systems, Inc.
+
+
+
+Postal      330-A Wynn Drive
+            Huntsville, AL 35805 USA
+Phone       +1 256 726 9200 ext. 142
+
+Co-editor:  Clay Sikes
+            Zhone Technologies, Inc.
+Postal:     8545 126th Ave. N.
+            Largo, FL 33772 USA
+Email:      csikes@zhone.com
+Phone:      +1 727 530 8257
+
+Co-editor:  Bob Ray
+            PESA Switching Systems, Inc.
+Postal:     330-A Wynn Drive
+            Huntsville, AL 35805 USA
+Email:      rray@pesa.com
+Phone:      +1 256 726 9200 ext. 142
+
+Co-editor:  Rajesh Abbi
+            Alcatel USA
+Postal:     2301 Sugar Bush Road
+            Raleigh, NC 27612-3339 USA
+
+Email:      Rajesh.Abbi@alcatel.com
+Phone:      +1 919 850 6194""",
+        "description" :
+            """This MIB module defines a collection of objects for managing
+HDSL2/SHDSL lines.  An agent may reside at either end of the
+line; however, the MIB module is designed to require no
+management communication between the modems beyond that
+inherent in the low-level EOC line protocol as defined in
+ANSI T1E1.4/2000-006 (for HDSL2 lines) or in ITU G.991.2
+(for SHDSL lines).
+
+Copyright (C) The Internet Society (2005).  This version of
+this MIB module is part of RFC 4319; see the RFC itself for
+full legal notices.""",
+        "revisions" : (
+            {
+                "date" : "2005-12-07 00:00",
+                "description" :
+                    """This version, published as RFC 4319.
+The following changes have been made in this version:
+  1.  Added a 3rd and 4th wire pair.
+  2.  Modified all rates such that their rates are only
+      constrained by an unsigned 32-bit value and not by
+      what today's perceived technology limitations are.
+
+
+
+
+
+  3.  Clarified that the rates from RFC 3276 include
+      payload and any applicable framing and added
+      objects for payload-only rates.
+  4.  Added an object to indicate whether the
+      tip and ring are reversed on a wire pair.
+  5.  Added an object to display the activation state
+      of a wire pair.
+  6.  Added references as necessary for clarification.
+  7.  Added display hints to textual conventions as
+      necessary.
+  8.  Updated conformance statements as necessary.
+  9.  Some changes were due to IETF requirements and
+      RFC generation tools.""",
+            },
+            {
+                "date" : "2002-05-09 00:00",
+                "description" :
+                    """Initial version, published as RFC 3276.""",
+            },
+        ),
+        "identity node" : "hdsl2ShdslMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter32"},
+        {"module" : "SNMPv2-SMI", "name" : "Unsigned32"},
+        {"module" : "SNMPv2-SMI", "name" : "Gauge32"},
+        {"module" : "SNMPv2-SMI", "name" : "NOTIFICATION-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "SNMPv2-SMI", "name" : "transmission"},
+        {"module" : "SNMPv2-TC", "name" : "RowStatus"},
+        {"module" : "SNMPv2-TC", "name" : "TEXTUAL-CONVENTION"},
+        {"module" : "IF-MIB", "name" : "ifIndex"},
+        {"module" : "PerfHist-TC-MIB", "name" : "PerfCurrentCount"},
+        {"module" : "PerfHist-TC-MIB", "name" : "PerfIntervalCount"},
+        {"module" : "SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "SNMPv2-CONF", "name" : "NOTIFICATION-GROUP"},
+    ),
+
+    "typedefs" : {
+        "Hdsl2ShdslPerfCurrDayCount" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "parent module" : {
+                "name" : "SNMPv2-SMI",
+                "type" : "Gauge32",
+            },
+            "format" : "d",
+            "description" :
+                """A gauge associated with interface performance measurements in
+a current 1-day (24 hour) measurement interval.
+
+The value of this gauge starts at zero at the beginning of an
+interval and is increased when associated events occur, until
+the end of the 1-day interval.  At that time, the value of the
+gauge is stored in the previous 1-day history interval, as
+defined in a companion object of type
+Hdsl2Shdsl1DayIntevalCount, and the current interval gauge
+is restarted at zero.
+
+In the case where the agent has no valid data available for
+this interval, the corresponding object instance is not
+available, and upon a retrieval request, a corresponding error
+message shall be returned to indicate that this instance does
+not exist.  Please note that zero is a valid value.""",
+        },
+        "Hdsl2Shdsl1DayIntervalCount" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "parent module" : {
+                "name" : "SNMPv2-SMI",
+                "type" : "Gauge32",
+            },
+            "format" : "d",
+            "description" :
+                """A counter associated with interface performance measurements
+during the most previous 1-day (24 hour) measurement interval.
+The value of this gauge is equal to the value of the current
+day gauge, as defined in a companion object of type
+Hdsl2ShdslPerfCurrDayCount, at the end of its most recent
+interval.
+
+In the case where the agent has no valid data available for
+this interval, the corresponding object instance is not
+available, and upon a retrieval request, a corresponding error
+message shall be returned to indicate that this instance does
+not exist.""",
+        },
+        "Hdsl2ShdslPerfTimeElapsed" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "86399"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "86399"
+            },
+            "format" : "d",
+            "description" :
+                """The number of seconds that have elapsed since the beginning of
+the current measurement period.  If, for some reason, such as
+an adjustment in the system's time-of-day clock or the addition
+of a leap second, the current interval exceeds the maximum
+value, the agent will return the maximum value.
+
+For 15-minute intervals, the range is limited to (0..899).
+For 24-hour intervals, the range is limited to (0..86399).""",
+        },
+        "Hdsl2ShdslPerfIntervalThreshold" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "900"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "900"
+            },
+            "format" : "d",
+            "description" :
+                """This convention defines a range of values that may be set in
+a fault threshold alarm control.  As the number of seconds in
+a 15-minute interval numbers at most 900, objects of this type
+may have a range of 0...900, where the value of 0 disables the
+alarm.""",
+        },
+        "Hdsl2ShdslUnitId" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "xtuC" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "xtuR" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "xru1" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "xru2" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "xru3" : {
+                "nodetype" : "namednumber",
+                "number" : "5"
+            },
+            "xru4" : {
+                "nodetype" : "namednumber",
+                "number" : "6"
+            },
+            "xru5" : {
+                "nodetype" : "namednumber",
+                "number" : "7"
+            },
+            "xru6" : {
+                "nodetype" : "namednumber",
+                "number" : "8"
+            },
+            "xru7" : {
+                "nodetype" : "namednumber",
+                "number" : "9"
+            },
+            "xru8" : {
+                "nodetype" : "namednumber",
+                "number" : "10"
+            },
+            "description" :
+                """This is the unique identification for all units in an
+HDSL2/SHDSL span.  It is based on the EOC unit addressing
+scheme with reference to the xtuC.""",
+        },
+        "Hdsl2ShdslUnitSide" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "networkSide" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "customerSide" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "description" :
+                """This is the referenced side of an HDSL2/SHDSL unit - Network
+or Customer side.  The side facing the Network is the Network
+side, while the side facing the Customer is the Customer side.""",
+        },
+        "Hdsl2ShdslWirePair" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "wirePair1" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "wirePair2" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "wirePair3" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "wirePair4" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "description" :
+                """This is the referenced pair of wires in an HDSL2/SHDSL segment.
+HDSL2 only supports a single pair (wirePair1 or two wire),
+SHDSL lines support an optional second pair (wirePair2 or four
+wire), and G.shdsl.bis support an optional third pair
+(wirePair3 or six wire) and an optional fourth pair
+(wirePair4 or eight wire).""",
+        },
+        "Hdsl2ShdslTransmissionModeType" : {
+            "basetype" : "Bits",
+            "status" : "current",
+            "region1" : {
+                "nodetype" : "namednumber",
+                "number" : "0"
+            },
+            "region2" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "description" :
+                """Contains the regional setting of the HDSL2/SHDSL span,
+represented as a bit-map of possible settings.  The various
+bit positions are as follows:
+
+
+
+Bit   Meaning      Description
+1     region 1     Indicates ITU-T G.991.2 Annex A.
+2     region 2     Indicates ITU-T G.991.2 Annex B.""",
+        },
+        "Hdsl2ShdslClockReferenceType" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "localClk" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "networkClk" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "dataOrNetworkClk" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "dataClk" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "description" :
+                """The various STU-C symbol clock references for the
+HDSL2/SHDSL span, represented as an enumeration.""",
+        },
+    }, # typedefs
+
+    "nodes" : {
+        "hdsl2ShdslMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48",
+            "status" : "current",
+        }, # node
+        "hdsl2ShdslNotifications" : {
+            "nodetype" : "node",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.0",
+        }, # node
+        "hdsl2ShdslMibObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1",
+        }, # node
+        "hdsl2ShdslSpanConfTable" : {
+            "nodetype" : "table",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.1",
+            "status" : "current",
+            "description" :
+                """This table supports overall configuration of HDSL2/SHDSL
+spans.  Entries in this table MUST be maintained in a
+persistent manner.""",
+        }, # table
+        "hdsl2ShdslSpanConfEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.1.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+            ],
+            "description" :
+                """An entry in the hdsl2ShdslSpanConfTable.  Each entry
+represents the complete span in a single HDSL2/SHDSL line.
+It is indexed by the ifIndex of the associated HDSL2/SHDSL
+line.""",
+        }, # row
+        "hdsl2ShdslSpanConfNumRepeaters" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "8"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "8"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "units" : "repeaters",
+            "description" :
+                """This object provisions the number of repeaters/regenerators
+in this HDSL2/SHDSL span.""",
+        }, # column
+        "hdsl2ShdslSpanConfProfile" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMP-FRAMEWORK-MIB",
+                        "type" : "SnmpAdminString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object is a pointer to a span configuration profile in
+the hdsl2ShdslSpanConfProfileTable, which applies to this
+span.  The value of this object is the index of the referenced
+profile in the hdsl2ShdslSpanConfProfileTable.  Note that span
+configuration profiles are only applicable to SHDSL lines.
+
+HDSL2 lines MUST reference the default profile, 'DEFVAL'.
+By default, this object will have the value 'DEFVAL'
+(the index of the default profile).
+
+Any attempt to set this object to a value that is not the value
+of the index for an active entry in the profile table,
+hdsl2ShdslSpanConfProfileTable, MUST be rejected.""",
+        }, # column
+        "hdsl2ShdslSpanConfAlarmProfile" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMP-FRAMEWORK-MIB",
+                        "type" : "SnmpAdminString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object is a pointer to an alarm configuration profile in
+the hdsl2ShdslEndpointAlarmConfProfileTable.  The value of
+this object is the index of the referenced profile in the
+hdsl2ShdslEndpointAlarmConfProfileTable.  The alarm
+threshold configuration in the referenced profile will be
+
+
+
+used by default for all segment endpoints in this span.
+Individual endpoints may override this profile by explicitly
+specifying some other profile in the
+hdsl2ShdslEndpointConfTable.  By default, this object will
+have the value 'DEFVAL' (the index of the default
+profile).
+
+Any attempt to set this object to a value that is not the value
+of the index for an active entry in the profile table,
+hdsl2ShdslEndpointAlarmConfProfileTable, MUST be rejected.""",
+        }, # column
+        "hdsl2ShdslSpanStatusTable" : {
+            "nodetype" : "table",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.2",
+            "status" : "current",
+            "description" :
+                """This table provides overall status information of
+HDSL2/SHDSL spans.  This table contains live data from
+equipment.  As such, it is NOT persistent.""",
+        }, # table
+        "hdsl2ShdslSpanStatusEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.2.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+            ],
+            "description" :
+                """An entry in the hdsl2ShdslSpanStatusTable.  Each entry
+represents the complete span in a single HDSL2/SHDSL line.
+It is indexed by the ifIndex of the associated HDSL2/SHDSL
+line.""",
+        }, # row
+        "hdsl2ShdslStatusNumAvailRepeaters" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "8"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "8"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Contains the actual number of repeaters/regenerators
+discovered in this HDSL2/SHDSL span.""",
+        }, # column
+        "hdsl2ShdslStatusMaxAttainableLineRate" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4294967295"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4294967295"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "bps",
+            "description" :
+                """Contains the maximum attainable line rate in this HDSL2/SHDSL
+span.  This object provides the maximum rate the line is
+capable of achieving.  This is based upon measurements made
+during line probing.  This rate includes payload (user data)
+and any applicable framing overhead.""",
+        }, # column
+        "hdsl2ShdslStatusActualLineRate" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4294967295"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4294967295"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "bps",
+            "description" :
+                """Contains the actual line rate in this HDSL2/SHDSL span.  This
+SHOULD equal ifSpeed.  This rate includes payload (user data)
+and any applicable framing overhead""",
+        }, # column
+        "hdsl2ShdslStatusTransmissionModeCurrent" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2ShdslTransmissionModeType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Contains the current Power Spectral Density (PSD) regional
+setting of the HDSL2/SHDSL span.""",
+        }, # column
+        "hdsl2ShdslStatusMaxAttainablePayloadRate" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4294967295"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4294967295"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "bps",
+            "description" :
+                """Contains the maximum attainable payload (user data)
+line rate in this HDSL2/SHDSL span.  This object provides
+the maximum rate the line is capable of achieving.  This
+is based upon measurements made during line probing.  Any
+framing overhead is not included.""",
+        }, # column
+        "hdsl2ShdslStatusActualPayloadRate" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.2.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4294967295"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4294967295"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "bps",
+            "description" :
+                """Contains the actual line rate in this HDSL2/SHDSL span.  Any
+framing overhead is not included.""",
+        }, # column
+        "hdsl2ShdslInventoryTable" : {
+            "nodetype" : "table",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.3",
+            "status" : "current",
+            "description" :
+                """This table supports retrieval of unit inventory information
+available via the EOC from units in an HDSL2/SHDSL line.
+
+Entries in this table are dynamically created during the
+line discovery process.  The life cycle for these entries
+is as follows:
+
+   - xtu discovers a device, either a far-end xtu or an xru
+   - an inventory table entry is created for the device
+   - the line goes down for whatever reason
+   - inventory table entries for unreachable devices are
+     destroyed
+
+As these entries are created/destroyed dynamically, they
+are NOT persistent.""",
+        }, # table
+        "hdsl2ShdslInventoryEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.3.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "hdsl2ShdslInvIndex",
+            ],
+            "description" :
+                """An entry in the hdsl2ShdslInventoryTable.  Each entry
+
+
+
+represents inventory information for a single unit in an
+HDSL2/SHDSL line.  It is indexed by the ifIndex of the
+HDSL2/SHDSL line and the Hdsl2ShdslUnitId of the
+associated unit.""",
+        }, # row
+        "hdsl2ShdslInvIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2ShdslUnitId"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """Each entry in this table corresponds to a physical element
+in an HDSL2/SHDSL span.  It is based on the EOC unit addressing
+scheme with reference to the xtuC.""",
+        }, # column
+        "hdsl2ShdslInvVendorID" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "8",
+                        "max" : "8"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "8",
+                        "max" : "8"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Vendor ID as reported in an Inventory Response message.""",
+            "reference" :
+                """G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
+130, Octets 25-32.""",
+        }, # column
+        "hdsl2ShdslInvVendorModelNumber" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "12",
+                        "max" : "12"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "12",
+                        "max" : "12"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Vendor model number as reported in an Inventory Response
+message.""",
+            "reference" :
+                """G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
+130, Octets 33-44.""",
+        }, # column
+        "hdsl2ShdslInvVendorSerialNumber" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.3.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "12",
+                        "max" : "12"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "12",
+                        "max" : "12"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Vendor serial number as reported in an Inventory Response
+message.""",
+            "reference" :
+                """G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
+130, Octets 45-56.""",
+        }, # column
+        "hdsl2ShdslInvVendorEOCSoftwareVersion" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.3.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Vendor EOC version as reported in a Discovery Response
+message.""",
+            "reference" :
+                """G.991.2, Section 9.5.5.7.2, Discovery response - Message ID
+129, Octet 12.""",
+        }, # column
+        "hdsl2ShdslInvStandardVersion" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.3.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Version of the HDSL2/SHDSL standard implemented, as reported
+in an Inventory Response message.""",
+            "reference" :
+                """G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
+130, Octet 2.""",
+        }, # column
+        "hdsl2ShdslInvVendorListNumber" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.3.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "3",
+                        "max" : "3"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "3",
+                        "max" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Vendor list number as reported in an Inventory Response
+message.""",
+            "reference" :
+                """G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
+130, Octets 3-5.""",
+        }, # column
+        "hdsl2ShdslInvVendorIssueNumber" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.3.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "2",
+                        "max" : "2"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "2",
+                        "max" : "2"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Vendor issue number as reported in an Inventory Response
+message.""",
+            "reference" :
+                """G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
+130, Octets 6-7.""",
+        }, # column
+        "hdsl2ShdslInvVendorSoftwareVersion" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.3.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "6",
+                        "max" : "6"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "6",
+                        "max" : "6"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Vendor software version as reported in an Inventory Response
+message.""",
+            "reference" :
+                """G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
+130, Octets 8-13.""",
+        }, # column
+        "hdsl2ShdslInvEquipmentCode" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.3.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "10",
+                        "max" : "10"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "10",
+                        "max" : "10"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Equipment code conforming to ANSI T1.213, Coded Identification
+of Equipment Entities.""",
+            "reference" :
+                """G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
+130, Octets 14-23.""",
+        }, # column
+        "hdsl2ShdslInvVendorOther" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.3.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "12",
+                        "max" : "12"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "12",
+                        "max" : "12"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Other vendor information as reported in an Inventory Response
+message.""",
+            "reference" :
+                """G.991.2, Section 9.5.5.7.4, Inventory response - Message ID
+130, Octets 57-68.""",
+        }, # column
+        "hdsl2ShdslInvTransmissionModeCapability" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.3.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2ShdslTransmissionModeType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Contains the transmission mode capability of the SHDSL unit.""",
+        }, # column
+        "hdsl2ShdslEndpointConfTable" : {
+            "nodetype" : "table",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.4",
+            "status" : "current",
+            "description" :
+                """This table supports configuration parameters for segment
+endpoints in an HDSL2/SHDSL line.  As this table is indexed
+by ifIndex, it MUST be maintained in a persistent manner.""",
+        }, # table
+        "hdsl2ShdslEndpointConfEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.4.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "hdsl2ShdslInvIndex",
+                "hdsl2ShdslEndpointSide",
+                "hdsl2ShdslEndpointWirePair",
+            ],
+            "description" :
+                """An entry in the hdsl2ShdslEndpointConfTable.  Each entry
+represents a single segment endpoint in an HDSL2/SHDSL line.
+It is indexed by the ifIndex of the HDSL2/SHDSL line, the
+UnitId of the associated unit, the side of the unit, and the
+wire pair of the associated modem.""",
+        }, # row
+        "hdsl2ShdslEndpointSide" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.4.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2ShdslUnitSide"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The side of the unit associated with this segment endpoint --
+Network/Customer side -- as per the Hdsl2ShdslUnitSide textual
+convention.""",
+        }, # column
+        "hdsl2ShdslEndpointWirePair" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.4.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2ShdslWirePair"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The wire pair of the modem associated with this segment
+endpoint as per the Hdsl2ShdslWirePair textual convention.""",
+        }, # column
+        "hdsl2ShdslEndpointAlarmConfProfile" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.4.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMP-FRAMEWORK-MIB",
+                        "type" : "SnmpAdminString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "32"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "32"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object configures the alarm threshold values to be used
+for this segment endpoint.  The values are obtained from the
+alarm configuration profile referenced by this object.  The
+value of this object is the index of the referenced profile in
+the hdsl2ShdslEndpointAlarmConfProfileTable, or NULL (a
+zero-length SnmpAdminString).  If the value is a zero-length
+SnmpAdminString, the endpoint uses the default Alarm
+Configuration Profile for the associated span as per the
+hdsl2ShdslSpanConfAlarmProfile object in the
+hdsl2ShdslSpanConfTable.  The default value of this object is
+a zero-length SnmpAdminString.
+
+Any attempt to set this object to a value that is not the value
+of the index for an active entry in the profile table,
+hdsl2ShdslEndpointAlarmConfProfileTable, MUST be rejected.""",
+        }, # column
+        "hdsl2ShdslEndpointCurrTable" : {
+            "nodetype" : "table",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5",
+            "status" : "current",
+            "description" :
+                """This table contains current status and performance information
+for segment endpoints in HDSL2/SHDSL lines.  As with other
+tables in this MIB module indexed by ifIndex, entries in this
+table MUST be maintained in a persistent manner.""",
+        }, # table
+        "hdsl2ShdslEndpointCurrEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "hdsl2ShdslInvIndex",
+                "hdsl2ShdslEndpointSide",
+                "hdsl2ShdslEndpointWirePair",
+            ],
+            "description" :
+                """An entry in the hdsl2ShdslEndpointCurrTable.  Each entry
+contains status and performance information relating to a
+single segment endpoint.  It is indexed by the ifIndex of the
+HDSL2/SHDSL line, the UnitId of the associated unit, the side
+of the unit, and the wire pair of the associated modem.""",
+        }, # row
+        "hdsl2ShdslEndpointCurrAtn" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-127",
+                        "max" : "128"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-127",
+                        "max" : "128"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "dB",
+            "description" :
+                """The current loop attenuation for this endpoint as reported in
+a Network or Customer Side Performance Status message.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2ShdslEndpointCurrSnrMgn" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-127",
+                        "max" : "128"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-127",
+                        "max" : "128"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "dB",
+            "description" :
+                """The current SNR margin for this endpoint as reported in a
+Status Response/SNR message.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2ShdslEndpointCurrStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Bits",
+                    "noDefect" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "powerBackoff" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "deviceFault" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "dcContinuityFault" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "snrMarginAlarm" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "loopAttenuationAlarm" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "loswFailureAlarm" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "configInitFailure" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                    "protocolInitFailure" : {
+                        "nodetype" : "namednumber",
+                        "number" : "8"
+                    },
+                    "noNeighborPresent" : {
+                        "nodetype" : "namednumber",
+                        "number" : "9"
+                    },
+                    "loopbackActive" : {
+                        "nodetype" : "namednumber",
+                        "number" : "10"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Contains the current state of the endpoint.  This is a
+bit-map of possible conditions.  The various bit positions
+are as follows:
+
+noDefect               There are no defects on the line.
+
+powerBackoff           Indicates enhanced Power Backoff.
+
+deviceFault            Indicates that a vendor-dependent
+                       diagnostic or self-test fault
+                       has been detected.
+
+dcContinuityFault      Indicates vendor-dependent
+                       conditions that interfere with
+                       span powering such as short and
+                       open circuits.
+
+snrMarginAlarm         Indicates that the SNR margin
+                       has dropped below the alarm threshold.
+
+loopAttenuationAlarm   Indicates that the loop attenuation
+                       exceeds the alarm threshold.
+
+loswFailureAlarm       Indicates a forward LOSW alarm.
+
+configInitFailure      Endpoint failure during initialization
+                       due to paired endpoint not able to
+                       support requested configuration.
+
+protocolInitFailure    Endpoint failure during initialization
+                       due to incompatible protocol used by
+                       the paired endpoint.
+
+noNeighborPresent      Endpoint failure during initialization
+                       due to no activation sequence detected
+                       from paired endpoint.
+
+loopbackActive         A loopback is currently active at this
+                       segment endpoint.
+
+This is intended to supplement ifOperStatus.  Note that there
+is a 1:1 relationship between the status bits defined in this
+object and the notification thresholds defined elsewhere in
+this MIB module.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2ShdslEndpointES" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Errored Seconds (ES) on this endpoint since the xU
+was last restarted.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2ShdslEndpointSES" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Severely Errored Seconds (SES) on this endpoint
+since the xU was last restarted.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2ShdslEndpointCRCanomalies" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "units" : "detected CRC Anomalies",
+            "description" :
+                """Count of CRC anomalies on this endpoint since the xU was
+last restarted.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2ShdslEndpointLOSWS" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Loss of Sync Word (LOSW) Seconds on this endpoint
+since the xU was last restarted.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2ShdslEndpointUAS" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Unavailable Seconds (UAS) on this endpoint since
+the xU was last restarted.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2ShdslEndpointCurr15MinTimeElapsed" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2ShdslPerfTimeElapsed"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Total elapsed seconds in the current 15-minute interval.""",
+        }, # column
+        "hdsl2ShdslEndpointCurr15MinES" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PerfHist-TC-MIB", "name" : "PerfCurrentCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Errored Seconds (ES) in the current 15-minute
+interval.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2ShdslEndpointCurr15MinSES" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PerfHist-TC-MIB", "name" : "PerfCurrentCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Severely Errored Seconds (SES) in the current
+15-minute interval.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2ShdslEndpointCurr15MinCRCanomalies" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PerfHist-TC-MIB", "name" : "PerfCurrentCount"},
+            },
+            "access" : "readonly",
+            "units" : "detected CRC Anomalies",
+            "description" :
+                """Count of CRC anomalies in the current 15-minute interval.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2ShdslEndpointCurr15MinLOSWS" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PerfHist-TC-MIB", "name" : "PerfCurrentCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Loss of Sync Word (LOSW) Seconds in the current
+15-minute interval.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2ShdslEndpointCurr15MinUAS" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PerfHist-TC-MIB", "name" : "PerfCurrentCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Unavailable Seconds (UAS) in the current 15-minute
+interval.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2ShdslEndpointCurr1DayTimeElapsed" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2ShdslPerfTimeElapsed"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Number of seconds that have elapsed since the beginning of
+the current 1-day interval.""",
+        }, # column
+        "hdsl2ShdslEndpointCurr1DayES" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2ShdslPerfCurrDayCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Errored Seconds (ES) during the current day as
+measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2ShdslEndpointCurr1DaySES" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1.17",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2ShdslPerfCurrDayCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Severely Errored Seconds (SES) during the current
+day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2ShdslEndpointCurr1DayCRCanomalies" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1.18",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2ShdslPerfCurrDayCount"},
+            },
+            "access" : "readonly",
+            "units" : "detected CRC Anomalies",
+            "description" :
+                """Count of CRC anomalies during the current day as measured
+by hdsl2ShdslEndpointCurr1DayTimeElapsed.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2ShdslEndpointCurr1DayLOSWS" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1.19",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2ShdslPerfCurrDayCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Loss of Sync Word (LOSW) Seconds during the current
+day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2ShdslEndpointCurr1DayUAS" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1.20",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2ShdslPerfCurrDayCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Unavailable Seconds (UAS) during the current day as
+measured by hdsl2ShdslEndpointCurr1DayTimeElapsed.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2ShdslEndpointCurrTipRingReversal" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1.21",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "normal" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "reversed" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object indicates the state of the tip/ring for the
+wire pair.""",
+        }, # column
+        "hdsl2ShdslEndpointCurrActivationState" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.5.1.22",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "preActivation" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "activation" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "data" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object indicates the activation or training state of
+the wire pair.""",
+            "reference" :
+                """ITU-T G.991.2, Section 6.2 PMD Activation Sequence""",
+        }, # column
+        "hdsl2Shdsl15MinIntervalTable" : {
+            "nodetype" : "table",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.6",
+            "status" : "current",
+            "description" :
+                """This table provides one row for each HDSL2/SHDSL endpoint
+performance data collection interval.  This table contains
+live data from equipment.  As such, it is NOT persistent.""",
+        }, # table
+        "hdsl2Shdsl15MinIntervalEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.6.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "hdsl2ShdslInvIndex",
+                "hdsl2ShdslEndpointSide",
+                "hdsl2ShdslEndpointWirePair",
+                "hdsl2Shdsl15MinIntervalNumber",
+            ],
+            "description" :
+                """An entry in the hdsl2Shdsl15MinIntervalTable.""",
+        }, # row
+        "hdsl2Shdsl15MinIntervalNumber" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.6.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "96"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "96"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """Performance Data Interval number.  Interval 1 is the most
+recent previous interval; interval 96 is 24 hours ago.
+Intervals 2..96 are optional.""",
+        }, # column
+        "hdsl2Shdsl15MinIntervalES" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.6.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PerfHist-TC-MIB", "name" : "PerfIntervalCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Errored Seconds (ES) during the interval.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2Shdsl15MinIntervalSES" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.6.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PerfHist-TC-MIB", "name" : "PerfIntervalCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Severely Errored Seconds (SES) during the interval.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2Shdsl15MinIntervalCRCanomalies" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.6.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PerfHist-TC-MIB", "name" : "PerfIntervalCount"},
+            },
+            "access" : "readonly",
+            "units" : "detected CRC Anomalies",
+            "description" :
+                """Count of CRC anomalies during the interval.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2Shdsl15MinIntervalLOSWS" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.6.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PerfHist-TC-MIB", "name" : "PerfIntervalCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Loss of Sync Word (LOSW) Seconds during the
+interval.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2Shdsl15MinIntervalUAS" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.6.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PerfHist-TC-MIB", "name" : "PerfIntervalCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Unavailable Seconds (UAS) during the interval.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2Shdsl1DayIntervalTable" : {
+            "nodetype" : "table",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.7",
+            "status" : "current",
+            "description" :
+                """This table provides one row for each HDSL2/SHDSL endpoint
+performance data collection interval.  This table contains
+live data from equipment.  As such, it is NOT persistent.""",
+        }, # table
+        "hdsl2Shdsl1DayIntervalEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.7.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "hdsl2ShdslInvIndex",
+                "hdsl2ShdslEndpointSide",
+                "hdsl2ShdslEndpointWirePair",
+                "hdsl2Shdsl1DayIntervalNumber",
+            ],
+            "description" :
+                """An entry in the hdsl2Shdsl1DayIntervalTable.""",
+        }, # row
+        "hdsl2Shdsl1DayIntervalNumber" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.7.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "30"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "30"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """History Data Interval number.  Interval 1 is the most
+recent previous day; interval 30 is 30 days ago.  Intervals
+2..30 are optional.""",
+        }, # column
+        "hdsl2Shdsl1DayIntervalMoniSecs" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.7.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2ShdslPerfTimeElapsed"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """The amount of time in the 1-day interval over which the
+performance monitoring information is actually counted.
+This value will be the same as the interval duration except
+in a situation where performance monitoring data could not
+be collected for any reason.""",
+        }, # column
+        "hdsl2Shdsl1DayIntervalES" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.7.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2Shdsl1DayIntervalCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Errored Seconds (ES) during the 1-day interval as
+measured by hdsl2Shdsl1DayIntervalMoniSecs.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2Shdsl1DayIntervalSES" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.7.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2Shdsl1DayIntervalCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Severely Errored Seconds (SES) during the 1-day
+
+
+
+interval as measured by hdsl2Shdsl1DayIntervalMoniSecs.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2Shdsl1DayIntervalCRCanomalies" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.7.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2Shdsl1DayIntervalCount"},
+            },
+            "access" : "readonly",
+            "units" : "detected CRC Anomalies",
+            "description" :
+                """Count of CRC anomalies during the 1-day interval as
+measured by hdsl2Shdsl1DayIntervalMoniSecs.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2Shdsl1DayIntervalLOSWS" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.7.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2Shdsl1DayIntervalCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Loss of Sync Word (LOSW) Seconds during the 1-day
+interval as measured by hdsl2Shdsl1DayIntervalMoniSecs.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2Shdsl1DayIntervalUAS" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.7.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2Shdsl1DayIntervalCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Unavailable Seconds (UAS) during the 1-day interval
+as measured by hdsl2Shdsl1DayIntervalMoniSecs.""",
+            "reference" :
+                """HDSL2 Section 7.5.3.7; SHDSL Section 9.5.5.7""",
+        }, # column
+        "hdsl2ShdslEndpointMaintTable" : {
+            "nodetype" : "table",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.8",
+            "status" : "current",
+            "description" :
+                """This table supports maintenance operations (e.g., loopbacks)
+to be performed on HDSL2/SHDSL segment endpoints.  This table
+contains live data from equipment.  As such, it is NOT
+
+
+
+persistent.""",
+        }, # table
+        "hdsl2ShdslEndpointMaintEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.8.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "hdsl2ShdslInvIndex",
+                "hdsl2ShdslEndpointSide",
+            ],
+            "description" :
+                """An entry in the hdsl2ShdslEndpointMaintTable.  Each entry
+corresponds to a single segment endpoint and is indexed by the
+ifIndex of the HDSL2/SHDSL line, the UnitId of the associated
+unit, and the side of the unit.""",
+        }, # row
+        "hdsl2ShdslMaintLoopbackConfig" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.8.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "noLoopback" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "normalLoopback" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "specialLoopback" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object controls configuration of loopbacks for the
+associated segment endpoint.  The status of the loopback
+is obtained via the hdsl2ShdslEndpointCurrStatus object.""",
+        }, # column
+        "hdsl2ShdslMaintTipRingReversal" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.8.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "normal" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "reversed" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object indicates the state of the tip/ring pair at the
+associated segment endpoint.""",
+        }, # column
+        "hdsl2ShdslMaintPowerBackOff" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.8.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "default" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "enhanced" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object configures the receiver at the associated
+segment endpoint to operate in default or enhanced power
+backoff mode.""",
+        }, # column
+        "hdsl2ShdslMaintSoftRestart" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.8.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "ready" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "restart" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object enables the manager to trigger a soft restart
+of the modem at the associated segment endpoint.  The
+manager may only set this object to the 'restart(2)'
+value, which initiates a restart.  The agent will perform a
+restart after approximately 5 seconds.  Following the 5 second
+period, the agent will restore the object to the 'ready(1)'
+state.""",
+        }, # column
+        "hdsl2ShdslUnitMaintTable" : {
+            "nodetype" : "table",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.9",
+            "status" : "current",
+            "description" :
+                """This table supports maintenance operations for units in a
+HDSL2/SHDSL line.  Entries in this table MUST be maintained
+in a persistent manner.""",
+        }, # table
+        "hdsl2ShdslUnitMaintEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.9.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "hdsl2ShdslInvIndex",
+            ],
+            "description" :
+                """An entry in the hdsl2ShdslUnitMaintTable.  Each entry
+corresponds to a single unit and is indexed by the
+ifIndex of the HDSL2/SHDSL line and the UnitId of the
+associated unit.""",
+        }, # row
+        "hdsl2ShdslMaintLoopbackTimeout" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.9.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4095"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4095"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "units" : "minutes",
+            "description" :
+                """This object configures the timeout value for loopbacks
+initiated at segments endpoints contained in the associated
+unit.  A value of 0 disables the timeout.""",
+        }, # column
+        "hdsl2ShdslMaintUnitPowerSource" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.9.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "local" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "span" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object indicates the DC power source being used by the
+associated unit.""",
+        }, # column
+        "hdsl2ShdslSpanConfProfileTable" : {
+            "nodetype" : "table",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.10",
+            "status" : "current",
+            "description" :
+                """This table supports definitions of span configuration
+profiles for SHDSL lines.  HDSL2 does not support these
+configuration options.  This table MUST be maintained
+in a persistent manner.""",
+        }, # table
+        "hdsl2ShdslSpanConfProfileEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.10.1",
+            "create" : "true",
+            "status" : "current",
+            "implied" : "true",
+            "linkage" : [
+                "hdsl2ShdslSpanConfProfileName",
+            ],
+            "description" :
+                """Each entry corresponds to a single span configuration
+profile.  Each profile contains a set of span configuration
+parameters.  The configuration parameters in a profile are
+applied to those lines referencing that profile (see the
+hdsl2ShdslSpanConfProfile object).  Profiles may be
+created/deleted using the row creation/deletion mechanism
+via hdsl2ShdslSpanConfProfileRowStatus.  If an active
+entry is referenced in hdsl2ShdslSpanConfProfile, the
+entry MUST remain active until all references are removed.""",
+        }, # row
+        "hdsl2ShdslSpanConfProfileName" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.10.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMP-FRAMEWORK-MIB",
+                        "type" : "SnmpAdminString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """This object is the unique index associated with this profile.
+Entries in this table are referenced via the object
+hdsl2ShdslSpanConfProfile in Hdsl2ShdslSpanConfEntry.""",
+        }, # column
+        "hdsl2ShdslSpanConfWireInterface" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.10.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "twoWire" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "fourWire" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "sixWire" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "eightWire" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "twoWire",
+            "description" :
+                """This object configures the two-wire or optional four-wire,
+six-wire, or eight-wire operation for SHDSL lines.""",
+        }, # column
+        "hdsl2ShdslSpanConfMinLineRate" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.10.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4294967295"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4294967295"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "1552000",
+            "units" : "bps",
+            "description" :
+                """This object configures the minimum transmission rate for
+the associated SHDSL Line in bits-per-second (bps) and includes
+both payload (user data) and any applicable framing overhead.
+If the minimum line rate equals the maximum line rate
+(hdsl2ShdslSpanMaxLineRate), the line rate is considered
+'fixed'.  If the minimum line rate is less than the
+maximum line rate, the line rate is considered
+'rate-adaptive'.""",
+        }, # column
+        "hdsl2ShdslSpanConfMaxLineRate" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.10.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4294967295"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4294967295"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "1552000",
+            "units" : "bps",
+            "description" :
+                """This object configures the maximum transmission rate for
+the associated SHDSL Line in bits-per-second (bps) and includes
+both payload (user data) and any applicable framing overhead.
+If the minimum line rate equals the maximum line rate
+(hdsl2ShdslSpanMaxLineRate), the line rate is considered
+'fixed'.  If the minimum line rate is less than the
+maximum line rate, the line rate is considered
+'rate-adaptive'.""",
+        }, # column
+        "hdsl2ShdslSpanConfPSD" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.10.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "symmetric" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "asymmetric" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "symmetric",
+            "description" :
+                """This object configures use of symmetric/asymmetric PSD (Power
+Spectral Density) Mask for the associated SHDSL Line.  Support
+for symmetric PSD is mandatory for all supported data rates.
+Support for asymmetric PSD is optional.""",
+        }, # column
+        "hdsl2ShdslSpanConfTransmissionMode" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.10.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2ShdslTransmissionModeType"},
+            },
+            "access" : "readwrite",
+            "default" : "(region1)",
+            "description" :
+                """This object specifies the regional setting for the SHDSL
+line.""",
+        }, # column
+        "hdsl2ShdslSpanConfRemoteEnabled" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.10.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "enabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "disabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "enabled",
+            "description" :
+                """This object enables/disables support for remote management
+of the units in an SHDSL line from the STU-R via the EOC.""",
+        }, # column
+        "hdsl2ShdslSpanConfPowerFeeding" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.10.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "noPower" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "powerFeed" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "wettingCurrent" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "noPower",
+            "description" :
+                """This object enables/disables support for optional power
+feeding in an SHDSL line.""",
+        }, # column
+        "hdsl2ShdslSpanConfCurrCondTargetMarginDown" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.10.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-10",
+                        "max" : "21"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-10",
+                        "max" : "21"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "dB",
+            "description" :
+                """This object specifies the downstream current condition target
+SNR margin for an SHDSL line.  The SNR margin is the difference
+between the desired SNR and the actual SNR.  Target SNR margin
+is the desired SNR margin for a unit.""",
+        }, # column
+        "hdsl2ShdslSpanConfWorstCaseTargetMarginDown" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.10.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-10",
+                        "max" : "21"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-10",
+                        "max" : "21"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "dB",
+            "description" :
+                """This object specifies the downstream worst-case target SNR
+margin for an SHDSL line.  The SNR margin is the difference
+between the desired SNR and the actual SNR.  Target SNR
+margin is the desired SNR margin for a unit.""",
+        }, # column
+        "hdsl2ShdslSpanConfCurrCondTargetMarginUp" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.10.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-10",
+                        "max" : "21"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-10",
+                        "max" : "21"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "dB",
+            "description" :
+                """This object specifies the upstream current-condition target
+SNR margin for an SHDSL line.  The SNR margin is the difference
+between the desired SNR and the actual SNR.  Target SNR margin
+is the desired SNR margin for a unit.""",
+        }, # column
+        "hdsl2ShdslSpanConfWorstCaseTargetMarginUp" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.10.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-10",
+                        "max" : "21"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-10",
+                        "max" : "21"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "dB",
+            "description" :
+                """This object specifies the upstream worst-case target SNR
+margin for an SHDSL line.  The SNR margin is the difference
+between the desired SNR and the actual SNR.  Target SNR margin
+is the desired SNR margin for a unit.""",
+        }, # column
+        "hdsl2ShdslSpanConfUsedTargetMargins" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.10.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Bits",
+                    "currCondDown" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "worstCaseDown" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "currCondUp" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "worstCaseUp" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "(currCondDown)",
+            "description" :
+                """Indicates whether a target SNR margin is enabled or
+disabled.  This is a bit-map of possible settings.  The
+various bit positions are as follows:
+
+currCondDown   - current-condition downstream target SNR
+                 margin enabled
+
+worstCaseDown  - worst-case downstream target SNR margin
+                 enabled
+
+currCondUp     - current-condition upstream target SNR
+                 margin enabled
+
+worstCaseUp    - worst-case upstream target SNR margin
+                 enabled.""",
+        }, # column
+        "hdsl2ShdslSpanConfReferenceClock" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.10.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2ShdslClockReferenceType"},
+            },
+            "access" : "readwrite",
+            "default" : "localClk",
+            "description" :
+                """This object configures the clock reference for the STU-C
+in an SHDSL Line.""",
+        }, # column
+        "hdsl2ShdslSpanConfLineProbeEnable" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.10.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "disable" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "enable" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "disable",
+            "description" :
+                """This object enables/disables support for Line Probe of
+the units in an SHDSL line.  When Line Probe is enabled, the
+system performs Line Probing to find the best possible
+rate.  If Line Probe is disabled, the rate adaptation phase
+is skipped to shorten set up time.""",
+        }, # column
+        "hdsl2ShdslSpanConfProfileRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.10.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object controls creation/deletion of the associated
+entry in this table per the semantics of RowStatus.  If an
+active entry is referenced in hdsl2ShdslSpanConfProfile, the
+entry MUST remain active until all references are removed.""",
+        }, # column
+        "hdsl2ShdslEndpointAlarmConfProfileTable" : {
+            "nodetype" : "table",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.11",
+            "status" : "current",
+            "description" :
+                """This table supports definitions of alarm configuration
+profiles for HDSL2/SHDSL segment endpoints.  This table
+MUST be maintained in a persistent manner.""",
+        }, # table
+        "hdsl2ShdslEndpointAlarmConfProfileEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.11.1",
+            "create" : "true",
+            "status" : "current",
+            "implied" : "true",
+            "linkage" : [
+                "hdsl2ShdslEndpointAlarmConfProfileName",
+            ],
+            "description" :
+                """Each entry corresponds to a single alarm configuration profile.
+Each profile contains a set of parameters for setting alarm
+thresholds for various performance attributes monitored at
+HDSL2/SHDSL segment endpoints.  Profiles may be created/deleted
+using the row creation/deletion mechanism via
+hdsl2ShdslEndpointAlarmConfProfileRowStatus.  If an active
+entry is referenced in either hdsl2ShdslSpanConfAlarmProfile
+or hdsl2ShdslEndpointAlarmConfProfile, the entry MUST remain
+active until all references are removed.""",
+        }, # row
+        "hdsl2ShdslEndpointAlarmConfProfileName" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.11.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMP-FRAMEWORK-MIB",
+                        "type" : "SnmpAdminString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """This object is the unique index associated with this profile.""",
+        }, # column
+        "hdsl2ShdslEndpointThreshLoopAttenuation" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.11.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-127",
+                        "max" : "128"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-127",
+                        "max" : "128"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "dB",
+            "description" :
+                """This object configures the loop attenuation alarm threshold.
+When the current value of hdsl2ShdslEndpointCurrAtn reaches
+or exceeds this threshold, an hdsl2ShdslLoopAttenCrossing
+MAY be generated.""",
+        }, # column
+        "hdsl2ShdslEndpointThreshSNRMargin" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.11.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-127",
+                        "max" : "128"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-127",
+                        "max" : "128"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "dB",
+            "description" :
+                """This object configures the SNR margin alarm threshold.
+When the current value of hdsl2ShdslEndpointCurrSnrMgn
+reaches or drops below this threshold, a
+hdsl2ShdslSNRMarginCrossing MAY be generated.""",
+        }, # column
+        "hdsl2ShdslEndpointThreshES" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.11.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2ShdslPerfIntervalThreshold"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "seconds",
+            "description" :
+                """This object configures the threshold for the number of
+Errored Seconds (ES) within any given 15-minute performance
+data collection interval.  If the value of Errored Seconds
+in a particular 15-minute collection interval reaches/
+exceeds this value, an hdsl2ShdslPerfESThresh MAY be
+generated.  At most, one notification will be sent per
+interval per endpoint.""",
+        }, # column
+        "hdsl2ShdslEndpointThreshSES" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.11.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2ShdslPerfIntervalThreshold"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "seconds",
+            "description" :
+                """This object configures the threshold for the number of
+Severely Errored Seconds (SES) within any given 15-minute
+performance data collection interval.  If the value of
+Severely Errored Seconds in a particular 15-minute collection
+interval reaches/exceeds this value, an hdsl2ShdslPerfSESThresh
+MAY be generated.  At most, one notification will be sent per
+interval per endpoint.""",
+        }, # column
+        "hdsl2ShdslEndpointThreshCRCanomalies" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.11.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "detected CRC Anomalies",
+            "description" :
+                """This object configures the threshold for the number of
+CRC anomalies within any given 15-minute performance data
+collection interval.  If the value of CRC anomalies in a
+particular 15-minute collection interval reaches/exceeds
+this value, an hdsl2ShdslPerfCRCanomaliesThresh MAY be
+generated.  At most, one notification will be sent per
+interval per endpoint.""",
+        }, # column
+        "hdsl2ShdslEndpointThreshLOSWS" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.11.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2ShdslPerfIntervalThreshold"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "seconds",
+            "description" :
+                """This object configures the threshold for the number of
+Loss of Sync Word (LOSW) Seconds within any given 15-minute
+performance data collection interval.  If the value of LOSW
+in a particular 15-minute collection interval reaches/exceeds
+this value, an hdsl2ShdslPerfLOSWSThresh MAY be generated.
+At most, one notification will be sent per interval per
+endpoint.""",
+        }, # column
+        "hdsl2ShdslEndpointThreshUAS" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.11.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HDSL2-SHDSL-LINE-MIB", "name" : "Hdsl2ShdslPerfIntervalThreshold"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "seconds",
+            "description" :
+                """This object configures the threshold for the number of
+Unavailable Seconds (UAS) within any given 15-minute
+performance data collection interval.  If the value of UAS
+in a particular 15-minute collection interval reaches/exceeds
+this value, an hdsl2ShdslPerfUASThresh MAY be generated.
+At most, one notification will be sent per interval per
+endpoint.""",
+        }, # column
+        "hdsl2ShdslEndpointAlarmConfProfileRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.1.11.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object controls creation/deletion of the associated
+entry in this table as per the semantics of RowStatus.
+If an active entry is referenced in either
+hdsl2ShdslSpanConfAlarmProfile or
+hdsl2ShdslEndpointAlarmConfProfile, the entry MUST remain
+active until all references are removed.""",
+        }, # column
+        "hdsl2ShdslConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.3",
+        }, # node
+        "hdsl2ShdslGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.3.1",
+        }, # node
+        "hdsl2ShdslCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.3.2",
+        }, # node
+    }, # nodes
+
+    "notifications" : {
+        "hdsl2ShdslLoopAttenCrossing" : {
+            "nodetype" : "notification",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.0.1",
+            "status" : "current",
+            "objects" : {
+                "hdsl2ShdslEndpointCurrAtn" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointThreshLoopAttenuation" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """This notification indicates that the loop attenuation
+threshold (as per the hdsl2ShdslEndpointThreshLoopAttenuation
+value) has been reached/exceeded for the HDSL2/SHDSL segment
+endpoint.""",
+        }, # notification
+        "hdsl2ShdslSNRMarginCrossing" : {
+            "nodetype" : "notification",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.0.2",
+            "status" : "current",
+            "objects" : {
+                "hdsl2ShdslEndpointCurrSnrMgn" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointThreshSNRMargin" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """This notification indicates that the SNR margin threshold (as
+per the hdsl2ShdslEndpointThreshSNRMargin value) has been
+reached/exceeded for the HDSL2/SHDSL segment endpoint.""",
+        }, # notification
+        "hdsl2ShdslPerfESThresh" : {
+            "nodetype" : "notification",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.0.3",
+            "status" : "current",
+            "objects" : {
+                "hdsl2ShdslEndpointCurr15MinES" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointThreshES" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """This notification indicates that the errored seconds
+threshold (as per the hdsl2ShdslEndpointThreshES value)
+has been reached/exceeded for the HDSL2/SHDSL segment
+endpoint.""",
+        }, # notification
+        "hdsl2ShdslPerfSESThresh" : {
+            "nodetype" : "notification",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.0.4",
+            "status" : "current",
+            "objects" : {
+                "hdsl2ShdslEndpointCurr15MinSES" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointThreshSES" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """This notification indicates that the severely errored seconds
+threshold (as per the hdsl2ShdslEndpointThreshSES value) has
+been reached/exceeded for the HDSL2/SHDSL segment endpoint.""",
+        }, # notification
+        "hdsl2ShdslPerfCRCanomaliesThresh" : {
+            "nodetype" : "notification",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.0.5",
+            "status" : "current",
+            "objects" : {
+                "hdsl2ShdslEndpointCurr15MinCRCanomalies" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointThreshCRCanomalies" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """This notification indicates that the CRC anomalies threshold
+(as per the hdsl2ShdslEndpointThreshCRCanomalies value) has
+been reached/exceeded for the HDSL2/SHDSL segment endpoint.""",
+        }, # notification
+        "hdsl2ShdslPerfLOSWSThresh" : {
+            "nodetype" : "notification",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.0.6",
+            "status" : "current",
+            "objects" : {
+                "hdsl2ShdslEndpointCurr15MinLOSWS" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointThreshLOSWS" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """This notification indicates that the LOSW Seconds threshold
+(as per the hdsl2ShdslEndpointThreshLOSWS value) has been
+reached/exceeded for the HDSL2/SHDSL segment endpoint.""",
+        }, # notification
+        "hdsl2ShdslPerfUASThresh" : {
+            "nodetype" : "notification",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.0.7",
+            "status" : "current",
+            "objects" : {
+                "hdsl2ShdslEndpointCurr15MinUAS" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointThreshUAS" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """This notification indicates that the unavailable seconds
+threshold (as per the hdsl2ShdslEndpointThreshUAS value) has
+been reached/exceeded for the HDSL2/SHDSL segment endpoint.""",
+        }, # notification
+        "hdsl2ShdslSpanInvalidNumRepeaters" : {
+            "nodetype" : "notification",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.0.8",
+            "status" : "current",
+            "objects" : {
+                "hdsl2ShdslSpanConfNumRepeaters" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """This notification indicates that a mismatch has been detected
+between the number of repeater/regenerator units configured
+for an HDSL2/SHDSL line via the hdsl2ShdslSpanConfNumRepeaters
+object and the actual number of repeater/regenerator units
+discovered via the EOC.""",
+        }, # notification
+        "hdsl2ShdslLoopbackFailure" : {
+            "nodetype" : "notification",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.0.9",
+            "status" : "current",
+            "objects" : {
+                "hdsl2ShdslMaintLoopbackConfig" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """This notification indicates that an endpoint maintenance
+loopback command failed for an HDSL2/SHDSL segment.""",
+        }, # notification
+        "hdsl2ShdslpowerBackoff" : {
+            "nodetype" : "notification",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.0.10",
+            "status" : "current",
+            "objects" : {
+                "hdsl2ShdslEndpointCurrStatus" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """This notification indicates that the bit setting for
+powerBackoff in the hdsl2ShdslEndpointCurrStatus object for
+this endpoint has changed.""",
+        }, # notification
+        "hdsl2ShdsldeviceFault" : {
+            "nodetype" : "notification",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.0.11",
+            "status" : "current",
+            "objects" : {
+                "hdsl2ShdslEndpointCurrStatus" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """This notification indicates that the bit setting for
+deviceFault in the hdsl2ShdslEndpointCurrStatus object for
+this endpoint has changed.""",
+        }, # notification
+        "hdsl2ShdsldcContinuityFault" : {
+            "nodetype" : "notification",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.0.12",
+            "status" : "current",
+            "objects" : {
+                "hdsl2ShdslEndpointCurrStatus" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """This notification indicates that the bit setting for
+dcContinuityFault in the hdsl2ShdslEndpointCurrStatus object
+for this endpoint has changed.""",
+        }, # notification
+        "hdsl2ShdslconfigInitFailure" : {
+            "nodetype" : "notification",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.0.13",
+            "status" : "current",
+            "objects" : {
+                "hdsl2ShdslEndpointCurrStatus" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """This notification indicates that the bit setting for
+configInitFailure in the hdsl2ShdslEndpointCurrStatus object
+for this endpoint has changed.""",
+        }, # notification
+        "hdsl2ShdslprotocolInitFailure" : {
+            "nodetype" : "notification",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.0.14",
+            "status" : "current",
+            "objects" : {
+                "hdsl2ShdslEndpointCurrStatus" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """This notification indicates that the bit setting for
+protocolInitFailure in the hdsl2ShdslEndpointCurrStatus
+object for this endpoint has changed.""",
+        }, # notification
+        "hdsl2ShdslnoNeighborPresent" : {
+            "nodetype" : "notification",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.0.15",
+            "status" : "current",
+            "objects" : {
+                "hdsl2ShdslEndpointCurrStatus" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """This notification indicates that the bit setting for
+noNeighborPresent in the hdsl2ShdslEndpointCurrStatus object
+for this endpoint has changed.""",
+        }, # notification
+        "hdsl2ShdslLocalPowerLoss" : {
+            "nodetype" : "notification",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.0.16",
+            "status" : "current",
+            "objects" : {
+                "hdsl2ShdslInvVendorID" : {
+                    "nodetype" : "object",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """This notification indicates impending unit failure due to
+loss of local power (last gasp).""",
+        }, # notification
+    }, # notifications
+
+    "groups" : {
+        "hdsl2ShdslSpanConfGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.3.1.1",
+            "status" : "current",
+            "members" : {
+                "hdsl2ShdslSpanConfNumRepeaters" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslSpanConfProfile" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslSpanConfAlarmProfile" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            }, # members
+            "description" :
+                """This group supports objects for configuring span-related
+parameters for HDSL2/SHDSL lines.""",
+        }, # group
+        "hdsl2ShdslSpanStatusGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.3.1.2",
+            "status" : "current",
+            "members" : {
+                "hdsl2ShdslStatusNumAvailRepeaters" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            }, # members
+            "description" :
+                """This group supports objects for retrieving span-related
+status for HDSL2/SHDSL lines.""",
+        }, # group
+        "hdsl2ShdslInventoryShdslGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.3.1.3",
+            "status" : "current",
+            "members" : {
+                "hdsl2ShdslInvTransmissionModeCapability" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            }, # members
+            "description" :
+                """This group supports objects for retrieving SHDSL-specific
+inventory information.""",
+        }, # group
+        "hdsl2ShdslSpanShdslStatusGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.3.1.4",
+            "status" : "current",
+            "members" : {
+                "hdsl2ShdslStatusMaxAttainableLineRate" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslStatusActualLineRate" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslStatusTransmissionModeCurrent" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            }, # members
+            "description" :
+                """This group supports objects for retrieving SHDSL-specific
+span-related status.""",
+        }, # group
+        "hdsl2ShdslInventoryGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.3.1.5",
+            "status" : "current",
+            "members" : {
+                "hdsl2ShdslInvVendorID" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslInvVendorModelNumber" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslInvVendorSerialNumber" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslInvVendorEOCSoftwareVersion" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslInvStandardVersion" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslInvVendorListNumber" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslInvVendorIssueNumber" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslInvVendorSoftwareVersion" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslInvEquipmentCode" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslInvVendorOther" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            }, # members
+            "description" :
+                """This group supports objects that provide unit inventory
+information about the units in HDSL2/SHDSL lines.""",
+        }, # group
+        "hdsl2ShdslEndpointConfGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.3.1.6",
+            "status" : "current",
+            "members" : {
+                "hdsl2ShdslEndpointCurrAtn" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            }, # members
+            "description" :
+                """This group supports objects for configuring parameters for
+segment endpoints in HDSL2/SHDSL lines.""",
+        }, # group
+        "hdsl2ShdslEndpointCurrGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.3.1.7",
+            "status" : "current",
+            "members" : {
+                "hdsl2ShdslEndpointCurrAtn" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointCurrSnrMgn" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointCurrStatus" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointES" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointSES" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointCRCanomalies" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointLOSWS" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointUAS" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointCurr15MinTimeElapsed" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointCurr15MinES" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointCurr15MinSES" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointCurr15MinCRCanomalies" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointCurr15MinLOSWS" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointCurr15MinUAS" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointCurr1DayTimeElapsed" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointCurr1DayES" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointCurr1DaySES" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointCurr1DayCRCanomalies" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointCurr1DayLOSWS" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointCurr1DayUAS" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            }, # members
+            "description" :
+                """This group supports objects that provide current status and
+performance measurements relating to segment endpoints in
+HDSL2/SHDSL lines.""",
+        }, # group
+        "hdsl2Shdsl15MinIntervalGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.3.1.8",
+            "status" : "current",
+            "members" : {
+                "hdsl2Shdsl15MinIntervalES" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2Shdsl15MinIntervalSES" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2Shdsl15MinIntervalCRCanomalies" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2Shdsl15MinIntervalLOSWS" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2Shdsl15MinIntervalUAS" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            }, # members
+            "description" :
+                """This group supports objects that maintain historic
+performance measurements relating to segment endpoints in
+HDSL2/SHDSL lines in 15-minute intervals.""",
+        }, # group
+        "hdsl2Shdsl1DayIntervalGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.3.1.9",
+            "status" : "current",
+            "members" : {
+                "hdsl2Shdsl1DayIntervalMoniSecs" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2Shdsl1DayIntervalES" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2Shdsl1DayIntervalSES" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2Shdsl1DayIntervalCRCanomalies" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2Shdsl1DayIntervalLOSWS" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2Shdsl1DayIntervalUAS" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            }, # members
+            "description" :
+                """This group supports objects that maintain historic
+performance measurements relating to segment endpoints in
+HDSL2/SHDSL lines in 1-day intervals.""",
+        }, # group
+        "hdsl2ShdslMaintenanceGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.3.1.10",
+            "status" : "current",
+            "members" : {
+                "hdsl2ShdslMaintLoopbackConfig" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslMaintTipRingReversal" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslMaintPowerBackOff" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslMaintSoftRestart" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslMaintLoopbackTimeout" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslMaintUnitPowerSource" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            }, # members
+            "description" :
+                """This group supports objects that provide support for
+maintenance actions for HDSL2/SHDSL lines.""",
+        }, # group
+        "hdsl2ShdslEndpointAlarmConfGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.3.1.11",
+            "status" : "current",
+            "members" : {
+                "hdsl2ShdslEndpointAlarmConfProfile" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointThreshLoopAttenuation" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointThreshSNRMargin" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointThreshES" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointThreshSES" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointThreshCRCanomalies" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointThreshLOSWS" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointThreshUAS" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointAlarmConfProfileRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            }, # members
+            "description" :
+                """This group supports objects that allow configuration of alarm
+thresholds for various performance parameters for HDSL2/SHDSL
+lines.""",
+        }, # group
+        "hdsl2ShdslNotificationGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.3.1.12",
+            "status" : "current",
+            "members" : {
+                "hdsl2ShdslLoopAttenCrossing" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslSNRMarginCrossing" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslPerfESThresh" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslPerfSESThresh" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslPerfCRCanomaliesThresh" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslPerfLOSWSThresh" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslPerfUASThresh" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslSpanInvalidNumRepeaters" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslLoopbackFailure" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslpowerBackoff" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdsldeviceFault" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdsldcContinuityFault" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslconfigInitFailure" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslprotocolInitFailure" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslnoNeighborPresent" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslLocalPowerLoss" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            }, # members
+            "description" :
+                """This group supports notifications of significant conditions
+associated with HDSL2/SHDSL lines.""",
+        }, # group
+        "hdsl2ShdslSpanConfProfileGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.3.1.13",
+            "status" : "current",
+            "members" : {
+                "hdsl2ShdslSpanConfWireInterface" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslSpanConfMinLineRate" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslSpanConfMaxLineRate" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslSpanConfPSD" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslSpanConfTransmissionMode" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslSpanConfRemoteEnabled" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslSpanConfPowerFeeding" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslSpanConfCurrCondTargetMarginDown" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslSpanConfWorstCaseTargetMarginDown" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslSpanConfCurrCondTargetMarginUp" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslSpanConfWorstCaseTargetMarginUp" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslSpanConfUsedTargetMargins" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslSpanConfReferenceClock" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslSpanConfLineProbeEnable" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslSpanConfProfileRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            }, # members
+            "description" :
+                """This group supports objects that constitute configuration
+profiles for configuring span-related parameters in SHDSL
+lines.""",
+        }, # group
+        "hdsl2ShdslWirePairGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.3.1.14",
+            "status" : "current",
+            "members" : {
+                "hdsl2ShdslEndpointCurrTipRingReversal" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointCurrActivationState" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            }, # members
+            "description" :
+                """This group supports objects that provide the status
+of SHDSL-specific wire pairs.""",
+        }, # group
+        "hdsl2ShdslPayloadRateGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.3.1.15",
+            "status" : "current",
+            "members" : {
+                "hdsl2ShdslStatusMaxAttainablePayloadRate" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslStatusActualPayloadRate" : {
+                    "nodetype" : "member",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+            }, # members
+            "description" :
+                """This group supports objects for retrieving payload rates
+that exclude any framing overhead.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "hdsl2ShdslLineMibCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.3.2.1",
+            "status" : "deprecated",
+            "description" :
+                """The compliance statement for SNMP entities that implement
+HDSL2 and SHDSL.  The version of SHDSL supported in this
+compliance statement is g.shdsl.
+
+**** This compliance statement is deprecated. ****""",
+            "requires" : {
+                "hdsl2ShdslSpanConfGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslSpanStatusGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslInventoryGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointConfGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointCurrGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2Shdsl15MinIntervalGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2Shdsl1DayIntervalGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslMaintenanceGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointAlarmConfGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslNotificationGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslInventoryShdslGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "HDSL2-SHDSL-LINE-MIB",
+                    "description" :
+                        """Support for this group is only required for implementations
+supporting SHDSL lines.""",
+                },
+                "hdsl2ShdslSpanShdslStatusGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "HDSL2-SHDSL-LINE-MIB",
+                    "description" :
+                        """Support for this group is only required for implementations
+supporting SHDSL lines.""",
+                },
+                "hdsl2ShdslSpanConfProfileGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "HDSL2-SHDSL-LINE-MIB",
+                    "description" :
+                        """Support for this group is only required for implementations
+supporting SHDSL lines.""",
+                },
+            }, # requires
+            "refinements" : {
+                "hdsl2ShdslSpanConfWireInterface" : {
+                    "module" : "HDSL2-SHDSL-LINE-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "twoWire" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "fourWire" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """An implementation only has to support the range as
+applicable for the original g.shdsl specification defined
+in RFC 3276.""",
+                },
+                "hdsl2ShdslStatusMaxAttainableLineRate" : {
+                    "module" : "HDSL2-SHDSL-LINE-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Unsigned32",
+                            "ranges" : [
+                            {
+                                "min" : "0",
+                                "max" : "4112000"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "0",
+                                "max" : "4112000"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """An implementation only has to support the range as
+applicable for the original g.shdsl specification defined
+in RFC 3276.""",
+                },
+                "hdsl2ShdslStatusActualLineRate" : {
+                    "module" : "HDSL2-SHDSL-LINE-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Unsigned32",
+                            "ranges" : [
+                            {
+                                "min" : "0",
+                                "max" : "4112000"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "0",
+                                "max" : "4112000"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """An implementation only has to support the range as
+applicable for the original g.shdsl specification defined
+in RFC 3276.""",
+                },
+                "hdsl2ShdslSpanConfMinLineRate" : {
+                    "module" : "HDSL2-SHDSL-LINE-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Unsigned32",
+                            "ranges" : [
+                            {
+                                "min" : "0",
+                                "max" : "4112000"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "0",
+                                "max" : "4112000"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """An implementation only has to support the range as
+applicable for the original g.shdsl specification defined
+in RFC 3276.""",
+                },
+                "hdsl2ShdslSpanConfMaxLineRate" : {
+                    "module" : "HDSL2-SHDSL-LINE-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Unsigned32",
+                            "ranges" : [
+                            {
+                                "min" : "0",
+                                "max" : "4112000"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "0",
+                                "max" : "4112000"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """An implementation only has to support the range as
+applicable for the original g.shdsl specification defined
+in RFC 3276.""",
+                },
+            }, # refinements
+
+        }, # compliance
+        "hdsl2GshdslbisLineMibCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "HDSL2-SHDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.48.3.2.2",
+            "status" : "current",
+            "description" :
+                """The compliance statement for SNMP entities that implement
+HDSL2 and SHDSL.  The version of SHDSL supported in this
+compliance statement is g.shdsl.bis.""",
+            "requires" : {
+                "hdsl2ShdslSpanConfGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslSpanStatusGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslInventoryGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointConfGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointCurrGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2Shdsl15MinIntervalGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2Shdsl1DayIntervalGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslMaintenanceGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslEndpointAlarmConfGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslNotificationGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "HDSL2-SHDSL-LINE-MIB"
+                },
+                "hdsl2ShdslInventoryShdslGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "HDSL2-SHDSL-LINE-MIB",
+                    "description" :
+                        """Support for this group is only required for implementations
+supporting SHDSL lines.""",
+                },
+                "hdsl2ShdslSpanShdslStatusGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "HDSL2-SHDSL-LINE-MIB",
+                    "description" :
+                        """Support for this group is only required for implementations
+supporting SHDSL lines.""",
+                },
+                "hdsl2ShdslSpanConfProfileGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "HDSL2-SHDSL-LINE-MIB",
+                    "description" :
+                        """Support for this group is only required for implementations
+supporting SHDSL lines.""",
+                },
+                "hdsl2ShdslWirePairGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "HDSL2-SHDSL-LINE-MIB",
+                    "description" :
+                        """Support for this group is only required for implementations
+supporting SHDSL lines.""",
+                },
+                "hdsl2ShdslPayloadRateGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "HDSL2-SHDSL-LINE-MIB",
+                    "description" :
+                        """Support for this group is only required for implementations
+supporting SHDSL lines.""",
+                },
+            }, # requires
+        }, # compliance
+    }, # compliances
+
+}