logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/Finisher-MIB.dic

@@ -0,0 +1,1416 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python Finisher-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/Finisher-MIB"
+
+MIB = {
+    "moduleName" : "Finisher-MIB",
+
+    "Finisher-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """PWG IEEE/ISTO Printer Working Group""",
+        "contact" : 
+            """Harry Lewis
+IBM
+Phone (303) 924-5337
+Email: harryl@us.ibm.com
+
+Send comments to the printmib WG using the Finisher MIB
+Project (FIN) Mailing List:  fin@pwg.org
+
+For further information, access the PWG web page under 'Finisher
+MIB':      http://www.pwg.org/
+
+Implementers of this specification are encouraged to join the
+fin mailing list in order to participate in discussions on any
+clarifications needed and registration proposals being reviewed
+in order to achieve consensus.""",
+        "description" :
+            """The MIB module for management of printers.
+Copyright (C) The Internet Society (2004). This
+version of this MIB module was published
+
+
+
+in RFC 3806. For full legal notices see the RFC itself.""",
+        "revisions" : (
+            {
+                "date" : "2004-06-02 00:00",
+                "description" :
+                    """The original version of this MIB.""",
+            },
+        ),
+        "identity node" : "finisherMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "SNMPv2-SMI", "name" : "mib-2"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "HOST-RESOURCES-MIB", "name" : "hrDeviceIndex"},
+        {"module" : "IANA-PRINTER-MIB", "name" : "PrtInputTypeTC"},
+        {"module" : "IANA-PRINTER-MIB", "name" : "PrtMarkerSuppliesTypeTC"},
+        {"module" : "Printer-MIB", "name" : "printmib"},
+        {"module" : "Printer-MIB", "name" : "PrtSubUnitStatusTC"},
+        {"module" : "Printer-MIB", "name" : "PrtLocalizedDescriptionStringTC"},
+        {"module" : "Printer-MIB", "name" : "PrtMarkerSuppliesSupplyUnitTC"},
+        {"module" : "Printer-MIB", "name" : "PrtMediaUnitTC"},
+        {"module" : "Printer-MIB", "name" : "PrtCapacityUnitTC"},
+        {"module" : "Printer-MIB", "name" : "PrtMarkerSuppliesClassTC"},
+        {"module" : "Printer-MIB", "name" : "PresentOnOff"},
+        {"module" : "Printer-MIB", "name" : "prtMIBConformance"},
+        {"module" : "IANA-FINISHER-MIB", "name" : "FinDeviceTypeTC"},
+        {"module" : "IANA-FINISHER-MIB", "name" : "FinAttributeTypeTC"},
+    ),
+
+    "nodes" : {
+        "finMIBGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.2.6",
+        }, # node
+        "finDevice" : {
+            "nodetype" : "node",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.30",
+        }, # node
+        "finDeviceTable" : {
+            "nodetype" : "table",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.30.1",
+            "status" : "current",
+            "description" :
+                """This table defines the finishing device subunits,
+including information regarding possible configuration
+options and the status for each finisher device subunit.""",
+        }, # table
+        "finDeviceEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.30.1.1",
+            "status" : "current",
+            "linkage" : [
+                "hrDeviceIndex",
+                "finDeviceIndex",
+            ],
+            "description" :
+                """There is an entry in the finishing device table for each
+possible finisher process.  Each individual finisher process is
+implemented by a finishing device represented in this table.""",
+        }, # row
+        "finDeviceIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.30.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """A unique value used to identify a finisher process.
+Although these values may change due to a major
+reconfiguration of the printer system (e.g., the addition
+of new finishing processes), the values are normally
+expected to remain stable across successive power cycles.""",
+        }, # column
+        "finDeviceType" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.30.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IANA-FINISHER-MIB", "name" : "FinDeviceTypeTC"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Defines the type of finishing process associated with this
+table row entry.""",
+        }, # column
+        "finDevicePresentOnOff" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.30.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"Printer-MIB", "name" : "PresentOnOff"},
+            },
+            "access" : "readwrite",
+            "default" : "notPresent",
+            "description" :
+                """Indicates if this finishing device subunit is available
+and whether the device subunit is enabled.""",
+        }, # column
+        "finDeviceCapacityUnit" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.30.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"Printer-MIB", "name" : "PrtCapacityUnitTC"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The unit of measure for specifying the capacity of this
+finisher device subunit.""",
+        }, # column
+        "finDeviceMaxCapacity" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.30.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-2",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-2",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "-2",
+            "description" :
+                """The maximum capacity of this finisher device subunit in
+finDeviceCapacityUnits.  If the device can reliably sense
+this value, the value is sensed by the finisher device
+
+
+and is read-only: otherwise the value may be written by a
+management or control console application.  The value (-1)
+means other and specifically indicates that the device
+places no restrictions on this parameter.  The value (-2)
+means unknown.""",
+        }, # column
+        "finDeviceCurrentCapacity" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.30.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-2",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-2",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "-2",
+            "description" :
+                """The current capacity of this finisher device subunit in
+finDeviceCapacityUnits.  If the device can reliably sense
+this value, the value is sensed by the finisher and is
+read-only: otherwise the value may be written by a
+management or control console application.  The value (-1)
+means other and specifically indicates that the device
+places no restrictions on this parameter.  The value (-2)
+means unknown.""",
+        }, # column
+        "finDeviceAssociatedMediaPaths" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.30.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "63"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "63"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Indicates the media paths which can supply media for this
+finisher device.  The value of this object is a bit map in an
+octet string with each position representing the value of a
+prtMediaPathIndex.  For a media path that can be a source
+for this finisher device subunit, the bit position equal
+to one less than the value of prtMediaPathIndex will be set.
+The bits are numbered starting with the most significant bit of
+the first byte being bit 0, the least significant bit of the
+first byte being bit 7, the most significant of the second byte
+being bit 8, and so on.""",
+        }, # column
+        "finDeviceAssociatedOutputs" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.30.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "63"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "63"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Indicates the printer output subunits this finisher device
+subunit services.  The value of this object is a bit map in an
+
+
+octet string with each position representing the value of a
+prtOutputIndex.  For an output subunit that is serviced
+by this finisher device subunit, the bit position equal
+to one less than the value of prtOutputIndex will be set.
+The bits are numbered starting with the most significant bit of
+the first byte being bit 0, the least significant bit of the
+first byte being bit 7, the most significant of the second byte
+being bit 8, and so on.""",
+        }, # column
+        "finDeviceStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.30.1.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"Printer-MIB", "name" : "PrtSubUnitStatusTC"},
+            },
+            "access" : "readonly",
+            "default" : "5",
+            "description" :
+                """Indicates the current status of this finisher device
+subunit.""",
+        }, # column
+        "finDeviceDescription" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.30.1.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"Printer-MIB", "name" : "PrtLocalizedDescriptionStringTC"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A free form text description of this device subunit in the
+localization specified by prtGeneralCurrentLocalization.""",
+        }, # column
+        "finSupply" : {
+            "nodetype" : "node",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.31",
+        }, # node
+        "finSupplyTable" : {
+            "nodetype" : "table",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.31.1",
+            "status" : "current",
+            "description" :
+                """Each unique source of supply is an entry in the finisher
+supply table. Each supply entry has its own
+characteristics associated with it such as colorant and
+
+
+current supply level.""",
+        }, # table
+        "finSupplyEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.31.1.1",
+            "status" : "current",
+            "linkage" : [
+                "hrDeviceIndex",
+                "finSupplyIndex",
+            ],
+            "description" :
+                """A list of finisher devices, with their associated
+supplies and supplies characteristics.""",
+        }, # row
+        "finSupplyIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.31.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """A unique value used by a finisher to identify this supply
+container/receptacle.  Although these values may change
+due to a major reconfiguration of the finisher (e.g., the
+addition of new supply sources to the finisher), values
+are normally expected to remain stable across successive
+power cycles.""",
+        }, # column
+        "finSupplyDeviceIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.31.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of finDeviceIndex corresponding to the finishing
+device subunit with which this finisher supply is associated.
+The value zero indicates the associated finishing device is
+Unknown.""",
+        }, # column
+        "finSupplyClass" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.31.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"Printer-MIB", "name" : "PrtMarkerSuppliesClassTC"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This value indicates whether this supply entity
+represents a supply that is consumed or a container that
+is filled.""",
+        }, # column
+        "finSupplyType" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.31.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IANA-PRINTER-MIB", "name" : "PrtMarkerSuppliesTypeTC"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The type of this supply.""",
+        }, # column
+        "finSupplyDescription" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.31.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"Printer-MIB", "name" : "PrtLocalizedDescriptionStringTC"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The description of this supply/receptacle in text useful
+for operators and management applications and in the
+localization specified by prtGeneralCurrentLocalization.""",
+        }, # column
+        "finSupplyUnit" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.31.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"Printer-MIB", "name" : "PrtMarkerSuppliesSupplyUnitTC"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Unit of measure of this finisher supply container or
+receptacle.""",
+        }, # column
+        "finSupplyMaxCapacity" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.31.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-2",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-2",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "-2",
+            "description" :
+                """The maximum capacity of this supply container/receptacle
+expressed in Supply Units.  If this supply container/
+receptacle can reliably sense this value, the value is
+sensed  and is read-only; otherwise the value may be
+written by a control panel or management application.  The
+value (-1) means other and places no restrictions on this
+
+
+
+parameter.  The value (-2) means unknown.""",
+        }, # column
+        "finSupplyCurrentLevel" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.31.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-3",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-3",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "-2",
+            "description" :
+                """The current level if this supply is a container; the
+remaining space if this supply is a receptacle. If this
+supply container/receptacle can reliably sense this value,
+the value is sensed and is read-only; otherwise the value
+may be written by a control panel or management
+application.  The value (-1) means other and places no
+restrictions on this parameter. The value (-2) means
+unknown.  A value of (-3) means that the printer knows there
+is some supply or remaining space.""",
+        }, # column
+        "finSupplyColorName" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.31.1.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "63"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "63"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The name of the color associated with this supply.""",
+            "reference" :
+                """The PWG Standardized Media Names specification [PWGMEDIA],
+section 4 Media Color Names, contains the recommended values
+
+
+
+for this object. Implementers may add additional string values.
+The naming conventions in ISO 9070 are recommended in order to
+avoid potential name clashes.""",
+        }, # column
+        "finSupplyMediaInput" : {
+            "nodetype" : "node",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.32",
+        }, # node
+        "finSupplyMediaInputTable" : {
+            "nodetype" : "table",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.32.1",
+            "status" : "current",
+            "description" :
+                """The input subunits associated with a finisher supply media
+are each represented by an entry in this table.""",
+        }, # table
+        "finSupplyMediaInputEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.32.1.1",
+            "status" : "current",
+            "linkage" : [
+                "hrDeviceIndex",
+                "finSupplyMediaInputIndex",
+            ],
+            "description" :
+                """A list of finisher supply media input subunit features and
+characteristics.""",
+        }, # row
+        "finSupplyMediaInputIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.32.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """A unique value used by a finisher to identify this supply
+media input subunit.  Although these values may change
+due to a major reconfiguration of the finisher (e.g., the
+addition of new supply media input sources to the
+finisher), values are normally expected to remain stable
+across successive power cycles.""",
+        }, # column
+        "finSupplyMediaInputDeviceIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.32.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of finDeviceIndex corresponding to the finishing
+device subunit with which this finisher media supply is
+associated.  The value zero indicates the associated device
+is unknown.""",
+        }, # column
+        "finSupplyMediaInputSupplyIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.32.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of finSupplyIndex corresponding to the finishing
+supply subunit with which this finisher media supply is
+associated.  The value zero indicates the associated finishing
+supply is unknown or there is no applicable finisher supply
+table entry.""",
+        }, # column
+        "finSupplyMediaInputType" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.32.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IANA-PRINTER-MIB", "name" : "PrtInputTypeTC"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The type of technology (discriminated primarily according
+to the feeder mechanism type) employed by the input
+subunit.""",
+        }, # column
+        "finSupplyMediaInputDimUnit" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.32.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"Printer-MIB", "name" : "PrtMediaUnitTC"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The unit of measure for specifying dimensional values for
+this input device.""",
+        }, # column
+        "finSupplyMediaInputMediaDimFeedDir" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.32.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-2",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-2",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object provides the value of the dimension in the
+feed direction of the media that is placed or will be
+placed in this input device.  Feed dimension measurements
+are taken parallel to the feed direction of the device and
+measured in finSupplyMediaInputDimUnits.  If this input
+device can reliably sense this value, the value is sensed
+and is read-only access. Otherwise the value is read-write
+access and may be written by management or control panel
+applications. The value (-1) means other and specifically
+indicates that this device places no restrictions on this
+parameter. The value (-2) indicates unknown. """,
+        }, # column
+        "finSupplyMediaInputMediaDimXFeedDir" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.32.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-2",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-2",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object provides the value of the dimension across the
+feed direction of the media that is placed or will be
+placed in this input device.  The cross feed direction is
+ninety degrees relative to the feed direction on this
+device and measured in finSupplyMediaInputDimUnits.  If
+this input device can reliably sense this value, the value
+is sensed and is read-only access. Otherwise the value is
+read-write access and may be written by management or
+control panel applications. The value (-1) means other and
+specifically indicates that this device places no
+
+
+
+restrictions on this parameter. The value (-2) indicates
+unknown. """,
+        }, # column
+        "finSupplyMediaInputStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.32.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"Printer-MIB", "name" : "PrtSubUnitStatusTC"},
+            },
+            "access" : "readonly",
+            "default" : "5",
+            "description" :
+                """This value indicates the current status of this input
+device.""",
+        }, # column
+        "finSupplyMediaInputMediaName" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.32.1.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "63"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "63"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The name of the current media contained in this input
+device. Examples are Engineering Manual Cover, Section A Tab
+Divider or any ISO standard names.""",
+        }, # column
+        "finSupplyMediaInputName" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.32.1.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "63"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "63"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The name assigned to this input subunit.""",
+        }, # column
+        "finSupplyMediaInputDescription" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.32.1.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"Printer-MIB", "name" : "PrtLocalizedDescriptionStringTC"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A free form text description of this input subunit in the
+localization specified by prtGeneralCurrentLocalization.""",
+        }, # column
+        "finSupplyMediaInputSecurity" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.32.1.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"Printer-MIB", "name" : "PresentOnOff"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Indicates if this subunit has some security associated
+with it.""",
+        }, # column
+        "finSupplyMediaInputMediaWeight" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.32.1.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The weight of the media associated with this Input device
+in grams per meter squared.  The value (-1) means other
+and specifically indicates that the device places no
+restriction on this parameter.  The value (-2) means
+unknown.  This object can be used to calculate the weight
+of individual pages processed by the document finisher.
+This value, when multiplied by the number of pages in a
+finished set, can be used to calculate the weight of a set
+before it is inserted into a mailing envelope.""",
+        }, # column
+        "finSupplyMediaInputMediaThickness" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.32.1.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-2",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-2",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object identifies the thickness of the input media
+processed by this document input subunit measured in
+micrometers.  This value may be used by devices (or
+operators) to set up proper machine tolerances for the
+feeder operation.  The value (-2) indicates that the media
+thickness is unknown or not used in the setup for this
+input subunit.""",
+        }, # column
+        "finSupplyMediaInputMediaType" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.32.1.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "63"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "63"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The name of the type of medium associated with this input
+subunit. """,
+            "reference" :
+                """The PWG Standardized Media Names specification [PWGMEDIA],
+section 3 Media Type Names, contains the recommended values
+for this object. Implementers may add additional string values.
+The naming conventions in ISO 9070 are recommended in order to
+avoid potential name clashes.""",
+        }, # column
+        "finDeviceAttribute" : {
+            "nodetype" : "node",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.33",
+        }, # node
+        "finDeviceAttributeTable" : {
+            "nodetype" : "table",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.33.1",
+            "status" : "current",
+            "description" :
+                """The attribute table defines special parameters that are
+applicable only to a minority of the finisher devices.
+An attribute table entry is used, rather than unique
+objects, to minimize the number of MIB objects and to
+allow for expansion without the addition of MIB objects.
+Each finisher device is represented by a separate row
+in the device subunit attribute table.""",
+        }, # table
+        "finDeviceAttributeEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.33.1.1",
+            "status" : "current",
+            "linkage" : [
+                "hrDeviceIndex",
+                "finDeviceIndex",
+                "finDeviceAttributeTypeIndex",
+                "finDeviceAttributeInstanceIndex",
+            ],
+            "description" :
+                """Each entry defines a finisher function parameter that
+cannot be represented by an object in the finisher
+device subunit table.""",
+        }, # row
+        "finDeviceAttributeTypeIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.33.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IANA-FINISHER-MIB", "name" : "FinAttributeTypeTC"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """Defines the attribute type represented by this row.""",
+        }, # column
+        "finDeviceAttributeInstanceIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.33.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """An index that allows the discrimination of an attribute
+instance when the same attribute occurs multiple times for
+a specific instance of a finisher function.  The value of
+this index shall be 1 if only a single instance of the
+attribute occurs for the specific finisher function.
+Additional values shall be assigned in a contiguous manner.""",
+        }, # column
+        "finDeviceAttributeValueAsInteger" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.33.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-2",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-2",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "-2",
+            "description" :
+                """Defines the integer value of the attribute.  The value of
+the attribute is represented as an integer if the
+finAttributeTypeTC description for the attribute has the
+tag 'INTEGER:'.
+
+Depending upon the attribute enum definition, this object
+may be either an integer, a counter, an index, or an enum.
+Attributes for which the concept of an integer value is
+not meaningful SHALL return a value of -1 for this
+attribute.""",
+        }, # column
+        "finDeviceAttributeValueAsOctets" : {
+            "nodetype" : "column",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.33.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "63"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "63"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """Contains the octet string value of the attribute.  The
+value of the attribute is represented as a string if the
+finAttributeTypeTC description for the attribute has the
+tag 'OCTETS:'.
+
+
+
+Depending upon the attribute enum definition, this object
+may be either a coded character set string (text) or a
+binary octet string.  Attributes for which the concept of
+an octet string value is not meaningful SHALL contain a
+zero length string.""",
+        }, # column
+        "finisherMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.111",
+            "status" : "current",
+        }, # node
+    }, # nodes
+
+    "groups" : {
+        "finDeviceGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.2.6.1",
+            "status" : "current",
+            "members" : {
+                "finDeviceType" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finDevicePresentOnOff" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finDeviceCapacityUnit" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finDeviceMaxCapacity" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finDeviceCurrentCapacity" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finDeviceAssociatedMediaPaths" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finDeviceAssociatedOutputs" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finDeviceStatus" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finDeviceDescription" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+            }, # members
+            "description" :
+                """The finisher device group.""",
+        }, # group
+        "finSupplyGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.2.6.2",
+            "status" : "current",
+            "members" : {
+                "finSupplyDeviceIndex" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finSupplyClass" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finSupplyType" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finSupplyDescription" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finSupplyUnit" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finSupplyMaxCapacity" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finSupplyCurrentLevel" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finSupplyColorName" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+            }, # members
+            "description" :
+                """The finisher supply group.""",
+        }, # group
+        "finSupplyMediaInputGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.2.6.3",
+            "status" : "current",
+            "members" : {
+                "finSupplyMediaInputDeviceIndex" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finSupplyMediaInputSupplyIndex" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finSupplyMediaInputType" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finSupplyMediaInputDimUnit" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finSupplyMediaInputMediaDimFeedDir" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finSupplyMediaInputMediaDimXFeedDir" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finSupplyMediaInputStatus" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finSupplyMediaInputMediaName" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finSupplyMediaInputName" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finSupplyMediaInputDescription" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finSupplyMediaInputSecurity" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finSupplyMediaInputMediaWeight" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finSupplyMediaInputMediaThickness" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finSupplyMediaInputMediaType" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+            }, # members
+            "description" :
+                """The finisher supply, media input group.""",
+        }, # group
+        "finDeviceAttributeGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.2.6.4",
+            "status" : "current",
+            "members" : {
+                "finDeviceAttributeValueAsInteger" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+                "finDeviceAttributeValueAsOctets" : {
+                    "nodetype" : "member",
+                    "module" : "Finisher-MIB"
+                },
+            }, # members
+            "description" :
+                """The finisher device attribute group.  This group is mandatory
+for a finisher device that contains an inserter subunit.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "finMIBCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "Finisher-MIB",
+            "oid" : "1.3.6.1.2.1.43.2.5",
+            "status" : "current",
+            "description" :
+                """The compliance statement for agents that implement the
+finisher MIB.""",
+            "requires" : {
+                "finDeviceGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "Finisher-MIB"
+                },
+                "finSupplyGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "Finisher-MIB"
+                },
+                "finDeviceAttributeGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "Finisher-MIB"
+                },
+                "finSupplyMediaInputGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "Finisher-MIB",
+                    "description" :
+                        """This group is conditionally mandatory and must be included
+if a finisher device requires a media supply that is used
+exclusively by a finishing process.""",
+                },
+            }, # requires
+            "refinements" : {
+                "finDevicePresentOnOff" : {
+                    "module" : "Finisher-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """It is conformant to implement this object as read-only.""",
+                },
+                "finDeviceMaxCapacity" : {
+                    "module" : "Finisher-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """It is conformant to implement this object as read-only.""",
+                },
+                "finDeviceCurrentCapacity" : {
+                    "module" : "Finisher-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """It is conformant to implement this object as read-only.""",
+                },
+                "finSupplyMaxCapacity" : {
+                    "module" : "Finisher-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """It is conformant to implement this object as read-only.""",
+                },
+                "finSupplyCurrentLevel" : {
+                    "module" : "Finisher-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """It is conformant to implement this object as read-only.""",
+                },
+                "finSupplyMediaInputMediaDimFeedDir" : {
+                    "module" : "Finisher-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """It is conformant to implement this object as read-only.""",
+                },
+                "finSupplyMediaInputMediaDimXFeedDir" : {
+                    "module" : "Finisher-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """It is conformant to implement this object as read-only.""",
+                },
+                "finSupplyMediaInputMediaName" : {
+                    "module" : "Finisher-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """It is conformant to implement this object as read-only.""",
+                },
+                "finSupplyMediaInputName" : {
+                    "module" : "Finisher-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """It is conformant to implement this object as read-only.""",
+                },
+                "finSupplyMediaInputSecurity" : {
+                    "module" : "Finisher-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """It is conformant to implement this object as read-only.""",
+                },
+                "finSupplyMediaInputMediaWeight" : {
+                    "module" : "Finisher-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """It is conformant to implement this object as read-only.""",
+                },
+                "finSupplyMediaInputMediaThickness" : {
+                    "module" : "Finisher-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """It is conformant to implement this object as read-only.""",
+                },
+                "finSupplyMediaInputMediaType" : {
+                    "module" : "Finisher-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """It is conformant to implement this object as read-only.""",
+                },
+                "finDeviceAttributeValueAsInteger" : {
+                    "module" : "Finisher-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """It is conformant to implement this object as read-only.""",
+                },
+                "finDeviceAttributeValueAsOctets" : {
+                    "module" : "Finisher-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """It is conformant to implement this object as read-only.""",
+                },
+            }, # refinements
+
+        }, # compliance
+    }, # compliances
+
+}