logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/FLOAT-TC-MIB.dic

@@ -0,0 +1,128 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python FLOAT-TC-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/FLOAT-TC-MIB"
+
+MIB = {
+    "moduleName" : "FLOAT-TC-MIB",
+
+    "FLOAT-TC-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF OPSAWG Working Group""",
+        "contact" : 
+            """WG Email: opsawg@ietf.org
+
+Editor: Randy Presuhn
+randy_presuhn@mindspring.com""",
+        "description" :
+            """Textual conventions for the representation
+of floating-point numbers.
+
+Copyright (c) 2011 IETF Trust and the persons
+identified as authors of the code.  All rights
+reserved.
+
+Redistribution and use in source and binary forms,
+with or without modification, is permitted pursuant
+to, and subject to the license terms contained in,
+the Simplified BSD License set forth in Section
+4.c of the IETF Trust's Legal Provisions Relating
+to IETF Documents
+(http://trustee.ietf.org/license-info).
+
+This version of this MIB module is part of RFC 6340;
+see the RFC itself for full legal notices.""",
+        "revisions" : (
+            {
+                "date" : "2011-07-27 00:00",
+                "description" :
+                    """Initial version, published as RFC 6340.""",
+            },
+        ),
+        "identity node" : "floatTcMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "mib-2"},
+        {"module" : "SNMPv2-TC", "name" : "TEXTUAL-CONVENTION"},
+    ),
+
+    "typedefs" : {
+        "Float32TC" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "4",
+                "max" : "4"
+            },
+            ],
+            "range" : {
+                "min" : "4",
+                "max" : "4"
+            },
+            "description" :
+                """This type represents a 32-bit (4-octet) IEEE
+floating-point number in binary interchange format.""",
+            "reference" :
+                """IEEE Standard for Floating-Point Arithmetic,
+Standard 754-2008""",
+        },
+        "Float64TC" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "8",
+                "max" : "8"
+            },
+            ],
+            "range" : {
+                "min" : "8",
+                "max" : "8"
+            },
+            "description" :
+                """This type represents a 64-bit (8-octet) IEEE
+floating-point number in binary interchange format.""",
+            "reference" :
+                """IEEE Standard for Floating-Point Arithmetic,
+Standard 754-2008""",
+        },
+        "Float128TC" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "16",
+                "max" : "16"
+            },
+            ],
+            "range" : {
+                "min" : "16",
+                "max" : "16"
+            },
+            "description" :
+                """This type represents a 128-bit (16-octet) IEEE
+floating-point number in binary interchange format.""",
+            "reference" :
+                """IEEE Standard for Floating-Point Arithmetic,
+Standard 754-2008""",
+        },
+    }, # typedefs
+
+    "nodes" : {
+        "floatTcMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "FLOAT-TC-MIB",
+            "oid" : "1.3.6.1.2.1.201",
+            "status" : "current",
+        }, # node
+    }, # nodes
+
+}

data/lib/mibs/ietf/FLOW-METER-MIB.dic

@@ -0,0 +1,3201 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python FLOW-METER-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/FLOW-METER-MIB"
+
+MIB = {
+    "moduleName" : "FLOW-METER-MIB",
+
+    "FLOW-METER-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF Realtime Traffic Flow Measurement Working Group""",
+        "contact" : 
+            """Nevil Brownlee, The University of Auckland
+
+Postal: Information Technology Sytems & Services
+        The University of Auckland
+        Private Bag 92-019
+        Auckland, New Zealand
+
+Phone:  +64 9 373 7599 x8941
+E-mail: n.brownlee@auckland.ac.nz""",
+        "description" :
+            """MIB for the RTFM Traffic Flow Meter.""",
+        "revisions" : (
+            {
+                "date" : "1999-10-25 00:00",
+                "description" :
+                    """Initial Version, published as RFC 2720.""",
+            },
+            {
+                "date" : "1999-08-30 12:50",
+                "description" :
+                    """UTF8OwnerString Textual Convention added, and used to
+replace OwnerString.  Conceptually the same as OwnerString,
+but facilitating internationalisation by using UTF-8
+encoding for its characters rather than US-ASCII.""",
+            },
+            {
+                "date" : "1999-08-19 10:10",
+                "description" :
+                    """Changes to SIZE specification for two variables:
+- flowRuleInfoName SIZE specified as (0..127)
+- flowRuleIndex SIZE increased to (1..2147483647)""",
+            },
+            {
+                "date" : "1997-12-23 09:37",
+                "description" :
+                    """Two further variables deprecated:
+- flowRuleInfoRulesReady (use flowRuleInfoStatus intead)
+- flowDataStatus (contains no useful information)""",
+            },
+            {
+                "date" : "1997-07-07 17:15",
+                "description" :
+                    """Significant changes since RFC 2064 include:
+- flowDataPackageTable added
+- flowColumnActivityTable deprecated
+- flowManagerCounterWrap deprecated""",
+            },
+            {
+                "date" : "1996-03-08 02:08",
+                "description" :
+                    """Initial version of this MIB (RFC 2064)""",
+            },
+        ),
+        "identity node" : "flowMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter32"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter64"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "SNMPv2-SMI", "name" : "mib-2"},
+        {"module" : "SNMPv2-TC", "name" : "TEXTUAL-CONVENTION"},
+        {"module" : "SNMPv2-TC", "name" : "RowStatus"},
+        {"module" : "SNMPv2-TC", "name" : "TimeStamp"},
+        {"module" : "SNMPv2-TC", "name" : "TruthValue"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "IF-MIB", "name" : "ifIndex"},
+        {"module" : "RMON2-MIB", "name" : "TimeFilter"},
+    ),
+
+    "typedefs" : {
+        "UTF8OwnerString" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "127"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "127"
+            },
+            "format" : "127t",
+            "description" :
+                """An administratively assigned name for the owner of a
+resource, conceptually the same as OwnerString in the RMON
+MIB [RMON-MIB].
+
+To facilitate internationalisation, this name information
+is represented using the ISO/IEC IS 10646-1 character set,
+encoded as an octet string using the UTF-8 transformation
+format described in the UTF-8 standard [UTF-8].""",
+        },
+        "PeerType" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "ipv4" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "ipv6" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "nsap" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "ipx" : {
+                "nodetype" : "namednumber",
+                "number" : "11"
+            },
+            "appletalk" : {
+                "nodetype" : "namednumber",
+                "number" : "12"
+            },
+            "decnet" : {
+                "nodetype" : "namednumber",
+                "number" : "13"
+            },
+            "description" :
+                """Indicates the type of a PeerAddress (see below).  The values
+used are from the 'Address Family Numbers' section of the
+Assigned Numbers RFC [ASG-NBR].  Peer types from other address
+families may also be used, provided only that they are
+identified by their assigned Address Family numbers.""",
+        },
+        "PeerAddress" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "3",
+                "max" : "20"
+            },
+            ],
+            "range" : {
+                "min" : "3",
+                "max" : "20"
+            },
+            "description" :
+                """Specifies the value of a peer address for various network
+protocols.  Address format depends on the actual protocol,
+as indicated below:
+
+IPv4:        ipv4(1)
+    4-octet IpAddress  (defined in the SNMPv2 SMI [RFC2578])
+
+IPv6:        ipv6(2)
+    16-octet IpAddress  (defined in the
+                            IPv6 Addressing RFC [V6-ADDR])
+
+CLNS:        nsap(3)
+    NsapAddress  (defined in the SNMPv2 SMI [RFC2578])
+
+Novell:      ipx(11)
+    4-octet Network number,
+    6-octet Host number (MAC address)
+
+AppleTalk:   appletalk(12)
+    2-octet Network number (sixteen bits),
+    1-octet Host number (eight bits)
+
+DECnet:      decnet(13)
+    1-octet Area number (in low-order six bits),
+    2-octet Host number (in low-order ten bits)""",
+        },
+        "AdjacentType" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "ip" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "nsap" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "ethernet" : {
+                "nodetype" : "namednumber",
+                "number" : "7"
+            },
+            "tokenring" : {
+                "nodetype" : "namednumber",
+                "number" : "9"
+            },
+            "ipx" : {
+                "nodetype" : "namednumber",
+                "number" : "11"
+            },
+            "appletalk" : {
+                "nodetype" : "namednumber",
+                "number" : "12"
+            },
+            "decnet" : {
+                "nodetype" : "namednumber",
+                "number" : "13"
+            },
+            "fddi" : {
+                "nodetype" : "namednumber",
+                "number" : "15"
+            },
+            "description" :
+                """Indicates the type of an adjacent address.  May be a medium
+type or (if metering is taking place inside a tunnel) a
+PeerType (see above).
+
+The values used for IEEE 802 medium types are from the 'Network
+Management Parameters (ifType definitions)' section of the
+Assigned Numbers RFC [ASG-NBR].  Other medium types may also
+be used, provided only that they are identified by their
+assigned ifType numbers.""",
+        },
+        "AdjacentAddress" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "3",
+                "max" : "20"
+            },
+            ],
+            "range" : {
+                "min" : "3",
+                "max" : "20"
+            },
+            "description" :
+                """Specifies the value of an adjacent address.  May be a Medium
+Access Control (MAC) address or (if metering is taking place
+inside a tunnel) a PeerAddress (see above).
+
+MAC Address format depends on the actual medium, as follows:
+
+Ethernet:     ethernet(7)
+    6-octet 802.3 MAC address in 'canonical' order
+Token Ring:   tokenring(9)
+    6-octet 802.5 MAC address in 'canonical' order
+
+FDDI:         fddi(15)
+    FddiMACLongAddress, i.e. a 6-octet MAC address
+    in 'canonical' order  (defined in [FDDI-MIB])""",
+        },
+        "TransportType" : {
+            "basetype" : "Integer32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "1",
+                "max" : "255"
+            },
+            ],
+            "range" : {
+                "min" : "1",
+                "max" : "255"
+            },
+            "description" :
+                """Indicates the type of a TransportAddress (see below).  Values
+will depend on the actual protocol; for IP they will be those
+given in the 'Protocol Numbers' section of the  Assigned Numbers
+RFC [ASG-NBR], including icmp(1), tcp(6) and udp(17).""",
+        },
+        "TransportAddress" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "2",
+                "max" : "2"
+            },
+            ],
+            "range" : {
+                "min" : "2",
+                "max" : "2"
+            },
+            "description" :
+                """Specifies the value of a transport address for various
+network protocols.  Format as follows:
+
+IP:
+    2-octet UDP or TCP port number
+
+Other protocols:
+    2-octet port number""",
+        },
+        "RuleAddress" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "2",
+                "max" : "20"
+            },
+            ],
+            "range" : {
+                "min" : "2",
+                "max" : "20"
+            },
+            "description" :
+                """Specifies the value of an address.  Is a superset of
+MediumAddress, PeerAddress and TransportAddress.""",
+        },
+        "FlowAttributeNumber" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "flowIndex" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "flowStatus" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "flowTimeMark" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "sourceInterface" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "sourceAdjacentType" : {
+                "nodetype" : "namednumber",
+                "number" : "5"
+            },
+            "sourceAdjacentAddress" : {
+                "nodetype" : "namednumber",
+                "number" : "6"
+            },
+            "sourceAdjacentMask" : {
+                "nodetype" : "namednumber",
+                "number" : "7"
+            },
+            "sourcePeerType" : {
+                "nodetype" : "namednumber",
+                "number" : "8"
+            },
+            "sourcePeerAddress" : {
+                "nodetype" : "namednumber",
+                "number" : "9"
+            },
+            "sourcePeerMask" : {
+                "nodetype" : "namednumber",
+                "number" : "10"
+            },
+            "sourceTransType" : {
+                "nodetype" : "namednumber",
+                "number" : "11"
+            },
+            "sourceTransAddress" : {
+                "nodetype" : "namednumber",
+                "number" : "12"
+            },
+            "sourceTransMask" : {
+                "nodetype" : "namednumber",
+                "number" : "13"
+            },
+            "destInterface" : {
+                "nodetype" : "namednumber",
+                "number" : "14"
+            },
+            "destAdjacentType" : {
+                "nodetype" : "namednumber",
+                "number" : "15"
+            },
+            "destAdjacentAddress" : {
+                "nodetype" : "namednumber",
+                "number" : "16"
+            },
+            "destAdjacentMask" : {
+                "nodetype" : "namednumber",
+                "number" : "17"
+            },
+            "destPeerType" : {
+                "nodetype" : "namednumber",
+                "number" : "18"
+            },
+            "destPeerAddress" : {
+                "nodetype" : "namednumber",
+                "number" : "19"
+            },
+            "destPeerMask" : {
+                "nodetype" : "namednumber",
+                "number" : "20"
+            },
+            "destTransType" : {
+                "nodetype" : "namednumber",
+                "number" : "21"
+            },
+            "destTransAddress" : {
+                "nodetype" : "namednumber",
+                "number" : "22"
+            },
+            "destTransMask" : {
+                "nodetype" : "namednumber",
+                "number" : "23"
+            },
+            "pduScale" : {
+                "nodetype" : "namednumber",
+                "number" : "24"
+            },
+            "octetScale" : {
+                "nodetype" : "namednumber",
+                "number" : "25"
+            },
+            "ruleSet" : {
+                "nodetype" : "namednumber",
+                "number" : "26"
+            },
+            "toOctets" : {
+                "nodetype" : "namednumber",
+                "number" : "27"
+            },
+            "toPDUs" : {
+                "nodetype" : "namednumber",
+                "number" : "28"
+            },
+            "fromOctets" : {
+                "nodetype" : "namednumber",
+                "number" : "29"
+            },
+            "fromPDUs" : {
+                "nodetype" : "namednumber",
+                "number" : "30"
+            },
+            "firstTime" : {
+                "nodetype" : "namednumber",
+                "number" : "31"
+            },
+            "lastActiveTime" : {
+                "nodetype" : "namednumber",
+                "number" : "32"
+            },
+            "sourceSubscriberID" : {
+                "nodetype" : "namednumber",
+                "number" : "33"
+            },
+            "destSubscriberID" : {
+                "nodetype" : "namednumber",
+                "number" : "34"
+            },
+            "sessionID" : {
+                "nodetype" : "namednumber",
+                "number" : "35"
+            },
+            "sourceClass" : {
+                "nodetype" : "namednumber",
+                "number" : "36"
+            },
+            "destClass" : {
+                "nodetype" : "namednumber",
+                "number" : "37"
+            },
+            "flowClass" : {
+                "nodetype" : "namednumber",
+                "number" : "38"
+            },
+            "sourceKind" : {
+                "nodetype" : "namednumber",
+                "number" : "39"
+            },
+            "destKind" : {
+                "nodetype" : "namednumber",
+                "number" : "40"
+            },
+            "flowKind" : {
+                "nodetype" : "namednumber",
+                "number" : "41"
+            },
+            "description" :
+                """Uniquely identifies an attribute within a flow data record.""",
+        },
+        "RuleAttributeNumber" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "null" : {
+                "nodetype" : "namednumber",
+                "number" : "0"
+            },
+            "sourceInterface" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "sourceAdjacentType" : {
+                "nodetype" : "namednumber",
+                "number" : "5"
+            },
+            "sourceAdjacentAddress" : {
+                "nodetype" : "namednumber",
+                "number" : "6"
+            },
+            "sourcePeerType" : {
+                "nodetype" : "namednumber",
+                "number" : "8"
+            },
+            "sourcePeerAddress" : {
+                "nodetype" : "namednumber",
+                "number" : "9"
+            },
+            "sourceTransType" : {
+                "nodetype" : "namednumber",
+                "number" : "11"
+            },
+            "sourceTransAddress" : {
+                "nodetype" : "namednumber",
+                "number" : "12"
+            },
+            "destInterface" : {
+                "nodetype" : "namednumber",
+                "number" : "14"
+            },
+            "destAdjacentType" : {
+                "nodetype" : "namednumber",
+                "number" : "15"
+            },
+            "destAdjacentAddress" : {
+                "nodetype" : "namednumber",
+                "number" : "16"
+            },
+            "destPeerType" : {
+                "nodetype" : "namednumber",
+                "number" : "18"
+            },
+            "destPeerAddress" : {
+                "nodetype" : "namednumber",
+                "number" : "19"
+            },
+            "destTransType" : {
+                "nodetype" : "namednumber",
+                "number" : "21"
+            },
+            "destTransAddress" : {
+                "nodetype" : "namednumber",
+                "number" : "22"
+            },
+            "sourceSubscriberID" : {
+                "nodetype" : "namednumber",
+                "number" : "33"
+            },
+            "destSubscriberID" : {
+                "nodetype" : "namednumber",
+                "number" : "34"
+            },
+            "sessionID" : {
+                "nodetype" : "namednumber",
+                "number" : "35"
+            },
+            "sourceClass" : {
+                "nodetype" : "namednumber",
+                "number" : "36"
+            },
+            "destClass" : {
+                "nodetype" : "namednumber",
+                "number" : "37"
+            },
+            "flowClass" : {
+                "nodetype" : "namednumber",
+                "number" : "38"
+            },
+            "sourceKind" : {
+                "nodetype" : "namednumber",
+                "number" : "39"
+            },
+            "destKind" : {
+                "nodetype" : "namednumber",
+                "number" : "40"
+            },
+            "flowKind" : {
+                "nodetype" : "namednumber",
+                "number" : "41"
+            },
+            "matchingStoD" : {
+                "nodetype" : "namednumber",
+                "number" : "50"
+            },
+            "v1" : {
+                "nodetype" : "namednumber",
+                "number" : "51"
+            },
+            "v2" : {
+                "nodetype" : "namednumber",
+                "number" : "52"
+            },
+            "v3" : {
+                "nodetype" : "namednumber",
+                "number" : "53"
+            },
+            "v4" : {
+                "nodetype" : "namednumber",
+                "number" : "54"
+            },
+            "v5" : {
+                "nodetype" : "namednumber",
+                "number" : "55"
+            },
+            "description" :
+                """Uniquely identifies an attribute which may be tested in
+a rule.  These include attributes whose values come directly
+from (or are computed from) the flow's packets, and the five
+'meter' variables used to hold an Attribute Number.""",
+        },
+        "ActionNumber" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "ignore" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "noMatch" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "count" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "countPkt" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "return" : {
+                "nodetype" : "namednumber",
+                "number" : "5"
+            },
+            "gosub" : {
+                "nodetype" : "namednumber",
+                "number" : "6"
+            },
+            "gosubAct" : {
+                "nodetype" : "namednumber",
+                "number" : "7"
+            },
+            "assign" : {
+                "nodetype" : "namednumber",
+                "number" : "8"
+            },
+            "assignAct" : {
+                "nodetype" : "namednumber",
+                "number" : "9"
+            },
+            "goto" : {
+                "nodetype" : "namednumber",
+                "number" : "10"
+            },
+            "gotoAct" : {
+                "nodetype" : "namednumber",
+                "number" : "11"
+            },
+            "pushRuleTo" : {
+                "nodetype" : "namednumber",
+                "number" : "12"
+            },
+            "pushRuleToAct" : {
+                "nodetype" : "namednumber",
+                "number" : "13"
+            },
+            "pushPktTo" : {
+                "nodetype" : "namednumber",
+                "number" : "14"
+            },
+            "pushPktToAct" : {
+                "nodetype" : "namednumber",
+                "number" : "15"
+            },
+            "popTo" : {
+                "nodetype" : "namednumber",
+                "number" : "16"
+            },
+            "popToAct" : {
+                "nodetype" : "namednumber",
+                "number" : "17"
+            },
+            "description" :
+                """Uniquely identifies the action of a rule, i.e. the Pattern
+Matching Engine's opcode number.  Details of the opcodes
+are given in the 'Traffic Flow Measurement: Architecture'
+document [RTFM-ARC].""",
+        },
+    }, # typedefs
+
+    "nodes" : {
+        "flowMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40",
+            "status" : "current",
+        }, # node
+        "flowControl" : {
+            "nodetype" : "node",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1",
+        }, # node
+        "flowRuleSetInfoTable" : {
+            "nodetype" : "table",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.1",
+            "status" : "current",
+            "description" :
+                """An array of information about the RuleSets held in the
+meter.
+
+Any manager may configure a new RuleSet for the meter by
+creating a row in this table with status active(1), and setting
+values for all the objects in its rules.  At this stage the new
+RuleSet is available but not 'running', i.e. it is not being
+used by the meter to produce entries in the flow table.
+
+To actually 'run' a RuleSet a manager must create a row in
+the flowManagerInfoTable, set it's flowManagerStatus to
+active(1), and set either its CurrentRuleSet or StandbyRuleSet
+to point to the RuleSet to be run.
+
+Once a RuleSet is running a manager may not change any of the
+objects within the RuleSet itself.  Any attempt to do so should
+result in a notWritable(17) SNMP error-status for such objects.
+
+A manager may stop a RuleSet running by removing all
+references to it in the flowManagerInfoTable (i.e. by setting
+CurrentRuleSet and StandbyRuleSet values to 0).  This provides
+a way to stop RuleSets left running if a manager fails.
+For example, when a manager is started, it could search the
+meter's flowManager table and stop all RuleSets having a
+specified value of flowRuleInfoOwner.
+
+To prevent a manager from interfering with variables belonging
+to another manager, the meter should use MIB views [RFC2575] so
+as to limit each manager's access to the meter's variables,
+effectively dividing the single meter into several virtual
+meters, one for each independent manager.""",
+        }, # table
+        "flowRuleSetInfoEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.1.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "flowRuleInfoIndex",
+            ],
+            "description" :
+                """Information about a particular RuleSet.""",
+        }, # row
+        "flowRuleInfoIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """An index which selects an entry in the flowRuleSetInfoTable.
+Each such entry contains control information for a particular
+RuleSet which the meter may run.""",
+        }, # column
+        "flowRuleInfoSize" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Number of rules in this RuleSet.  Setting this variable will
+cause the meter to allocate space for these rules.""",
+        }, # column
+        "flowRuleInfoOwner" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "UTF8OwnerString"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Identifies the manager which 'owns' this RuleSet.  A manager
+must set this variable when creating a row in this table.""",
+        }, # column
+        "flowRuleInfoTimeStamp" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Time this row's associated RuleSet was last changed.""",
+        }, # column
+        "flowRuleInfoStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The status of this flowRuleSetInfoEntry. If this value is
+not active(1) the meter must not attempt to use the row's
+associated RuleSet.  Once its value has been set to active(1)
+a manager may not change any of the other variables in the
+row, nor the contents of the associated RuleSet.  Any attempt
+to do so should result in a notWritable(17) SNMP error-status
+for such variables or objects.
+
+To download a RuleSet, a manger could:
+   - Locate an open slot in the RuleSetInfoTable.
+   - Create a RuleSetInfoEntry by setting the status for this
+       open slot to createAndWait(5).
+   - Set flowRuleInfoSize and flowRuleInfoName as required.
+   - Download the rules into the row's rule table.
+   - Set flowRuleInfoStatus to active(1).
+
+The RuleSet would then be ready to run. The manager is not
+allowed to change the value of flowRuleInfoStatus from
+active(1) if the associated RuleSet is being referenced by any
+of the entries in the flowManagerInfoTable.
+
+Setting RuleInfoStatus to destroy(6) destroys the associated
+RuleSet together with any flow data collected by it.""",
+        }, # column
+        "flowRuleInfoName" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "127"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "127"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """An alphanumeric identifier used by managers and readers to
+identify a RuleSet.  For example, a manager wishing to run a
+RuleSet named WWW-FLOWS could search the flowRuleSetInfoTable
+to see whether the WWW-FLOWS RuleSet is already available on
+the meter.
+
+Note that references to RuleSets in the flowManagerInfoTable
+use indexes for their flowRuleSetInfoTable entries.  These may
+be different each time the RuleSet is loaded into a meter.""",
+        }, # column
+        "flowRuleInfoRulesReady" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.1.1.7",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Indicates whether the rules for this row's associated RuleSet
+are ready for use.  The meter will refuse to 'run' the RuleSet
+unless this variable has been set to true(1).
+While RulesReady is false(2), the manager may modify the
+RuleSet, for example by downloading rules into it.""",
+        }, # column
+        "flowRuleInfoFlowRecords" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of entries in the flow table for this RuleSet.
+These may be current (waiting for collection by one or more
+meter readers) or idle (waiting for the meter to recover
+their memory).""",
+        }, # column
+        "flowInterfaceTable" : {
+            "nodetype" : "table",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.2",
+            "status" : "current",
+            "description" :
+                """An array of information specific to each meter interface.""",
+        }, # table
+        "flowInterfaceEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.2.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+            ],
+            "description" :
+                """Information about a particular interface.""",
+        }, # row
+        "flowInterfaceSampleRate" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readwrite",
+            "default" : "1",
+            "description" :
+                """The parameter N for statistical counting on this interface.
+Set to N to count 1/Nth of the packets appearing at this
+interface.  A sampling rate of 1 counts all packets.
+A sampling rate of 0 results in the interface being ignored
+by the meter.
+
+A meter should choose its own algorithm to introduce variance
+into the sampling so that exactly every Nth packet is counted.
+The IPPM Working Group's RFC 'Framework for IP Performance
+Metrics' [IPPM-FRM] explains why this should be done, and sets
+out an algorithm for doing it.""",
+        }, # column
+        "flowInterfaceLostPackets" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of packets the meter has lost for this interface.
+Such losses may occur because the meter has been unable to
+keep up with the traffic volume.""",
+        }, # column
+        "flowReaderInfoTable" : {
+            "nodetype" : "table",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.3",
+            "status" : "current",
+            "description" :
+                """An array of information about meter readers which have
+registered their intent to collect flow data from this meter.""",
+        }, # table
+        "flowReaderInfoEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.3.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "flowReaderIndex",
+            ],
+            "description" :
+                """Information about a particular meter reader.""",
+        }, # row
+        "flowReaderIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """An index which selects an entry in the flowReaderInfoTable.""",
+        }, # column
+        "flowReaderTimeout" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Specifies the maximum time (in seconds) between flow data
+collections for this meter reader.  If this time elapses
+without a collection, the meter should assume that this meter
+reader has stopped collecting, and delete this row from the
+table.  A value of zero indicates that this row should not be
+timed out.""",
+        }, # column
+        "flowReaderOwner" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "UTF8OwnerString"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Identifies the meter reader which created this row.""",
+        }, # column
+        "flowReaderLastTime" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.3.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Time this meter reader began its most recent data collection.
+
+This variable should be written by a meter reader as its first
+step in reading flow data.  The meter will set this LastTime
+value to its current Uptime, and set its PreviousTime value
+(below) to the old  LastTime.  This allows the meter to
+recover flows which have been inactive since PreviousTime,
+for these have been collected at least once.
+
+If the meter reader fails to write flowLastReadTime, collection
+may still proceed but the meter may not be able to recover
+inactive flows until the flowReaderTimeout has been reached
+for this entry.""",
+        }, # column
+        "flowReaderPreviousTime" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.3.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Time this meter reader began the collection before last.""",
+        }, # column
+        "flowReaderStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.3.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The status of this FlowReaderInfoEntry. A value of active(1)
+implies that the associated reader should be collecting data
+from the meter.  Once this variable has been set to active(1)
+a manager may only change this row's flowReaderLastTime and
+flowReaderTimeout variables.""",
+        }, # column
+        "flowReaderRuleSet" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.3.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """An index to the array of RuleSets.  Specifies a set of rules
+of interest to this meter reader.  The reader will attempt to
+collect any data generated by the meter for this RuleSet, and
+the meter will not recover the memory of any of the RuleSet's
+flows until this collection has taken place.  Note that a
+reader may have entries in this table for several RuleSets.""",
+        }, # column
+        "flowManagerInfoTable" : {
+            "nodetype" : "table",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.4",
+            "status" : "current",
+            "description" :
+                """An array of information about managers which have
+registered their intent to run RuleSets on this meter.""",
+        }, # table
+        "flowManagerInfoEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.4.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "flowManagerIndex",
+            ],
+            "description" :
+                """Information about a particular meter 'task.'  By creating
+an entry in this table and activating it, a manager requests
+that the meter 'run' the indicated RuleSet.
+
+The entry also specifies a HighWaterMark and a StandbyRuleSet.
+If the meter's flow table usage exceeds this task's
+HighWaterMark the meter will stop running the task's
+CurrentRuleSet and switch to its StandbyRuleSet.
+
+If the value of the task's StandbyRuleSet is 0 when its
+HighWaterMark is exceeded, the meter simply stops running the
+task's CurrentRuleSet.  By careful selection of HighWaterMarks
+for the various tasks a manager can ensure that the most
+critical RuleSets are the last to stop running as the number
+of flows increases.
+
+When a manager has determined that the demand for flow table
+space has abated, it may cause the task to switch back to its
+CurrentRuleSet by setting its flowManagerRunningStandby
+variable to false(2).""",
+        }, # row
+        "flowManagerIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.4.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """An index which selects an entry in the flowManagerInfoTable.""",
+        }, # column
+        "flowManagerCurrentRuleSet" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.4.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Index to the array of RuleSets.  Specifies which set of
+rules is the 'current' one for this task.  The meter will
+be 'running' the current RuleSet if this row's
+flowManagerRunningStandby value is false(2).
+
+When the manager sets this variable the meter will stop using
+the task's old current RuleSet and start using the new one.
+Specifying RuleSet 0 (the empty set) stops flow measurement
+for this task.""",
+        }, # column
+        "flowManagerStandbyRuleSet" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.4.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """Index to the array of RuleSets.  After reaching HighWaterMark
+(see below) the manager will switch to using the task's
+StandbyRuleSet in place of its CurrentRuleSet.  For this to be
+effective the designated StandbyRuleSet should have a coarser
+reporting granularity then the CurrentRuleSet.  The manager may
+also need to decrease the meter reading interval so that the
+meter can recover flows measured by this task's CurrentRuleSet.""",
+        }, # column
+        "flowManagerHighWaterMark" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.4.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "100"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "100"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """A value expressed as a percentage, interpreted by the meter
+as an indication of how full the flow table should be before
+it should switch to the standby RuleSet (if one has been
+specified) for this task.  Values of 0% or 100% disable the
+checking represented by this variable.""",
+        }, # column
+        "flowManagerCounterWrap" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.4.1.5",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "wrap" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "scale" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "wrap",
+            "description" :
+                """Specifies whether PDU and octet counters should wrap when
+they reach the top of their range (normal behaviour for
+Counter64 objects), or whether their scale factors should
+be used instead.  The combination of counter and scale
+factor allows counts to be returned as non-negative binary
+floating point numbers, with 64-bit mantissas and 8-bit
+exponents.""",
+        }, # column
+        "flowManagerOwner" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.4.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "UTF8OwnerString"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Identifies the manager which created this row.""",
+        }, # column
+        "flowManagerTimeStamp" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.4.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Time this row was last changed by its manager.""",
+        }, # column
+        "flowManagerStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.4.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The status of this row in the flowManagerInfoTable.  A value
+of active(1) implies that this task may be activated, by
+setting its CurrentRuleSet and StandbyRuleSet variables.
+Its HighWaterMark and RunningStandby variables may also be
+changed.""",
+        }, # column
+        "flowManagerRunningStandby" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.4.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "default" : "false",
+            "description" :
+                """Set to true(1) by the meter to indicate that it has switched
+to runnning this task's StandbyRuleSet in place of its
+CurrentRuleSet.  To switch back to the CurrentRuleSet, the
+manager may simply set this variable to false(2).""",
+        }, # column
+        "flowFloodMark" : {
+            "nodetype" : "scalar",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "100"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "100"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "95",
+            "description" :
+                """A value expressed as a percentage, interpreted by the meter
+as an indication of how full the flow table should be before
+it should take some action to avoid running out of resources
+to handle new flows, as discussed in section 4.6 (Handling
+Increasing Traffic Levels) of the RTFM Architecture RFC
+[RTFM-ARC].
+
+Values of 0% or 100% disable the checking represented by
+this variable.""",
+        }, # scalar
+        "flowInactivityTimeout" : {
+            "nodetype" : "scalar",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readwrite",
+            "default" : "600",
+            "description" :
+                """The time in seconds since the last packet seen, after which
+a flow becomes 'idle.'  Note that although a flow may be
+idle, it will not be discarded (and its memory recovered)
+until after its data has been collected by all the meter
+readers registered for its RuleSet.""",
+        }, # scalar
+        "flowActiveFlows" : {
+            "nodetype" : "scalar",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of flows which are currently in use.""",
+        }, # scalar
+        "flowMaxFlows" : {
+            "nodetype" : "scalar",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The maximum number of flows allowed in the meter's
+flow table.  At present this is determined when the meter
+is first started up.""",
+        }, # scalar
+        "flowFloodMode" : {
+            "nodetype" : "scalar",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Indicates that the meter has passed its FloodMark and is
+not running in its normal mode.
+
+When the manager notices this it should take action to remedy
+the problem which caused the flooding.  It should then monitor
+flowActiveFlows so as to determine when the flood has receded.
+At that point the manager may set flowFloodMode to false(2) to
+resume normal operation.""",
+        }, # scalar
+        "flowData" : {
+            "nodetype" : "node",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2",
+        }, # node
+        "flowDataTable" : {
+            "nodetype" : "table",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1",
+            "status" : "current",
+            "description" :
+                """The list of all flows being measured.""",
+        }, # table
+        "flowDataEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1",
+            "status" : "current",
+            "linkage" : [
+                "flowDataRuleSet",
+                "flowDataTimeMark",
+                "flowDataIndex",
+            ],
+            "description" :
+                """The flow data record for a particular flow.""",
+        }, # row
+        "flowDataIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """Value of this flow data record's index within the meter's
+flow table.""",
+        }, # column
+        "flowDataTimeMark" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RMON2-MIB", "name" : "TimeFilter"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """A TimeFilter for this entry.  Allows GetNext and GetBulk
+to find flow table rows which have changed since a specified
+value of the meter's Uptime.""",
+        }, # column
+        "flowDataStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.3",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "inactive" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "current" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Status of this flow data record.""",
+        }, # column
+        "flowDataSourceInterface" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Index of the interface associated with the source address
+for this flow.  It's value is one of those contained in the
+ifIndex field of the meter's interfaces table.""",
+        }, # column
+        "flowDataSourceAdjacentType" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "AdjacentType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Adjacent address type of the source for this flow.
+
+If metering is being performed at the network level,
+AdjacentType will indicate the medium for the interface on
+which the flow was observed and AdjacentAddress will be the
+MAC address for that interface.  This is the usual case.
+
+If traffic is being metered inside a tunnel, AdjacentType will
+be the peer type of the host at the end of the tunnel and
+AdjacentAddress will be the peer address for that host.""",
+        }, # column
+        "flowDataSourceAdjacentAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "AdjacentAddress"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Address of the adjacent device on the path for the source
+for this flow.""",
+        }, # column
+        "flowDataSourceAdjacentMask" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "AdjacentAddress"},
+            },
+            "access" : "readonly",
+            "description" :
+                """1-bits in this mask indicate which bits must match when
+comparing the adjacent source address for this flow.""",
+        }, # column
+        "flowDataSourcePeerType" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "PeerType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Peer address type of the source for this flow.""",
+        }, # column
+        "flowDataSourcePeerAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "PeerAddress"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Address of the peer device for the source of this flow.""",
+        }, # column
+        "flowDataSourcePeerMask" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "PeerAddress"},
+            },
+            "access" : "readonly",
+            "description" :
+                """1-bits in this mask indicate which bits must match when
+comparing the source peer address for this flow.""",
+        }, # column
+        "flowDataSourceTransType" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "TransportType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Transport address type of the source for this flow.  The
+value of this attribute will depend on the peer address type.""",
+        }, # column
+        "flowDataSourceTransAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "TransportAddress"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Transport address for the source of this flow.""",
+        }, # column
+        "flowDataSourceTransMask" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "TransportAddress"},
+            },
+            "access" : "readonly",
+            "description" :
+                """1-bits in this mask indicate which bits must match when
+comparing the transport source address for this flow.""",
+        }, # column
+        "flowDataDestInterface" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Index of the interface associated with the dest address for
+this flow.  This value is one of the values contained in the
+ifIndex field of the interfaces table.""",
+        }, # column
+        "flowDataDestAdjacentType" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "AdjacentType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Adjacent address type of the destination for this flow.""",
+        }, # column
+        "flowDataDestAdjacentAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "AdjacentAddress"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Address of the adjacent device on the path for the
+destination for this flow.""",
+        }, # column
+        "flowDataDestAdjacentMask" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.17",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "AdjacentAddress"},
+            },
+            "access" : "readonly",
+            "description" :
+                """1-bits in this mask indicate which bits must match when
+comparing the adjacent destination address for this flow.""",
+        }, # column
+        "flowDataDestPeerType" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.18",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "PeerType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Peer address type of the destination for this flow.""",
+        }, # column
+        "flowDataDestPeerAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.19",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "PeerAddress"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Address of the peer device for the destination of this flow.""",
+        }, # column
+        "flowDataDestPeerMask" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.20",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "PeerAddress"},
+            },
+            "access" : "readonly",
+            "description" :
+                """1-bits in this mask indicate which bits must match when
+comparing the destination peer type for this flow.""",
+        }, # column
+        "flowDataDestTransType" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.21",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "TransportType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Transport address type of the destination for this flow.  The
+value of this attribute will depend on the peer address type.""",
+        }, # column
+        "flowDataDestTransAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.22",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "TransportAddress"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Transport address for the destination of this flow.""",
+        }, # column
+        "flowDataDestTransMask" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.23",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "TransportAddress"},
+            },
+            "access" : "readonly",
+            "description" :
+                """1-bits in this mask indicate which bits must match when
+comparing the transport destination address for this flow.""",
+        }, # column
+        "flowDataPDUScale" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.24",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The scale factor applied to this particular flow.  Indicates
+the number of bits the PDU counter values should be moved left
+to obtain the actual values.""",
+        }, # column
+        "flowDataOctetScale" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.25",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The scale factor applied to this particular flow.  Indicates
+the number of bits the octet counter values should be moved
+left to obtain the actual values.""",
+        }, # column
+        "flowDataRuleSet" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.26",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """The RuleSet number of the RuleSet which created this flow.
+Allows a manager to use GetNext or GetBulk requests to find
+flows belonging to a particular RuleSet.""",
+        }, # column
+        "flowDataToOctets" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.27",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The count of octets flowing from source to destination
+for this flow.""",
+        }, # column
+        "flowDataToPDUs" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.28",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The count of packets flowing from source to destination
+for this flow.""",
+        }, # column
+        "flowDataFromOctets" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.29",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The count of octets flowing from destination to source
+for this flow.""",
+        }, # column
+        "flowDataFromPDUs" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.30",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The count of packets flowing from destination to source
+for this flow.""",
+        }, # column
+        "flowDataFirstTime" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.31",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The time at which this flow was first entered in the table""",
+        }, # column
+        "flowDataLastActiveTime" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.32",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The last time this flow had activity, i.e. the time of
+arrival of the most recent PDU belonging to this flow.""",
+        }, # column
+        "flowDataSourceSubscriberID" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.33",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "4",
+                        "max" : "20"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "4",
+                        "max" : "20"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Subscriber ID associated with the source address for this
+flow.  A Subscriber ID is an unspecified text string, used
+to ascribe traffic flows to individual users.  At this time
+the means by which a Subscriber ID may be associated with a
+flow is unspecified.""",
+        }, # column
+        "flowDataDestSubscriberID" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.34",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "4",
+                        "max" : "20"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "4",
+                        "max" : "20"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Subscriber ID associated with the destination address for
+this flow.  A Subscriber ID is an unspecified text string,
+used to ascribe traffic flows to individual users.  At this
+time the means by which a Subscriber ID may be associated
+with a flow is unspecified.""",
+        }, # column
+        "flowDataSessionID" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.35",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "4",
+                        "max" : "10"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "4",
+                        "max" : "10"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Session ID for this flow.  Such an ID might be allocated
+by a network access server to distinguish a series of sessions
+between the same pair of addresses, which would otherwise
+appear to be parts of the same accounting flow.""",
+        }, # column
+        "flowDataSourceClass" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.36",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Source class for this flow.  Determined by the rules, set by
+a PushRule action when this flow was entered in the table.""",
+        }, # column
+        "flowDataDestClass" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.37",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Destination class for this flow.  Determined by the rules, set
+by a PushRule action when this flow was entered in the table.""",
+        }, # column
+        "flowDataClass" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.38",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Class for this flow.  Determined by the rules, set by a
+PushRule action when this flow was entered in the table.""",
+        }, # column
+        "flowDataSourceKind" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.39",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Source kind for this flow.  Determined by the rules, set by
+a PushRule action when this flow was entered in the table.""",
+        }, # column
+        "flowDataDestKind" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.40",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Destination kind for this flow.  Determined by the rules, set
+by a PushRule action when this flow was entered in the table.""",
+        }, # column
+        "flowDataKind" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.1.1.41",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Class for this flow.  Determined by the rules, set by a
+PushRule action when this flow was entered in the table.""",
+        }, # column
+        "flowColumnActivityTable" : {
+            "nodetype" : "table",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.2",
+            "status" : "deprecated",
+            "description" :
+                """Index into the Flow Table.  Allows a meter reader to retrieve
+a list containing the flow table indexes of flows which were
+last active at or after a given time, together with the values
+of a specified attribute for each such flow.""",
+        }, # table
+        "flowColumnActivityEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.2.1",
+            "status" : "deprecated",
+            "linkage" : [
+                "flowColumnActivityAttribute",
+                "flowColumnActivityTime",
+                "flowColumnActivityIndex",
+            ],
+            "description" :
+                """The Column Activity Entry for a particular attribute,
+activity time and flow.""",
+        }, # row
+        "flowColumnActivityAttribute" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.2.1.1",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "FlowAttributeNumber"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Specifies the attribute for which values are required from
+active flows.""",
+        }, # column
+        "flowColumnActivityTime" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.2.1.2",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" : { "module" :"RMON2-MIB", "name" : "TimeFilter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This variable is a copy of flowDataLastActiveTime in the
+flow data record identified by the flowColumnActivityIndex
+value of this flowColumnActivityTable entry.""",
+        }, # column
+        "flowColumnActivityIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.2.1.3",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Index of a flow table entry which was active at or after
+a specified flowColumnActivityTime.""",
+        }, # column
+        "flowColumnActivityData" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.2.1.4",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "3",
+                        "max" : "1000"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "3",
+                        "max" : "1000"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Collection of attribute data for flows active after
+flowColumnActivityTime.  Within the OCTET STRING is a
+sequence of { flow index, attribute value } pairs, one for
+each active flow.  The end of the sequence is marked by a
+flow index value of 0, indicating that there are no more
+rows in this column.
+
+The format of objects inside flowColumnFlowData is as follows.
+All numbers are unsigned.  Numbers and strings appear with
+their high-order bytes leading.  Numbers are fixed size, as
+specified by their SYNTAX in the flow table (above), i.e. one
+octet for flowAddressType and small constants, and four octets
+for Counter and TimeStamp.  Strings are variable-length, with
+the length given in a single leading octet.
+
+The following is an attempt at an ASN.1 definition of
+flowColumnActivityData:
+
+flowColumnActivityData ::= SEQUENCE flowRowItemEntry
+flowRowItemEntry ::= SEQUENCE {
+   flowRowNumber    Integer32 (1..65535),
+                         -- 0 indicates the end of this column
+   flowDataValue   flowDataType -- Choice depends on attribute
+   }
+flowDataType ::= CHOICE {
+    flowByteValue   Integer32 (1..255),
+    flowShortValue  Integer32 (1..65535),
+    flowLongValue   Integer32,
+    flowStringValue OCTET STRING  -- Length (n) in first byte,
+          -- n+1 bytes total length, trailing zeroes truncated
+    }""",
+        }, # column
+        "flowDataPackageTable" : {
+            "nodetype" : "table",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.3",
+            "status" : "current",
+            "description" :
+                """Index into the Flow Table.  Allows a meter reader to retrieve
+a sequence containing the values of a specified set of
+attributes for a flow which came from a specified RuleSet and
+which was last active at or after a given time.""",
+        }, # table
+        "flowDataPackageEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.3.1",
+            "status" : "current",
+            "linkage" : [
+                "flowPackageSelector",
+                "flowPackageRuleSet",
+                "flowPackageTime",
+                "flowPackageIndex",
+            ],
+            "description" :
+                """The data package containing selected variables from
+active rows in the flow table.""",
+        }, # row
+        "flowPackageSelector" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "OctetString"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """Specifies the attributes for which values are required from
+an active flow.  These are encoded as a sequence of octets
+each containing a FlowAttribute number, preceded by an octet
+giving the length of the sequence (not including the length
+octet).  For a flowPackageSelector to be valid, it must
+contain at least one attribute.""",
+        }, # column
+        "flowPackageRuleSet" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """Specifies the index (in the flowRuleSetInfoTable) of the rule
+set which produced the required flow.""",
+        }, # column
+        "flowPackageTime" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RMON2-MIB", "name" : "TimeFilter"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This variable is a copy of flowDataLastActiveTime in the
+flow data record identified by the flowPackageIndex
+value of this flowPackageTable entry.""",
+        }, # column
+        "flowPackageIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.3.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """Index of a flow table entry which was active at or after
+a specified flowPackageTime.""",
+        }, # column
+        "flowPackageData" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.2.3.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "OctetString"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A collection of attribute values for a single flow, as
+specified by this row's indexes.  The attribute values are
+contained within a BER-encoded sequence [ASN-1, ASN-BER],
+in the order they appear in their flowPackageSelector.
+
+For example, to retrieve a flowPackage containing values for
+attributes 11, 18 and 29, for a flow in RuleSet 7, with flow
+index 3447, one would GET the package whose Object Identifier
+(OID) is
+    flowPackageData . 3.11.18.29 . 7. 0 . 3447
+
+To get a package for the next such flow which had been
+active since time 12345 one would GETNEXT the package whose
+Object Identifier (OID) is
+    flowPackageData . 3.11.18.29 . 7. 12345 . 3447""",
+        }, # column
+        "flowRules" : {
+            "nodetype" : "node",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.3",
+        }, # node
+        "flowRuleTable" : {
+            "nodetype" : "table",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.3.1",
+            "status" : "current",
+            "description" :
+                """Contains all the RuleSets which may be used by the meter.""",
+        }, # table
+        "flowRuleEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.3.1.1",
+            "status" : "current",
+            "linkage" : [
+                "flowRuleSet",
+                "flowRuleIndex",
+            ],
+            "description" :
+                """The rule record itself.""",
+        }, # row
+        "flowRuleSet" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.3.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """Selects a RuleSet from the array of RuleSets.""",
+        }, # column
+        "flowRuleIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.3.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """The index into the Rule table.  N.B: These values will
+normally be consecutive, given the fall-through semantics
+of processing the table.""",
+        }, # column
+        "flowRuleSelector" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.3.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "RuleAttributeNumber"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Indicates the attribute to be matched.
+
+null(0) is a special case; null rules always succeed.
+matchingStoD(50) is set by the meter's Packet Matching Engine.
+Its value is true(1) if the PME is attempting to match the
+packet with its addresses in Source-to-Destination order (i.e.
+as they appear in the packet), and false(2) otherwise.
+Details of how packets are matched are given in the 'Traffic
+Flow Measurement: Architecture' document [RTFM-ARC].
+v1(51), v2(52), v3(53), v4(54) and v5(55) select meter
+variables, each of which can hold the name (i.e. selector
+value) of an address attribute.  When one of these is used
+as a selector, its value specifies the attribute to be
+tested.  Variable values are set by an Assign action.""",
+        }, # column
+        "flowRuleMask" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.3.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "RuleAddress"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The initial mask used to compute the desired value.  If the
+mask is zero the rule's test will always succeed.""",
+        }, # column
+        "flowRuleMatchedValue" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.3.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "RuleAddress"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The resulting value to be matched for equality.
+Specifically, if the attribute chosen by the flowRuleSelector
+logically ANDed with the mask specified by the flowRuleMask
+equals the value specified in the flowRuleMatchedValue, then
+continue processing the table entry based on the action
+specified by the flowRuleAction entry.  Otherwise, proceed to
+the next entry in the rule table.""",
+        }, # column
+        "flowRuleAction" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.3.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FLOW-METER-MIB", "name" : "ActionNumber"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The action to be taken if this rule's test succeeds, or if
+the meter's 'test' flag is off.  Actions are opcodes for the
+meter's Packet Matching Engine; details are given in the
+'Traffic Flow Measurement: Architecture' document [RTFM-ARC].""",
+        }, # column
+        "flowRuleParameter" : {
+            "nodetype" : "column",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.3.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """A parameter value providing extra information for this rule's
+action.  Most of the actions use the parameter value to specify
+which rule to execute after this rule's test has failed; details
+are given in the 'Traffic Flow Measurement: Architecture'
+document [RTFM-ARC].""",
+        }, # column
+        "flowMIBConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.4",
+        }, # node
+        "flowMIBCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.4.1",
+        }, # node
+        "flowMIBGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.4.2",
+        }, # node
+    }, # nodes
+
+    "groups" : {
+        "flowControlGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.4.2.1",
+            "status" : "deprecated",
+            "members" : {
+                "flowRuleInfoSize" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowRuleInfoOwner" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowRuleInfoTimeStamp" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowRuleInfoStatus" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowRuleInfoName" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowRuleInfoRulesReady" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowRuleInfoFlowRecords" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowInterfaceSampleRate" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowInterfaceLostPackets" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowReaderTimeout" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowReaderOwner" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowReaderLastTime" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowReaderPreviousTime" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowReaderStatus" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowReaderRuleSet" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowManagerCurrentRuleSet" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowManagerStandbyRuleSet" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowManagerHighWaterMark" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowManagerCounterWrap" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowManagerOwner" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowManagerTimeStamp" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowManagerStatus" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowManagerRunningStandby" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowFloodMark" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowInactivityTimeout" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowActiveFlows" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowMaxFlows" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowFloodMode" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+            }, # members
+            "description" :
+                """The control group defines objects which are used to control
+an accounting meter.""",
+        }, # group
+        "flowDataTableGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.4.2.2",
+            "status" : "deprecated",
+            "members" : {
+                "flowDataStatus" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataSourceInterface" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataSourceAdjacentType" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataSourceAdjacentAddress" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataSourceAdjacentMask" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataSourcePeerType" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataSourcePeerAddress" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataSourcePeerMask" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataSourceTransType" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataSourceTransAddress" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataSourceTransMask" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataDestInterface" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataDestAdjacentType" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataDestAdjacentAddress" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataDestAdjacentMask" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataDestPeerType" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataDestPeerAddress" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataDestPeerMask" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataDestTransType" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataDestTransAddress" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataDestTransMask" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataToOctets" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataToPDUs" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataFromOctets" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataFromPDUs" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataFirstTime" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataLastActiveTime" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataSourceClass" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataDestClass" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataClass" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataSourceKind" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataDestKind" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataKind" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+            }, # members
+            "description" :
+                """The flow table group defines objects which provide the
+structure for the flow table, including the creation time
+and activity time indexes into it.  In addition it defines
+objects which provide a base set of flow attributes for the
+adjacent, peer and transport layers, together with a flow's
+counters and times.  Finally it defines a flow's class and
+kind attributes, which are set by rule actions.""",
+        }, # group
+        "flowDataScaleGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.4.2.3",
+            "status" : "deprecated",
+            "members" : {
+                "flowManagerCounterWrap" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataPDUScale" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataOctetScale" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+            }, # members
+            "description" :
+                """The flow scale group defines objects which specify scale
+factors for counters.""",
+        }, # group
+        "flowDataSubscriberGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.4.2.4",
+            "status" : "current",
+            "members" : {
+                "flowDataSourceSubscriberID" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataDestSubscriberID" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataSessionID" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+            }, # members
+            "description" :
+                """The flow subscriber group defines objects which may be used
+to identify the end point(s) of a flow.""",
+        }, # group
+        "flowDataColumnTableGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.4.2.5",
+            "status" : "deprecated",
+            "members" : {
+                "flowColumnActivityAttribute" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowColumnActivityIndex" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowColumnActivityTime" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowColumnActivityData" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+            }, # members
+            "description" :
+                """The flow column table group defines objects which can be used
+to collect part of a column of attribute values from the flow
+table.""",
+        }, # group
+        "flowDataPackageGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.4.2.6",
+            "status" : "current",
+            "members" : {
+                "flowPackageData" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+            }, # members
+            "description" :
+                """The data package group defines objects which can be used
+to collect a specified set of attribute values from a row of
+the flow table.""",
+        }, # group
+        "flowRuleTableGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.4.2.7",
+            "status" : "current",
+            "members" : {
+                "flowRuleSelector" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowRuleMask" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowRuleMatchedValue" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowRuleAction" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowRuleParameter" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+            }, # members
+            "description" :
+                """The rule table group defines objects which hold the set(s)
+of rules specifying which traffic flows are to be accounted
+for.""",
+        }, # group
+        "flowDataScaleGroup2" : {
+            "nodetype" : "group",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.4.2.8",
+            "status" : "current",
+            "members" : {
+                "flowDataPDUScale" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataOctetScale" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+            }, # members
+            "description" :
+                """The flow scale group defines objects which specify scale
+factors for counters.  This group replaces the earlier
+version of flowDataScaleGroup above (now deprecated).""",
+        }, # group
+        "flowControlGroup2" : {
+            "nodetype" : "group",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.4.2.9",
+            "status" : "current",
+            "members" : {
+                "flowRuleInfoSize" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowRuleInfoOwner" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowRuleInfoTimeStamp" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowRuleInfoStatus" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowRuleInfoName" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowRuleInfoFlowRecords" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowInterfaceSampleRate" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowInterfaceLostPackets" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowReaderTimeout" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowReaderOwner" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowReaderLastTime" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowReaderPreviousTime" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowReaderStatus" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowReaderRuleSet" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowManagerCurrentRuleSet" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowManagerStandbyRuleSet" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowManagerHighWaterMark" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowManagerOwner" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowManagerTimeStamp" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowManagerStatus" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowManagerRunningStandby" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowFloodMark" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowInactivityTimeout" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowActiveFlows" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowMaxFlows" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowFloodMode" : {
+                    "nodetype" : "member",
+                    "module" : "FLOW-METER-MIB"
+                },
+            }, # members
+            "description" :
+                """The control group defines objects which are used to control
+an accounting meter.  It replaces the earlier version of
+flowControlGroup above (now deprecated).""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "flowMIBCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "FLOW-METER-MIB",
+            "oid" : "1.3.6.1.2.1.40.4.1.1",
+            "status" : "current",
+            "description" :
+                """The compliance statement for a Traffic Flow Meter.""",
+            "requires" : {
+                "flowControlGroup2" : {
+                    "nodetype" : "mandatory",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataTableGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowDataPackageGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "FLOW-METER-MIB"
+                },
+                "flowRuleTableGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "FLOW-METER-MIB"
+                },
+            }, # requires
+        }, # compliance
+    }, # compliances
+
+}