logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/EtherLike-MIB.dic

@@ -0,0 +1,2548 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python EtherLike-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/EtherLike-MIB"
+
+MIB = {
+    "moduleName" : "EtherLike-MIB",
+
+    "EtherLike-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF Ethernet Interfaces and Hub MIB
+Working Group""",
+        "contact" : 
+            """WG E-mail: hubmib@ietf.org
+To subscribe: hubmib-request@ietf.org
+
+       Chair: Dan Romascanu
+      Postal: Avaya Inc.
+              Atidum Technology Park, Bldg. 3
+              Tel Aviv 61131
+              Israel
+         Tel: +972 3 645 8414
+      E-mail: dromasca@avaya.com
+
+     Editor: John Flick
+     Postal: Hewlett-Packard Company
+             8000 Foothills Blvd. M/S 5557
+             Roseville, CA 95747-5557
+             USA
+        Tel: +1 916 785 4018
+        Fax: +1 916 785 1199
+     E-mail: johnf@rose.hp.com""",
+        "description" :
+            """The MIB module to describe generic objects for
+ethernet-like network interfaces.
+
+The following reference is used throughout this
+MIB module:
+
+[IEEE 802.3 Std] refers to:
+   IEEE Std 802.3, 2002 Edition: 'IEEE Standard
+
+
+
+   for Information technology -
+   Telecommunications and information exchange
+   between systems - Local and metropolitan
+   area networks - Specific requirements -
+   Part 3: Carrier sense multiple access with
+   collision detection (CSMA/CD) access method
+   and physical layer specifications', as
+   amended by IEEE Std 802.3ae-2002:
+   'Amendment: Media Access Control (MAC)
+   Parameters, Physical Layer, and Management
+   Parameters for 10 Gb/s Operation', August,
+   2002.
+
+Of particular interest is Clause 30, '10 Mb/s,
+100 Mb/s, 1000 Mb/s, and 10 Gb/s Management'.
+
+Copyright (C) The Internet Society (2003).  This
+version of this MIB module is part of RFC 3635;
+see the RFC itself for full legal notices.""",
+        "revisions" : (
+            {
+                "date" : "2003-09-19 00:00",
+                "description" :
+                    """Updated to include support for 10 Gb/sec
+interfaces.  This resulted in the following
+revisions:
+
+- Updated dot3StatsAlignmentErrors and
+  dot3StatsSymbolErrors DESCRIPTIONs to
+  reflect behaviour at 10 Gb/s
+- Added dot3StatsRateControlAbility and
+  dot3RateControlStatus for management
+  of the Rate Control function in 10 Gb/s
+  WAN applications
+- Added 64-bit versions of all counters
+  that are used on high-speed ethernet
+  interfaces
+- Added object groups to contain the new
+  objects
+- Deprecated etherStatsBaseGroup and
+  split into etherStatsBaseGroup2 and
+  etherStatsHalfDuplexGroup, so that
+  interfaces which can only operate at
+  full-duplex do not need to implement
+  half-duplex-only statistics
+- Deprecated dot3Compliance and replaced
+  it with dot3Compliance2, which includes
+  the compliance information for the new
+  object groups
+
+
+
+
+In addition, the dot3Tests and dot3Errors
+object identities have been deprecated,
+since there is no longer a standard method
+for using them.
+
+This version published as RFC 3635.""",
+            },
+            {
+                "date" : "1999-08-24 04:00",
+                "description" :
+                    """Updated to include support for 1000 Mb/sec
+interfaces and full-duplex interfaces.
+This version published as RFC 2665.""",
+            },
+            {
+                "date" : "1998-06-03 21:50",
+                "description" :
+                    """Updated to include support for 100 Mb/sec
+interfaces.
+This version published as RFC 2358.""",
+            },
+            {
+                "date" : "1994-02-03 04:00",
+                "description" :
+                    """Initial version, published as RFC 1650.""",
+            },
+        ),
+        "identity node" : "etherMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter32"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter64"},
+        {"module" : "SNMPv2-SMI", "name" : "mib-2"},
+        {"module" : "SNMPv2-SMI", "name" : "transmission"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "SNMPv2-TC", "name" : "TruthValue"},
+        {"module" : "IF-MIB", "name" : "ifIndex"},
+        {"module" : "IF-MIB", "name" : "InterfaceIndex"},
+    ),
+
+    "nodes" : {
+        "dot3" : {
+            "nodetype" : "node",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7",
+        }, # node
+        "dot3StatsTable" : {
+            "nodetype" : "table",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.2",
+            "status" : "current",
+            "description" :
+                """Statistics for a collection of ethernet-like
+interfaces attached to a particular system.
+There will be one row in this table for each
+ethernet-like interface in the system.""",
+        }, # table
+        "dot3StatsEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.2.1",
+            "status" : "current",
+            "linkage" : [
+                "dot3StatsIndex",
+            ],
+            "description" :
+                """Statistics for a particular interface to an
+ethernet-like medium.""",
+        }, # row
+        "dot3StatsIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "InterfaceIndex"},
+            },
+            "access" : "readonly",
+            "description" :
+                """An index value that uniquely identifies an
+interface to an ethernet-like medium.  The
+interface identified by a particular value of
+this index is the same interface as identified
+by the same value of ifIndex.""",
+            "reference" :
+                """RFC 2863, ifIndex""",
+        }, # column
+        "dot3StatsAlignmentErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of frames received on a particular
+interface that are not an integral number of
+octets in length and do not pass the FCS check.
+
+The count represented by an instance of this
+object is incremented when the alignmentError
+status is returned by the MAC service to the
+LLC (or other MAC user). Received frames for
+which multiple error conditions pertain are,
+according to the conventions of IEEE 802.3
+Layer Management, counted exclusively according
+
+
+
+to the error status presented to the LLC.
+
+This counter does not increment for group
+encoding schemes greater than 4 bits per group.
+
+For interfaces operating at 10 Gb/s, this
+counter can roll over in less than 5 minutes if
+it is incrementing at its maximum rate.  Since
+that amount of time could be less than a
+management station's poll cycle time, in order
+to avoid a loss of information, a management
+station is advised to poll the
+dot3HCStatsAlignmentErrors object for 10 Gb/s
+or faster interfaces.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.1.1.7,
+aAlignmentErrors""",
+        }, # column
+        "dot3StatsFCSErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of frames received on a particular
+interface that are an integral number of octets
+in length but do not pass the FCS check.  This
+count does not include frames received with
+frame-too-long or frame-too-short error.
+
+The count represented by an instance of this
+object is incremented when the frameCheckError
+status is returned by the MAC service to the
+LLC (or other MAC user). Received frames for
+which multiple error conditions pertain are,
+according to the conventions of IEEE 802.3
+Layer Management, counted exclusively according
+to the error status presented to the LLC.
+
+Note:  Coding errors detected by the physical
+layer for speeds above 10 Mb/s will cause the
+frame to fail the FCS check.
+
+For interfaces operating at 10 Gb/s, this
+counter can roll over in less than 5 minutes if
+
+
+
+it is incrementing at its maximum rate.  Since
+that amount of time could be less than a
+management station's poll cycle time, in order
+to avoid a loss of information, a management
+station is advised to poll the
+dot3HCStatsFCSErrors object for 10 Gb/s or
+faster interfaces.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.1.1.6,
+aFrameCheckSequenceErrors.""",
+        }, # column
+        "dot3StatsSingleCollisionFrames" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of frames that are involved in a single
+collision, and are subsequently transmitted
+successfully.
+
+A frame that is counted by an instance of this
+object is also counted by the corresponding
+instance of either the ifOutUcastPkts,
+ifOutMulticastPkts, or ifOutBroadcastPkts,
+and is not counted by the corresponding
+instance of the dot3StatsMultipleCollisionFrames
+object.
+
+This counter does not increment when the
+interface is operating in full-duplex mode.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.1.1.3,
+aSingleCollisionFrames.""",
+        }, # column
+        "dot3StatsMultipleCollisionFrames" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of frames that are involved in more
+
+
+
+than one collision and are subsequently
+transmitted successfully.
+
+A frame that is counted by an instance of this
+object is also counted by the corresponding
+instance of either the ifOutUcastPkts,
+ifOutMulticastPkts, or ifOutBroadcastPkts,
+and is not counted by the corresponding
+instance of the dot3StatsSingleCollisionFrames
+object.
+
+This counter does not increment when the
+interface is operating in full-duplex mode.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.1.1.4,
+aMultipleCollisionFrames.""",
+        }, # column
+        "dot3StatsSQETestErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.2.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of times that the SQE TEST ERROR
+is received on a particular interface. The
+SQE TEST ERROR is set in accordance with the
+rules for verification of the SQE detection
+mechanism in the PLS Carrier Sense Function as
+described in IEEE Std. 802.3, 2000 Edition,
+section 7.2.4.6.
+
+This counter does not increment on interfaces
+operating at speeds greater than 10 Mb/s, or on
+interfaces operating in full-duplex mode.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 7.2.4.6, also 30.3.2.1.4,
+aSQETestErrors.""",
+        }, # column
+        "dot3StatsDeferredTransmissions" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.2.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of frames for which the first
+transmission attempt on a particular interface
+is delayed because the medium is busy.
+
+The count represented by an instance of this
+object does not include frames involved in
+collisions.
+
+This counter does not increment when the
+interface is operating in full-duplex mode.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.1.1.9,
+aFramesWithDeferredXmissions.""",
+        }, # column
+        "dot3StatsLateCollisions" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.2.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times that a collision is
+detected on a particular interface later than
+one slotTime into the transmission of a packet.
+
+A (late) collision included in a count
+represented by an instance of this object is
+also considered as a (generic) collision for
+purposes of other collision-related
+statistics.
+
+This counter does not increment when the
+interface is operating in full-duplex mode.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.1.1.10,
+aLateCollisions.""",
+        }, # column
+        "dot3StatsExcessiveCollisions" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.2.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of frames for which transmission on a
+particular interface fails due to excessive
+collisions.
+
+This counter does not increment when the
+interface is operating in full-duplex mode.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.1.1.11,
+aFramesAbortedDueToXSColls.""",
+        }, # column
+        "dot3StatsInternalMacTransmitErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.2.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of frames for which transmission on a
+particular interface fails due to an internal
+MAC sublayer transmit error. A frame is only
+counted by an instance of this object if it is
+not counted by the corresponding instance of
+either the dot3StatsLateCollisions object, the
+dot3StatsExcessiveCollisions object, or the
+dot3StatsCarrierSenseErrors object.
+
+The precise meaning of the count represented by
+an instance of this object is implementation-
+specific.  In particular, an instance of this
+object may represent a count of transmission
+errors on a particular interface that are not
+otherwise counted.
+
+For interfaces operating at 10 Gb/s, this
+counter can roll over in less than 5 minutes if
+it is incrementing at its maximum rate.  Since
+that amount of time could be less than a
+management station's poll cycle time, in order
+to avoid a loss of information, a management
+station is advised to poll the
+dot3HCStatsInternalMacTransmitErrors object for
+10 Gb/s or faster interfaces.
+
+Discontinuities in the value of this counter can
+
+
+
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.1.1.12,
+aFramesLostDueToIntMACXmitError.""",
+        }, # column
+        "dot3StatsCarrierSenseErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.2.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times that the carrier sense
+condition was lost or never asserted when
+attempting to transmit a frame on a particular
+interface.
+
+The count represented by an instance of this
+object is incremented at most once per
+transmission attempt, even if the carrier sense
+condition fluctuates during a transmission
+attempt.
+
+This counter does not increment when the
+interface is operating in full-duplex mode.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.1.1.13,
+aCarrierSenseErrors.""",
+        }, # column
+        "dot3StatsFrameTooLongs" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.2.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of frames received on a particular
+interface that exceed the maximum permitted
+frame size.
+
+The count represented by an instance of this
+object is incremented when the frameTooLong
+status is returned by the MAC service to the
+LLC (or other MAC user). Received frames for
+which multiple error conditions pertain are,
+
+
+
+according to the conventions of IEEE 802.3
+Layer Management, counted exclusively according
+to the error status presented to the LLC.
+
+For interfaces operating at 10 Gb/s, this
+counter can roll over in less than 80 minutes if
+it is incrementing at its maximum rate.  Since
+that amount of time could be less than a
+management station's poll cycle time, in order
+to avoid a loss of information, a management
+station is advised to poll the
+dot3HCStatsFrameTooLongs object for 10 Gb/s
+or faster interfaces.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.1.1.25,
+aFrameTooLongErrors.""",
+        }, # column
+        "dot3StatsInternalMacReceiveErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.2.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of frames for which reception on a
+particular interface fails due to an internal
+MAC sublayer receive error. A frame is only
+counted by an instance of this object if it is
+not counted by the corresponding instance of
+either the dot3StatsFrameTooLongs object, the
+dot3StatsAlignmentErrors object, or the
+dot3StatsFCSErrors object.
+
+The precise meaning of the count represented by
+an instance of this object is implementation-
+specific.  In particular, an instance of this
+object may represent a count of receive errors
+on a particular interface that are not
+otherwise counted.
+
+For interfaces operating at 10 Gb/s, this
+counter can roll over in less than 5 minutes if
+
+
+
+it is incrementing at its maximum rate.  Since
+that amount of time could be less than a
+management station's poll cycle time, in order
+to avoid a loss of information, a management
+station is advised to poll the
+dot3HCStatsInternalMacReceiveErrors object for
+10 Gb/s or faster interfaces.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.1.1.15,
+aFramesLostDueToIntMACRcvError.""",
+        }, # column
+        "dot3StatsEtherChipSet" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.2.1.17",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "ObjectIdentifier"},
+            },
+            "access" : "readonly",
+            "description" :
+                """******** THIS OBJECT IS DEPRECATED ********
+
+This object contains an OBJECT IDENTIFIER
+which identifies the chipset used to
+realize the interface. Ethernet-like
+interfaces are typically built out of
+several different chips. The MIB implementor
+is presented with a decision of which chip
+to identify via this object. The implementor
+should identify the chip which is usually
+called the Medium Access Control chip.
+If no such chip is easily identifiable,
+the implementor should identify the chip
+which actually gathers the transmit
+and receive statistics and error
+indications. This would allow a
+manager station to correlate the
+statistics and the chip generating
+them, giving it the ability to take
+into account any known anomalies
+in the chip.
+
+This object has been deprecated.  Implementation
+feedback indicates that it is of limited use for
+debugging network problems in the field, and
+the administrative overhead involved in
+maintaining a registry of chipset OIDs is not
+justified.""",
+        }, # column
+        "dot3StatsSymbolErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.2.1.18",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """For an interface operating at 100 Mb/s, the
+number of times there was an invalid data symbol
+when a valid carrier was present.
+
+For an interface operating in half-duplex mode
+at 1000 Mb/s, the number of times the receiving
+media is non-idle (a carrier event) for a period
+of time equal to or greater than slotTime, and
+during which there was at least one occurrence
+of an event that causes the PHY to indicate
+'Data reception error' or 'carrier extend error'
+on the GMII.
+
+For an interface operating in full-duplex mode
+at 1000 Mb/s, the number of times the receiving
+media is non-idle (a carrier event) for a period
+of time equal to or greater than minFrameSize,
+and during which there was at least one
+occurrence of an event that causes the PHY to
+indicate 'Data reception error' on the GMII.
+
+For an interface operating at 10 Gb/s, the
+number of times the receiving media is non-idle
+(a carrier event) for a period of time equal to
+or greater than minFrameSize, and during which
+there was at least one occurrence of an event
+that causes the PHY to indicate 'Receive Error'
+on the XGMII.
+
+The count represented by an instance of this
+object is incremented at most once per carrier
+event, even if multiple symbol errors occur
+during the carrier event.  This count does
+not increment if a collision is present.
+
+This counter does not increment when the
+interface is operating at 10 Mb/s.
+
+For interfaces operating at 10 Gb/s, this
+counter can roll over in less than 5 minutes if
+it is incrementing at its maximum rate.  Since
+that amount of time could be less than a
+
+
+
+management station's poll cycle time, in order
+to avoid a loss of information, a management
+station is advised to poll the
+dot3HCStatsSymbolErrors object for 10 Gb/s
+or faster interfaces.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.2.1.5,
+aSymbolErrorDuringCarrier.""",
+        }, # column
+        "dot3StatsDuplexStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.2.1.19",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "unknown" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "halfDuplex" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "fullDuplex" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The current mode of operation of the MAC
+entity.  'unknown' indicates that the current
+duplex mode could not be determined.
+
+Management control of the duplex mode is
+accomplished through the MAU MIB.  When
+an interface does not support autonegotiation,
+or when autonegotiation is not enabled, the
+duplex mode is controlled using
+ifMauDefaultType.  When autonegotiation is
+supported and enabled, duplex mode is controlled
+using ifMauAutoNegAdvertisedBits.  In either
+case, the currently operating duplex mode is
+reflected both in this object and in ifMauType.
+
+Note that this object provides redundant
+information with ifMauType.  Normally, redundant
+objects are discouraged.  However, in this
+instance, it allows a management application to
+determine the duplex status of an interface
+without having to know every possible value of
+ifMauType.  This was felt to be sufficiently
+valuable to justify the redundancy.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.1.1.32,
+aDuplexStatus.""",
+        }, # column
+        "dot3StatsRateControlAbility" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.2.1.20",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readonly",
+            "description" :
+                """'true' for interfaces operating at speeds above
+1000 Mb/s that support Rate Control through
+lowering the average data rate of the MAC
+sublayer, with frame granularity, and 'false'
+otherwise.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.1.1.33,
+aRateControlAbility.""",
+        }, # column
+        "dot3StatsRateControlStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.2.1.21",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "rateControlOff" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "rateControlOn" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "unknown" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The current Rate Control mode of operation of
+the MAC sublayer of this interface.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.1.1.34,
+aRateControlStatus.""",
+        }, # column
+        "dot3CollTable" : {
+            "nodetype" : "table",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.5",
+            "status" : "current",
+            "description" :
+                """A collection of collision histograms for a
+particular set of interfaces.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.1.1.30,
+aCollisionFrames.""",
+        }, # table
+        "dot3CollEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.5.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "dot3CollCount",
+            ],
+            "description" :
+                """A cell in the histogram of per-frame
+collisions for a particular interface.  An
+
+
+
+instance of this object represents the
+frequency of individual MAC frames for which
+the transmission (successful or otherwise) on a
+particular interface is accompanied by a
+particular number of media collisions.""",
+        }, # row
+        "dot3CollCount" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.5.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "16"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "16"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """The number of per-frame media collisions for
+which a particular collision histogram cell
+represents the frequency on a particular
+interface.""",
+        }, # column
+        "dot3CollFrequencies" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.5.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of individual MAC frames for which the
+transmission (successful or otherwise) on a
+particular interface occurs after the
+frame has experienced exactly the number
+of collisions in the associated
+dot3CollCount object.
+
+For example, a frame which is transmitted
+on interface 77 after experiencing
+exactly 4 collisions would be indicated
+by incrementing only dot3CollFrequencies.77.4.
+No other instance of dot3CollFrequencies would
+be incremented in this example.
+
+This counter does not increment when the
+interface is operating in full-duplex mode.
+
+Discontinuities in the value of this counter can
+
+
+
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+        }, # column
+        "dot3Tests" : {
+            "nodetype" : "node",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.6",
+        }, # node
+        "dot3TestTdr" : {
+            "nodetype" : "node",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.6.1",
+            "status" : "deprecated",
+            "description" :
+                """******** THIS IDENTITY IS DEPRECATED *******
+
+The Time-Domain Reflectometry (TDR) test is
+specific to ethernet-like interfaces of type
+10Base5 and 10Base2.  The TDR value may be
+useful in determining the approximate distance
+to a cable fault.  It is advisable to repeat
+this test to check for a consistent resulting
+TDR value, to verify that there is a fault.
+
+A TDR test returns as its result the time
+interval, measured in 10 MHz ticks or 100 nsec
+units, between the start of TDR test
+transmission and the subsequent detection of a
+collision or deassertion of carrier.  On
+successful completion of a TDR test, the result
+is stored as the value of an appropriate
+instance of an appropriate vendor specific MIB
+object, and the OBJECT IDENTIFIER of that
+instance is stored in the appropriate instance
+of the appropriate test result code object
+(thereby indicating where the result has been
+stored).
+
+This object identity has been deprecated, since
+the ifTestTable in the IF-MIB was deprecated,
+and there is no longer a standard mechanism for
+initiating an interface test.  This left no
+standard way of using this object identity.""",
+        }, # node
+        "dot3TestLoopBack" : {
+            "nodetype" : "node",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.6.2",
+            "status" : "deprecated",
+            "description" :
+                """******** THIS IDENTITY IS DEPRECATED *******
+
+This test configures the MAC chip and executes
+an internal loopback test of memory, data paths,
+and the MAC chip logic.  This loopback test can
+only be executed if the interface is offline.
+Once the test has completed, the MAC chip should
+
+
+
+be reinitialized for network operation, but it
+should remain offline.
+
+If an error occurs during a test, the
+appropriate test result object will be set
+to indicate a failure.  The two OBJECT
+IDENTIFIER values dot3ErrorInitError and
+dot3ErrorLoopbackError may be used to provided
+more information as values for an appropriate
+test result code object.
+
+This object identity has been deprecated, since
+the ifTestTable in the IF-MIB was deprecated,
+and there is no longer a standard mechanism for
+initiating an interface test.  This left no
+standard way of using this object identity.""",
+        }, # node
+        "dot3Errors" : {
+            "nodetype" : "node",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.7",
+        }, # node
+        "dot3ErrorInitError" : {
+            "nodetype" : "node",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.7.1",
+            "status" : "deprecated",
+            "description" :
+                """******** THIS IDENTITY IS DEPRECATED *******
+
+Couldn't initialize MAC chip for test.
+
+This object identity has been deprecated, since
+the ifTestTable in the IF-MIB was deprecated,
+and there is no longer a standard mechanism for
+initiating an interface test.  This left no
+standard way of using this object identity.""",
+        }, # node
+        "dot3ErrorLoopbackError" : {
+            "nodetype" : "node",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.7.2",
+            "status" : "deprecated",
+            "description" :
+                """******** THIS IDENTITY IS DEPRECATED *******
+
+Expected data not received (or not received
+correctly) in loopback test.
+
+This object identity has been deprecated, since
+the ifTestTable in the IF-MIB was deprecated,
+and there is no longer a standard mechanism for
+initiating an interface test.  This left no
+standard way of using this object identity.""",
+        }, # node
+        "dot3ControlTable" : {
+            "nodetype" : "table",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.9",
+            "status" : "current",
+            "description" :
+                """A table of descriptive and status information
+about the MAC Control sublayer on the
+ethernet-like interfaces attached to a
+particular system.  There will be one row in
+this table for each ethernet-like interface in
+the system which implements the MAC Control
+sublayer.  If some, but not all, of the
+ethernet-like interfaces in the system implement
+the MAC Control sublayer, there will be fewer
+rows in this table than in the dot3StatsTable.""",
+        }, # table
+        "dot3ControlEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.9.1",
+            "status" : "current",
+            "linkage" : [
+                "dot3StatsIndex",
+            ],
+            "description" :
+                """An entry in the table, containing information
+about the MAC Control sublayer on a single
+ethernet-like interface.""",
+        }, # row
+        "dot3ControlFunctionsSupported" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.9.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Bits",
+                    "pause" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """A list of the possible MAC Control functions
+implemented for this interface.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.3.2,
+aMACControlFunctionsSupported.""",
+        }, # column
+        "dot3ControlInUnknownOpcodes" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.9.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of MAC Control frames received on this
+interface that contain an opcode that is not
+supported by this device.
+
+For interfaces operating at 10 Gb/s, this
+counter can roll over in less than 5 minutes if
+it is incrementing at its maximum rate.  Since
+that amount of time could be less than a
+management station's poll cycle time, in order
+to avoid a loss of information, a management
+station is advised to poll the
+dot3HCControlInUnknownOpcodes object for 10 Gb/s
+or faster interfaces.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.3.5,
+aUnsupportedOpcodesReceived""",
+        }, # column
+        "dot3HCControlInUnknownOpcodes" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.9.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of MAC Control frames received on this
+interface that contain an opcode that is not
+supported by this device.
+
+This counter is a 64 bit version of
+dot3ControlInUnknownOpcodes.  It should be used
+on interfaces operating at 10 Gb/s or faster.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.3.5,
+aUnsupportedOpcodesReceived""",
+        }, # column
+        "dot3PauseTable" : {
+            "nodetype" : "table",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.10",
+            "status" : "current",
+            "description" :
+                """A table of descriptive and status information
+about the MAC Control PAUSE function on the
+ethernet-like interfaces attached to a
+particular system. There will be one row in
+this table for each ethernet-like interface in
+the system which supports the MAC Control PAUSE
+function (i.e., the 'pause' bit in the
+corresponding instance of
+dot3ControlFunctionsSupported is set).  If some,
+but not all, of the ethernet-like interfaces in
+the system implement the MAC Control PAUSE
+function (for example, if some interfaces only
+support half-duplex), there will be fewer rows
+in this table than in the dot3StatsTable.""",
+        }, # table
+        "dot3PauseEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.10.1",
+            "status" : "current",
+            "linkage" : [
+                "dot3StatsIndex",
+            ],
+            "description" :
+                """An entry in the table, containing information
+about the MAC Control PAUSE function on a single
+ethernet-like interface.""",
+        }, # row
+        "dot3PauseAdminMode" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.10.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "disabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "enabledXmit" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "enabledRcv" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "enabledXmitAndRcv" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object is used to configure the default
+administrative PAUSE mode for this interface.
+
+This object represents the
+administratively-configured PAUSE mode for this
+interface.  If auto-negotiation is not enabled
+or is not implemented for the active MAU
+attached to this interface, the value of this
+object determines the operational PAUSE mode
+of the interface whenever it is operating in
+full-duplex mode.  In this case, a set to this
+object will force the interface into the
+specified mode.
+
+If auto-negotiation is implemented and enabled
+for the MAU attached to this interface, the
+PAUSE mode for this interface is determined by
+auto-negotiation, and the value of this object
+denotes the mode to which the interface will
+automatically revert if/when auto-negotiation is
+later disabled.  Note that when auto-negotiation
+is running, administrative control of the PAUSE
+mode may be accomplished using the
+ifMauAutoNegCapAdvertisedBits object in the
+MAU-MIB.
+
+Note that the value of this object is ignored
+when the interface is not operating in
+full-duplex mode.
+
+An attempt to set this object to
+'enabledXmit(2)' or 'enabledRcv(3)' will fail
+on interfaces that do not support operation
+at greater than 100 Mb/s.""",
+        }, # column
+        "dot3PauseOperMode" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.10.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "disabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "enabledXmit" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "enabledRcv" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "enabledXmitAndRcv" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object reflects the PAUSE mode currently
+
+
+
+in use on this interface, as determined by
+either (1) the result of the auto-negotiation
+function or (2) if auto-negotiation is not
+enabled or is not implemented for the active MAU
+attached to this interface, by the value of
+dot3PauseAdminMode.  Interfaces operating at
+100 Mb/s or less will never return
+'enabledXmit(2)' or 'enabledRcv(3)'.  Interfaces
+operating in half-duplex mode will always return
+'disabled(1)'.  Interfaces on which
+auto-negotiation is enabled but not yet
+completed should return the value
+'disabled(1)'.""",
+        }, # column
+        "dot3InPauseFrames" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.10.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of MAC Control frames received on this
+interface with an opcode indicating the PAUSE
+operation.
+
+This counter does not increment when the
+interface is operating in half-duplex mode.
+
+For interfaces operating at 10 Gb/s, this
+counter can roll over in less than 5 minutes if
+it is incrementing at its maximum rate.  Since
+that amount of time could be less than a
+management station's poll cycle time, in order
+to avoid a loss of information, a management
+station is advised to poll the
+dot3HCInPauseFrames object for 10 Gb/s or
+faster interfaces.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.4.3,
+aPAUSEMACCtrlFramesReceived.""",
+        }, # column
+        "dot3OutPauseFrames" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.10.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of MAC Control frames transmitted on
+this interface with an opcode indicating the
+PAUSE operation.
+
+This counter does not increment when the
+interface is operating in half-duplex mode.
+
+For interfaces operating at 10 Gb/s, this
+counter can roll over in less than 5 minutes if
+it is incrementing at its maximum rate.  Since
+that amount of time could be less than a
+management station's poll cycle time, in order
+to avoid a loss of information, a management
+station is advised to poll the
+dot3HCOutPauseFrames object for 10 Gb/s or
+faster interfaces.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.4.2,
+aPAUSEMACCtrlFramesTransmitted.""",
+        }, # column
+        "dot3HCInPauseFrames" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.10.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of MAC Control frames received on this
+interface with an opcode indicating the PAUSE
+operation.
+
+This counter does not increment when the
+interface is operating in half-duplex mode.
+
+This counter is a 64 bit version of
+dot3InPauseFrames.  It should be used on
+interfaces operating at 10 Gb/s or faster.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.4.3,
+aPAUSEMACCtrlFramesReceived.""",
+        }, # column
+        "dot3HCOutPauseFrames" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.10.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of MAC Control frames transmitted on
+this interface with an opcode indicating the
+PAUSE operation.
+
+This counter does not increment when the
+interface is operating in half-duplex mode.
+
+This counter is a 64 bit version of
+dot3OutPauseFrames.  It should be used on
+interfaces operating at 10 Gb/s or faster.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.4.2,
+aPAUSEMACCtrlFramesTransmitted.""",
+        }, # column
+        "dot3HCStatsTable" : {
+            "nodetype" : "table",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.11",
+            "status" : "current",
+            "description" :
+                """A table containing 64-bit versions of error
+counters from the dot3StatsTable.  The 32-bit
+versions of these counters may roll over quite
+quickly on higher speed ethernet interfaces.
+The counters that have 64-bit versions in this
+table are the counters that apply to full-duplex
+interfaces, since 10 Gb/s and faster
+ethernet-like interfaces do not support
+half-duplex, and very few 1000 Mb/s
+ethernet-like interfaces support half-duplex.
+
+Entries in this table are recommended for
+interfaces capable of operating at 1000 Mb/s or
+faster, and are required for interfaces capable
+of operating at 10 Gb/s or faster.  Lower speed
+ethernet-like interfaces do not need entries in
+this table, in which case there may be fewer
+entries in this table than in the
+dot3StatsTable. However, implementations
+containing interfaces with a mix of speeds may
+choose to implement entries in this table for
+
+
+
+all ethernet-like interfaces.""",
+        }, # table
+        "dot3HCStatsEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.11.1",
+            "status" : "current",
+            "linkage" : [
+                "dot3StatsIndex",
+            ],
+            "description" :
+                """An entry containing 64-bit statistics for a
+single ethernet-like interface.""",
+        }, # row
+        "dot3HCStatsAlignmentErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.11.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of frames received on a particular
+interface that are not an integral number of
+octets in length and do not pass the FCS check.
+
+The count represented by an instance of this
+object is incremented when the alignmentError
+status is returned by the MAC service to the
+LLC (or other MAC user). Received frames for
+which multiple error conditions pertain are,
+according to the conventions of IEEE 802.3
+Layer Management, counted exclusively according
+to the error status presented to the LLC.
+
+This counter does not increment for group
+encoding schemes greater than 4 bits per group.
+
+This counter is a 64 bit version of
+dot3StatsAlignmentErrors.  It should be used
+on interfaces operating at 10 Gb/s or faster.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+
+
+
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.1.1.7,
+aAlignmentErrors""",
+        }, # column
+        "dot3HCStatsFCSErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.11.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of frames received on a particular
+interface that are an integral number of octets
+in length but do not pass the FCS check.  This
+count does not include frames received with
+frame-too-long or frame-too-short error.
+
+The count represented by an instance of this
+object is incremented when the frameCheckError
+status is returned by the MAC service to the
+LLC (or other MAC user). Received frames for
+which multiple error conditions pertain are,
+according to the conventions of IEEE 802.3
+Layer Management, counted exclusively according
+to the error status presented to the LLC.
+
+Note:  Coding errors detected by the physical
+layer for speeds above 10 Mb/s will cause the
+frame to fail the FCS check.
+
+This counter is a 64 bit version of
+dot3StatsFCSErrors.  It should be used on
+interfaces operating at 10 Gb/s or faster.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.1.1.6,
+aFrameCheckSequenceErrors.""",
+        }, # column
+        "dot3HCStatsInternalMacTransmitErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.11.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of frames for which transmission on a
+particular interface fails due to an internal
+MAC sublayer transmit error. A frame is only
+
+
+
+counted by an instance of this object if it is
+not counted by the corresponding instance of
+either the dot3StatsLateCollisions object, the
+dot3StatsExcessiveCollisions object, or the
+dot3StatsCarrierSenseErrors object.
+
+The precise meaning of the count represented by
+an instance of this object is implementation-
+specific.  In particular, an instance of this
+object may represent a count of transmission
+errors on a particular interface that are not
+otherwise counted.
+
+This counter is a 64 bit version of
+dot3StatsInternalMacTransmitErrors.  It should
+be used on interfaces operating at 10 Gb/s or
+faster.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.1.1.12,
+aFramesLostDueToIntMACXmitError.""",
+        }, # column
+        "dot3HCStatsFrameTooLongs" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.11.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of frames received on a particular
+interface that exceed the maximum permitted
+frame size.
+
+The count represented by an instance of this
+object is incremented when the frameTooLong
+status is returned by the MAC service to the
+LLC (or other MAC user). Received frames for
+which multiple error conditions pertain are,
+according to the conventions of IEEE 802.3
+Layer Management, counted exclusively according
+to the error status presented to the LLC.
+
+This counter is a 64 bit version of
+dot3StatsFrameTooLongs.  It should be used on
+interfaces operating at 10 Gb/s or faster.
+
+Discontinuities in the value of this counter can
+
+
+
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.1.1.25,
+aFrameTooLongErrors.""",
+        }, # column
+        "dot3HCStatsInternalMacReceiveErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.11.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of frames for which reception on a
+particular interface fails due to an internal
+MAC sublayer receive error. A frame is only
+counted by an instance of this object if it is
+not counted by the corresponding instance of
+either the dot3StatsFrameTooLongs object, the
+dot3StatsAlignmentErrors object, or the
+dot3StatsFCSErrors object.
+
+The precise meaning of the count represented by
+an instance of this object is implementation-
+specific.  In particular, an instance of this
+object may represent a count of receive errors
+on a particular interface that are not
+otherwise counted.
+
+This counter is a 64 bit version of
+dot3StatsInternalMacReceiveErrors.  It should be
+used on interfaces operating at 10 Gb/s or
+faster.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.1.1.15,
+aFramesLostDueToIntMACRcvError.""",
+        }, # column
+        "dot3HCStatsSymbolErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.10.7.11.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """For an interface operating at 100 Mb/s, the
+number of times there was an invalid data symbol
+when a valid carrier was present.
+
+
+
+
+For an interface operating in half-duplex mode
+at 1000 Mb/s, the number of times the receiving
+media is non-idle (a carrier event) for a period
+of time equal to or greater than slotTime, and
+during which there was at least one occurrence
+of an event that causes the PHY to indicate
+'Data reception error' or 'carrier extend error'
+on the GMII.
+
+For an interface operating in full-duplex mode
+at 1000 Mb/s, the number of times the receiving
+media is non-idle (a carrier event) for a period
+of time equal to or greater than minFrameSize,
+and during which there was at least one
+occurrence of an event that causes the PHY to
+indicate 'Data reception error' on the GMII.
+
+For an interface operating at 10 Gb/s, the
+number of times the receiving media is non-idle
+(a carrier event) for a period of time equal to
+or greater than minFrameSize, and during which
+there was at least one occurrence of an event
+that causes the PHY to indicate 'Receive Error'
+on the XGMII.
+
+The count represented by an instance of this
+object is incremented at most once per carrier
+event, even if multiple symbol errors occur
+during the carrier event.  This count does
+not increment if a collision is present.
+
+This counter is a 64 bit version of
+dot3StatsSymbolErrors.  It should be used on
+interfaces operating at 10 Gb/s or faster.
+
+Discontinuities in the value of this counter can
+occur at re-initialization of the management
+system, and at other times as indicated by the
+value of ifCounterDiscontinuityTime.""",
+            "reference" :
+                """[IEEE 802.3 Std.], 30.3.2.1.5,
+aSymbolErrorDuringCarrier.""",
+        }, # column
+        "etherMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35",
+            "status" : "current",
+        }, # node
+        "etherMIBObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.1",
+        }, # node
+        "etherConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.2",
+        }, # node
+        "etherGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.2.1",
+        }, # node
+        "etherCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.2.2",
+        }, # node
+    }, # nodes
+
+    "groups" : {
+        "etherStatsGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.2.1.1",
+            "status" : "deprecated",
+            "members" : {
+                "dot3StatsIndex" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsAlignmentErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsFCSErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsSingleCollisionFrames" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsMultipleCollisionFrames" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsSQETestErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsDeferredTransmissions" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsLateCollisions" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsExcessiveCollisions" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsInternalMacTransmitErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsCarrierSenseErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsFrameTooLongs" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsInternalMacReceiveErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsEtherChipSet" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+            }, # members
+            "description" :
+                """********* THIS GROUP IS DEPRECATED **********
+
+A collection of objects providing information
+applicable to all ethernet-like network
+interfaces.
+
+This object group has been deprecated and
+replaced by etherStatsBaseGroup and
+etherStatsLowSpeedGroup.""",
+        }, # group
+        "etherCollisionTableGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.2.1.2",
+            "status" : "current",
+            "members" : {
+                "dot3CollFrequencies" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing a histogram
+of packets successfully transmitted after
+experiencing exactly N collisions.""",
+        }, # group
+        "etherStats100MbsGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.2.1.3",
+            "status" : "deprecated",
+            "members" : {
+                "dot3StatsIndex" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsAlignmentErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsFCSErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsSingleCollisionFrames" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsMultipleCollisionFrames" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsDeferredTransmissions" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsLateCollisions" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsExcessiveCollisions" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsInternalMacTransmitErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsCarrierSenseErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsFrameTooLongs" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsInternalMacReceiveErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsEtherChipSet" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsSymbolErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+            }, # members
+            "description" :
+                """********* THIS GROUP IS DEPRECATED **********
+
+A collection of objects providing information
+applicable to 100 Mb/sec ethernet-like network
+interfaces.
+
+This object group has been deprecated and
+replaced by etherStatsBaseGroup and
+etherStatsHighSpeedGroup.""",
+        }, # group
+        "etherStatsBaseGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.2.1.4",
+            "status" : "deprecated",
+            "members" : {
+                "dot3StatsIndex" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsAlignmentErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsFCSErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsSingleCollisionFrames" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsMultipleCollisionFrames" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsDeferredTransmissions" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsLateCollisions" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsExcessiveCollisions" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsInternalMacTransmitErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsCarrierSenseErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsFrameTooLongs" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsInternalMacReceiveErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+            }, # members
+            "description" :
+                """********* THIS GROUP IS DEPRECATED **********
+
+A collection of objects providing information
+applicable to all ethernet-like network
+interfaces.
+
+This object group has been deprecated and
+replaced by etherStatsBaseGroup2 and
+etherStatsHalfDuplexGroup, to separate
+objects which must be implemented by all
+ethernet-like network interfaces from
+objects that need only be implemented on
+ethernet-like network interfaces that are
+capable of half-duplex operation.""",
+        }, # group
+        "etherStatsLowSpeedGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.2.1.5",
+            "status" : "current",
+            "members" : {
+                "dot3StatsSQETestErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing information
+
+
+
+applicable to ethernet-like network interfaces
+capable of operating at 10 Mb/s or slower in
+half-duplex mode.""",
+        }, # group
+        "etherStatsHighSpeedGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.2.1.6",
+            "status" : "current",
+            "members" : {
+                "dot3StatsSymbolErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing information
+applicable to ethernet-like network interfaces
+capable of operating at 100 Mb/s or faster.""",
+        }, # group
+        "etherDuplexGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.2.1.7",
+            "status" : "current",
+            "members" : {
+                "dot3StatsDuplexStatus" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing information
+about the duplex mode of an ethernet-like
+network interface.""",
+        }, # group
+        "etherControlGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.2.1.8",
+            "status" : "current",
+            "members" : {
+                "dot3ControlFunctionsSupported" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3ControlInUnknownOpcodes" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing information
+about the MAC Control sublayer on ethernet-like
+network interfaces.""",
+        }, # group
+        "etherControlPauseGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.2.1.9",
+            "status" : "current",
+            "members" : {
+                "dot3PauseAdminMode" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3PauseOperMode" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3InPauseFrames" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3OutPauseFrames" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing information
+about and control of the MAC Control PAUSE
+function on ethernet-like network interfaces.""",
+        }, # group
+        "etherStatsBaseGroup2" : {
+            "nodetype" : "group",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.2.1.10",
+            "status" : "current",
+            "members" : {
+                "dot3StatsIndex" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsAlignmentErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsFCSErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsInternalMacTransmitErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsFrameTooLongs" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsInternalMacReceiveErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing information
+applicable to all ethernet-like network
+interfaces.""",
+        }, # group
+        "etherStatsHalfDuplexGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.2.1.11",
+            "status" : "current",
+            "members" : {
+                "dot3StatsSingleCollisionFrames" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsMultipleCollisionFrames" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsDeferredTransmissions" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsLateCollisions" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsExcessiveCollisions" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsCarrierSenseErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing information
+applicable only to half-duplex ethernet-like
+network interfaces.""",
+        }, # group
+        "etherHCStatsGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.2.1.12",
+            "status" : "current",
+            "members" : {
+                "dot3HCStatsAlignmentErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3HCStatsFCSErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3HCStatsInternalMacTransmitErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3HCStatsFrameTooLongs" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3HCStatsInternalMacReceiveErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3HCStatsSymbolErrors" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing high-capacity
+statistics applicable to higher-speed
+ethernet-like network interfaces.""",
+        }, # group
+        "etherHCControlGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.2.1.13",
+            "status" : "current",
+            "members" : {
+                "dot3HCControlInUnknownOpcodes" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing high-capacity
+statistics for the MAC Control sublayer on
+higher-speed ethernet-like network interfaces.""",
+        }, # group
+        "etherHCControlPauseGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.2.1.14",
+            "status" : "current",
+            "members" : {
+                "dot3HCInPauseFrames" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3HCOutPauseFrames" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing high-capacity
+statistics for the MAC Control PAUSE function on
+higher-speed ethernet-like network interfaces.""",
+        }, # group
+        "etherRateControlGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.2.1.15",
+            "status" : "current",
+            "members" : {
+                "dot3StatsRateControlAbility" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+                "dot3StatsRateControlStatus" : {
+                    "nodetype" : "member",
+                    "module" : "EtherLike-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing information
+about the Rate Control function on ethernet-like
+interfaces.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "etherCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.2.2.1",
+            "status" : "deprecated",
+            "description" :
+                """******** THIS COMPLIANCE IS DEPRECATED ********
+
+The compliance statement for managed network
+entities which have ethernet-like network
+interfaces.
+
+This compliance is deprecated and replaced by
+dot3Compliance.""",
+            "requires" : {
+                "etherStatsGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "EtherLike-MIB"
+                },
+                "etherCollisionTableGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EtherLike-MIB",
+                    "description" :
+                        """This group is optional. It is appropriate
+for all systems which have the necessary
+metering. Implementation in such systems is
+highly recommended.""",
+                },
+            }, # requires
+        }, # compliance
+        "ether100MbsCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.2.2.2",
+            "status" : "deprecated",
+            "description" :
+                """******** THIS COMPLIANCE IS DEPRECATED ********
+
+The compliance statement for managed network
+entities which have 100 Mb/sec ethernet-like
+network interfaces.
+
+This compliance is deprecated and replaced by
+dot3Compliance.""",
+            "requires" : {
+                "etherStats100MbsGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "EtherLike-MIB"
+                },
+                "etherCollisionTableGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EtherLike-MIB",
+                    "description" :
+                        """This group is optional. It is appropriate
+for all systems which have the necessary
+metering. Implementation in such systems is
+highly recommended.""",
+                },
+            }, # requires
+        }, # compliance
+        "dot3Compliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.2.2.3",
+            "status" : "deprecated",
+            "description" :
+                """******** THIS COMPLIANCE IS DEPRECATED ********
+
+The compliance statement for managed network
+entities which have ethernet-like network
+interfaces.
+
+This compliance is deprecated and replaced by
+dot3Compliance2.""",
+            "requires" : {
+                "etherStatsBaseGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "EtherLike-MIB"
+                },
+                "etherDuplexGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EtherLike-MIB",
+                    "description" :
+                        """This group is mandatory for all
+ethernet-like network interfaces which are
+capable of operating in full-duplex mode.
+It is highly recommended for all
+ethernet-like network interfaces.""",
+                },
+                "etherStatsLowSpeedGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EtherLike-MIB",
+                    "description" :
+                        """This group is mandatory for all
+ethernet-like network interfaces which are
+capable of operating at 10 Mb/s or slower in
+half-duplex mode.""",
+                },
+                "etherStatsHighSpeedGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EtherLike-MIB",
+                    "description" :
+                        """This group is mandatory for all
+ethernet-like network interfaces which are
+capable of operating at 100 Mb/s or faster.""",
+                },
+                "etherControlGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EtherLike-MIB",
+                    "description" :
+                        """This group is mandatory for all
+ethernet-like network interfaces that
+support the MAC Control sublayer.""",
+                },
+                "etherControlPauseGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EtherLike-MIB",
+                    "description" :
+                        """This group is mandatory for all
+ethernet-like network interfaces that
+support the MAC Control PAUSE function.""",
+                },
+                "etherCollisionTableGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EtherLike-MIB",
+                    "description" :
+                        """This group is optional. It is appropriate
+for all ethernet-like network interfaces
+which are capable of operating in
+half-duplex mode and have the necessary
+metering. Implementation in systems with
+
+
+
+such interfaces is highly recommended.""",
+                },
+            }, # requires
+        }, # compliance
+        "dot3Compliance2" : {
+            "nodetype" : "compliance",
+            "moduleName" : "EtherLike-MIB",
+            "oid" : "1.3.6.1.2.1.35.2.2.4",
+            "status" : "current",
+            "description" :
+                """The compliance statement for managed network
+entities which have ethernet-like network
+interfaces.
+
+Note that compliance with this MIB module
+requires compliance with the ifCompliance3
+MODULE-COMPLIANCE statement of the IF-MIB
+(RFC2863).  In addition, compliance with this
+MIB module requires compliance  with the
+mauModIfCompl3 MODULE-COMPLIANCE statement of
+the MAU-MIB (RFC3636).""",
+            "requires" : {
+                "etherStatsBaseGroup2" : {
+                    "nodetype" : "mandatory",
+                    "module" : "EtherLike-MIB"
+                },
+                "etherDuplexGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EtherLike-MIB",
+                    "description" :
+                        """This group is mandatory for all
+ethernet-like network interfaces which are
+capable of operating in full-duplex mode.
+It is highly recommended for all
+ethernet-like network interfaces.""",
+                },
+                "etherRateControlGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EtherLike-MIB",
+                    "description" :
+                        """This group is mandatory for all
+ethernet-like network interfaces which are
+capable of operating at speeds faster than
+1000 Mb/s. It is highly recommended for all
+ethernet-like network interfaces.""",
+                },
+                "etherStatsLowSpeedGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EtherLike-MIB",
+                    "description" :
+                        """This group is mandatory for all
+ethernet-like network interfaces which are
+capable of operating at 10 Mb/s or slower in
+half-duplex mode.""",
+                },
+                "etherStatsHighSpeedGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EtherLike-MIB",
+                    "description" :
+                        """This group is mandatory for all
+ethernet-like network interfaces which are
+capable of operating at 100 Mb/s or faster.""",
+                },
+                "etherStatsHalfDuplexGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EtherLike-MIB",
+                    "description" :
+                        """This group is mandatory for all
+ethernet-like network interfaces which are
+
+
+
+capable of operating in half-duplex mode.""",
+                },
+                "etherHCStatsGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EtherLike-MIB",
+                    "description" :
+                        """This group is mandatory for all
+ethernet-like network interfaces which are
+capable of operating at 10 Gb/s or faster.
+It is recommended for all ethernet-like
+network interfaces which are capable of
+operating at 1000 Mb/s or faster.""",
+                },
+                "etherControlGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EtherLike-MIB",
+                    "description" :
+                        """This group is mandatory for all
+ethernet-like network interfaces that
+support the MAC Control sublayer.""",
+                },
+                "etherHCControlGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EtherLike-MIB",
+                    "description" :
+                        """This group is mandatory for all
+ethernet-like network interfaces that
+support the MAC Control sublayer and are
+capable of operating at 10 Gb/s or faster.""",
+                },
+                "etherControlPauseGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EtherLike-MIB",
+                    "description" :
+                        """This group is mandatory for all
+ethernet-like network interfaces that
+support the MAC Control PAUSE function.""",
+                },
+                "etherHCControlPauseGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EtherLike-MIB",
+                    "description" :
+                        """This group is mandatory for all
+ethernet-like network interfaces that
+support the MAC Control PAUSE function and
+are capable of operating at 10 Gb/s or
+faster.""",
+                },
+                "etherCollisionTableGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "EtherLike-MIB",
+                    "description" :
+                        """This group is optional. It is appropriate
+for all ethernet-like network interfaces
+which are capable of operating in
+half-duplex mode and have the necessary
+metering. Implementation in systems with
+such interfaces is highly recommended.""",
+                },
+            }, # requires
+        }, # compliance
+    }, # compliances
+
+}