logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/ADSL2-LINE-TC-MIB.dic

@@ -0,0 +1,1462 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python ADSL2-LINE-TC-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/ADSL2-LINE-TC-MIB"
+
+MIB = {
+    "moduleName" : "ADSL2-LINE-TC-MIB",
+
+    "ADSL2-LINE-TC-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """ADSLMIB Working Group""",
+        "contact" : 
+            """WG-email:  adslmib@ietf.org
+Info:      https://www1.ietf.org/mailman/listinfo/adslmib
+
+          Chair:     Mike Sneed
+                     Sand Channel Systems
+          Postal:    P.O. Box 37324
+                     Raleigh NC 27627-732
+          Email:     sneedmike@hotmail.com
+          Phone:     +1 206 600 7022
+
+          Co-Chair & Co-editor:
+                     Menachem Dodge
+                     ECI Telecom Ltd.
+          Postal:    30 Hasivim St.
+                     Petach Tikva 49517,
+                     Israel.
+          Email:     mbdodge@ieee.org
+          Phone:     +972 3 926 8421
+
+
+
+
+
+
+          Co-editor: Moti Morgenstern
+                     ECI Telecom Ltd.
+          Postal:    30 Hasivim St.
+                     Petach Tikva 49517,
+                     Israel.
+          Email:     moti.morgenstern@ecitele.com
+          Phone:     +972 3 926 6258
+
+          Co-editor: Scott Baillie
+                     NEC Australia
+          Postal:    649-655 Springvale Road,
+                     Mulgrave, Victoria 3170,
+                     Australia.
+          Email:     scott.baillie@nec.com.au
+          Phone:     +61 3 9264 3986
+
+          Co-editor: Umberto Bonollo
+                     NEC Australia
+          Postal:    649-655 Springvale Road,
+                     Mulgrave, Victoria 3170,
+                     Australia.
+          Email:     umberto.bonollo@nec.com.au
+          Phone:     +61 3 9264 3385
+         """,
+        "description" :
+            """This MIB Module provides Textual Conventions to be
+used by the ADSL2-LINE-MIB module for the purpose of
+managing ADSL, ADSL2, and ADSL2+ lines.
+
+Copyright (C) The Internet Society (2006).  This version of
+this MIB module is part of RFC 4706: see the RFC itself for
+full legal notices.""",
+        "revisions" : (
+            {
+                "date" : "2006-10-04 00:00",
+                "description" :
+                    """Initial version, published as RFC 4706.""",
+            },
+        ),
+        "identity node" : "adsl2TCMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "transmission"},
+        {"module" : "SNMPv2-TC", "name" : "TEXTUAL-CONVENTION"},
+    ),
+
+    "typedefs" : {
+        "Adsl2Unit" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "atuc" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "atur" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "description" :
+                """Identifies a transceiver as being either an ATU-C or
+an ATU-R.  An ADSL line consists of two transceivers, an ATU-C
+and an ATU-R.  Attributes with this syntax reference the two
+sides of a line.  Specified as an INTEGER, the two values
+
+
+
+are:
+
+ atuc(1)  -- Central office ADSL terminal unit (ATU-C).
+ atur(2)  -- Remote ADSL terminal unit (ATU-R).""",
+        },
+        "Adsl2Direction" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "upstream" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "downstream" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "description" :
+                """Identifies the direction of a band as being
+either upstream or downstream.  Specified as an INTEGER,
+the two values are:
+ upstream(1), and
+ downstream(2).""",
+        },
+        "Adsl2TransmissionModeType" : {
+            "basetype" : "Bits",
+            "status" : "current",
+            "ansit1413" : {
+                "nodetype" : "namednumber",
+                "number" : "0"
+            },
+            "etsi" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "g9921PotsNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "g9921PotsOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "g9921IsdnNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "g9921isdnOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "5"
+            },
+            "g9921tcmIsdnNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "6"
+            },
+            "g9921tcmIsdnOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "7"
+            },
+            "g9922potsNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "8"
+            },
+            "g9922potsOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "9"
+            },
+            "g9922tcmIsdnNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "10"
+            },
+            "g9922tcmIsdnOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "11"
+            },
+            "g9921tcmIsdnSymmetric" : {
+                "nodetype" : "namednumber",
+                "number" : "12"
+            },
+            "reserved1" : {
+                "nodetype" : "namednumber",
+                "number" : "13"
+            },
+            "reserved2" : {
+                "nodetype" : "namednumber",
+                "number" : "14"
+            },
+            "reserved3" : {
+                "nodetype" : "namednumber",
+                "number" : "15"
+            },
+            "reserved4" : {
+                "nodetype" : "namednumber",
+                "number" : "16"
+            },
+            "reserved5" : {
+                "nodetype" : "namednumber",
+                "number" : "17"
+            },
+            "g9923PotsNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "18"
+            },
+            "g9923PotsOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "19"
+            },
+            "g9923IsdnNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "20"
+            },
+            "g9923isdnOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "21"
+            },
+            "reserved6" : {
+                "nodetype" : "namednumber",
+                "number" : "22"
+            },
+            "reserved7" : {
+                "nodetype" : "namednumber",
+                "number" : "23"
+            },
+            "g9924potsNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "24"
+            },
+            "g9924potsOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "25"
+            },
+            "reserved8" : {
+                "nodetype" : "namednumber",
+                "number" : "26"
+            },
+            "reserved9" : {
+                "nodetype" : "namednumber",
+                "number" : "27"
+            },
+            "g9923AnnexIAllDigNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "28"
+            },
+            "g9923AnnexIAllDigOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "29"
+            },
+            "g9923AnnexJAllDigNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "30"
+            },
+            "g9923AnnexJAllDigOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "31"
+            },
+            "g9924AnnexIAllDigNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "32"
+            },
+            "g9924AnnexIAllDigOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "33"
+            },
+            "g9923AnnexLMode1NonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "34"
+            },
+            "g9923AnnexLMode2NonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "35"
+            },
+            "g9923AnnexLMode3Overlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "36"
+            },
+            "g9923AnnexLMode4Overlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "37"
+            },
+            "g9923AnnexMPotsNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "38"
+            },
+            "g9923AnnexMPotsOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "39"
+            },
+            "g9925PotsNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "40"
+            },
+            "g9925PotsOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "41"
+            },
+            "g9925IsdnNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "42"
+            },
+            "g9925isdnOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "43"
+            },
+            "reserved10" : {
+                "nodetype" : "namednumber",
+                "number" : "44"
+            },
+            "reserved11" : {
+                "nodetype" : "namednumber",
+                "number" : "45"
+            },
+            "g9925AnnexIAllDigNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "46"
+            },
+            "g9925AnnexIAllDigOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "47"
+            },
+            "g9925AnnexJAllDigNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "48"
+            },
+            "g9925AnnexJAllDigOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "49"
+            },
+            "g9925AnnexMPotsNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "50"
+            },
+            "g9925AnnexMPotsOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "51"
+            },
+            "reserved12" : {
+                "nodetype" : "namednumber",
+                "number" : "52"
+            },
+            "reserved13" : {
+                "nodetype" : "namednumber",
+                "number" : "53"
+            },
+            "reserved14" : {
+                "nodetype" : "namednumber",
+                "number" : "54"
+            },
+            "reserved15" : {
+                "nodetype" : "namednumber",
+                "number" : "55"
+            },
+            "description" :
+                """A set of ADSL2 line transmission modes, with one bit
+per mode.  The notes (F) and (L) denote Full-Rate
+and Lite/splitterless, respectively:
+   Bit 00 : Regional Std. (ANSI T1.413) (F)
+   Bit 01 : Regional Std. (ETSI DTS/TM06006) (F)
+   Bit 02 : G.992.1 POTS non-overlapped (F)
+   Bit 03 : G.992.1 POTS overlapped (F)
+   Bit 04 : G.992.1 ISDN non-overlapped (F)
+   Bit 05 : G.992.1 ISDN overlapped (F)
+   Bit 06 : G.992.1 TCM-ISDN non-overlapped (F)
+   Bit 07 : G.992.1 TCM-ISDN overlapped (F)
+   Bit 08 : G.992.2 POTS non-overlapped (L)
+   Bit 09 : G.992.2 POTS overlapped (L)
+   Bit 10 : G.992.2 with TCM-ISDN non-overlapped (L)
+   Bit 11 : G.992.2 with TCM-ISDN overlapped (L)
+   Bit 12 : G.992.1 TCM-ISDN symmetric (F) -- not in G.997.1
+   Bit 13-17: Reserved
+   Bit 18 : G.992.3 POTS non-overlapped (F)
+   Bit 19 : G.992.3 POTS overlapped (F)
+   Bit 20 : G.992.3 ISDN non-overlapped (F)
+   Bit 21 : G.992.3 ISDN overlapped (F)
+
+
+
+   Bit 22-23: Reserved
+   Bit 24 : G.992.4 POTS non-overlapped (L)
+   Bit 25 : G.992.4 POTS overlapped (L)
+   Bit 26-27: Reserved
+   Bit 28 : G.992.3 Annex I All-Digital non-overlapped (F)
+   Bit 29 : G.992.3 Annex I All-Digital overlapped (F)
+   Bit 30 : G.992.3 Annex J All-Digital non-overlapped (F)
+   Bit 31 : G.992.3 Annex J All-Digital overlapped (F)
+   Bit 32 : G.992.4 Annex I All-Digital non-overlapped (L)
+   Bit 33 : G.992.4 Annex I All-Digital overlapped (L)
+   Bit 34 : G.992.3 Annex L POTS non-overlapped, mode 1,
+                            wide U/S (F)
+   Bit 35 : G.992.3 Annex L POTS non-overlapped, mode 2,
+                            narrow U/S(F)
+   Bit 36 : G.992.3 Annex L POTS overlapped, mode 3,
+                            wide U/S (F)
+   Bit 37 : G.992.3 Annex L POTS overlapped, mode 4,
+                            narrow U/S (F)
+   Bit 38 : G.992.3 Annex M POTS non-overlapped (F)
+   Bit 39 : G.992.3 Annex M POTS overlapped (F)
+   Bit 40 : G.992.5 POTS non-overlapped (F)
+   Bit 41 : G.992.5 POTS overlapped (F)
+   Bit 42 : G.992.5 ISDN non-overlapped (F)
+   Bit 43 : G.992.5 ISDN overlapped (F)
+   Bit 44-45: Reserved
+   Bit 46 : G.992.5 Annex I All-Digital non-overlapped (F)
+   Bit 47 : G.992.5 Annex I All-Digital overlapped (F)
+   Bit 48 : G.992.5 Annex J All-Digital non-overlapped (F)
+   Bit 49 : G.992.5 Annex J All-Digital overlapped (F)
+   Bit 50 : G.992.5 Annex M POTS non-overlapped (F)
+   Bit 51 : G.992.5 Annex M POTS overlapped (F)
+   Bit 52-55: Reserved""",
+        },
+        "Adsl2RaMode" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "manual" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "raInit" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "dynamicRa" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "description" :
+                """Specifies the rate adaptation behavior for the line.
+The three possible behaviors are:
+
+
+
+ manual(1)    - No Rate-Adaptation.  The initialization
+                process attempts to synchronize to a
+                specified rate.
+ raInit(2)    - Rate-Adaptation during initialization process
+                only, which attempts to synchronize to a rate
+                between minimum and maximum specified values.
+ dynamicRa(3) - Dynamic Rate-Adaptation during initialization
+                process as well as during SHOWTIME.""",
+        },
+        "Adsl2InitResult" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "noFail" : {
+                "nodetype" : "namednumber",
+                "number" : "0"
+            },
+            "configError" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "configNotFeasible" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "commFail" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "noPeerAtu" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "otherCause" : {
+                "nodetype" : "namednumber",
+                "number" : "5"
+            },
+            "description" :
+                """Specifies the result of a full initialization attempt; the
+six possible result values are:
+ noFail(0)            - Successful initialization.
+ configError(1)       - Configuration failure.
+ configNotFeasible(2) - Configuration details not supported.
+ commFail(3)          - Communication failure.
+ noPeerAtu(4)         - Peer ATU not detected.
+ otherCause(5)        - Other initialization failure reason.
+
+The values used are as defined in ITU-T G.997.1,
+paragraph 7.5.1.3""",
+        },
+        "Adsl2OperationModes" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "defMode" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "adsl" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "g9923PotsNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "8"
+            },
+            "g9923PotsOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "9"
+            },
+            "g9923IsdnNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "10"
+            },
+            "g9923isdnOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "11"
+            },
+            "g9924potsNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "14"
+            },
+            "g9924potsOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "15"
+            },
+            "g9923AnnexIAllDigNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "18"
+            },
+            "g9923AnnexIAllDigOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "19"
+            },
+            "g9923AnnexJAllDigNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "20"
+            },
+            "g9923AnnexJAllDigOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "21"
+            },
+            "g9924AnnexIAllDigNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "22"
+            },
+            "g9924AnnexIAllDigOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "23"
+            },
+            "g9923AnnexLMode1NonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "24"
+            },
+            "g9923AnnexLMode2NonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "25"
+            },
+            "g9923AnnexLMode3Overlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "26"
+            },
+            "g9923AnnexLMode4Overlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "27"
+            },
+            "g9923AnnexMPotsNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "28"
+            },
+            "g9923AnnexMPotsOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "29"
+            },
+            "g9925PotsNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "30"
+            },
+            "g9925PotsOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "31"
+            },
+            "g9925IsdnNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "32"
+            },
+            "g9925isdnOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "33"
+            },
+            "g9925AnnexIAllDigNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "36"
+            },
+            "g9925AnnexIAllDigOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "37"
+            },
+            "g9925AnnexJAllDigNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "38"
+            },
+            "g9925AnnexJAllDigOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "39"
+            },
+            "g9925AnnexMPotsNonOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "40"
+            },
+            "g9925AnnexMPotsOverlapped" : {
+                "nodetype" : "namednumber",
+                "number" : "41"
+            },
+            "description" :
+                """The ADSL2 management model specified includes an ADSL Mode
+attribute that identifies an instance of ADSL Mode-Specific
+PSD Configuration object in the ADSL Line Profile.  The
+following classes of ADSL operating mode are defined.
+The notes (F) and (L) denote Full-Rate and Lite/splitterless
+respectively:
+
+
+
+
++-------+--------------------------------------------------+
+| Value |         ADSL operation mode description          |
++-------+--------------------------------------------------+
+
+    1   - The default/generic PSD configuration.  Default
+          configuration will be used when no other matching
+          mode-specific configuration can be found.
+    2   - ADSL family.  The attributes included in the Mode-
+          Specific PSD Configuration are irrelevant for
+          ITU-T G.992.1 and G.992.2 ADSL modes.  Hence, it
+          is possible to map those modes to this generic
+          class.
+   3-7  - Unused. Reserved for future ITU-T specification.
+    8   - G.992.3 POTS non-overlapped (F)
+    9   - G.992.3 POTS overlapped (F)
+   10   - G.992.3 ISDN non-overlapped (F)
+   11   - G.992.3 ISDN overlapped (F)
+ 12-13  - Unused. Reserved for future ITU-T specification.
+   14   - G.992.4 POTS non-overlapped (L)
+   15   - G.992.4 POTS overlapped (L)
+ 16-17  - Unused. Reserved for future ITU-T specification.
+   18   - G.992.3 Annex I All-Digital non-overlapped (F)
+   19   - G.992.3 Annex I All-Digital overlapped (F)
+   20   - G.992.3 Annex J All-Digital non-overlapped (F)
+   21   - G.992.3 Annex J All-Digital overlapped (F)
+   22   - G.992.4 Annex I All-Digital non-overlapped (L)
+   23   - G.992.4 Annex I All-Digital overlapped (L)
+   24   - G.992.3 Annex L POTS non-overlapped, mode 1,
+          wide U/S (F)
+   25   - G.992.3 Annex L POTS non-overlapped, mode 2,
+          narrow U/S(F)
+   26   - G.992.3 Annex L POTS overlapped, mode 3,
+          wide U/S (F)
+   27   - G.992.3 Annex L POTS overlapped, mode 4,
+          narrow U/S (F)
+   28   - G.992.3 Annex M POTS non-overlapped (F)
+   29   - G.992.3 Annex M POTS overlapped (F)
+   30   - G.992.5 POTS non-overlapped (F)
+   31   - G.992.5 POTS overlapped (F)
+   32   - G.992.5 ISDN non-overlapped (F)
+   33   - G.992.5 ISDN overlapped (F)
+ 34-35  - Unused. Reserved for future ITU-T specification.
+   36   - G.992.5 Annex I All-Digital non-overlapped (F)
+   37   - G.992.5 Annex I All-Digital overlapped (F)
+   38   - G.992.5 Annex J All-Digital non-overlapped (F)
+   39   - G.992.5 Annex J All-Digital overlapped (F)
+   40   - G.992.5 Annex M POTS non-overlapped (F)
+   41   - G.992.5 Annex M POTS overlapped (F)""",
+        },
+        "Adsl2PowerMngState" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "l0" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "l1" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "l2" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "l3" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "description" :
+                """Attributes with this syntax uniquely identify each power
+management state defined for the ADSL/ADSL2 or ADSL2+ link.
+The possible values are:
+  l0(1) - L0 - Full power management state.
+  l1(2) - L1 - Low power management state (for G.992.2).
+  l2(3) - L2 - Low power management state (for G.992.3,
+               G.992.4, and G.992.5).
+  l3(4) - L3 - Idle power management state.""",
+        },
+        "Adsl2ConfPmsForce" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "l3toL0" : {
+                "nodetype" : "namednumber",
+                "number" : "0"
+            },
+            "l0toL2" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "l0orL2toL3" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "description" :
+                """Attributes with this syntax are configuration parameters
+that reference the desired power management state for the
+ADSL/ADSL2 or ADSL2+ link:
+  l3toL0(0)          - Perform a transition from L3 to L0
+                       (Full power management state).
+  l0toL2(2)          - Perform a transition from L0 to L2
+                       (Low power management state).
+  l0orL2toL3(3)      - Perform a transition into L3 (Idle
+                       power management state).
+
+The values used are as defined in ITU-T G.997.1,
+paragraph 7.3.1.1.3""",
+        },
+        "Adsl2LConfProfPmMode" : {
+            "basetype" : "Bits",
+            "status" : "current",
+            "allowTransitionsToIdle" : {
+                "nodetype" : "namednumber",
+                "number" : "0"
+            },
+            "allowTransitionsToLowPower" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "description" :
+                """Attributes with this syntax are configuration parameters
+that reference the power modes/states into which the ATU-C or
+ATU-R may autonomously transit.
+
+It is a BITS structure that allows control of the following
+transit options:
+ allowTransitionsToIdle(0)     - XTU may autonomously transit
+                                 to idle (L3) state.
+ allowTransitionsToLowPower(1) - XTU may autonomously transit
+                                 to low-power (L2) state.""",
+        },
+        "Adsl2LineLdsf" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "inhibit" : {
+                "nodetype" : "namednumber",
+                "number" : "0"
+            },
+            "force" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "description" :
+                """Attributes with this syntax are configuration parameters
+that control the Loop Diagnostic mode for the ADSL/ADSL2 or
+ADSL2+ link.  The possible values are:
+  inhibit(0)  - Inhibit Loop Diagnostic mode.
+  force(1)    - Force/Initiate Loop Diagnostic mode.
+
+The values used are as defined in ITU-T G.997.1,
+paragraph 7.3.1.1.8""",
+        },
+        "Adsl2LdsfResult" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "none" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "success" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "inProgress" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "unsupported" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "cannotRun" : {
+                "nodetype" : "namednumber",
+                "number" : "5"
+            },
+            "aborted" : {
+                "nodetype" : "namednumber",
+                "number" : "6"
+            },
+            "failed" : {
+                "nodetype" : "namednumber",
+                "number" : "7"
+            },
+            "illegalMode" : {
+                "nodetype" : "namednumber",
+                "number" : "8"
+            },
+            "adminUp" : {
+                "nodetype" : "namednumber",
+                "number" : "9"
+            },
+            "tableFull" : {
+                "nodetype" : "namednumber",
+                "number" : "10"
+            },
+            "noResources" : {
+                "nodetype" : "namednumber",
+                "number" : "11"
+            },
+            "description" :
+                """Possible failure reasons associated with performing
+a Dual Ended Loop Test (DELT) on a DSL line.
+Possible values are:
+ none(1)         - The default value in case LDSF was never
+                   requested for the associated line.
+ success(2)      - The recent command completed
+                   successfully.
+ inProgress(3)   - The Loop Diagnostics process is in
+                   progress.
+ unsupported(4)  - The NE or the line card doesn't support
+                   LDSF.
+ cannotRun(5)    - The NE cannot initiate the command, due
+                   to a nonspecific reason.
+ aborted(6)      - The Loop Diagnostics process aborted.
+ failed(7)       - The Loop Diagnostics process failed.
+ illegalMode(8)  - The NE cannot initiate the command, due
+                   to the specific mode of the relevant
+                   line.
+ adminUp(9)      - The NE cannot initiate the command, as
+                   the relevant line is administratively
+                   'Up'.
+ tableFull(10)   - The NE cannot initiate the command, due
+                   to reaching the maximum number of rows
+                   in the results table.
+ noResources(11) - The NE cannot initiate the command, due
+                   to lack of internal memory resources.""",
+        },
+        "Adsl2SymbolProtection" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "noProtection" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "halfSymbol" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "singleSymbol" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "twoSymbols" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "threeSymbols" : {
+                "nodetype" : "namednumber",
+                "number" : "5"
+            },
+            "fourSymbols" : {
+                "nodetype" : "namednumber",
+                "number" : "6"
+            },
+            "fiveSymbols" : {
+                "nodetype" : "namednumber",
+                "number" : "7"
+            },
+            "sixSymbols" : {
+                "nodetype" : "namednumber",
+                "number" : "8"
+            },
+            "sevenSymbols" : {
+                "nodetype" : "namednumber",
+                "number" : "9"
+            },
+            "eightSymbols" : {
+                "nodetype" : "namednumber",
+                "number" : "10"
+            },
+            "nineSymbols" : {
+                "nodetype" : "namednumber",
+                "number" : "11"
+            },
+            "tenSymbols" : {
+                "nodetype" : "namednumber",
+                "number" : "12"
+            },
+            "elevenSymbols" : {
+                "nodetype" : "namednumber",
+                "number" : "13"
+            },
+            "twelveSymbols" : {
+                "nodetype" : "namednumber",
+                "number" : "14"
+            },
+            "thirteeSymbols" : {
+                "nodetype" : "namednumber",
+                "number" : "15"
+            },
+            "fourteenSymbols" : {
+                "nodetype" : "namednumber",
+                "number" : "16"
+            },
+            "fifteenSymbols" : {
+                "nodetype" : "namednumber",
+                "number" : "17"
+            },
+            "sixteenSymbols" : {
+                "nodetype" : "namednumber",
+                "number" : "18"
+            },
+            "description" :
+                """Attributes with this syntax are configuration parameters
+that reference the minimum-length impulse noise protection
+(INP) in terms of number of symbols.  The possible values are:
+noProtection (i.e., INP not required), halfSymbol (i.e., INP
+length is 1/2 symbol), and 1-16 symbols in steps of 1 symbol.""",
+        },
+        "Adsl2MaxBer" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "eminus3" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "eminus5" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "eminus7" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "description" :
+                """Attributes with this syntax are configuration parameters
+that reference the maximum Bit Error Rate (BER).
+The possible values are:
+
+  eminus3(1)   - Maximum BER=E^-3
+
+
+
+  eminus5(2)   - Maximum BER=E^-5
+  eminus7(3)   - Maximum BER=E^-7""",
+        },
+        "Adsl2ScMaskDs" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "64"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "64"
+            },
+            "description" :
+                """Each one of the 512 bits in this OCTET
+STRING array represents the corresponding bin
+in the downstream direction.  A value of one
+indicates that the bin is not in use.""",
+        },
+        "Adsl2ScMaskUs" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "8"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "8"
+            },
+            "description" :
+                """Each one of the 64 bits in this OCTET
+STRING array represents the corresponding bin
+in the upstream direction.  A value of one
+indicates that the bin is not in use.""",
+        },
+        "Adsl2RfiDs" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "64"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "64"
+            },
+            "description" :
+                """Each one of the 512 bits in this OCTET
+STRING array represents the corresponding bin
+in the downstream direction.  A value of one
+indicates that the bin is part of a notch
+filter.""",
+        },
+        "Adsl2PsdMaskDs" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "96"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "96"
+            },
+            "description" :
+                """This is a structure that represents up to
+32 PSD Mask breakpoints.
+Each breakpoint occupies 3 octets: The first
+two octets hold the index of the sub-carrier
+associated with the breakpoint.  The third octet
+holds the PSD reduction at the breakpoint from 0
+(0 dBm/Hz) to 255 (-127.5 dBm/Hz) using units of
+0.5 dBm/Hz.""",
+        },
+        "Adsl2PsdMaskUs" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "12"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "12"
+            },
+            "description" :
+                """This is a structure that represents up to
+4 PSD Mask breakpoints.
+Each breakpoint occupies 3 octets: The first
+two octets hold the index of the sub-carrier
+associated with the breakpoint.  The third octet
+holds the PSD reduction at the breakpoint from 0
+(0 dBm/Hz) to 255 (-127.5 dBm/Hz) using units of
+0.5 dBm/Hz.""",
+        },
+        "Adsl2Tssi" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "96"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "96"
+            },
+            "description" :
+                """This is a structure that represents up to
+32 transmit spectrum shaping (TSSi) breakpoints.
+Each breakpoint occupies 3 octets: The first
+two octets hold the index of the sub-carrier
+associated with the breakpoint.  The third octet
+holds the shaping parameter at the breakpoint.  It
+is a value from 0 to 127 (units of -0.5 dB).  The
+special value 127 indicates that the sub-carrier
+is not transmitted.""",
+        },
+        "Adsl2LastTransmittedState" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "atucG9941" : {
+                "nodetype" : "namednumber",
+                "number" : "0"
+            },
+            "atucQuiet1" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "atucComb1" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "atucQuiet2" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "atucComb2" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "atucIcomb1" : {
+                "nodetype" : "namednumber",
+                "number" : "5"
+            },
+            "atucLineprob" : {
+                "nodetype" : "namednumber",
+                "number" : "6"
+            },
+            "atucQuiet3" : {
+                "nodetype" : "namednumber",
+                "number" : "7"
+            },
+            "atucComb3" : {
+                "nodetype" : "namednumber",
+                "number" : "8"
+            },
+            "atucIComb2" : {
+                "nodetype" : "namednumber",
+                "number" : "9"
+            },
+            "atucMsgfmt" : {
+                "nodetype" : "namednumber",
+                "number" : "10"
+            },
+            "atucMsgpcb" : {
+                "nodetype" : "namednumber",
+                "number" : "11"
+            },
+            "atucQuiet4" : {
+                "nodetype" : "namednumber",
+                "number" : "12"
+            },
+            "atucReverb1" : {
+                "nodetype" : "namednumber",
+                "number" : "13"
+            },
+            "atucTref1" : {
+                "nodetype" : "namednumber",
+                "number" : "14"
+            },
+            "atucReverb2" : {
+                "nodetype" : "namednumber",
+                "number" : "15"
+            },
+            "atucEct" : {
+                "nodetype" : "namednumber",
+                "number" : "16"
+            },
+            "atucReverb3" : {
+                "nodetype" : "namednumber",
+                "number" : "17"
+            },
+            "atucTref2" : {
+                "nodetype" : "namednumber",
+                "number" : "18"
+            },
+            "atucReverb4" : {
+                "nodetype" : "namednumber",
+                "number" : "19"
+            },
+            "atucSegue1" : {
+                "nodetype" : "namednumber",
+                "number" : "20"
+            },
+            "atucMsg1" : {
+                "nodetype" : "namednumber",
+                "number" : "21"
+            },
+            "atucReverb5" : {
+                "nodetype" : "namednumber",
+                "number" : "22"
+            },
+            "atucSegue2" : {
+                "nodetype" : "namednumber",
+                "number" : "23"
+            },
+            "atucMedley" : {
+                "nodetype" : "namednumber",
+                "number" : "24"
+            },
+            "atucExchmarker" : {
+                "nodetype" : "namednumber",
+                "number" : "25"
+            },
+            "atucMsg2" : {
+                "nodetype" : "namednumber",
+                "number" : "26"
+            },
+            "atucReverb6" : {
+                "nodetype" : "namednumber",
+                "number" : "27"
+            },
+            "atucSegue3" : {
+                "nodetype" : "namednumber",
+                "number" : "28"
+            },
+            "atucParams" : {
+                "nodetype" : "namednumber",
+                "number" : "29"
+            },
+            "atucReverb7" : {
+                "nodetype" : "namednumber",
+                "number" : "30"
+            },
+            "atucSegue4" : {
+                "nodetype" : "namednumber",
+                "number" : "31"
+            },
+            "atucShowtime" : {
+                "nodetype" : "namednumber",
+                "number" : "32"
+            },
+            "aturG9941" : {
+                "nodetype" : "namednumber",
+                "number" : "100"
+            },
+            "aturQuiet1" : {
+                "nodetype" : "namednumber",
+                "number" : "101"
+            },
+            "aturComb1" : {
+                "nodetype" : "namednumber",
+                "number" : "102"
+            },
+            "aturQuiet2" : {
+                "nodetype" : "namednumber",
+                "number" : "103"
+            },
+            "aturComb2" : {
+                "nodetype" : "namednumber",
+                "number" : "104"
+            },
+            "aturIcomb1" : {
+                "nodetype" : "namednumber",
+                "number" : "105"
+            },
+            "aturLineprob" : {
+                "nodetype" : "namednumber",
+                "number" : "106"
+            },
+            "aturQuiet3" : {
+                "nodetype" : "namednumber",
+                "number" : "107"
+            },
+            "aturComb3" : {
+                "nodetype" : "namednumber",
+                "number" : "108"
+            },
+            "aturIcomb2" : {
+                "nodetype" : "namednumber",
+                "number" : "109"
+            },
+            "aturMsgfmt" : {
+                "nodetype" : "namednumber",
+                "number" : "110"
+            },
+            "aturMsgpcb" : {
+                "nodetype" : "namednumber",
+                "number" : "111"
+            },
+            "aturReverb1" : {
+                "nodetype" : "namednumber",
+                "number" : "112"
+            },
+            "aturQuiet4" : {
+                "nodetype" : "namednumber",
+                "number" : "113"
+            },
+            "aturReverb2" : {
+                "nodetype" : "namednumber",
+                "number" : "114"
+            },
+            "aturQuiet5" : {
+                "nodetype" : "namednumber",
+                "number" : "115"
+            },
+            "aturReverb3" : {
+                "nodetype" : "namednumber",
+                "number" : "116"
+            },
+            "aturEct" : {
+                "nodetype" : "namednumber",
+                "number" : "117"
+            },
+            "aturReverb4" : {
+                "nodetype" : "namednumber",
+                "number" : "118"
+            },
+            "aturSegue1" : {
+                "nodetype" : "namednumber",
+                "number" : "119"
+            },
+            "aturReverb5" : {
+                "nodetype" : "namednumber",
+                "number" : "120"
+            },
+            "aturSegue2" : {
+                "nodetype" : "namednumber",
+                "number" : "121"
+            },
+            "aturMsg1" : {
+                "nodetype" : "namednumber",
+                "number" : "122"
+            },
+            "aturMedley" : {
+                "nodetype" : "namednumber",
+                "number" : "123"
+            },
+            "aturExchmarker" : {
+                "nodetype" : "namednumber",
+                "number" : "124"
+            },
+            "aturMsg2" : {
+                "nodetype" : "namednumber",
+                "number" : "125"
+            },
+            "aturReverb6" : {
+                "nodetype" : "namednumber",
+                "number" : "126"
+            },
+            "aturSegue3" : {
+                "nodetype" : "namednumber",
+                "number" : "127"
+            },
+            "aturParams" : {
+                "nodetype" : "namednumber",
+                "number" : "128"
+            },
+            "aturReverb7" : {
+                "nodetype" : "namednumber",
+                "number" : "129"
+            },
+            "aturSegue4" : {
+                "nodetype" : "namednumber",
+                "number" : "130"
+            },
+            "aturShowtime" : {
+                "nodetype" : "namednumber",
+                "number" : "131"
+            },
+            "description" :
+                """This parameter represents the last successfully
+transmitted initialization state in the last full
+initialization performed on the line.  States are
+per the specific xDSL technology and are numbered
+from 0 (if G.994.1 is used) or 1 (if G.994.1 is
+not used) up to Showtime.""",
+        },
+        "Adsl2LineStatus" : {
+            "basetype" : "Bits",
+            "status" : "current",
+            "noDefect" : {
+                "nodetype" : "namednumber",
+                "number" : "0"
+            },
+            "lossOfFrame" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "lossOfSignal" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "lossOfPower" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "initFailure" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "description" :
+                """Attributes with this syntax are status parameters
+that reflect the failure status for a given endpoint of
+ADSL/ADSL2 or ADSL2+ link.
+
+This BITS structure can report the following failures:
+
+ noDefect(0)       - This bit position positively reports
+                     that no defect or failure exists.
+ lossOfFrame(1)    - Loss of frame synchronization.
+ lossOfSignal(2)   - Loss of signal.
+ lossOfPower(3)    - Loss of power.  Usually this failure may
+                     be reported for ATU-Rs only.
+ initFailure(4)    - Recent initialization process failed.
+                     Never active on ATU-R.""",
+        },
+        "Adsl2ChAtmStatus" : {
+            "basetype" : "Bits",
+            "status" : "current",
+            "noDefect" : {
+                "nodetype" : "namednumber",
+                "number" : "0"
+            },
+            "noCellDelineation" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "lossOfCellDelineation" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "description" :
+                """Attributes with this syntax are status parameters that
+reflect the failure status for Transmission Convergence (TC)
+layer of a given ATM interface (data path over an ADSL/ADSL2
+or ADSL2+ link).
+
+This BITS structure can report the following failures:
+ noDefect(0)              - This bit position positively
+                            reports that no defect or failure
+                            exists.
+ noCellDelineation(1)     - The link was successfully
+
+
+
+                            initialized, but cell delineation
+                            was never acquired on the
+                            associated ATM data path.
+ lossOfCellDelineation(2) - Loss of cell delineation on the
+                            associated ATM data path.""",
+        },
+        "Adsl2ChPtmStatus" : {
+            "basetype" : "Bits",
+            "status" : "current",
+            "noDefect" : {
+                "nodetype" : "namednumber",
+                "number" : "0"
+            },
+            "outOfSync" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "description" :
+                """Attributes with this syntax are status parameters that
+reflect the failure status for a given PTM interface (packet
+data path over an ADSL/ADSL2 or ADSL2+ link).
+
+This BITS structure can report the following failures:
+    noDefect(0)     - This bit position positively
+                      reports that no defect or failure exists.
+    outOfSync(1)    - Out of synchronization.""",
+        },
+    }, # typedefs
+
+    "nodes" : {
+        "adsl2TCMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "ADSL2-LINE-TC-MIB",
+            "oid" : "1.3.6.1.2.1.10.238.2",
+            "status" : "current",
+        }, # node
+    }, # nodes
+
+}