logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/DOT3-EPON-MIB.dic

@@ -0,0 +1,3297 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python DOT3-EPON-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/DOT3-EPON-MIB"
+
+MIB = {
+    "moduleName" : "DOT3-EPON-MIB",
+
+    "DOT3-EPON-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF Ethernet Interfaces and Hub MIB Working
+Group""",
+        "contact" : 
+            """WG charter:
+http://www.ietf.org/html.charters/hubmib-charter.html
+    Mailing Lists:
+      General Discussion: hubmib@ietf.org
+      To Subscribe: hubmib-request@ietf.org
+
+
+
+      In Body: subscribe your_email_address
+      Chair: Bert Wijnen
+      Postal: Lucent Technologies
+              Schagen 33
+              3461 GL Linschoten
+              Netherlands
+      Tel: +31-348-407-775
+      E-mail: bwijnen@lucent.com
+
+      Editor: Lior Khermosh
+      Postal: PMC-SIERRA
+              Kohav Hertzelia bldg,
+              4 Hasadnaot St.
+              Hertzliya Pituach 46120,
+              ISRAEL
+              P.O.Box 2089 Hertzliya Pituach 46120 Israel
+      Tel: +972-9-9628000 Ext: 302
+      E-mail: lior_khermosh@pmc-sierra.com""",
+        "description" :
+            """The objects in this MIB module are used to manage the
+Ethernet in the First Mile (EFM) Ethernet Passive Optical
+Network (EPON) Interfaces as defined in IEEE P802.3ah
+clauses 60, 64, and 65.
+The following reference is used throughout this MIB module:
+[802.3ah] refers to:
+Information technology - Telecommunications and
+information exchange between systems - Local and
+metropolitan area networks - Specific requirements -
+Part 3: Carrier sense multiple access with collision
+detection (CSMA/CD) access method and physical layer
+specifications - Media Access Control Parameters,
+Physical Layers and Management Parameters for subscriber
+access networks.  IEEE Std 802.3ah-2004, October 2004.
+
+Of particular interest are clause 64 (Multi-Point Control
+Protocol - MPCP), clause 65 (Point-to-Multipoint
+Reconciliation Sublayer - P2MP RS), clause 60 (Ethernet
+Passive Optical Network Physical Medium Dependent - EPON
+PMDs), clause 30, 'Management', and clause 45, 'Management
+Data Input/Output (MDIO) Interface'.
+
+Copyright (C) The IETF Trust (2007).  This version
+of this MIB module is part of 4837; see the RFC itself for
+full legal notices.
+
+Key abbreviations:
+BER - Bit Error Rate
+BW - bandwidth
+
+
+
+CRC - Cyclic Redundancy Check
+EFM - Ethernet First Mile
+EPON - Ethernet Passive Optical Network
+FEC  - Forward Error Correction
+LLID - Logical Link Identifier
+MAC - Media Access Control
+Mbps - Megabit per second
+MDIO - Management Data Input/Output
+MPCP - Multi-Point Control Protocol
+OLT - Optical Line Terminal (Server unit of the EPON)
+OMP - Optical Multi-Point
+ONU - Optical Network Unit (Client unit of the EPON)
+P2MP - Point-to-Multipoint
+PHY - Physical Layer
+PMD - Physical Medium Dependent
+PON - Passive Optical Network
+RTT - Round Trip Time
+SLD - Start of LLID Delimiter
+TQ - Time Quanta""",
+        "revisions" : (
+            {
+                "date" : "2007-03-29 00:00",
+                "description" :
+                    """Initial version, published as RFC 4837.""",
+            },
+        ),
+        "identity node" : "dot3EponMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "mib-2"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter32"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "SNMPv2-SMI", "name" : "Unsigned32"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter64"},
+        {"module" : "SNMPv2-TC", "name" : "TruthValue"},
+        {"module" : "SNMPv2-TC", "name" : "MacAddress"},
+        {"module" : "IF-MIB", "name" : "ifIndex"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+    ),
+
+    "nodes" : {
+        "dot3EponMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155",
+            "status" : "current",
+        }, # node
+        "dot3EponObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1",
+        }, # node
+        "dot3EponMpcpObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1",
+        }, # node
+        "dot3MpcpControlTable" : {
+            "nodetype" : "table",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.1",
+            "status" : "current",
+            "description" :
+                """A Table of dot3 Multi-Point Control Protocol (MPCP)
+MIB objects.  The entries in the table are control and
+status objects of the MPCP.
+Each object has a row for every virtual link denoted by
+the corresponding ifIndex.
+The LLID field, as defined in the [802.3ah], is a 2-byte
+register (15-bit field and a broadcast bit) limiting the
+number of virtual links to 32768.  Typically the number
+
+
+
+of expected virtual links in a PON is like the number of
+ONUs, which is 32-64, plus an additional entry for
+broadcast LLID (with a value of 0xffff).""",
+        }, # table
+        "dot3MpcpControlEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.1.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+            ],
+            "description" :
+                """An entry in the dot3 MPCP Control table.
+Rows exist for an OLT interface and an ONU interface.
+A row in the table is denoted by the ifIndex of the link
+and it is created when the ifIndex is created.
+The rows in the table for an ONU interface are created
+at system initialization.
+The row in the table corresponding to the OLT ifIndex
+and the row corresponding to the broadcast virtual link
+are created at system initialization.
+A row in the table corresponding to the ifIndex of a
+virtual links is created when a virtual link is
+established (ONU registers) and deleted when the virtual
+link is deleted (ONU deregisters).""",
+        }, # row
+        "dot3MpcpOperStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object reflects the operational state of the
+Multi-Point MAC Control sublayer as defined in
+
+
+
+[802.3ah], clause 64.  When the value is true(1), the
+interface will act as if the Multi-Point Control Protocol
+is enabled.  When the value is false(2), the interface
+will act as if the Multi-Point Control Protocol is
+disabled.  The operational state can be changed using the
+dot3MpcpAdminState object.
+This object is applicable for an OLT, with the same
+value for all virtual interfaces, and for an ONU.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.2.""",
+        }, # column
+        "dot3MpcpAdminState" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "default" : "false",
+            "description" :
+                """This object is used to define the admin state of the
+Multi-Point MAC Control sublayer, as defined in
+[802.3ah], clause 64, and to reflect its state.
+When selecting the value as true(1), the Multi-Point
+Control Protocol of the interface is enabled.
+When selecting the value as false(2), the Multi-Point
+Control Protocol of the interface is disabled.
+This object reflects the administrative state of the
+Multi-Point Control Protocol of the interface.
+The write operation is not restricted in this document
+and can be done at any time.  Changing
+dot3MpcpAdminState state can lead to disabling the
+Multi-Point Control Protocol on the respective interface,
+leading to the interruption of service for the users
+connected to the respective EPON interface.
+This object is applicable for an OLT, with the same
+value for all virtual interfaces, and for an ONU.""",
+            "reference" :
+                """[802.3ah], 30.3.5.2.1.""",
+        }, # column
+        "dot3MpcpMode" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "olt" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "onu" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "default" : "olt",
+            "description" :
+                """This object is used to identify the operational
+state of the Multi-Point MAC Control sublayer as
+defined in [802.3ah], clause 64.  Reading olt(1) for an
+
+
+
+OLT (server) mode and onu(2) for an ONU (client) mode.
+This object is used to identify the operational mode
+for the MPCP tables.
+This object is applicable for an OLT, with the same
+value for all virtual interfaces, and for an ONU.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.3.""",
+        }, # column
+        "dot3MpcpSyncTime" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "TQ (16nsec)",
+            "description" :
+                """An object that reports the 'sync lock time' of the
+OLT receiver in increments of Time Quanta (TQ)-16ns
+as defined in [802.3ah], clauses 60, 64, and 65.  The
+value returned shall be (sync lock time ns)/16.  If
+this value exceeds (2^32-1), the value (2^32-1) shall
+be returned.  This object is applicable for an OLT,
+with the same value for all virtual interfaces, and
+for an ONU.""",
+            "reference" :
+                """[802.3ah], 64.3.3.2.""",
+        }, # column
+        "dot3MpcpLinkID" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """An object that identifies the Logical Link
+Identifier (LLID) associated with the MAC of the virtual
+link as specified in [802.3ah], clause 65.1.3.2.2.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+The ONU and the corresponding virtual MAC of the OLT,
+for the same virtual link, have the same value.
+Value is assigned when the ONU registers.
+Value is freed when the ONU deregisters.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.4.""",
+        }, # column
+        "dot3MpcpRemoteMACAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "MacAddress"},
+            },
+            "access" : "readonly",
+            "description" :
+                """An object that identifies the source_address
+parameter of the last MPCPDUs passed to the MAC Control.
+This value is updated on reception of a valid frame with
+1) a destination Field equal to the reserved multicast
+address for MAC Control as specified in [802.3], Annex
+31A; 2) the lengthOrType field value equal to the reserved
+Type for MAC Control as specified in [802.3], Annex
+31A; 3) an MPCP subtype value equal to the subtype
+reserved for MPCP as specified in [802.3ah], Annex 31A.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+The value reflects the MAC address of the remote entity
+and therefore the OLT holds a value for each LLID, which
+is the MAC address of the ONU; the ONU has a single
+value that is the OLT MAC address.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.5.""",
+        }, # column
+        "dot3MpcpRegistrationState" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "unregistered" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "registering" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "registered" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """An object that identifies the registration state
+of the Multi-Point MAC Control sublayer as defined in
+[802.3ah], clause 64.  When this object has the
+enumeration unregistered(1), the interface is
+unregistered and may be used for registering a link
+partner.  When this object has the enumeration
+registering(2), the interface is in the process of
+registering a link-partner.  When this object has the
+enumeration registered(3), the interface has an
+established link-partner.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.6.""",
+        }, # column
+        "dot3MpcpTransmitElapsed" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "TQ (16nsec)",
+            "description" :
+                """An object that reports the interval from the last
+MPCP frame transmission in increments of Time Quanta
+(TQ)-16ns.  The value returned shall be (interval from
+last MPCP frame transmission in ns)/16.  If this value
+exceeds (2^32-1), the value (2^32-1) shall be returned.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.19.""",
+        }, # column
+        "dot3MpcpReceiveElapsed" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.1.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "TQ (16nsec)",
+            "description" :
+                """An object that reports the interval from last MPCP frame
+reception in increments of Time Quanta (TQ)-16ns.  The
+value returned shall be (interval from last MPCP frame
+reception in ns)/16.  If this value exceeds (2^32-1), the
+value (2^32-1) shall be returned.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.20.""",
+        }, # column
+        "dot3MpcpRoundTripTime" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.1.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "TQ (16nsec)",
+            "description" :
+                """An object that reports the MPCP round trip time in
+increments of Time Quanta (TQ)-16ns.  The value returned
+shall be (round trip time in ns)/16.  If this value
+exceeds (2^16-1), the value (2^16-1) shall be returned.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.21.""",
+        }, # column
+        "dot3MpcpMaximumPendingGrants" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.1.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """An object that reports the maximum number of grants
+that an ONU can store for handling.  The maximum number
+
+
+
+of grants that an ONU can store for handling has a
+range of 0 to 255.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+At the OLT, the value should be zero.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.24.""",
+        }, # column
+        "dot3MpcpStatTable" : {
+            "nodetype" : "table",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.2",
+            "status" : "current",
+            "description" :
+                """This table defines the list of statistics counters of
+an interface implementing the [802.3ah], clause 64 MPCP.
+Each object has a row for every virtual link denoted by
+the corresponding ifIndex.
+The LLID field, as defined in the [802.3ah], is a 2-byte
+register (15-bit field and a broadcast bit) limiting the
+number of virtual links to 32768.  Typically the number
+of expected virtual links in a PON is like the number of
+ONUs, which is 32-64, plus an additional entry for
+broadcast LLID (with a value of 0xffff).""",
+        }, # table
+        "dot3MpcpStatEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.2.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+            ],
+            "description" :
+                """An entry in the table of statistics counters of the
+[802.3ah], clause 64, MPCP interface.
+Rows exist for an OLT interface and an ONU interface.
+A row in the table is denoted by the ifIndex of the link
+and it is created when the ifIndex is created.
+The rows in the table for an ONU interface are created
+at system initialization.
+The row in the table corresponding to the OLT ifIndex
+and the row corresponding to the broadcast virtual link
+are created at system initialization.
+A row in the table corresponding to the ifIndex of a
+virtual link is created when a virtual link is
+established (ONU registers) and deleted when the virtual
+link is deleted (ONU deregisters).""",
+        }, # row
+        "dot3MpcpMACCtrlFramesTransmitted" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of MPCP frames passed to the MAC sublayer for
+transmission.  This counter is incremented when a
+MA_CONTROL.request service primitive is generated within
+the MAC control sublayer with an opcode indicating an
+MPCP frame.
+This object is applicable for an OLT and an ONU.  At the
+OLT it has a distinct value for each virtual interface.
+Discontinuities of this counter can occur at
+re-initialization of the management system, and at other
+times as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.7.""",
+        }, # column
+        "dot3MpcpMACCtrlFramesReceived" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of MPCP frames passed by the MAC sublayer to the
+MAC Control sublayer.  This counter is incremented when a
+ReceiveFrame function call returns a valid frame with
+1) a lengthOrType field value equal to the reserved
+
+
+
+Type for 802.3_MAC_Control as specified in clause 31.4.1.3,
+and
+2) an opcode indicating an MPCP frame.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.8.""",
+        }, # column
+        "dot3MpcpDiscoveryWindowsSent" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of discovery windows generated.  The counter is
+incremented by one for each generated discovery window.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+At the ONU, the value should be zero.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.22.""",
+        }, # column
+        "dot3MpcpDiscoveryTimeout" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of the number of times a discovery timeout
+occurs.  Increment the counter by one for each discovery
+processing state-machine reset resulting from timeout
+waiting for message arrival.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.23.""",
+        }, # column
+        "dot3MpcpTxRegRequest" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of the number of times a REGISTER_REQ MPCP
+frame transmission occurs.  Increment the counter by one
+for each REGISTER_REQ MPCP frame transmitted as defined
+in [802.3ah], clause 64.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+At the OLT, the value should be zero.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.12.""",
+        }, # column
+        "dot3MpcpRxRegRequest" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.2.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of the number of times a REGISTER_REQ MPCP
+frame reception occurs.
+Increment the counter by one for each REGISTER_REQ MPCP
+frame received as defined in [802.3ah], clause 64.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+At the ONU, the value should be zero.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.17.""",
+        }, # column
+        "dot3MpcpTxRegAck" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.2.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of the number of times a REGISTER_ACK MPCP
+frame transmission occurs.  Increment the counter by one
+for each REGISTER_ACK MPCP frame transmitted as defined
+in [802.3ah], clause 64.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+At the OLT, the value should be zero.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.10.""",
+        }, # column
+        "dot3MpcpRxRegAck" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.2.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of the number of times a REGISTER_ACK MPCP
+frame reception occurs.
+Increment the counter by one for each REGISTER_ACK MPCP
+frame received as defined in [802.3ah], clause 64.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+At the ONU, the value should be zero.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.15.""",
+        }, # column
+        "dot3MpcpTxReport" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.2.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of the number of times a REPORT MPCP frame
+transmission occurs.  Increment the counter by one for
+each REPORT MPCP frame transmitted as defined in
+[802.3ah], clause 64.
+
+
+
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+At the OLT, the value should be zero.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.13.""",
+        }, # column
+        "dot3MpcpRxReport" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.2.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of the number of times a REPORT MPCP frame
+reception occurs.
+Increment the counter by one for each REPORT MPCP frame
+received as defined in [802.3ah], clause 64.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+At the ONU, the value should be zero.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.18.""",
+        }, # column
+        "dot3MpcpTxGate" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.2.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of the number of times a GATE MPCP frame
+transmission occurs.
+Increment the counter by one for each GATE MPCP frame
+transmitted as defined in [802.3ah], clause 64.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+At the ONU, the value should be zero.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+
+
+
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.9.""",
+        }, # column
+        "dot3MpcpRxGate" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.2.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of the number of times a GATE MPCP frame
+reception occurs.
+Increment the counter by one for each GATE MPCP frame
+received as defined in [802.3ah], clause 64.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+At the OLT, the value should be zero.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.14.""",
+        }, # column
+        "dot3MpcpTxRegister" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.2.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of the number of times a REGISTER MPCP frame
+transmission occurs.
+Increment the counter by one for each REGISTER MPCP
+frame transmitted as defined in [802.3ah], clause 64.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+At the ONU, the value should be zero.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.11.""",
+        }, # column
+        "dot3MpcpRxRegister" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.1.2.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of the number of times a REGISTER MPCP frame
+reception occurs.
+Increment the counter by one for each REGISTER MPCP
+frame received as defined in [802.3ah], clause 64.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+At the OLT, the value should be zero.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+            "reference" :
+                """[802.3ah], 30.3.5.1.16.""",
+        }, # column
+        "dot3OmpEmulationObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.2",
+        }, # node
+        "dot3OmpEmulationTable" : {
+            "nodetype" : "table",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.2.1",
+            "status" : "current",
+            "description" :
+                """A table of dot3 OmpEmulation MIB objects.  The table
+contain objects for the management of the OMPEmulation
+sublayer.
+Each object has a row for every virtual link denoted by
+the corresponding ifIndex.
+The LLID field, as defined in the [802.3ah], is a 2-byte
+register (15-bit field and a broadcast bit) limiting the
+number of virtual links to 32768.  Typically the number
+of expected virtual links in a PON is like the number of
+ONUs, which is 32-64, plus an additional entry for
+broadcast LLID (with a value of 0xffff).""",
+        }, # table
+        "dot3OmpEmulationEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.2.1.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+            ],
+            "description" :
+                """An entry in the dot3 OmpEmulation table.
+Rows exist for an OLT interface and an ONU interface.
+A row in the table is denoted by the ifIndex of the link
+and it is created when the ifIndex is created.
+The rows in the table for an ONU interface are created
+at system initialization.
+The row in the table corresponding to the OLT ifIndex
+and the row corresponding to the broadcast virtual link
+are created at system initialization.
+A row in the table corresponding to the ifIndex of a
+virtual links is created when a virtual link is
+established (ONU registers) and deleted when the virtual
+link is deleted (ONU deregisters).""",
+        }, # row
+        "dot3OmpEmulationType" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.2.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "unknown" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "olt" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "onu" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """An object that indicates the mode of operation
+of the Reconciliation Sublayer for Point-to-Point
+Emulation (see [802.3ah], clause 65.1).  unknown(1) value
+is assigned in initialization; true state or type is not
+yet known.  olt(2) value is assigned when the sublayer is
+operating in OLT mode.  onu(3) value is assigned when the
+sublayer is operating in ONU mode.
+This object is applicable for an OLT, with the same
+value for all virtual interfaces, and for an ONU.""",
+            "reference" :
+                """[802.3ah], 30.3.7.1.2.""",
+        }, # column
+        "dot3OmpEmulationStatTable" : {
+            "nodetype" : "table",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.2.2",
+            "status" : "current",
+            "description" :
+                """This table defines the list of statistics counters of
+
+
+
+[802.3ah], clause 65, OMPEmulation sublayer.
+Each object has a row for every virtual link denoted by
+the corresponding ifIndex.
+The LLID field, as defined in the [802.3ah], is a 2-byte
+register (15-bit field and a broadcast bit) limiting the
+number of virtual links to 32768.  Typically the number
+of expected virtual links in a PON is like the number of
+ONUs, which is 32-64, plus an additional entry for
+broadcast LLID (with a value of 0xffff).""",
+        }, # table
+        "dot3OmpEmulationStatEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.2.2.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+            ],
+            "description" :
+                """An entry in the table of statistics counters of
+[802.3ah], clause 65, OMPEmulation sublayer.
+Rows exist for an OLT interface and an ONU interface.
+A row in the table is denoted by the ifIndex of the link
+and it is created when the ifIndex is created.
+The rows in the table for an ONU interface are created
+at system initialization.
+The row in the table corresponding to the OLT ifIndex
+and the row corresponding to the broadcast virtual link
+are created at system initialization.
+A row in the table corresponding to the ifIndex of a
+virtual links is created when a virtual link is
+established (ONU registers) and deleted when the virtual
+link is deleted (ONU deregisters).""",
+        }, # row
+        "dot3OmpEmulationSLDErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.2.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of frames received that do not contain a valid
+SLD field as defined in [802.3ah], clause 65.1.3.3.1.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+            "reference" :
+                """[802.3ah], 30.3.7.1.3.""",
+        }, # column
+        "dot3OmpEmulationCRC8Errors" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.2.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of frames received that contain a valid SLD
+field, as defined in [802.3ah], clause 65.1.3.3.1, but do
+not pass the CRC-8 check as defined in [802.3ah], clause
+65.1.3.3.3.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+            "reference" :
+                """[802.3ah], 30.3.7.1.4.""",
+        }, # column
+        "dot3OmpEmulationBadLLID" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.2.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of frames received that contain a valid SLD
+field, as defined in [802.3ah], clause 65.1.3.3.1, and
+pass the CRC-8 check, as defined in [802.3ah], clause
+65.1.3.3.3, but are discarded due to the LLID check as
+defined in [802.3ah], clause 65.1.3.3.2.
+
+
+
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+            "reference" :
+                """[802.3ah], 30.3.7.1.8.""",
+        }, # column
+        "dot3OmpEmulationGoodLLID" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.2.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of frames received that contain a valid SLD
+field, as defined in [802.3ah], clause 65.1.3.3.1, and
+pass the CRC-8 check as defined in [802.3ah], clause
+65.1.3.3.3.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+            "reference" :
+                """[802.3ah], 30.3.7.1.5.""",
+        }, # column
+        "dot3OmpEmulationOnuPonCastLLID" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.2.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of frames received that contain a valid SLD
+field, as defined in [802.3ah], clause 65.1.3.3.1,
+pass the CRC-8 check, as defined in [802.3ah], clause
+65.1.3.3.3, and meet the rules of acceptance for an
+ONU defined in [802.3ah], clause 65.1.3.3.2.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+At the OLT, the value should be zero.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+
+
+
+module.""",
+            "reference" :
+                """[802.3ah], 30.3.7.1.6.""",
+        }, # column
+        "dot3OmpEmulationOltPonCastLLID" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.2.2.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of frames received that contain a valid SLD
+field, as defined in [802.3ah], clause 65.1.3.3.1,
+pass the CRC-8 check, as defined in [802.3ah], clause
+65.1.3.3.3, and meet the rules of acceptance for an
+OLT defined in [802.3ah], 65.1.3.3.2.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+At the ONU, the value should be zero.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+            "reference" :
+                """[802.3ah], 30.3.7.1.7.""",
+        }, # column
+        "dot3OmpEmulationBroadcastBitNotOnuLlid" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.2.2.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of frames received that contain a valid SLD
+field, as defined in [802.3ah], clause
+65.1.3.3.1, pass the CRC-8 check, as defined in
+[802.3ah], clause 65.1.3.3.3, and contain the broadcast
+bit in the LLID and not the ONU's LLID (frame accepted)
+as defined in [802.3ah], clause 65.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+At the OLT, the value should be zero.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+        }, # column
+        "dot3OmpEmulationOnuLLIDNotBroadcast" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.2.2.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of frames received that contain a valid SLD
+field, as defined in [802.3ah], clause
+65.1.3.3.1, pass the CRC-8 check, as defined in
+[802.3ah], clause 65.1.3.3.3, and contain the ONU's LLID
+as defined in [802.3ah], clause 65.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+At the OLT, the value should be zero.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+        }, # column
+        "dot3OmpEmulationBroadcastBitPlusOnuLlid" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.2.2.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of frames received that contain a valid SLD
+field, as defined in [802.3ah], clause
+65.1.3.3.1, pass the CRC-8 check, as defined in
+[802.3ah], clause 65.1.3.3.3, and contain the broadcast
+bit in the LLID and match the ONU's LLID (frame
+reflected) as defined in [802.3ah], clause 65.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+At the OLT, the value should be zero.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+        }, # column
+        "dot3OmpEmulationNotBroadcastBitNotOnuLlid" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.2.2.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of frames received that contain a valid SLD
+field, as defined in [802.3ah], clause
+65.1.3.3.1, pass the CRC-8 check, as defined in
+[802.3ah], clause 65.1.3.3.3, and do not contain
+the ONU's LLID as defined in [802.3ah], clause 65.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+At the OLT, the value should be zero.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+        }, # column
+        "dot3EponFecObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.3",
+        }, # node
+        "dot3EponFecTable" : {
+            "nodetype" : "table",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.3.1",
+            "status" : "current",
+            "description" :
+                """A table of dot3 EPON FEC management objects.
+The entries in the table are control and status objects
+and statistic counters for the FEC layer.
+Each object has a row for every virtual link denoted by
+the corresponding ifIndex.
+The LLID field, as defined in the [802.3ah], is a 2-byte
+register (15-bit field and a broadcast bit) limiting the
+number of virtual links to 32768.  Typically the number
+of expected virtual links in a PON is like the number of
+ONUs, which is 32-64, plus an additional entry for
+broadcast LLID (with a value of 0xffff).""",
+        }, # table
+        "dot3EponFecEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.3.1.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+            ],
+            "description" :
+                """An entry in the dot3 EPON FEC table.
+Rows exist for an OLT interface and an ONU interface.
+A row in the table is denoted by the ifIndex of the link
+and it is created when the ifIndex is created.
+The rows in the table for an ONU interface are created
+
+
+
+at system initialization.
+The row in the table corresponding to the OLT ifIndex
+and the row corresponding to the broadcast virtual link
+are created at system initialization.
+A row in the table corresponding to the ifIndex of a
+virtual links is created when a virtual link is
+established (ONU registers) and deleted when the virtual
+link is deleted (ONU deregisters).""",
+        }, # row
+        "dot3EponFecPCSCodingViolation" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.3.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "octets",
+            "description" :
+                """For a 100 Mbps operation, it is a count of the number of
+times an invalid code-group is received, other than the
+/H/ code-group.  For a 1000 Mbps operation, it is a count
+of the number of times an invalid codegroup is received,
+other than the /V/ code-group.  /H/ denotes a special
+4b5b codeword of [802.3] 100 Mbps PCS layer (clause 24),
+and /V/ denotes a special 8b10b codeword of the [802.3]
+1000 Mbps PCS layer (clause 36).
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+            "reference" :
+                """[802.3ah], 30.5.1.1.12.""",
+        }, # column
+        "dot3EponFecAbility" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.3.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "unknown" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "supported" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "unsupported" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """An object that indicates the support of operation of the
+optional FEC sublayer of the 1000BASE-PX PHY specified
+in [802.3ah], clause 65.2.
+unknown(1) value is assigned in the initialization, for non
+FEC support state or type not yet known.  unsupported(3)
+value is assigned when the sublayer is not supported.
+supported(2) value is assigned when the sublayer is
+supported.
+This object is applicable for an OLT, with the same
+value for all virtual interfaces, and for an ONU.
+The FEC counters will have a zero value when the
+interface is not supporting FEC.
+The counters:
+ dot3EponFecPCSCodingViolation - not affected by FEC
+ ability.
+ dot3EponFecCorrectedBlocks    - has a zero value when
+  dot3EponFecAbility is unknown(1) and unsupported(3).
+ dot3EponFecUncorrectableBlocks  - has a zero value when
+  dot3EponFecAbility is unknown(1) and unsupported(3).
+ dot3EponFecBufferHeadCodingViolation - has a zero value
+  when dot3EponFecAbility is unknown(1) and
+  unsupported(3).""",
+            "reference" :
+                """[802.3ah], 30.5.1.1.13.""",
+        }, # column
+        "dot3EponFecMode" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.3.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "unknown" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "disabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "enabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "unknown",
+            "description" :
+                """An object that defines the mode of operation of the
+optional FEC sublayer of the 1000BASE-PX PHY, specified
+in [802.3ah], clause 65.2, and reflects its state.
+A GET operation returns the current mode of operation
+of the PHY.  A SET operation changes the mode of
+operation of the PHY to the indicated value.
+unknown(1) value is assigned in the initialization for non
+  FEC support state or type not yet known.
+
+
+
+disabled(2) value is assigned when the FEC sublayer is
+  operating in disabled mode.
+enabled(3) value is assigned when the FEC sublayer is
+  operating in FEC mode.
+The write operation is not restricted in this document
+and can be done at any time.  Changing dot3EponFecMode
+state can lead to disabling the Forward Error Correction
+on the respective interface, which can lead to a
+degradation of the optical link, and therefore may lead
+to an interruption of service for the users connected to
+the respective EPON interface.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+The counting of
+the FEC counters will stop when the FEC of the interface
+is disabled.
+The counters:
+ dot3EponFecPCSCodingViolation - not affected by FEC
+ mode.
+ dot3EponFecCorrectedBlocks - stops counting when
+ Rx_FEC is not enabled.  (unknown(1) and disabled(2)).
+ dot3EponFecUncorrectableBlocks - stops counting when
+ Rx_FEC is not enabled (unknown(1) and disabled(2)).
+ dot3EponFecBufferHeadCodingViolation - stops counting
+ when Rx_FEC is not enabled (unknown(1) and
+ disabled(2)).
+The object:
+ dot3EponFecAbility - indicates the FEC ability and
+ is not affected by the dot3EponFecMode object.""",
+            "reference" :
+                """[802.3ah], 30.5.1.1.14.""",
+        }, # column
+        "dot3EponFecCorrectedBlocks" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.3.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """For 10PASS-TS, 2BASE-TL, and 1000BASE-PX PHYs, it is a
+count of corrected FEC blocks.  This counter will not
+increment for other PHY Types.  Increment the counter by
+one for each received block that is corrected by the FEC
+function in the PHY.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+
+
+
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+            "reference" :
+                """[802.3ah], 30.5.1.1.15.""",
+        }, # column
+        "dot3EponFecUncorrectableBlocks" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.3.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """For 10PASS-TS, 2BASE-TL, and 1000BASE-PX PHYs, it is a
+count of uncorrectable FEC blocks.  This counter will not
+increment for other PHY Types.  Increment the counter by
+one for each FEC block that is determined to be
+uncorrectable by the FEC function in the PHY.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+            "reference" :
+                """[802.3ah], 30.5.1.1.16.""",
+        }, # column
+        "dot3EponFecBufferHeadCodingViolation" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.3.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "octets",
+            "description" :
+                """For a 1000 Mbps operation, it is a count of the number of
+invalid code-group received directly from the link.  The
+value has a meaning only in 1000 Mbps mode and it is
+zero otherwise.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+        }, # column
+        "dot3ExtPkgObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4",
+        }, # node
+        "dot3ExtPkgControlObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1",
+        }, # node
+        "dot3ExtPkgControlTable" : {
+            "nodetype" : "table",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.1",
+            "status" : "current",
+            "description" :
+                """A table of Extended package Control management
+objects.  Entries in the table are control and status
+indication objects of an EPON interface, which are
+gathered in an extended package as an addition to the
+objects based on the [802.3ah], clause 30, attributes.
+Each object has a row for every virtual link denoted by
+the corresponding ifIndex.
+The LLID field, as defined in the [802.3ah], is a 2-byte
+register (15-bit field and a broadcast bit) limiting the
+number of virtual links to 32768.  Typically the number
+of expected virtual links in a PON is like the number of
+ONUs, which is 32-64, plus an additional entry for
+broadcast LLID (with a value of 0xffff).""",
+        }, # table
+        "dot3ExtPkgControlEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.1.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+            ],
+            "description" :
+                """An entry in the Extended package Control table.
+Rows exist for an OLT interface and an ONU interface.
+A row in the table is denoted by the ifIndex of the link
+and it is created when the ifIndex is created.
+The rows in the table for an ONU interface are created
+at system initialization.
+The row in the table corresponding to the OLT ifIndex
+and the row corresponding to the broadcast virtual link
+are created at system initialization.
+A row in the table corresponding to the ifIndex of a
+virtual links is created when a virtual link is
+established (ONU registers) and deleted when the virtual
+link is deleted (ONU deregisters).""",
+        }, # row
+        "dot3ExtPkgObjectReset" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "running" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "reset" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "running",
+            "description" :
+                """This object is used to reset the EPON interface.  The
+interface may be unavailable while the reset occurs and
+data may be lost.
+Setting this object to running(1) will cause the
+interface to enter into running mode.  Setting this
+object to reset(2) will cause the interface to go into
+reset mode.  When getting running(1), the interface is in
+running mode.  When getting reset(2), the interface is in
+reset mode.
+The write operation is not restricted in this document
+and can be done at any time.  Changing
+dot3ExtPkgObjectReset state can lead to a reset of the
+respective interface, leading to an interruption of
+service for the users connected to the respective EPON
+interface.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+A reset for a specific virtual interface resets only
+this virtual interface and not the physical interface.
+Thus, a virtual link that is malfunctioning can be
+reset without affecting the operation of other virtual
+interfaces.
+The reset can cause Discontinuities in the values of the
+counters of the interface, similar to re-initialization
+of the management system.  Discontinuity should be
+indicated by the ifCounterDiscontinuityTime object of
+the Interface MIB module.""",
+        }, # column
+        "dot3ExtPkgObjectPowerDown" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "default" : "false",
+            "description" :
+                """This object is used to power down the EPON interface.
+The interface may be unavailable while the power down
+occurs and data may be lost.
+Setting this object to true(1) will cause the interface
+to enter into power down mode.  Setting this object to
+false(2) will cause the interface to go out of power
+down mode.  When getting true(1), the interface is in
+power down mode.  When getting false(2), the interface is
+not in power down mode.
+The write operation is not restricted in this document
+and can be done at any time.  Changing
+dot3ExtPkgObjectPowerDown state can lead to a power down
+of the respective interface, leading to an interruption
+of service of the users connected to the respective EPON
+interface.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+A power down/up of a specific virtual interface affects
+only the virtual interface and not the physical
+interface.  Hence a virtual link, which needs a certain
+handling, can be powered down and then powered up without
+disrupting the operation of other virtual interfaces.
+The object is relevant when the admin state of the
+interface is active as set by the dot3MpcpAdminState.""",
+        }, # column
+        "dot3ExtPkgObjectNumberOfLLIDs" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A read only object that indicates the number of
+registered LLIDs.  The initialization value is 0.
+This object is applicable for an OLT with the same
+value for all virtual interfaces and for an ONU.
+The LLID field, as defined in the [802.3ah], is a 2-byte
+register (15-bit field and a broadcast bit) limiting the
+number of virtual links to 32768.  Typically the number
+of expected virtual links in a PON is like the number of
+ONUs, which is 32-64, plus an additional entry for
+broadcast LLID (with a value of 0xffff).  At the ONU the
+number of LLIDs for an interface is one.""",
+        }, # column
+        "dot3ExtPkgObjectFecEnabled" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "noFecEnabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "fecTxEnabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "fecRxEnabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "fecTxRxEnabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "noFecEnabled",
+            "description" :
+                """An object defining the FEC mode of operation of the
+interface, and indicating its state.  The modes defined in
+this object are extensions to the FEC modes defined in
+the dot3EponFecMode object.
+When noFECEnabled(1), the interface does not enable FEC
+mode.
+When fecTxEnabled(2), the interface enables the FEC
+transmit mode.
+When fecRxEnabled(3), the interface enables the FEC
+receive mode.
+When fecTxRxEnabled(4), the interface enables the FEC
+transmit and receive mode.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.
+The FEC counters are referring to the receive path.  The
+FEC counters will stop when the FEC receive mode of the
+interface is disabled, as defined by fecRxEnabled(3)
+and fecTxRxEnabled(4) values.
+The counters:
+ dot3EponFecPCSCodingViolation - not affected by FEC
+ mode.
+ dot3EponFecCorrectedBlocks - stops counting when
+ Rx_FEC is not enabled (noFecEnabled(1) and
+ fecTxEnabled(2)).
+ dot3EponFecUncorrectableBlocks - stops counting when
+ Rx_FEC is not enabled (noFecEnabled(1) and
+ fecTxEnabled(2)).
+ dot3EponFecBufferHeadCodingViolation - stops counting
+ when Rx_FEC is not enabled (noFecEnabled(1) and
+ fecTxEnabled(2)).
+The objects:
+ dot3EponFecAbility - indicates the FEC ability and is
+ not affected by the FEC mode.
+ dot3EponFecMode - indicates the FEC mode for combined RX
+ and TX.
+The write operation is not restricted in this document
+and can be done at any time.  Changing
+dot3ExtPkgObjectFecEnabled state can lead to disabling
+the Forward Error Correction on the respective interface,
+which can lead to a degradation of the optical link, and
+therefore may lead to an interruption of service for the
+
+
+
+users connected to the respective EPON interface.""",
+        }, # column
+        "dot3ExtPkgObjectReportMaximumNumQueues" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "7"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "7"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "default" : "0",
+            "description" :
+                """An object, that defines the maximal number of queues in
+the REPORT message as defined in [802.3ah], clause 64.  For
+further information please see the description of the
+queue table.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.""",
+        }, # column
+        "dot3ExtPkgObjectRegisterAction" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "none" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "register" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "deregister" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "reregister" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "none",
+            "description" :
+                """An object configuring the registration state of an
+interface, and indicating its registration state.
+ Write operation changes the registration state to its new
+ value.
+ Read operation returns the value of the state.
+ The registration state is reflected in this object and in
+ the dot3MpcpRegistrationState object.
+ none(1) indicates an unknown state,
+ register(2) indicates a registered LLID,
+ deregister(3) indicates a deregistered LLID,
+ reregister(4) indicates an LLID that is reregistering.
+ The following list describes the operation of the
+ interface, as specified in the [802.3ah], when a write
+ operation is setting a value.
+  none(1) - not doing any action.
+  register(2) - registering an LLID that has been requested
+  for registration (The LLID is in registering mode.
+    dot3MpcpRegistrationState - registering(2) ).
+    deregister(3) - deregisters an LLID that is registered
+      (dot3MpcpRegistrationState - registered(3) ).
+
+
+
+    reregister(4) - reregister an LLID that is registered
+      (dot3MpcpRegistrationState - registered(3) ).
+    The behavior of an ONU and OLT interfaces, at each one
+    of the detailed operation at each state, is described in
+    the registration state machine of figure 64-22,
+    [802.3ah].
+   This object is applicable for an OLT and an ONU.  At the
+   OLT, it has a distinct value for each virtual interface.
+   The write operation is not restricted in this document
+   and can be done at any time.  Changing
+   dot3ExtPkgObjectRegisterAction state can lead to a change
+   in the registration state of the respective interface
+   leading to a deregistration and an interruption of
+   service of the users connected to the respective EPON
+   interface.""",
+        }, # column
+        "dot3ExtPkgQueueTable" : {
+            "nodetype" : "table",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.2",
+            "status" : "current",
+            "description" :
+                """A table of the extended package objects for queue
+management.  The [802.3ah] MPCP defines a report message
+of the occupancy of the transmit queues for the feedback
+BW request from the ONUs.  These queues serve the uplink
+transmission of the ONU and data is gathered there until
+the ONU is granted for transmission.
+The management table of the queues is added here mainly
+to control the reporting and to gather some statistics
+of their operation.  This table is not duplicating
+existing management objects of bridging queues,
+specified in [802.1d], since the existence of a
+dedicated transmit queuing mechanism is implied in the
+[802.3ah], and the ONU may be a device that is not a
+bridge with embedded bridging queues.
+The format of the REPORT message, as specified
+in [802.3], is presented below:
++-----------------------------------+
+|          Destination Address      |
++-----------------------------------+
+|          Source Address           |
++-----------------------------------+
+|          Length/Type              |
++-----------------------------------+
+|          OpCode                   |
++-----------------------------------+
+
+
+
+|          TimeStamp                |
++-----------------------------------+
+|          Number of queue Sets     |
++-----------------------------------+   /|\
+|          Report bitmap            |    |
++-----------------------------------+    |
+|          Queue 0 report           |    |
++-----------------------------------+    | repeated for
+|          Queue 1 report           |    | every
++-----------------------------------+    | queue_set
+|          Queue 2 report           |    |
++-----------------------------------+    |
+|          Queue 3 report           |    |
++-----------------------------------+    |
+|          Queue 4 report           |    |
++-----------------------------------+    |
+|          Queue 5 report           |    |
++-----------------------------------+    |
+|          Queue 6 report           |    |
++-----------------------------------+    |
+|          Queue 7 report           |    |
++-----------------------------------+   \|/
+|          Pad/reserved             |
++-----------------------------------+
+|          FCS                      |
++-----------------------------------+
+
+The 'Queue report' field reports the occupancy of each
+uplink transmission queue.
+The number of queue sets defines the number of the
+reported sets, as would be explained in the description
+of the dot3ExtPkgQueueSetsTable table.  For each set the
+report bitmap defines which queue is present in the
+report, meaning that although the MPCP REPORT message
+can report up to 8 queues in a REPORT message, the
+actual number is flexible.  The Queue table has a
+variable size that is limited by the
+dot3ExtPkgObjectReportMaximumNumQueues object, as an
+ONU can have fewer queues to report.
+The entries in the table are control and status
+indication objects for managing the queues of an EPON
+interface that are gathered in an extended package as
+an addition to the objects that are based on the
+[802.3ah] attributes.
+Each object has a row for every virtual link and for
+every queue in the report.
+The LLID field, as defined in the [802.3ah], is a 2-byte
+register (15-bit field and a broadcast bit) limiting the
+
+
+
+number of virtual links to 32768.  Typically the number
+of expected virtual links in a PON is like the number of
+ONUs, which is 32-64, plus an additional entry for
+broadcast LLID (with a value of 0xffff).
+The number of queues is between 0 and 7 and limited by
+dot3ExtPkgObjectReportMaximumNumQueues.""",
+        }, # table
+        "dot3ExtPkgQueueEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.2.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "dot3QueueIndex",
+            ],
+            "description" :
+                """An entry in the Extended package Queue table.  At the
+OLT, the rows exist for each ifIndex and dot3QueueIndex.
+At the ONU, rows exist for the single ifIndex for each
+dot3QueueIndex.
+Rows in the table are created when the ifIndex of the
+link is created.  A set of rows per queue are added for
+each ifIndex, denoted by the dot3QueueIndex.
+A set of rows per queue in the table, for an ONU
+interface, are created at the system initialization.
+A set of rows per queue in the table, corresponding to
+the OLT ifIndex and a set of rows per queue
+corresponding to the broadcast virtual link, are
+created at the system initialization.
+A set of rows per queue in the table, corresponding to
+the ifIndex of a virtual link, are created when the
+virtual link is established (ONU registers), and deleted
+when the virtual link is deleted (ONU deregisters).""",
+        }, # row
+        "dot3QueueIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "7"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "7"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """An object that identifies an index for the queue table
+reflecting the queue index of the queues that are
+reported in the MPCP REPORT message as defined in
+[802.3ah], clause 64.
+The number of queues is between 0 and 7, and limited by
+dot3ExtPkgObjectReportMaximumNumQueues.""",
+        }, # column
+        "dot3ExtPkgObjectReportNumThreshold" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "7"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "7"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """An object that defines the number of thresholds for each
+queue in the REPORT message as defined in [802.3ah],
+clause 64.
+Each queue_set reporting will provide information on the
+queue occupancy of frames below the matching Threshold.
+Read operation reflects the number of thresholds.
+Write operation sets the number of thresholds for each
+queue.
+The write operation is not restricted in this document
+and can be done at any time.  Value cannot exceed the
+maximal value defined by the
+dot3ExtPkgObjectReportMaximumNumThreshold object.
+Changing dot3ExtPkgObjectReportNumThreshold can lead to
+a change in the reporting of the ONU interface and
+therefore to a change in the bandwidth allocation of the
+respective interface.  This change may lead a degradation
+or an interruption of service of the users connected to
+the respective EPON interface.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface
+and for each queue.  At the ONU, it has a distinct value
+for each queue.""",
+        }, # column
+        "dot3ExtPkgObjectReportMaximumNumThreshold" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "7"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "7"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "default" : "0",
+            "description" :
+                """An object, that defines the maximal number of thresholds
+for each queue in the REPORT message as defined in
+[802.3ah], clause 64.  Each queue_set reporting will
+provide information on the queue occupancy of frames
+below the matching Threshold.
+
+
+
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface
+and for each queue.  At the ONU, it has a distinct value
+for each queue.""",
+        }, # column
+        "dot3ExtPkgStatTxFramesQueue" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of the number of times a frame transmission
+occurs from the corresponding 'Queue'.
+Increment the counter by one for each frame transmitted,
+which is an output of the 'Queue'.
+The 'Queue' marking matches the REPORT MPCP message
+Queue field as defined in [802.3ah], clause 64.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface
+and for each queue.  At the ONU, it has a distinct value
+for each queue.
+At the OLT the value should be zero.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+        }, # column
+        "dot3ExtPkgStatRxFramesQueue" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of the number of times a frame reception
+occurs from the corresponding 'Queue'.
+Increment the counter by one for each frame received,
+which is an input to the corresponding 'Queue'.
+The 'Queue' marking matches the REPORT MPCP message
+Queue field as defined in [802.3ah], clause 64.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface
+and for each queue.  At the ONU, it has a distinct value
+for each queue.
+Discontinuities of this counter can occur at
+
+
+
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+        }, # column
+        "dot3ExtPkgStatDroppedFramesQueue" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.2.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "frames",
+            "description" :
+                """A count of the number of times a frame drop
+occurs from the corresponding 'Queue'.
+Increment the counter by one for each frame dropped
+from the corresponding 'Queue'.
+The 'Queue' marking matches the REPORT MPCP message
+Queue field as defined in [802.3ah], clause 64.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface
+and for each queue.  At the ONU, it has a distinct value
+for each queue.
+At the OLT, the value should be zero.
+Discontinuities of this counter can occur at
+re-initialization of the management system and at other
+times, as indicated by the value of the
+ifCounterDiscontinuityTime object of the Interface MIB
+module.""",
+        }, # column
+        "dot3ExtPkgQueueSetsTable" : {
+            "nodetype" : "table",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.3",
+            "status" : "current",
+            "description" :
+                """A table of Extended package objects used for the
+management of the queue_sets.  Entries are control and
+status indication objects of an EPON interface, which
+are gathered in an extended package as an addition to
+the objects based on the [802.3ah] attributes.  The
+objects in this table are specific for the queue_sets,
+which are reported in the MPCP REPORT message as defined
+in [802.3ah], clause 64.
+The [802.3ah] MPCP defines a report message of the
+occupancy of the transmit queues for the feedback BW
+request from the ONUs.  These queues serve the uplink
+transmission of the ONU and data is gathered there until
+the ONU is granted for transmission.
+
+
+
+The management table of the queues_sets is added here
+mainly to control the reporting and to gather some
+statistics of their operation.  This table is not
+duplicating existing management objects of bridging
+queues, specified in [802.1d], since the existence of a
+dedicated transmit queuing mechanism is implied in the
+[802.3ah], and the ONU may be a device that is not a
+bridge with embedded bridging queues.
+The format of the REPORT message, as specified
+in [802.3], is presented below:
++-----------------------------------+
+|          Destination Address      |
++-----------------------------------+
+|          Source Address           |
++-----------------------------------+
+|          Length/Type              |
++-----------------------------------+
+|          OpCode                   |
++-----------------------------------+
+|          TimeStamp                |
++-----------------------------------+
+|          Number of queue Sets     |
++-----------------------------------+   /|\
+|          Report bitmap            |    |
++-----------------------------------+    |
+|          Queue 0 report           |    |
++-----------------------------------+    | repeated for
+|          Queue 1 report           |    | every
++-----------------------------------+    | queue_set
+|          Queue 2 report           |    |
++-----------------------------------+    |
+|          Queue 3 report           |    |
++-----------------------------------+    |
+|          Queue 4 report           |    |
++-----------------------------------+    |
+|          Queue 5 report           |    |
++-----------------------------------+    |
+|          Queue 6 report           |    |
++-----------------------------------+    |
+|          Queue 7 report           |    |
++-----------------------------------+   \|/
+|          Pad/reserved             |
++-----------------------------------+
+|          FCS                      |
++-----------------------------------+
+
+As can be seen from the message format, the ONU
+interface reports of the status of up to 8 queues
+
+
+
+and it can report in a single MPCP REPORT message
+of a few sets of queues.
+The number of queue_sets defines the number of the
+reported sets, and it can reach a value of up to 8.
+It means that an ONU can hold a variable number of
+sets between 0 and 7.
+The dot3ExtPkgQueueSetsTable table has a variable
+queue_set size that is limited by the
+dot3ExtPkgObjectReportMaximumNumThreshold object as an
+ONU can have fewer queue_sets to report.
+The 'Queue report' field reports the occupancy of each
+uplink transmission queue.  The queue_sets can be used to
+report the occupancy of the queues in a few levels as to
+allow granting, in an accurate manner, of only part of
+the data available in the queues.  A Threshold is
+defined for each queue_set to define the level of the
+queue that is counted for the report of the occupancy.
+The threshold is reflected in the queue_set table by the
+dot3ExtPkgObjectReportThreshold object.
+For each queue set, the report bitmap defines which
+queues are present in the report, meaning that
+although the MPCP REPORT message can report of up to 8
+queues in a REPORT message, the actual number is
+flexible.
+The dot3ExtPkgQueueSetsTable table has a variable queue
+size that is limited by the
+dot3ExtPkgObjectReportMaximumNumQueues object as an ONU
+can have fewer queues to report.
+Each object has a row for every virtual link, for each
+queue in the report and for each queue_set in the queue.
+The LLID field, as defined in the [802.3ah], is a 2-byte
+register (15-bit field and a broadcast bit) limiting the
+number of virtual links to 32768.  Typically the number
+of expected virtual links in a PON is like the number of
+ONUs, which is 32-64, plus an additional entry for
+broadcast LLID (with a value of 0xffff).
+The number of queues is between 0 and 7 and limited by
+dot3ExtPkgObjectReportMaximumNumQueues.
+The number of queues_sets is between 0 and 7 and limited
+by dot3ExtPkgObjectReportMaximumNumThreshold.""",
+        }, # table
+        "dot3ExtPkgQueueSetsEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.3.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "dot3QueueSetQueueIndex",
+                "dot3QueueSetIndex",
+            ],
+            "description" :
+                """An entry in the Extended package queue_set table.  At
+
+
+
+the OLT, the rows exist for each ifIndex,
+dot3QueueSetQueueIndex and dot3QueueSetIndex.  At the
+ONU, rows exist for the single ifIndex, for each
+dot3QueueSetQueueIndex and dot3QueueSetIndex.
+Rows in the table are created when the ifIndex of the
+link is created.  A set of rows per queue and per
+queue_set are added for each ifIndex, denoted by
+dot3QueueSetIndex and dot3QueueSetQueueIndex.
+A set of rows per queue and per queue_set in the table,
+for an ONU interface are created at system
+initialization.
+A set of rows per queue and per queue_Set in the table,
+corresponding to the OLT ifIndex and a set of rows per
+queue and per queue_set, corresponding to the broadcast
+virtual link, are created at system initialization.
+A set of rows per queue and per queue_set in the table,
+corresponding to the ifIndex of a virtual link are
+created when the virtual link is established (ONU
+registers) and deleted when the virtual link is deleted
+(ONU deregisters).""",
+        }, # row
+        "dot3QueueSetQueueIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "7"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "7"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """An object that identifies the queue index for the
+dot3ExtPkgQueueSetsTable table.  The queues are reported
+in the MPCP REPORT message as defined in [802.3ah],
+clause 64.
+The number of queues is between 0 and 7, and limited by
+dot3ExtPkgObjectReportMaximumNumQueues.
+Value corresponds to the dot3QueueIndex of the queue
+table.""",
+        }, # column
+        "dot3QueueSetIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "7"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "7"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """An object that identifies the queue_set index for the
+dot3ExtPkgQueueSetsTable table.  The queues are reported
+in the MPCP REPORT message as defined in [802.3ah],
+clause 64.
+The number of queues_sets is between 0 and 7, and
+limited by dot3ExtPkgObjectReportMaximumNumThreshold.""",
+        }, # column
+        "dot3ExtPkgObjectReportThreshold" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "TQ (16nsec)",
+            "description" :
+                """An object that defines the value of a threshold report
+for each queue_set in the REPORT message as defined in
+[802.3ah], clause 64.  The number of sets for each queue
+is dot3ExtPkgObjectReportNumThreshold.
+In the REPORT message, each queue_set reporting will
+provide information on the occupancy of the queues for
+frames below the matching Threshold.
+The value returned shall be in Time quanta (TQ), which
+is 16nsec or 2 octets increments.
+Read operation provides the threshold value.  Write
+operation sets the value of the threshold.
+The write operation is not restricted in this document
+and can be done at any time.  Changing
+dot3ExtPkgObjectReportThreshold can lead to a change in
+the reporting of the ONU interface and therefore to a
+change in the bandwidth allocation of the respective
+interface.  This change may lead a degradation or an
+interruption of service for the users connected to the
+respective EPON interface.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface,
+for each queue and for each queue_set.  At the ONU, it has
+a distinct value for each queue and for each queue_set.""",
+        }, # column
+        "dot3ExtPkgOptIfTable" : {
+            "nodetype" : "table",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.5",
+            "status" : "current",
+            "description" :
+                """This table defines the control and status indication
+objects for the optical interface of the EPON interface.
+Each object has a row for every virtual link denoted by
+the corresponding ifIndex.
+The LLID field, as defined in the [802.3ah], is a 2-byte
+register (15-bit field and a broadcast bit) limiting the
+number of virtual links to 32768.  Typically the number
+of expected virtual links in a PON is like the number of
+ONUs, which is 32-64, plus an additional entry for
+broadcast LLID (with a value of 0xffff).
+Although the optical interface is a physical interface,
+there is a row in the table for each virtual interface.
+The reason for having a separate row for each virtual
+link is that the OLT has a separate link for each one of
+the ONUs.  For instance, ONUs could be in different
+distances with different link budgets and different
+receive powers, therefore having different power alarms.
+It is quite similar to a case of different physical
+interfaces.""",
+        }, # table
+        "dot3ExtPkgOptIfEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.5.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+            ],
+            "description" :
+                """An entry in the optical interface table of the EPON
+interface.
+Rows exist for an OLT interface and an ONU interface.
+A row in the table is denoted by the ifIndex of the link
+and it is created when the ifIndex is created.
+The rows in the table for an ONU interface are created
+at system initialization.
+The row in the table corresponding to the OLT ifIndex
+and the row corresponding to the broadcast virtual link
+are created at system initialization.
+A row in the table corresponding to the ifIndex of a
+virtual links is created when a virtual link is
+established (ONU registers) and deleted when the virtual
+link is deleted (ONU deregisters).""",
+        }, # row
+        "dot3ExtPkgOptIfSuspectedFlag" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.5.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object is a reliability indication.
+If true, the data in this entry may be unreliable.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.""",
+        }, # column
+        "dot3ExtPkgOptIfInputPower" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.5.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "units" : "0.1 dbm",
+            "description" :
+                """The optical power monitored at the input.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.""",
+        }, # column
+        "dot3ExtPkgOptIfLowInputPower" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.5.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "units" : "0.1 dbm",
+            "description" :
+                """The lowest optical power monitored at the input during the
+current 15-minute interval.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.""",
+        }, # column
+        "dot3ExtPkgOptIfHighInputPower" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.5.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "units" : "0.1 dbm",
+            "description" :
+                """The highest optical power monitored at the input during the
+current 15-minute interval.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.""",
+        }, # column
+        "dot3ExtPkgOptIfLowerInputPowerThreshold" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.5.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readwrite",
+            "units" : "0.1 dbm",
+            "description" :
+                """The lower limit threshold on input power.  If
+dot3ExtPkgOptIfInputPower drops to this value or below,
+a Threshold Crossing Alert (TCA) should be sent.
+Reading will present the threshold value.  Writing will
+set the value of the threshold.
+The write operation is not restricted in this document
+and can be done at any time.  Changing
+dot3ExtPkgOptIfLowerInputPowerThreshold can lead to a Threshold
+Crossing Alert (TCA) being sent for the respective interface.
+This alert may be leading to an interruption of service for the
+users connected to the respective EPON interface, depending on
+the system action on such an alert.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.""",
+        }, # column
+        "dot3ExtPkgOptIfUpperInputPowerThreshold" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.5.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readwrite",
+            "units" : "0.1 dbm",
+            "description" :
+                """The upper limit threshold on input power.  If
+dot3ExtPkgOptIfInputPower reaches or exceeds this value,
+a Threshold Crossing Alert (TCA) should be sent.
+Reading will present the threshold value.  Writing will
+set the value of the threshold.
+The write operation is not restricted in this document
+and can be done at any time.  Changing
+dot3ExtPkgOptIfUpperInputPowerThreshold can lead to a Threshold
+
+
+
+Crossing Alert (TCA) being sent for the respective interface.
+This alert may be leading to an interruption of service for the
+users connected to the respective EPON interface, depending on
+the system action on such an alert.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.""",
+        }, # column
+        "dot3ExtPkgOptIfOutputPower" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.5.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "units" : "0.1 dbm",
+            "description" :
+                """The optical power monitored at the output.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.""",
+        }, # column
+        "dot3ExtPkgOptIfLowOutputPower" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.5.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "units" : "0.1 dbm",
+            "description" :
+                """The lowest optical power monitored at the output during the
+current 15-minute interval.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.""",
+        }, # column
+        "dot3ExtPkgOptIfHighOutputPower" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.5.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "units" : "0.1 dbm",
+            "description" :
+                """The highest optical power monitored at the output during the
+current 15-minute interval.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.""",
+        }, # column
+        "dot3ExtPkgOptIfLowerOutputPowerThreshold" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.5.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readwrite",
+            "units" : "0.1 dbm",
+            "description" :
+                """The lower limit threshold on output power.  If
+dot3ExtPkgOptIfOutputPower drops to this value or below,
+a Threshold Crossing Alert (TCA) should be sent.
+Reading will present the threshold value.  Writing will
+set the value of the threshold.
+The write operation is not restricted in this document
+and can be done at any time.  Changing
+dot3ExtPkgOptIfLowerOutputPowerThreshold can lead to a Threshold
+Crossing Alert (TCA) being sent for the respective interface.
+This alert may be leading to an interruption of service for the
+users connected to the respective EPON interface, depending on
+the system action on such an alert.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.""",
+        }, # column
+        "dot3ExtPkgOptIfUpperOutputPowerThreshold" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.5.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readwrite",
+            "units" : "0.1 dbm",
+            "description" :
+                """The upper limit threshold on output power.  If
+dot3ExtPkgOptIfOutputPower reaches or exceeds this value,
+a Threshold Crossing Alert (TCA) should be sent.
+Reading will present the threshold value.  Writing will
+set the value of the threshold.
+The write operation is not restricted in this document
+and can be done at any time.  Changing
+dot3ExtPkgOptIfUpperOutputPowerThreshold can lead to a Threshold
+Crossing Alert (TCA) being sent for the respective interface.
+This alert may be leading to an interruption of service of the
+users connected to the respective EPON interface, depending on
+the system action on such an alert.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.""",
+        }, # column
+        "dot3ExtPkgOptIfSignalDetect" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.5.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readonly",
+            "default" : "false",
+            "description" :
+                """When getting true(1), there is a valid optical signal at
+the receive that is above the optical power level for
+signal detection.  When getting false(2) the optical
+signal at the receive is below the optical power level
+
+
+
+for signal detection.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.""",
+        }, # column
+        "dot3ExtPkgOptIfTransmitAlarm" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.5.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readonly",
+            "default" : "false",
+            "description" :
+                """When getting true(1) there is a non-valid optical signal
+at the transmit of the interface, either a higher level
+or lower level than expected.  When getting false(2) the
+optical signal at the transmit is valid and in the
+required range.
+This object is applicable for an OLT and an ONU.  At the
+OLT, it has a distinct value for each virtual interface.""",
+        }, # column
+        "dot3ExtPkgOptIfTransmitEnable" : {
+            "nodetype" : "column",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.1.4.1.5.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "default" : "false",
+            "description" :
+                """Setting this object to true(1) will cause the optical
+interface to start transmission (according to the
+control protocol specified for the logical interface).
+Setting this object to false(2) will cause the
+interface to stop the optical transmission.
+When getting true(1), the optical interface is in
+transmitting mode (obeying to the logical control
+protocol).
+When getting false(2), the optical interface is not in
+transmitting mode.
+The write operation is not restricted in this document
+and can be done at any time.  Changing
+dot3ExtPkgOptIfTransmitEnable state can lead to a halt
+in the optical transmission of the respective interface
+leading to an interruption of service of the users
+connected to the respective EPON interface.
+The object is relevant when the admin state of the
+interface is active as set by the dot3MpcpAdminState.
+This object is applicable for an OLT and an ONU.  At the
+OLT it, has a distinct value for each virtual interface.""",
+        }, # column
+        "dot3EponConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.2",
+        }, # node
+        "dot3EponGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.2.1",
+        }, # node
+        "dot3EponCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.2.2",
+        }, # node
+    }, # nodes
+
+    "groups" : {
+        "dot3MpcpGroupBase" : {
+            "nodetype" : "group",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.2.1.1",
+            "status" : "current",
+            "members" : {
+                "dot3MpcpOperStatus" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpAdminState" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpMode" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpSyncTime" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpLinkID" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpRemoteMACAddress" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpRegistrationState" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpMaximumPendingGrants" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpTransmitElapsed" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpReceiveElapsed" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpRoundTripTime" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects of dot3 Mpcp Control entity state
+definition.  Objects are per LLID.""",
+        }, # group
+        "dot3MpcpGroupStat" : {
+            "nodetype" : "group",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.2.1.2",
+            "status" : "current",
+            "members" : {
+                "dot3MpcpMACCtrlFramesTransmitted" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpMACCtrlFramesReceived" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpDiscoveryWindowsSent" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpDiscoveryTimeout" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpTxRegRequest" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpRxRegRequest" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpTxRegAck" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpRxRegAck" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpTxReport" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpRxReport" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpTxGate" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpRxGate" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpTxRegister" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpRxRegister" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects of dot3 Mpcp Statistics.
+Objects are per LLID.""",
+        }, # group
+        "dot3OmpeGroupID" : {
+            "nodetype" : "group",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.2.1.3",
+            "status" : "current",
+            "members" : {
+                "dot3OmpEmulationType" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects of dot3 OMP emulation entity
+state definition.  Objects are per LLID.""",
+        }, # group
+        "dot3OmpeGroupStat" : {
+            "nodetype" : "group",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.2.1.4",
+            "status" : "current",
+            "members" : {
+                "dot3OmpEmulationSLDErrors" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3OmpEmulationCRC8Errors" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3OmpEmulationBadLLID" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3OmpEmulationGoodLLID" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3OmpEmulationOnuPonCastLLID" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3OmpEmulationOltPonCastLLID" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3OmpEmulationBroadcastBitNotOnuLlid" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3OmpEmulationOnuLLIDNotBroadcast" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3OmpEmulationBroadcastBitPlusOnuLlid" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3OmpEmulationNotBroadcastBitNotOnuLlid" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects of dot3 OMP emulation
+Statistics.  Objects are per LLID.""",
+        }, # group
+        "dot3EponFecGroupAll" : {
+            "nodetype" : "group",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.2.1.5",
+            "status" : "current",
+            "members" : {
+                "dot3EponFecPCSCodingViolation" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3EponFecAbility" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3EponFecMode" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3EponFecCorrectedBlocks" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3EponFecUncorrectableBlocks" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3EponFecBufferHeadCodingViolation" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects of dot3 FEC group control and
+statistics.  Objects are per LLID.""",
+        }, # group
+        "dot3ExtPkgGroupControl" : {
+            "nodetype" : "group",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.2.1.6",
+            "status" : "current",
+            "members" : {
+                "dot3ExtPkgObjectReset" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgObjectPowerDown" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgObjectNumberOfLLIDs" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgObjectFecEnabled" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgObjectReportMaximumNumQueues" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgObjectRegisterAction" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects of dot3ExtPkg control
+definition.  Objects are per LLID.""",
+        }, # group
+        "dot3ExtPkgGroupQueue" : {
+            "nodetype" : "group",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.2.1.7",
+            "status" : "current",
+            "members" : {
+                "dot3ExtPkgObjectReportNumThreshold" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgObjectReportMaximumNumThreshold" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgStatTxFramesQueue" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgStatRxFramesQueue" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgStatDroppedFramesQueue" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects of dot3ExtPkg Queue
+control.  Objects are per LLID, per queue.""",
+        }, # group
+        "dot3ExtPkgGroupQueueSets" : {
+            "nodetype" : "group",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.2.1.8",
+            "status" : "current",
+            "members" : {
+                "dot3ExtPkgObjectReportThreshold" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects of dot3ExtPkg queue_set
+control.  Objects are per LLID, per queue, per
+queue_set.""",
+        }, # group
+        "dot3ExtPkgGroupOptIf" : {
+            "nodetype" : "group",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.2.1.9",
+            "status" : "current",
+            "members" : {
+                "dot3ExtPkgOptIfSuspectedFlag" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgOptIfInputPower" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgOptIfLowInputPower" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgOptIfHighInputPower" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgOptIfLowerInputPowerThreshold" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgOptIfUpperInputPowerThreshold" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgOptIfOutputPower" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgOptIfLowOutputPower" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgOptIfHighOutputPower" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgOptIfLowerOutputPowerThreshold" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgOptIfUpperOutputPowerThreshold" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgOptIfSignalDetect" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgOptIfTransmitAlarm" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgOptIfTransmitEnable" : {
+                    "nodetype" : "member",
+                    "module" : "DOT3-EPON-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects of control and status indication
+of the optical interface.
+Objects are per LLID.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "dot3MPCPCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.2.2.1",
+            "status" : "current",
+            "description" :
+                """The compliance statement for Multi-Point
+Control Protocol interfaces.""",
+            "requires" : {
+                "dot3MpcpGroupBase" : {
+                    "nodetype" : "mandatory",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3MpcpGroupStat" : {
+                    "nodetype" : "optional",
+                    "module" : "DOT3-EPON-MIB",
+                    "description" :
+                        """This group is mandatory for all MPCP supporting
+interfaces for statistics collection.""",
+                },
+            }, # requires
+        }, # compliance
+        "dot3OmpeCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.2.2.2",
+            "status" : "current",
+            "description" :
+                """The compliance statement for OMPEmulation
+interfaces.""",
+            "requires" : {
+                "dot3OmpeGroupID" : {
+                    "nodetype" : "mandatory",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3OmpeGroupStat" : {
+                    "nodetype" : "optional",
+                    "module" : "DOT3-EPON-MIB",
+                    "description" :
+                        """This group is mandatory for all OMPemulation
+supporting interfaces for statistics collection.""",
+                },
+            }, # requires
+        }, # compliance
+        "dot3EponFecCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.2.2.3",
+            "status" : "current",
+            "description" :
+                """The compliance statement for FEC EPON interfaces.
+
+
+
+This group is mandatory for all FEC supporting
+interfaces for control and statistics collection.""",
+            "requires" : {
+                "dot3EponFecGroupAll" : {
+                    "nodetype" : "mandatory",
+                    "module" : "DOT3-EPON-MIB"
+                },
+            }, # requires
+        }, # compliance
+        "dot3ExtPkgCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "DOT3-EPON-MIB",
+            "oid" : "1.3.6.1.2.1.155.2.2.4",
+            "status" : "current",
+            "description" :
+                """The compliance statement for EPON Interfaces
+using the extended package.""",
+            "requires" : {
+                "dot3ExtPkgGroupControl" : {
+                    "nodetype" : "mandatory",
+                    "module" : "DOT3-EPON-MIB"
+                },
+                "dot3ExtPkgGroupQueue" : {
+                    "nodetype" : "optional",
+                    "module" : "DOT3-EPON-MIB",
+                    "description" :
+                        """ This group is mandatory for all EPON interfaces
+supporting REPORT queue management of the extended
+package.""",
+                },
+                "dot3ExtPkgGroupQueueSets" : {
+                    "nodetype" : "optional",
+                    "module" : "DOT3-EPON-MIB",
+                    "description" :
+                        """ This group is mandatory for all EPON interfaces
+supporting REPORT queue_sets management of the
+extended package.""",
+                },
+                "dot3ExtPkgGroupOptIf" : {
+                    "nodetype" : "optional",
+                    "module" : "DOT3-EPON-MIB",
+                    "description" :
+                        """This group is mandatory for all EPON interfaces
+supporting optical interfaces management,
+of the extended package.""",
+                },
+            }, # requires
+        }, # compliance
+    }, # compliances
+
+}