logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB.dic

@@ -0,0 +1,2447 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+
+MIB = {
+    "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+
+    "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF IP over Cable Data Network
+Working Group""",
+        "contact" : 
+            """        Azlina Ahmad
+Postal: Cisco Systems, Inc.
+        170 West Tasman Drive
+        San Jose, CA 95134, U.S.A.
+Phone:   408 853 7927
+E-mail: azlina@cisco.com
+
+        Greg Nakanishi
+Postal: Motorola
+        6450 Sequence Drive
+        San Diego, CA 92121, U.S.A.
+Phone:   858 404 2366
+E-mail: gnakanishi@motorola.com
+
+IETF IPCDN Working Group
+General Discussion: ipcdn@ietf.org
+
+
+
+Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn
+Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn
+Co-chairs: Richard Woundy,
+             richard_woundy@cable.comcast.com
+           Jean-Francois Mule, jf.mule@cablelabs.com""",
+        "description" :
+            """The Event Notification MIB is an extension of the
+CABLE DEVICE MIB.  It defines various notification
+objects for both cable modem and cable modem termination
+systems.  Two groups of SNMP notification objects are
+defined.  One group is for notifying cable modem events,
+and one group is for notifying cable modem termination
+system events.
+
+DOCSIS defines numerous events, and each event is
+assigned to a functional category.  This MIB defines
+a notification object for each functional category.
+The varbinding list of each notification includes
+information about the event that occurred on the
+device.
+
+Copyright (C) The Internet Society (2006).  This version
+of this MIB module is part of RFC 4547; see the RFC
+itself for full legal notices.""",
+        "revisions" : (
+            {
+                "date" : "2006-05-24 00:00",
+                "description" :
+                    """Initial version, published as RFC 4547.""",
+            },
+        ),
+        "identity node" : "docsDevNotifMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "NOTIFICATION-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "mib-2"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "SNMPv2-CONF", "name" : "NOTIFICATION-GROUP"},
+        {"module" : "DOCS-CABLE-DEVICE-MIB", "name" : "docsDevEvLevel"},
+        {"module" : "DOCS-CABLE-DEVICE-MIB", "name" : "docsDevEvId"},
+        {"module" : "DOCS-CABLE-DEVICE-MIB", "name" : "docsDevEvText"},
+        {"module" : "DOCS-CABLE-DEVICE-MIB", "name" : "docsDevSwFilename"},
+        {"module" : "DOCS-CABLE-DEVICE-MIB", "name" : "docsDevSwServer"},
+        {"module" : "DOCS-CABLE-DEVICE-MIB", "name" : "docsDevServerDhcp"},
+        {"module" : "DOCS-CABLE-DEVICE-MIB", "name" : "docsDevServerTime"},
+        {"module" : "DOCS-IF-MIB", "name" : "docsIfCmCmtsAddress"},
+        {"module" : "DOCS-IF-MIB", "name" : "docsIfCmtsCmStatusMacAddress"},
+        {"module" : "DOCS-IF-MIB", "name" : "docsIfDocsisBaseCapability"},
+        {"module" : "DOCS-IF-MIB", "name" : "docsIfCmStatusDocsisOperMode"},
+        {"module" : "DOCS-IF-MIB", "name" : "docsIfCmStatusModulationType"},
+        {"module" : "DOCS-IF-MIB", "name" : "docsIfCmtsCmStatusDocsisRegMode"},
+        {"module" : "DOCS-IF-MIB", "name" : "docsIfCmtsCmStatusModulationType"},
+        {"module" : "IF-MIB", "name" : "ifPhysAddress"},
+    ),
+
+    "nodes" : {
+        "docsDevNotifMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132",
+            "status" : "current",
+        }, # node
+        "docsDevNotifControl" : {
+            "nodetype" : "node",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.1",
+        }, # node
+        "docsDevCmNotifControl" : {
+            "nodetype" : "scalar",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Bits",
+                    "cmInitTLVUnknownNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "cmDynServReqFailNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "cmDynServRspFailNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "cmDynServAckFailNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "cmBpiInitNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "cmBPKMNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "cmDynamicSANotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "cmDHCPFailNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                    "cmSwUpgradeInitNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "8"
+                    },
+                    "cmSwUpgradeFailNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "9"
+                    },
+                    "cmSwUpgradeSuccessNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "10"
+                    },
+                    "cmSwUpgradeCVCNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "11"
+                    },
+                    "cmTODFailNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "12"
+                    },
+                    "cmDCCReqFailNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "13"
+                    },
+                    "cmDCCRspFailNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "14"
+                    },
+                    "cmDCCAckFailNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "15"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "()",
+            "description" :
+                """The object is used to enable specific CM notifications.
+For example, if the first bit is set, then
+docsDevCmInitTLVUnknownNotif is enabled.  If it is not set,
+the notification is disabled.  Note that notifications are
+also under the control of the MIB modules defined in
+RFC3413.
+
+If the device is rebooted,the value of this object SHOULD
+revert to the default value.""",
+        }, # scalar
+        "docsDevCmtsNotifControl" : {
+            "nodetype" : "scalar",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Bits",
+                    "cmtsInitRegReqFailNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "cmtsInitRegRspFailNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "cmtsInitRegAckFailNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "cmtsDynServReqFailNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "cmtsDynServRspFailNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "cmtsDynServAckFailNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "cmtsBpiInitNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "cmtsBPKMNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                    "cmtsDynamicSANotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "8"
+                    },
+                    "cmtsDCCReqFailNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "9"
+                    },
+                    "cmtsDCCRspFailNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "10"
+                    },
+                    "cmtsDCCAckFailNotif" : {
+                        "nodetype" : "namednumber",
+                        "number" : "11"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "()",
+            "description" :
+                """The object is used to enable specific CMTS notifications.
+For example, if the first bit is set, then
+docsDevCmtsInitRegRspFailNotif is enabled.  If it is not set,
+the notification is disabled.  Note that notifications are
+also under the control of the MIB modules defined in
+RFC3413.
+
+
+
+
+If the device is rebooted,the value of this object SHOULD
+revert to the default value.""",
+        }, # scalar
+        "docsDevCmNotifs" : {
+            "nodetype" : "node",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.2.0",
+        }, # node
+        "docsDevCmtsNotifs" : {
+            "nodetype" : "node",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.3.0",
+        }, # node
+        "docsDevNotifConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.4",
+        }, # node
+        "docsDevNotifGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.4.1",
+        }, # node
+        "docsDevNotifCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.4.2",
+        }, # node
+    }, # nodes
+
+    "notifications" : {
+        "docsDevCmInitTLVUnknownNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.2.0.1",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmCmtsAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusDocsisOperMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """Notification to indicate that an unknown TLV was
+encountered during the TLV parsing process.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+ event.
+- docsDevEvId: the unique identifier of the event that
+ occurred.
+- docsDevEvText: a textual description of the event.
+- ifPhysAddress: the MAC address of the cable
+ interface of this cable modem.
+- docsIfCmCmtsAddress: the MAC address of the CMTS
+ to which the CM is connected (if there is a cable
+ card/interface in the CMTS, then it is actually the
+ MAC address of the cable interface to which it is
+ connected).
+- docsIfDocsisBaseCapability: the highest
+ version of the DOCSIS specification (1.0, 1.1, 2.0)
+ that the device is capable of supporting.
+- docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+ that the CM is operating in.
+- docsIfCmStatusModulationType: the upstream modulation
+ methodology used by the CM.""",
+        }, # notification
+        "docsDevCmDynServReqFailNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.2.0.2",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmCmtsAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusDocsisOperMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the failure of a dynamic service
+request during the dynamic services process.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- ifPhysAddress: the MAC address of the cable
+  interface of this cable modem.
+- docsIfCmCmtsAddress: the MAC address of the CMTS
+  to which the CM is connected to (if there is a cable
+  card/interface in the CMTS, then it is actually the
+  MAC address of the cable interface to which it is
+  connected).
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+  that the CM is operating in.
+- docsIfCmStatusModulationType: the upstream modulation
+  methodology used by the CM.""",
+        }, # notification
+        "docsDevCmDynServRspFailNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.2.0.3",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmCmtsAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusDocsisOperMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """ A notification to report the failure of a dynamic service
+response during the dynamic services process.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- ifPhysAddress: the MAC address of the cable
+  interface of this cable modem.
+- docsIfCmCmtsAddress: the MAC address of the CMTS
+  to which the CM is connected (if there is a cable
+  card/interface in the CMTS, then it is actually the
+  MAC address of the cable interface to which it is
+  connected).
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+  that the CM is operating in.
+- docsIfCmStatusModulationType: the upstream modulation
+  methodology used by the CM.""",
+        }, # notification
+        "docsDevCmDynServAckFailNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.2.0.4",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmCmtsAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusDocsisOperMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the failure of a dynamic service
+acknowledgement during the dynamic services process.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- ifPhysAddress: the MAC address of the cable
+  interface of this cable modem.
+- docsIfCmCmtsAddress: the MAC address of the CMTS
+  to which the CM is connected (if there is a cable
+  card/interface in the CMTS, then it is actually the
+  MAC address of the cable interface to which it is
+  connected).
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+  that the CM is operating in.
+- docsIfCmStatusModulationType: the upstream modulation
+  methodology used by the CM.""",
+        }, # notification
+        "docsDevCmBpiInitNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.2.0.5",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmCmtsAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusDocsisOperMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the failure of a BPI
+initialization attempt during the registration process.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+
+
+
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- ifPhysAddress: the MAC address of the cable
+  interface of this cable modem.
+- docsIfCmCmtsAddress: the MAC address of the CMTS
+  to which the CM is connected (if there is a cable
+  card/interface in the CMTS, then it is actually the
+  MAC address of the cable interface to which it is
+  connected).
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+  that the CM is operating in.
+- docsIfCmStatusModulationType: the upstream modulation
+  methodology used by the CM.""",
+        }, # notification
+        "docsDevCmBPKMNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.2.0.6",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmCmtsAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusDocsisOperMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the failure of a Baseline
+Privacy Key Management (BPKM) operation.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- ifPhysAddress: the MAC address of the cable
+  interface of this cable modem.
+- docsIfCmCmtsAddress: the MAC address of the CMTS
+
+
+
+  to which the CM is connected (if there is a cable
+  card/interface in the CMTS, then it is actually the
+  MAC address of the cable interface to which it is
+  connected).
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+  that the CM is operating in.
+- docsIfCmStatusModulationType: the upstream modulation
+  methodology used by the CM.""",
+        }, # notification
+        "docsDevCmDynamicSANotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.2.0.7",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmCmtsAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusDocsisOperMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the failure of a dynamic security
+association operation.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- ifPhysAddress: the MAC address of the cable
+  interface of this cable modem.
+- docsIfCmCmtsAddress: the MAC address of the CMTS
+  to which the CM is connected (if there is a cable
+  card/interface in the CMTS, then it is actually the
+  MAC address of the cable interface to which it is
+  connected).
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+
+
+
+- docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+  that the CM is operating in.
+- docsIfCmStatusModulationType: the upstream modulation
+  methodology used by the CM.""",
+        }, # notification
+        "docsDevCmDHCPFailNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.2.0.8",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmCmtsAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsDevServerDhcp" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusDocsisOperMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the failure of a DHCP operation.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- ifPhysAddress: the MAC address of the cable
+  interface of this cable modem.
+- docsIfCmCmtsAddress: the MAC address of the CMTS
+  to which the CM is connected (if there is a cable
+  card/interface in the CMTS, then it is actually the
+  MAC address of the cable interface to which it is
+  connected).
+- docsDevServerDhcp: the IP address of the DHCP server.
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+  that the CM is operating in.
+- docsIfCmStatusModulationType: the upstream modulation
+  methodology used by the CM.""",
+        }, # notification
+        "docsDevCmSwUpgradeInitNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.2.0.9",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmCmtsAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsDevSwFilename" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevSwServer" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusDocsisOperMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to indicate that a software upgrade
+has been initiated on the device.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- ifPhysAddress: the MAC address of the cable
+  interface of this cable modem.
+- docsIfCmCmtsAddress: the MAC address of the CMTS
+  to which the CM is connected (if there is a cable
+  card/interface in the CMTS, then it is actually the
+  MAC address of the cable interface to which it is
+  connected).
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+  that the CM is operating in.
+- docsIfCmStatusModulationType: the upstream modulation
+  methodology used by the CM.""",
+        }, # notification
+        "docsDevCmSwUpgradeFailNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.2.0.10",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmCmtsAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsDevSwFilename" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevSwServer" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusDocsisOperMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the failure of a software upgrade
+attempt.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- ifPhysAddress: the MAC address of the cable
+  interface of this cable modem.
+- docsIfCmCmtsAddress: the MAC address of the CMTS
+  to which the CM is connected (if there is a cable
+  card/interface in the CMTS, then it is actually the
+  MAC address of the cable interface to which it is
+  connected).
+- docsDevSwFilename: the software image file name
+- docsDevSwServer: the IP address of the server that
+  the image is retrieved from.
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+  that the CM is operating in.
+- docsIfCmStatusModulationType: the upstream modulation
+  methodology used by the CM.""",
+        }, # notification
+        "docsDevCmSwUpgradeSuccessNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.2.0.11",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmCmtsAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsDevSwFilename" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevSwServer" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusDocsisOperMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the software upgrade success
+status.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- ifPhysAddress: the MAC address of the cable
+  interface of this cable modem.
+- docsIfCmCmtsAddress: the MAC address of the CMTS
+  to which the CM is connected (if there is a cable
+  card/interface in the CMTS, then it is actually the
+  MAC address of the cable interface to which it is
+  connected).
+- docsDevSwFilename: the software image file name
+- docsDevSwServer: the IP address of the server that
+  the image is retrieved from.
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+  that the CM is operating in.
+- docsIfCmStatusModulationType: the upstream modulation
+  methodology used by the CM.""",
+        }, # notification
+        "docsDevCmSwUpgradeCVCFailNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.2.0.12",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmCmtsAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusDocsisOperMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report that the verification of the
+code file has failed during a secure software upgrade
+attempt.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- ifPhysAddress: the MAC address of the cable
+  interface of this cable modem.
+- docsIfCmCmtsAddress: the MAC address of the CMTS
+  to which the CM is connected (if there is a cable
+  card/interface in the CMTS, then it is actually the
+  MAC address of the cable interface to which it is
+  connected).
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+  that the CM is operating in.
+- docsIfCmStatusModulationType: the upstream modulation
+  methodology used by the CM.""",
+        }, # notification
+        "docsDevCmTODFailNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.2.0.13",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmCmtsAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsDevServerTime" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusDocsisOperMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the failure of a time of day
+
+
+
+operation.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- ifPhysAddress: the MAC address of the cable
+  interface of this cable modem.
+- docsIfCmCmtsAddress: the MAC address of the CMTS
+  to which the CM is connected (if there is a cable
+  card/interface in the CMTS, then it is actually the
+  MAC address of the cable interface to which it is
+  connected).
+- docsDevServerTime: the IP address of the time server.
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+  that the CM is operating in.
+- docsIfCmStatusModulationType: the upstream modulation
+  methodology used by the CM.""",
+        }, # notification
+        "docsDevCmDCCReqFailNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.2.0.14",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmCmtsAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusDocsisOperMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """ A notification to report the failure of a dynamic channel
+change request during the dynamic channel change process
+on the CM.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+
+
+
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- ifPhysAddress: the MAC address of the cable
+  interface of this cable modem.
+- docsIfCmCmtsAddress: the MAC address of the CMTS
+  to which the CM is connected (if there is a cable
+  card/interface in the CMTS, then it is actually the
+  MAC address of the cable interface to which it is
+  connected).
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+  that the CM is operating in.
+- docsIfCmStatusModulationType: the upstream modulation
+  methodology used by the CM.""",
+        }, # notification
+        "docsDevCmDCCRspFailNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.2.0.15",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmCmtsAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusDocsisOperMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the failure of a dynamic channel
+change response during the dynamic channel
+change process on the CM.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- ifPhysAddress: the MAC address of the cable
+
+
+
+  interface of this cable modem.
+- docsIfCmCmtsAddress: the MAC address of the CMTS
+  to which the CM is connected (if there is a cable
+  card/interface in the CMTS, then it is actually the
+  MAC address of the cable interface to which it is
+  connected).
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+  that the CM is operating in.
+- docsIfCmStatusModulationType: the upstream modulation
+  methodology used by the CM.""",
+        }, # notification
+        "docsDevCmDCCAckFailNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.2.0.16",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmCmtsAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusDocsisOperMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the failure of a dynamic channel
+change acknowledgement during the dynamic channel
+change process on the CM.
+
+This notification sends additional information about
+the event by including the following objects in its
+
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- ifPhysAddress: the MAC address of the cable
+  interface of this cable modem.
+- docsIfCmCmtsAddress: the MAC address of the CMTS
+  to which the CM is connected (if there is a cable
+  card/interface in the CMTS, then it is actually the
+  MAC address of the cable interface to which it is
+
+
+
+  connected).
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmStatusDocsisOperMode: the QOS level (1.0, 1.1)
+  that the CM is operating in.
+- docsIfCmtsCmStatusModulationType the upstream modulation
+  methodology used by the CM.""",
+        }, # notification
+        "docsDevCmtsInitRegReqFailNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.3.0.1",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsIfCmtsCmStatusMacAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmtsCmStatusDocsisRegMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmtsCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the failure of a registration
+request from a CM during the CM initialization
+process that was detected on the CMTS.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+  with which this notification is associated.
+- ifPhysAddress: the MAC address of the CMTS
+  (if there is a cable card/interface in the CMTS,
+  then it is actually the MAC address of the cable
+  interface that connected to the CM) cable interface
+  connected to the CM.
+- docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+  that the reporting CM is operating in.
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+
+
+
+- docsIfCmtsCmStatusModulationType: the upstream
+  modulation methodology used by the CM.""",
+        }, # notification
+        "docsDevCmtsInitRegRspFailNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.3.0.2",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsIfCmtsCmStatusMacAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmtsCmStatusDocsisRegMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmtsCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the failure of a registration
+response during the CM initialization
+process that was detected by the CMTS.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+  with which this notification is associated.
+- ifPhysAddress: the MAC address of the CMTS
+  (if there is a cable card/interface in the CMTS,
+  then it is actually the MAC address of the cable
+  interface that connected to the CM) cable interface
+  connected to the CM.
+- docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+  that the reporting CM is operating in.
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmtsCmStatusModulationType: the upstream
+  modulation methodology used by the CM.""",
+        }, # notification
+        "docsDevCmtsInitRegAckFailNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.3.0.3",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsIfCmtsCmStatusMacAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmtsCmStatusDocsisRegMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmtsCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the failure of a registration
+acknowledgement from the CM during the CM
+initialization process that was detected by the CMTS.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+  with which this notification is associated.
+- ifPhysAddress: the MAC address of the CMTS
+  (if there is a cable card/interface in the CMTS,
+  then it is actually the MAC address of the cable
+  interface that connected to the CM) cable interface
+  connected to the CM.
+- docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+  that the reporting CM is operating in.
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmtsCmStatusModulationType: the upstream
+  modulation methodology used by the CM.""",
+        }, # notification
+        "docsDevCmtsDynServReqFailNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.3.0.4",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsIfCmtsCmStatusMacAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmtsCmStatusDocsisRegMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmtsCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the failure of a dynamic service
+request during the dynamic services process
+that was detected by the CMTS.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+  with which this notification is associated.
+- ifPhysAddress: the MAC address of the CMTS
+  (if there is a cable card/interface in the CMTS,
+  then it is actually the MAC address of the cable
+  interface that connected to the CM) cable interface
+  connected to the CM.
+- docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+  that the reporting CM is operating in.
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmtsCmStatusModulationType: the upstream
+  modulation methodology used by the CM.""",
+        }, # notification
+        "docsDevCmtsDynServRspFailNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.3.0.5",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsIfCmtsCmStatusMacAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmtsCmStatusDocsisRegMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmtsCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the failure of a dynamic service
+response during the dynamic services process
+that was detected by the CMTS.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+  with which this notification is associated.
+- ifPhysAddress: the MAC address of the CMTS
+  (if there is a cable card/interface in the CMTS,
+  then it is actually the MAC address of the cable
+  interface that connected to the CM) cable interface
+  connected to the CM.
+- docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+  that the reporting CM is operating in.
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmtsCmStatusModulationType: the upstream
+  modulation methodology used by the CM.""",
+        }, # notification
+        "docsDevCmtsDynServAckFailNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.3.0.6",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsIfCmtsCmStatusMacAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmtsCmStatusDocsisRegMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmtsCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the failure of a dynamic service
+acknowledgement during the dynamic services
+process that was detected by the CMTS.
+
+This notification sends additional information about
+the event by including the following objects in its
+
+
+
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+  with which this notification is associated.
+- ifPhysAddress: the MAC address of the CMTS
+  (if there is a cable card/interface in the CMTS,
+  then it is actually the MAC address of the cable
+  interface that connected to the CM) cable interface
+  connected to the CM.
+- docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+  that the reporting CM is operating in.
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmtsCmStatusModulationType: the upstream
+  modulation methodology used by the CM.""",
+        }, # notification
+        "docsDevCmtsBpiInitNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.3.0.7",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsIfCmtsCmStatusMacAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmtsCmStatusDocsisRegMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmtsCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the failure of a BPI
+initialization attempt during the CM registration process
+that was detected by the CMTS.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+
+
+
+- docsDevEvText: a textual description of the event.
+- docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+  with which this notification is associated.
+- ifPhysAddress: the MAC address of the CMTS
+  (if there is a cable card/interface in the CMTS,
+  then it is actually the MAC address of the cable
+  interface that connected to the CM) cable interface
+  connected to the CM.
+- docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+  that the reporting CM is operating in.
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmtsCmStatusModulationType: the upstream
+  modulation methodology used by the CM.""",
+        }, # notification
+        "docsDevCmtsBPKMNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.3.0.8",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsIfCmtsCmStatusMacAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmtsCmStatusDocsisRegMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmtsCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the failure of a BPKM operation
+that is detected by the CMTS.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+  with which this notification is associated.
+- ifPhysAddress: the MAC address of the CMTS
+  (if there is a cable card/interface in the CMTS,
+  then it is actually the MAC address of the cable
+  interface that connected to the CM) cable interface
+
+
+
+  connected to the CM.
+- docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+  that the reporting CM is operating in.
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmtsCmStatusModulationType: the upstream
+  modulation methodology used by the CM.""",
+        }, # notification
+        "docsDevCmtsDynamicSANotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.3.0.9",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsIfCmtsCmStatusMacAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmtsCmStatusDocsisRegMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmtsCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the failure of a dynamic security
+association operation that is detected by the CMTS.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+  with which this notification is associated.
+- ifPhysAddress: the MAC address of the CMTS
+  (if there is a cable card/interface in the CMTS,
+  then it is actually the MAC address of the cable
+  interface that connected to the CM) cable interface
+  connected to the CM.
+- docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+  that the reporting CM is operating in.
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+
+
+
+- docsIfCmtsCmStatusModulationType: the upstream
+  modulation methodology used by the CM.""",
+        }, # notification
+        "docsDevCmtsDCCReqFailNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.3.0.10",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsIfCmtsCmStatusMacAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmtsCmStatusDocsisRegMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmtsCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the failure of a dynamic channel
+change request during the dynamic channel
+change process and is detected by the CMTS.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+  with which this notification is associated.
+- ifPhysAddress: the MAC address of the CMTS
+  (if there is a cable card/interface in the CMTS,
+  then it is actually the MAC address of the cable
+  interface that connected to the CM) cable interface
+  connected to the CM.
+- docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+  that the reporting CM is operating in.
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmtsCmStatusModulationType: the upstream
+  modulation methodology used by the CM.""",
+        }, # notification
+        "docsDevCmtsDCCRspFailNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.3.0.11",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsIfCmtsCmStatusMacAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmtsCmStatusDocsisRegMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmtsCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the failure of a dynamic channel
+change response during the dynamic channel
+change process and is detected by the CMTS.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+
+- docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+  with which this notification is associated.
+- ifPhysAddress: the MAC address of the CMTS
+  (if there is a cable card/interface in the CMTS,
+  then it is actually the MAC address of the cable
+  interface that connected to the CM) cable interface
+  connected to the CM.
+- docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+  that the reporting CM is operating in.
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmtsCmStatusModulationType: the upstream
+  modulation methodology used by the CM.""",
+        }, # notification
+        "docsDevCmtsDCCAckFailNotif" : {
+            "nodetype" : "notification",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.3.0.12",
+            "status" : "current",
+            "objects" : {
+                "docsDevEvLevel" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvId" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsDevEvText" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-CABLE-DEVICE-MIB"
+                },
+                "docsIfCmtsCmStatusMacAddress" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "ifPhysAddress" : {
+                    "nodetype" : "object",
+                    "module" : "IF-MIB"
+                },
+                "docsIfCmtsCmStatusDocsisRegMode" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfDocsisBaseCapability" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+                "docsIfCmtsCmStatusModulationType" : {
+                    "nodetype" : "object",
+                    "module" : "DOCS-IF-MIB"
+                },
+            },
+            "description" :
+                """A notification to report the failure of a dynamic channel
+change acknowledgement during the dynamic channel
+change process and is detected by the CMTS.
+
+This notification sends additional information about
+the event by including the following objects in its
+varbinding list.
+- docsDevEvLevel: the priority level associated with the
+  event.
+- docsDevEvId: the unique identifier of the event that
+  occurred.
+- docsDevEvText: a textual description of the event.
+- docsIfCmtsCmStatusMacAddress: the MAC address of the CM
+  with which this notification is associated.
+- ifPhysAddress: the MAC address of the CMTS
+  (if there is a cable card/interface in the CMTS,
+  then it is actually the MAC address of the cable
+  interface that connected to the CM) cable interface
+  connected to the CM.
+- docsIfCmtsCmStatusDocsisRegMode: the QOS level (1.0, 1.1)
+  that the reporting CM is operating in.
+- docsIfDocsisBaseCapability: the highest
+  version of the DOCSIS specification (1.0, 1.1, 2.0)
+  that the device is capable of supporting.
+- docsIfCmtsCmStatusModulationType: the upstream
+  modulation methodology used by the CM.""",
+        }, # notification
+    }, # notifications
+
+    "groups" : {
+        "docsDevCmNotifControlGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.4.1.1",
+            "status" : "current",
+            "members" : {
+                "docsDevCmNotifControl" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+            }, # members
+            "description" :
+                """This group represents objects that allow control
+over CM Notifications.""",
+        }, # group
+        "docsDevCmNotificationGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.4.1.2",
+            "status" : "current",
+            "members" : {
+                "docsDevCmInitTLVUnknownNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmDynServReqFailNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmDynServRspFailNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmDynServAckFailNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmBpiInitNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmBPKMNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmDynamicSANotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmDHCPFailNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmSwUpgradeInitNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmSwUpgradeFailNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmSwUpgradeSuccessNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmSwUpgradeCVCFailNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmTODFailNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmDCCReqFailNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmDCCRspFailNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmDCCAckFailNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of CM notifications providing device status
+and control.""",
+        }, # group
+        "docsDevCmtsNotifControlGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.4.1.3",
+            "status" : "current",
+            "members" : {
+                "docsDevCmtsNotifControl" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+            }, # members
+            "description" :
+                """This group represents objects that allow control
+over CMTS Notifications.""",
+        }, # group
+        "docsDevCmtsNotificationGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.4.1.4",
+            "status" : "current",
+            "members" : {
+                "docsDevCmtsInitRegReqFailNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmtsInitRegRspFailNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmtsInitRegAckFailNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmtsDynServReqFailNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmtsDynServRspFailNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmtsDynServAckFailNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmtsBpiInitNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmtsBPKMNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmtsDynamicSANotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmtsDCCReqFailNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmtsDCCRspFailNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmtsDCCAckFailNotif" : {
+                    "nodetype" : "member",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of CMTS notifications providing device
+status and control.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "docsDevCmNotifCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.4.2.1",
+            "status" : "current",
+            "description" :
+                """The compliance statement for CM Notifications and Control.""",
+            "requires" : {
+                "docsDevCmNotifControlGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmNotificationGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+            }, # requires
+        }, # compliance
+        "docsDevCmtsNotifCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB",
+            "oid" : "1.3.6.1.2.1.132.4.2.2",
+            "status" : "current",
+            "description" :
+                """The compliance statement for DOCSIS CMTS Notification
+and Control.""",
+            "requires" : {
+                "docsDevCmtsNotifControlGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+                "docsDevCmtsNotificationGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "DOCS-IETF-CABLE-DEVICE-NOTIFICATION-MIB"
+                },
+            }, # requires
+        }, # compliance
+    }, # compliances
+
+}