logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/CAPWAP-DOT11-MIB.dic

@@ -0,0 +1,482 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python CAPWAP-DOT11-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/CAPWAP-DOT11-MIB"
+
+MIB = {
+    "moduleName" : "CAPWAP-DOT11-MIB",
+
+    "CAPWAP-DOT11-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF Control And Provisioning of Wireless Access
+Points (CAPWAP) Working Group
+http://www.ietf.org/html.charters/capwap-charter.html""",
+        "contact" : 
+            """General Discussion: capwap@frascone.com
+To Subscribe: http://lists.frascone.com/mailman/listinfo/capwap
+
+Yang Shi (editor)
+Hangzhou H3C Tech. Co., Ltd.
+Beijing R&D Center of H3C, Digital Technology Plaza
+NO. 9 Shangdi 9th Street, Haidian District
+Beijing  100085
+China
+Phone: +86 010 82775276
+Email: rishyang@gmail.com
+
+David T. Perkins (editor)
+228 Bayview Dr.
+San Carlos, CA  94070
+USA
+Phone: +1 408 394-8702
+Email:  dperkins@dsperkins.com
+
+Chris Elliott (editor)
+1516 Kent St.
+Durham, NC  27707
+USA
+Phone: +1 919-308-1216
+Email: chelliot@pobox.com
+
+
+
+
+Yong Zhang (editor)
+Fortinet, Inc.
+1090 Kifer Road
+Sunnyvale, CA  94086
+USA
+Email: yzhang@fortinet.com""",
+        "description" :
+            """Copyright (c) 2010 IETF Trust and the persons identified as
+authors of the code.  All rights reserved.
+
+Redistribution and use in source and binary forms, with or
+without modification, is permitted pursuant to, and subject
+to the license terms contained in, the Simplified BSD License
+set forth in Section 4.c of the IETF Trust's Legal Provisions
+Relating to IETF Documents
+(http://trustee.ietf.org/license-info).
+
+This version of this MIB module is part of RFC 5834;
+see the RFC itself for full legal notices.
+
+This MIB module contains managed object definitions for
+CAPWAP Protocol binding for IEEE 802.11.""",
+        "revisions" : (
+            {
+                "date" : "2010-04-30 00:00",
+                "description" :
+                    """Initial version, published as RFC 5834""",
+            },
+        ),
+        "identity node" : "capwapDot11MIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-TC", "name" : "RowStatus"},
+        {"module" : "SNMPv2-TC", "name" : "TEXTUAL-CONVENTION"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "mib-2"},
+        {"module" : "SNMPv2-SMI", "name" : "Unsigned32"},
+        {"module" : "IF-MIB", "name" : "ifIndex"},
+        {"module" : "IF-MIB", "name" : "InterfaceIndex"},
+        {"module" : "CAPWAP-BASE-MIB", "name" : "CapwapBaseMacTypeTC"},
+        {"module" : "CAPWAP-BASE-MIB", "name" : "CapwapBaseTunnelModeTC"},
+    ),
+
+    "typedefs" : {
+        "CapwapDot11WlanIdTC" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "1",
+                "max" : "16"
+            },
+            ],
+            "range" : {
+                "min" : "1",
+                "max" : "16"
+            },
+            "format" : "d",
+            "description" :
+                """Represents the unique identifier of a Wireless Local Area
+Network (WLAN).""",
+        },
+        "CapwapDot11WlanIdProfileTC" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "1",
+                "max" : "512"
+            },
+            ],
+            "range" : {
+                "min" : "1",
+                "max" : "512"
+            },
+            "format" : "d",
+            "description" :
+                """Represents the unique identifier of a WLAN profile.""",
+        },
+    }, # typedefs
+
+    "nodes" : {
+        "capwapDot11MIB" : {
+            "nodetype" : "node",
+            "moduleName" : "CAPWAP-DOT11-MIB",
+            "oid" : "1.3.6.1.2.1.195",
+            "status" : "current",
+        }, # node
+        "capwapDot11Objects" : {
+            "nodetype" : "node",
+            "moduleName" : "CAPWAP-DOT11-MIB",
+            "oid" : "1.3.6.1.2.1.195.1",
+        }, # node
+        "capwapDot11WlanTable" : {
+            "nodetype" : "table",
+            "moduleName" : "CAPWAP-DOT11-MIB",
+            "oid" : "1.3.6.1.2.1.195.1.1",
+            "status" : "current",
+            "description" :
+                """A table that allows the operator to display and configure
+WLAN profiles, such as specifying the MAC type and tunnel mode
+for a WLAN.  Also, it helps the AC to configure a WLAN through
+the IEEE 802.11 MIB module.
+Values of all objects in this table are persistent at
+restart/reboot.""",
+        }, # table
+        "capwapDot11WlanEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "CAPWAP-DOT11-MIB",
+            "oid" : "1.3.6.1.2.1.195.1.1.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "capwapDot11WlanProfileId",
+            ],
+            "description" :
+                """A set of objects that stores the settings of a WLAN profile.""",
+        }, # row
+        "capwapDot11WlanProfileId" : {
+            "nodetype" : "column",
+            "moduleName" : "CAPWAP-DOT11-MIB",
+            "oid" : "1.3.6.1.2.1.195.1.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"CAPWAP-DOT11-MIB", "name" : "CapwapDot11WlanIdProfileTC"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """Represents the identifier of a WLAN profile that has a
+corresponding capwapDot11WlanProfileIfIndex.""",
+        }, # column
+        "capwapDot11WlanProfileIfIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "CAPWAP-DOT11-MIB",
+            "oid" : "1.3.6.1.2.1.195.1.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "InterfaceIndex"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Represents the index value that uniquely identifies a
+WLAN Profile Interface.  The interface identified by a
+particular value of this index is the same interface as
+identified by the same value of the ifIndex.
+The creation of a row object in the capwapDot11WlanTable
+triggers the AC to automatically create an WLAN Profile
+Interface identified by an ifIndex without manual
+intervention.
+Most MIB tables in the IEEE 802.11 MIB module
+[IEEE.802-11.2007] use an ifIndex to identify an interface
+to facilitate the configuration and maintenance, for example,
+dot11AuthenticationAlgorithmsTable.
+Using the ifIndex of a WLAN Profile Interface, the Operator
+could configure a WLAN through the IEEE 802.11 MIB module.""",
+        }, # column
+        "capwapDot11WlanMacType" : {
+            "nodetype" : "column",
+            "moduleName" : "CAPWAP-DOT11-MIB",
+            "oid" : "1.3.6.1.2.1.195.1.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"CAPWAP-BASE-MIB", "name" : "CapwapBaseMacTypeTC"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Represents whether the WTP SHOULD support the WLAN in
+Local or Split MAC modes.""",
+            "reference" :
+                """Section 6.1 of CAPWAP Protocol Binding for IEEE 802.11,
+RFC 5416.""",
+        }, # column
+        "capwapDot11WlanTunnelMode" : {
+            "nodetype" : "column",
+            "moduleName" : "CAPWAP-DOT11-MIB",
+            "oid" : "1.3.6.1.2.1.195.1.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"CAPWAP-BASE-MIB", "name" : "CapwapBaseTunnelModeTC"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Represents the frame tunneling mode to be used for IEEE 802.11
+data frames from all stations associated with the WLAN.
+Bits are exclusive with each other for a specific WLAN profile,
+and only one tunnel mode could be configured.
+If the operator set more than one bit, the value of the
+Response-PDU's error-status field is set to 'wrongValue',
+and the value of its error-index field is set to the index of
+the failed variable binding.""",
+            "reference" :
+                """Section 6.1 of CAPWAP Protocol Binding for IEEE 802.11,
+
+
+
+RFC 5416.""",
+        }, # column
+        "capwapDot11WlanRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "CAPWAP-DOT11-MIB",
+            "oid" : "1.3.6.1.2.1.195.1.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This variable is used to create, modify, and/or delete a row
+in this table.
+All the objects in a row can be modified only when the value
+of this object in the corresponding conceptual row is not
+'active'.  Thus, to modify one or more of the objects in
+this conceptual row:
+     a. change the row status to 'notInService',
+     b. change the values of the row
+     c. change the row status to 'active'
+The capwapDot11WlanRowStatus may be changed to 'active'
+if all the managed objects in the conceptual row with
+MAX-ACCESS read-create have been assigned valid values.
+
+When the operator deletes a WLAN profile, the AC SHOULD
+check whether the WLAN profile is bound with a radio.
+If yes, the value of the Response-PDU's error-status field
+is set to 'inconsistentValue', and the value of its
+error-index field is set to the index of the failed variable
+binding.  If not, the row object could be deleted.""",
+        }, # column
+        "capwapDot11WlanBindTable" : {
+            "nodetype" : "table",
+            "moduleName" : "CAPWAP-DOT11-MIB",
+            "oid" : "1.3.6.1.2.1.195.1.2",
+            "status" : "current",
+            "description" :
+                """A table that stores bindings between WLAN profiles
+(identified by capwapDot11WlanProfileId) and WTP Virtual Radio
+Interfaces.  The WTP Virtual Radio Interfaces on the AC
+correspond to physical layer (PHY) radios on the WTPs.
+It also stores the mappings between WLAN IDs and WLAN
+Basic Service Set (BSS) Interfaces.
+Values of all objects in this table are persistent at
+restart/reboot.""",
+            "reference" :
+                """Section 6.1 of CAPWAP Protocol Binding for IEEE 802.11,
+RFC 5416.""",
+        }, # table
+        "capwapDot11WlanBindEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "CAPWAP-DOT11-MIB",
+            "oid" : "1.3.6.1.2.1.195.1.2.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "capwapDot11WlanProfileId",
+            ],
+            "description" :
+                """A set of objects that stores the binding of a WLAN profile
+to a WTP Virtual Radio Interface.  It also stores the mapping
+between WLAN ID and WLAN BSS Interface.
+The INDEX object ifIndex is the ifIndex of a WTP Virtual
+Radio Interface.""",
+        }, # row
+        "capwapDot11WlanBindWlanId" : {
+            "nodetype" : "column",
+            "moduleName" : "CAPWAP-DOT11-MIB",
+            "oid" : "1.3.6.1.2.1.195.1.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"CAPWAP-DOT11-MIB", "name" : "CapwapDot11WlanIdTC"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Represents the WLAN ID of a WLAN.
+During a binding operation, the AC MUST select an unused
+WLAN ID from between 1 and 16 [RFC5416].  For example, to bind
+another WLAN profile to a radio that has been bound with
+a WLAN profile, WLAN ID 2 should be assigned.""",
+            "reference" :
+                """Section 6.1 of CAPWAP Protocol Binding for IEEE 802.11,
+RFC 5416.""",
+        }, # column
+        "capwapDot11WlanBindBssIfIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "CAPWAP-DOT11-MIB",
+            "oid" : "1.3.6.1.2.1.195.1.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "InterfaceIndex"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Represents the index value that uniquely identifies a
+WLAN BSS Interface.  The interface identified by a
+particular value of this index is the same interface as
+identified by the same value of the ifIndex.
+
+
+
+The ifIndex here is for a WLAN BSS Interface.
+The creation of a row object in the capwapDot11WlanBindTable
+triggers the AC to automatically create a WLAN BSS Interface
+identified by an ifIndex without manual intervention.
+The PHY address of the capwapDot11WlanBindBssIfIndex is the
+BSSID.  While manufacturers are free to assign BSSIDs by using
+any arbitrary mechanism, it is advised that where possible the
+BSSIDs are assigned as a contiguous block.
+When assigned as a block, implementations can still assign
+any of the available BSSIDs to any WLAN.  One possible method
+is for the WTP to assign the address using the following
+algorithm: base BSSID address + WLAN ID.""",
+            "reference" :
+                """Section 2.4 of CAPWAP Protocol Binding for IEEE 802.11,
+RFC 5416.""",
+        }, # column
+        "capwapDot11WlanBindRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "CAPWAP-DOT11-MIB",
+            "oid" : "1.3.6.1.2.1.195.1.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This variable is used to create, modify, and/or delete a row
+in this table.
+All the objects in a row can be modified only when the value
+of this object in the corresponding conceptual row is not
+'active'.  Thus, to modify one or more of the objects in
+this conceptual row:
+     a. change the row status to 'notInService',
+     b. change the values of the row
+     c. change the row status to 'active'""",
+        }, # column
+        "capwapDot11Conformance" : {
+            "nodetype" : "node",
+            "moduleName" : "CAPWAP-DOT11-MIB",
+            "oid" : "1.3.6.1.2.1.195.2",
+        }, # node
+        "capwapDot11Groups" : {
+            "nodetype" : "node",
+            "moduleName" : "CAPWAP-DOT11-MIB",
+            "oid" : "1.3.6.1.2.1.195.2.1",
+        }, # node
+        "capwapDot11Compliances" : {
+            "nodetype" : "node",
+            "moduleName" : "CAPWAP-DOT11-MIB",
+            "oid" : "1.3.6.1.2.1.195.2.2",
+        }, # node
+    }, # nodes
+
+    "groups" : {
+        "capwapDot11WlanGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "CAPWAP-DOT11-MIB",
+            "oid" : "1.3.6.1.2.1.195.2.1.1",
+            "status" : "current",
+            "members" : {
+                "capwapDot11WlanProfileIfIndex" : {
+                    "nodetype" : "member",
+                    "module" : "CAPWAP-DOT11-MIB"
+                },
+                "capwapDot11WlanMacType" : {
+                    "nodetype" : "member",
+                    "module" : "CAPWAP-DOT11-MIB"
+                },
+                "capwapDot11WlanTunnelMode" : {
+                    "nodetype" : "member",
+                    "module" : "CAPWAP-DOT11-MIB"
+                },
+                "capwapDot11WlanRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "CAPWAP-DOT11-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects that is used to configure
+the properties of a WLAN profile.""",
+        }, # group
+        "capwapDot11WlanBindGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "CAPWAP-DOT11-MIB",
+            "oid" : "1.3.6.1.2.1.195.2.1.2",
+            "status" : "current",
+            "members" : {
+                "capwapDot11WlanBindWlanId" : {
+                    "nodetype" : "member",
+                    "module" : "CAPWAP-DOT11-MIB"
+                },
+                "capwapDot11WlanBindBssIfIndex" : {
+                    "nodetype" : "member",
+                    "module" : "CAPWAP-DOT11-MIB"
+                },
+                "capwapDot11WlanBindRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "CAPWAP-DOT11-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects that is used to bind the
+WLAN profiles with a radio.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "capwapDot11Compliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "CAPWAP-DOT11-MIB",
+            "oid" : "1.3.6.1.2.1.195.2.2.1",
+            "status" : "current",
+            "description" :
+                """Describes the requirements for conformance to the
+
+
+
+CAPWAP-DOT11-MIB module.""",
+            "requires" : {
+                "capwapDot11WlanGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "CAPWAP-DOT11-MIB"
+                },
+                "capwapDot11WlanBindGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "CAPWAP-DOT11-MIB"
+                },
+            }, # requires
+        }, # compliance
+    }, # compliances
+
+}