logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/VDSL-LINE-MIB.dic

@@ -0,0 +1,4518 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python VDSL-LINE-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/VDSL-LINE-MIB"
+
+MIB = {
+    "moduleName" : "VDSL-LINE-MIB",
+
+    "VDSL-LINE-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """ADSLMIB Working Group""",
+        "contact" : 
+            """WG-email:  adslmib@ietf.org
+Info:      https://www1.ietf.org/mailman/listinfo/adslmib
+
+Chair:     Mike Sneed
+           Sand Channel Systems
+Postal:    P.O.  Box 37324
+           Raleigh, NC 27627-7324
+           USA
+Email:     sneedmike@hotmail.com
+Phone:     +1 206 600 7022
+
+Co-editor: Bob Ray
+           PESA Switching Systems, Inc.
+Postal:    330-A Wynn Drive
+           Huntsville, AL 35805
+           USA
+Email:     rray@pesa.com
+Phone:     +1 256 726 9200 ext.  142
+
+Co-editor: Rajesh Abbi
+           Alcatel USA
+Postal:    2301 Sugar Bush Road
+           Raleigh, NC 27612-3339
+           USA
+Email:     Rajesh.Abbi@alcatel.com
+Phone:     +1 919 850 6194""",
+        "description" :
+            """The MIB module defining objects for the management of a pair
+of VDSL transceivers at each end of the VDSL line.  Each such
+line has an entry in an ifTable which may include multiple
+transceiver lines.  An agent may reside at either end of the
+VDSL line.  However, the MIB is designed to require no
+management communication between them beyond that inherent in
+the low-level VDSL line protocol.  The agent may monitor and
+control this protocol for its needs.
+
+
+
+VDSL lines may support optional Fast or Interleaved channels.
+If these are supported, additional entries corresponding to the
+supported channels must be created in the ifTable.  Thus a VDSL
+line that supports both channels will have three entries in the
+ifTable, one for each physical, fast, and interleaved, whose
+ifType values are equal to vdsl(97), fast(125), and
+interleaved(124), respectively.  The ifStackTable is used to
+represent the relationship between the entries.
+
+Naming Conventions:
+    Vtuc -- (VTUC) transceiver at near (Central) end of line
+    Vtur -- (VTUR) transceiver at Remote end of line
+    Vtu  -- One of either Vtuc or Vtur
+    Curr -- Current
+    Prev -- Previous
+    Atn  -- Attenuation
+    ES   -- Errored Second.
+    SES  -- Severely Errored Second
+    UAS  -- Unavailable Second
+    LCS  -- Line Code Specific
+    Lof  -- Loss of Frame
+    Lol  -- Loss of Link
+    Los  -- Loss of Signal
+    Lpr  -- Loss of Power
+    xxxs -- Sum of Seconds in which xxx has occured
+            (e.g., xxx = Lof, Los, Lpr, Lol)
+    Max  -- Maximum
+    Mgn  -- Margin
+    Min  -- Minimum
+    Psd  -- Power Spectral Density
+    Snr  -- Signal to Noise Ratio
+    Tx   -- Transmit
+    Blks -- Blocks
+
+Copyright (C) The Internet Society (2004).  This version
+of this MIB module is part of RFC 3728: see the RFC
+itself for full legal notices.""",
+        "revisions" : (
+            {
+                "date" : "2004-02-19 00:00",
+                "description" :
+                    """Initial version, published as RFC 3728.""",
+            },
+        ),
+        "identity node" : "vdslMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "Gauge32"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "SNMPv2-SMI", "name" : "Unsigned32"},
+        {"module" : "SNMPv2-SMI", "name" : "NOTIFICATION-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "transmission"},
+        {"module" : "HCNUM-TC", "name" : "ZeroBasedCounter64"},
+        {"module" : "SNMPv2-TC", "name" : "TEXTUAL-CONVENTION"},
+        {"module" : "SNMPv2-TC", "name" : "RowStatus"},
+        {"module" : "SNMPv2-TC", "name" : "TruthValue"},
+        {"module" : "HC-PerfHist-TC-MIB", "name" : "HCPerfValidIntervals"},
+        {"module" : "HC-PerfHist-TC-MIB", "name" : "HCPerfInvalidIntervals"},
+        {"module" : "HC-PerfHist-TC-MIB", "name" : "HCPerfTimeElapsed"},
+        {"module" : "HC-PerfHist-TC-MIB", "name" : "HCPerfIntervalThreshold"},
+        {"module" : "HC-PerfHist-TC-MIB", "name" : "HCPerfCurrentCount"},
+        {"module" : "HC-PerfHist-TC-MIB", "name" : "HCPerfIntervalCount"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "SNMPv2-CONF", "name" : "NOTIFICATION-GROUP"},
+        {"module" : "IF-MIB", "name" : "ifIndex"},
+        {"module" : "SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+    ),
+
+    "typedefs" : {
+        "VdslLineCodingType" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "other" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "mcm" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "scm" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "description" :
+                """This data type is used as the syntax for the VDSL Line
+Code.  Attributes with this syntax identify the line coding
+used.  Specified as an INTEGER, the three values are:
+
+other(1)  -- none of the following
+mcm(2)    -- Multiple Carrier Modulation
+scm(3)    -- Single Carrier Modulation""",
+        },
+        "VdslLineEntity" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "vtuc" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "vtur" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "description" :
+                """Identifies a transceiver as being either Vtuc or Vtur.
+A VDSL line consists of two transceivers, a Vtuc and a
+Vtur.  Attributes with this syntax reference the two sides
+of a line.  Specified as an INTEGER, the two values are:
+
+vtuc(1)  -- central site transceiver
+vtur(2)  -- remote site transceiver""",
+        },
+    }, # typedefs
+
+    "nodes" : {
+        "vdslMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97",
+            "status" : "current",
+        }, # node
+        "vdslLineMib" : {
+            "nodetype" : "node",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1",
+        }, # node
+        "vdslNotifications" : {
+            "nodetype" : "node",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.0",
+        }, # node
+        "vdslMibObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1",
+        }, # node
+        "vdslLineTable" : {
+            "nodetype" : "table",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.1",
+            "status" : "current",
+            "description" :
+                """This table includes common attributes describing
+both ends of the line.  It is required for all VDSL
+physical interfaces.  VDSL physical interfaces are
+those ifEntries where ifType is equal to vdsl(97).""",
+        }, # table
+        "vdslLineEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.1.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+            ],
+            "description" :
+                """An entry in the vdslLineTable.""",
+        }, # row
+        "vdslLineCoding" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"VDSL-LINE-MIB", "name" : "VdslLineCodingType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Specifies the VDSL coding type used on this line.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslLineType" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "noChannel" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "fastOnly" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "interleavedOnly" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "fastOrInterleaved" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "fastAndInterleaved" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Defines the type of VDSL physical line entity that exists,
+by defining whether and how the line is channelized.  If
+
+
+
+
+
+
+
+
+
+the line is channelized,  the value will be other than
+noChannel(1).  This object defines which channel type(s)
+are supported.  Defined values are:
+
+noChannel(1)          -- no channels exist
+fastOnly(2)           -- only fast channel exists
+interleavedOnly(3)    -- only interleaved channel exists
+fastOrInterleaved(4)  -- either fast or interleaved channel
+                      -- exist, but only one at a time
+fastAndInterleaved(5) -- both fast and interleaved channels
+                      -- exist
+
+Note that 'slow' and 'interleaved' refer to the same
+channel.  In the case that the line is channelized, the
+manager can use the ifStackTable to determine the ifIndex
+for the associated channel(s).""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslLineConfProfile" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMP-FRAMEWORK-MIB",
+                        "type" : "SnmpAdminString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "DEFVAL",
+            "description" :
+                """The value of this object identifies the row in the VDSL
+Line Configuration Profile Table, vdslLineConfProfileTable,
+which applies for this VDSL line, and channels if
+applicable.
+
+This object MUST be maintained in a persistent manner.""",
+        }, # column
+        "vdslLineAlarmConfProfile" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMP-FRAMEWORK-MIB",
+                        "type" : "SnmpAdminString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "DEFVAL",
+            "description" :
+                """The value of this object identifies the row in the VDSL
+Line Alarm Configuration Profile Table,
+vdslLineAlarmConfProfileTable, which applies to this
+VDSL line, and channels if applicable.
+
+This object MUST be maintained in a persistent manner.""",
+        }, # column
+        "vdslPhysTable" : {
+            "nodetype" : "table",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.2",
+            "status" : "current",
+            "description" :
+                """This table provides one row for each Vtu.  Each row
+contains the Physical Layer Parameters table for that
+Vtu.  VDSL physical interfaces are those ifEntries where
+ifType is equal to vdsl(97).""",
+        }, # table
+        "vdslPhysEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.2.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "vdslPhysSide",
+            ],
+            "description" :
+                """An entry in the vdslPhysTable.""",
+        }, # row
+        "vdslPhysSide" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"VDSL-LINE-MIB", "name" : "VdslLineEntity"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """Identifies whether the transceiver is the Vtuc or Vtur.""",
+        }, # column
+        "vdslPhysInvSerialNumber" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMP-FRAMEWORK-MIB",
+                        "type" : "SnmpAdminString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "32"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "32"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The vendor specific string that identifies the
+
+
+
+vendor equipment.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPhysInvVendorID" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMP-FRAMEWORK-MIB",
+                        "type" : "SnmpAdminString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "16"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "16"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The vendor ID code is a copy of the binary vendor
+identification field expressed as readable characters
+in hexadecimal notation.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPhysInvVersionNumber" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMP-FRAMEWORK-MIB",
+                        "type" : "SnmpAdminString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "16"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "16"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The vendor specific version number sent by this Vtu
+as part of the initialization messages.  It is a copy
+of the binary version number field expressed as
+readable characters in hexadecimal notation.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPhysCurrSnrMgn" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-127",
+                        "max" : "127"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-127",
+                        "max" : "127"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "0.25dBm",
+            "description" :
+                """Noise Margin as seen by this Vtu with respect to its
+received signal in 0.25dB.  The effective range is
+-31.75 to +31.75 dB.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPhysCurrAtn" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.2.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "parent module" : {
+                        "name" : "SNMPv2-SMI",
+                        "type" : "Gauge32",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "0.25dBm",
+            "description" :
+                """Measured difference in the total power transmitted by
+the peer Vtu and the total power received by this Vtu.
+The effective range is 0 to +63.75 dB.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPhysCurrStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.2.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Bits",
+                    "noDefect" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "lossOfFraming" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "lossOfSignal" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "lossOfPower" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "lossOfSignalQuality" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "lossOfLink" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "dataInitFailure" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "configInitFailure" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                    "protocolInitFailure" : {
+                        "nodetype" : "namednumber",
+                        "number" : "8"
+                    },
+                    "noPeerVtuPresent" : {
+                        "nodetype" : "namednumber",
+                        "number" : "9"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Indicates current state of the Vtu line.  This is a
+bit-map of possible conditions.  The various bit
+positions are:
+
+0   noDefect             There are no defects on the line.
+
+1   lossOfFraming        Vtu failure due to not receiving
+                         a valid frame.
+
+2   lossOfSignal         Vtu failure due to not receiving
+                         signal.
+
+3   lossOfPower          Vtu failure due to loss of power.
+
+4   lossOfSignalQuality  Loss of Signal Quality is declared
+                         when the Noise Margin falls below
+                         the Minimum Noise Margin, or the
+                         bit-error-rate exceeds 10^-7.
+
+5   lossOfLink           Vtu failure due to inability to
+                         link with peer Vtu.  Set whenever
+                         the transceiver is in the 'Warm
+                         Start' state.
+
+6   dataInitFailure      Vtu failure during initialization
+                         due to bit errors corrupting
+                         startup exchange data.
+
+
+
+
+7   configInitFailure    Vtu failure during initialization
+                         due to peer Vtu not able to
+                         support requested configuration.
+
+8   protocolInitFailure  Vtu failure during initialization
+                         due to incompatible protocol used
+                         by the peer Vtu.
+
+9   noPeerVtuPresent     Vtu failure during initialization
+                         due to no activation sequence
+                         detected from peer Vtu.
+
+This is intended to supplement ifOperStatus.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPhysCurrOutputPwr" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.2.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "160"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "160"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "0.1dBm",
+            "description" :
+                """Measured total output power transmitted by this VTU.
+This is the measurement that was reported during
+the last activation sequence.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPhysCurrAttainableRate" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.2.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Gauge32"},
+            },
+            "access" : "readonly",
+            "units" : "kbps",
+            "description" :
+                """Indicates the maximum currently attainable data rate
+in steps of 1000 bits/second by the Vtu.  This value
+will be equal to or greater than vdslPhysCurrLineRate.
+Note that for SCM, the minimum and maximum data rates
+are equal.  Note: 1 kbps = 1000 bps.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPhysCurrLineRate" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.2.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Gauge32"},
+            },
+            "access" : "readonly",
+            "units" : "kbps",
+            "description" :
+                """Indicates the current data rate in steps of 1000
+bits/second by the Vtu.  This value will be less than
+or equal to vdslPhysCurrAttainableRate.  Note: 1 kbps =
+1000 bps.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslChanTable" : {
+            "nodetype" : "table",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.3",
+            "status" : "current",
+            "description" :
+                """This table provides one row for each Vtu channel.
+VDSL channel interfaces are those ifEntries where
+ifType is equal to interleave(124) or fast(125).""",
+        }, # table
+        "vdslChanEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.3.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "vdslPhysSide",
+            ],
+            "description" :
+                """An entry in the vdslChanTable.""",
+        }, # row
+        "vdslChanInterleaveDelay" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Gauge32"},
+            },
+            "access" : "readonly",
+            "units" : "milliseconds",
+            "description" :
+                """Interleave Delay for this channel.
+
+Interleave delay applies only to the interleave
+(slow) channel and defines the mapping (relative
+spacing) between subsequent input bytes at the
+
+
+
+interleaver input and their placement in the bit
+stream at the interleaver output.  Larger numbers
+provide greater separation between consecutive
+input bytes in the output bit stream allowing for
+improved impulse noise immunity at the expense of
+payload latency.
+
+In the case where the ifType is fast(125), return
+a value of zero.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslChanCrcBlockLength" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Gauge32"},
+            },
+            "access" : "readonly",
+            "units" : "bytes",
+            "description" :
+                """Indicates the length of the channel data-block
+on which the CRC operates.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslChanCurrTxRate" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Gauge32"},
+            },
+            "access" : "readonly",
+            "units" : "kbps",
+            "description" :
+                """Actual transmit data rate on this channel.  Note: 1
+kbps = 1000 bps.""",
+        }, # column
+        "vdslChanCurrTxSlowBurstProtect" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.3.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "parent module" : {
+                        "name" : "SNMPv2-SMI",
+                        "type" : "Gauge32",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "1275"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "1275"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "microseconds",
+            "description" :
+                """Actual level of impulse noise (burst) protection
+for an interleaved (slow) channel.  This parameter is
+not applicable to fast channels.  For fast channels,
+a value of zero shall be returned.""",
+            "reference" :
+                """ITU-T G.997.1, section 7.3.2.3""",
+        }, # column
+        "vdslChanCurrTxFastFec" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.3.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "parent module" : {
+                        "name" : "SNMPv2-SMI",
+                        "type" : "Gauge32",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "50"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "50"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "%",
+            "description" :
+                """Actual Forward Error Correction (FEC) redundancy
+related overhead for a fast channel.  This parameter
+is not applicable to an interleaved (slow) channel.
+For interleaved channels, a value of zero shall be
+returned.""",
+        }, # column
+        "vdslPerfDataTable" : {
+            "nodetype" : "table",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4",
+            "status" : "current",
+            "description" :
+                """This table provides one row for each VDSL physical
+interface.  VDSL physical interfaces are those ifEntries
+where ifType is equal to vdsl(97).""",
+        }, # table
+        "vdslPerfDataEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "vdslPhysSide",
+            ],
+            "description" :
+                """An entry in the vdslPerfDataTable.""",
+        }, # row
+        "vdslPerfDataValidIntervals" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfValidIntervals"},
+            },
+            "access" : "readonly",
+            "units" : "intervals",
+            "description" :
+                """Valid Intervals per definition found in
+HC-PerfHist-TC-MIB.""",
+        }, # column
+        "vdslPerfDataInvalidIntervals" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfInvalidIntervals"},
+            },
+            "access" : "readonly",
+            "units" : "intervals",
+            "description" :
+                """Invalid Intervals per definition found in
+HC-PerfHist-TC-MIB.""",
+        }, # column
+        "vdslPerfDataLofs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of seconds since the unit was last reset that there
+was Loss of Framing.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPerfDataLoss" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of seconds since the unit was last reset that there
+was Loss of Signal.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPerfDataLprs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of seconds since the unit was last reset that there
+was Loss of Power.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPerfDataLols" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of seconds since the unit was last reset that there
+was Loss of Link.""",
+        }, # column
+        "vdslPerfDataESs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Errored Seconds since the unit was last reset.
+An Errored Second is a one-second interval containing one
+or more CRC anomalies, or one or more LOS or LOF defects.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPerfDataSESs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Severely Errored Seconds since the unit was last
+reset.""",
+        }, # column
+        "vdslPerfDataUASs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Unavailable Seconds since the unit was last
+reset.""",
+        }, # column
+        "vdslPerfDataInits" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "occurrences",
+            "description" :
+                """Count of the line initialization attempts since the unit
+was last reset.  This count includes both successful and
+failed attempts.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPerfDataCurr15MinTimeElapsed" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfTimeElapsed"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Total elapsed seconds in this interval.""",
+        }, # column
+        "vdslPerfDataCurr15MinLofs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfCurrentCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of seconds during this interval that there
+was Loss of Framing.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPerfDataCurr15MinLoss" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfCurrentCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of seconds during this interval that there
+was Loss of Signal.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPerfDataCurr15MinLprs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfCurrentCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of seconds during this interval that there
+was Loss of Power.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPerfDataCurr15MinLols" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfCurrentCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of seconds during this interval that there
+was Loss of Link.""",
+        }, # column
+        "vdslPerfDataCurr15MinESs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfCurrentCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Errored Seconds during this interval.  An Errored
+Second is a one-second interval containing one or more CRC
+anomalies, or one or more LOS or LOF defects.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPerfDataCurr15MinSESs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.17",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfCurrentCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Severely Errored Seconds during this interval.""",
+        }, # column
+        "vdslPerfDataCurr15MinUASs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.18",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfCurrentCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Unavailable Seconds during this interval.""",
+        }, # column
+        "vdslPerfDataCurr15MinInits" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.19",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfCurrentCount"},
+            },
+            "access" : "readonly",
+            "units" : "occurrences",
+            "description" :
+                """Count of the line initialization attempts during this
+interval.  This count includes both successful and
+failed attempts.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPerfData1DayValidIntervals" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.20",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfValidIntervals"},
+            },
+            "access" : "readonly",
+            "units" : "intervals",
+            "description" :
+                """Valid Intervals per definition found in
+HC-PerfHist-TC-MIB.""",
+        }, # column
+        "vdslPerfData1DayInvalidIntervals" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.21",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfInvalidIntervals"},
+            },
+            "access" : "readonly",
+            "units" : "intervals",
+            "description" :
+                """Invalid Intervals per definition found in
+HC-PerfHist-TC-MIB.""",
+        }, # column
+        "vdslPerfDataCurr1DayTimeElapsed" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.22",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfTimeElapsed"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Number of seconds that have elapsed since the beginning
+of the current 1-day interval.""",
+        }, # column
+        "vdslPerfDataCurr1DayLofs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.23",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Loss of Framing (LOF) Seconds since the
+beginning of the current 1-day interval.""",
+        }, # column
+        "vdslPerfDataCurr1DayLoss" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.24",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Loss of Signal (LOS) Seconds since the beginning
+of the current 1-day interval.""",
+        }, # column
+        "vdslPerfDataCurr1DayLprs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.25",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Loss of Power (LPR) Seconds since the beginning
+of the current 1-day interval.""",
+        }, # column
+        "vdslPerfDataCurr1DayLols" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.26",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Loss of Link (LOL) Seconds since the beginning
+of the current 1-day interval.""",
+        }, # column
+        "vdslPerfDataCurr1DayESs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.27",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Errored Seconds (ES) since the beginning
+of the current 1-day interval.""",
+        }, # column
+        "vdslPerfDataCurr1DaySESs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.28",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Severely Errored Seconds (SES) since the
+beginning of the current 1-day interval.""",
+        }, # column
+        "vdslPerfDataCurr1DayUASs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.29",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Unavailable Seconds (UAS) since the beginning
+of the current 1-day interval.""",
+        }, # column
+        "vdslPerfDataCurr1DayInits" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.4.1.30",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of the line initialization attempts since the
+beginning of the current 1-day interval.  This count
+includes both successful and failed attempts.""",
+        }, # column
+        "vdslPerfIntervalTable" : {
+            "nodetype" : "table",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.5",
+            "status" : "current",
+            "description" :
+                """This table provides one row for each Vtu performance
+data collection interval.  VDSL physical interfaces are
+
+
+
+those ifEntries where ifType is equal to vdsl(97).""",
+        }, # table
+        "vdslPerfIntervalEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.5.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "vdslPhysSide",
+                "vdslPerfIntervalNumber",
+            ],
+            "description" :
+                """An entry in the vdslPerfIntervalTable.""",
+        }, # row
+        "vdslPerfIntervalNumber" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.5.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "96"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "96"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """Performance Data Interval number 1 is the most recent
+previous interval; interval 96 is 24 hours ago.
+Intervals 2 to 96 are optional.""",
+        }, # column
+        "vdslPerfIntervalLofs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.5.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfIntervalCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of seconds in the interval when there was Loss
+of Framing.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPerfIntervalLoss" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.5.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfIntervalCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of seconds in the interval when there was Loss
+of Signal.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPerfIntervalLprs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.5.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfIntervalCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of seconds in the interval when there was Loss
+of Power.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPerfIntervalLols" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.5.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfIntervalCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of seconds in the interval when there was Loss
+of Link.""",
+        }, # column
+        "vdslPerfIntervalESs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.5.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfIntervalCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Errored Seconds (ES) in the interval.  An Errored
+Second is a one-second interval containing one or more CRC
+anomalies, one or more LOS or LOF defects.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPerfIntervalSESs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.5.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfIntervalCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Severely Errored Seconds in the interval.""",
+        }, # column
+        "vdslPerfIntervalUASs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.5.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfIntervalCount"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Unavailable Seconds in the interval.""",
+        }, # column
+        "vdslPerfIntervalInits" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.5.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfIntervalCount"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Count of the line initialization attempts during this
+interval.  This count includes both successful and
+failed attempts.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPerf1DayIntervalTable" : {
+            "nodetype" : "table",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.6",
+            "status" : "current",
+            "description" :
+                """This table provides one row for each VDSL performance
+data collection interval.  This table contains live data
+from equipment.  As such, it is NOT persistent.""",
+        }, # table
+        "vdslPerf1DayIntervalEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.6.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "vdslPhysSide",
+                "vdslPerf1DayIntervalNumber",
+            ],
+            "description" :
+                """An entry in the vdslPerf1DayIntervalTable.""",
+        }, # row
+        "vdslPerf1DayIntervalNumber" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.6.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "30"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "30"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """History Data Interval number.  Interval 1 is the most
+recent previous day; interval 30 is 30 days ago.  Intervals
+2 to 30 are optional.""",
+        }, # column
+        "vdslPerf1DayIntervalMoniSecs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.6.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfTimeElapsed"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """The amount of time in the 1-day interval over which the
+performance monitoring information is actually counted.
+This value will be the same as the interval duration except
+in a situation where performance monitoring data could not
+be collected for any reason.""",
+        }, # column
+        "vdslPerf1DayIntervalLofs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.6.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Loss of Frame (LOF) Seconds during the 1-day
+interval as measured by vdslPerf1DayIntervalMoniSecs.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPerf1DayIntervalLoss" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.6.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Loss of Signal (LOS) Seconds during the 1-day
+interval as measured by vdslPerf1DayIntervalMoniSecs.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPerf1DayIntervalLprs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.6.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Loss of Power (LPR) Seconds during the 1-day
+interval as measured by vdslPerf1DayIntervalMoniSecs.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPerf1DayIntervalLols" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.6.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Loss of Link (LOL) Seconds during the 1-day
+interval as measured by vdslPerf1DayIntervalMoniSecs.""",
+        }, # column
+        "vdslPerf1DayIntervalESs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.6.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Errored Seconds (ES) during the 1-day
+interval as measured by vdslPerf1DayIntervalMoniSecs.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslPerf1DayIntervalSESs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.6.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Severely Errored Seconds (SES) during the 1-day
+interval as measured by vdslPerf1DayIntervalMoniSecs.""",
+        }, # column
+        "vdslPerf1DayIntervalUASs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.6.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of Unavailable Seconds (UAS) during the 1-day
+interval as measured by vdslPerf1DayIntervalMoniSecs.""",
+        }, # column
+        "vdslPerf1DayIntervalInits" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.6.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Count of the line initialization attempts during the
+1-day interval as measured by vdslPerf1DayIntervalMoniSecs.
+This count includes both successful and failed attempts.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslChanPerfDataTable" : {
+            "nodetype" : "table",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.7",
+            "status" : "current",
+            "description" :
+                """This table provides one row for each Vtu channel.
+VDSL channel interfaces are those ifEntries where
+ifType is equal to interleave(124) or fast(125).""",
+        }, # table
+        "vdslChanPerfDataEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.7.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "vdslPhysSide",
+            ],
+            "description" :
+                """An entry in the vdslChanPerfDataTable.""",
+        }, # row
+        "vdslChanValidIntervals" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.7.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfValidIntervals"},
+            },
+            "access" : "readonly",
+            "units" : "intervals",
+            "description" :
+                """Valid Intervals per definition found in
+HC-PerfHist-TC-MIB.""",
+        }, # column
+        "vdslChanInvalidIntervals" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.7.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfInvalidIntervals"},
+            },
+            "access" : "readonly",
+            "units" : "intervals",
+            "description" :
+                """Invalid Intervals per definition found in
+HC-PerfHist-TC-MIB.""",
+        }, # column
+        "vdslChanFixedOctets" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.7.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HCNUM-TC", "name" : "ZeroBasedCounter64"},
+            },
+            "access" : "readonly",
+            "units" : "octets",
+            "description" :
+                """Count of corrected octets since the unit was last reset.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslChanBadBlks" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.7.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HCNUM-TC", "name" : "ZeroBasedCounter64"},
+            },
+            "access" : "readonly",
+            "units" : "blocks",
+            "description" :
+                """Count of uncorrectable blocks since the unit was last
+reset.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslChanCurr15MinTimeElapsed" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.7.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfTimeElapsed"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Total elapsed seconds in this interval.""",
+        }, # column
+        "vdslChanCurr15MinFixedOctets" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.7.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfCurrentCount"},
+            },
+            "access" : "readonly",
+            "units" : "octets",
+            "description" :
+                """Count of corrected octets in this interval.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslChanCurr15MinBadBlks" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.7.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfCurrentCount"},
+            },
+            "access" : "readonly",
+            "units" : "blocks",
+            "description" :
+                """Count of uncorrectable blocks in this interval.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslChan1DayValidIntervals" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.7.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfValidIntervals"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Valid Intervals per definition found in
+HC-PerfHist-TC-MIB.""",
+        }, # column
+        "vdslChan1DayInvalidIntervals" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.7.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfInvalidIntervals"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Invalid Intervals per definition found in
+HC-PerfHist-TC-MIB.""",
+        }, # column
+        "vdslChanCurr1DayTimeElapsed" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.7.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfTimeElapsed"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """Number of seconds that have elapsed since the beginning
+of the current 1-day interval.""",
+        }, # column
+        "vdslChanCurr1DayFixedOctets" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.7.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfCurrentCount"},
+            },
+            "access" : "readonly",
+            "units" : "octets",
+            "description" :
+                """Count of corrected octets since the beginning of the
+current 1-day interval.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslChanCurr1DayBadBlks" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.7.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfCurrentCount"},
+            },
+            "access" : "readonly",
+            "units" : "blocks",
+            "description" :
+                """Count of uncorrectable blocks since the beginning of the
+current 1-day interval.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslChanIntervalTable" : {
+            "nodetype" : "table",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.8",
+            "status" : "current",
+            "description" :
+                """This table provides one row for each Vtu channel data
+collection interval.  VDSL channel interfaces are those
+ifEntries where ifType is equal to interleave(124) or
+fast(125).""",
+        }, # table
+        "vdslChanIntervalEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.8.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "vdslPhysSide",
+                "vdslChanIntervalNumber",
+            ],
+            "description" :
+                """An entry in the vdslChanIntervalTable.""",
+        }, # row
+        "vdslChanIntervalNumber" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.8.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "96"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "96"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """Performance Data Interval number 1 is the most recent
+previous interval; interval 96 is 24 hours ago.
+Intervals 2 to 96 are optional.""",
+        }, # column
+        "vdslChanIntervalFixedOctets" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.8.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfIntervalCount"},
+            },
+            "access" : "readonly",
+            "units" : "octets",
+            "description" :
+                """Count of corrected octets in this interval.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslChanIntervalBadBlks" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.8.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfIntervalCount"},
+            },
+            "access" : "readonly",
+            "units" : "blocks",
+            "description" :
+                """Count of uncorrectable blocks in this interval.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslChan1DayIntervalTable" : {
+            "nodetype" : "table",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.9",
+            "status" : "current",
+            "description" :
+                """This table provides one row for each VDSL performance
+data collection interval.  This table contains live data
+from equipment.  As such, it is NOT persistent.""",
+        }, # table
+        "vdslChan1DayIntervalEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.9.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "vdslPhysSide",
+                "vdslChan1DayIntervalNumber",
+            ],
+            "description" :
+                """An entry in the vdslChan1DayIntervalTable.""",
+        }, # row
+        "vdslChan1DayIntervalNumber" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.9.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "30"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "30"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """History Data Interval number.  Interval 1 is the most
+recent previous day; interval 30 is 30 days ago.  Intervals
+2 to 30 are optional.""",
+        }, # column
+        "vdslChan1DayIntervalMoniSecs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.9.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfTimeElapsed"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """The amount of time in the 1-day interval over which the
+performance monitoring information is actually counted.
+This value will be the same as the interval duration except
+in a situation where performance monitoring data could not
+be collected for any reason.""",
+        }, # column
+        "vdslChan1DayIntervalFixedOctets" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.9.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfCurrentCount"},
+            },
+            "access" : "readonly",
+            "units" : "octets",
+            "description" :
+                """Count of corrected octets in this interval.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslChan1DayIntervalBadBlks" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.9.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfCurrentCount"},
+            },
+            "access" : "readonly",
+            "units" : "blocks",
+            "description" :
+                """Count of uncorrectable blocks in this interval.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslLineConfProfileTable" : {
+            "nodetype" : "table",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11",
+            "status" : "current",
+            "description" :
+                """This table contains information on the VDSL line
+configuration.  One entry in this table reflects a
+profile defined by a manager which can be used to
+configure the VDSL line.
+
+Entries in this table MUST be maintained in a
+persistent manner.""",
+        }, # table
+        "vdslLineConfProfileEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "vdslLineConfProfileName",
+            ],
+            "description" :
+                """Each entry consists of a list of parameters that
+represents the configuration of a VDSL line.
+
+A default profile with an index of 'DEFVAL', will
+always exist and its parameters will be set to vendor
+specific values, unless otherwise specified in this
+document.""",
+        }, # row
+        "vdslLineConfProfileName" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMP-FRAMEWORK-MIB",
+                        "type" : "SnmpAdminString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """This object identifies a row in this table.
+
+A default profile with an index of 'DEFVAL', will
+always exist and its parameters will be set to vendor
+specific values, unless otherwise specified in this
+document.""",
+        }, # column
+        "vdslLineConfDownRateMode" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "manual" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "adaptAtInit" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "adaptAtInit",
+            "description" :
+                """Specifies the rate selection behavior for the line
+in the downstream direction.
+
+manual(1)       forces the rate to the configured rate
+adaptAtInit(2)  adapts the line based upon line quality.""",
+        }, # column
+        "vdslLineConfUpRateMode" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "manual" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "adaptAtInit" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "adaptAtInit",
+            "description" :
+                """Specifies the rate selection behavior for the line
+in the upstream direction.
+
+manual(1)       forces the rate to the configured rate
+adaptAtInit(2)  adapts the line based upon line quality.""",
+        }, # column
+        "vdslLineConfDownMaxPwr" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "58"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "58"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "0.25dBm",
+            "description" :
+                """Specifies the maximum aggregate downstream power
+level in the range 0 to 14.5 dBm.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslLineConfUpMaxPwr" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "58"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "58"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "0.25dBm",
+            "description" :
+                """Specifies the maximum aggregate upstream power
+level in the range 0 to 14.5 dBm.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslLineConfDownMaxSnrMgn" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "127"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "127"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "0.25dBm",
+            "description" :
+                """Specifies the maximum downstream Signal/Noise Margin
+in units of 0.25 dB, for a range of 0 to 31.75 dB.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslLineConfDownMinSnrMgn" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "127"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "127"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "0.25dBm",
+            "description" :
+                """Specifies the minimum downstream Signal/Noise Margin
+in units of 0.25 dB, for a range of 0 to 31.75 dB.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslLineConfDownTargetSnrMgn" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "127"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "127"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "0.25dBm",
+            "description" :
+                """Specifies the target downstream Signal/Noise Margin
+in units of 0.25 dB, for a range of 0 to 31.75 dB.
+This is the Noise Margin the transceivers must achieve
+with a BER of 10^-7 or better to successfully complete
+initialization.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslLineConfUpMaxSnrMgn" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "127"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "127"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "0.25dBm",
+            "description" :
+                """Specifies the maximum upstream Signal/Noise Margin
+in units of 0.25 dB, for a range of 0 to 31.75 dB.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslLineConfUpMinSnrMgn" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "127"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "127"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "0.25dBm",
+            "description" :
+                """Specifies the minimum upstream Signal/Noise Margin
+in units of 0.25 dB, for a range of 0 to 31.75 dB.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslLineConfUpTargetSnrMgn" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "127"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "127"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "0.25dBm",
+            "description" :
+                """Specifies the target upstream Signal/Noise Margin in
+units of 0.25 dB, for a range of 0 to 31.75 dB.  This
+is the Noise Margin the transceivers must achieve with
+a BER of 10^-7 or better to successfully complete
+initialization.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslLineConfDownFastMaxDataRate" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "kbps",
+            "description" :
+                """Specifies the maximum downstream fast channel
+data rate in steps of 1000 bits/second.""",
+        }, # column
+        "vdslLineConfDownFastMinDataRate" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "kbps",
+            "description" :
+                """Specifies the minimum downstream fast channel
+data rate in steps of 1000 bits/second.""",
+        }, # column
+        "vdslLineConfDownSlowMaxDataRate" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "kbps",
+            "description" :
+                """Specifies the maximum downstream slow channel
+data rate in steps of 1000 bits/second.
+
+The maximum aggregate downstream transmit speed
+of the line can be derived from the sum of maximum
+downstream fast and slow channel data rates.""",
+        }, # column
+        "vdslLineConfDownSlowMinDataRate" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "kbps",
+            "description" :
+                """Specifies the minimum downstream slow channel
+data rate in steps of 1000 bits/second.
+
+The minimum aggregate downstream transmit speed
+of the line can be derived from the sum of minimum
+downstream fast and slow channel data rates.""",
+        }, # column
+        "vdslLineConfUpFastMaxDataRate" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "kbps",
+            "description" :
+                """Specifies the maximum upstream fast channel
+data rate in steps of 1000 bits/second.
+
+The maximum aggregate upstream transmit speed
+of the line can be derived from the sum of maximum
+upstream fast and slow channel data rates.""",
+        }, # column
+        "vdslLineConfUpFastMinDataRate" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.17",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "kbps",
+            "description" :
+                """Specifies the minimum upstream fast channel
+data rate in steps of 1000 bits/second.
+
+
+
+The minimum aggregate upstream transmit speed
+of the line can be derived from the sum of minimum
+upstream fast and slow channel data rates.""",
+        }, # column
+        "vdslLineConfUpSlowMaxDataRate" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.18",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "kbps",
+            "description" :
+                """Specifies the maximum upstream slow channel
+data rate in steps of 1000 bits/second.""",
+        }, # column
+        "vdslLineConfUpSlowMinDataRate" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.19",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "kbps",
+            "description" :
+                """Specifies the minimum upstream slow channel
+data rate in steps of 1000 bits/second.""",
+        }, # column
+        "vdslLineConfDownRateRatio" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.20",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "100"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "100"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "percent",
+            "description" :
+                """For dynamic rate adaptation at startup, the allocation
+of data rate in excess of the minimum data rate for each
+channel is controlled by the object.  This object specifies
+the ratio of the allocation of the excess data rate between
+the fast and the slow channels.  This allocation represents
+downstream Fast Channel Allocation / Slow Channel
+Allocation.""",
+        }, # column
+        "vdslLineConfUpRateRatio" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.21",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "100"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "100"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "percent",
+            "description" :
+                """For dynamic rate adaptation at startup, the allocation
+of data rate in excess of the minimum data rate for each
+channel is controlled by the object.  This object specifies
+the ratio of the allocation of the excess data rate between
+the fast and the slow channels.  This allocation represents
+upstream Fast Channel Allocation/Slow Channel Allocation.""",
+        }, # column
+        "vdslLineConfDownMaxInterDelay" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.22",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "milliseconds",
+            "description" :
+                """Specifies the maximum interleave delay for the
+downstream slow channel.""",
+        }, # column
+        "vdslLineConfUpMaxInterDelay" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.23",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "milliseconds",
+            "description" :
+                """Specifies the maximum interleave delay for the
+upstream slow channel.""",
+        }, # column
+        "vdslLineConfDownPboControl" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.24",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "disabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "auto" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "manual" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "disabled",
+            "description" :
+                """Downstream power backoff (PBO) control for this
+line.  For transceivers which do not support downstream
+PBO control, this object MUST be fixed at disabled(1).
+If auto(2) is selected, the transceiver will automatically
+adjust the power backoff.  If manual(3) is selected,
+
+
+
+then the transceiver will use the value from
+vdslLineConfDownPboLevel.""",
+        }, # column
+        "vdslLineConfUpPboControl" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.25",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "disabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "auto" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "manual" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "disabled",
+            "description" :
+                """Upstream power backoff (PBO) control for this
+line.  For transceivers which do not support upstream
+PBO control, this object MUST be fixed at disabled(1).
+If auto(2) is selected, the transceiver will automatically
+adjust the power backoff.  If manual(3) is selected,
+then the transceiver will use the value from
+vdslLineConfUpPboLevel.""",
+        }, # column
+        "vdslLineConfDownPboLevel" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.26",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "160"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "160"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "0.25dB",
+            "description" :
+                """Specifies the downstream backoff level to be used
+when vdslLineConfDownPboControl = manual(3).""",
+        }, # column
+        "vdslLineConfUpPboLevel" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.27",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "160"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "160"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "0.25dB",
+            "description" :
+                """Specifies the upstream backoff level to be used
+when vdslLineConfUpPboControl = manual(3).""",
+        }, # column
+        "vdslLineConfDeploymentScenario" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.28",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "fttCab" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "fttEx" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "other" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "fttCab",
+            "description" :
+                """The VDSL line deployment scenario.  When using
+fttCab(1), the VTU-C is located in a street cabinet.
+When using fttEx(2), the VTU-C is located at the
+central office.  Changes to this value will have
+no effect on the transceiver.""",
+            "reference" :
+                """DSL Forum TR-057""",
+        }, # column
+        "vdslLineConfAdslPresence" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.29",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "none" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "adslOverPots" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "adslOverISDN" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "none",
+            "description" :
+                """Indicates presence of ADSL service in the associated
+cable bundle/binder.
+
+none(1)         indicates no ADSL service in the bundle
+adslOverPots(2) indicates ADSL service over POTS is
+                present in the bundle
+adslOverISDN(3) indicates ADSL service over ISDN is
+                present in the bundle""",
+        }, # column
+        "vdslLineConfApplicableStandard" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.30",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "ansi" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "etsi" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "itu" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "other" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "ansi",
+            "description" :
+                """The VDSL standard to be used for the line.
+
+ansi(1)      indicates ANSI standard
+etsi(2)      indicates ETSI standard
+itu(3)       indicates ITU standard
+other(4)     indicates a standard other than the above.""",
+        }, # column
+        "vdslLineConfBandPlan" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.31",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "bandPlan997" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "bandPlan998" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "bandPlanFx" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "other" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "bandPlan997",
+            "description" :
+                """The VDSL band plan to be used for the line.
+
+bandPlan997(1) is to be used for
+     ITU-T G.993.1 Bandplan-B
+     ETSI Bandplan
+     ANSI Plan 997
+
+bandPlan998(2) is to be used for
+     ITU-T G.993.1 Bandplan-A
+     ANSI Plan 998
+
+bandPlanFx(3) is to be used for
+     ITU-T G.993.1 Bandplan-C.
+
+other(4) is to be used for
+     non-standard bandplans.
+
+If this object is set to bandPlanFx(3), then the
+object vdslLineConfBandPlanFx MUST also be set.""",
+        }, # column
+        "vdslLineConfBandPlanFx" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.32",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "3750",
+                        "max" : "12000"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "3750",
+                        "max" : "12000"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "3750",
+            "units" : "kHz",
+            "description" :
+                """The frequency limit between bands D2 and U2 when
+vdslLineConfBandPlan is set to bandPlanFx(3).""",
+        }, # column
+        "vdslLineConfBandOptUsage" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.33",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "unused" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "upstream" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "downstream" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "unused",
+            "description" :
+                """Defines the VDSL link use of the optional frequency
+range [25kHz - 138kHz] (Opt).
+
+unused(1)     indicates Opt is unused
+upstream(2)   indicates Opt usage is for upstream
+downstream(3) indicates Opt usage is for downstream.""",
+            "reference" :
+                """ITU-T G.993.1, section 6.1""",
+        }, # column
+        "vdslLineConfUpPsdTemplate" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.34",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "templateMask1" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "templateMask2" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "templateMask1",
+            "description" :
+                """The upstream PSD template to be used for the line.
+Here, templateMask1(1) refers to a notched mask that
+limits the transmitted PSD within the internationally
+standardized HAM (Handheld Amateur Radio) radio bands,
+while templateMask2(2) refers to an unnotched mask.
+
+The masks themselves depend upon the applicable
+standard being used (vdslLineConfApplicableStandard).""",
+            "reference" :
+                """DSL TR-057""",
+        }, # column
+        "vdslLineConfDownPsdTemplate" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.35",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "templateMask1" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "templateMask2" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "templateMask1",
+            "description" :
+                """The downstream PSD template to be used for the line.
+Here, templateMask1(1) refers to a notched mask that
+limits the transmitted PSD within the internationally
+standardized HAM (Handheld Amateur Radio) radio bands,
+while templateMask2(2) refers to an unnotched mask.
+
+The masks themselves depend upon the applicable
+standard being used (vdslLineConfApplicableStandard).""",
+            "reference" :
+                """DSL TR-057""",
+        }, # column
+        "vdslLineConfHamBandMask" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.36",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Bits",
+                    "customNotch1" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "customNotch2" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "amateurBand30m" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "amateurBand40m" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "amateurBand80m" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "amateurBand160m" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "()",
+            "description" :
+                """The transmit power spectral density mask code, used
+to avoid interference with HAM (Handheld Amateur Radio)
+radio bands by introducing power control (notching) in one
+or more of these bands.
+
+Amateur radio band notching is defined in the VDSL
+spectrum as follows:
+
+Band  Start Frequency     Stop Frequency
+----  ------------------  --------------------------------
+30m   1810 kHz            2000 kHz
+40m   3500 kHz            3800 kHz (ETSI); 4000 kHz (ANSI)
+80m   7000 kHz            7100 kHz (ETSI); 7300 kHz (ANSI)
+160m  10100 kHz           10150 kHz
+
+
+
+Notching for each standard band can be enabled or disabled
+via the bit mask.
+
+Two custom notches may be specified.  If either of these
+are enabled via the bit mask, then the following objects
+MUST be specified:
+
+If customNotch1 is enabled, then both
+    vdslLineConfCustomNotch1Start
+    vdslLineConfCustomNotch1Stop
+MUST be specified.
+
+If customNotch2 is enabled, then both
+    vdslLineConfCustomNotch2Start
+    vdslLineConfCustomNotch2Stop
+MUST be specified.""",
+            "reference" :
+                """DSLF TR-057, section 2.6""",
+        }, # column
+        "vdslLineConfCustomNotch1Start" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.37",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "kHz",
+            "description" :
+                """Specifies the start frequency of custom HAM (Handheld
+Amateur Radio) notch 1.  vdslLineConfCustomNotch1Start MUST
+be less than or equal to vdslLineConfCustomNotch1Stop.""",
+        }, # column
+        "vdslLineConfCustomNotch1Stop" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.38",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "kHz",
+            "description" :
+                """Specifies the stop frequency of custom HAM (Handheld
+Amateur Radio) notch 1.  vdslLineConfCustomNotch1Stop MUST
+be greater than or equal to vdslLineConfCustomNotch1Start.""",
+        }, # column
+        "vdslLineConfCustomNotch2Start" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.39",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "kHz",
+            "description" :
+                """Specifies the start frequency of custom HAM (Handheld
+Amateur Radio) notch 2.  vdslLineConfCustomNotch2Start MUST
+be less than or equal to vdslLineConfCustomNotch2Stop.""",
+        }, # column
+        "vdslLineConfCustomNotch2Stop" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.40",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "kHz",
+            "description" :
+                """Specifies the stop frequency of custom HAM (Handheld
+Amateur Radio) notch 2.  vdslLineConfCustomNotch2Stop MUST
+be greater than or equal to vdslLineConfCustomNotch2Start.""",
+        }, # column
+        "vdslLineConfDownTargetSlowBurst" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.41",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "1275"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "1275"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "microseconds",
+            "description" :
+                """Specifies the target level of impulse noise (burst)
+protection for an interleaved (slow) channel.""",
+            "reference" :
+                """ITU-T G.997.1, section 7.3.2.3""",
+        }, # column
+        "vdslLineConfUpTargetSlowBurst" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.42",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "1275"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "1275"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "microseconds",
+            "description" :
+                """Specifies the target level of impulse noise (burst)
+protection for an interleaved (slow) channel.""",
+            "reference" :
+                """ITU-T G.997.1, section 7.3.2.3""",
+        }, # column
+        "vdslLineConfDownMaxFastFec" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.43",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "50"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "50"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "%",
+            "description" :
+                """This parameter provisions the maximum level of Forward
+Error Correction (FEC) redundancy related overhead to
+be maintained for a fast channel.""",
+        }, # column
+        "vdslLineConfUpMaxFastFec" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.44",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "50"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "50"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "%",
+            "description" :
+                """This parameter provisions the maximum level of Forward
+Error Correction (FEC) redundancy related overhead to
+be maintained for a fast channel.""",
+        }, # column
+        "vdslLineConfLineType" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.45",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "noChannel" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "fastOnly" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "interleavedOnly" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "fastOrInterleaved" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "fastAndInterleaved" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "noChannel",
+            "description" :
+                """This parameter provisions the VDSL physical entity at
+start-up by defining whether and how the line will be
+channelized, i.e., which channel type(s) are supported.
+If the line is to be channelized, the value will be other
+than noChannel(1).
+
+This configuration can be activated only during start-up.
+Afterwards, the value of vdslLineType coincides with the
+value of vdslLineConfLineType.  Depending on this value,
+the corresponding entries in the ifTable for the
+interleaved and the fast channels are enabled or disabled
+according to the value of their ifOperStatus.
+
+Defined values are:
+
+
+
+noChannel(1)          -- no channels exist
+fastOnly(2)           -- only fast channel exists
+interleavedOnly(3)    -- only interleaved channel exists
+fastOrInterleaved(4)  -- either fast or interleaved channel
+                      -- exists, but only one at a time
+fastAndInterleaved(5) -- both fast and interleaved channels
+                      -- exist
+
+Note that 'slow' and 'interleaved' refer to the same
+channel.""",
+            "reference" :
+                """T1E1.4/2000-009R3, Part 1, common spec""",
+        }, # column
+        "vdslLineConfProfRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.11.1.46",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object is used to create a new row or modify or
+delete an existing row in this table.
+
+A profile activated by setting this object to 'active'.
+When 'active' is set, the system will validate the profile.
+
+Before a profile can be deleted or taken out of service
+(by setting this object to 'destroy' or 'outOfService'),
+it must be first unreferenced from all associated lines.
+
+An 'active' profile may be modified at any time.  Note
+that some changes may require that any referenced lines be
+restarted (e.g., vdslLineConfLineType).""",
+        }, # column
+        "vdslLineAlarmConfProfileTable" : {
+            "nodetype" : "table",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.20",
+            "status" : "current",
+            "description" :
+                """This table contains information on the VDSL line alarm
+configuration.  One entry in this table reflects a profile
+defined by a manager which can be used to configure the
+VDSL line alarm thresholds.
+
+
+
+
+Entries in this table MUST be maintained in a
+persistent manner.""",
+        }, # table
+        "vdslLineAlarmConfProfileEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.20.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "vdslLineAlarmConfProfileName",
+            ],
+            "description" :
+                """Each entry consists of a list of parameters that
+represents the configuration of a VDSL line alarm
+profile.
+
+A default profile with an index of 'DEFVAL', will
+always exist and its parameters will be set to vendor
+specific values, unless otherwise specified in this
+document.""",
+        }, # row
+        "vdslLineAlarmConfProfileName" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.20.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMP-FRAMEWORK-MIB",
+                        "type" : "SnmpAdminString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """The name for this profile as specified by an
+administrator.""",
+        }, # column
+        "vdslLineAlarmConfThresh15MinLofs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.20.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfIntervalThreshold"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "seconds",
+            "description" :
+                """This object configures the threshold for the number of
+loss of frame seconds (lofs) within any given 15-minute
+performance data collection interval.  If the value of
+loss of frame seconds in a particular 15-minute collection
+interval reaches/exceeds this value, a
+vdslPerfLofsThreshNotification notification will be
+generated.  No more than one notification will be sent
+per interval.""",
+        }, # column
+        "vdslLineAlarmConfThresh15MinLoss" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.20.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfIntervalThreshold"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "seconds",
+            "description" :
+                """This object configures the threshold for the number of
+loss of signal seconds (loss) within any given 15-minute
+performance data collection interval.  If the value of
+loss of signal seconds in a particular 15-minute
+collection interval reaches/exceeds this value, a
+vdslPerfLossThreshNotification notification will be
+generated.  One notification will be sent per interval
+per endpoint.""",
+        }, # column
+        "vdslLineAlarmConfThresh15MinLprs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.20.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfIntervalThreshold"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "seconds",
+            "description" :
+                """This object configures the threshold for the number of
+loss of power seconds (lprs) within any given 15-minute
+performance data collection interval.  If the value of
+loss of power seconds in a particular 15-minute collection
+interval reaches/exceeds this value, a
+vdslPerfLprsThreshNotification notification will be
+generated.  No more than one notification will be sent
+per interval.""",
+        }, # column
+        "vdslLineAlarmConfThresh15MinLols" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.20.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfIntervalThreshold"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "seconds",
+            "description" :
+                """This object configures the threshold for the number of
+loss of link seconds (lols) within any given 15-minute
+performance data collection interval.  If the value of
+loss of power seconds in a particular 15-minute collection
+interval reaches/exceeds this value, a
+vdslPerfLolsThreshNotification notification will be
+generated.  No more than one notification will be sent
+per interval.""",
+        }, # column
+        "vdslLineAlarmConfThresh15MinESs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.20.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfIntervalThreshold"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "seconds",
+            "description" :
+                """This object configures the threshold for the number of
+errored seconds (ESs) within any given 15-minute
+performance data collection interval.  If the value of
+errored seconds in a particular 15-minute collection
+interval reaches/exceeds this value, a
+vdslPerfESsThreshNotification notification will be
+generated.  No more than one notification will be sent
+per interval.""",
+        }, # column
+        "vdslLineAlarmConfThresh15MinSESs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.20.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfIntervalThreshold"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "seconds",
+            "description" :
+                """This object configures the threshold for the number of
+severely errored seconds (SESs) within any given 15-minute
+performance data collection interval.  If the value of
+severely errored seconds in a particular 15-minute
+collection interval reaches/exceeds this value, a
+vdslPerfSESsThreshNotification notification will be
+generated.  No more than one notification will be sent
+per interval.""",
+        }, # column
+        "vdslLineAlarmConfThresh15MinUASs" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.20.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"HC-PerfHist-TC-MIB", "name" : "HCPerfIntervalThreshold"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "seconds",
+            "description" :
+                """This object configures the threshold for the number of
+unavailable seconds (UASs) within any given 15-minute
+performance data collection interval.  If the value of
+unavailable seconds in a particular 15-minute collection
+interval reaches/exceeds this value, a
+vdslPerfUASsThreshNotification notification will be
+generated.  No more than one notification will be sent
+per interval.""",
+        }, # column
+        "vdslLineAlarmConfInitFailure" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.20.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "default" : "false",
+            "description" :
+                """This object specifies if a vdslInitFailureNotification
+notification will be generated if an initialization
+failure occurs.""",
+        }, # column
+        "vdslLineAlarmConfProfRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.1.20.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object is used to create a new row or modify or
+delete an existing row in this table.
+
+A profile activated by setting this object to 'active'.
+When 'active' is set, the system will validate the profile.
+
+Before a profile can be deleted or taken out of service,
+(by setting this object to 'destroy' or 'outOfService') it
+must be first unreferenced from all associated lines.
+
+An 'active' profile may be modified at any time.""",
+        }, # column
+        "vdslConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.3",
+        }, # node
+        "vdslGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.3.1",
+        }, # node
+        "vdslCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.3.2",
+        }, # node
+    }, # nodes
+
+    "notifications" : {
+        "vdslPerfLofsThreshNotification" : {
+            "nodetype" : "notification",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.0.1",
+            "status" : "current",
+            "objects" : {
+                "vdslPerfDataCurr15MinLofs" : {
+                    "nodetype" : "object",
+                    "module" : "VDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """Loss of Framing 15-minute interval threshold
+(vdslLineAlarmConfThresh15MinLofs) reached.""",
+        }, # notification
+        "vdslPerfLossThreshNotification" : {
+            "nodetype" : "notification",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.0.2",
+            "status" : "current",
+            "objects" : {
+                "vdslPerfDataCurr15MinLoss" : {
+                    "nodetype" : "object",
+                    "module" : "VDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """Loss of Signal 15-minute interval threshold
+(vdslLineAlarmConfThresh15MinLoss) reached.""",
+        }, # notification
+        "vdslPerfLprsThreshNotification" : {
+            "nodetype" : "notification",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.0.3",
+            "status" : "current",
+            "objects" : {
+                "vdslPerfDataCurr15MinLprs" : {
+                    "nodetype" : "object",
+                    "module" : "VDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """Loss of Power 15-minute interval threshold
+(vdslLineAlarmConfThresh15MinLprs) reached.""",
+        }, # notification
+        "vdslPerfLolsThreshNotification" : {
+            "nodetype" : "notification",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.0.4",
+            "status" : "current",
+            "objects" : {
+                "vdslPerfDataCurr15MinLols" : {
+                    "nodetype" : "object",
+                    "module" : "VDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """Loss of Link 15-minute interval threshold
+(vdslLineAlarmConfThresh15MinLols) reached.""",
+        }, # notification
+        "vdslPerfESsThreshNotification" : {
+            "nodetype" : "notification",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.0.5",
+            "status" : "current",
+            "objects" : {
+                "vdslPerfDataCurr15MinESs" : {
+                    "nodetype" : "object",
+                    "module" : "VDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """Errored Seconds 15-minute interval threshold
+(vdslLineAlarmConfThresh15MinESs) reached.""",
+        }, # notification
+        "vdslPerfSESsThreshNotification" : {
+            "nodetype" : "notification",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.0.6",
+            "status" : "current",
+            "objects" : {
+                "vdslPerfDataCurr15MinSESs" : {
+                    "nodetype" : "object",
+                    "module" : "VDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """Severely Errored Seconds 15-minute interval threshold
+(vdslLineAlarmConfThresh15MinSESs) reached.""",
+        }, # notification
+        "vdslPerfUASsThreshNotification" : {
+            "nodetype" : "notification",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.0.7",
+            "status" : "current",
+            "objects" : {
+                "vdslPerfDataCurr15MinUASs" : {
+                    "nodetype" : "object",
+                    "module" : "VDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """Unavailable Seconds 15-minute interval threshold
+(vdslLineAlarmConfThresh15MinUASs) reached.""",
+        }, # notification
+        "vdslDownMaxSnrMgnNotification" : {
+            "nodetype" : "notification",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.0.8",
+            "status" : "current",
+            "objects" : {
+                "vdslPhysCurrSnrMgn" : {
+                    "nodetype" : "object",
+                    "module" : "VDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """The downstream Signal to Noise Margin exceeded
+vdslLineConfDownMaxSnrMgn.  The object
+vdslPhysCurrSnrMgn will contain the Signal to Noise
+margin as measured by the VTU-R.""",
+        }, # notification
+        "vdslDownMinSnrMgnNotification" : {
+            "nodetype" : "notification",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.0.9",
+            "status" : "current",
+            "objects" : {
+                "vdslPhysCurrSnrMgn" : {
+                    "nodetype" : "object",
+                    "module" : "VDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """The downstream Signal to Noise Margin fell below
+vdslLineConfDownMinSnrMgn.  The object vdslPhysCurrSnrMgn
+will contain the Signal to Noise margin as measured by
+the VTU-R.""",
+        }, # notification
+        "vdslUpMaxSnrMgnNotification" : {
+            "nodetype" : "notification",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.0.10",
+            "status" : "current",
+            "objects" : {
+                "vdslPhysCurrSnrMgn" : {
+                    "nodetype" : "object",
+                    "module" : "VDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """The upstream Signal to Noise Margin exceeded
+vdslLineConfUpMaxSnrMgn.  The object vdslPhysCurrSnrMgn
+will contain the Signal to Noise margin as measured
+by the VTU-C.""",
+        }, # notification
+        "vdslUpMinSnrMgnNotification" : {
+            "nodetype" : "notification",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.0.11",
+            "status" : "current",
+            "objects" : {
+                "vdslPhysCurrSnrMgn" : {
+                    "nodetype" : "object",
+                    "module" : "VDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """The upstream Signal to Noise Margin fell below
+vdslLineConfUpMinSnrMgn.  The object vdslPhysCurrSnrMgn
+will contain the Signal to Noise margin as measured
+by the VTU-C.""",
+        }, # notification
+        "vdslInitFailureNotification" : {
+            "nodetype" : "notification",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.0.12",
+            "status" : "current",
+            "objects" : {
+                "vdslPhysCurrStatus" : {
+                    "nodetype" : "object",
+                    "module" : "VDSL-LINE-MIB"
+                },
+            },
+            "description" :
+                """Vtu initialization failed.  See vdslPhysCurrStatus for
+potential reasons.""",
+        }, # notification
+    }, # notifications
+
+    "groups" : {
+        "vdslGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.3.1.1",
+            "status" : "current",
+            "members" : {
+                "vdslLineCoding" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineType" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfProfile" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineAlarmConfProfile" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPhysInvSerialNumber" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPhysInvVendorID" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPhysInvVersionNumber" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPhysCurrSnrMgn" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPhysCurrAtn" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPhysCurrStatus" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPhysCurrOutputPwr" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPhysCurrAttainableRate" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPhysCurrLineRate" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslChanInterleaveDelay" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslChanCrcBlockLength" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslChanCurrTxRate" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslChanCurrTxSlowBurstProtect" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslChanCurrTxFastFec" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataValidIntervals" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataInvalidIntervals" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataLofs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataLoss" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataLprs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataLols" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataESs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataSESs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataUASs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataInits" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataCurr15MinTimeElapsed" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataCurr15MinLofs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataCurr15MinLoss" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataCurr15MinLprs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataCurr15MinLols" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataCurr15MinESs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataCurr15MinSESs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataCurr15MinUASs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataCurr15MinInits" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfData1DayValidIntervals" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfData1DayInvalidIntervals" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataCurr1DayTimeElapsed" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataCurr1DayLofs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataCurr1DayLoss" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataCurr1DayLprs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataCurr1DayLols" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataCurr1DayESs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataCurr1DaySESs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataCurr1DayUASs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfDataCurr1DayInits" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfIntervalLofs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfIntervalLoss" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfIntervalLprs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfIntervalLols" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfIntervalESs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfIntervalSESs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfIntervalUASs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfIntervalInits" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerf1DayIntervalMoniSecs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerf1DayIntervalLofs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerf1DayIntervalLoss" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerf1DayIntervalLprs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerf1DayIntervalLols" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerf1DayIntervalESs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerf1DayIntervalSESs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerf1DayIntervalUASs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerf1DayIntervalInits" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslChanValidIntervals" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslChanInvalidIntervals" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslChanFixedOctets" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslChanBadBlks" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslChanCurr15MinTimeElapsed" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslChanCurr15MinFixedOctets" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslChanCurr15MinBadBlks" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslChan1DayValidIntervals" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslChan1DayInvalidIntervals" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslChanCurr1DayTimeElapsed" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslChanCurr1DayFixedOctets" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslChanCurr1DayBadBlks" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslChanIntervalFixedOctets" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslChanIntervalBadBlks" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslChan1DayIntervalMoniSecs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslChan1DayIntervalFixedOctets" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslChan1DayIntervalBadBlks" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfDownRateMode" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfUpRateMode" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfDownMaxPwr" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfUpMaxPwr" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfDownMaxSnrMgn" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfDownMinSnrMgn" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfDownTargetSnrMgn" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfUpMaxSnrMgn" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfUpMinSnrMgn" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfUpTargetSnrMgn" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfDownFastMaxDataRate" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfDownFastMinDataRate" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfDownSlowMaxDataRate" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfDownSlowMinDataRate" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfUpFastMaxDataRate" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfUpFastMinDataRate" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfUpSlowMaxDataRate" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfUpSlowMinDataRate" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfDownRateRatio" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfUpRateRatio" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfDownMaxInterDelay" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfUpMaxInterDelay" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfDownPboControl" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfUpPboControl" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfDownPboLevel" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfUpPboLevel" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfDeploymentScenario" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfAdslPresence" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfApplicableStandard" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfBandPlan" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfBandPlanFx" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfBandOptUsage" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfUpPsdTemplate" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfDownPsdTemplate" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfHamBandMask" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfCustomNotch1Start" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfCustomNotch1Stop" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfCustomNotch2Start" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfCustomNotch2Stop" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfDownTargetSlowBurst" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfUpTargetSlowBurst" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfDownMaxFastFec" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfUpMaxFastFec" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfLineType" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineConfProfRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineAlarmConfThresh15MinLofs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineAlarmConfThresh15MinLoss" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineAlarmConfThresh15MinLprs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineAlarmConfThresh15MinLols" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineAlarmConfThresh15MinESs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineAlarmConfThresh15MinSESs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineAlarmConfThresh15MinUASs" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineAlarmConfInitFailure" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslLineAlarmConfProfRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing information about
+a VDSL Line.""",
+        }, # group
+        "vdslNotificationGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.3.1.2",
+            "status" : "current",
+            "members" : {
+                "vdslPerfLofsThreshNotification" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfLossThreshNotification" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfLprsThreshNotification" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfLolsThreshNotification" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfESsThreshNotification" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfSESsThreshNotification" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslPerfUASsThreshNotification" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslDownMaxSnrMgnNotification" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslDownMinSnrMgnNotification" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslUpMaxSnrMgnNotification" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslUpMinSnrMgnNotification" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslInitFailureNotification" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-MIB"
+                },
+            }, # members
+            "description" :
+                """This group supports notifications of significant
+conditions associated with VDSL Lines.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "vdslLineMibCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "VDSL-LINE-MIB",
+            "oid" : "1.3.6.1.2.1.10.97.1.3.2.1",
+            "status" : "current",
+            "description" :
+                """The compliance statement for SNMP entities which
+manage VDSL interfaces.""",
+            "requires" : {
+                "vdslGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "VDSL-LINE-MIB"
+                },
+                "vdslNotificationGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "VDSL-LINE-MIB"
+                },
+            }, # requires
+        }, # compliance
+    }, # compliances
+
+}