logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/VDSL-LINE-EXT-SCM-MIB.dic

@@ -0,0 +1,605 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python VDSL-LINE-EXT-SCM-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/VDSL-LINE-EXT-SCM-MIB"
+
+MIB = {
+    "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+
+    "VDSL-LINE-EXT-SCM-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """ADSLMIB Working Group""",
+        "contact" : 
+            """WG-email:  adslmib@ietf.org
+Info:      https://www1.ietf.org/mailman/listinfo/adslmib
+
+Chair:     Mike Sneed
+           Sand Channel Systems
+Postal:    P.O. Box 37324
+           Raleigh NC 27627-732
+Email:     sneedmike@hotmail.com
+Phone:     +1 206 600 7022
+
+Co-Chair/Co-editor:
+           Bob Ray
+           PESA Switching Systems, Inc.
+Postal:    330-A Wynn Drive
+           Huntsville, AL 35805
+           USA
+Email:     rray@pesa.com
+Phone:     +1 256 726 9200 ext.  142
+
+
+
+Co-editor: Menachem Dodge
+           ECI Telecom Ltd.
+Postal:    30 Hasivim St.
+           Petach Tikva 49517,
+           Israel
+Email:     mbdodge@ieee.org
+Phone:     +972 3 926 8421""",
+        "description" :
+            """The VDSL-LINE-MIB found in RFC 3728 defines objects for the
+management of a pair of VDSL transceivers at each end of the VDSL
+line.  The VDSL-LINE-MIB configures and monitors the line code
+independent parameters (TC layer) of the VDSL line.  This MIB
+module is an optional extension of the VDSL-LINE-MIB and defines
+objects for configuration and monitoring of the line code specific
+(LCS) elements (PMD layer) for VDSL lines using SCM coding.  The
+objects in this extension MIB MUST NOT be used for VDSL lines
+using Multiple Carrier Modulation (MCM) line coding.  If an object
+in this extension MIB is referenced by a line which does not use
+SCM, it has no effect on the operation of that line.
+
+Naming Conventions:
+
+   Vtuc -- VDSL transceiver at near (Central) end of line
+   Vtur -- VDSL transceiver at Remote end of line
+   Vtu  -- One of either Vtuc or Vtur
+   Curr -- Current
+   Atn  -- Attenuation
+   LCS  -- Line Code Specific
+   Max  -- Maximum
+   Mgn  -- Margin
+   PSD  -- Power Spectral Density
+   Rx   -- Receive
+   Snr  -- Signal to Noise Ratio
+   Tx   -- Transmit
+
+Copyright (C) The Internet Society (2005).  This version
+of this MIB module is part of RFC 4069: see the RFC
+itself for full legal notices.""",
+        "revisions" : (
+            {
+                "date" : "2005-04-28 00:00",
+                "description" :
+                    """Initial version, published as RFC 4069.""",
+            },
+        ),
+        "identity node" : "vdslExtSCMMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "SNMPv2-SMI", "name" : "transmission"},
+        {"module" : "SNMPv2-SMI", "name" : "Unsigned32"},
+        {"module" : "SNMPv2-TC", "name" : "TEXTUAL-CONVENTION"},
+        {"module" : "SNMPv2-TC", "name" : "TruthValue"},
+        {"module" : "SNMPv2-TC", "name" : "RowStatus"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "IF-MIB", "name" : "ifIndex"},
+        {"module" : "VDSL-LINE-MIB", "name" : "vdslLineConfProfileName"},
+    ),
+
+    "typedefs" : {
+        "VdslSCMBandId" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "optionalBand" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "firstDownstreamBand" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "firstUpstreamBand" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "secondDownstreamBand" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "secondUpstreamBand" : {
+                "nodetype" : "namednumber",
+                "number" : "5"
+            },
+            "thirdDownstreamBand" : {
+                "nodetype" : "namednumber",
+                "number" : "6"
+            },
+            "thirdUpstreamBand" : {
+                "nodetype" : "namednumber",
+                "number" : "7"
+            },
+            "description" :
+                """This data type is used as the syntax for the VDSL SCM Band
+Identity.  Attributes with this syntax identify the SCM Band
+referred to.  Specified as an INTEGER, the possible values
+are:
+
+optionalBand (1)  -- the optional Band range [25kHz - 138kHz]
+firstDownstreamBand (2)  -- first Downstream Band
+firstUpstreamBand (3)    -- first Upstream Band
+secondDownstreamBand (4) -- second Downstream Band
+secondUpstreamBand (5)   -- second Upstream Band
+thirdDownstreamBand (6)  -- third Downstream Band
+thirdUpstreamBand (7)    -- third Upstream Band""",
+        },
+    }, # typedefs
+
+    "nodes" : {
+        "vdslExtSCMMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228",
+            "status" : "current",
+        }, # node
+        "vdslLineExtSCMMib" : {
+            "nodetype" : "node",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1",
+        }, # node
+        "vdslLineExtSCMMibObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.1",
+        }, # node
+        "vdslLineSCMConfProfileBandTable" : {
+            "nodetype" : "table",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.1.1",
+            "status" : "current",
+            "description" :
+                """This table contains transmit band descriptor configuration
+information for a VDSL line.  Each entry in this table
+reflects the configuration for one of possibly many bands
+of a single carrier modulation (SCM) VDSL line.  For each
+profile which is associated with a VDSL line using SCM
+line coding, five entries in this table will exist, one for
+each of the five bands.  Bands which are not in use will be
+marked as unused.  These entries are defined by a manager
+and can be used to configure the VDSL line.  If an entry in
+
+
+
+
+
+this table is referenced by a line which does not use SCM,
+it has no effect on the operation of that line.""",
+        }, # table
+        "vdslLineSCMConfProfileBandEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.1.1.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "vdslLineConfProfileName",
+                "vdslLineSCMConfProfileBandId",
+            ],
+            "description" :
+                """Each entry consists of a list of parameters that
+represents the configuration of a single carrier
+modulation VDSL modem transmit band.
+
+A default profile with an index of 'DEFVAL', will
+always exist and its parameters will be set to vendor
+specific values, unless otherwise specified in this
+document.
+
+All read-create objects defined in this MIB module SHOULD be
+stored persistently.""",
+        }, # row
+        "vdslLineSCMConfProfileBandId" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.1.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"VDSL-LINE-EXT-SCM-MIB", "name" : "VdslSCMBandId"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The BandId for this entry, which specifies which band
+is being referred to.""",
+        }, # column
+        "vdslLineSCMConfProfileBandInUse" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.1.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Indicates whether this band is in use.
+If set to True this band is in use.""",
+        }, # column
+        "vdslLineSCMConfProfileBandCenterFrequency" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.1.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "units" : "Hz",
+            "description" :
+                """Specifies the center frequency in Hz""",
+            "reference" :
+                """T1E1.4/2000-011R3""",
+        }, # column
+        "vdslLineSCMConfProfileBandSymbolRate" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.1.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "units" : "baud",
+            "description" :
+                """The requested symbol rate in baud.""",
+            "reference" :
+                """T1E1.4/2000-011R3""",
+        }, # column
+        "vdslLineSCMConfProfileBandConstellationSize" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.1.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "16"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "16"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "units" : "log2",
+            "description" :
+                """Specifies the constellation size.""",
+            "reference" :
+                """T1E1.4/2000-011R3""",
+        }, # column
+        "vdslLineSCMConfProfileBandTransmitPSDLevel" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.1.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "units" : "-0.25 dBm/Hz",
+            "description" :
+                """The requested transmit power spectral density for the VDSL
+modem.  The Actual value in -0.25 dBm/Hz.""",
+            "reference" :
+                """T1E1.4/2000-011R3""",
+        }, # column
+        "vdslLineSCMConfProfileBandRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.1.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object is used to create a new row or modify or
+delete an existing row in this table.
+
+A profile activated by setting this object to `active'.
+When `active' is set, the system will validate the profile.
+
+None of the columns in this row may be modified while the
+row is in the `active' state.
+
+Before a profile can be deleted or taken out of
+service, (by setting this object to `destroy' or
+`notInService') it must be first unreferenced
+from all associated lines.""",
+        }, # column
+        "vdslLineSCMPhysBandTable" : {
+            "nodetype" : "table",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.1.2",
+            "status" : "current",
+            "description" :
+                """This table provides one row for each SCM Vtu band.  This
+table is read only as it reflects the current physical
+parameters of each band.  For each ifIndex which is
+associated with a VDSL line using SCM line coding, five
+entries in this table will exist, one for each of the
+five bands.  Bands which are not in use will be marked
+as unused.""",
+        }, # table
+        "vdslLineSCMPhysBandEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.1.2.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "vdslLineSCMPhysBandId",
+            ],
+            "description" :
+                """An entry in the vdslLineSCMPhysBandTable.""",
+        }, # row
+        "vdslLineSCMPhysBandId" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.1.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"VDSL-LINE-EXT-SCM-MIB", "name" : "VdslSCMBandId"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The BandId for this entry, which specifies which band
+is being referred to.""",
+        }, # column
+        "vdslLineSCMPhysBandInUse" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.1.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Indicates whether this band is in use.
+If set to True this band is in use.""",
+        }, # column
+        "vdslLineSCMPhysBandCurrCenterFrequency" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.1.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "Hz",
+            "description" :
+                """The current center frequency in Hz for this band.""",
+            "reference" :
+                """T1E1.4/2000-011R3""",
+        }, # column
+        "vdslLineSCMPhysBandCurrSymbolRate" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.1.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "baud",
+            "description" :
+                """The current value of the symbol rate in baud for this
+band.""",
+            "reference" :
+                """T1E1.4/2000-011R3""",
+        }, # column
+        "vdslLineSCMPhysBandCurrConstellationSize" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.1.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "16"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "16"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "log2",
+            "description" :
+                """The current constellation size on this band.""",
+            "reference" :
+                """T1E1.4/2000-011R3""",
+        }, # column
+        "vdslLineSCMPhysBandCurrPSDLevel" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.1.2.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "units" : "- 0.25 dBm/Hz",
+            "description" :
+                """The transmit power spectral density for the
+VDSL modem.""",
+            "reference" :
+                """T1E1.4/2000-011R3""",
+        }, # column
+        "vdslLineSCMPhysBandCurrSnrMgn" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.1.2.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "units" : "0.25 dB",
+            "description" :
+                """Noise margin as seen by this Vtu and band with respect
+to its received signal in 0.25 dB.""",
+        }, # column
+        "vdslLineSCMPhysBandCurrAtn" : {
+            "nodetype" : "column",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.1.2.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "0.25 dB",
+            "description" :
+                """Measured difference in the total power transmitted by
+the peer Vtu on this band and the total power received
+by this Vtu on this band in 0.25 dB.""",
+        }, # column
+        "vdslLineExtSCMConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.2",
+        }, # node
+        "vdslLineExtSCMGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.2.1",
+        }, # node
+        "vdslLineExtSCMCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.2.2",
+        }, # node
+    }, # nodes
+
+    "groups" : {
+        "vdslLineExtSCMGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.2.1.1",
+            "status" : "current",
+            "members" : {
+                "vdslLineSCMConfProfileBandInUse" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-EXT-SCM-MIB"
+                },
+                "vdslLineSCMConfProfileBandTransmitPSDLevel" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-EXT-SCM-MIB"
+                },
+                "vdslLineSCMConfProfileBandSymbolRate" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-EXT-SCM-MIB"
+                },
+                "vdslLineSCMConfProfileBandConstellationSize" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-EXT-SCM-MIB"
+                },
+                "vdslLineSCMConfProfileBandCenterFrequency" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-EXT-SCM-MIB"
+                },
+                "vdslLineSCMConfProfileBandRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-EXT-SCM-MIB"
+                },
+                "vdslLineSCMPhysBandInUse" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-EXT-SCM-MIB"
+                },
+                "vdslLineSCMPhysBandCurrPSDLevel" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-EXT-SCM-MIB"
+                },
+                "vdslLineSCMPhysBandCurrSymbolRate" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-EXT-SCM-MIB"
+                },
+                "vdslLineSCMPhysBandCurrConstellationSize" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-EXT-SCM-MIB"
+                },
+                "vdslLineSCMPhysBandCurrCenterFrequency" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-EXT-SCM-MIB"
+                },
+                "vdslLineSCMPhysBandCurrSnrMgn" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-EXT-SCM-MIB"
+                },
+                "vdslLineSCMPhysBandCurrAtn" : {
+                    "nodetype" : "member",
+                    "module" : "VDSL-LINE-EXT-SCM-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing configuration
+information for a VDSL line based upon single carrier
+modulation modem.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "vdslLineExtSCMMibCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "VDSL-LINE-EXT-SCM-MIB",
+            "oid" : "1.3.6.1.2.1.10.228.1.2.2.1",
+            "status" : "current",
+            "description" :
+                """The compliance statement for SNMP entities which
+manage VDSL interfaces.""",
+            "requires" : {
+                "vdslLineExtSCMGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "VDSL-LINE-EXT-SCM-MIB"
+                },
+            }, # requires
+        }, # compliance
+    }, # compliances
+
+}