logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/UPS-MIB.dic

@@ -0,0 +1,3088 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python UPS-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/UPS-MIB"
+
+MIB = {
+    "moduleName" : "UPS-MIB",
+
+    "UPS-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF UPS MIB Working Group""",
+        "contact" : 
+            """        Jeffrey D. Case
+
+Postal: SNMP Research, Incorporated
+        3001 Kimberlin Heights Road
+        Knoxville, TN  37920
+        US
+
+   Tel: +1 615 573 1434
+   Fax: +1 615 573 9197
+
+E-mail: case@snmp.com""",
+        "description" :
+            """The MIB module to describe Uninterruptible Power
+Supplies.""",
+        "revisions" : (
+            {
+                "date" : "1994-02-23 00:00",
+                "description" :
+                    """[Revision added by libsmi due to a LAST-UPDATED clause.]""",
+            },
+        ),
+        "identity node" : "upsMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "NOTIFICATION-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter32"},
+        {"module" : "SNMPv2-SMI", "name" : "Gauge32"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "SNMPv2-SMI", "name" : "mib-2"},
+        {"module" : "SNMPv2-TC", "name" : "DisplayString"},
+        {"module" : "SNMPv2-TC", "name" : "TimeStamp"},
+        {"module" : "SNMPv2-TC", "name" : "TimeInterval"},
+        {"module" : "SNMPv2-TC", "name" : "TestAndIncr"},
+        {"module" : "SNMPv2-TC", "name" : "AutonomousType"},
+        {"module" : "SNMPv2-TC", "name" : "TEXTUAL-CONVENTION"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+    ),
+
+    "typedefs" : {
+        "PositiveInteger" : {
+            "basetype" : "Integer32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "1",
+                "max" : "2147483647"
+            },
+            ],
+            "range" : {
+                "min" : "1",
+                "max" : "2147483647"
+            },
+            "format" : "d",
+            "description" :
+                """This data type is a non-zero and non-negative value.""",
+        },
+        "NonNegativeInteger" : {
+            "basetype" : "Integer32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "2147483647"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "2147483647"
+            },
+            "format" : "d",
+            "description" :
+                """This data type is a non-negative value.""",
+        },
+    }, # typedefs
+
+    "nodes" : {
+        "upsMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33",
+            "status" : "current",
+        }, # node
+        "upsObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1",
+        }, # node
+        "upsIdent" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.1",
+        }, # node
+        "upsIdentManufacturer" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMPv2-TC",
+                        "type" : "DisplayString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "31"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "31"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The name of the UPS manufacturer.""",
+        }, # scalar
+        "upsIdentModel" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMPv2-TC",
+                        "type" : "DisplayString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "63"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "63"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The UPS Model designation.""",
+        }, # scalar
+        "upsIdentUPSSoftwareVersion" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMPv2-TC",
+                        "type" : "DisplayString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "63"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "63"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The UPS firmware/software version(s).  This variable
+may or may not have the same value as
+upsIdentAgentSoftwareVersion in some implementations.""",
+        }, # scalar
+        "upsIdentAgentSoftwareVersion" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMPv2-TC",
+                        "type" : "DisplayString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "63"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "63"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The UPS agent software version.  This variable may or
+may not have the same value as
+upsIdentUPSSoftwareVersion in some implementations.""",
+        }, # scalar
+        "upsIdentName" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMPv2-TC",
+                        "type" : "DisplayString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "63"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "63"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """A string identifying the UPS.  This object should be
+set by the administrator.""",
+        }, # scalar
+        "upsIdentAttachedDevices" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMPv2-TC",
+                        "type" : "DisplayString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "63"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "63"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """A string identifying the devices attached to the
+output(s) of the UPS.  This object should be set by
+the administrator.""",
+        }, # scalar
+        "upsBattery" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.2",
+        }, # node
+        "upsBatteryStatus" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.2.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "unknown" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "batteryNormal" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "batteryLow" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "batteryDepleted" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The indication of the capacity remaining in the UPS
+system's batteries.   A value of batteryNormal
+indicates that the remaining run-time is greater than
+upsConfigLowBattTime.  A value of batteryLow indicates
+that the remaining battery run-time is less than or
+equal to upsConfigLowBattTime.  A value of
+batteryDepleted indicates that the UPS will be unable
+to sustain the present load when and if the utility
+power is lost (including the possibility that the
+utility power is currently absent and the UPS is
+unable to sustain the output).""",
+        }, # scalar
+        "upsSecondsOnBattery" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.2.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """If the unit is on battery power, the elapsed time
+since the UPS last switched to battery power, or the
+time since the network management subsystem was last
+restarted, whichever is less.  Zero shall be returned
+if the unit is not on battery power.""",
+        }, # scalar
+        "upsEstimatedMinutesRemaining" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.2.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readonly",
+            "units" : "minutes",
+            "description" :
+                """An estimate of the time to battery charge depletion
+under the present load conditions if the utility power
+is off and remains off, or if it were to be lost and
+remain off.""",
+        }, # scalar
+        "upsEstimatedChargeRemaining" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.2.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "100"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "100"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "percent",
+            "description" :
+                """An estimate of the battery charge remaining expressed
+as a percent of full charge.""",
+        }, # scalar
+        "upsBatteryVoltage" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.2.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readonly",
+            "units" : "0.1 Volt DC",
+            "description" :
+                """The magnitude of the present battery voltage.""",
+        }, # scalar
+        "upsBatteryCurrent" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.2.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "units" : "0.1 Amp DC",
+            "description" :
+                """The present battery current.""",
+        }, # scalar
+        "upsBatteryTemperature" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.2.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "units" : "degrees Centigrade",
+            "description" :
+                """The ambient temperature at or near the UPS Battery
+casing.""",
+        }, # scalar
+        "upsInput" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.3",
+        }, # node
+        "upsInputLineBads" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.3.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of the number of times the input entered an
+out-of-tolerance condition as defined by the
+manufacturer.  This count is incremented by one each
+time the input transitions from zero out-of-tolerance
+lines to one or more input lines out-of-tolerance.""",
+        }, # scalar
+        "upsInputNumLines" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.3.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of input lines utilized in this device.
+This variable indicates the number of rows in the
+input table.""",
+        }, # scalar
+        "upsInputTable" : {
+            "nodetype" : "table",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.3.3",
+            "status" : "current",
+            "description" :
+                """A list of input table entries.  The number of entries
+is given by the value of upsInputNumLines.""",
+        }, # table
+        "upsInputEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.3.3.1",
+            "status" : "current",
+            "linkage" : [
+                "upsInputLineIndex",
+            ],
+            "description" :
+                """An entry containing information applicable to a
+particular input line.""",
+        }, # row
+        "upsInputLineIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.3.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The input line identifier.""",
+        }, # column
+        "upsInputFrequency" : {
+            "nodetype" : "column",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.3.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readonly",
+            "units" : "0.1 Hertz",
+            "description" :
+                """The present input frequency.""",
+        }, # column
+        "upsInputVoltage" : {
+            "nodetype" : "column",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.3.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readonly",
+            "units" : "RMS Volts",
+            "description" :
+                """The magnitude of the present input voltage.""",
+        }, # column
+        "upsInputCurrent" : {
+            "nodetype" : "column",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.3.3.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readonly",
+            "units" : "0.1 RMS Amp",
+            "description" :
+                """The magnitude of the present input current.""",
+        }, # column
+        "upsInputTruePower" : {
+            "nodetype" : "column",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.3.3.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readonly",
+            "units" : "Watts",
+            "description" :
+                """The magnitude of the present input true power.""",
+        }, # column
+        "upsOutput" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.4",
+        }, # node
+        "upsOutputSource" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.4.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "other" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "none" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "normal" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "bypass" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "battery" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "booster" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "reducer" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The present source of output power.  The enumeration
+none(2) indicates that there is no source of output
+power (and therefore no output power), for example,
+the system has opened the output breaker.""",
+        }, # scalar
+        "upsOutputFrequency" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.4.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readonly",
+            "units" : "0.1 Hertz",
+            "description" :
+                """The present output frequency.""",
+        }, # scalar
+        "upsOutputNumLines" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.4.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of output lines utilized in this device.
+This variable indicates the number of rows in the
+output table.""",
+        }, # scalar
+        "upsOutputTable" : {
+            "nodetype" : "table",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.4.4",
+            "status" : "current",
+            "description" :
+                """A list of output table entries.  The number of
+entries is given by the value of upsOutputNumLines.""",
+        }, # table
+        "upsOutputEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.4.4.1",
+            "status" : "current",
+            "linkage" : [
+                "upsOutputLineIndex",
+            ],
+            "description" :
+                """An entry containing information applicable to a
+particular output line.""",
+        }, # row
+        "upsOutputLineIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.4.4.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The output line identifier.""",
+        }, # column
+        "upsOutputVoltage" : {
+            "nodetype" : "column",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.4.4.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readonly",
+            "units" : "RMS Volts",
+            "description" :
+                """The present output voltage.""",
+        }, # column
+        "upsOutputCurrent" : {
+            "nodetype" : "column",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.4.4.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readonly",
+            "units" : "0.1 RMS Amp",
+            "description" :
+                """The present output current.""",
+        }, # column
+        "upsOutputPower" : {
+            "nodetype" : "column",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.4.4.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readonly",
+            "units" : "Watts",
+            "description" :
+                """The present output true power.""",
+        }, # column
+        "upsOutputPercentLoad" : {
+            "nodetype" : "column",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.4.4.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "200"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "200"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "percent",
+            "description" :
+                """The percentage of the UPS power capacity presently
+being used on this output line, i.e., the greater of
+the percent load of true power capacity and the
+percent load of VA.""",
+        }, # column
+        "upsBypass" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.5",
+        }, # node
+        "upsBypassFrequency" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.5.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readonly",
+            "units" : "0.1 Hertz",
+            "description" :
+                """The present bypass frequency.""",
+        }, # scalar
+        "upsBypassNumLines" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.5.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of bypass lines utilized in this device.
+This entry indicates the number of rows in the bypass
+table.""",
+        }, # scalar
+        "upsBypassTable" : {
+            "nodetype" : "table",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.5.3",
+            "status" : "current",
+            "description" :
+                """A list of bypass table entries.  The number of
+entries is given by the value of upsBypassNumLines.""",
+        }, # table
+        "upsBypassEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.5.3.1",
+            "status" : "current",
+            "linkage" : [
+                "upsBypassLineIndex",
+            ],
+            "description" :
+                """An entry containing information applicable to a
+particular bypass input.""",
+        }, # row
+        "upsBypassLineIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.5.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The bypass line identifier.""",
+        }, # column
+        "upsBypassVoltage" : {
+            "nodetype" : "column",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.5.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readonly",
+            "units" : "RMS Volts",
+            "description" :
+                """The present bypass voltage.""",
+        }, # column
+        "upsBypassCurrent" : {
+            "nodetype" : "column",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.5.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readonly",
+            "units" : "0.1 RMS Amp",
+            "description" :
+                """The present bypass current.""",
+        }, # column
+        "upsBypassPower" : {
+            "nodetype" : "column",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.5.3.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readonly",
+            "units" : "Watts",
+            "description" :
+                """The present true power conveyed by the bypass.""",
+        }, # column
+        "upsAlarm" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6",
+        }, # node
+        "upsAlarmsPresent" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Gauge32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The present number of active alarm conditions.""",
+        }, # scalar
+        "upsAlarmTable" : {
+            "nodetype" : "table",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.2",
+            "status" : "current",
+            "description" :
+                """A list of alarm table entries.  The table contains
+zero, one, or many rows at any moment, depending upon
+the number of alarm conditions in effect.  The table
+is initially empty at agent startup.  The agent
+creates a row in the table each time a condition is
+detected and deletes that row when that condition no
+longer pertains.  The agent creates the first row with
+upsAlarmId equal to 1, and increments the value of
+upsAlarmId each time a new row is created, wrapping to
+the first free value greater than or equal to 1 when
+the maximum value of upsAlarmId would otherwise be
+exceeded.  Consequently, after multiple operations,
+the table may become sparse, e.g., containing entries
+for rows 95, 100, 101, and 203 and the entries should
+not be assumed to be in chronological order because
+upsAlarmId might have wrapped.
+
+Alarms are named by an AutonomousType (OBJECT
+IDENTIFIER), upsAlarmDescr, to allow a single table to
+reflect well known alarms plus alarms defined by a
+particular implementation, i.e., as documented in the
+private enterprise MIB definition for the device.  No
+two rows will have the same value of upsAlarmDescr,
+since alarms define conditions.  In order to meet this
+requirement, care should be taken in the definition of
+alarm conditions to insure that a system cannot enter
+the same condition multiple times simultaneously.
+
+The number of rows in the table at any given time is
+reflected by the value of upsAlarmsPresent.""",
+        }, # table
+        "upsAlarmEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.2.1",
+            "status" : "current",
+            "linkage" : [
+                "upsAlarmId",
+            ],
+            "description" :
+                """An entry containing information applicable to a
+particular alarm.""",
+        }, # row
+        "upsAlarmId" : {
+            "nodetype" : "column",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """A unique identifier for an alarm condition.  This
+value must remain constant.""",
+        }, # column
+        "upsAlarmDescr" : {
+            "nodetype" : "column",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "AutonomousType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A reference to an alarm description object.  The
+object referenced should not be accessible, but rather
+be used to provide a unique description of the alarm
+condition.""",
+        }, # column
+        "upsAlarmTime" : {
+            "nodetype" : "column",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime when the alarm condition was
+detected.  If the alarm condition was detected at the
+time of agent startup and presumably existed before
+agent startup, the value of upsAlarmTime shall equal
+0.""",
+        }, # column
+        "upsWellKnownAlarms" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3",
+        }, # node
+        "upsAlarmBatteryBad" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.1",
+            "status" : "current",
+            "description" :
+                """One or more batteries have been determined to require
+replacement.""",
+        }, # node
+        "upsAlarmOnBattery" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.2",
+            "status" : "current",
+            "description" :
+                """The UPS is drawing power from the batteries.""",
+        }, # node
+        "upsAlarmLowBattery" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.3",
+            "status" : "current",
+            "description" :
+                """The remaining battery run-time is less than or equal
+to upsConfigLowBattTime.""",
+        }, # node
+        "upsAlarmDepletedBattery" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.4",
+            "status" : "current",
+            "description" :
+                """The UPS will be unable to sustain the present load
+when and if the utility power is lost.""",
+        }, # node
+        "upsAlarmTempBad" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.5",
+            "status" : "current",
+            "description" :
+                """A temperature is out of tolerance.""",
+        }, # node
+        "upsAlarmInputBad" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.6",
+            "status" : "current",
+            "description" :
+                """An input condition is out of tolerance.""",
+        }, # node
+        "upsAlarmOutputBad" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.7",
+            "status" : "current",
+            "description" :
+                """An output condition (other than OutputOverload) is
+out of tolerance.""",
+        }, # node
+        "upsAlarmOutputOverload" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.8",
+            "status" : "current",
+            "description" :
+                """The output load exceeds the UPS output capacity.""",
+        }, # node
+        "upsAlarmOnBypass" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.9",
+            "status" : "current",
+            "description" :
+                """The Bypass is presently engaged on the UPS.""",
+        }, # node
+        "upsAlarmBypassBad" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.10",
+            "status" : "current",
+            "description" :
+                """The Bypass is out of tolerance.""",
+        }, # node
+        "upsAlarmOutputOffAsRequested" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.11",
+            "status" : "current",
+            "description" :
+                """The UPS has shutdown as requested, i.e., the output
+is off.""",
+        }, # node
+        "upsAlarmUpsOffAsRequested" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.12",
+            "status" : "current",
+            "description" :
+                """The entire UPS has shutdown as commanded.""",
+        }, # node
+        "upsAlarmChargerFailed" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.13",
+            "status" : "current",
+            "description" :
+                """An uncorrected problem has been detected within the
+UPS charger subsystem.""",
+        }, # node
+        "upsAlarmUpsOutputOff" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.14",
+            "status" : "current",
+            "description" :
+                """The output of the UPS is in the off state.""",
+        }, # node
+        "upsAlarmUpsSystemOff" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.15",
+            "status" : "current",
+            "description" :
+                """The UPS system is in the off state.""",
+        }, # node
+        "upsAlarmFanFailure" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.16",
+            "status" : "current",
+            "description" :
+                """The failure of one or more fans in the UPS has been
+detected.""",
+        }, # node
+        "upsAlarmFuseFailure" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.17",
+            "status" : "current",
+            "description" :
+                """The failure of one or more fuses has been detected.""",
+        }, # node
+        "upsAlarmGeneralFault" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.18",
+            "status" : "current",
+            "description" :
+                """A general fault in the UPS has been detected.""",
+        }, # node
+        "upsAlarmDiagnosticTestFailed" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.19",
+            "status" : "current",
+            "description" :
+                """The result of the last diagnostic test indicates a
+failure.""",
+        }, # node
+        "upsAlarmCommunicationsLost" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.20",
+            "status" : "current",
+            "description" :
+                """A problem has been encountered in the communications
+between the agent and the UPS.""",
+        }, # node
+        "upsAlarmAwaitingPower" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.21",
+            "status" : "current",
+            "description" :
+                """The UPS output is off and the UPS is awaiting the
+return of input power.""",
+        }, # node
+        "upsAlarmShutdownPending" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.22",
+            "status" : "current",
+            "description" :
+                """A upsShutdownAfterDelay countdown is underway.""",
+        }, # node
+        "upsAlarmShutdownImminent" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.23",
+            "status" : "current",
+            "description" :
+                """The UPS will turn off power to the load in less than
+5 seconds; this may be either a timed shutdown or a
+low battery shutdown.""",
+        }, # node
+        "upsAlarmTestInProgress" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.6.3.24",
+            "status" : "current",
+            "description" :
+                """A test is in progress, as initiated and indicated by
+the Test Group.  Tests initiated via other
+implementation-specific mechanisms can indicate the
+presence of the testing in the alarm table, if
+desired, via a OBJECT-IDENTITY macro in the MIB
+document specific to that implementation and are
+outside the scope of this OBJECT-IDENTITY.""",
+        }, # node
+        "upsTest" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.7",
+        }, # node
+        "upsTestId" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.7.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "ObjectIdentifier"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The test is named by an OBJECT IDENTIFIER which
+allows a standard mechanism for the initiation of
+tests, including the well known tests identified in
+this document as well as those introduced by a
+particular implementation, i.e., as documented in the
+private enterprise MIB definition for the device.
+
+Setting this variable initiates the named test. Sets
+to this variable require the presence of
+upsTestSpinLock in the same SNMP message.
+
+The set request will be rejected with an appropriate
+error message if the requested test cannot be
+performed, including attempts to start a test when
+another test is already in progress.  The status of
+the current or last test is maintained in
+upsTestResultsSummary. Tests in progress may be
+aborted by setting the upsTestId variable to
+upsTestAbortTestInProgress.
+
+Read operations return the value of the name of the
+test in progress if a test is in progress or the name
+of the last test performed if no test is in progress,
+unless no test has been run, in which case the well
+known value upsTestNoTestsInitiated is returned.""",
+        }, # scalar
+        "upsTestSpinLock" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.7.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TestAndIncr"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """A spin lock on the test subsystem.  The spinlock is
+used as follows.
+
+Before starting a test, a manager-station should make
+sure that a test is not in progress as follows:
+
+    try_again:
+      get (upsTestSpinLock)
+      while (upsTestResultsSummary == inProgress) {
+        /* loop while a test is running for another
+manager */
+        short delay
+        get (upsTestSpinLock)
+      }
+      lock_value = upsTestSpinLock
+      /* no test in progress, start the test */
+      set (upsTestSpinLock = lock_value, upsTestId =
+requested_test)
+      if (error_index == 1) { /* (upsTestSpinLock
+failed) */
+        /* if problem is not access control, then
+            some other manager slipped in ahead of us
+*/
+        goto try_again
+      }
+      if (error_index == 2) { /* (upsTestId) */
+        /* cannot perform the test */
+        give up
+      }
+      /* test started ok */
+      /* wait for test completion by polling
+upsTestResultsSummary */
+      get (upsTestSpinLock, upsTestResultsSummary,
+upsTestResultsDetail)
+      while (upsTestResultsSummary == inProgress) {
+        short delay
+        get (upsTestSpinLock, upsTestResultsSummary,
+upsTestResultsDetail)
+      }
+      /* when test completes, retrieve any additional
+test results */
+      /* if upsTestSpinLock == lock_value + 1, then
+these are our test */
+      /* results (as opposed to another manager's */
+      The initial value of upsTestSpinLock at agent
+initialization shall
+      be 1.""",
+        }, # scalar
+        "upsTestResultsSummary" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.7.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "donePass" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "doneWarning" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "doneError" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "aborted" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "inProgress" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "noTestsInitiated" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The results of the current or last UPS diagnostics
+test performed.  The values for donePass(1),
+doneWarning(2), and doneError(3) indicate that the
+test completed either successfully, with a warning, or
+with an error, respectively.  The value aborted(4) is
+returned for tests which are aborted by setting the
+value of upsTestId to upsTestAbortTestInProgress.
+Tests which have not yet concluded are indicated by
+inProgress(5).  The value noTestsInitiated(6)
+indicates that no previous test results are available,
+such as is the case when no tests have been run since
+the last reinitialization of the network management
+subsystem and the system has no provision for non-
+volatile storage of test results.""",
+        }, # scalar
+        "upsTestResultsDetail" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.7.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMPv2-TC",
+                        "type" : "DisplayString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Additional information about upsTestResultsSummary.
+If no additional information available, a zero length
+string is returned.""",
+        }, # scalar
+        "upsTestStartTime" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.7.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime at the time the test in
+progress was initiated, or, if no test is in progress,
+the time the previous test was initiated.  If the
+value of upsTestResultsSummary is noTestsInitiated(6),
+upsTestStartTime has the value 0.""",
+        }, # scalar
+        "upsTestElapsedTime" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.7.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeInterval"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The amount of time, in TimeTicks, since the test in
+progress was initiated, or, if no test is in progress,
+the previous test took to complete.  If the value of
+upsTestResultsSummary is noTestsInitiated(6),
+upsTestElapsedTime has the value 0.""",
+        }, # scalar
+        "upsWellKnownTests" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.7.7",
+        }, # node
+        "upsTestNoTestsInitiated" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.7.7.1",
+            "status" : "current",
+            "description" :
+                """No tests have been initiated and no test is in
+progress.""",
+        }, # node
+        "upsTestAbortTestInProgress" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.7.7.2",
+            "status" : "current",
+            "description" :
+                """The test in progress is to be aborted / the test in
+progress was aborted.""",
+        }, # node
+        "upsTestGeneralSystemsTest" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.7.7.3",
+            "status" : "current",
+            "description" :
+                """The manufacturer's standard test of UPS device
+systems.""",
+        }, # node
+        "upsTestQuickBatteryTest" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.7.7.4",
+            "status" : "current",
+            "description" :
+                """A test that is sufficient to determine if the battery
+needs replacement.""",
+        }, # node
+        "upsTestDeepBatteryCalibration" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.7.7.5",
+            "status" : "current",
+            "description" :
+                """The system is placed on battery to a discharge level,
+set by the manufacturer, sufficient to determine
+battery replacement and battery run-time with a high
+degree of confidence.  WARNING:  this test will leave
+the battery in a low charge state and will require
+time for recharging to a level sufficient to provide
+normal battery duration for the protected load.""",
+        }, # node
+        "upsControl" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.8",
+        }, # node
+        "upsShutdownType" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.8.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "output" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "system" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object determines the nature of the action to be
+taken at the time when the countdown of the
+upsShutdownAfterDelay and upsRebootWithDuration
+objects reaches zero.
+
+Setting this object to output(1) indicates that
+shutdown requests should cause only the output of the
+UPS to turn off.  Setting this object to system(2)
+indicates that shutdown requests will cause the entire
+UPS system to turn off.""",
+        }, # scalar
+        "upsShutdownAfterDelay" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.8.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "units" : "seconds",
+            "description" :
+                """Setting this object will shutdown (i.e., turn off)
+either the UPS output or the UPS system (as determined
+by the value of upsShutdownType at the time of
+shutdown) after the indicated number of seconds, or
+less if the UPS batteries become depleted. Setting
+this object to 0 will cause the shutdown to occur
+immediately.  Setting this object to -1 will abort the
+countdown.  If the system is already in the desired
+state at the time the countdown reaches 0, then
+nothing will happen.  That is, there is no additional
+action at that time if upsShutdownType = system and
+the system is already off.  Similarly, there is no
+additional action at that time if upsShutdownType =
+output and the output is already off.  When read,
+upsShutdownAfterDelay will return the number of
+seconds remaining until shutdown, or -1 if no shutdown
+countdown is in effect.  On some systems, if the agent
+is restarted while a shutdown countdown is in effect,
+the countdown may be aborted.  Sets to this object
+override any upsShutdownAfterDelay already in effect.""",
+        }, # scalar
+        "upsStartupAfterDelay" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.8.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "units" : "seconds",
+            "description" :
+                """Setting this object will start the output after the
+indicated number of seconds, including starting the
+UPS, if necessary.  Setting this object to 0 will
+cause the startup to occur immediately.  Setting this
+object to -1 will abort the countdown.  If the output
+is already on at the time the countdown reaches 0,
+then nothing will happen.  Sets to this object
+override the effect of any upsStartupAfterDelay
+countdown or upsRebootWithDuration countdown in
+progress.  When read, upsStartupAfterDelay will return
+the number of seconds until startup, or -1 if no
+startup countdown is in effect.  If the countdown
+expires during a utility failure, the startup shall
+not occur until the utility power is restored.  On
+some systems, if the agent is restarted while a
+startup countdown is in effect, the countdown is
+aborted.""",
+        }, # scalar
+        "upsRebootWithDuration" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.8.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-1",
+                        "max" : "300"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-1",
+                        "max" : "300"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "units" : "seconds",
+            "description" :
+                """Setting this object will immediately shutdown (i.e.,
+turn off) either the UPS output or the UPS system (as
+determined by the value of upsShutdownType at the time
+of shutdown) for a period equal to the indicated
+number of seconds, after which time the output will be
+started, including starting the UPS, if necessary.  If
+the number of seconds required to perform the request
+is greater than the requested duration, then the
+requested shutdown and startup cycle shall be
+performed in the minimum time possible, but in no case
+shall this require more than the requested duration
+plus 60 seconds.  When read, upsRebootWithDuration
+shall return the number of seconds remaining in the
+countdown, or -1 if no countdown is in progress.  If
+the startup should occur during a utility failure, the
+startup shall not occur until the utility power is
+restored.""",
+        }, # scalar
+        "upsAutoRestart" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.8.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "on" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "off" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """Setting this object to 'on' will cause the UPS system
+to restart after a shutdown if the shutdown occurred
+during a power loss as a result of either a
+upsShutdownAfterDelay or an internal battery depleted
+condition.  Setting this object to 'off' will prevent
+the UPS system from restarting after a shutdown until
+an operator manually or remotely explicitly restarts
+it.  If the UPS is in a startup or reboot countdown,
+then the UPS will not restart until that delay has
+been satisfied.""",
+        }, # scalar
+        "upsConfig" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.9",
+        }, # node
+        "upsConfigInputVoltage" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.9.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readwrite",
+            "units" : "RMS Volts",
+            "description" :
+                """The magnitude of the nominal input voltage.  On those
+systems which support read-write access to this
+object, if there is an attempt to set this variable to
+a value that is not supported, the request must be
+rejected and the agent shall respond with an
+appropriate error message, i.e., badValue for SNMPv1,
+or inconsistentValue for SNMPv2.""",
+        }, # scalar
+        "upsConfigInputFreq" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.9.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readwrite",
+            "units" : "0.1 Hertz",
+            "description" :
+                """The nominal input frequency.  On those systems which
+support read-write access to this object, if there is
+an attempt to set this variable to a value that is not
+supported, the request must be rejected and the agent
+shall respond with an appropriate error message, i.e.,
+badValue for SNMPv1, or inconsistentValue for SNMPv2.""",
+        }, # scalar
+        "upsConfigOutputVoltage" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.9.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readwrite",
+            "units" : "RMS Volts",
+            "description" :
+                """The magnitude of the nominal output voltage.  On
+those systems which support read-write access to this
+object, if there is an attempt to set this variable to
+a value that is not supported, the request must be
+rejected and the agent shall respond with an
+appropriate error message, i.e., badValue for SNMPv1,
+or inconsistentValue for SNMPv2.""",
+        }, # scalar
+        "upsConfigOutputFreq" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.9.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readwrite",
+            "units" : "0.1 Hertz",
+            "description" :
+                """The nominal output frequency.  On those systems which
+support read-write access to this object, if there is
+an attempt to set this variable to a value that is not
+supported, the request must be rejected and the agent
+shall respond with an appropriate error message, i.e.,
+badValue for SNMPv1, or inconsistentValue for SNMPv2.""",
+        }, # scalar
+        "upsConfigOutputVA" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.9.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readonly",
+            "units" : "Volt-Amps",
+            "description" :
+                """The magnitude of the nominal Volt-Amp rating.""",
+        }, # scalar
+        "upsConfigOutputPower" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.9.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readonly",
+            "units" : "Watts",
+            "description" :
+                """The magnitude of the nominal true power rating.""",
+        }, # scalar
+        "upsConfigLowBattTime" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.9.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readwrite",
+            "units" : "minutes",
+            "description" :
+                """The value of upsEstimatedMinutesRemaining at which a
+lowBattery condition is declared.  For agents which
+support only discrete (discontinuous) values, then the
+agent shall round up to the next supported value.  If
+the requested value is larger than the largest
+supported value, then the largest supported value
+shall be selected.""",
+        }, # scalar
+        "upsConfigAudibleStatus" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.9.8",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "disabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "enabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "muted" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The requested state of the audible alarm.  When in
+the disabled state, the audible alarm should never
+sound.  The enabled state is self-describing.  Setting
+this object to muted(3) when the audible alarm is
+sounding shall temporarily silence the alarm.  It will
+remain muted until it would normally stop sounding and
+the value returned for read operations during this
+period shall equal muted(3).  At the end of this
+period, the value shall revert to enabled(2).  Writes
+of the value muted(3) when the audible alarm is not
+sounding shall be accepted but otherwise shall have no
+effect.""",
+        }, # scalar
+        "upsConfigLowVoltageTransferPoint" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.9.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readwrite",
+            "units" : "RMS Volts",
+            "description" :
+                """The minimum input line voltage allowed before the UPS
+system transfers to battery backup.""",
+        }, # scalar
+        "upsConfigHighVoltageTransferPoint" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.1.9.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"UPS-MIB", "name" : "NonNegativeInteger"},
+            },
+            "access" : "readwrite",
+            "units" : "RMS Volts",
+            "description" :
+                """The maximum line voltage allowed before the UPS
+system transfers to battery backup.""",
+        }, # scalar
+        "upsTraps" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.2",
+        }, # node
+        "upsConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3",
+        }, # node
+        "upsCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.1",
+        }, # node
+        "upsGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2",
+        }, # node
+        "upsSubsetGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.1",
+        }, # node
+        "upsBasicGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.2",
+        }, # node
+        "upsFullGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.3",
+        }, # node
+    }, # nodes
+
+    "notifications" : {
+        "upsTrapOnBattery" : {
+            "nodetype" : "notification",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.2.1",
+            "status" : "current",
+            "objects" : {
+                "upsEstimatedMinutesRemaining" : {
+                    "nodetype" : "object",
+                    "module" : "UPS-MIB"
+                },
+                "upsSecondsOnBattery" : {
+                    "nodetype" : "object",
+                    "module" : "UPS-MIB"
+                },
+                "upsConfigLowBattTime" : {
+                    "nodetype" : "object",
+                    "module" : "UPS-MIB"
+                },
+            },
+            "description" :
+                """The UPS is operating on battery power.  This trap is
+persistent and is resent at one minute intervals until
+the UPS either turns off or is no longer running on
+battery.""",
+        }, # notification
+        "upsTrapTestCompleted" : {
+            "nodetype" : "notification",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.2.2",
+            "status" : "current",
+            "objects" : {
+                "upsTestId" : {
+                    "nodetype" : "object",
+                    "module" : "UPS-MIB"
+                },
+                "upsTestSpinLock" : {
+                    "nodetype" : "object",
+                    "module" : "UPS-MIB"
+                },
+                "upsTestResultsSummary" : {
+                    "nodetype" : "object",
+                    "module" : "UPS-MIB"
+                },
+                "upsTestResultsDetail" : {
+                    "nodetype" : "object",
+                    "module" : "UPS-MIB"
+                },
+                "upsTestStartTime" : {
+                    "nodetype" : "object",
+                    "module" : "UPS-MIB"
+                },
+                "upsTestElapsedTime" : {
+                    "nodetype" : "object",
+                    "module" : "UPS-MIB"
+                },
+            },
+            "description" :
+                """This trap is sent upon completion of a UPS diagnostic
+test.""",
+        }, # notification
+        "upsTrapAlarmEntryAdded" : {
+            "nodetype" : "notification",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.2.3",
+            "status" : "current",
+            "objects" : {
+                "upsAlarmId" : {
+                    "nodetype" : "object",
+                    "module" : "UPS-MIB"
+                },
+                "upsAlarmDescr" : {
+                    "nodetype" : "object",
+                    "module" : "UPS-MIB"
+                },
+            },
+            "description" :
+                """This trap is sent each time an alarm is inserted into
+to the alarm table.  It is sent on the insertion of
+all alarms except for upsAlarmOnBattery and
+upsAlarmTestInProgress.""",
+        }, # notification
+        "upsTrapAlarmEntryRemoved" : {
+            "nodetype" : "notification",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.2.4",
+            "status" : "current",
+            "objects" : {
+                "upsAlarmId" : {
+                    "nodetype" : "object",
+                    "module" : "UPS-MIB"
+                },
+                "upsAlarmDescr" : {
+                    "nodetype" : "object",
+                    "module" : "UPS-MIB"
+                },
+            },
+            "description" :
+                """This trap is sent each time an alarm is removed from
+the alarm table.  It is sent on the removal of all
+alarms except for upsAlarmTestInProgress.""",
+        }, # notification
+    }, # notifications
+
+    "groups" : {
+        "upsSubsetIdentGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.1.1",
+            "status" : "current",
+            "members" : {
+                "upsIdentManufacturer" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsIdentModel" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsIdentAgentSoftwareVersion" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsIdentName" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsIdentAttachedDevices" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsSubsetIdentGroup defines objects which are
+common across all UPSs which meet subset compliance.
+Most devices which conform to the upsSubsetIdentGroup
+will provide access to these objects via a proxy
+agent.  If the proxy agent is compatible with multiple
+UPS types, configuration of the proxy agent will
+require specifying some of these values, either
+individually, or as a group (perhaps through a table
+lookup mechanism based on the UPS model number).""",
+        }, # group
+        "upsSubsetBatteryGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.1.2",
+            "status" : "current",
+            "members" : {
+                "upsBatteryStatus" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsSecondsOnBattery" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsSubsetBatteryGroup defines the objects that
+are common to battery groups of two-contact UPSs.""",
+        }, # group
+        "upsSubsetInputGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.1.3",
+            "status" : "current",
+            "members" : {
+                "upsInputLineBads" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsSubsetInputGroup defines the objects that are
+common to the Input groups of two-contact UPSs.""",
+        }, # group
+        "upsSubsetOutputGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.1.4",
+            "status" : "current",
+            "members" : {
+                "upsOutputSource" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsSubsetOutputGroup defines the objects that are
+common to the Output groups of two-contact UPSs.""",
+        }, # group
+        "upsSubsetAlarmGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.1.6",
+            "status" : "current",
+            "members" : {
+                "upsAlarmsPresent" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsAlarmDescr" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsAlarmTime" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsSubsetAlarmGroup defines the objects that are
+common to the Alarm groups of two-contact UPSs.""",
+        }, # group
+        "upsSubsetControlGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.1.8",
+            "status" : "current",
+            "members" : {
+                "upsShutdownType" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsShutdownAfterDelay" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsAutoRestart" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsSubsetControlGroup defines the objects that
+are common to the Control groups of two-contact UPSs.""",
+        }, # group
+        "upsSubsetConfigGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.1.9",
+            "status" : "current",
+            "members" : {
+                "upsConfigInputVoltage" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsConfigInputFreq" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsConfigOutputVoltage" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsConfigOutputFreq" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsConfigOutputVA" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsConfigOutputPower" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsSubsetConfigGroup defines the objects that are
+common to the Config groups of two-contact UPSs.""",
+        }, # group
+        "upsBasicIdentGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.2.1",
+            "status" : "current",
+            "members" : {
+                "upsIdentManufacturer" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsIdentModel" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsIdentUPSSoftwareVersion" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsIdentAgentSoftwareVersion" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsIdentName" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsBasicIdentGroup defines objects which are
+common to the Ident group of compliant UPSs which
+support basic functions.""",
+        }, # group
+        "upsBasicBatteryGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.2.2",
+            "status" : "current",
+            "members" : {
+                "upsBatteryStatus" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsSecondsOnBattery" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsBasicBatteryGroup defines the objects that are
+common to the battery groups of compliant UPSs which
+support basic functions.""",
+        }, # group
+        "upsBasicInputGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.2.3",
+            "status" : "current",
+            "members" : {
+                "upsInputLineBads" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsInputNumLines" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsInputFrequency" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsInputVoltage" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsBasicInputGroup defines the objects that are
+common to the Input groups of compliant UPSs which
+support basic functions.""",
+        }, # group
+        "upsBasicOutputGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.2.4",
+            "status" : "current",
+            "members" : {
+                "upsOutputSource" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsOutputFrequency" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsOutputNumLines" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsOutputVoltage" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsBasicOutputGroup defines the objects that are
+common to the Output groups of compliant UPSs which
+support basic functions.""",
+        }, # group
+        "upsBasicBypassGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.2.5",
+            "status" : "current",
+            "members" : {
+                "upsBypassFrequency" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsBypassNumLines" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsBypassVoltage" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsBasicBypassGroup defines the objects that are
+common to the Bypass groups of compliant UPSs which
+support basic functions.""",
+        }, # group
+        "upsBasicAlarmGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.2.6",
+            "status" : "current",
+            "members" : {
+                "upsAlarmsPresent" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsAlarmDescr" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsAlarmTime" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsBasicAlarmGroup defines the objects that are
+common to the Alarm  groups of compliant UPSs which
+support basic functions.""",
+        }, # group
+        "upsBasicTestGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.2.7",
+            "status" : "current",
+            "members" : {
+                "upsTestId" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsTestSpinLock" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsTestResultsSummary" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsTestResultsDetail" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsTestStartTime" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsTestElapsedTime" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsBasicTestGroup defines the objects that are
+common to the Test groups of compliant UPSs which
+support basic functions.""",
+        }, # group
+        "upsBasicControlGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.2.8",
+            "status" : "current",
+            "members" : {
+                "upsShutdownType" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsShutdownAfterDelay" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsStartupAfterDelay" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsRebootWithDuration" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsAutoRestart" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsBasicControlGroup defines the objects that are
+common to the Control groups of compliant UPSs which
+support basic functions.""",
+        }, # group
+        "upsBasicConfigGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.2.9",
+            "status" : "current",
+            "members" : {
+                "upsConfigInputVoltage" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsConfigInputFreq" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsConfigOutputVoltage" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsConfigOutputFreq" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsConfigOutputVA" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsConfigOutputPower" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsConfigLowBattTime" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsConfigAudibleStatus" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsBasicConfigGroup defines the objects that are
+common to the Config groups of UPSs which support
+basic functions.""",
+        }, # group
+        "upsFullIdentGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.3.1",
+            "status" : "current",
+            "members" : {
+                "upsIdentManufacturer" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsIdentModel" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsIdentUPSSoftwareVersion" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsIdentAgentSoftwareVersion" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsIdentName" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsIdentAttachedDevices" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsFullIdentGroup defines objects which are
+common to the Ident group of fully compliant UPSs.""",
+        }, # group
+        "upsFullBatteryGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.3.2",
+            "status" : "current",
+            "members" : {
+                "upsBatteryStatus" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsSecondsOnBattery" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsEstimatedMinutesRemaining" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsEstimatedChargeRemaining" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsFullBatteryGroup defines the objects that are
+common to the battery groups of fully compliant UPSs.""",
+        }, # group
+        "upsFullInputGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.3.3",
+            "status" : "current",
+            "members" : {
+                "upsInputLineBads" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsInputNumLines" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsInputFrequency" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsInputVoltage" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsFullInputGroup defines the objects that are
+common to the Input groups of fully compliant UPSs.""",
+        }, # group
+        "upsFullOutputGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.3.4",
+            "status" : "current",
+            "members" : {
+                "upsOutputSource" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsOutputFrequency" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsOutputNumLines" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsOutputVoltage" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsOutputCurrent" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsOutputPower" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsOutputPercentLoad" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsFullOutputGroup defines the objects that are
+common to the Output groups of fully compliant UPSs.""",
+        }, # group
+        "upsFullBypassGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.3.5",
+            "status" : "current",
+            "members" : {
+                "upsBypassFrequency" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsBypassNumLines" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsBypassVoltage" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsFullBypassGroup defines the objects that are
+common to the Bypass groups of fully compliant UPSs.""",
+        }, # group
+        "upsFullAlarmGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.3.6",
+            "status" : "current",
+            "members" : {
+                "upsAlarmsPresent" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsAlarmDescr" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsAlarmTime" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsFullAlarmGroup defines the objects that are
+common to the Alarm  groups of fully compliant UPSs.""",
+        }, # group
+        "upsFullTestGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.3.7",
+            "status" : "current",
+            "members" : {
+                "upsTestId" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsTestSpinLock" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsTestResultsSummary" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsTestResultsDetail" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsTestStartTime" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsTestElapsedTime" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsFullTestGroup defines the objects that are
+common to the Test groups of fully compliant UPSs.""",
+        }, # group
+        "upsFullControlGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.3.8",
+            "status" : "current",
+            "members" : {
+                "upsShutdownType" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsShutdownAfterDelay" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsStartupAfterDelay" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsRebootWithDuration" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsAutoRestart" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsFullControlGroup defines the objects that are
+common to the Control groups of fully compliant UPSs.""",
+        }, # group
+        "upsFullConfigGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.2.3.9",
+            "status" : "current",
+            "members" : {
+                "upsConfigInputVoltage" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsConfigInputFreq" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsConfigOutputVoltage" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsConfigOutputFreq" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsConfigOutputVA" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsConfigOutputPower" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsConfigLowBattTime" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+                "upsConfigAudibleStatus" : {
+                    "nodetype" : "member",
+                    "module" : "UPS-MIB"
+                },
+            }, # members
+            "description" :
+                """The upsFullConfigGroup defines the objects that are
+common to the Config groups of fully compliant UPSs.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "upsSubsetCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.1.1",
+            "status" : "current",
+            "description" :
+                """The compliance statement for UPSs that only support
+the two-contact communication protocol.""",
+            "requires" : {
+                "upsSubsetIdentGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+                "upsSubsetBatteryGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+                "upsSubsetInputGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+                "upsSubsetOutputGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+                "upsSubsetAlarmGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+                "upsSubsetControlGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+                "upsSubsetConfigGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+            }, # requires
+            "refinements" : {
+                "upsBatteryStatus" : {
+                    "module" : "UPS-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "batteryNormal" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                            "batteryLow" : {
+                                "nodetype" : "namednumber",
+                                "number" : "3"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """Support of the values unknown(1) and
+batteryDepleted(4) is not required.""",
+                },
+                "upsAlarmDescr" : {
+                    "module" : "UPS-MIB",
+                    "description" :
+                        """Support of all `well known' alarm types is not
+required.  The well known alarm types which must be
+supported are: upsAlarmOnBattery, upsAlarmLowBattery,
+upsAlarmInputBad, upsAlarmUpsOutputOff,
+upsAlarmUpsSystemOff, and upsAlarmTestInProgress.""",
+                },
+                "upsOutputSource" : {
+                    "module" : "UPS-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "normal" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                            "battery" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """Support of the values other(1), none(2), bypass(4),
+booster(6) and reducer(7) is not required.""",
+                },
+                "upsShutdownType" : {
+                    "module" : "UPS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Read-write access is not required, i.e., compliant
+systems need not support more than one shutdown type.""",
+                },
+                "upsAutoRestart" : {
+                    "module" : "UPS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Read-write access is not required, i.e., compliant
+systems need not support more than one restart type.""",
+                },
+                "upsConfigInputVoltage" : {
+                    "module" : "UPS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Read-write access is not required.""",
+                },
+                "upsConfigInputFreq" : {
+                    "module" : "UPS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Read-write access is not required.""",
+                },
+                "upsConfigOutputVoltage" : {
+                    "module" : "UPS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Read-write access is not required.""",
+                },
+                "upsConfigOutputFreq" : {
+                    "module" : "UPS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Read-write access is not required.""",
+                },
+            }, # refinements
+
+        }, # compliance
+        "upsBasicCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.1.2",
+            "status" : "current",
+            "description" :
+                """The compliance statement for UPSs that support
+full-featured functions, such as control.""",
+            "requires" : {
+                "upsBasicIdentGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+                "upsBasicBatteryGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+                "upsBasicInputGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+                "upsBasicOutputGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+                "upsBasicAlarmGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+                "upsBasicTestGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+                "upsBasicControlGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+                "upsBasicConfigGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+                "upsBasicBypassGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "UPS-MIB",
+                    "description" :
+                        """The upsBasicBypassGroup is only required for UPSs
+that have a Bypass present.""",
+                },
+            }, # requires
+            "refinements" : {
+                "upsAlarmDescr" : {
+                    "module" : "UPS-MIB",
+                    "description" :
+                        """Support of all `well known' alarm types is not
+required.  The well known alarm types which must be
+supported are: upsAlarmOnBattery, upsAlarmLowBattery,
+upsAlarmDepletedBattery, upsAlarmTempBad,
+upsAlarmInputBad, upsAlarmOutputOverload,
+upsAlarmOnBypass, upsAlarmBypassBad,
+upsAlarmOutputOffAsRequested,
+upsAlarmUpsOffAsRequested, upsAlarmUpsOutputOff,
+upsAlarmUpsSystemOff, upsAlarmGeneralFault,
+upsAlarmDiagnosticTestFailed,
+upsAlarmCommunicationsLost, upsAlarmShutdownPending,
+and upsAlarmTestInProgress.""",
+                },
+                "upsTestId" : {
+                    "module" : "UPS-MIB",
+                    "description" :
+                        """Support of all `well known' test types is not
+required.  If no tests are supported, then the only
+well known test type which must be supported is
+upsTestNoTestsInitiated.""",
+                },
+                "upsOutputSource" : {
+                    "module" : "UPS-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "normal" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                            "battery" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """Support of the values other(1), none(2), bypass(4),
+booster(6) and reducer(7) is not required.""",
+                },
+                "upsShutdownType" : {
+                    "module" : "UPS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Read-write access is not required, i.e., compliant
+systems need not support more than one shutdown type.""",
+                },
+                "upsAutoRestart" : {
+                    "module" : "UPS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Read-write access is not required, i.e., compliant
+systems need not support more than one restart type.""",
+                },
+                "upsConfigInputVoltage" : {
+                    "module" : "UPS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Read-write access is not required.""",
+                },
+                "upsConfigInputFreq" : {
+                    "module" : "UPS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Read-write access is not required.""",
+                },
+                "upsConfigOutputVoltage" : {
+                    "module" : "UPS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Read-write access is not required.""",
+                },
+                "upsConfigOutputFreq" : {
+                    "module" : "UPS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Read-write access is not required.""",
+                },
+                "upsConfigLowBattTime" : {
+                    "module" : "UPS-MIB",
+                    "description" :
+                        """Implementation of all possible values may be onerous
+for some systems.  Consequently, not all possible
+values must be supported.  However, at least two
+different manufacturer-selected values must be
+supported.""",
+                },
+            }, # refinements
+
+        }, # compliance
+        "upsFullCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "UPS-MIB",
+            "oid" : "1.3.6.1.2.1.33.3.1.3",
+            "status" : "current",
+            "description" :
+                """The compliance statement for UPSs that support
+advanced full-featured functions.""",
+            "requires" : {
+                "upsFullIdentGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+                "upsFullBatteryGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+                "upsFullInputGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+                "upsFullOutputGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+                "upsFullAlarmGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+                "upsFullTestGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+                "upsFullControlGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+                "upsFullConfigGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UPS-MIB"
+                },
+                "upsFullBypassGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "UPS-MIB",
+                    "description" :
+                        """The upsFullBypassGroup is only required for UPSs that
+have a Bypass present.""",
+                },
+            }, # requires
+            "refinements" : {
+                "upsAlarmDescr" : {
+                    "module" : "UPS-MIB",
+                    "description" :
+                        """Support of all `well known' alarm types is not
+required.  The well known alarm types which must be
+supported are: upsAlarmBatteryBad, upsAlarmOnBattery,
+upsAlarmLowBattery, upsAlarmDepletedBattery,
+upsAlarmTempBad, upsAlarmInputBad, upsAlarmOnBypass,
+upsAlarmBypassBad, upsAlarmOutputOffAsRequested,
+upsAlarmUpsOffAsRequested, upsAlarmUpsOutputOff,
+upsAlarmUpsSystemOff, upsAlarmGeneralFault,
+upsAlarmDiagnosticTestFailed,
+upsAlarmCommunicationsLost, upsAlarmShutdownPending,
+and upsAlarmTestInProgress.""",
+                },
+                "upsTestId" : {
+                    "module" : "UPS-MIB",
+                    "description" :
+                        """Support of all `well known' test types is not
+required.  The well known test types which must be
+supported are: upsTestNoTestsInitiated,
+upsTestGeneralSystemsTest, and
+upsTestQuickBatteryTest.""",
+                },
+                "upsOutputSource" : {
+                    "module" : "UPS-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "normal" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                            "battery" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """Support of the values other(1), none(2), bypass(4),
+booster(6) and reducer(7) is not required.""",
+                },
+                "upsShutdownType" : {
+                    "module" : "UPS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Read-write access is not required, i.e., compliant
+systems need not support more than one shutdown type.""",
+                },
+                "upsAutoRestart" : {
+                    "module" : "UPS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Read-write access is not required, i.e., compliant
+systems need not support more than one restart type.""",
+                },
+                "upsConfigInputVoltage" : {
+                    "module" : "UPS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Read-write access is not required.""",
+                },
+                "upsConfigInputFreq" : {
+                    "module" : "UPS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Read-write access is not required.""",
+                },
+                "upsConfigOutputVoltage" : {
+                    "module" : "UPS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Read-write access is not required.""",
+                },
+                "upsConfigOutputFreq" : {
+                    "module" : "UPS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Read-write access is not required.""",
+                },
+                "upsConfigLowBattTime" : {
+                    "module" : "UPS-MIB",
+                    "description" :
+                        """Implementation of all possible values may be onerous
+for some systems.  Consequently, not all possible
+values must be supported.  However, at least two
+different manufacturer-selected values must be
+supported.""",
+                },
+            }, # refinements
+
+        }, # compliance
+    }, # compliances
+
+}