logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/UDPLITE-MIB.dic

@@ -0,0 +1,704 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python UDPLITE-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/UDPLITE-MIB"
+
+MIB = {
+    "moduleName" : "UDPLITE-MIB",
+
+    "UDPLITE-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF TSV Working Group (TSVWG)""",
+        "contact" : 
+            """IETF TSV Working Group
+http://www.ietf.org/html.charters/tsvwg-charter.html
+Mailing List: tsvwg@ietf.org
+
+
+
+
+Gerrit Renker, Godred Fairhurst
+Electronics Research Group
+School of Engineering, University of Aberdeen
+Fraser Noble Building, Aberdeen AB24 3UE, UK""",
+        "description" :
+            """The MIB module for managing UDP-Lite implementations.
+Copyright (C) The IETF Trust (2008).  This version of
+this MIB module is part of RFC 5097; see the RFC
+itself for full legal notices.""",
+        "revisions" : (
+            {
+                "date" : "2007-12-18 00:00",
+                "description" :
+                    """Initial SMIv2 revision, based on the format of the UDP
+MIB module (RFC 4113) and published as RFC 5097.""",
+            },
+        ),
+        "identity node" : "udpliteMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "mib-2"},
+        {"module" : "SNMPv2-SMI", "name" : "Unsigned32"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter32"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter64"},
+        {"module" : "SNMPv2-TC", "name" : "TimeStamp"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetAddress"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetAddressType"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetPortNumber"},
+    ),
+
+    "nodes" : {
+        "udpliteMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170",
+            "status" : "current",
+        }, # node
+        "udplite" : {
+            "nodetype" : "node",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.1",
+        }, # node
+        "udpliteInDatagrams" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The total number of UDP-Lite datagrams that were
+delivered to UDP-Lite users.
+Discontinuities in the value of this counter can occur
+at re-initialisation of the management system, and at
+other times as indicated by the value of
+udpliteStatsDiscontinuityTime.""",
+        }, # scalar
+        "udpliteInPartialCov" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The total number of UDP-Lite datagrams that were
+delivered to UDP-Lite users (applications) and whose
+checksum coverage was strictly less than the datagram
+length.
+Discontinuities in the value of this counter can occur
+at re-initialisation of the management system, and at
+other times as indicated by the value of
+udpliteStatsDiscontinuityTime.""",
+        }, # scalar
+        "udpliteNoPorts" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The total number of received UDP-Lite datagrams for
+which there was no listener at the destination port.
+Discontinuities in the value of this counter can occur
+at re-initialisation of the management system, and at
+other times as indicated by the value of
+udpliteStatsDiscontinuityTime.""",
+        }, # scalar
+        "udpliteInErrors" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of received UDP-Lite datagrams that could not
+be delivered for reasons other than the lack of an
+application at the destination port.
+Discontinuities in the value of this counter can occur
+at re-initialisation of the management system, and at
+other times as indicated by the value of
+udpliteStatsDiscontinuityTime.""",
+        }, # scalar
+        "udpliteInBadChecksum" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of received UDP-Lite datagrams whose checksum
+could not be validated.  This includes illegal checksum
+coverage values, as their use would lead to incorrect
+checksums.
+Discontinuities in the value of this counter can occur
+at re-initialisation of the management system, and at
+other times as indicated by the value of
+udpliteStatsDiscontinuityTime.""",
+            "reference" :
+                """RFC 3828, section 3.1""",
+        }, # scalar
+        "udpliteOutDatagrams" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The total number of UDP-Lite datagrams sent from this
+entity.
+Discontinuities in the value of this counter can occur
+at re-initialisation of the management system, and at
+other times as indicated by the value of
+udpliteStatsDiscontinuityTime.""",
+        }, # scalar
+        "udpliteOutPartialCov" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The total number of udpliteOutDatagrams whose
+checksum coverage was strictly less than the
+datagram length.
+Discontinuities in the value of this counter can occur
+at re-initialisation of the management system, and at
+other times as indicated by the value of
+udpliteStatsDiscontinuityTime.""",
+        }, # scalar
+        "udpliteEndpointTable" : {
+            "nodetype" : "table",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.1.8",
+            "status" : "current",
+            "description" :
+                """A table containing information about this entity's
+UDP-Lite endpoints on which a local application is
+currently accepting or sending datagrams.
+
+The address type in this table represents the address
+type used for the communication, irrespective of the
+higher-layer abstraction.  For example, an application
+using IPv6 'sockets' to communicate via IPv4 between
+::ffff:10.0.0.1 and ::ffff:10.0.0.2 would use
+InetAddressType ipv4(1).
+
+Like the udpTable in RFC 4113, this table also allows
+the representation of an application that completely
+specifies both local and remote addresses and ports.  A
+listening application is represented in three possible
+ways:
+
+1) An application that is willing to accept both IPv4
+   and IPv6 datagrams is represented by a
+   udpliteEndpointLocalAddressType of unknown(0) and a
+   udpliteEndpointLocalAddress of ''h (a zero-length
+
+
+
+   octet-string).
+
+2) An application that is willing to accept only IPv4
+   or only IPv6 datagrams is represented by a
+   udpliteEndpointLocalAddressType of the appropriate
+   address type and a udpliteEndpointLocalAddress of
+   '0.0.0.0' or '::' respectively.
+
+3) An application that is listening for datagrams only
+   for a specific IP address but from any remote
+   system is represented by a
+   udpliteEndpointLocalAddressType of the appropriate
+   address type, with udpliteEndpointLocalAddress
+   specifying the local address.
+
+In all cases where the remote address is a wildcard,
+the udpliteEndpointRemoteAddressType is unknown(0),
+the udpliteEndpointRemoteAddress is ''h (a zero-length
+octet-string), and the udpliteEndpointRemotePort is 0.
+
+If the operating system is demultiplexing UDP-Lite
+packets by remote address/port, or if the application
+has 'connected' the socket specifying a default remote
+address/port, the udpliteEndpointRemote* values should
+be used to reflect this.""",
+        }, # table
+        "udpliteEndpointEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.1.8.1",
+            "status" : "current",
+            "linkage" : [
+                "udpliteEndpointLocalAddressType",
+                "udpliteEndpointLocalAddress",
+                "udpliteEndpointLocalPort",
+                "udpliteEndpointRemoteAddressType",
+                "udpliteEndpointRemoteAddress",
+                "udpliteEndpointRemotePort",
+                "udpliteEndpointInstance",
+            ],
+            "description" :
+                """Information about a particular current UDP-Lite endpoint.
+Implementers need to pay attention to the sizes of
+udpliteEndpointLocalAddress/RemoteAddress, as Object
+Identifiers (OIDs) of column instances in this table must
+have no more than 128 sub-identifiers in order to remain
+ accessible with SNMPv1, SNMPv2c, and SNMPv3.""",
+        }, # row
+        "udpliteEndpointLocalAddressType" : {
+            "nodetype" : "column",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.1.8.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddressType"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The address type of udpliteEndpointLocalAddress.  Only
+IPv4, IPv4z, IPv6, and IPv6z addresses are expected, or
+unknown(0) if datagrams for all local IP addresses are
+accepted.""",
+        }, # column
+        "udpliteEndpointLocalAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.1.8.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddress"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The local IP address for this UDP-Lite endpoint.
+
+The value of this object can be represented in three
+possible ways, depending on the characteristics of the
+listening application:
+
+1. For an application that is willing to accept both
+   IPv4 and IPv6 datagrams, the value of this object
+   must be ''h (a zero-length octet-string), with
+   the value of the corresponding instance of the
+   EndpointLocalAddressType object being unknown(0).
+
+2. For an application that is willing to accept only
+   IPv4 or only IPv6 datagrams, the value of this
+   object must be '0.0.0.0' or '::', respectively,
+   while the corresponding instance of the
+   EndpointLocalAddressType object represents the
+   appropriate address type.
+
+3. For an application that is listening for data
+
+
+
+   destined only to a specific IP address, the value
+   of this object is the specific IP address for
+   which this node is receiving packets, with the
+   corresponding instance of the
+   EndpointLocalAddressType object representing the
+   appropriate address type.
+
+As this object is used in the index for the
+udpliteEndpointTable, implementors should be careful
+not to create entries that would result in OIDs with
+more than 128 sub-identifiers; this is because of SNMP
+and SMI limitations.""",
+        }, # column
+        "udpliteEndpointLocalPort" : {
+            "nodetype" : "column",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.1.8.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetPortNumber"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The local port number for this UDP-Lite endpoint.""",
+        }, # column
+        "udpliteEndpointRemoteAddressType" : {
+            "nodetype" : "column",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.1.8.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddressType"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The address type of udpliteEndpointRemoteAddress.  Only
+IPv4, IPv4z, IPv6, and IPv6z addresses are expected, or
+unknown(0) if datagrams for all remote IP addresses are
+accepted.  Also, note that some combinations of
+udpliteEndpointLocalAdressType and
+udpliteEndpointRemoteAddressType are not supported.  In
+particular, if the value of this object is not
+unknown(0), it is expected to always refer to the
+same IP version as udpliteEndpointLocalAddressType.""",
+        }, # column
+        "udpliteEndpointRemoteAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.1.8.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddress"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The remote IP address for this UDP-Lite endpoint.  If
+datagrams from any remote system are to be accepted,
+this value is ''h (a zero-length octet-string).
+Otherwise, it has the type described by
+udpliteEndpointRemoteAddressType and is the address of
+
+
+
+the remote system from which datagrams are to be
+accepted (or to which all datagrams will be sent).
+
+As this object is used in the index for the
+udpliteEndpointTable, implementors should be careful
+not to create entries that would result in OIDs with
+more than 128 sub-identifiers; this is because of SNMP
+and SMI limitations.""",
+        }, # column
+        "udpliteEndpointRemotePort" : {
+            "nodetype" : "column",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.1.8.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetPortNumber"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The remote port number for this UDP-Lite endpoint.  If
+datagrams from any remote system are to be accepted,
+this value is zero.""",
+        }, # column
+        "udpliteEndpointInstance" : {
+            "nodetype" : "column",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.1.8.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "4294967295"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "4294967295"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """The instance of this tuple.  This object is used to
+distinguish among multiple processes 'connected' to
+the same UDP-Lite endpoint.  For example, on a system
+implementing the BSD sockets interface, this would be
+used to support the SO_REUSEADDR and SO_REUSEPORT
+socket options.""",
+        }, # column
+        "udpliteEndpointProcess" : {
+            "nodetype" : "column",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.1.8.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A unique value corresponding to a piece of software
+running on this endpoint.
+
+If this endpoint is associated with more than one piece
+of software, the agent should choose one of these.  As
+long as the representative piece of software
+is running and still associated with the endpoint,
+subsequent reads will consistently return the same
+value.  The implementation may use any algorithm
+satisfying these constraints (e.g., choosing the entity
+
+
+
+with the oldest start time).
+
+This identifier is platform-specific.  Wherever possible,
+it should use the system's native, unique identification
+number as the value.
+
+If the SYSAPPL-MIB module is available, the value should
+be the same as sysApplElmtRunIndex.  If not available, an
+alternative should be used (e.g., the hrSWRunIndex of the
+HOST-RESOURCES-MIB module).
+
+If it is not possible to uniquely identify the pieces of
+software associated with this endpoint, then the value
+zero should be used.  (Note that zero is otherwise a
+valid value for sysApplElmtRunIndex.)""",
+        }, # column
+        "udpliteEndpointMinCoverage" : {
+            "nodetype" : "column",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.1.8.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The minimum checksum coverage expected by this endpoint.
+A value of 0 indicates that only fully covered datagrams
+are accepted.""",
+            "reference" :
+                """RFC 3828, section 3.1""",
+        }, # column
+        "udpliteEndpointViolCoverage" : {
+            "nodetype" : "column",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.1.8.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of datagrams received by this endpoint whose
+checksum coverage violated the minimum coverage threshold
+set for this connection (i.e., all valid datagrams whose
+checksum coverage was strictly smaller than the minimum,
+as defined in RFC 3828).
+Discontinuities in the value of this counter can occur
+at re-initialisation of the management system, and at
+other times as indicated by the value of
+udpliteStatsDiscontinuityTime.""",
+        }, # column
+        "udpliteStatsDiscontinuityTime" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime at the most recent occasion at
+which one or more of the UDP-Lite counters suffered a
+discontinuity.
+A value of zero indicates no such discontinuity has
+occurred since the last re-initialisation of the local
+management subsystem.""",
+        }, # scalar
+        "udpliteMIBConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.2",
+        }, # node
+        "udpliteMIBGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.2.2",
+        }, # node
+    }, # nodes
+
+    "groups" : {
+        "udpliteBaseGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.2.2.1",
+            "status" : "current",
+            "members" : {
+                "udpliteInDatagrams" : {
+                    "nodetype" : "member",
+                    "module" : "UDPLITE-MIB"
+                },
+                "udpliteNoPorts" : {
+                    "nodetype" : "member",
+                    "module" : "UDPLITE-MIB"
+                },
+                "udpliteInErrors" : {
+                    "nodetype" : "member",
+                    "module" : "UDPLITE-MIB"
+                },
+                "udpliteOutDatagrams" : {
+                    "nodetype" : "member",
+                    "module" : "UDPLITE-MIB"
+                },
+                "udpliteStatsDiscontinuityTime" : {
+                    "nodetype" : "member",
+                    "module" : "UDPLITE-MIB"
+                },
+            }, # members
+            "description" :
+                """The group of objects providing for counters of
+basic UDP-like statistics.""",
+        }, # group
+        "udplitePartialCsumGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.2.2.2",
+            "status" : "current",
+            "members" : {
+                "udpliteInPartialCov" : {
+                    "nodetype" : "member",
+                    "module" : "UDPLITE-MIB"
+                },
+                "udpliteInBadChecksum" : {
+                    "nodetype" : "member",
+                    "module" : "UDPLITE-MIB"
+                },
+                "udpliteOutPartialCov" : {
+                    "nodetype" : "member",
+                    "module" : "UDPLITE-MIB"
+                },
+            }, # members
+            "description" :
+                """The group of objects providing for counters of
+transport layer statistics exclusive to UDP-Lite.""",
+        }, # group
+        "udpliteEndpointGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.2.2.3",
+            "status" : "current",
+            "members" : {
+                "udpliteEndpointProcess" : {
+                    "nodetype" : "member",
+                    "module" : "UDPLITE-MIB"
+                },
+                "udpliteEndpointMinCoverage" : {
+                    "nodetype" : "member",
+                    "module" : "UDPLITE-MIB"
+                },
+            }, # members
+            "description" :
+                """The group of objects providing for the IP version
+independent management of UDP-Lite 'endpoints'.""",
+        }, # group
+        "udpliteAppGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.2.2.4",
+            "status" : "current",
+            "members" : {
+                "udpliteEndpointViolCoverage" : {
+                    "nodetype" : "member",
+                    "module" : "UDPLITE-MIB"
+                },
+            }, # members
+            "description" :
+                """The group of objects that provide application-level
+information for the configuration management of
+UDP-Lite 'endpoints'.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "udpliteMIBCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "UDPLITE-MIB",
+            "oid" : "1.3.6.1.2.1.170.2.1",
+            "status" : "current",
+            "description" :
+                """The compliance statement for systems that implement
+UDP-Lite.
+
+There are a number of INDEX objects that cannot be
+represented in the form of OBJECT clauses in SMIv2,
+but for which we have the following compliance
+requirements, expressed in OBJECT clause form in this
+description clause:
+
+-- OBJECT      udpliteEndpointLocalAddressType
+-- SYNTAX      InetAddressType { unknown(0), ipv4(1),
+--                               ipv6(2), ipv4z(3),
+--                               ipv6z(4) }
+-- DESCRIPTION
+--     Support for dns(16) is not required.
+-- OBJECT      udpliteEndpointLocalAddress
+-- SYNTAX      InetAddress (SIZE(0|4|8|16|20))
+-- DESCRIPTION
+--     Support is only required for zero-length
+--     octet-strings, and for scoped and unscoped
+--     IPv4 and IPv6 addresses.
+-- OBJECT      udpliteEndpointRemoteAddressType
+-- SYNTAX      InetAddressType { unknown(0), ipv4(1),
+--                               ipv6(2), ipv4z(3),
+--                               ipv6z(4) }
+-- DESCRIPTION
+--     Support for dns(16) is not required.
+-- OBJECT      udpliteEndpointRemoteAddress
+
+
+
+-- SYNTAX      InetAddress (SIZE(0|4|8|16|20))
+-- DESCRIPTION
+--     Support is only required for zero-length
+--     octet-strings, and for scoped and unscoped
+--     IPv4 and IPv6 addresses.""",
+            "requires" : {
+                "udpliteBaseGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UDPLITE-MIB"
+                },
+                "udplitePartialCsumGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UDPLITE-MIB"
+                },
+                "udpliteEndpointGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UDPLITE-MIB"
+                },
+                "udpliteAppGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "UDPLITE-MIB",
+                    "description" :
+                        """This group is optional and provides supplementary
+information about the effectiveness of using minimum
+checksum coverage thresholds on endpoints.""",
+                },
+            }, # requires
+        }, # compliance
+    }, # compliances
+
+}