logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/UDP-MIB.dic

@@ -0,0 +1,751 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python UDP-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/UDP-MIB"
+
+MIB = {
+    "moduleName" : "UDP-MIB",
+
+    "UDP-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF IPv6 Working Group
+http://www.ietf.org/html.charters/ipv6-charter.html""",
+        "contact" : 
+            """Bill Fenner (editor)
+
+AT&T Labs -- Research
+75 Willow Rd.
+Menlo Park, CA 94025
+
+Phone: +1 650 330-7893
+Email: <fenner@research.att.com>
+
+John Flick (editor)
+
+Hewlett-Packard Company
+8000 Foothills Blvd. M/S 5557
+Roseville, CA 95747
+
+Phone: +1 916 785 4018
+Email: <john.flick@hp.com>
+
+Send comments to <ipv6@ietf.org>""",
+        "description" :
+            """The MIB module for managing UDP implementations.
+Copyright (C) The Internet Society (2005).  This
+version of this MIB module is part of RFC 4113;
+see the RFC itself for full legal notices.""",
+        "revisions" : (
+            {
+                "date" : "2005-05-20 00:00",
+                "description" :
+                    """IP version neutral revision, incorporating the
+following revisions:
+
+- Added udpHCInDatagrams and udpHCOutDatagrams in order
+  to provide high-capacity counters for fast networks.
+- Added text to the descriptions of all counter objects
+  to indicate how discontinuities are detected.
+- Deprecated the IPv4-specific udpTable and replaced it
+  with the version neutral udpEndpointTable.  This
+  table includes support for connected UDP endpoints
+  and support for identification of the operating
+  system process associated with a UDP endpoint.
+- Deprecated the udpGroup and replaced it with object
+  groups representing the current set of objects.
+- Deprecated udpMIBCompliance and replaced it with
+  udpMIBCompliance2, which includes the compliance
+  information for the new object groups.
+
+This version published as RFC 4113.""",
+            },
+            {
+                "date" : "1994-11-01 00:00",
+                "description" :
+                    """Initial SMIv2 version, published as RFC 2013.""",
+            },
+            {
+                "date" : "1991-03-31 00:00",
+                "description" :
+                    """The initial revision of this MIB module was part of
+MIB-II, published as RFC 1213.""",
+            },
+        ),
+        "identity node" : "udpMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter32"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter64"},
+        {"module" : "SNMPv2-SMI", "name" : "Unsigned32"},
+        {"module" : "SNMPv2-SMI", "name" : "IpAddress"},
+        {"module" : "SNMPv2-SMI", "name" : "mib-2"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetAddress"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetAddressType"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetPortNumber"},
+    ),
+
+    "nodes" : {
+        "udp" : {
+            "nodetype" : "node",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.7",
+        }, # node
+        "udpInDatagrams" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.7.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The total number of UDP datagrams delivered to UDP
+users.
+
+
+
+
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by discontinuities in the
+value of sysUpTime.""",
+        }, # scalar
+        "udpNoPorts" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.7.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The total number of received UDP datagrams for which
+there was no application at the destination port.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by discontinuities in the
+value of sysUpTime.""",
+        }, # scalar
+        "udpInErrors" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.7.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of received UDP datagrams that could not be
+delivered for reasons other than the lack of an
+application at the destination port.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by discontinuities in the
+value of sysUpTime.""",
+        }, # scalar
+        "udpOutDatagrams" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.7.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The total number of UDP datagrams sent from this
+entity.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by discontinuities in the
+value of sysUpTime.""",
+        }, # scalar
+        "udpTable" : {
+            "nodetype" : "table",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.7.5",
+            "status" : "deprecated",
+            "description" :
+                """A table containing IPv4-specific UDP listener
+information.  It contains information about all local
+IPv4 UDP end-points on which an application is
+currently accepting datagrams.  This table has been
+deprecated in favor of the version neutral
+udpEndpointTable.""",
+        }, # table
+        "udpEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.7.5.1",
+            "status" : "deprecated",
+            "linkage" : [
+                "udpLocalAddress",
+                "udpLocalPort",
+            ],
+            "description" :
+                """Information about a particular current UDP listener.""",
+        }, # row
+        "udpLocalAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.7.5.1.1",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "IpAddress"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The local IP address for this UDP listener.  In the
+case of a UDP listener that is willing to accept
+datagrams for any IP interface associated with the
+node, the value 0.0.0.0 is used.""",
+        }, # column
+        "udpLocalPort" : {
+            "nodetype" : "column",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.7.5.1.2",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The local port number for this UDP listener.""",
+        }, # column
+        "udpEndpointTable" : {
+            "nodetype" : "table",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.7.7",
+            "status" : "current",
+            "description" :
+                """A table containing information about this entity's UDP
+endpoints on which a local application is currently
+accepting or sending datagrams.
+
+
+
+
+
+The address type in this table represents the address
+type used for the communication, irrespective of the
+higher-layer abstraction.  For example, an application
+using IPv6 'sockets' to communicate via IPv4 between
+::ffff:10.0.0.1 and ::ffff:10.0.0.2 would use
+InetAddressType ipv4(1).
+
+Unlike the udpTable in RFC 2013, this table also allows
+the representation of an application that completely
+specifies both local and remote addresses and ports.  A
+listening application is represented in three possible
+ways:
+
+1) An application that is willing to accept both IPv4
+   and IPv6 datagrams is represented by a
+   udpEndpointLocalAddressType of unknown(0) and a
+   udpEndpointLocalAddress of ''h (a zero-length
+   octet-string).
+
+2) An application that is willing to accept only IPv4
+   or only IPv6 datagrams is represented by a
+   udpEndpointLocalAddressType of the appropriate
+   address type and a udpEndpointLocalAddress of
+   '0.0.0.0' or '::' respectively.
+
+3) An application that is listening for datagrams only
+   for a specific IP address but from any remote
+   system is represented by a
+   udpEndpointLocalAddressType of the appropriate
+   address type, with udpEndpointLocalAddress
+   specifying the local address.
+
+In all cases where the remote is a wildcard, the
+udpEndpointRemoteAddressType is unknown(0), the
+udpEndpointRemoteAddress is ''h (a zero-length
+octet-string), and the udpEndpointRemotePort is 0.
+
+If the operating system is demultiplexing UDP packets
+by remote address and port, or if the application has
+'connected' the socket specifying a default remote
+address and port, the udpEndpointRemote* values should
+be used to reflect this.""",
+        }, # table
+        "udpEndpointEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.7.7.1",
+            "status" : "current",
+            "linkage" : [
+                "udpEndpointLocalAddressType",
+                "udpEndpointLocalAddress",
+                "udpEndpointLocalPort",
+                "udpEndpointRemoteAddressType",
+                "udpEndpointRemoteAddress",
+                "udpEndpointRemotePort",
+                "udpEndpointInstance",
+            ],
+            "description" :
+                """Information about a particular current UDP endpoint.
+
+Implementers need to be aware that if the total number
+of elements (octets or sub-identifiers) in
+udpEndpointLocalAddress and udpEndpointRemoteAddress
+exceeds 111, then OIDs of column instances in this table
+will have more than 128 sub-identifiers and cannot be
+accessed using SNMPv1, SNMPv2c, or SNMPv3.""",
+        }, # row
+        "udpEndpointLocalAddressType" : {
+            "nodetype" : "column",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.7.7.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddressType"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The address type of udpEndpointLocalAddress.  Only
+IPv4, IPv4z, IPv6, and IPv6z addresses are expected, or
+unknown(0) if datagrams for all local IP addresses are
+accepted.""",
+        }, # column
+        "udpEndpointLocalAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.7.7.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddress"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The local IP address for this UDP endpoint.
+
+The value of this object can be represented in three
+
+
+
+possible ways, depending on the characteristics of the
+listening application:
+
+1. For an application that is willing to accept both
+   IPv4 and IPv6 datagrams, the value of this object
+   must be ''h (a zero-length octet-string), with
+   the value of the corresponding instance of the
+   udpEndpointLocalAddressType object being unknown(0).
+
+2. For an application that is willing to accept only IPv4
+   or only IPv6 datagrams, the value of this object
+   must be '0.0.0.0' or '::', respectively, while the
+   corresponding instance of the
+   udpEndpointLocalAddressType object represents the
+   appropriate address type.
+
+3. For an application that is listening for data
+   destined only to a specific IP address, the value
+   of this object is the specific IP address for which
+   this node is receiving packets, with the
+   corresponding instance of the
+   udpEndpointLocalAddressType object representing the
+   appropriate address type.
+
+As this object is used in the index for the
+udpEndpointTable, implementors of this table should be
+careful not to create entries that would result in OIDs
+with more than 128 subidentifiers; else the information
+cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.""",
+        }, # column
+        "udpEndpointLocalPort" : {
+            "nodetype" : "column",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.7.7.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetPortNumber"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The local port number for this UDP endpoint.""",
+        }, # column
+        "udpEndpointRemoteAddressType" : {
+            "nodetype" : "column",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.7.7.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddressType"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The address type of udpEndpointRemoteAddress.  Only
+IPv4, IPv4z, IPv6, and IPv6z addresses are expected, or
+unknown(0) if datagrams for all remote IP addresses are
+accepted.  Also, note that some combinations of
+
+
+
+udpEndpointLocalAdressType and
+udpEndpointRemoteAddressType are not supported.  In
+particular, if the value of this object is not
+unknown(0), it is expected to always refer to the
+same IP version as udpEndpointLocalAddressType.""",
+        }, # column
+        "udpEndpointRemoteAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.7.7.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddress"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The remote IP address for this UDP endpoint.  If
+datagrams from any remote system are to be accepted,
+this value is ''h (a zero-length octet-string).
+Otherwise, it has the type described by
+udpEndpointRemoteAddressType and is the address of the
+remote system from which datagrams are to be accepted
+(or to which all datagrams will be sent).
+
+As this object is used in the index for the
+udpEndpointTable, implementors of this table should be
+careful not to create entries that would result in OIDs
+with more than 128 subidentifiers; else the information
+cannot be accessed using SNMPv1, SNMPv2c, or SNMPv3.""",
+        }, # column
+        "udpEndpointRemotePort" : {
+            "nodetype" : "column",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.7.7.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetPortNumber"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The remote port number for this UDP endpoint.  If
+datagrams from any remote system are to be accepted,
+this value is zero.""",
+        }, # column
+        "udpEndpointInstance" : {
+            "nodetype" : "column",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.7.7.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "4294967295"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "4294967295"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """The instance of this tuple.  This object is used to
+distinguish among multiple processes 'connected' to
+the same UDP endpoint.  For example, on a system
+implementing the BSD sockets interface, this would be
+used to support the SO_REUSEADDR and SO_REUSEPORT
+socket options.""",
+        }, # column
+        "udpEndpointProcess" : {
+            "nodetype" : "column",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.7.7.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The system's process ID for the process associated with
+this endpoint, or zero if there is no such process.
+This value is expected to be the same as
+HOST-RESOURCES-MIB::hrSWRunIndex or SYSAPPL-MIB::
+sysApplElmtRunIndex for some row in the appropriate
+tables.""",
+        }, # column
+        "udpHCInDatagrams" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.7.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The total number of UDP datagrams delivered to UDP
+users, for devices that can receive more than 1
+million UDP datagrams per second.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by discontinuities in the
+value of sysUpTime.""",
+        }, # scalar
+        "udpHCOutDatagrams" : {
+            "nodetype" : "scalar",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.7.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The total number of UDP datagrams sent from this
+entity, for devices that can transmit more than 1
+million UDP datagrams per second.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by discontinuities in the
+value of sysUpTime.""",
+        }, # scalar
+        "udpMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.50",
+            "status" : "current",
+        }, # node
+        "udpMIBConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.50.2",
+        }, # node
+        "udpMIBCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.50.2.1",
+        }, # node
+        "udpMIBGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.50.2.2",
+        }, # node
+    }, # nodes
+
+    "groups" : {
+        "udpGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.50.2.2.1",
+            "status" : "deprecated",
+            "members" : {
+                "udpInDatagrams" : {
+                    "nodetype" : "member",
+                    "module" : "UDP-MIB"
+                },
+                "udpNoPorts" : {
+                    "nodetype" : "member",
+                    "module" : "UDP-MIB"
+                },
+                "udpInErrors" : {
+                    "nodetype" : "member",
+                    "module" : "UDP-MIB"
+                },
+                "udpOutDatagrams" : {
+                    "nodetype" : "member",
+                    "module" : "UDP-MIB"
+                },
+                "udpLocalAddress" : {
+                    "nodetype" : "member",
+                    "module" : "UDP-MIB"
+                },
+                "udpLocalPort" : {
+                    "nodetype" : "member",
+                    "module" : "UDP-MIB"
+                },
+            }, # members
+            "description" :
+                """The deprecated group of objects providing for
+management of UDP over IPv4.""",
+        }, # group
+        "udpBaseGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.50.2.2.2",
+            "status" : "current",
+            "members" : {
+                "udpInDatagrams" : {
+                    "nodetype" : "member",
+                    "module" : "UDP-MIB"
+                },
+                "udpNoPorts" : {
+                    "nodetype" : "member",
+                    "module" : "UDP-MIB"
+                },
+                "udpInErrors" : {
+                    "nodetype" : "member",
+                    "module" : "UDP-MIB"
+                },
+                "udpOutDatagrams" : {
+                    "nodetype" : "member",
+                    "module" : "UDP-MIB"
+                },
+            }, # members
+            "description" :
+                """The group of objects providing for counters of UDP
+statistics.""",
+        }, # group
+        "udpHCGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.50.2.2.3",
+            "status" : "current",
+            "members" : {
+                "udpHCInDatagrams" : {
+                    "nodetype" : "member",
+                    "module" : "UDP-MIB"
+                },
+                "udpHCOutDatagrams" : {
+                    "nodetype" : "member",
+                    "module" : "UDP-MIB"
+                },
+            }, # members
+            "description" :
+                """The group of objects providing for counters of high
+speed UDP implementations.""",
+        }, # group
+        "udpEndpointGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.50.2.2.4",
+            "status" : "current",
+            "members" : {
+                "udpEndpointProcess" : {
+                    "nodetype" : "member",
+                    "module" : "UDP-MIB"
+                },
+            }, # members
+            "description" :
+                """The group of objects providing for the IP version
+independent management of UDP 'endpoints'.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "udpMIBCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.50.2.1.1",
+            "status" : "deprecated",
+            "description" :
+                """The compliance statement for IPv4-only systems that
+implement UDP.  For IP version independence, this
+compliance statement is deprecated in favor of
+udpMIBCompliance2.  However, agents are still
+encouraged to implement these objects in order to
+interoperate with the deployed base of managers.""",
+            "requires" : {
+                "udpGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UDP-MIB"
+                },
+            }, # requires
+        }, # compliance
+        "udpMIBCompliance2" : {
+            "nodetype" : "compliance",
+            "moduleName" : "UDP-MIB",
+            "oid" : "1.3.6.1.2.1.50.2.1.2",
+            "status" : "current",
+            "description" :
+                """The compliance statement for systems that implement
+UDP.
+
+There are a number of INDEX objects that cannot be
+represented in the form of OBJECT clauses in SMIv2, but
+for which we have the following compliance
+requirements, expressed in OBJECT clause form in this
+description clause:
+
+-- OBJECT      udpEndpointLocalAddressType
+-- SYNTAX      InetAddressType { unknown(0), ipv4(1),
+--                               ipv6(2), ipv4z(3),
+--                               ipv6z(4) }
+-- DESCRIPTION
+--     Support for dns(5) is not required.
+-- OBJECT      udpEndpointLocalAddress
+
+
+
+-- SYNTAX      InetAddress (SIZE(0|4|8|16|20))
+-- DESCRIPTION
+--     Support is only required for zero-length
+--     octet-strings, and for scoped and unscoped
+--     IPv4 and IPv6 addresses.
+-- OBJECT      udpEndpointRemoteAddressType
+-- SYNTAX      InetAddressType { unknown(0), ipv4(1),
+--                               ipv6(2), ipv4z(3),
+--                               ipv6z(4) }
+-- DESCRIPTION
+--     Support for dns(5) is not required.
+-- OBJECT      udpEndpointRemoteAddress
+-- SYNTAX      InetAddress (SIZE(0|4|8|16|20))
+-- DESCRIPTION
+--     Support is only required for zero-length
+--     octet-strings, and for scoped and unscoped
+--     IPv4 and IPv6 addresses.""",
+            "requires" : {
+                "udpBaseGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UDP-MIB"
+                },
+                "udpEndpointGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "UDP-MIB"
+                },
+                "udpHCGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "UDP-MIB",
+                    "description" :
+                        """This group is mandatory for systems that
+are capable of receiving or transmitting more than
+1 million UDP datagrams per second.  1 million
+datagrams per second will cause a Counter32 to
+wrap in just over an hour.""",
+                },
+            }, # requires
+        }, # compliance
+    }, # compliances
+
+}