logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/TOKENRING-MIB.dic

@@ -0,0 +1,1184 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python TOKENRING-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/TOKENRING-MIB"
+
+MIB = {
+    "moduleName" : "TOKENRING-MIB",
+
+    "TOKENRING-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF Interfaces MIB Working Group""",
+        "contact" : 
+            """        Keith McCloghrie
+
+Postal: cisco Systems, Inc.
+        170 West Tasman Drive,
+        San Jose, CA 95134-1706
+        US
+
+ Phone: +1 408 526 5260
+ EMail: kzm@cisco.com""",
+        "description" :
+            """The MIB module for IEEE Token Ring entities.""",
+        "revisions" : (
+            {
+                "date" : "1994-10-23 11:50",
+                "description" :
+                    """[Revision added by libsmi due to a LAST-UPDATED clause.]""",
+            },
+        ),
+        "identity node" : "dot5",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter32"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "RFC1213-MIB", "name" : "transmission"},
+        {"module" : "SNMPv2-TC", "name" : "MacAddress"},
+        {"module" : "SNMPv2-TC", "name" : "TimeStamp"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+    ),
+
+    "nodes" : {
+        "dot5" : {
+            "nodetype" : "node",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9",
+            "status" : "current",
+        }, # node
+        "dot5Table" : {
+            "nodetype" : "table",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.1",
+            "status" : "current",
+            "description" :
+                """This table contains Token Ring interface
+parameters and state variables, one entry
+per 802.5 interface.""",
+        }, # table
+        "dot5Entry" : {
+            "nodetype" : "row",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.1.1",
+            "status" : "current",
+            "linkage" : [
+                "dot5IfIndex",
+            ],
+            "description" :
+                """A list of Token Ring status and parameter
+values for an 802.5 interface.""",
+        }, # row
+        "dot5IfIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of this object identifies the
+802.5 interface for which this entry
+contains management information.  The
+value of this object for a particular
+interface has the same value as the
+ifIndex object, defined in MIB-II for
+the same interface.""",
+        }, # column
+        "dot5Commands" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "noop" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "open" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "reset" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "close" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """When this object is set to the value of
+open(2), the station should go into the
+open state.  The progress and success of
+the open is given by the values of the
+objects dot5RingState and
+dot5RingOpenStatus.
+    When this object is set to the value
+of reset(3), then the station should do
+a reset.  On a reset, all MIB counters
+should retain their values, if possible.
+Other side affects are dependent on the
+hardware chip set.
+    When this object is set to the value
+of close(4), the station should go into
+the stopped state by removing itself
+from the ring.
+    Setting this object to a value of
+noop(1) has no effect.
+    When read, this object always has a
+value of noop(1).
+    The open(2) and close(4) values
+correspond to the up(1) and down(2) values
+of MIB-II's ifAdminStatus and ifOperStatus,
+i.e., the setting of ifAdminStatus and
+dot5Commands affects the values of both
+dot5Commands and ifOperStatus.""",
+        }, # column
+        "dot5RingStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "262143"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "262143"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The current interface status which can
+be used to diagnose fluctuating problems
+that can occur on token rings, after a
+station has successfully been added to
+the ring.
+   Before an open is completed, this
+object has the value for the 'no status'
+condition.  The dot5RingState and
+dot5RingOpenStatus objects provide for
+debugging problems when the station
+can not even enter the ring.
+    The object's value is a sum of
+values, one for each currently applicable
+condition.  The following values are
+defined for various conditions:
+
+        0 = No Problems detected
+       32 = Ring Recovery
+       64 = Single Station
+      256 = Remove Received
+      512 = reserved
+     1024 = Auto-Removal Error
+     2048 = Lobe Wire Fault
+     4096 = Transmit Beacon
+     8192 = Soft Error
+    16384 = Hard Error
+    32768 = Signal Loss
+   131072 = no status, open not completed.""",
+        }, # column
+        "dot5RingState" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "opened" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "closed" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "opening" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "closing" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "openFailure" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "ringFailure" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The current interface state with respect
+to entering or leaving the ring.""",
+        }, # column
+        "dot5RingOpenStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "noOpen" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "badParam" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "lobeFailed" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "signalLoss" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "insertionTimeout" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "ringFailed" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "beaconing" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                    "duplicateMAC" : {
+                        "nodetype" : "namednumber",
+                        "number" : "8"
+                    },
+                    "requestFailed" : {
+                        "nodetype" : "namednumber",
+                        "number" : "9"
+                    },
+                    "removeReceived" : {
+                        "nodetype" : "namednumber",
+                        "number" : "10"
+                    },
+                    "open" : {
+                        "nodetype" : "namednumber",
+                        "number" : "11"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object indicates the success, or the
+reason for failure, of the station's most
+recent attempt to enter the ring.""",
+        }, # column
+        "dot5RingSpeed" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "unknown" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "oneMegabit" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "fourMegabit" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "sixteenMegabit" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The ring-speed at the next insertion into
+the ring.  Note that this may or may not be
+different to the current ring-speed which is
+given by MIB-II's ifSpeed.  For interfaces
+which do not support changing ring-speed,
+dot5RingSpeed can only be set to its current
+value.  When dot5RingSpeed has the value
+unknown(1), the ring's actual ring-speed is
+to be used.""",
+        }, # column
+        "dot5UpStream" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "MacAddress"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The MAC-address of the up stream neighbor
+station in the ring.""",
+        }, # column
+        "dot5ActMonParticipate" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "true" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "false" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """If this object has a value of true(1) then
+this interface will participate in the
+active monitor selection process.  If the
+value is false(2) then it will not.
+Setting this object does not take effect
+until the next Active Monitor election, and
+might not take effect until the next time
+the interface is opened.""",
+        }, # column
+        "dot5Functional" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.1.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "MacAddress"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The bit mask of all Token Ring functional
+addresses for which this interface will
+accept frames.""",
+        }, # column
+        "dot5LastBeaconSent" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.1.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of MIB-II's sysUpTime object at which
+the local system last transmitted a Beacon frame
+on this interface.""",
+        }, # column
+        "dot5StatsTable" : {
+            "nodetype" : "table",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.2",
+            "status" : "current",
+            "description" :
+                """A table containing Token Ring statistics,
+one entry per 802.5 interface.
+    All the statistics are defined using
+the syntax Counter32 as 32-bit wrap around
+counters.  Thus, if an interface's
+hardware maintains these statistics in
+16-bit counters, then the agent must read
+the hardware's counters frequently enough
+to prevent loss of significance, in order
+to maintain 32-bit counters in software.""",
+        }, # table
+        "dot5StatsEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.2.1",
+            "status" : "current",
+            "linkage" : [
+                "dot5StatsIfIndex",
+            ],
+            "description" :
+                """An entry contains the 802.5 statistics
+for a particular interface.""",
+        }, # row
+        "dot5StatsIfIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of this object identifies the
+802.5 interface for which this entry
+contains management information.  The
+value of this object for a particular
+interface has the same value as MIB-II's
+ifIndex object for the same interface.""",
+        }, # column
+        "dot5StatsLineErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented when a frame
+or token is copied or repeated by a
+station, the E bit is zero in the frame
+or token and one of the following
+conditions exists: 1) there is a
+non-data bit (J or K bit) between the SD
+and the ED of the frame or token, or
+2) there is an FCS error in the frame.""",
+        }, # column
+        "dot5StatsBurstErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented when a station
+detects the absence of transitions for five
+half-bit timers (burst-five error).""",
+        }, # column
+        "dot5StatsACErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented when a station
+receives an AMP or SMP frame in which A is
+equal to C is equal to 0, and then receives
+another SMP frame with A is equal to C is
+equal to 0 without first receiving an AMP
+frame. It denotes a station that cannot set
+the AC bits properly.""",
+        }, # column
+        "dot5StatsAbortTransErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented when a station
+transmits an abort delimiter while
+transmitting.""",
+        }, # column
+        "dot5StatsInternalErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.2.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented when a station
+recognizes an internal error.""",
+        }, # column
+        "dot5StatsLostFrameErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.2.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented when a station
+is transmitting and its TRR timer expires.
+This condition denotes a condition where a
+transmitting station in strip mode does not
+receive the trailer of the frame before the
+TRR timer goes off.""",
+        }, # column
+        "dot5StatsReceiveCongestions" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.2.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented when a station
+recognizes a frame addressed to its
+specific address, but has no available
+buffer space indicating that the station
+is congested.""",
+        }, # column
+        "dot5StatsFrameCopiedErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.2.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented when a station
+recognizes a frame addressed to its
+specific address and detects that the FS
+field A bits are set to 1 indicating a
+possible line hit or duplicate address.""",
+        }, # column
+        "dot5StatsTokenErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.2.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented when a station
+acting as the active monitor recognizes an
+error condition that needs a token
+transmitted.""",
+        }, # column
+        "dot5StatsSoftErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.2.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of Soft Errors the interface
+has detected. It directly corresponds to
+the number of Report Error MAC frames
+that this interface has transmitted.
+Soft Errors are those which are
+recoverable by the MAC layer protocols.""",
+        }, # column
+        "dot5StatsHardErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.2.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times this interface has
+detected an immediately recoverable
+fatal error.  It denotes the number of
+times this interface is either
+transmitting or receiving beacon MAC
+frames.""",
+        }, # column
+        "dot5StatsSignalLoss" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.2.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times this interface has
+detected the loss of signal condition from
+the ring.""",
+        }, # column
+        "dot5StatsTransmitBeacons" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.2.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times this interface has
+transmitted a beacon frame.""",
+        }, # column
+        "dot5StatsRecoverys" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.2.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of Claim Token MAC frames
+received or transmitted after the interface
+has received a Ring Purge MAC frame.  This
+counter signifies the number of times the
+ring has been purged and is being recovered
+back into a normal operating state.""",
+        }, # column
+        "dot5StatsLobeWires" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.2.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times the interface has
+detected an open or short circuit in the
+lobe data path.  The adapter will be closed
+and dot5RingState will signify this
+condition.""",
+        }, # column
+        "dot5StatsRemoves" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.2.1.17",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times the interface has
+received a Remove Ring Station MAC frame
+request.  When this frame is received
+the interface will enter the close state
+and dot5RingState will signify this
+condition.""",
+        }, # column
+        "dot5StatsSingles" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.2.1.18",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times the interface has
+sensed that it is the only station on the
+ring.  This will happen if the interface
+is the first one up on a ring, or if
+there is a hardware problem.""",
+        }, # column
+        "dot5StatsFreqErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.2.1.19",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times the interface has
+detected that the frequency of the
+incoming signal differs from the expected
+frequency by more than that specified by
+the IEEE 802.5 standard.""",
+        }, # column
+        "dot5Tests" : {
+            "nodetype" : "node",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.3",
+        }, # node
+        "dot5TestInsertFunc" : {
+            "nodetype" : "node",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.3.1",
+            "status" : "current",
+            "description" :
+                """Invoking this test causes the station to test the insert
+ring logic of the hardware if the station's lobe media
+cable is connected to a wiring concentrator.  Note that
+this command inserts the station into the network, and
+thus, could cause problems if the station is connected
+to a operational network.""",
+        }, # node
+        "dot5TestFullDuplexLoopBack" : {
+            "nodetype" : "node",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.3.2",
+            "status" : "current",
+            "description" :
+                """Invoking this test on a 802.5 interface causes the
+interface to check the path from memory through the
+chip set's internal logic and back to memory, thus
+checking the proper functioning of the system's
+interface to the chip set.""",
+        }, # node
+        "dot5ChipSets" : {
+            "nodetype" : "node",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.4",
+        }, # node
+        "dot5ChipSetIBM16" : {
+            "nodetype" : "node",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.4.1",
+            "status" : "current",
+            "description" :
+                """IBM's 16/4 Mbs chip set.""",
+        }, # node
+        "dot5ChipSetTItms380" : {
+            "nodetype" : "node",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.4.2",
+            "status" : "current",
+            "description" :
+                """Texas Instruments' TMS 380 4Mbs chip-set""",
+        }, # node
+        "dot5ChipSetTItms380c16" : {
+            "nodetype" : "node",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.4.3",
+            "status" : "current",
+            "description" :
+                """Texas Instruments' TMS 380C16 16/4 Mbs chip-set""",
+        }, # node
+        "dot5TimerTable" : {
+            "nodetype" : "table",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.5",
+            "status" : "obsolete",
+            "description" :
+                """This table contains Token Ring interface
+timer values, one entry per 802.5
+interface.""",
+        }, # table
+        "dot5TimerEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.5.1",
+            "status" : "obsolete",
+            "linkage" : [
+                "dot5TimerIfIndex",
+            ],
+            "description" :
+                """A list of Token Ring timer values for an
+802.5 interface.""",
+        }, # row
+        "dot5TimerIfIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.5.1.1",
+            "status" : "obsolete",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of this object identifies the
+802.5 interface for which this entry
+contains timer values.  The value of
+this object for a particular interface
+has the same value as MIB-II's ifIndex
+object for the same interface.""",
+        }, # column
+        "dot5TimerReturnRepeat" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.5.1.2",
+            "status" : "obsolete",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The time-out value used to ensure the
+interface will return to Repeat State, in
+units of 100 micro-seconds.  The value
+should be greater than the maximum ring
+latency.""",
+        }, # column
+        "dot5TimerHolding" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.5.1.3",
+            "status" : "obsolete",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Maximum period of time a station is
+permitted to transmit frames after capturing
+a token, in units of 100 micro-seconds.""",
+        }, # column
+        "dot5TimerQueuePDU" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.5.1.4",
+            "status" : "obsolete",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The time-out value for enqueuing of an SMP
+PDU after reception of an AMP or SMP
+frame in which the A and C bits were
+equal to 0, in units of 100
+micro-seconds.""",
+        }, # column
+        "dot5TimerValidTransmit" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.5.1.5",
+            "status" : "obsolete",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The time-out value used by the active
+monitor to detect the absence of valid
+transmissions, in units of 100
+micro-seconds.""",
+        }, # column
+        "dot5TimerNoToken" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.5.1.6",
+            "status" : "obsolete",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The time-out value used to recover from
+various-related error situations.
+If N is the maximum number of stations on
+the ring, the value of this timer is
+normally:
+dot5TimerReturnRepeat + N*dot5TimerHolding.""",
+        }, # column
+        "dot5TimerActiveMon" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.5.1.7",
+            "status" : "obsolete",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The time-out value used by the active
+monitor to stimulate the enqueuing of an
+AMP PDU for transmission, in units of
+100 micro-seconds.""",
+        }, # column
+        "dot5TimerStandbyMon" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.5.1.8",
+            "status" : "obsolete",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The time-out value used by the stand-by
+monitors to ensure that there is an active
+monitor on the ring and to detect a
+continuous stream of tokens, in units of
+100 micro-seconds.""",
+        }, # column
+        "dot5TimerErrorReport" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.5.1.9",
+            "status" : "obsolete",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The time-out value which determines how
+often a station shall send a Report Error
+MAC frame to report its error counters,
+in units of 100 micro-seconds.""",
+        }, # column
+        "dot5TimerBeaconTransmit" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.5.1.10",
+            "status" : "obsolete",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The time-out value which determines how
+long a station shall remain in the state
+of transmitting Beacon frames before
+entering the Bypass state, in units of
+100 micro-seconds.""",
+        }, # column
+        "dot5TimerBeaconReceive" : {
+            "nodetype" : "column",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.5.1.11",
+            "status" : "obsolete",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The time-out value which determines how
+long a station shall receive Beacon
+frames from its downstream neighbor
+before entering the Bypass state, in
+units of 100 micro-seconds.""",
+        }, # column
+        "dot5Conformance" : {
+            "nodetype" : "node",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.6",
+        }, # node
+        "dot5Groups" : {
+            "nodetype" : "node",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.6.1",
+        }, # node
+        "dot5Compliances" : {
+            "nodetype" : "node",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.6.2",
+        }, # node
+    }, # nodes
+
+    "groups" : {
+        "dot5StateGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.6.1.1",
+            "status" : "current",
+            "members" : {
+                "dot5Commands" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5RingStatus" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5RingState" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5RingOpenStatus" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5RingSpeed" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5UpStream" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5ActMonParticipate" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5Functional" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5LastBeaconSent" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing state information
+and parameters for IEEE 802.5 interfaces.""",
+        }, # group
+        "dot5StatsGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.6.1.2",
+            "status" : "current",
+            "members" : {
+                "dot5StatsLineErrors" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5StatsBurstErrors" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5StatsACErrors" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5StatsAbortTransErrors" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5StatsInternalErrors" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5StatsLostFrameErrors" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5StatsReceiveCongestions" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5StatsFrameCopiedErrors" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5StatsTokenErrors" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5StatsSoftErrors" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5StatsHardErrors" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5StatsSignalLoss" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5StatsTransmitBeacons" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5StatsRecoverys" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5StatsLobeWires" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5StatsRemoves" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5StatsSingles" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5StatsFreqErrors" : {
+                    "nodetype" : "member",
+                    "module" : "TOKENRING-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing statistics for
+IEEE 802.5 interfaces.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "dot5Compliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "TOKENRING-MIB",
+            "oid" : "1.3.6.1.2.1.10.9.6.2.1",
+            "status" : "current",
+            "description" :
+                """The compliance statement for SNMPv2 entities
+which implement the IEEE 802.5 MIB.""",
+            "requires" : {
+                "dot5StateGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "TOKENRING-MIB"
+                },
+                "dot5StatsGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "TOKENRING-MIB"
+                },
+            }, # requires
+            "refinements" : {
+                "dot5ActMonParticipate" : {
+                    "module" : "TOKENRING-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "dot5Functional" : {
+                    "module" : "TOKENRING-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+            }, # refinements
+
+        }, # compliance
+    }, # compliances
+
+}