logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/TE-LINK-STD-MIB.dic

@@ -0,0 +1,2876 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python TE-LINK-STD-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/TE-LINK-STD-MIB"
+
+MIB = {
+    "moduleName" : "TE-LINK-STD-MIB",
+
+    "TE-LINK-STD-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """Multiprotocol Label Switching (MPLS) Working Group""",
+        "contact" : 
+            """        Martin Dubuc
+Email:  mdubuc@ncf.ca
+
+        Thomas D. Nadeau
+Email:  tnadeau@cisco.com
+
+
+
+
+        Jonathan P. Lang
+Email:  jplang@ieee.org
+
+Comments about this document should be emailed directly to
+the MPLS working group mailing list at mpls@uu.net.""",
+        "description" :
+            """Copyright (C) 2005 The Internet Society.  This version of
+this MIB module is part of RFC 4220; see the RFC
+itself for full legal notices.
+
+This MIB module contains managed object definitions for
+MPLS traffic engineering links as defined in
+'Link Bundling in MPLS Traffic Engineering (TE)'.""",
+        "revisions" : (
+            {
+                "date" : "2005-10-11 00:00",
+                "description" :
+                    """Initial version published as RFC 4220.""",
+            },
+        ),
+        "identity node" : "teLinkStdMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "transmission"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "SNMPv2-SMI", "name" : "Unsigned32"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "SNMPv2-TC", "name" : "TEXTUAL-CONVENTION"},
+        {"module" : "SNMPv2-TC", "name" : "RowStatus"},
+        {"module" : "SNMPv2-TC", "name" : "StorageType"},
+        {"module" : "IF-MIB", "name" : "InterfaceIndexOrZero"},
+        {"module" : "IF-MIB", "name" : "ifIndex"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetAddressType"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetAddress"},
+    ),
+
+    "typedefs" : {
+        "TeLinkBandwidth" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "4",
+                "max" : "4"
+            },
+            ],
+            "range" : {
+                "min" : "4",
+                "max" : "4"
+            },
+            "description" :
+                """This type is used to represent link bandwidth in bps.  This
+value is represented using a 4 octet IEEE floating point
+format [IEEE].  The floating point representation is not
+used to represent fractional value but rather to allow
+specification of large numbers that cannot be expressed
+with 32-bit integers.""",
+            "reference" :
+                """IEEE Standard for Binary Floating-Point Arithmetic,
+Standard 754-1985""",
+        },
+        "TeLinkPriority" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "7"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "7"
+            },
+            "format" : "d",
+            "description" :
+                """This type is used to represent a priority.  Each connection
+is assigned a priority.  This priority is used when
+accounting for bandwidth on TE links or component
+links, for resource allocation and for rerouting purposes.
+Value 0 is the highest priority.  Value 7 is the lowest
+priority.""",
+        },
+        "TeLinkProtection" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "primary" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "secondary" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "description" :
+                """Link protection.""",
+        },
+        "TeLinkSwitchingCapability" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "packetSwitch1" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "packetSwitch2" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "packetSwitch3" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "packetSwitch4" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "layer2Switch" : {
+                "nodetype" : "namednumber",
+                "number" : "51"
+            },
+            "tdm" : {
+                "nodetype" : "namednumber",
+                "number" : "100"
+            },
+            "lambdaSwitch" : {
+                "nodetype" : "namednumber",
+                "number" : "150"
+            },
+            "fiberSwitch" : {
+                "nodetype" : "namednumber",
+                "number" : "200"
+            },
+            "description" :
+                """Switching capability as specified in the 'OSPF Extensions in
+Support of Generalized Multi-Protocol Label Switching
+(GMPLS)' document.  The values specified in this document
+are not contiguous.""",
+        },
+        "TeLinkEncodingType" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "packet" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "ethernet" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "ansiEtsiPdh" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "sdhItuSonetAnsi" : {
+                "nodetype" : "namednumber",
+                "number" : "5"
+            },
+            "digitalWrapper" : {
+                "nodetype" : "namednumber",
+                "number" : "7"
+            },
+            "lambda" : {
+                "nodetype" : "namednumber",
+                "number" : "8"
+            },
+            "fiber" : {
+                "nodetype" : "namednumber",
+                "number" : "9"
+            },
+            "fiberChannel" : {
+                "nodetype" : "namednumber",
+                "number" : "11"
+            },
+            "description" :
+                """Link encoding type as specified in 'Generalized
+Multi-Protocol Label Switching (GMPLS) Signaling
+Functional Description' document.  The values
+specified in this document are not contiguous.""",
+        },
+        "TeLinkSonetSdhIndication" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "standard" : {
+                "nodetype" : "namednumber",
+                "number" : "0"
+            },
+            "arbitrary" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "description" :
+                """This convention is used to indicate whether the interface
+supports Standard or Arbitrary SONET/SDH.  To simplify the
+mapping process, the values used in this textual convention
+match the values specified in the interface switching
+capability specific information field, i.e., 0 for Standard
+SONET/SDH and 1 for Arbitrary SONET/SDH.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        },
+    }, # typedefs
+
+    "nodes" : {
+        "teLinkStdMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200",
+            "status" : "current",
+        }, # node
+        "teLinkNotifications" : {
+            "nodetype" : "node",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.0",
+        }, # node
+        "teLinkObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1",
+        }, # node
+        "teLinkTable" : {
+            "nodetype" : "table",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.1",
+            "status" : "current",
+            "description" :
+                """This table specifies the grouping of component links into
+TE links and the grouping of TE links into bundled links.""",
+        }, # table
+        "teLinkEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.1.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+            ],
+            "description" :
+                """An entry in this table exists for each ifEntry with an
+ifType of teLink(200), i.e., for every TE link.  An ifEntry
+in the ifTable must exist before a teLinkEntry is created
+with the corresponding ifIndex.  If a TE link entry in the
+ifTable is destroyed, then so is the corresponding entry
+in the teLinkTable.  The administrative and operational
+status values are controlled from the ifEntry.""",
+        }, # row
+        "teLinkAddressType" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddressType"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The type of Internet address for the TE link.""",
+        }, # column
+        "teLinkLocalIpAddr" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddress"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The local Internet address for numbered links.  The type of
+this address is determined by the value of the
+teLinkAddressType object.
+
+For IPv4 and IPv6 numbered links, this object represents the
+local IP address associated with the TE link.  For an
+unnumbered link, the local address is of type unknown, this
+object is set to the zero length string, and the
+teLinkOutgoingIfId object then identifies the unnumbered
+address.
+
+If the TE link is a Forwarding Adjacency (FA), the local
+IP address is set to the head-end address of the FA-LSP.
+
+If ipAddrTable is implemented, this object must have the
+same value as the ipAdEntAddr object that belongs to the
+row in ipAddrTable where ipAdEntIfIndex is equal to
+
+
+
+ifIndex.""",
+        }, # column
+        "teLinkRemoteIpAddr" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddress"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The remote Internet address for numbered links.  The type of
+this address is determined by the value of the
+teLinkAddressType object.
+
+The remote IP address associated with the TE link (IPv4 and
+IPv6 numbered links).  For an unnumbered link, the remote
+address is of type unknown, this object is set to the
+zero length string, and the teLinkIncomingIfId object then
+identifies the unnumbered address.
+
+If the TE link is a Forwarding Adjacency, the remote IP
+address is set to the tail-end address of the FA-LSP.""",
+        }, # column
+        "teLinkMetric" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The traffic engineering metric for the TE link is
+derived from its component links.  All component links
+within the TE link must have the same traffic
+engineering metric.""",
+            "reference" :
+                """Link Bundling in MPLS Traffic Engineering (TE), RFC 4201""",
+        }, # column
+        "teLinkMaximumReservableBandwidth" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkBandwidth"},
+            },
+            "access" : "readonly",
+            "units" : "bps",
+            "description" :
+                """This attribute specifies the maximum reservable bandwidth on
+the TE link.  This is the union of the maximum reservable
+bandwidth of all the component links within the
+TE link that can be used to carry live traffic.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "teLinkProtectionType" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "extraTraffic" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "unprotected" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "shared" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "dedicated1For1" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "dedicated1Plus1" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "enhanced" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This attribute specifies the link protection type of the
+TE link.  Descriptions of the different protection types can
+be found in the 'Routing Extensions in Support of
+Generalized Multi-Protocol Label Switching (GMPLS)'
+document.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203 and
+Routing Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4202""",
+        }, # column
+        "teLinkWorkingPriority" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkPriority"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object represents a priority value such that a new
+connection with a higher priority, i.e., numerically lower
+than this value, is guaranteed to be setup on a primary
+link and not on a secondary link.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "teLinkResourceClass" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This attribute specifies the TE link resource class.
+The resource class is a 32 bit bitfield.  The resource class
+for a link bundle is derived from the resource class of its
+
+
+
+TE links.  All TE links within a link bundle must have the
+same resource class.  Encoding of the resource class is
+described in the 'Traffic Engineering (TE) Extensions to
+OSPF Version 2' document.""",
+            "reference" :
+                """Link Bundling in MPLS Traffic Engineering (TE), RFC 4201
+and Traffic Engineering (TE) Extensions to OSPF Version 2,
+RFC 3630""",
+        }, # column
+        "teLinkIncomingIfId" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.1.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """For unnumbered links, the incoming interface is set to the
+outgoing interface identifier chosen by the neighboring LSR
+for the reverse link corresponding to this TE link.  If the
+link is numbered, the value of this object is 0 and the
+address is stored in the teLinkRemoteIpAddr instead.""",
+            "reference" :
+                """Link Bundling in MPLS Traffic Engineering (TE), RFC 4201""",
+        }, # column
+        "teLinkOutgoingIfId" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.1.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "InterfaceIndexOrZero"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """If the link is unnumbered, the outgoing interface identifier
+is set to the outgoing interface identifier chosen for the
+TE link by the advertising LSR.  If the link is numbered, the
+value of this object is 0 and the address is stored in the
+teLinkLocalIpAddr instead.""",
+            "reference" :
+                """Link Bundling in MPLS Traffic Engineering (TE), RFC 4201""",
+        }, # column
+        "teLinkRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.1.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This variable is used to create, modify, and/or
+delete a row in this table.  None of the writable objects in
+a row can be changed if status is active(1).""",
+        }, # column
+        "teLinkStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.1.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The storage type for this conceptual row in the
+teLinkTable.  Conceptual rows having the value
+'permanent' need not allow write-access to any
+columnar object in the row.""",
+        }, # column
+        "teLinkDescriptorTable" : {
+            "nodetype" : "table",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.2",
+            "status" : "current",
+            "description" :
+                """This table specifies the interface switching capability
+descriptors associated with the TE links.""",
+        }, # table
+        "teLinkDescriptorEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.2.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "teLinkDescriptorId",
+            ],
+            "description" :
+                """An entry in this table is created for every TE link interface
+switching capability descriptor.  An ifEntry in the ifTable
+must exist before a teLinkDescriptorEntry using the same
+ifIndex is created.  ifType of ifEntry must be teLink(200).
+If a TE link entry in the ifTable is destroyed, then so are
+all of the entries in the teLinkDescriptorTable that use the
+ifIndex of this TE link.""",
+        }, # row
+        "teLinkDescriptorId" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "4294967295"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "4294967295"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """This object specifies the link descriptor identifier.""",
+        }, # column
+        "teLinkDescrSwitchingCapability" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkSwitchingCapability"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This attribute specifies interface switching capability of
+the TE link, which is derived from its component links.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "teLinkDescrEncodingType" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkEncodingType"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This attribute specifies the TE link encoding type.""",
+            "reference" :
+                """Generalized Multi-Protocol Label Switching (GMPLS)
+Signaling Functional Description, RFC 3471""",
+        }, # column
+        "teLinkDescrMinLspBandwidth" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkBandwidth"},
+            },
+            "access" : "readwrite",
+            "units" : "bps",
+            "description" :
+                """This attribute specifies the minimum LSP bandwidth on
+the TE link.  This is derived from the union of the
+minimum LSP bandwidth of all the component links
+associated with the TE link that can be used to carry
+live traffic.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "teLinkDescrMaxLspBandwidthPrio0" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkBandwidth"},
+            },
+            "access" : "readwrite",
+            "units" : "bps",
+            "description" :
+                """This attribute specifies the maximum LSP bandwidth at
+priority 0 on the TE link.  This is the union of the maximum
+LSP bandwidth at priority 0 of all the component links within
+the TE link that can be used to carry live traffic.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "teLinkDescrMaxLspBandwidthPrio1" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.2.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkBandwidth"},
+            },
+            "access" : "readwrite",
+            "units" : "bps",
+            "description" :
+                """This attribute specifies the maximum LSP bandwidth at
+priority 1 on the TE link.  This is the union of the maximum
+LSP bandwidth at priority 1 of all the component links within
+the TE link that can be used to carry live traffic.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "teLinkDescrMaxLspBandwidthPrio2" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.2.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkBandwidth"},
+            },
+            "access" : "readwrite",
+            "units" : "bps",
+            "description" :
+                """This attribute specifies the maximum LSP bandwidth at
+priority 2 on the TE link.  This is the union of the maximum
+
+
+
+LSP bandwidth at priority 2 of all the component links within
+the TE link that can be used to carry live traffic.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "teLinkDescrMaxLspBandwidthPrio3" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.2.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkBandwidth"},
+            },
+            "access" : "readwrite",
+            "units" : "bps",
+            "description" :
+                """This attribute specifies the maximum LSP bandwidth at
+priority 3 on the TE link.  This is the union of the maximum
+LSP bandwidth at priority 3 of all the component links within
+the TE link that can be used to carry live traffic.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "teLinkDescrMaxLspBandwidthPrio4" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.2.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkBandwidth"},
+            },
+            "access" : "readwrite",
+            "units" : "bps",
+            "description" :
+                """This attribute specifies the maximum LSP bandwidth at
+priority 4 on the TE link.  This is the union of the maximum
+LSP bandwidth at priority 4 of all the component links within
+the TE link that can be used to carry live traffic.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "teLinkDescrMaxLspBandwidthPrio5" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.2.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkBandwidth"},
+            },
+            "access" : "readwrite",
+            "units" : "bps",
+            "description" :
+                """This attribute specifies the maximum LSP bandwidth at
+priority 5 on the TE link.  This is the union of the maximum
+LSP bandwidth at priority 5 of all the component links within
+the TE link that can be used to carry live traffic.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "teLinkDescrMaxLspBandwidthPrio6" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.2.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkBandwidth"},
+            },
+            "access" : "readwrite",
+            "units" : "bps",
+            "description" :
+                """This attribute specifies the maximum LSP bandwidth at
+priority 6 on the TE link.  This is the union of the maximum
+LSP bandwidth at priority 6 of all the component links within
+the TE link that can be used to carry live traffic.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "teLinkDescrMaxLspBandwidthPrio7" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.2.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkBandwidth"},
+            },
+            "access" : "readwrite",
+            "units" : "bps",
+            "description" :
+                """This attribute specifies the maximum LSP bandwidth at
+priority 7 on the TE link.  This is the union of the maximum
+LSP bandwidth at priority 7 of all the component links within
+the TE link that can be used to carry live traffic.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "teLinkDescrInterfaceMtu" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.2.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This attribute specifies the interface MTU for the TE
+link descriptor.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "teLinkDescrIndication" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.2.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkSonetSdhIndication"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This attribute specifies whether this interface supports
+Standard or Arbitrary SONET/SDH.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "teLinkDescrRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.2.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This variable is used to create, modify, and/or
+delete a row in this table.  No read-create object
+can be changed if teLinkDescrRowStatus is in the active(1)
+state.""",
+        }, # column
+        "teLinkDescrStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.2.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The storage type for this conceptual row in the
+teLinkDescriptorTable.  Conceptual rows having the value
+'permanent' need not allow write-access to any
+columnar object in the row.""",
+        }, # column
+        "teLinkSrlgTable" : {
+            "nodetype" : "table",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.3",
+            "status" : "current",
+            "description" :
+                """This table specifies the SRLGs associated with TE links.""",
+        }, # table
+        "teLinkSrlgEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.3.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "teLinkSrlg",
+            ],
+            "description" :
+                """An entry in this table contains information about an
+SRLG associated with a TE link.
+An ifEntry in the ifTable must exist before a
+teLinkSrlgEntry using the same ifIndex is created.
+The ifType of ifEntry must be teLink(200).
+If a TE link entry in the ifTable is destroyed, then so
+are all of the entries in the teLinkSrlgTable that use the
+ifIndex of this TE link.""",
+        }, # row
+        "teLinkSrlg" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4294967295"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4294967295"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """This identifies an SRLG supported by the TE link.  An SRLG is
+identified with a 32-bit number that is unique within an IGP
+domain.  Zero is a valid SRLG number.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "teLinkSrlgRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This variable is used to create, modify, and/or
+delete a row in this table.  No read-create object can
+be modified if teLinkSrlgRowStatus is active(1).""",
+        }, # column
+        "teLinkSrlgStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The storage type for this conceptual row in the
+
+
+
+teLinkSrlgTable.  Conceptual rows having the value
+'permanent' need not allow write-access to any
+columnar object in the row.""",
+        }, # column
+        "teLinkBandwidthTable" : {
+            "nodetype" : "table",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.4",
+            "status" : "current",
+            "description" :
+                """This table specifies the priority-based bandwidth table
+for TE links.""",
+        }, # table
+        "teLinkBandwidthEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.4.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "teLinkBandwidthPriority",
+            ],
+            "description" :
+                """An entry in this table contains information about
+the priority-based bandwidth of TE links.  An ifEntry in the
+ifTable must exist before a teLinkBandwidthEntry using the
+same ifIndex is created.  The ifType of ifEntry must be
+teLink(200).  If a TE link entry in the ifTable is destroyed,
+then so are all of the entries in the teLinkBandwidthTable
+that use the ifIndex of this TE link.""",
+        }, # row
+        "teLinkBandwidthPriority" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.4.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkPriority"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This attribute specifies the priority.  A value of 0 is valid
+as specified in the 'Traffic Engineering (TE) Extensions to
+
+
+
+OSPF Version 2' document.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203 and
+Traffic Engineering (TE) Extensions to OSPF Version 2,
+RFC 3630""",
+        }, # column
+        "teLinkBandwidthUnreserved" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.4.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkBandwidth"},
+            },
+            "access" : "readonly",
+            "units" : "bps",
+            "description" :
+                """This attribute specifies the TE link unreserved
+bandwidth at priority p.  It is the sum of the unreserved
+bandwidths at priority p of all component links associated
+with the TE link (excluding all links that are strictly
+used as protecting links).""",
+            "reference" :
+                """Link Bundling in MPLS Traffic Engineering (TE), RFC 4201""",
+        }, # column
+        "teLinkBandwidthRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.4.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This variable is used to create, modify, and/or
+delete a row in this table.  No read-create object
+can be modified when teLinkBandwidthRowStatus is active(1).""",
+        }, # column
+        "teLinkBandwidthStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.4.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The storage type for this conceptual row in the
+teLinkBandwidthTable.  Conceptual rows having the value
+'permanent' need not allow write-access to any
+columnar object in the row.""",
+        }, # column
+        "componentLinkTable" : {
+            "nodetype" : "table",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.5",
+            "status" : "current",
+            "description" :
+                """This table specifies the component link parameters.""",
+        }, # table
+        "componentLinkEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.5.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+            ],
+            "description" :
+                """An entry in this table exists for each ifEntry that
+represents a component link.  An ifEntry must exist in
+the ifTable before a componentLinkEntry is created with
+the corresponding ifIndex.  ifEntry's ifType can be
+of any interface type that has been defined for TE Link
+interworking.  Examples include ATM, Frame Relay, Ethernet,
+etc.  If an entry representing a component link is destroyed
+in the ifTable, then so is the corresponding entry in the
+componentLinkTable.  The administrative and operational
+status values are controlled from the ifEntry.""",
+        }, # row
+        "componentLinkMaxResBandwidth" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.5.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkBandwidth"},
+            },
+            "access" : "readwrite",
+            "units" : "bps",
+            "description" :
+                """This attribute specifies the maximum reservable bandwidth on
+the component link.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "componentLinkPreferredProtection" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.5.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkProtection"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This attribute specifies whether this component link is
+a primary or secondary entity.""",
+        }, # column
+        "componentLinkCurrentProtection" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.5.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkProtection"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This attribute specifies whether this component link is
+currently used as primary or secondary link.""",
+        }, # column
+        "componentLinkRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.5.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This variable is used to create, modify, and/or
+delete a row in this table.  No read-create object
+can be modified when componentLinkRowStatus is active(1).""",
+        }, # column
+        "componentLinkStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.5.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The storage type for this conceptual row in the
+componentLinkTable.  Conceptual rows having the value
+'permanent' need not allow write-access to any
+columnar object in the row.""",
+        }, # column
+        "componentLinkDescriptorTable" : {
+            "nodetype" : "table",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.6",
+            "status" : "current",
+            "description" :
+                """This table specifies the interface switching capability
+descriptors associated with the component links.""",
+        }, # table
+        "componentLinkDescriptorEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.6.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "componentLinkDescrId",
+            ],
+            "description" :
+                """An entry in this table is created for every component link
+descriptor.  An ifEntry in the ifTable must exist before a
+componentLinkDescriptorEntry using the same ifIndex is
+created.  ifEntry's ifType can be of any interface type that
+has been defined for TE Link interworking.  Examples include
+ATM, Frame Relay, Ethernet, etc.  If a component link entry
+in the ifTable is destroyed, then so are all entries in the
+componentLinkDescriptorTable that use the ifIndex of this
+component link.""",
+        }, # row
+        "componentLinkDescrId" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.6.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "4294967295"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "4294967295"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """This object specifies the link descriptor identifier.""",
+        }, # column
+        "componentLinkDescrSwitchingCapability" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.6.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkSwitchingCapability"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This attribute specifies link multiplexing capabilities of
+the component link.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "componentLinkDescrEncodingType" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.6.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkEncodingType"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This attribute specifies the component link encoding type.""",
+            "reference" :
+                """Generalized Multi-Protocol Label Switching (GMPLS) Signaling
+Functional Description, RFC 3471""",
+        }, # column
+        "componentLinkDescrMinLspBandwidth" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.6.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkBandwidth"},
+            },
+            "access" : "readwrite",
+            "units" : "bps",
+            "description" :
+                """This attribute specifies the minimum LSP bandwidth on
+the component link.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "componentLinkDescrMaxLspBandwidthPrio0" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.6.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkBandwidth"},
+            },
+            "access" : "readwrite",
+            "units" : "bps",
+            "description" :
+                """This attribute specifies the maximum LSP bandwidth at
+priority 0 on the component link.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "componentLinkDescrMaxLspBandwidthPrio1" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.6.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkBandwidth"},
+            },
+            "access" : "readwrite",
+            "units" : "bps",
+            "description" :
+                """This attribute specifies the maximum LSP bandwidth at
+priority 1 on the component link.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "componentLinkDescrMaxLspBandwidthPrio2" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.6.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkBandwidth"},
+            },
+            "access" : "readwrite",
+            "units" : "bps",
+            "description" :
+                """This attribute specifies the maximum LSP bandwidth at
+priority 2 on the component link.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "componentLinkDescrMaxLspBandwidthPrio3" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.6.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkBandwidth"},
+            },
+            "access" : "readwrite",
+            "units" : "bps",
+            "description" :
+                """This attribute specifies the maximum LSP bandwidth at
+priority 3 on the component link.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "componentLinkDescrMaxLspBandwidthPrio4" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.6.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkBandwidth"},
+            },
+            "access" : "readwrite",
+            "units" : "bps",
+            "description" :
+                """This attribute specifies the maximum LSP bandwidth at
+priority 4 on the component link.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "componentLinkDescrMaxLspBandwidthPrio5" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.6.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkBandwidth"},
+            },
+            "access" : "readwrite",
+            "units" : "thousand bps",
+            "description" :
+                """This attribute specifies the maximum LSP bandwidth at
+priority 5 on the component link.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "componentLinkDescrMaxLspBandwidthPrio6" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.6.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkBandwidth"},
+            },
+            "access" : "readwrite",
+            "units" : "bps",
+            "description" :
+                """This attribute specifies the maximum LSP bandwidth at
+priority 6 on the component link.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "componentLinkDescrMaxLspBandwidthPrio7" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.6.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkBandwidth"},
+            },
+            "access" : "readwrite",
+            "units" : "bps",
+            "description" :
+                """This attribute specifies the maximum LSP bandwidth at
+priority 7 on the component link.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "componentLinkDescrInterfaceMtu" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.6.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This attribute specifies the interface MTU for the component
+link descriptor.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "componentLinkDescrIndication" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.6.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkSonetSdhIndication"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This attribute specifies whether this interface supports
+Standard or Arbitrary SONET/SDH.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "componentLinkDescrRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.6.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This variable is used to create, modify, and/or
+delete a row in this table.  No read-create object
+can be modified when componentLinkDescrRowStatus
+is active(1).""",
+        }, # column
+        "componentLinkDescrStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.6.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The storage type for this conceptual row in the
+componentLinkDescriptorTable.  Conceptual rows
+having the value 'permanent' need not allow write-access
+to any columnar object in the row.""",
+        }, # column
+        "componentLinkBandwidthTable" : {
+            "nodetype" : "table",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.7",
+            "status" : "current",
+            "description" :
+                """This table specifies the priority-based bandwidth
+for component links.""",
+        }, # table
+        "componentLinkBandwidthEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.7.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+                "componentLinkBandwidthPriority",
+            ],
+            "description" :
+                """An entry in this table contains information about
+the priority-based bandwidth on component links.
+An ifEntry in the ifTable must exist before a
+componentLinkBandwidthEntry using the same ifIndex is
+created.  ifEntry's ifType can be of any interface type that
+has been defined for TE Link interworking.  Examples
+include ATM, Frame Relay, Ethernet, etc.  If a component link
+entry in the ifTable is destroyed, then so are all entries
+in the componentLinkBandwidthTable that use the ifIndex of
+this component link.""",
+        }, # row
+        "componentLinkBandwidthPriority" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.7.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkPriority"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This attribute specifies the priority.  A value of 0 is valid
+as specified in the 'Traffic Engineering (TE) Extensions to
+ OSPF Version 2' document.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203 and
+Traffic Engineering (TE) Extensions to OSPF Version 2,
+RFC 3630""",
+        }, # column
+        "componentLinkBandwidthUnreserved" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.7.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"TE-LINK-STD-MIB", "name" : "TeLinkBandwidth"},
+            },
+            "access" : "readonly",
+            "units" : "bps",
+            "description" :
+                """This attribute specifies the component link unreserved
+bandwidth at priority p.""",
+            "reference" :
+                """OSPF Extensions in Support of Generalized Multi-Protocol
+Label Switching (GMPLS), RFC 4203""",
+        }, # column
+        "componentLinkBandwidthRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.7.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This variable is used to create, modify, and/or
+delete a row in this table.  No read-create object can
+be modified when componentLinkBandwidthRowStatus is
+active(1).""",
+        }, # column
+        "componentLinkBandwidthStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.1.7.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The storage type for this conceptual row in the
+componentLinkBandwidthTable.  Conceptual rows
+having the value 'permanent' need not allow write-access
+to any columnar object in the row.""",
+        }, # column
+        "teLinkConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.2",
+        }, # node
+        "teLinkCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.2.1",
+        }, # node
+        "teLinkGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.2.2",
+        }, # node
+    }, # nodes
+
+    "groups" : {
+        "teLinkGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.2.2.1",
+            "status" : "current",
+            "members" : {
+                "teLinkAddressType" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkLocalIpAddr" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkRemoteIpAddr" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkMetric" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkProtectionType" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkWorkingPriority" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkResourceClass" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkIncomingIfId" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkOutgoingIfId" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkDescrSwitchingCapability" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkDescrEncodingType" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkDescrRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkDescrStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkPreferredProtection" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkCurrentProtection" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkDescrSwitchingCapability" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkDescrEncodingType" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkDescrRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkDescrStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Collection of objects needed for the management of
+resources associated with TE links.""",
+        }, # group
+        "teLinkSrlgGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.2.2.2",
+            "status" : "current",
+            "members" : {
+                "teLinkSrlgRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkSrlgStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Collection of objects needed for the management of
+SRLG resources associated with TE links.""",
+        }, # group
+        "teLinkBandwidthGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.2.2.3",
+            "status" : "current",
+            "members" : {
+                "teLinkMaximumReservableBandwidth" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkDescrMaxLspBandwidthPrio0" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkDescrMaxLspBandwidthPrio1" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkDescrMaxLspBandwidthPrio2" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkDescrMaxLspBandwidthPrio3" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkDescrMaxLspBandwidthPrio4" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkDescrMaxLspBandwidthPrio5" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkDescrMaxLspBandwidthPrio6" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkDescrMaxLspBandwidthPrio7" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkBandwidthUnreserved" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkBandwidthRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkBandwidthStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Collection of objects needed for the management of
+the bandwidth resources associated with TE links and
+component links.""",
+        }, # group
+        "componentLinkBandwidthGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.2.2.4",
+            "status" : "current",
+            "members" : {
+                "componentLinkMaxResBandwidth" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkDescrMaxLspBandwidthPrio0" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkDescrMaxLspBandwidthPrio1" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkDescrMaxLspBandwidthPrio2" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkDescrMaxLspBandwidthPrio3" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkDescrMaxLspBandwidthPrio4" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkDescrMaxLspBandwidthPrio5" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkDescrMaxLspBandwidthPrio6" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkDescrMaxLspBandwidthPrio7" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkBandwidthUnreserved" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkBandwidthRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkBandwidthStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Collection of objects needed for the management of the
+bandwidth parameters associated with component links.""",
+        }, # group
+        "teLinkPscGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.2.2.5",
+            "status" : "current",
+            "members" : {
+                "teLinkDescrMinLspBandwidth" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkDescrInterfaceMtu" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkDescrMinLspBandwidth" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkDescrInterfaceMtu" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Collection of objects needed for devices that are
+packet switch capable.""",
+        }, # group
+        "teLinkTdmGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.2.2.6",
+            "status" : "current",
+            "members" : {
+                "teLinkDescrMinLspBandwidth" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkDescrIndication" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkDescrMinLspBandwidth" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkDescrIndication" : {
+                    "nodetype" : "member",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Collection of objects needed for devices that are
+TDM switching capable.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "teLinkModuleFullCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.2.1.1",
+            "status" : "current",
+            "description" :
+                """Compliance statement for agents that support read-create
+so that both configuration and monitoring of TE links can
+be accomplished via this MIB module.""",
+            "requires" : {
+                "teLinkGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkBandwidthGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkBandwidthGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkSrlgGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "TE-LINK-STD-MIB",
+                    "description" :
+                        """This group is mandatory for GMPLS enabled devices.""",
+                },
+                "teLinkPscGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "TE-LINK-STD-MIB",
+                    "description" :
+                        """This group is mandatory for devices that support the
+packet switching capability.""",
+                },
+                "teLinkTdmGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "TE-LINK-STD-MIB",
+                    "description" :
+                        """This group is mandatory for devices that support the TDM
+switching capability.""",
+                },
+            }, # requires
+            "refinements" : {
+                "teLinkAddressType" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddressType",
+                            },
+                            "unknown" : {
+                                "nodetype" : "namednumber",
+                                "number" : "0"
+                            },
+                            "ipv4" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "ipv6" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """Only ipv4(1) and ipv6(2) address types need to be
+supported for numbered links.  For unnumbered links, the
+unknown(0) address type needs to be supported.""",
+                },
+                "teLinkLocalIpAddr" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "OctetString",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddress",
+                            },
+                            "ranges" : [
+                            {
+                                "min" : "0",
+                                "max" : "0"
+                            },
+                            {
+                                "min" : "4",
+                                "max" : "4"
+                            },
+                            {
+                                "min" : "16",
+                                "max" : "16"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "0",
+                                "max" : "16"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """Size of TE link IP address depends on type of TE link.
+TE link IP address size is zero if the link is unnumbered,
+four if the link IP address is IPv4, and sixteen if the
+link IP address is IPv6.""",
+                },
+                "teLinkRemoteIpAddr" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "OctetString",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddress",
+                            },
+                            "ranges" : [
+                            {
+                                "min" : "0",
+                                "max" : "0"
+                            },
+                            {
+                                "min" : "4",
+                                "max" : "4"
+                            },
+                            {
+                                "min" : "16",
+                                "max" : "16"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "0",
+                                "max" : "16"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """Size of TE link IP address depends on type of TE link.
+TE link IP address size is zero if the link is unnumbered,
+four if the link IP address is IPv4, and sixteen if the
+link IP address is IPv6.""",
+                },
+                "teLinkRowStatus" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "notInService" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "writesyntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "notInService" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                            "createAndGo" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                            "destroy" : {
+                                "nodetype" : "namednumber",
+                                "number" : "6"
+                            },
+                        },
+                    }, # writesyntax
+                    "description" :
+                        """Support for notReady(3) and createAndWait(5) is
+not required.""",
+                },
+                "teLinkDescrRowStatus" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "notInService" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "writesyntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "notInService" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                            "createAndGo" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                            "destroy" : {
+                                "nodetype" : "namednumber",
+                                "number" : "6"
+                            },
+                        },
+                    }, # writesyntax
+                    "description" :
+                        """Support for notReady(3) and createAndWait(5) is
+not required.""",
+                },
+                "teLinkSrlgRowStatus" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "notInService" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "writesyntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "notInService" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                            "createAndGo" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                            "destroy" : {
+                                "nodetype" : "namednumber",
+                                "number" : "6"
+                            },
+                        },
+                    }, # writesyntax
+                    "description" :
+                        """Support for notReady(3) and createAndWait(5) is
+not required.""",
+                },
+                "teLinkBandwidthRowStatus" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "notInService" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "writesyntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "notInService" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                            "createAndGo" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                            "destroy" : {
+                                "nodetype" : "namednumber",
+                                "number" : "6"
+                            },
+                        },
+                    }, # writesyntax
+                    "description" :
+                        """Support for notReady(3) and createAndWait(5) is
+not required.""",
+                },
+                "componentLinkRowStatus" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "notInService" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "writesyntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "notInService" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                            "createAndGo" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                            "destroy" : {
+                                "nodetype" : "namednumber",
+                                "number" : "6"
+                            },
+                        },
+                    }, # writesyntax
+                    "description" :
+                        """Support for notReady(3) and createAndWait(5) is
+not required.""",
+                },
+                "componentLinkDescrRowStatus" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "notInService" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "writesyntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "notInService" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                            "createAndGo" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                            "destroy" : {
+                                "nodetype" : "namednumber",
+                                "number" : "6"
+                            },
+                        },
+                    }, # writesyntax
+                    "description" :
+                        """Support for notReady(3) and createAndWait(5) is
+not required.""",
+                },
+                "componentLinkBandwidthRowStatus" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "notInService" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "writesyntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "notInService" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                            "createAndGo" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                            "destroy" : {
+                                "nodetype" : "namednumber",
+                                "number" : "6"
+                            },
+                        },
+                    }, # writesyntax
+                    "description" :
+                        """Support for notReady(3) and createAndWait(5) is
+not required.""",
+                },
+            }, # refinements
+
+        }, # compliance
+        "teLinkModuleReadOnlyCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "TE-LINK-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.200.2.1.2",
+            "status" : "current",
+            "description" :
+                """Compliance statement for agents that support the
+monitoring of the TE link MIB module.""",
+            "requires" : {
+                "teLinkGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkBandwidthGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "componentLinkBandwidthGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "TE-LINK-STD-MIB"
+                },
+                "teLinkSrlgGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "TE-LINK-STD-MIB",
+                    "description" :
+                        """This group is mandatory for GMPLS enabled devices.""",
+                },
+                "teLinkPscGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "TE-LINK-STD-MIB",
+                    "description" :
+                        """This group is mandatory for devices that support the
+packet switching capability.""",
+                },
+                "teLinkTdmGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "TE-LINK-STD-MIB",
+                    "description" :
+                        """This group is mandatory for devices that support the TDM
+switching capability.""",
+                },
+            }, # requires
+            "refinements" : {
+                "teLinkAddressType" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddressType",
+                            },
+                            "unknown" : {
+                                "nodetype" : "namednumber",
+                                "number" : "0"
+                            },
+                            "ipv4" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "ipv6" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Only ipv4(1) and ipv6(2) address types need to be
+supported for numbered links.  For unnumbered links, the
+unknown(0) address type needs to be supported.""",
+                },
+                "teLinkLocalIpAddr" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "OctetString",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddress",
+                            },
+                            "ranges" : [
+                            {
+                                "min" : "0",
+                                "max" : "0"
+                            },
+                            {
+                                "min" : "4",
+                                "max" : "4"
+                            },
+                            {
+                                "min" : "16",
+                                "max" : "16"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "0",
+                                "max" : "16"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Size of TE link IP address depends on type of TE link.
+TE link IP address size is zero if the link is unnumbered,
+four if the link IP address is IPv4, and sixteen if the
+link IP address is IPv6.""",
+                },
+                "teLinkRemoteIpAddr" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "OctetString",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddress",
+                            },
+                            "ranges" : [
+                            {
+                                "min" : "0",
+                                "max" : "0"
+                            },
+                            {
+                                "min" : "4",
+                                "max" : "4"
+                            },
+                            {
+                                "min" : "16",
+                                "max" : "16"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "0",
+                                "max" : "16"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Size of TE link IP address depends on type of TE link.
+TE link IP address size is zero if the link is unnumbered,
+four if the link IP address is IPv4, and sixteen if the
+link IP address is IPv6.""",
+                },
+                "teLinkProtectionType" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "teLinkWorkingPriority" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "teLinkRowStatus" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required and active(1) is the
+only status that needs to be supported.""",
+                },
+                "teLinkStorageType" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "teLinkDescrSwitchingCapability" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "teLinkDescrEncodingType" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "teLinkDescrMinLspBandwidth" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "teLinkDescrMaxLspBandwidthPrio0" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "teLinkDescrMaxLspBandwidthPrio1" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "teLinkDescrMaxLspBandwidthPrio2" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "teLinkDescrMaxLspBandwidthPrio3" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "teLinkDescrMaxLspBandwidthPrio4" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "teLinkDescrMaxLspBandwidthPrio5" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "teLinkDescrMaxLspBandwidthPrio6" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "teLinkDescrMaxLspBandwidthPrio7" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "teLinkDescrRowStatus" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required and active(1) is the
+only status that needs to be supported.""",
+                },
+                "teLinkDescrStorageType" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "teLinkSrlgRowStatus" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required and active(1) is the
+only status that needs to be supported.""",
+                },
+                "teLinkSrlgStorageType" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "teLinkBandwidthRowStatus" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required and active(1) is the
+only status that needs to be supported.""",
+                },
+                "teLinkBandwidthStorageType" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "componentLinkMaxResBandwidth" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "componentLinkPreferredProtection" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "componentLinkRowStatus" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required and active(1) is the
+only status that needs to be supported.""",
+                },
+                "componentLinkStorageType" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "componentLinkDescrSwitchingCapability" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "componentLinkDescrEncodingType" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "componentLinkDescrMinLspBandwidth" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "componentLinkDescrMaxLspBandwidthPrio0" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "componentLinkDescrMaxLspBandwidthPrio1" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "componentLinkDescrMaxLspBandwidthPrio2" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "componentLinkDescrMaxLspBandwidthPrio3" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "componentLinkDescrMaxLspBandwidthPrio4" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "componentLinkDescrMaxLspBandwidthPrio5" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "componentLinkDescrMaxLspBandwidthPrio6" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "componentLinkDescrMaxLspBandwidthPrio7" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "componentLinkDescrInterfaceMtu" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "componentLinkDescrIndication" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "componentLinkDescrRowStatus" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required and active(1) is the
+
+
+
+only status that needs to be supported.""",
+                },
+                "componentLinkDescrStorageType" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "componentLinkBandwidthRowStatus" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required and active(1) is the
+only status that needs to be supported.""",
+                },
+                "componentLinkBandwidthStorageType" : {
+                    "module" : "TE-LINK-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+            }, # refinements
+
+        }, # compliance
+    }, # compliances
+
+}