logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/BFD-STD-MIB.dic

@@ -0,0 +1,2367 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python BFD-STD-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/BFD-STD-MIB"
+
+MIB = {
+    "moduleName" : "BFD-STD-MIB",
+
+    "BFD-STD-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF Bidirectional Forwarding Detection
+Working Group""",
+        "contact" : 
+            """Thomas D. Nadeau
+Brocade
+Email:  tnadeau@lucidvision.com
+
+Zafar Ali
+Cisco Systems, Inc.
+Email:  zali@cisco.com
+
+Nobo Akiya
+Cisco Systems, Inc.
+Email:  nobo@cisco.com
+
+Comments about this document should be emailed
+directly to the BFD Working Group mailing list
+at rtg-bfd@ietf.org""",
+        "description" :
+            """Bidirectional Forwarding Management Information Base.
+
+Copyright (c) 2014 IETF Trust and the persons identified
+as authors of the code.  All rights reserved.
+
+Redistribution and use in source and binary forms, with
+or without modification, is permitted pursuant to, and
+subject to the license terms contained in, the Simplified
+BSD License set forth in Section 4.c of the IETF Trust's
+Legal Provisions Relating to IETF Documents
+(http://trustee.ietf.org/license-info).""",
+        "revisions" : (
+            {
+                "date" : "2014-08-12 00:00",
+                "description" :
+                    """Initial version.  Published as RFC 7331.""",
+            },
+        ),
+        "identity node" : "bfdMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "NOTIFICATION-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "mib-2"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "SNMPv2-SMI", "name" : "Unsigned32"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter32"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter64"},
+        {"module" : "SNMPv2-TC", "name" : "TruthValue"},
+        {"module" : "SNMPv2-TC", "name" : "RowStatus"},
+        {"module" : "SNMPv2-TC", "name" : "StorageType"},
+        {"module" : "SNMPv2-TC", "name" : "TimeStamp"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "SNMPv2-CONF", "name" : "NOTIFICATION-GROUP"},
+        {"module" : "IF-MIB", "name" : "InterfaceIndexOrZero"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetAddress"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetAddressType"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetPortNumber"},
+        {"module" : "DIFFSERV-MIB", "name" : "IndexIntegerNextFree"},
+        {"module" : "BFD-TC-STD-MIB", "name" : "BfdSessIndexTC"},
+        {"module" : "BFD-TC-STD-MIB", "name" : "BfdIntervalTC"},
+        {"module" : "BFD-TC-STD-MIB", "name" : "BfdMultiplierTC"},
+        {"module" : "BFD-TC-STD-MIB", "name" : "BfdCtrlDestPortNumberTC"},
+        {"module" : "BFD-TC-STD-MIB", "name" : "BfdCtrlSourcePortNumberTC"},
+        {"module" : "IANA-BFD-TC-STD-MIB", "name" : "IANAbfdDiagTC"},
+        {"module" : "IANA-BFD-TC-STD-MIB", "name" : "IANAbfdSessTypeTC"},
+        {"module" : "IANA-BFD-TC-STD-MIB", "name" : "IANAbfdSessOperModeTC"},
+        {"module" : "IANA-BFD-TC-STD-MIB", "name" : "IANAbfdSessStateTC"},
+        {"module" : "IANA-BFD-TC-STD-MIB", "name" : "IANAbfdSessAuthenticationTypeTC"},
+        {"module" : "IANA-BFD-TC-STD-MIB", "name" : "IANAbfdSessAuthenticationKeyTC"},
+    ),
+
+    "nodes" : {
+        "bfdMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222",
+            "status" : "current",
+        }, # node
+        "bfdNotifications" : {
+            "nodetype" : "node",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.0",
+        }, # node
+        "bfdObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1",
+        }, # node
+        "bfdScalarObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.1",
+        }, # node
+        "bfdAdminStatus" : {
+            "nodetype" : "scalar",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "enabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "disabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "adminDown" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "down" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The desired global administrative status of the
+BFD system in this device.""",
+        }, # scalar
+        "bfdOperStatus" : {
+            "nodetype" : "scalar",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "up" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "down" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "adminDown" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Indicates the actual operational status of the
+BFD system in this device.  When this value is
+down(2), all entries in the bfdSessTable MUST have
+their bfdSessOperStatus as down(2) as well.  When
+this value is adminDown(3), all entries in the
+bfdSessTable MUST have their bfdSessOperStatus
+as adminDown(3) as well.""",
+        }, # scalar
+        "bfdNotificationsEnable" : {
+            "nodetype" : "scalar",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "default" : "false",
+            "description" :
+                """If this object is set to true(1), then it enables
+the emission of bfdSessUp and bfdSessDown
+notifications; otherwise, these notifications are not
+emitted.""",
+            "reference" :
+                """See also RFC 3413, Simple Network Management Protocol (SNMP)
+Applications, for explanation that
+notifications are under the ultimate control of the
+MIB modules in this document.""",
+        }, # scalar
+        "bfdSessIndexNext" : {
+            "nodetype" : "scalar",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "parent module" : {
+                        "name" : "DIFFSERV-MIB",
+                        "type" : "IndexIntegerNextFree",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4294967295"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4294967295"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object contains an unused value for
+bfdSessIndex that can be used when creating
+entries in the table.  A zero indicates that
+no entries are available, but it MUST NOT be used
+as a valid index. """,
+        }, # scalar
+        "bfdSessTable" : {
+            "nodetype" : "table",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2",
+            "status" : "current",
+            "description" :
+                """The BFD Session Table describes the BFD sessions.""",
+            "reference" :
+                """RFC 5880, Bidirectional Forwarding Detection (BFD).""",
+        }, # table
+        "bfdSessEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "bfdSessIndex",
+            ],
+            "description" :
+                """The BFD Session Entry describes the BFD session.""",
+        }, # row
+        "bfdSessIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"BFD-TC-STD-MIB", "name" : "BfdSessIndexTC"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This object contains an index used to represent a
+unique BFD session on this device.  Managers
+should obtain new values for row creation in this
+table by reading bfdSessIndexNext.""",
+        }, # column
+        "bfdSessVersionNumber" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "7"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "7"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "1",
+            "description" :
+                """The version number of the BFD protocol that this session
+is running in.  Write access is available for this object
+to provide the ability to set the desired version for this
+BFD session.""",
+            "reference" :
+                """RFC 5880, Bidirectional Forwarding Detection (BFD).""",
+        }, # column
+        "bfdSessType" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IANA-BFD-TC-STD-MIB", "name" : "IANAbfdSessTypeTC"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object specifies the type of this BFD session.""",
+        }, # column
+        "bfdSessDiscriminator" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "4294967295"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "4294967295"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object specifies the local discriminator for this BFD
+session, which is used to uniquely identify it.""",
+        }, # column
+        "bfdSessRemoteDiscr" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4294967295"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4294967295"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object specifies the session discriminator chosen
+by the remote system for this BFD session.  The value may
+be zero(0) if the remote discriminator is not yet known
+or if the session is in the down or adminDown(1) state.""",
+            "reference" :
+                """Section 6.8.6 of RFC 5880, Bidirectional
+Forwarding Detection (BFD).""",
+        }, # column
+        "bfdSessDestinationUdpPort" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"BFD-TC-STD-MIB", "name" : "BfdCtrlDestPortNumberTC"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """This object specifies the destination UDP port number
+used for this BFD session's Control packets.  The value
+may be zero(0) if the session is in adminDown(1) state.""",
+        }, # column
+        "bfdSessSourceUdpPort" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"BFD-TC-STD-MIB", "name" : "BfdCtrlSourcePortNumberTC"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """This object specifies the source UDP port number used
+for this BFD session's Control packets.  The value may be
+zero(0) if the session is in adminDown(1) state.  Upon
+creation of a new BFD session via this MIB, the value of
+zero(0) specified would permit the implementation to
+choose its own source port number.""",
+        }, # column
+        "bfdSessEchoSourceUdpPort" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetPortNumber"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """This object specifies the source UDP port number used for
+this BFD session's Echo packets.  The value may be zero(0)
+if the session is not running in the Echo mode, or the
+session is in adminDown(1) state.  Upon creation of a new
+BFD session via this MIB, the value of zero(0) would
+permit the implementation to choose its own source port
+number.""",
+        }, # column
+        "bfdSessAdminStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "enabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "disabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "adminDown" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "down" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """Denotes the desired operational status of the BFD session.
+
+A transition to enabled(1) will start the BFD state machine
+for the session.  The state machine will have an initial
+state of down(2).
+
+A transition to disabled(2) will stop the BFD state machine
+for the session.  The state machine may first transition to
+adminDown(1) prior to stopping.
+
+A transition to adminDown(3) will cause the BFD state
+machine to transition to adminDown(1) and will cause the
+session to remain in this state.
+
+A transition to down(4) will cause the BFD state machine
+to transition to down(2) and will cause the session to
+remain in this state.
+
+Care should be used in providing write access to this
+object without adequate authentication.""",
+        }, # column
+        "bfdSessOperStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "up" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "down" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "adminDown" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Denotes the actual operational status of the BFD session.
+If the value of bfdOperStatus is down(2), this value MUST
+eventually be down(2) as well.  If the value of
+bfdOperStatus is adminDown(3), this value MUST eventually
+be adminDown(3) as well.""",
+        }, # column
+        "bfdSessState" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IANA-BFD-TC-STD-MIB", "name" : "IANAbfdSessStateTC"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Configured BFD session state.""",
+        }, # column
+        "bfdSessRemoteHeardFlag" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object specifies the status of BFD packet reception from
+the remote system.  Specifically, it is set to true(1) if
+the local system is actively receiving BFD packets from the
+remote system and is set to false(2) if the local system
+has not received BFD packets recently (within the detection
+time) or if the local system is attempting to tear down
+the BFD session.""",
+            "reference" :
+                """RFC 5880, Bidirectional Forwarding Detection (BFD).""",
+        }, # column
+        "bfdSessDiag" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IANA-BFD-TC-STD-MIB", "name" : "IANAbfdDiagTC"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A diagnostic code specifying the local system's reason
+for the last transition of the session from up(4)
+to some other state.""",
+        }, # column
+        "bfdSessOperMode" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IANA-BFD-TC-STD-MIB", "name" : "IANAbfdSessOperModeTC"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object specifies the operational mode of this
+BFD session.""",
+        }, # column
+        "bfdSessDemandModeDesiredFlag" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "default" : "false",
+            "description" :
+                """This object indicates the local system's
+desire to use Demand mode.  Specifically, it is set
+to true(1) if the local system wishes to use
+Demand mode or false(2) if not.""",
+        }, # column
+        "bfdSessControlPlaneIndepFlag" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "default" : "false",
+            "description" :
+                """This object indicates the local system's
+ability to continue to function through a disruption of
+the control plane.  Specifically, it is set
+to true(1) if the local system BFD implementation is
+independent of the control plane.  Otherwise, the
+value is set to false(2).""",
+        }, # column
+        "bfdSessMultipointFlag" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.17",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "default" : "false",
+            "description" :
+                """This object indicates the Multipoint (M) bit for this
+session.  It is set to true(1) if the Multipoint (M) bit is
+set to 1.  Otherwise, the value is set to false(2).""",
+        }, # column
+        "bfdSessInterface" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.18",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "InterfaceIndexOrZero"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object contains an interface index used to indicate
+the interface that this BFD session is running on.  This
+value can be zero if there is no interface associated
+with this BFD session.""",
+        }, # column
+        "bfdSessSrcAddrType" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.19",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddressType"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object specifies the IP address type of the source IP
+address of this BFD session.  The value of unknown(0) is
+allowed only when the session is singleHop(1) and the
+source IP address of this BFD session is derived from
+the outgoing interface, or when the BFD session is not
+associated with a specific interface.  If any other
+unsupported values are attempted in a set operation, the
+
+
+
+agent MUST return an inconsistentValue error.""",
+        }, # column
+        "bfdSessSrcAddr" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.20",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddress"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object specifies the source IP address of this BFD
+session.  The format of this object is controlled by the
+bfdSessSrcAddrType object.""",
+        }, # column
+        "bfdSessDstAddrType" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.21",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddressType"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object specifies the IP address type of the neighboring
+IP address that is being monitored with this BFD session.
+The value of unknown(0) is allowed only when the session is
+singleHop(1) and the outgoing interface is of type
+point to point, or when the BFD session is not associated
+with a specific interface.  If any other unsupported values
+are attempted in a set operation, the agent MUST return an
+inconsistentValue error.""",
+        }, # column
+        "bfdSessDstAddr" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.22",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddress"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object specifies the neighboring IP address that is
+being monitored with this BFD session.  The format of this
+object is controlled by the bfdSessDstAddrType object.""",
+        }, # column
+        "bfdSessGTSM" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.23",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "default" : "true",
+            "description" :
+                """Setting the value of this object to false(2) will disable
+GTSM protection of the BFD session.  GTSM MUST be enabled
+on a singleHop(1) session if no authentication is in use.""",
+            "reference" :
+                """RFC 5082, The Generalized TTL Security Mechanism (GTSM).
+Section 5 of RFC 5881, Bidirectional Forwarding Detection
+(BFD) for IPv4 and IPv6 (Single Hop).""",
+        }, # column
+        "bfdSessGTSMTTL" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.24",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "255",
+            "description" :
+                """This object is valid only when bfdSessGTSM protection is
+enabled on the system.  This object indicates the minimum
+allowed Time to Live (TTL) for received BFD Control packets.
+For a singleHop(1) session, if GTSM protection is enabled,
+this object SHOULD be set to the maximum TTL value allowed
+for a single hop.
+
+By default, GTSM is enabled and the TTL value is 255.  For a
+multihop session, updating of the maximum TTL value allowed
+is likely required.""",
+            "reference" :
+                """RFC 5082, The Generalized TTL Security Mechanism (GTSM).
+Section 5 of RFC 5881, Bidirectional Forwarding Detection
+(BFD) for IPv4 and IPv6 (Single Hop).""",
+        }, # column
+        "bfdSessDesiredMinTxInterval" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.25",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"BFD-TC-STD-MIB", "name" : "BfdIntervalTC"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object specifies the minimum interval, in
+microseconds, that the local system would like to use
+when transmitting BFD Control packets.  The value of
+zero(0) is reserved in this case and should not be
+used.""",
+            "reference" :
+                """Section 4.1 of RFC 5880, Bidirectional Forwarding
+Detection (BFD).""",
+        }, # column
+        "bfdSessReqMinRxInterval" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.26",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"BFD-TC-STD-MIB", "name" : "BfdIntervalTC"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object specifies the minimum interval, in
+microseconds, between received BFD Control packets the
+local system is capable of supporting.  The value of
+zero(0) can be specified when the transmitting system
+does not want the remote system to send any periodic BFD
+Control packets.""",
+            "reference" :
+                """Section 4.1 of RFC 5880, Bidirectional Forwarding
+Detection (BFD).""",
+        }, # column
+        "bfdSessReqMinEchoRxInterval" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.27",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"BFD-TC-STD-MIB", "name" : "BfdIntervalTC"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object specifies the minimum interval, in
+microseconds, between received BFD Echo packets that this
+system is capable of supporting.  The value must be zero(0) if
+this is a multihop BFD session.""",
+        }, # column
+        "bfdSessDetectMult" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.28",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"BFD-TC-STD-MIB", "name" : "BfdMultiplierTC"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object specifies the Detect time multiplier.""",
+        }, # column
+        "bfdSessNegotiatedInterval" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.29",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"BFD-TC-STD-MIB", "name" : "BfdIntervalTC"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object specifies the negotiated interval, in
+microseconds, that the local system is transmitting
+BFD Control packets.""",
+        }, # column
+        "bfdSessNegotiatedEchoInterval" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.30",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"BFD-TC-STD-MIB", "name" : "BfdIntervalTC"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object specifies the negotiated interval, in
+microseconds, that the local system is transmitting
+
+
+
+BFD Echo packets.  The value is expected to be zero if
+the sessions are not running in Echo mode.""",
+        }, # column
+        "bfdSessNegotiatedDetectMult" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.31",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"BFD-TC-STD-MIB", "name" : "BfdMultiplierTC"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object specifies the Detect time multiplier.""",
+        }, # column
+        "bfdSessAuthPresFlag" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.32",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "default" : "false",
+            "description" :
+                """This object indicates the local system's
+desire to use authentication.  Specifically, it is set
+to true(1) if the local system wishes the session
+to be authenticated or false(2) if not.""",
+            "reference" :
+                """Sections 4.2 - 4.4 of RFC 5880, Bidirectional Forwarding
+Detection (BFD).""",
+        }, # column
+        "bfdSessAuthenticationType" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.33",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IANA-BFD-TC-STD-MIB", "name" : "IANAbfdSessAuthenticationTypeTC"},
+            },
+            "access" : "readwrite",
+            "default" : "noAuthentication",
+            "description" :
+                """The authentication type used for this BFD session.
+This field is valid only when the Authentication
+Present bit is set.  MAX-ACCESS to this object as well as
+other authentication-related objects are set to
+read-create in order to support management of a single
+key ID at a time; key rotation is not handled.  Key update
+in practice must be done by atomic update using a set
+containing all affected objects in the same varBindList
+or otherwise risk the session dropping.""",
+            "reference" :
+                """Sections 4.2 - 4.4 of RFC 5880, Bidirectional Forwarding
+Detection (BFD).""",
+        }, # column
+        "bfdSessAuthenticationKeyID" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.34",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-1",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-1",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "-1",
+            "description" :
+                """The authentication key ID in use for this session.  This
+object permits multiple keys to be active simultaneously.
+The value -1 indicates that no authentication key ID will
+be present in the optional BFD Authentication Section.""",
+            "reference" :
+                """Sections 4.2 - 4.4 of RFC 5880, Bidirectional Forwarding
+Detection (BFD).""",
+        }, # column
+        "bfdSessAuthenticationKey" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.35",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IANA-BFD-TC-STD-MIB", "name" : "IANAbfdSessAuthenticationKeyTC"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The authentication key.  When the
+bfdSessAuthenticationType is simplePassword(1), the value
+of this object is the password present in the BFD packets.
+
+When the bfdSessAuthenticationType is one of the keyed
+authentication types, this value is used in the
+computation of the key present in the BFD authentication
+packet.""",
+            "reference" :
+                """Sections 4.2 - 4.4 of RFC 5880, Bidirectional Forwarding
+Detection (BFD).""",
+        }, # column
+        "bfdSessStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.36",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This variable indicates the storage type for this
+object.  Conceptual rows having the value
+'permanent' need not allow write-access to any
+columnar objects in the row.""",
+        }, # column
+        "bfdSessRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.2.1.37",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This variable is used to create, modify, and/or
+delete a row in this table.  When a row in this
+table has a row in the active(1) state, no
+objects in this row can be modified except the
+bfdSessRowStatus and bfdSessStorageType.""",
+        }, # column
+        "bfdSessPerfTable" : {
+            "nodetype" : "table",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.3",
+            "status" : "current",
+            "description" :
+                """This table specifies BFD session performance counters.""",
+        }, # table
+        "bfdSessPerfEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.3.1",
+            "status" : "current",
+            "linkage" : [
+                { "BFD-STD-MIB" : {
+                    "indexkind" : "augments",
+                    "relatedNode" : "bfdSessEntry",
+                }},
+            ],
+            "description" :
+                """An entry in this table is created by a BFD-enabled node
+for every BFD session. bfdSessPerfDiscTime is used to
+indicate potential discontinuity for all counter objects
+in this table.""",
+        }, # row
+        "bfdSessPerfCtrlPktIn" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The total number of BFD control messages received for this
+BFD session.
+
+It MUST be equal to the least significant 32 bits of
+bfdSessPerfCtrlPktInHC if supported, and MUST do so
+with the rules spelled out in RFC 2863.""",
+        }, # column
+        "bfdSessPerfCtrlPktOut" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The total number of BFD control messages sent for this BFD
+session.
+
+It MUST be equal to the least significant 32 bits of
+bfdSessPerfCtrlPktOutHC if supported, and MUST do so
+with the rules spelled out in RFC 2863.""",
+        }, # column
+        "bfdSessPerfCtrlPktDrop" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The total number of BFD control messages received for this
+session yet dropped for being invalid.
+
+It MUST be equal to the least significant 32 bits of
+bfdSessPerfCtrlPktDropHC if supported, and MUST do so
+with the rules spelled out in RFC 2863.""",
+        }, # column
+        "bfdSessPerfCtrlPktDropLastTime" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.3.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime on the most recent occasion at
+which received the BFD control message for this session was
+dropped.  If no such up event exists, this object contains
+a zero value.""",
+        }, # column
+        "bfdSessPerfEchoPktIn" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.3.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The total number of BFD Echo messages received for this
+BFD session.
+
+It MUST be equal to the least significant 32 bits of
+bfdSessPerfEchoPktInHC if supported, and MUST do so
+with the rules spelled out in RFC 2863.""",
+        }, # column
+        "bfdSessPerfEchoPktOut" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.3.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The total number of BFD Echo messages sent for this BFD
+session.
+
+It MUST be equal to the least significant 32 bits of
+bfdSessPerfEchoPktOutHC if supported, and MUST do so
+with the rules spelled out in RFC 2863.""",
+        }, # column
+        "bfdSessPerfEchoPktDrop" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.3.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The total number of BFD Echo messages received for this
+session yet dropped for being invalid.
+
+It MUST be equal to the least significant 32 bits of
+bfdSessPerfEchoPktDropHC if supported, and MUST do so
+with the rules spelled out in RFC 2863.""",
+        }, # column
+        "bfdSessPerfEchoPktDropLastTime" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.3.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime on the most recent occasion at
+which received the BFD Echo message for this session was
+dropped.  If no such up event has been issued, this
+object contains a zero value.""",
+        }, # column
+        "bfdSessUpTime" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.3.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime on the most recent occasion at which
+the session came up.  If no such event has been issued,
+this object contains a zero value.""",
+        }, # column
+        "bfdSessPerfLastSessDownTime" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.3.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime on the most recent occasion at
+which the last time communication was lost with the
+neighbor.  If no down event has been issued, this object
+contains a zero value.""",
+        }, # column
+        "bfdSessPerfLastCommLostDiag" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.3.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IANA-BFD-TC-STD-MIB", "name" : "IANAbfdDiagTC"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The BFD diag code for the last time communication was lost
+with the neighbor.  If such an event has not been issued,
+this object contains a zero value.""",
+        }, # column
+        "bfdSessPerfSessUpCount" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.3.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times this session has gone into the Up
+state since the system last rebooted.""",
+        }, # column
+        "bfdSessPerfDiscTime" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.3.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime on the most recent occasion at
+which any one or more of the session counters suffered
+a discontinuity.
+
+The relevant counters are the specific instances associated
+with this BFD session of any Counter32 object contained in
+the BfdSessPerfTable.  If no such discontinuities have
+occurred since the last reinitialization of the local
+management subsystem, then this object contains a zero
+value.""",
+        }, # column
+        "bfdSessPerfCtrlPktInHC" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.3.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This value represents the total number of BFD control
+messages received for this BFD session.
+
+The least significant 32 bits MUST be equal to
+bfdSessPerfCtrlPktIn, and MUST do so with
+the rules spelled out in RFC 2863.""",
+        }, # column
+        "bfdSessPerfCtrlPktOutHC" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.3.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This value represents the total number of BFD control
+messages transmitted for this BFD session.
+
+The least significant 32 bits MUST be equal to
+bfdSessPerfCtrlPktOut, and MUST do so with
+the rules spelled out in RFC 2863.""",
+        }, # column
+        "bfdSessPerfCtrlPktDropHC" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.3.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This value represents the total number of BFD control
+messages received for this BFD session yet dropped for
+being invalid.
+
+The least significant 32 bits MUST be equal to
+bfdSessPerfCtrlPktDrop, and MUST do so with
+the rules spelled out in RFC 2863.""",
+        }, # column
+        "bfdSessPerfEchoPktInHC" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.3.1.17",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This value represents the total number of BFD Echo
+messages received for this BFD session.
+
+The least significant 32 bits MUST be equal to
+bfdSessPerfEchoPktIn, and MUST do so with
+the rules spelled out in RFC 2863.""",
+        }, # column
+        "bfdSessPerfEchoPktOutHC" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.3.1.18",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This value represents the total number of BFD Echo
+messages transmitted for this BFD session.
+
+The least significant 32 bits MUST be equal to
+bfdSessPerfEchoPktOut, and MUST do so with
+the rules spelled out in RFC 2863.""",
+        }, # column
+        "bfdSessPerfEchoPktDropHC" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.3.1.19",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This value represents the total number of BFD Echo
+messages received for this BFD session yet dropped
+for being invalid.
+
+
+
+The least significant 32 bits MUST be equal to
+bfdSessPerfEchoPktDrop, and MUST do so with
+the rules spelled out in RFC 2863.""",
+        }, # column
+        "bfdSessDiscMapTable" : {
+            "nodetype" : "table",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.4",
+            "status" : "current",
+            "description" :
+                """The BFD Session Discriminator Mapping Table maps a
+local discriminator value to the associated BFD session's
+bfdSessIndex found in the bfdSessionTable.""",
+        }, # table
+        "bfdSessDiscMapEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.4.1",
+            "status" : "current",
+            "linkage" : [
+                "bfdSessDiscriminator",
+            ],
+            "description" :
+                """The BFD Session Discriminator Mapping Entry
+specifies a mapping between a local discriminator
+and a BFD session.""",
+        }, # row
+        "bfdSessDiscMapIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.4.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"BFD-TC-STD-MIB", "name" : "BfdSessIndexTC"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object specifies a mapping between a
+local discriminator and a BFD session in
+the BfdSessTable.""",
+        }, # column
+        "bfdSessIpMapTable" : {
+            "nodetype" : "table",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.5",
+            "status" : "current",
+            "description" :
+                """The BFD Session IP Mapping Table maps given
+bfdSessInterface, bfdSessSrcAddrType, bfdSessSrcAddr,
+bfdSessDstAddrType, and bfdSessDstAddr
+to an associated BFD session found in the
+bfdSessionTable.""",
+        }, # table
+        "bfdSessIpMapEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.5.1",
+            "status" : "current",
+            "linkage" : [
+                "bfdSessInterface",
+                "bfdSessSrcAddrType",
+                "bfdSessSrcAddr",
+                "bfdSessDstAddrType",
+                "bfdSessDstAddr",
+            ],
+            "description" :
+                """The BFD Session IP Map Entry contains a mapping
+from the IP information for a session to the session
+in the bfdSessionTable.""",
+        }, # row
+        "bfdSessIpMapIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.1.5.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"BFD-TC-STD-MIB", "name" : "BfdSessIndexTC"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object specifies the BfdSessIndexTC referred
+to by the indexes of this row.  In essence, a mapping is
+provided between these indexes and the BfdSessTable.""",
+        }, # column
+        "bfdConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.2",
+        }, # node
+        "bfdGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.2.1",
+        }, # node
+        "bfdCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.2.2",
+        }, # node
+    }, # nodes
+
+    "notifications" : {
+        "bfdSessUp" : {
+            "nodetype" : "notification",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.0.1",
+            "status" : "current",
+            "objects" : {
+                "bfdSessDiag" : {
+                    "nodetype" : "object",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessDiag" : {
+                    "nodetype" : "object",
+                    "module" : "BFD-STD-MIB"
+                },
+            },
+            "description" :
+                """This notification is generated when the
+bfdSessState object for one or more contiguous
+entries in bfdSessTable are about to enter the up(4)
+state from some other state.  The included values of
+bfdSessDiag MUST both be set equal to this
+new state (i.e., up(4)).  The two instances of
+bfdSessDiag in this notification indicate the range
+of indexes that are affected.  Note that all the indexes
+of the two ends of the range can be derived from the
+instance identifiers of these two objects.  For the
+cases where a contiguous range of sessions
+have transitioned into the up(4) state at roughly
+the same time, the device SHOULD issue a single
+notification for each range of contiguous indexes in
+an effort to minimize the emission of a large number
+of notifications.  If a notification has to be
+issued for just a single bfdSessEntry, then
+the instance identifier (and values) of the two
+bfdSessDiag objects MUST be identical.""",
+        }, # notification
+        "bfdSessDown" : {
+            "nodetype" : "notification",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.0.2",
+            "status" : "current",
+            "objects" : {
+                "bfdSessDiag" : {
+                    "nodetype" : "object",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessDiag" : {
+                    "nodetype" : "object",
+                    "module" : "BFD-STD-MIB"
+                },
+            },
+            "description" :
+                """This notification is generated when the
+bfdSessState object for one or more contiguous
+entries in bfdSessTable are about to enter the down(2)
+or adminDown(1) states from some other state.  The included
+values of bfdSessDiag MUST both be set equal to this new
+state (i.e., down(2) or adminDown(1)).  The two instances
+of bfdSessDiag in this notification indicate the range
+of indexes that are affected.  Note that all the indexes
+of the two ends of the range can be derived from the
+instance identifiers of these two objects.  For
+cases where a contiguous range of sessions
+have transitioned into the down(2) or adminDown(1) states
+at roughly the same time, the device SHOULD issue a single
+notification for each range of contiguous indexes in
+an effort to minimize the emission of a large number
+of notifications.  If a notification has to be
+issued for just a single bfdSessEntry, then
+the instance identifier (and values) of the two
+bfdSessDiag objects MUST be identical.""",
+        }, # notification
+    }, # notifications
+
+    "groups" : {
+        "bfdSessionGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.2.1.1",
+            "status" : "current",
+            "members" : {
+                "bfdAdminStatus" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdOperStatus" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdNotificationsEnable" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessVersionNumber" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessType" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessIndexNext" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessDiscriminator" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessDestinationUdpPort" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessSourceUdpPort" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessEchoSourceUdpPort" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessAdminStatus" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessOperStatus" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessOperMode" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessDemandModeDesiredFlag" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessControlPlaneIndepFlag" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessMultipointFlag" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessInterface" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessSrcAddrType" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessSrcAddr" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessDstAddrType" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessDstAddr" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessGTSM" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessGTSMTTL" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessDesiredMinTxInterval" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessReqMinRxInterval" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessReqMinEchoRxInterval" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessDetectMult" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessAuthPresFlag" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessAuthenticationType" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessAuthenticationKeyID" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessAuthenticationKey" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Collection of objects needed for BFD sessions.""",
+        }, # group
+        "bfdSessionReadOnlyGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.2.1.2",
+            "status" : "current",
+            "members" : {
+                "bfdSessRemoteDiscr" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessState" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessRemoteHeardFlag" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessDiag" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessNegotiatedInterval" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessNegotiatedEchoInterval" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessNegotiatedDetectMult" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessDiscMapIndex" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessIpMapIndex" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Collection of read-only objects needed for BFD sessions.""",
+        }, # group
+        "bfdSessionPerfGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.2.1.3",
+            "status" : "current",
+            "members" : {
+                "bfdSessPerfCtrlPktIn" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessPerfCtrlPktOut" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessPerfCtrlPktDrop" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessPerfCtrlPktDropLastTime" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessPerfEchoPktIn" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessPerfEchoPktOut" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessPerfEchoPktDrop" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessPerfEchoPktDropLastTime" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessUpTime" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessPerfLastSessDownTime" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessPerfLastCommLostDiag" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessPerfSessUpCount" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessPerfDiscTime" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Collection of objects needed to monitor the
+performance of BFD sessions.""",
+        }, # group
+        "bfdSessionPerfHCGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.2.1.4",
+            "status" : "current",
+            "members" : {
+                "bfdSessPerfCtrlPktInHC" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessPerfCtrlPktOutHC" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessPerfCtrlPktDropHC" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessPerfEchoPktInHC" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessPerfEchoPktOutHC" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessPerfEchoPktDropHC" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Collection of objects needed to monitor the
+performance of BFD sessions for which the
+values of bfdSessPerfPktIn and bfdSessPerfPktOut
+wrap around too quickly.""",
+        }, # group
+        "bfdNotificationGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.2.1.5",
+            "status" : "current",
+            "members" : {
+                "bfdSessUp" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessDown" : {
+                    "nodetype" : "member",
+                    "module" : "BFD-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Set of notifications implemented in this
+module.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "bfdModuleFullCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.2.2.1",
+            "status" : "current",
+            "description" :
+                """Compliance statement for agents that provide full
+support for the BFD-MIB module.  Such devices can
+then be monitored and also be configured using
+this MIB module.""",
+            "requires" : {
+                "bfdSessionGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessionReadOnlyGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessionPerfGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdNotificationGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessionPerfHCGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "BFD-STD-MIB",
+                    "description" :
+                        """This group is mandatory for all systems that
+are able to support the Counter64 date type.""",
+                },
+            }, # requires
+            "refinements" : {
+                "bfdSessSrcAddrType" : {
+                    "module" : "BFD-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddressType",
+                            },
+                            "unknown" : {
+                                "nodetype" : "namednumber",
+                                "number" : "0"
+                            },
+                            "ipv4" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "ipv6" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                            "ipv6z" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """Only unknown(0), ipv4(1), ipv6(2), and ipv6z(4)
+support are required. ipv4z(3) is not required,
+and dns(16) is not allowed.""",
+                },
+                "bfdSessSrcAddr" : {
+                    "module" : "BFD-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "OctetString",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddress",
+                            },
+                            "ranges" : [
+                            {
+                                "min" : "0",
+                                "max" : "0"
+                            },
+                            {
+                                "min" : "4",
+                                "max" : "4"
+                            },
+                            {
+                                "min" : "16",
+                                "max" : "16"
+                            },
+                            {
+                                "min" : "20",
+                                "max" : "20"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "0",
+                                "max" : "20"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """An implementation is only required to support
+unknown(0), ipv4(1), ipv6(2), and ipv6z(4) sizes.""",
+                },
+                "bfdSessDstAddrType" : {
+                    "module" : "BFD-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddressType",
+                            },
+                            "unknown" : {
+                                "nodetype" : "namednumber",
+                                "number" : "0"
+                            },
+                            "ipv4" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "ipv6" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                            "ipv6z" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """Only unknown(0), ipv4(1), ipv6(2), and ipv6z(4)
+support are required. ipv4z(3) is not required,
+and dns(16) is not allowed.""",
+                },
+                "bfdSessDstAddr" : {
+                    "module" : "BFD-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "OctetString",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddress",
+                            },
+                            "ranges" : [
+                            {
+                                "min" : "0",
+                                "max" : "0"
+                            },
+                            {
+                                "min" : "4",
+                                "max" : "4"
+                            },
+                            {
+                                "min" : "16",
+                                "max" : "16"
+                            },
+                            {
+                                "min" : "20",
+                                "max" : "20"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "0",
+                                "max" : "20"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """An implementation is only required to support
+unknown(0), ipv4(1), ipv6(2), and ipv6z(4) sizes.""",
+                },
+                "bfdSessRowStatus" : {
+                    "module" : "BFD-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "notInService" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "writesyntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "notInService" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                            "createAndGo" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                            "destroy" : {
+                                "nodetype" : "namednumber",
+                                "number" : "6"
+                            },
+                        },
+                    }, # writesyntax
+                    "description" :
+                        """Support for createAndWait and notReady is not
+required.""",
+                },
+            }, # refinements
+
+        }, # compliance
+        "bfdModuleReadOnlyCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "BFD-STD-MIB",
+            "oid" : "1.3.6.1.2.1.222.2.2.2",
+            "status" : "current",
+            "description" :
+                """Compliance requirement for implementations that only
+provide read-only support for BFD-MIB.  Such devices
+can then be monitored but cannot be configured using
+this MIB module.""",
+            "requires" : {
+                "bfdSessionGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessionReadOnlyGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessionPerfGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdNotificationGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "BFD-STD-MIB"
+                },
+                "bfdSessionPerfHCGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "BFD-STD-MIB",
+                    "description" :
+                        """This group is mandatory for all systems that
+are able to support the Counter64 date type.""",
+                },
+            }, # requires
+            "refinements" : {
+                "bfdSessVersionNumber" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessType" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessDiscriminator" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessDestinationUdpPort" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessSourceUdpPort" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessEchoSourceUdpPort" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessAdminStatus" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessOperMode" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessDemandModeDesiredFlag" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessControlPlaneIndepFlag" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessMultipointFlag" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessInterface" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessSrcAddrType" : {
+                    "module" : "BFD-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddressType",
+                            },
+                            "unknown" : {
+                                "nodetype" : "namednumber",
+                                "number" : "0"
+                            },
+                            "ipv4" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "ipv6" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                            "ipv6z" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Only unknown(0), ipv4(1), ipv6(2), and ipv6z(4)
+support are required. ipv4z(3) is not required,
+and dns(16) is not allowed.""",
+                },
+                "bfdSessSrcAddr" : {
+                    "module" : "BFD-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "OctetString",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddress",
+                            },
+                            "ranges" : [
+                            {
+                                "min" : "0",
+                                "max" : "0"
+                            },
+                            {
+                                "min" : "4",
+                                "max" : "4"
+                            },
+                            {
+                                "min" : "16",
+                                "max" : "16"
+                            },
+                            {
+                                "min" : "20",
+                                "max" : "20"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "0",
+                                "max" : "20"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """An implementation is only required to support
+unknown(0), ipv4(1), ipv6(2), and ipv6z(4) sizes.""",
+                },
+                "bfdSessDstAddrType" : {
+                    "module" : "BFD-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddressType",
+                            },
+                            "unknown" : {
+                                "nodetype" : "namednumber",
+                                "number" : "0"
+                            },
+                            "ipv4" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "ipv6" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                            "ipv6z" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Only unknown(0), ipv4(1), ipv6(2), and ipv6z(4)
+support are required. ipv4z(3) is not required,
+and dns(16) is not allowed.""",
+                },
+                "bfdSessDstAddr" : {
+                    "module" : "BFD-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "OctetString",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddress",
+                            },
+                            "ranges" : [
+                            {
+                                "min" : "0",
+                                "max" : "0"
+                            },
+                            {
+                                "min" : "4",
+                                "max" : "4"
+                            },
+                            {
+                                "min" : "16",
+                                "max" : "16"
+                            },
+                            {
+                                "min" : "20",
+                                "max" : "20"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "0",
+                                "max" : "20"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """An implementation is only required to support
+unknown(0), ipv4(1), ipv6(2), and ipv6z(4) sizes.""",
+                },
+                "bfdSessGTSM" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessGTSMTTL" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessDesiredMinTxInterval" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessReqMinRxInterval" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessReqMinEchoRxInterval" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessDetectMult" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessAuthPresFlag" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessAuthenticationType" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessAuthenticationKeyID" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessAuthenticationKey" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessStorageType" : {
+                    "module" : "BFD-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "bfdSessRowStatus" : {
+                    "module" : "BFD-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+            }, # refinements
+
+        }, # compliance
+    }, # compliances
+
+}