logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/SNMP-PROXY-MIB.dic

@@ -0,0 +1,414 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python SNMP-PROXY-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/SNMP-PROXY-MIB"
+
+MIB = {
+    "moduleName" : "SNMP-PROXY-MIB",
+
+    "SNMP-PROXY-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF SNMPv3 Working Group""",
+        "contact" : 
+            """WG-email:   snmpv3@lists.tislabs.com
+Subscribe:  majordomo@lists.tislabs.com
+            In message body:  subscribe snmpv3
+
+Co-Chair:   Russ Mundy
+            Network Associates Laboratories
+Postal:     15204 Omega Drive, Suite 300
+            Rockville, MD 20850-4601
+            USA
+EMail:      mundy@tislabs.com
+Phone:      +1 301-947-7107
+
+
+Co-Chair:   David Harrington
+            Enterasys Networks
+Postal:     35 Industrial Way
+            P. O. Box 5004
+            Rochester, New Hampshire 03866-5005
+            USA
+EMail:      dbh@enterasys.com
+Phone:      +1 603-337-2614
+
+Co-editor:  David B. Levi
+            Nortel Networks
+Postal:     3505 Kesterwood Drive
+            Knoxville, Tennessee 37918
+EMail:      dlevi@nortelnetworks.com
+Phone:      +1 865 686 0432
+
+Co-editor:  Paul Meyer
+            Secure Computing Corporation
+Postal:     2675 Long Lake Road
+            Roseville, Minnesota 55113
+EMail:      paul_meyer@securecomputing.com
+Phone:      +1 651 628 1592
+
+Co-editor:  Bob Stewart
+            Retired""",
+        "description" :
+            """This MIB module defines MIB objects which provide
+mechanisms to remotely configure the parameters
+used by a proxy forwarding application.
+
+Copyright (C) The Internet Society (2002). This
+version of this MIB module is part of RFC 3413;
+see the RFC itself for full legal notices.""",
+        "revisions" : (
+            {
+                "date" : "2002-10-14 00:00",
+                "description" :
+                    """Clarifications, published as
+RFC 3413.""",
+            },
+            {
+                "date" : "1998-08-04 00:00",
+                "description" :
+                    """Clarifications, published as
+RFC 2573.""",
+            },
+            {
+                "date" : "1997-07-14 00:00",
+                "description" :
+                    """The initial revision, published as RFC2273.""",
+            },
+        ),
+        "identity node" : "snmpProxyMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "snmpModules"},
+        {"module" : "SNMPv2-TC", "name" : "RowStatus"},
+        {"module" : "SNMPv2-TC", "name" : "StorageType"},
+        {"module" : "SNMP-FRAMEWORK-MIB", "name" : "SnmpEngineID"},
+        {"module" : "SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+        {"module" : "SNMP-TARGET-MIB", "name" : "SnmpTagValue"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "SNMP-TARGET-MIB", "name" : "snmpTargetBasicGroup"},
+        {"module" : "SNMP-TARGET-MIB", "name" : "snmpTargetResponseGroup"},
+    ),
+
+    "nodes" : {
+        "snmpProxyMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-PROXY-MIB",
+            "oid" : "1.3.6.1.6.3.14",
+            "status" : "current",
+        }, # node
+        "snmpProxyObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-PROXY-MIB",
+            "oid" : "1.3.6.1.6.3.14.1",
+        }, # node
+        "snmpProxyTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SNMP-PROXY-MIB",
+            "oid" : "1.3.6.1.6.3.14.1.2",
+            "status" : "current",
+            "description" :
+                """The table of translation parameters used by proxy forwarder
+applications for forwarding SNMP messages.""",
+        }, # table
+        "snmpProxyEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SNMP-PROXY-MIB",
+            "oid" : "1.3.6.1.6.3.14.1.2.1",
+            "create" : "true",
+            "status" : "current",
+            "implied" : "true",
+            "linkage" : [
+                "snmpProxyName",
+            ],
+            "description" :
+                """A set of translation parameters used by a proxy forwarder
+application for forwarding SNMP messages.
+
+Entries in the snmpProxyTable are created and deleted
+using the snmpProxyRowStatus object.""",
+        }, # row
+        "snmpProxyName" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-PROXY-MIB",
+            "oid" : "1.3.6.1.6.3.14.1.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMP-FRAMEWORK-MIB",
+                        "type" : "SnmpAdminString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """The locally arbitrary, but unique identifier associated
+with this snmpProxyEntry.""",
+        }, # column
+        "snmpProxyType" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-PROXY-MIB",
+            "oid" : "1.3.6.1.6.3.14.1.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "read" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "write" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "trap" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "inform" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The type of message that may be forwarded using
+the translation parameters defined by this entry.""",
+        }, # column
+        "snmpProxyContextEngineID" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-PROXY-MIB",
+            "oid" : "1.3.6.1.6.3.14.1.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMP-FRAMEWORK-MIB", "name" : "SnmpEngineID"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The contextEngineID contained in messages that
+may be forwarded using the translation parameters
+defined by this entry.""",
+        }, # column
+        "snmpProxyContextName" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-PROXY-MIB",
+            "oid" : "1.3.6.1.6.3.14.1.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The contextName contained in messages that may be
+forwarded using the translation parameters defined
+by this entry.
+
+This object is optional, and if not supported, the
+contextName contained in a message is ignored when
+selecting an entry in the snmpProxyTable.""",
+        }, # column
+        "snmpProxyTargetParamsIn" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-PROXY-MIB",
+            "oid" : "1.3.6.1.6.3.14.1.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object selects an entry in the snmpTargetParamsTable.
+The selected entry is used to determine which row of the
+snmpProxyTable to use for forwarding received messages.""",
+        }, # column
+        "snmpProxySingleTargetOut" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-PROXY-MIB",
+            "oid" : "1.3.6.1.6.3.14.1.2.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object selects a management target defined in the
+snmpTargetAddrTable (in the SNMP-TARGET-MIB).  The
+selected target is defined by an entry in the
+snmpTargetAddrTable whose index value (snmpTargetAddrName)
+is equal to this object.
+
+This object is only used when selection of a single
+target is required (i.e. when forwarding an incoming
+read or write request).""",
+        }, # column
+        "snmpProxyMultipleTargetOut" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-PROXY-MIB",
+            "oid" : "1.3.6.1.6.3.14.1.2.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMP-TARGET-MIB", "name" : "SnmpTagValue"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object selects a set of management targets defined
+in the snmpTargetAddrTable (in the SNMP-TARGET-MIB).
+
+This object is only used when selection of multiple
+targets is required (i.e. when forwarding an incoming
+notification).""",
+        }, # column
+        "snmpProxyStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-PROXY-MIB",
+            "oid" : "1.3.6.1.6.3.14.1.2.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "default" : "nonVolatile",
+            "description" :
+                """The storage type of this conceptual row.
+Conceptual rows having the value 'permanent' need not
+allow write-access to any columnar objects in the row.""",
+        }, # column
+        "snmpProxyRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-PROXY-MIB",
+            "oid" : "1.3.6.1.6.3.14.1.2.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The status of this conceptual row.
+
+To create a row in this table, a manager must
+
+
+set this object to either createAndGo(4) or
+createAndWait(5).
+
+The following objects may not be modified while the
+value of this object is active(1):
+    - snmpProxyType
+    - snmpProxyContextEngineID
+    - snmpProxyContextName
+    - snmpProxyTargetParamsIn
+    - snmpProxySingleTargetOut
+    - snmpProxyMultipleTargetOut""",
+        }, # column
+        "snmpProxyConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-PROXY-MIB",
+            "oid" : "1.3.6.1.6.3.14.3",
+        }, # node
+        "snmpProxyCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-PROXY-MIB",
+            "oid" : "1.3.6.1.6.3.14.3.1",
+        }, # node
+        "snmpProxyGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-PROXY-MIB",
+            "oid" : "1.3.6.1.6.3.14.3.2",
+        }, # node
+    }, # nodes
+
+    "groups" : {
+        "snmpProxyGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "SNMP-PROXY-MIB",
+            "oid" : "1.3.6.1.6.3.14.3.2.3",
+            "status" : "current",
+            "members" : {
+                "snmpProxyType" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-PROXY-MIB"
+                },
+                "snmpProxyContextEngineID" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-PROXY-MIB"
+                },
+                "snmpProxyContextName" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-PROXY-MIB"
+                },
+                "snmpProxyTargetParamsIn" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-PROXY-MIB"
+                },
+                "snmpProxySingleTargetOut" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-PROXY-MIB"
+                },
+                "snmpProxyMultipleTargetOut" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-PROXY-MIB"
+                },
+                "snmpProxyStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-PROXY-MIB"
+                },
+                "snmpProxyRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-PROXY-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing remote configuration of
+management target translation parameters for use by
+proxy forwarder applications.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "snmpProxyCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "SNMP-PROXY-MIB",
+            "oid" : "1.3.6.1.6.3.14.3.1.1",
+            "status" : "current",
+            "description" :
+                """The compliance statement for SNMP entities which include
+a proxy forwarding application.""",
+            "requires" : {
+                "snmpTargetBasicGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "SNMP-TARGET-MIB"
+                },
+                "snmpTargetResponseGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "SNMP-TARGET-MIB"
+                },
+                "snmpProxyGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "SNMP-PROXY-MIB"
+                },
+            }, # requires
+        }, # compliance
+    }, # compliances
+
+}

data/lib/mibs/ietf/SNMP-REPEATER-MIB.dic

@@ -0,0 +1,4335 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python SNMP-REPEATER-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/SNMP-REPEATER-MIB"
+
+MIB = {
+    "moduleName" : "SNMP-REPEATER-MIB",
+
+    "SNMP-REPEATER-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF HUB MIB Working Group""",
+        "contact" : 
+            """WG E-mail: hubmib@hprnd.rose.hp.com
+
+Chair: Dan Romascanu
+Postal: Madge Networks (Israel) Ltd.
+       Atidim Technology Park, Bldg. 3
+       Tel Aviv 61131, Israel
+  Tel: 972-3-6458414, 6458458
+  Fax: 972-3-6487146
+E-mail: dromasca@madge.com
+
+Editor: Kathryn de Graaf
+Postal: 3Com Corporation
+       118 Turnpike Rd.
+       Southborough, MA 01772 USA
+  Tel: (508)229-1627
+  Fax: (508)490-5882
+E-mail: kdegraaf@isd.3com.com""",
+        "description" :
+            """Management information for 802.3 repeaters.
+
+The following references are used throughout
+this MIB module:
+
+[IEEE 802.3 Std]
+    refers to IEEE 802.3/ISO 8802-3 Information
+    processing systems - Local area networks -
+    Part 3: Carrier sense multiple access with
+    collision detection (CSMA/CD) access method
+    and physical layer specifications (1993).
+
+[IEEE 802.3 Mgt]
+    refers to IEEE 802.3u-1995, '10 Mb/s &
+    100 Mb/s Management, Section 30,'
+    Supplement to ANSI/IEEE 802.3.
+
+The following terms are used throughout this
+MIB module.  For complete formal definitions,
+the IEEE 802.3 standards should be consulted
+wherever possible:
+
+System - A managed entity compliant with this
+MIB, and incorporating at least one managed
+802.3 repeater.
+
+Chassis - An enclosure for one managed repeater,
+part of a managed repeater, or several managed
+repeaters.  It typically contains an integral
+power supply and a variable number of available
+module slots.
+
+Repeater-unit - The portion of the repeater set
+that is inboard of the physical media interfaces.
+The physical media interfaces (MAUs, AUIs) may be
+physically separated from the repeater-unit, or
+they may be integrated into the same physical
+package.
+
+Trivial repeater-unit - An isolated port that can
+gather statistics.
+
+Group - A recommended, but optional, entity
+defined by the IEEE 802.3 management standard,
+in order to support a modular numbering scheme.
+The classical example allows an implementor to
+represent field-replaceable units as groups of
+ports, with the port numbering matching the
+modular hardware implementation.
+
+System interconnect segment - An internal
+segment allowing interconnection of ports
+belonging to different physical entities
+into the same logical manageable repeater.
+Examples of implementation might be
+backplane busses in modular hubs, or
+chaining cables in stacks of hubs.
+Stack - A scalable system that may include
+managed repeaters, in which modularity is
+achieved by interconnecting a number of
+different chassis.
+
+Module - A building block in a modular
+chassis.  It typically maps into one 'slot';
+however, the range of configurations may be
+very large, with several modules entering
+one slot, or one module covering several
+slots.""",
+        "revisions" : (
+            {
+                "date" : "1996-09-14 00:00",
+                "description" :
+                    """[Revision added by libsmi due to a LAST-UPDATED clause.]""",
+            },
+            {
+                "date" : "1993-09-01 00:00",
+                "description" :
+                    """Published as RFC 1516""",
+            },
+            {
+                "date" : "1992-10-01 00:00",
+                "description" :
+                    """Published as RFC 1368""",
+            },
+        ),
+        "identity node" : "snmpRptrMod",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "Counter32"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter64"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "SNMPv2-SMI", "name" : "Gauge32"},
+        {"module" : "SNMPv2-SMI", "name" : "TimeTicks"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "NOTIFICATION-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "mib-2"},
+        {"module" : "SNMPv2-TC", "name" : "TimeStamp"},
+        {"module" : "SNMPv2-TC", "name" : "DisplayString"},
+        {"module" : "SNMPv2-TC", "name" : "MacAddress"},
+        {"module" : "SNMPv2-TC", "name" : "TEXTUAL-CONVENTION"},
+        {"module" : "SNMPv2-TC", "name" : "RowStatus"},
+        {"module" : "SNMPv2-TC", "name" : "TestAndIncr"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "IF-MIB", "name" : "OwnerString"},
+    ),
+
+    "typedefs" : {
+        "OptMacAddr" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "0"
+            },
+            {
+                "min" : "6",
+                "max" : "6"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "6"
+            },
+            "format" : "1x:",
+            "description" :
+                """Either a 6 octet address in the `canonical'
+order defined by IEEE 802.1a, i.e., as if it
+were transmitted least significant bit first
+if a value is available or a zero length string.""",
+            "reference" :
+                """See MacAddress in SNMPv2-TC. The only difference
+is that a zero length string is allowed as a value
+for OptMacAddr and not for MacAddress.""",
+        },
+    }, # typedefs
+
+    "nodes" : {
+        "snmpDot3RptrMgt" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22",
+        }, # node
+        "rptrBasicPackage" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1",
+        }, # node
+        "rptrRptrInfo" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.1",
+        }, # node
+        "rptrGroupCapacity" : {
+            "nodetype" : "scalar",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.1.1",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """********* THIS OBJECT IS DEPRECATED **********
+
+The rptrGroupCapacity is the number of groups
+that can be contained within the repeater.  Within
+each managed repeater, the groups are uniquely
+numbered in the range from 1 to rptrGroupCapacity.
+
+Some groups may not be present in the repeater, in
+which case the actual number of groups present
+will be less than rptrGroupCapacity.  The number
+of groups present will never be greater than
+rptrGroupCapacity.
+
+Note:  In practice, this will generally be the
+number of field-replaceable units (i.e., modules,
+cards, or boards) that can fit in the physical
+repeater enclosure, and the group numbers will
+correspond to numbers marked on the physical
+enclosure.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.1.1.3,
+aRepeaterGroupCapacity.""",
+        }, # scalar
+        "rptrOperStatus" : {
+            "nodetype" : "scalar",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.1.2",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "other" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "ok" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "rptrFailure" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "groupFailure" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "portFailure" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "generalFailure" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """********* THIS OBJECT IS DEPRECATED **********
+
+The rptrOperStatus object indicates the
+operational state of the repeater.  The
+rptrHealthText object may be consulted for more
+specific information about the state of the
+repeater's health.
+
+In the case of multiple kinds of failures (e.g.,
+repeater failure and port failure), the value of
+this attribute shall reflect the highest priority
+failure in the following order, listed highest
+priority first:
+
+    rptrFailure(3)
+    groupFailure(4)
+    portFailure(5)
+    generalFailure(6).""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.1.1.5, aRepeaterHealthState.""",
+        }, # scalar
+        "rptrHealthText" : {
+            "nodetype" : "scalar",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.1.3",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMPv2-TC",
+                        "type" : "DisplayString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """********* THIS OBJECT IS DEPRECATED **********
+
+The health text object is a text string that
+provides information relevant to the operational
+state of the repeater.  Agents may use this string
+to provide detailed information on current
+failures, including how they were detected, and/or
+instructions for problem resolution.  The contents
+are agent-specific.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.1.1.6, aRepeaterHealthText.""",
+        }, # scalar
+        "rptrReset" : {
+            "nodetype" : "scalar",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.1.4",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "noReset" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "reset" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """********* THIS OBJECT IS DEPRECATED **********
+
+Setting this object to reset(2) causes a
+transition to the START state of Fig 9-2 in
+section 9 [IEEE 802.3 Std] for a 10Mb/s repeater,
+and the START state of Fig 27-2 in section 27
+of that standard for a 100Mb/s repeater.
+
+Setting this object to noReset(1) has no effect.
+The agent will always return the value noReset(1)
+when this object is read.
+
+After receiving a request to set this variable to
+reset(2), the agent is allowed to delay the reset
+for a short period.  For example, the implementor
+may choose to delay the reset long enough to allow
+the SNMP response to be transmitted.  In any
+event, the SNMP response must be transmitted.
+
+This action does not reset the management counters
+defined in this document nor does it affect the
+portAdminStatus parameters.  Included in this
+action is the execution of a disruptive Self-Test
+with the following characteristics:  a) The nature
+of the tests is not specified.  b) The test resets
+the repeater but without affecting management
+information about the repeater.  c) The test does
+not inject packets onto any segment.  d) Packets
+received during the test may or may not be
+transferred.  e) The test does not interfere with
+management functions.
+
+After performing this self-test, the agent will
+update the repeater health information (including
+rptrOperStatus and rptrHealthText), and send a
+rptrHealth trap.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.1.2.1, acResetRepeater.""",
+        }, # scalar
+        "rptrNonDisruptTest" : {
+            "nodetype" : "scalar",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.1.5",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "noSelfTest" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "selfTest" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """********* THIS OBJECT IS DEPRECATED **********
+
+Setting this object to selfTest(2) causes the
+repeater to perform a agent-specific, non-
+disruptive self-test that has the following
+characteristics:  a) The nature of the tests is
+not specified.  b) The test does not change the
+state of the repeater or management information
+about the repeater.  c) The test does not inject
+packets onto any segment.  d) The test does not
+prevent the relay of any packets.  e) The test
+does not interfere with management functions.
+
+After performing this test, the agent will update
+the repeater health information (including
+rptrOperStatus and rptrHealthText) and send a
+rptrHealth trap.
+
+Note that this definition allows returning an
+'okay' result after doing a trivial test.
+
+Setting this object to noSelfTest(1) has no
+effect.  The agent will always return the value
+noSelfTest(1) when this object is read.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.1.2.2,
+acExecuteNonDisruptiveSelfTest.""",
+        }, # scalar
+        "rptrTotalPartitionedPorts" : {
+            "nodetype" : "scalar",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.1.6",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Gauge32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """********* THIS OBJECT IS DEPRECATED **********
+
+This object returns the total number of ports in
+the repeater whose current state meets all three
+of the following criteria:  rptrPortOperStatus
+does not have the value notPresent(3),
+rptrPortAdminStatus is enabled(1), and
+rptrPortAutoPartitionState is autoPartitioned(2).""",
+        }, # scalar
+        "rptrGroupInfo" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.2",
+        }, # node
+        "rptrGroupTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.2.1",
+            "status" : "current",
+            "description" :
+                """Table of descriptive and status information about
+the groups of ports.""",
+        }, # table
+        "rptrGroupEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.2.1.1",
+            "status" : "current",
+            "linkage" : [
+                "rptrGroupIndex",
+            ],
+            "description" :
+                """An entry in the table, containing information
+about a single group of ports.""",
+        }, # row
+        "rptrGroupIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.2.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object identifies the group within the
+system for which this entry contains
+information.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.2.1.1, aGroupID.""",
+        }, # column
+        "rptrGroupDescr" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.2.1.1.2",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMPv2-TC",
+                        "type" : "DisplayString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """********* THIS OBJECT IS DEPRECATED **********
+
+A textual description of the group.  This value
+should include the full name and version
+identification of the group's hardware type and
+indicate how the group is differentiated from
+other types of groups in the repeater.  Plug-in
+Module, Rev A' or 'Barney Rubble 10BASE-T 4-port
+SIMM socket Version 2.1' are examples of valid
+group descriptions.
+
+It is mandatory that this only contain printable
+ASCII characters.""",
+        }, # column
+        "rptrGroupObjectID" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.2.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "ObjectIdentifier"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The vendor's authoritative identification of the
+group.  This value may be allocated within the SMI
+enterprises subtree (1.3.6.1.4.1) and provides a
+straight-forward and unambiguous means for
+determining what kind of group is being managed.
+
+For example, this object could take the value
+1.3.6.1.4.1.4242.1.2.14 if vendor 'Flintstones,
+Inc.' was assigned the subtree 1.3.6.1.4.1.4242,
+and had assigned the identifier
+1.3.6.1.4.1.4242.1.2.14 to its 'Wilma Flintstone
+6-Port FOIRL Plug-in Module.'""",
+        }, # column
+        "rptrGroupOperStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.2.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "other" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "operational" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "malfunctioning" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "notPresent" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "underTest" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "resetInProgress" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """An object that indicates the operational status
+of the group.
+
+A status of notPresent(4) indicates that the group
+is temporarily or permanently physically and/or
+logically not a part of the repeater.  It is an
+implementation-specific matter as to whether the
+agent effectively removes notPresent entries from
+the table.
+
+A status of operational(2) indicates that the
+group is functioning, and a status of
+malfunctioning(3) indicates that the group is
+malfunctioning in some way.""",
+        }, # column
+        "rptrGroupLastOperStatusChange" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.2.1.1.5",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "TimeTicks"},
+            },
+            "access" : "readonly",
+            "description" :
+                """********* THIS OBJECT IS DEPRECATED **********
+
+An object that contains the value of sysUpTime at
+the time when the last of the following occurred:
+  1) the agent cold- or warm-started;
+  2) the row for the group was created (such
+     as when the group was added to the system); or
+  3) the value of rptrGroupOperStatus for the
+     group changed.
+
+A value of zero indicates that the group's
+operational status has not changed since the agent
+last restarted.""",
+        }, # column
+        "rptrGroupPortCapacity" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.2.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The rptrGroupPortCapacity is the number of ports
+that can be contained within the group.  Valid
+range is 1-2147483647.  Within each group, the
+ports are uniquely numbered in the range from 1 to
+rptrGroupPortCapacity.
+
+Some ports may not be present in the system, in
+which case the actual number of ports present
+will be less than the value of rptrGroupPortCapacity.
+The number of ports present in the group will never
+be greater than the value of rptrGroupPortCapacity.
+
+Note:  In practice, this will generally be the
+number of ports on a module, card, or board, and
+the port numbers will correspond to numbers marked
+on the physical embodiment.""",
+            "reference" :
+                """IEEE 802.3 Mgt, 30.4.2.1.2, aGroupPortCapacity.""",
+        }, # column
+        "rptrPortInfo" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.3",
+        }, # node
+        "rptrPortTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.3.1",
+            "status" : "current",
+            "description" :
+                """Table of descriptive and status information about
+the repeater ports in the system.  The number of
+entries is independent of the number of repeaters
+in the managed system.""",
+        }, # table
+        "rptrPortEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.3.1.1",
+            "status" : "current",
+            "linkage" : [
+                "rptrPortGroupIndex",
+                "rptrPortIndex",
+            ],
+            "description" :
+                """An entry in the table, containing information
+about a single port.""",
+        }, # row
+        "rptrPortGroupIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.3.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object identifies the group containing the
+port for which this entry contains information.""",
+        }, # column
+        "rptrPortIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.3.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object identifies the port within the group
+for which this entry contains information.  This
+identifies the port independently from the repeater
+it may be attached to.  The numbering scheme for
+ports is implementation specific; however, this
+value can never be greater than
+rptrGroupPortCapacity for the associated group.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.1, aPortID.""",
+        }, # column
+        "rptrPortAdminStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.3.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "enabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "disabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """Setting this object to disabled(2) disables the
+port.  A disabled port neither transmits nor
+receives.  Once disabled, a port must be
+explicitly enabled to restore operation.  A port
+which is disabled when power is lost or when a
+reset is exerted shall remain disabled when normal
+operation resumes.
+
+The admin status takes precedence over auto-
+partition and functionally operates between the
+auto-partition mechanism and the AUI/PMA.
+
+Setting this object to enabled(1) enables the port
+and exerts a BEGIN on the port's auto-partition
+state machine.
+
+(In effect, when a port is disabled, the value of
+rptrPortAutoPartitionState for that port is frozen
+until the port is next enabled.  When the port
+becomes enabled, the rptrPortAutoPartitionState
+becomes notAutoPartitioned(1), regardless of its
+pre-disabling state.)""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.2, aPortAdminState
+and 30.4.3.2.1, acPortAdminControl.""",
+        }, # column
+        "rptrPortAutoPartitionState" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.3.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "notAutoPartitioned" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "autoPartitioned" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The autoPartitionState flag indicates whether the
+port is currently partitioned by the repeater's
+auto-partition protection.
+
+The conditions that cause port partitioning are
+specified in partition state machine in Sections
+9 and 27 of [IEEE 802.3 Std].  They are not
+differentiated here.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.3, aAutoPartitionState.""",
+        }, # column
+        "rptrPortOperStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.3.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "operational" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "notOperational" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "notPresent" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object indicates the port's operational
+status.  The notPresent(3) status indicates the
+port is physically removed (note this may or may
+not be possible depending on the type of port.)
+The operational(1) status indicates that the port
+is enabled (see rptrPortAdminStatus) and working,
+even though it might be auto-partitioned (see
+rptrPortAutoPartitionState).
+
+If this object has the value operational(1) and
+rptrPortAdminStatus is set to disabled(2), it is
+expected that this object's value will soon change
+to notOperational(2).""",
+        }, # column
+        "rptrPortRptrId" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.3.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object identifies the repeater to
+which this port belongs.  The repeater
+identified by a particular value of this object
+is the same as that identified by the same
+value of rptrInfoId.  A value of zero
+indicates that this port currently is not
+a member of any repeater.""",
+        }, # column
+        "rptrAllRptrInfo" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.4",
+        }, # node
+        "rptrInfoTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.4.1",
+            "status" : "current",
+            "description" :
+                """A table of information about each
+non-trivial repeater. The number of entries
+depends on the physical configuration of the
+managed system.""",
+        }, # table
+        "rptrInfoEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.4.1.1",
+            "status" : "current",
+            "linkage" : [
+                "rptrInfoId",
+            ],
+            "description" :
+                """An entry in the table, containing information
+about a single non-trivial repeater.""",
+        }, # row
+        "rptrInfoId" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.4.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object identifies the repeater for which
+this entry contains information.""",
+        }, # column
+        "rptrInfoRptrType" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.4.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "other" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "tenMb" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "onehundredMbClassI" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "onehundredMbClassII" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The rptrInfoRptrType returns a value that identifies
+the CSMA/CD repeater type.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.1.1.2, aRepeaterType.""",
+        }, # column
+        "rptrInfoOperStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.4.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "other" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "ok" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "failure" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The rptrInfoOperStatus object indicates the
+operational state of the repeater.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.1.1.5, aRepeaterHealthState.""",
+        }, # column
+        "rptrInfoReset" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.4.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "noReset" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "reset" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """Setting this object to reset(2) causes a
+transition to the START state of Fig 9-2 in
+section 9 [IEEE 802.3 Std] for a 10Mb/s repeater,
+and to the START state of Fig 27-2 in section 27
+of that standard for a 100Mb/s repeater.
+
+Setting this object to noReset(1) has no effect.
+The agent will always return the value noReset(1)
+when this object is read.
+
+After receiving a request to set this variable to
+reset(2), the agent is allowed to delay the reset
+for a short period.  For example, the implementor
+may choose to delay the reset long enough to allow
+the SNMP response to be transmitted.  In any
+event, the SNMP response must be transmitted.
+
+This action does not reset the management counters
+defined in this document nor does it affect the
+portAdminStatus parameters.  Included in this
+action is the execution of a disruptive Self-Test
+with the following characteristics:  a) The nature
+of the tests is not specified.  b) The test resets
+the repeater but without affecting management
+information about the repeater.  c) The test does
+not inject packets onto any segment.  d) Packets
+received during the test may or may not be
+transferred.  e) The test does not interfere with
+management functions.
+
+After performing this self-test, the agent will
+update the repeater health information (including
+rptrInfoOperStatus), and send a rptrInfoResetEvent
+notification.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.1.2.1, acResetRepeater.""",
+        }, # column
+        "rptrInfoPartitionedPorts" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.4.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Gauge32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object returns the total number of ports in
+the repeater whose current state meets all three
+of the following criteria:  rptrPortOperStatus
+does not have the value notPresent(3),
+rptrPortAdminStatus is enabled(1), and
+rptrPortAutoPartitionState is autoPartitioned(2).""",
+        }, # column
+        "rptrInfoLastChange" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.1.4.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime when any of the following
+conditions occurred:
+  1) agent cold- or warm-started;
+  2) this instance of repeater was created
+     (such as when a device or module was
+     added to the system);
+  3) a change in the value of rptrInfoOperStatus;
+  4) ports were added or removed as members of
+     the repeater; or
+  5) any of the counters associated with this
+     repeater had a discontinuity.""",
+        }, # column
+        "rptrMonitorPackage" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2",
+        }, # node
+        "rptrMonitorRptrInfo" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.1",
+        }, # node
+        "rptrMonitorTransmitCollisions" : {
+            "nodetype" : "scalar",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.1.1",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """********* THIS OBJECT IS DEPRECATED **********
+
+For a clause 9 (10Mb/s) repeater, this counter
+is incremented every time the repeater state
+machine enters the TRANSMIT COLLISION state
+from any state other than ONE PORT LEFT
+(Ref: Fig 9-2 [IEEE 802.3 Std]).
+
+For a clause 27 repeater, this counter is
+incremented every time the repeater core state
+diagram enters the Jam state as a result of
+Activity(ALL) > 1 (fig 27-2 [IEEE 802.3 Std]).
+The approximate minimum time for rollover of this
+counter is 16 hours in a 10Mb/s repeater and 1.6
+hours in a 100Mb/s repeater.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.1.1.8, aTransmitCollisions.""",
+        }, # scalar
+        "rptrMonitorGroupInfo" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.2",
+        }, # node
+        "rptrMonitorGroupTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.2.1",
+            "status" : "deprecated",
+            "description" :
+                """********* THIS OBJECT IS DEPRECATED **********
+
+Table of performance and error statistics for the
+groups within the repeater.  The number of entries
+is the same as that in the rptrGroupTable.""",
+        }, # table
+        "rptrMonitorGroupEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.2.1.1",
+            "status" : "deprecated",
+            "linkage" : [
+                "rptrMonitorGroupIndex",
+            ],
+            "description" :
+                """********* THIS OBJECT IS DEPRECATED **********
+
+An entry in the table, containing total
+performance and error statistics for a single
+group.  Regular retrieval of the information in
+this table provides a means of tracking the
+performance and health of the networked devices
+attached to this group's ports.
+
+The counters in this table are redundant in the
+sense that they are the summations of information
+already available through other objects.  However,
+these sums provide a considerable optimization of
+network management traffic over the otherwise
+necessary retrieval of the individual counters
+included in each sum.
+
+Note:  Group-level counters are
+deprecated in this MIB.  It is recommended
+that management applications instead use
+the repeater-level counters contained in
+the rptrMonTable.""",
+        }, # row
+        "rptrMonitorGroupIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.2.1.1.1",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """********* THIS OBJECT IS DEPRECATED **********
+
+This object identifies the group within the
+repeater for which this entry contains
+information.""",
+        }, # column
+        "rptrMonitorGroupTotalFrames" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.2.1.1.2",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """********* THIS OBJECT IS DEPRECATED **********
+
+The total number of frames of valid frame length
+that have been received on the ports in this group
+and for which the FCSError and CollisionEvent
+signals were not asserted.  This counter is the
+summation of the values of the
+rptrMonitorPortReadableFrames counters for all of
+the ports in the group.
+
+This statistic provides one of the parameters
+necessary for obtaining the packet error rate.
+The approximate minimum time for rollover of this
+counter is 80 hours in a 10Mb/s repeater.""",
+        }, # column
+        "rptrMonitorGroupTotalOctets" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.2.1.1.3",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """********* THIS OBJECT IS DEPRECATED **********
+
+The total number of octets contained in the valid
+frames that have been received on the ports in
+this group.  This counter is the summation of the
+values of the rptrMonitorPortReadableOctets
+counters for all of the ports in the group.
+
+This statistic provides an indicator of the total
+data transferred.  The approximate minimum time
+for rollover of this counter is 58 minutes in a
+10Mb/s repeater.""",
+        }, # column
+        "rptrMonitorGroupTotalErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.2.1.1.4",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """********* THIS OBJECT IS DEPRECATED **********
+
+The total number of errors which have occurred on
+all of the ports in this group.  This counter is
+the summation of the values of the
+rptrMonitorPortTotalErrors counters for all of the
+ports in the group.""",
+        }, # column
+        "rptrMonitorPortInfo" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3",
+        }, # node
+        "rptrMonitorPortTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.1",
+            "status" : "current",
+            "description" :
+                """Table of performance and error statistics for the
+ports.  The number of entries is the same as that
+in the rptrPortTable.
+
+The columnar object rptrMonitorPortLastChange
+is used to indicate possible discontinuities
+of counter type columnar objects in the table.""",
+        }, # table
+        "rptrMonitorPortEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.1.1",
+            "status" : "current",
+            "linkage" : [
+                "rptrMonitorPortGroupIndex",
+                "rptrMonitorPortIndex",
+            ],
+            "description" :
+                """An entry in the table, containing performance and
+error statistics for a single port.""",
+        }, # row
+        "rptrMonitorPortGroupIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object identifies the group containing the
+port for which this entry contains information.""",
+        }, # column
+        "rptrMonitorPortIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object identifies the port within the group
+for which this entry contains information.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.1, aPortID.""",
+        }, # column
+        "rptrMonitorPortReadableFrames" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object is the number of frames of valid
+frame length that have been received on this port.
+This counter is incremented by one for each frame
+received on this port whose OctetCount is greater
+than or equal to minFrameSize and less than or
+equal to maxFrameSize (Ref: IEEE 802.3 Std,
+4.4.2.1) and for which the FCSError and
+CollisionEvent signals are not asserted.
+
+A discontinuity may occur in the value
+when the value of object
+rptrMonitorPortLastChange changes.
+
+This statistic provides one of the parameters
+necessary for obtaining the packet error rate.
+The approximate minimum time for rollover of this
+counter is 80 hours at 10Mb/s.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.4, aReadableFrames.""",
+        }, # column
+        "rptrMonitorPortReadableOctets" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object is the number of octets contained in
+valid frames that have been received on this port.
+This counter is incremented by OctetCount for each
+frame received on this port which has been
+determined to be a readable frame (i.e., including
+FCS octets but excluding framing bits and dribble
+bits).
+
+A discontinuity may occur in the value
+when the value of object
+rptrMonitorPortLastChange changes.
+
+This statistic provides an indicator of the total
+data transferred.  The approximate minimum time
+for rollover of this counter in a 10Mb/s repeater
+is 58 minutes.
+
+For ports receiving traffic at a maximum rate in
+a 100Mb/s repeater, this counter can roll over
+in less than 6 minutes.  Since that amount of time
+could be less than a management station's poll cycle
+time, in order to avoid a loss of information a
+management station is advised to also poll the
+rptrMonitorPortUpper32Octets object, or to use the
+64-bit counter defined by
+rptrMonitorPortHCReadableOctets instead of the
+two 32-bit counters.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.5, aReadableOctets.""",
+        }, # column
+        "rptrMonitorPortFCSErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented by one for each frame
+received on this port with the FCSError signal
+asserted and the FramingError and CollisionEvent
+signals deasserted and whose OctetCount is greater
+than or equal to minFrameSize and less than or
+equal to maxFrameSize (Ref: 4.4.2.1, IEEE 802.3
+Std).
+
+A discontinuity may occur in the value
+when the value of object
+rptrMonitorPortLastChange changes.
+
+The approximate minimum time for rollover of this
+counter is 80 hours at 10Mb/s.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.6,
+aFrameCheckSequenceErrors.""",
+        }, # column
+        "rptrMonitorPortAlignmentErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented by one for each frame
+received on this port with the FCSError and
+FramingError signals asserted and CollisionEvent
+signal deasserted and whose OctetCount is greater
+than or equal to minFrameSize and less than or
+equal to maxFrameSize (Ref: IEEE 802.3 Std,
+4.4.2.1).  If rptrMonitorPortAlignmentErrors is
+incremented then the rptrMonitorPortFCSErrors
+Counter shall not be incremented for the same
+frame.
+
+A discontinuity may occur in the value
+when the value of object
+rptrMonitorPortLastChange changes.
+
+The approximate minimum time for rollover of this
+counter is 80 hours at 10Mb/s.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.7, aAlignmentErrors.""",
+        }, # column
+        "rptrMonitorPortFrameTooLongs" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented by one for each frame
+received on this port whose OctetCount is greater
+than maxFrameSize (Ref: 4.4.2.1, IEEE 802.3 Std).
+If rptrMonitorPortFrameTooLongs is incremented
+then neither the rptrMonitorPortAlignmentErrors
+nor the rptrMonitorPortFCSErrors counter shall be
+incremented for the frame.
+
+A discontinuity may occur in the value
+when the value of object
+rptrMonitorPortLastChange changes.
+
+The approximate minimum time for rollover of this
+counter is 61 days in a 10Mb/s repeater.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.8, aFramesTooLong.""",
+        }, # column
+        "rptrMonitorPortShortEvents" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented by one for each
+CarrierEvent on this port with ActivityDuration
+less than ShortEventMaxTime.  ShortEventMaxTime is
+greater than 74 bit times and less than 82 bit
+times.  ShortEventMaxTime has tolerances included
+to provide for circuit losses between a
+conformance test point at the AUI and the
+measurement point within the state machine.
+
+Notes:
+
+ShortEvents may indicate externally
+generated noise hits which will cause the repeater
+to transmit Runts to its other ports, or propagate
+a collision (which may be late) back to the
+transmitting DTE and damaged frames to the rest of
+the network.
+
+Implementors may wish to consider selecting the
+ShortEventMaxTime towards the lower end of the
+allowed tolerance range to accommodate bit losses
+suffered through physical channel devices not
+budgeted for within this standard.
+
+The significance of this attribute is different
+in 10 and 100 Mb/s collision domains.  Clause 9
+repeaters perform fragment extension of short
+events which would be counted as runts on the
+interconnect ports of other repeaters.  Clause
+27 repeaters do not perform fragment extension.
+
+A discontinuity may occur in the value
+when the value of object
+rptrMonitorPortLastChange changes.
+
+The approximate minimum time for rollover of this
+counter is 16 hours in a 10Mb/s repeater.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.9, aShortEvents.""",
+        }, # column
+        "rptrMonitorPortRunts" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.1.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented by one for each
+CarrierEvent on this port that meets one of the
+following two conditions.  Only one test need be
+made.  a) The ActivityDuration is greater than
+ShortEventMaxTime and less than ValidPacketMinTime
+and the CollisionEvent signal is deasserted.  b)
+The OctetCount is less than 64, the
+ActivityDuration is greater than ShortEventMaxTime
+and the CollisionEvent signal is deasserted.
+ValidPacketMinTime is greater than or equal to 552
+bit times and less than 565 bit times.
+
+An event whose length is greater than 74 bit times
+but less than 82 bit times shall increment either
+the shortEvents counter or the runts counter but
+not both.  A CarrierEvent greater than or equal to
+552 bit times but less than 565 bit times may or
+may not be counted as a runt.
+
+ValidPacketMinTime has tolerances included to
+provide for circuit losses between a conformance
+test point at the AUI and the measurement point
+within the state machine.
+
+Runts usually indicate collision fragments, a
+normal network event.  In certain situations
+associated with large diameter networks a
+percentage of collision fragments may exceed
+ValidPacketMinTime.
+A discontinuity may occur in the value
+when the value of object
+rptrMonitorPortLastChange changes.
+
+The approximate minimum time for rollover of this
+counter is 16 hours in a 10Mb/s repeater.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.10, aRunts.""",
+        }, # column
+        "rptrMonitorPortCollisions" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.1.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """For a clause 9 repeater, this counter is
+incremented by one for any CarrierEvent signal
+on any port for which the CollisionEvent signal
+on this port is asserted.  For a clause 27
+repeater port the counter increments on entering
+the Collision Count Increment state of the
+partition state diagram (fig 27-8 of
+[IEEE 802.3 Std]).
+
+A discontinuity may occur in the value
+when the value of object
+rptrMonitorPortLastChange changes.
+
+The approximate minimum time for rollover of this
+counter is 16 hours in a 10Mb/s repeater.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.11, aCollisions.""",
+        }, # column
+        "rptrMonitorPortLateEvents" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.1.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """For a clause 9 repeater port, this counter is
+incremented by one for each CarrierEvent
+on this port in which the CollIn(X)
+variable transitions to the value SQE (Ref:
+9.6.6.2, IEEE 802.3 Std) while the
+ActivityDuration is greater than the
+LateEventThreshold.  For a clause 27 repeater
+port, this counter is incremented by one on
+entering the Collision Count Increment state
+of the  partition state diagram (fig 27-8)
+while the  ActivityDuration is greater than
+the LateEvent- Threshold.  Such a CarrierEvent
+is counted twice, as both a collision and as a
+lateEvent.
+
+The LateEventThreshold is greater than 480 bit
+times and less than 565 bit times.
+LateEventThreshold has tolerances included to
+permit an implementation to build a single
+threshold to serve as both the LateEventThreshold
+and ValidPacketMinTime threshold.
+
+A discontinuity may occur in the value
+when the value of object
+rptrMonitorPortLastChange changes.
+
+The approximate minimum time for rollover of this
+counter is 81 hours in a 10Mb/s repeater.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.12, aLateEvents.""",
+        }, # column
+        "rptrMonitorPortVeryLongEvents" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.1.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """For a clause 9 repeater port, this counter
+is incremented by one for each CarrierEvent
+whose ActivityDuration is greater than the
+MAU Jabber Lockup Protection timer TW3
+(Ref: 9.6.1 & 9.6.5, IEEE 802.3 Std).
+
+For a clause 27 repeater port, this counter
+is incremented by one on entry to the
+Rx Jabber state of the receiver timer state
+diagram (fig 27-7).  Other counters may
+be incremented as appropriate.
+
+A discontinuity may occur in the value
+when the value of object
+rptrMonitorPortLastChange changes.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.13, aVeryLongEvents.""",
+        }, # column
+        "rptrMonitorPortDataRateMismatches" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.1.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented by one for each
+frame received by this port that meets all
+of the conditions required by only one of the
+following two measurement methods:
+
+Measurement method A:  1) The CollisionEvent
+signal is not asserted (10Mb/s operation) or
+the Collision Count Increment state of the
+partition state diagram (fig 27-8 of
+[IEEE 802.3 Std]) has not been entered
+(100Mb/s operation).  2) The ActivityDuration
+is greater than ValidPacketMinTime.  3) The
+frequency (data rate) is detectably mismatched
+from the local transmit frequency.
+
+Measurement method B:  1) The CollisionEvent
+signal is not asserted (10Mb/s operation)
+or the Collision Count Increment state of the
+partition state diagram (fig 27-8 of
+[IEEE 802.3 Std]) has not been entered
+(100Mb/s operation).  2) The OctetCount is
+greater than 63.  3) The frequency (data
+rate) is detectably mismatched from the local
+transmit frequency.  The exact degree of
+mismatch is vendor specific and is to be
+defined by the vendor for conformance testing.
+
+When this event occurs, other counters whose
+increment conditions were satisfied may or may not
+also be incremented, at the implementor's
+discretion.  Whether or not the repeater was able
+to maintain data integrity is beyond the scope of
+this standard.
+
+A discontinuity may occur in the value
+when the value of object
+rptrMonitorPortLastChange changes.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.14, aDataRateMismatches.""",
+        }, # column
+        "rptrMonitorPortAutoPartitions" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.1.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented by one for
+each time the repeater has automatically
+partitioned this port.
+
+The conditions that cause a clause 9
+repeater port to partition are specified in
+the partition state diagram in clause 9 of
+[IEEE 802.3 Std].  They are not differentiated
+here.  A clause 27 repeater port partitions
+on entry to the Partition Wait state of the
+partition state diagram (fig 27-8 in
+[IEEE 802.3 Std]).
+
+A discontinuity may occur in the value
+when the value of object
+rptrMonitorPortLastChange changes.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.15, aAutoPartitions.""",
+        }, # column
+        "rptrMonitorPortTotalErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.1.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The total number of errors which have occurred on
+this port.  This counter is the summation of the
+values of other error counters (for the same
+port), namely:
+
+    rptrMonitorPortFCSErrors,
+    rptrMonitorPortAlignmentErrors,
+    rptrMonitorPortFrameTooLongs,
+    rptrMonitorPortShortEvents,
+    rptrMonitorPortLateEvents,
+    rptrMonitorPortVeryLongEvents,
+    rptrMonitorPortDataRateMismatches, and
+    rptrMonitorPortSymbolErrors.
+
+This counter is redundant in the sense that it is
+the summation of information already available
+through other objects.  However, it is included
+specifically because the regular retrieval of this
+object as a means of tracking the health of a port
+provides a considerable optimization of network
+management traffic over the otherwise necessary
+retrieval of the summed counters.
+
+Note that rptrMonitorPortRunts is not included
+in this total; this is because runts usually
+indicate collision fragments, a normal network
+event.
+
+A discontinuity may occur in the value
+when the value of object
+rptrMonitorPortLastChange changes.""",
+        }, # column
+        "rptrMonitorPortLastChange" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.1.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime when the last of
+the following occurred:
+  1) the agent cold- or warm-started;
+  2) the row for the port was created
+     (such as when a device or module was added
+      to the system); or
+  3) any condition that would cause one of
+     the counters for the row to experience
+     a discontinuity.""",
+        }, # column
+        "rptrMonitor100PortTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.2",
+            "status" : "current",
+            "description" :
+                """Table of additional performance and error
+statistics for 100Mb/s ports, above and
+beyond those parameters that apply to both
+10 and 100Mbps ports.  Entries exist only for
+ports attached to 100Mbps repeaters.
+
+The columnar object rptrMonitorPortLastChange
+is used to indicate possible discontinuities
+of counter type columnar objects in this table.""",
+        }, # table
+        "rptrMonitor100PortEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.2.1",
+            "status" : "current",
+            "linkage" : [
+                "rptrMonitorPortGroupIndex",
+                "rptrMonitorPortIndex",
+            ],
+            "description" :
+                """An entry in the table, containing performance
+and error statistics for a single 100Mb/s port.""",
+        }, # row
+        "rptrMonitorPortIsolates" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented by one each time that
+the repeater port automatically isolates as a
+consequence of false carrier events.  The conditions
+which cause a port to automatically isolate are
+defined by the transition from the False Carrier
+state to the Link Unstable state of the carrier
+integrity state diagram (figure 27-9)
+[IEEE 802.3 Standard].
+
+Note:  Isolates do not affect the value of
+the PortOperStatus object.
+
+A discontinuity may occur in the value
+when the value of object
+rptrMonitorPortLastChange changes.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.16, aIsolates.""",
+        }, # column
+        "rptrMonitorPortSymbolErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented by one each time when
+valid length packet was received at the port and
+there was at least one occurrence of an invalid
+data symbol. This can increment only once per valid
+carrier event. A collision presence at any port of
+the repeater containing port N, will not cause this
+attribute to increment.
+
+A discontinuity may occur in the value
+when the value of object
+rptrMonitorPortLastChange changes.
+
+The approximate minimum time for rollover of this
+counter is 7.4 hours at 100Mb/s.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.17,
+aSymbolErrorDuringPacket.""",
+        }, # column
+        "rptrMonitorPortUpper32Octets" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object is the number of octets contained in
+valid frames that have been received on this port,
+modulo 2**32.  That is, it contains the upper 32
+bits of a 64-bit octets counter, of which the
+lower 32 bits are contained in the
+rptrMonitorPortReadableOctets object.
+
+This two-counter mechanism is provided for those
+network management protocols that do not support
+64-bit counters (e.g. SNMP V1) and are used to
+manage a repeater type of 100Mb/s.
+
+Conformance clauses for this MIB are defined such
+that implementation of this object is not required
+in a system which does not support 100Mb/s.
+However, systems with mixed 10 and 100Mb/s ports
+may implement this object across all ports,
+including 10Mb/s.  If this object is implemented,
+it must be according to the definition in the first
+paragraph of this description; that is, the value
+of this object MUST be a valid count.
+
+A discontinuity may occur in the value
+when the value of object
+rptrMonitorPortLastChange changes.""",
+        }, # column
+        "rptrMonitorPortHCReadableOctets" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.3.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object is the number of octets contained in
+valid frames that have been received on this port.
+This counter is incremented by OctetCount for each
+frame received on this port which has been
+determined to be a readable frame (i.e., including
+FCS octets but excluding framing bits and dribble
+bits).
+
+This statistic provides an indicator of the total
+data transferred.
+
+This counter is a 64-bit version of rptrMonitor-
+PortReadableOctets. It should be used by network
+management protocols which suppport 64-bit counters
+(e.g. SNMPv2).
+
+Conformance clauses for this MIB are defined such
+that implementation of this object is not required
+in a system which does not support 100Mb/s.
+However, systems with mixed 10 and 100Mb/s ports
+may implement this object across all ports,
+including 10Mb/s.  If this object is implemented,
+it must be according to the definition in the first
+paragraph of this description; that is, the value
+of this object MUST be a valid count.
+
+A discontinuity may occur in the value
+when the value of object
+rptrMonitorPortLastChange changes.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.5, aReadableOctets.""",
+        }, # column
+        "rptrMonitorAllRptrInfo" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.4",
+        }, # node
+        "rptrMonTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.4.1",
+            "status" : "current",
+            "description" :
+                """A table of information about each
+non-trivial repeater.  The number of entries
+in this table is the same as the number of
+entries in the rptrInfoTable.
+
+The columnar object rptrInfoLastChange is
+used to indicate possible discontinuities of
+counter type columnar objects in this table.""",
+        }, # table
+        "rptrMonEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.4.1.1",
+            "status" : "current",
+            "linkage" : [
+                "rptrInfoId",
+            ],
+            "description" :
+                """An entry in the table, containing information
+about a single non-trivial repeater.""",
+        }, # row
+        "rptrMonTxCollisions" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.4.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """For a clause 9 (10Mb/s) repeater, this counter
+is incremented every time the repeater state
+machine enters the TRANSMIT COLLISION state
+from any state other than ONE PORT LEFT
+(Ref: Fig 9-2 [IEEE 802.3 Std]).
+
+For a clause 27 repeater, this counter is
+incremented every time the repeater core state
+diagram enters the Jam state as a result of
+Activity(ALL) > 1 (fig 27-2 [IEEE 802.3 Std]).
+
+The approximate minimum time for rollover of this
+counter is 16 hours in a 10Mb/s repeater and 1.6
+hours in a 100Mb/s repeater.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.1.1.8, aTransmitCollisions""",
+        }, # column
+        "rptrMonTotalFrames" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.4.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of frames of valid frame length
+that have been received on the ports in this repeater
+and for which the FCSError and CollisionEvent
+signals were not asserted.  If an implementation
+can not obtain a count of frames as seen by
+the repeater itself, this counter may be
+implemented as the summation of the values of the
+rptrMonitorPortReadableFrames counters for all of
+the ports in the repeater.
+
+This statistic provides one of the parameters
+necessary for obtaining the packet error rate.
+The approximate minimum time for rollover of this
+counter is 80 hours in a 10Mb/s repeater.""",
+        }, # column
+        "rptrMonTotalErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.4.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The total number of errors which have occurred on
+all of the ports in this repeater.  The errors
+included in this count are the same as those listed
+for the rptrMonitorPortTotalErrors counter.  If an
+implementation can not obtain a count of these
+errors as seen by the repeater itself, this counter
+may be implemented as the summation of the values of
+the rptrMonitorPortTotalErrors counters for all of
+the ports in the repeater.""",
+        }, # column
+        "rptrMonTotalOctets" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.4.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The total number of octets contained in the valid
+frames that have been received on the ports in
+this group.  If an implementation can not obtain
+a count of octets as seen by the repeater itself,
+this counter may be the summation of the
+values of the rptrMonitorPortReadableOctets
+counters for all of the ports in the group.
+
+This statistic provides an indicator of the total
+data transferred.  The approximate minimum time
+for rollover of this counter in a 10Mb/s repeater
+is 58 minutes divided by the number of ports in
+the repeater.
+
+For 100Mb/s repeaters processing traffic at a
+maximum rate, this counter can roll over in less
+than 6 minutes divided by the number of ports in
+the repeater.  Since that amount of time could
+be less than a management station's poll cycle
+time, in order to avoid a loss of information a
+management station is advised to also poll the
+rptrMonUpper32TotalOctets object, or to use the
+64-bit counter defined by rptrMonHCTotalOctets
+instead of the two 32-bit counters.""",
+        }, # column
+        "rptrMon100Table" : {
+            "nodetype" : "table",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.4.2",
+            "status" : "current",
+            "description" :
+                """A table of additional information about each
+100Mb/s repeater, augmenting the entries in
+the rptrMonTable.  Entries exist in this table
+only for 100Mb/s repeaters.
+
+The columnar object rptrInfoLastChange is
+used to indicate possible discontinuities of
+counter type columnar objects in this table.""",
+        }, # table
+        "rptrMon100Entry" : {
+            "nodetype" : "row",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.4.2.1",
+            "status" : "current",
+            "linkage" : [
+                "rptrInfoId",
+            ],
+            "description" :
+                """An entry in the table, containing information
+about a single 100Mbps repeater.""",
+        }, # row
+        "rptrMonUpper32TotalOctets" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.4.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The total number of octets contained in the valid
+frames that have been received on the ports in
+this repeater, modulo 2**32.  That is, it contains
+the upper 32 bits of a 64-bit counter, of which
+the lower 32 bits are contained in the
+rptrMonTotalOctets object.  If an implementation
+can not obtain a count of octets as seen
+by the repeater itself, the 64-bit value
+may be the summation of the values of the
+rptrMonitorPortReadableOctets counters combined
+with the corresponding rptrMonitorPortUpper32Octets
+counters for all of the ports in the repeater.
+
+This statistic provides an indicator of the total
+data transferred within the repeater.
+
+This two-counter mechanism is provided for those
+network management protocols that do not support
+64-bit counters (e.g. SNMP V1) and are used to
+manage a repeater type of 100Mb/s.
+
+Conformance clauses for this MIB are defined such
+that implementation of this object is not required
+in a system which does not support 100Mb/s.
+However, systems with mixed 10 and 100Mb/s ports
+may implement this object across all ports,
+including 10Mb/s.  If this object is implemented,
+it must be according to the definition in the first
+paragraph of this description; that is, the value
+of this object MUST be a valid count.""",
+        }, # column
+        "rptrMonHCTotalOctets" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.2.4.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The total number of octets contained in the valid
+frames that have been received on the ports in
+this group.  If a implementation can not obtain
+a count of octets as seen by the repeater itself,
+this counter may be the summation of the
+values of the rptrMonitorPortReadableOctets
+counters for all of the ports in the group.
+
+This statistic provides an indicator of the total
+data transferred.
+
+This counter is a 64-bit (high-capacity) version
+of rptrMonUpper32TotalOctets and rptrMonTotalOctets.
+It should be used by network management protocols
+which support 64-bit counters (e.g. SNMPv2).
+
+Conformance clauses for this MIB are defined such
+that implementation of this object is not required
+in a system which does not support 100Mb/s.
+However, systems with mixed 10 and 100Mb/s ports
+may implement this object across all ports,
+including 10Mb/s.  If this object is implemented,
+it must be according to the definition in the first
+paragraph of this description; that is, the value
+of this object MUST be a valid count.""",
+        }, # column
+        "rptrAddrTrackPackage" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3",
+        }, # node
+        "rptrAddrTrackRptrInfo" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.1",
+        }, # node
+        "rptrAddrSearchTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.1.1",
+            "status" : "current",
+            "description" :
+                """This table contains one entry per repeater in the
+system.  It defines objects which allow a network
+management application to instruct an agent to watch
+for a given MAC address and report which port it
+was seen on.  Only one address search can be in
+progress on each repeater at any one time.  Before
+starting an address search, a management application
+should obtain 'ownership' of the entry in
+rptrAddrSearchTable for the repeater that is to
+perform the search.  This is accomplished with the
+rptrAddrSearchLock and rptrAddrSearchStatus as
+follows:
+
+try_again:
+    get(rptrAddrSearchLock, rptrAddrSearchStatus)
+    while (rptrAddrSearchStatus != notInUse)
+    {
+        /* Loop waiting for objects to be available*/
+        short delay
+        get(rptrAddrSearchLock, rptrAddrSearchStatus)
+    }
+
+    /* Try to claim map objects */
+    lock_value = rptrAddrSearchLock
+    if ( set(rptrAddrSearchLock = lock_value,
+             rptrAddrSearchStatus = inUse,
+             rptrAddrSearchOwner = 'my-IP-address)
+          == FAILURE)
+        /* Another manager got the lock */
+        goto try_again
+
+    /* I have the lock */
+    set (rptrAddrSearchAddress = <search target>)
+
+    wait for rptrAddrSearchState to change from none
+
+    if (rptrAddrSearchState == single)
+        get (rptrAddrSearchGroup, rptrAddrSearchPort)
+    /* release the lock, making sure not to overwrite
+       anyone else's lock */
+    set (rptrAddrSearchLock = lock_value+1,
+         rptrAddrSearchStatus = notInUse,
+         rptrAddrSearchOwner = '')
+
+A management station first retrieves the values of
+the appropriate instances of the rptrAddrSearchLock
+and rptrAddrSearchStatus objects, periodically
+repeating the retrieval if necessary, until the value
+of rptrAddrSearchStatus is 'notInUse'.  The
+management station then tries to set the same
+instance of the rptrAddrSearchLock object to the
+value it just retrieved, the same instance of the
+rptrAddrSearchStatus object to 'inUse', and the
+corresponding instance of rptrAddrSearchOwner to a
+value indicating itself.  If the set operation
+succeeds, then the management station has obtained
+ownership of the rptrAddrSearchEntry, and the value
+of rptrAddrSearchLock is incremented by the agent (as
+per the semantics of TestAndIncr).  Failure of the
+set operation indicates that some other manager has
+obtained ownership of the rptrAddrSearchEntry.
+
+Once ownership is obtained, the management station
+can proceed with the search operation.  Note that the
+agent will reset rptrAddrSearchStatus to 'notInUse'
+if it has been in the 'inUse' state for an abnormally
+long period of time, to prevent a misbehaving manager
+from permanently locking the entry.  It is suggested
+that this timeout period be between one and five
+minutes.
+
+When the management station has completed its search
+operation, it should free the entry by setting
+the instance of the rptrAddrSearchLock object to the
+previous value + 1, the instance of the
+rptrAddrSearchStatus to 'notInUse', and the instance
+of rptrAddrSearchOwner to a zero length string.  This
+is done to prevent overwriting another station's
+lock.""",
+        }, # table
+        "rptrAddrSearchEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.1.1.1",
+            "status" : "current",
+            "linkage" : [
+                "rptrInfoId",
+            ],
+            "description" :
+                """An entry containing objects for invoking an address
+search on a repeater.""",
+        }, # row
+        "rptrAddrSearchLock" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.1.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TestAndIncr"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object is used by a management station as an
+advisory lock for this rptrAddrSearchEntry.""",
+        }, # column
+        "rptrAddrSearchStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.1.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "notInUse" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "inUse" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object is used to indicate that some management
+station is currently using this rptrAddrSearchEntry.
+Cooperating managers should set this object to
+'notInUse' when they are finished using this entry.
+The agent will automatically set the value of this
+object to 'notInUse' if it has been set to 'inUse'
+for an unusually long period of time.""",
+        }, # column
+        "rptrAddrSearchAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.1.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "MacAddress"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object is used to search for a specified MAC
+address.  When this object is set, an address search
+begins.  This automatically sets the corresponding
+instance of the rptrAddrSearchState object  to 'none'
+and the corresponding instances of the
+rptrAddrSearchGroup and rptrAddrSearchPort objects to
+0.
+
+When a valid frame is received by this repeater with
+a source MAC address which matches the current value
+of rptrAddrSearchAddress, the agent will update the
+corresponding instances of rptrAddrSearchState,
+rptrAddrSearchGroup and rptrAddrSearchPort to reflect
+the current status of the search, and the group and
+port on which the frame was seen.""",
+        }, # column
+        "rptrAddrSearchState" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.1.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "none" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "single" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "multiple" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The current state of the MAC address search on this
+repeater.  This object is initialized to 'none' when
+the corresponding instance of rptrAddrSearchAddress
+is set.  If the agent detects the address on exactly
+one port, it will set this object to 'single', and
+set the corresponding instances of
+rptrAddrSearchGroup and rptrAddrSearchPort to reflect
+the group and port on which the address was heard.
+If the agent detects the address on more than one
+port, it will set this object to 'multiple'.""",
+        }, # column
+        "rptrAddrSearchGroup" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.1.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The group from which an error-free frame whose
+source address is equal to the corresponding instance
+of rptrAddrSearchAddress has been received.  The
+value of this object is undefined when the
+corresponding instance of rptrAddrSearchState is
+equal to 'none' or 'multiple'.""",
+        }, # column
+        "rptrAddrSearchPort" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.1.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The port rom which an error-free frame whose
+source address is equal to the corresponding instance
+of rptrAddrSearchAddress has been received.  The
+value of this object is undefined when the
+corresponding instance of rptrAddrSearchState is
+equal to 'none' or 'multiple'.""",
+        }, # column
+        "rptrAddrSearchOwner" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.1.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "OwnerString"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The entity which currently has 'ownership' of this
+rptrAddrSearchEntry.""",
+        }, # column
+        "rptrAddrTrackGroupInfo" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.2",
+        }, # node
+        "rptrAddrTrackPortInfo" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.3",
+        }, # node
+        "rptrAddrTrackTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.3.1",
+            "status" : "current",
+            "description" :
+                """Table of address mapping information about the
+ports.""",
+        }, # table
+        "rptrAddrTrackEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.3.1.1",
+            "status" : "current",
+            "linkage" : [
+                "rptrAddrTrackGroupIndex",
+                "rptrAddrTrackPortIndex",
+            ],
+            "description" :
+                """An entry in the table, containing address mapping
+information about a single port.""",
+        }, # row
+        "rptrAddrTrackGroupIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.3.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object identifies the group containing the
+port for which this entry contains information.""",
+        }, # column
+        "rptrAddrTrackPortIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.3.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object identifies the port within the group
+for which this entry contains information.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.1, aPortID.""",
+        }, # column
+        "rptrAddrTrackLastSourceAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.3.1.1.3",
+            "status" : "deprecated",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "MacAddress"},
+            },
+            "access" : "readonly",
+            "description" :
+                """********* THIS OBJECT IS DEPRECATED **********
+This object is the SourceAddress of the last
+readable frame (i.e., counted by
+rptrMonitorPortReadableFrames) received by this
+port.
+
+This object has been deprecated because its value
+is undefined when no frames have been observed on
+this port.  The replacement object is
+rptrAddrTrackNewLastSrcAddress.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.18, aLastSourceAddress.""",
+        }, # column
+        "rptrAddrTrackSourceAddrChanges" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.3.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented by one for each time
+that the rptrAddrTrackLastSourceAddress attribute
+for this port has changed.
+
+This may indicate whether a link is connected to a
+single DTE or another multi-user segment.
+
+A discontinuity may occur in the value when the
+value of object rptrMonitorPortLastChange changes.
+
+The approximate minimum time for rollover of this
+counter is 81 hours in a 10Mb/s repeater.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.19, aSourceAddressChanges.""",
+        }, # column
+        "rptrAddrTrackNewLastSrcAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.3.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMP-REPEATER-MIB", "name" : "OptMacAddr"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object is the SourceAddress of the last
+readable frame (i.e., counted by
+rptrMonitorPortReadableFrames) received by this
+port.  If no frames have been received by this
+port since the agent began monitoring the port
+activity, the agent shall return a string of
+length zero.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.18, aLastSourceAddress.""",
+        }, # column
+        "rptrAddrTrackCapacity" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.3.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The maximum number of addresses that can be
+detected on this port. This value indicates
+to the maximum  number of entries in the
+rptrExtAddrTrackTable relative to this port.
+
+If this object has the value of 1, the agent
+implements only the LastSourceAddress mechanism
+described by RFC 1368 or RFC 1516.""",
+        }, # column
+        "rptrExtAddrTrackTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.3.2",
+            "status" : "current",
+            "description" :
+                """A table to extend the address tracking table (i.e.,
+rptrAddrTrackTable) with a list of source MAC
+addresses that were recently received on each port.
+The number of ports is the same as the number
+of entries in table rptrPortTable. The number of
+entries in this table depends on the agent/repeater
+implementation and the number of different
+addresses received on each port.
+
+The first entry for each port contains
+the same MAC address that is given by the
+rptrAddrTrackNewLastSrcAddress for that port.
+
+Entries in this table for a particular port are
+retained when that port is switched from one
+repeater to another.
+
+The ordering of MAC addresses listed for a
+particular port is implementation dependent.""",
+        }, # table
+        "rptrExtAddrTrackEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.3.2.1",
+            "status" : "current",
+            "linkage" : [
+                "rptrAddrTrackGroupIndex",
+                "rptrAddrTrackPortIndex",
+                "rptrExtAddrTrackMacIndex",
+            ],
+            "description" :
+                """A row in the table of extended address tracking
+information for ports. Entries can not be directly
+created or deleted via SNMP operations.""",
+        }, # row
+        "rptrExtAddrTrackMacIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.3.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The index of a source MAC address seen on
+the port.
+
+The ordering of MAC addresses listed for a
+particular port is implementation dependent.
+
+There is no implied relationship between a
+particular index and a particular MAC
+address.  The index for a particular MAC
+address may change without notice.""",
+        }, # column
+        "rptrExtAddrTrackSourceAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.3.3.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "MacAddress"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The source MAC address from a readable frame
+(i.e., counted by rptrMonitorPortReadableFrames)
+recently received by the port.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.3.1.18, aLastSourceAddress.""",
+        }, # column
+        "rptrTopNPackage" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.4",
+        }, # node
+        "rptrTopNRptrInfo" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.4.1",
+        }, # node
+        "rptrTopNGroupInfo" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.4.2",
+        }, # node
+        "rptrTopNPortInfo" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.4.3",
+        }, # node
+        "rptrTopNPortControlTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.4.3.1",
+            "status" : "current",
+            "description" :
+                """A table of control records for reports on the top `N'
+ports for the rate of a selected counter. The number
+of entries depends on the configuration of the agent.
+The maximum number of entries is implementation
+dependent.""",
+        }, # table
+        "rptrTopNPortControlEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.4.3.1.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "rptrTopNPortControlIndex",
+            ],
+            "description" :
+                """A set of parameters that control the creation of a
+report of the top N ports according to several metrics.""",
+        }, # row
+        "rptrTopNPortControlIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.4.3.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """An index that uniquely identifies an entry in the
+rptrTopNPortControl table.  Each such entry defines
+one top N report prepared for a repeater or system.""",
+        }, # column
+        "rptrTopNPortRepeaterId" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.4.3.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """Identifies the repeater for which a top N report will
+be prepared (see rptrInfoId).  If the value of this
+object is positive, only ports assigned to this repeater
+will be used to form the list in which to order the
+Top N table.  If this value is zero, all ports will be
+eligible for inclusion on the list.
+
+The value of this object may not be modified if the
+associated rptrTopNPortRowStatus object is equal to
+active(1).
+If, for a particular row in this table, the repeater
+specified by the value of this object goes away (is
+removed from the rptrInfoTable) while the associated
+rptrTopNPortRowStatus object is equal to active(1),
+the row in this table is preserved by the agent but
+the value of rptrTopNPortRowStatus is changed to
+notInService(2), and the agent may time out the row
+if appropriate.  If the specified repeater comes
+back (reappears in the rptrInfoTable) before the row
+has been timed out, the management station must set
+the value of the rptrTopNPortRowStatus object back
+to active(1) if desired (the agent doesn't do this
+automatically).""",
+        }, # column
+        "rptrTopNPortRateBase" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.4.3.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "readableFrames" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "readableOctets" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "fcsErrors" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "alignmentErrors" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "frameTooLongs" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "shortEvents" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "runts" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                    "collisions" : {
+                        "nodetype" : "namednumber",
+                        "number" : "8"
+                    },
+                    "lateEvents" : {
+                        "nodetype" : "namednumber",
+                        "number" : "9"
+                    },
+                    "veryLongEvents" : {
+                        "nodetype" : "namednumber",
+                        "number" : "10"
+                    },
+                    "dataRateMismatches" : {
+                        "nodetype" : "namednumber",
+                        "number" : "11"
+                    },
+                    "autoPartitions" : {
+                        "nodetype" : "namednumber",
+                        "number" : "12"
+                    },
+                    "totalErrors" : {
+                        "nodetype" : "namednumber",
+                        "number" : "13"
+                    },
+                    "isolates" : {
+                        "nodetype" : "namednumber",
+                        "number" : "14"
+                    },
+                    "symbolErrors" : {
+                        "nodetype" : "namednumber",
+                        "number" : "15"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The monitored variable, which the rptrTopNPortRate
+variable is based upon.
+
+The value of this object may not be modified if
+the associated rptrTopNPortRowStatus object has
+a value of active(1).""",
+        }, # column
+        "rptrTopNPortTimeRemaining" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.4.3.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """The number of seconds left in the report
+currently being collected.  When this object
+is modified by the management station, a new
+collection is started, possibly aborting a
+currently running report.  The new value is
+used as the requested duration of this report,
+which is loaded into the associated
+rptrTopNPortDuration object.
+
+When this object is set to a non-zero value,
+any associated rptrTopNPortEntries shall be
+made inaccessible by the agent.  While the value
+of this object is non-zero, it decrements by one
+per second until it reaches zero.  During this
+time, all associated rptrTopNPortEntries shall
+remain inaccessible.  At the time that this object
+decrements to zero, the report is made accessible
+in the rptrTopNPortTable.  Thus, the rptrTopNPort
+table needs to be created only at the end of the
+collection interval.
+
+If the value of this object is set to zero
+while the associated report is running, the
+running report is aborted and no associated
+rptrTopNPortEntries are created.""",
+        }, # column
+        "rptrTopNPortDuration" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.4.3.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of seconds that this report has
+collected during the last sampling interval,
+or if this report is currently being collected,
+the number of seconds that this report is being
+collected during this sampling interval.
+
+When the associated rptrTopNPortTimeRemaining
+object is set, this object shall be set by the
+agent to the same value and shall not be modified
+until the next time the rptrTopNPortTimeRemaining
+is set.
+
+This value shall be zero if no reports have been
+requested for this rptrTopNPortControlEntry.""",
+        }, # column
+        "rptrTopNPortRequestedSize" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.4.3.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readwrite",
+            "default" : "10",
+            "description" :
+                """The maximum number of repeater ports requested
+for the Top N Table.
+
+When this object is created or modified, the
+agent should set rptrTopNPortGrantedSize as close
+to this object as is possible for the particular
+implementation and available resources.""",
+        }, # column
+        "rptrTopNPortGrantedSize" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.4.3.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The maximum number of repeater ports in the
+top N table.
+
+When the associated rptrTopNPortRequestedSize object is
+created or modified, the agent should set this object as
+closely to the requested value as is possible for the
+particular implementation and available resources.  The
+agent must not lower this value except as a result of a
+set to the associated rptrTopNPortRequestedSize object.""",
+        }, # column
+        "rptrTopNPortStartTime" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.4.3.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime when this top N report was
+last started.  In other words, this is the time that
+the associated rptrTopNPortTimeRemaining object was
+modified to start the requested report.
+
+If the report has not yet been started, the value
+of this object is zero.""",
+        }, # column
+        "rptrTopNPortOwner" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.4.3.1.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "OwnerString"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The entity that configured this entry and is
+using the resources assigned to it.""",
+        }, # column
+        "rptrTopNPortRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.4.3.1.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The status of this row.
+
+If the value of this object is not equal to
+active(1), all associated entries in the
+rptrTopNPortTable shall be deleted by the
+agent.""",
+        }, # column
+        "rptrTopNPortTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.4.3.2",
+            "status" : "current",
+            "description" :
+                """A table of reports for the top `N' ports based on
+setting of associated control table entries. The
+maximum number of entries depends on the number
+of entries in table rptrTopNPortControlTable and
+the value of object rptrTopNPortGrantedSize for
+each entry.
+
+For each entry in the rptrTopNPortControlTable,
+repeater ports with the highest value of
+rptrTopNPortRate shall be placed in this table
+in decreasing order of that rate until there is
+no more room or until there are no more ports.""",
+        }, # table
+        "rptrTopNPortEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.4.3.2.1",
+            "status" : "current",
+            "linkage" : [
+                "rptrTopNPortControlIndex",
+                "rptrTopNPortIndex",
+            ],
+            "description" :
+                """A set of statistics for a repeater port that is
+part of a top N report.""",
+        }, # row
+        "rptrTopNPortIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.4.3.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """An index that uniquely identifies an entry in
+the rptrTopNPort table among those in the same
+report.  This index is between 1 and N, where N
+is the number of entries in this report.  Increasing
+values of rptrTopNPortIndex shall be assigned to
+entries with decreasing values of rptrTopNPortRate
+until index N is assigned to the entry with the
+lowest value of rptrTopNPortRate or there are no
+more rptrTopNPortEntries.
+
+No ports are included in a report where their
+value of rptrTopNPortRate would be zero.""",
+        }, # column
+        "rptrTopNPortGroupIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.4.3.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object identifes the group containing
+the port for this entry. (See also object
+type rptrGroupIndex.)""",
+        }, # column
+        "rptrTopNPortPortIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.4.3.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The index of the repeater port.
+(See object type rptrPortIndex.)""",
+        }, # column
+        "rptrTopNPortRate" : {
+            "nodetype" : "column",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.4.3.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Gauge32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The amount of change in the selected variable
+during this sampling interval for the identified
+port.  The selected variable is that port's
+instance of the object selected by
+rptrTopNPortRateBase.""",
+        }, # column
+        "snmpRptrMod" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.5",
+            "status" : "current",
+        }, # node
+        "snmpRptrModConf" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.5.1",
+        }, # node
+        "snmpRptrModCompls" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.5.1.1",
+        }, # node
+        "snmpRptrModObjGrps" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.5.1.2",
+        }, # node
+        "snmpRptrModNotGrps" : {
+            "nodetype" : "node",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.5.1.3",
+        }, # node
+    }, # nodes
+
+    "notifications" : {
+        "rptrHealth" : {
+            "nodetype" : "notification",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.0.1",
+            "status" : "deprecated",
+            "objects" : {
+                "rptrOperStatus" : {
+                    "nodetype" : "object",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+            },
+            "description" :
+                """********* THIS OBJECT IS DEPRECATED **********
+
+In a system containing a single managed repeater,
+the rptrHealth notification conveys information
+related to the operational status of the repeater.
+It is sent either when the value of
+rptrOperStatus changes, or upon completion of a
+non-disruptive test.
+
+The rptrHealth notification must contain the
+rptrOperStatus object.  The agent may optionally
+include the rptrHealthText object in the varBind
+list.  See the rptrOperStatus and rptrHealthText
+objects for descriptions of the information that
+is sent.
+
+The agent must throttle the generation of
+consecutive rptrHealth traps so that there is at
+least a five-second gap between traps of this
+type.  When traps are throttled, they are dropped,
+not queued for sending at a future time.  (Note
+that 'generating' a trap means sending to all
+configured recipients.)""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.1.3.1, nRepeaterHealth
+notification.""",
+        }, # notification
+        "rptrGroupChange" : {
+            "nodetype" : "notification",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.0.2",
+            "status" : "deprecated",
+            "objects" : {
+                "rptrGroupIndex" : {
+                    "nodetype" : "object",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+            },
+            "description" :
+                """********* THIS OBJECT IS DEPRECATED **********
+
+In a system containing a single managed repeater,
+this notification is sent when a change occurs in the
+group structure of the repeater.  This occurs only
+when a group is logically or physically removed
+from or added to a repeater.  The varBind list
+contains the identifier of the group that was
+removed or added.
+
+The agent must throttle the generation of
+consecutive rptrGroupChange traps for the same
+group so that there is at least a five-second gap
+between traps of this type.  When traps are
+throttled, they are dropped, not queued for
+sending at a future time.  (Note that 'generating'
+a trap means sending to all configured
+recipients.)""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.1.3.3, nGroupMapChange
+notification.""",
+        }, # notification
+        "rptrResetEvent" : {
+            "nodetype" : "notification",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.0.3",
+            "status" : "deprecated",
+            "objects" : {
+                "rptrOperStatus" : {
+                    "nodetype" : "object",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+            },
+            "description" :
+                """********* THIS OBJECT IS DEPRECATED **********
+
+In a system containing a single managed repeater-unit,
+the rptrResetEvent notification conveys information
+related to the operational status of the repeater.
+This trap is sent on completion of a repeater
+reset action.  A repeater reset action is defined
+as an a transition to the START state of Fig 9-2
+in section 9 [IEEE 802.3 Std], when triggered by a
+management command (e.g., an SNMP Set on the
+rptrReset object).
+
+The agent must throttle the generation of
+consecutive rptrResetEvent traps so that there is
+at least a five-second gap between traps of this
+type.  When traps are throttled, they are dropped,
+not queued for sending at a future time.  (Note
+that 'generating' a trap means sending to all
+configured recipients.)
+
+The rptrResetEvent trap is not sent when the agent
+restarts and sends an SNMP coldStart or warmStart
+trap.  However, it is recommended that a repeater
+agent send the rptrOperStatus object as an
+optional object with its coldStart and warmStart
+trap PDUs.
+
+The rptrOperStatus object must be included in the
+varbind list sent with this trap.  The agent may
+optionally include the rptrHealthText object as
+well.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.1.3.2, nRepeaterReset
+notification.""",
+        }, # notification
+        "rptrInfoHealth" : {
+            "nodetype" : "notification",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.0.4",
+            "status" : "current",
+            "objects" : {
+                "rptrInfoOperStatus" : {
+                    "nodetype" : "object",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+            },
+            "description" :
+                """In a system containing multiple managed repeaters,
+the rptrInfoHealth notification conveys information
+related to the operational status of a repeater.
+It is sent either when the value of rptrInfoOperStatus
+changes, or upon completion of a non-disruptive test.
+
+The agent must throttle the generation of
+consecutive rptrInfoHealth notifications for
+the same repeater so that there is at least
+a five-second gap between notifications of this type.
+When notifications are throttled, they are dropped,
+not queued for sending at a future time.  (Note
+that 'generating' a notification means sending
+to all configured recipients.)""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.1.3.1, nRepeaterHealth
+notification.""",
+        }, # notification
+        "rptrInfoResetEvent" : {
+            "nodetype" : "notification",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.0.5",
+            "status" : "current",
+            "objects" : {
+                "rptrInfoOperStatus" : {
+                    "nodetype" : "object",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+            },
+            "description" :
+                """In a system containing multiple managed
+repeaters, the rptrInfoResetEvent notification
+conveys information related to the operational
+status of a repeater. This notification is sent
+on completion of a repeater reset action.  A
+repeater reset action is defined as a transition
+to the START state of Fig 9-2 in section 9 of
+[IEEE 802.3 Std], when triggered by a management
+command (e.g., an SNMP Set on the rptrInfoReset
+object).
+
+The agent must throttle the generation of
+consecutive rptrInfoResetEvent notifications for
+a single repeater so that there is at least
+a five-second gap between notifications of
+this type.  When notifications are throttled,
+they are dropped, not queued for sending at
+a future time.  (Note that 'generating' a
+notification means sending to all configured
+recipients.)
+
+The rptrInfoResetEvent is not sent when the
+agent restarts and sends an SNMP coldStart or
+warmStart trap.  However, it is recommended that
+a repeater agent send the rptrInfoOperStatus
+object as an optional object with its coldStart
+and warmStart trap PDUs.""",
+            "reference" :
+                """[IEEE 802.3 Mgt], 30.4.1.3.2, nRepeaterReset
+notification.""",
+        }, # notification
+    }, # notifications
+
+    "groups" : {
+        "snmpRptrGrpBasic1516" : {
+            "nodetype" : "group",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.5.1.2.1",
+            "status" : "deprecated",
+            "members" : {
+                "rptrGroupCapacity" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrOperStatus" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrHealthText" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrReset" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrNonDisruptTest" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrTotalPartitionedPorts" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrGroupIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrGroupDescr" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrGroupObjectID" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrGroupOperStatus" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrGroupLastOperStatusChange" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrGroupPortCapacity" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrPortGroupIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrPortIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrPortAdminStatus" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrPortAutoPartitionState" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrPortOperStatus" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+            }, # members
+            "description" :
+                """********* THIS GROUP IS DEPRECATED **********
+
+Basic group from RFCs 1368 and 1516.
+
+NOTE: this object group is DEPRECATED and replaced
+      with snmpRptrGrpBasic.""",
+        }, # group
+        "snmpRptrGrpMonitor1516" : {
+            "nodetype" : "group",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.5.1.2.2",
+            "status" : "deprecated",
+            "members" : {
+                "rptrMonitorTransmitCollisions" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorGroupIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorGroupTotalFrames" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorGroupTotalOctets" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorGroupTotalErrors" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortGroupIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortReadableFrames" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortReadableOctets" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortFCSErrors" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortAlignmentErrors" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortFrameTooLongs" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortShortEvents" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortRunts" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortCollisions" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortLateEvents" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortVeryLongEvents" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortDataRateMismatches" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortAutoPartitions" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortTotalErrors" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+            }, # members
+            "description" :
+                """********* THIS GROUP IS DEPRECATED **********
+
+Monitor group from RFCs 1368 and 1516.
+
+NOTE: this object group is DEPRECATED and replaced
+      with snmpRptrGrpMonitor.""",
+        }, # group
+        "snmpRptrGrpAddrTrack1368" : {
+            "nodetype" : "group",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.5.1.2.3",
+            "status" : "obsolete",
+            "members" : {
+                "rptrAddrTrackGroupIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrAddrTrackPortIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrAddrTrackLastSourceAddress" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrAddrTrackSourceAddrChanges" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+            }, # members
+            "description" :
+                """Address tracking group from RFC 1368.
+
+NOTE: this object group is OBSOLETE and replaced
+      with snmpRptrGrpAddrTrack1516.""",
+        }, # group
+        "snmpRptrGrpAddrTrack1516" : {
+            "nodetype" : "group",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.5.1.2.4",
+            "status" : "deprecated",
+            "members" : {
+                "rptrAddrTrackGroupIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrAddrTrackPortIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrAddrTrackLastSourceAddress" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrAddrTrackSourceAddrChanges" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrAddrTrackNewLastSrcAddress" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+            }, # members
+            "description" :
+                """********* THIS GROUP IS DEPRECATED **********
+Address tracking group from RFC 1516.
+
+NOTE: this object group is DEPRECATED and
+      replaced with snmpRptrGrpAddrTrack.""",
+        }, # group
+        "snmpRptrGrpBasic" : {
+            "nodetype" : "group",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.5.1.2.5",
+            "status" : "current",
+            "members" : {
+                "rptrGroupIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrGroupObjectID" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrGroupOperStatus" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrGroupPortCapacity" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrPortGroupIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrPortIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrPortAdminStatus" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrPortAutoPartitionState" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrPortOperStatus" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrPortRptrId" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrInfoId" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrInfoRptrType" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrInfoOperStatus" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrInfoReset" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrInfoPartitionedPorts" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrInfoLastChange" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+            }, # members
+            "description" :
+                """Basic group for a system with one or more
+repeater-units in multi-segment (post-RFC 1516)
+version of the MIB module.""",
+        }, # group
+        "snmpRptrGrpMonitor" : {
+            "nodetype" : "group",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.5.1.2.6",
+            "status" : "current",
+            "members" : {
+                "rptrMonitorPortGroupIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortReadableFrames" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortReadableOctets" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortFCSErrors" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortAlignmentErrors" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortFrameTooLongs" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortShortEvents" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortRunts" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortCollisions" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortLateEvents" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortVeryLongEvents" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortDataRateMismatches" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortAutoPartitions" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortTotalErrors" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortLastChange" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonTxCollisions" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonTotalFrames" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonTotalErrors" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonTotalOctets" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+            }, # members
+            "description" :
+                """Monitor group for a system with one or more
+repeater-units in multi-segment (post-RFC 1516)
+version of the MIB module.""",
+        }, # group
+        "snmpRptrGrpMonitor100" : {
+            "nodetype" : "group",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.5.1.2.7",
+            "status" : "current",
+            "members" : {
+                "rptrMonitorPortIsolates" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortSymbolErrors" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonitorPortUpper32Octets" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonUpper32TotalOctets" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+            }, # members
+            "description" :
+                """Monitor group for 100Mb/s ports and repeaters
+in a system with one or more repeater-units in
+multi-segment (post-RFC 1516) version of the MIB
+module.  Systems which support Counter64 should
+also implement snmpRptrGrpMonitor100w64.""",
+        }, # group
+        "snmpRptrGrpMonitor100w64" : {
+            "nodetype" : "group",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.5.1.2.8",
+            "status" : "current",
+            "members" : {
+                "rptrMonitorPortHCReadableOctets" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrMonHCTotalOctets" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+            }, # members
+            "description" :
+                """Monitor group for 100Mb/s ports and repeaters in a
+system with one or more repeater-units and support
+for Counter64.""",
+        }, # group
+        "snmpRptrGrpAddrTrack" : {
+            "nodetype" : "group",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.5.1.2.9",
+            "status" : "current",
+            "members" : {
+                "rptrAddrTrackGroupIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrAddrTrackPortIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrAddrTrackSourceAddrChanges" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrAddrTrackNewLastSrcAddress" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrAddrTrackCapacity" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+            }, # members
+            "description" :
+                """Passive address tracking group for post-RFC 1516
+version of the MIB module.""",
+        }, # group
+        "snmpRptrGrpExtAddrTrack" : {
+            "nodetype" : "group",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.5.1.2.10",
+            "status" : "current",
+            "members" : {
+                "rptrExtAddrTrackMacIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrExtAddrTrackSourceAddress" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+            }, # members
+            "description" :
+                """Extended passive address tracking group for
+a system with one or more repeater-units in
+post-RFC 1516 version of the MIB module.""",
+        }, # group
+        "snmpRptrGrpRptrAddrSearch" : {
+            "nodetype" : "group",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.5.1.2.11",
+            "status" : "current",
+            "members" : {
+                "rptrAddrSearchLock" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrAddrSearchStatus" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrAddrSearchAddress" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrAddrSearchState" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrAddrSearchGroup" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrAddrSearchPort" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrAddrSearchOwner" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+            }, # members
+            "description" :
+                """Active MAC address search group and topology
+mapping support for repeaters.""",
+        }, # group
+        "snmpRptrGrpTopNPort" : {
+            "nodetype" : "group",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.5.1.2.12",
+            "status" : "current",
+            "members" : {
+                "rptrTopNPortControlIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrTopNPortRepeaterId" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrTopNPortRateBase" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrTopNPortTimeRemaining" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrTopNPortDuration" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrTopNPortRequestedSize" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrTopNPortGrantedSize" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrTopNPortStartTime" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrTopNPortOwner" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrTopNPortRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrTopNPortIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrTopNPortGroupIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrTopNPortPortIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "rptrTopNPortRate" : {
+                    "nodetype" : "member",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+            }, # members
+            "description" :
+                """Top `N' group for repeater ports.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "snmpRptrModComplRFC1368" : {
+            "nodetype" : "compliance",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.5.1.1.1",
+            "status" : "obsolete",
+            "description" :
+                """Compliance for RFC 1368.
+
+NOTE: this module compliance is OBSOLETE and
+      replaced by snmpRptrModComplRFC1516.""",
+            "requires" : {
+                "snmpRptrGrpBasic1516" : {
+                    "nodetype" : "mandatory",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "snmpRptrGrpMonitor1516" : {
+                    "nodetype" : "optional",
+                    "module" : "SNMP-REPEATER-MIB",
+                    "description" :
+                        """Implementation of this optional group is
+recommended for systems which have the
+instrumentation to do performance monitoring.""",
+                },
+                "snmpRptrGrpAddrTrack1368" : {
+                    "nodetype" : "optional",
+                    "module" : "SNMP-REPEATER-MIB",
+                    "description" :
+                        """Implementation of this group is
+recommended for systems which have
+the necessary instrumentation.""",
+                },
+            }, # requires
+        }, # compliance
+        "snmpRptrModComplRFC1516" : {
+            "nodetype" : "compliance",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.5.1.1.2",
+            "status" : "deprecated",
+            "description" :
+                """********* THIS COMPLIANCE IS DEPRECATED **********
+
+Compliance for RFC 1516 and for backwards
+compatibility with single-repeater,
+10Mb/s-only implementations.""",
+            "requires" : {
+                "snmpRptrGrpBasic1516" : {
+                    "nodetype" : "mandatory",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "snmpRptrGrpMonitor1516" : {
+                    "nodetype" : "optional",
+                    "module" : "SNMP-REPEATER-MIB",
+                    "description" :
+                        """Implementation of this optional group is
+recommended for systems which have the
+instrumentation to do performance monitoring.""",
+                },
+                "snmpRptrGrpAddrTrack1516" : {
+                    "nodetype" : "optional",
+                    "module" : "SNMP-REPEATER-MIB",
+                    "description" :
+                        """Implementation of this group is
+recommended for systems which have
+the necessary instrumentation.""",
+                },
+            }, # requires
+        }, # compliance
+        "snmpRptrModCompl" : {
+            "nodetype" : "compliance",
+            "moduleName" : "SNMP-REPEATER-MIB",
+            "oid" : "1.3.6.1.2.1.22.5.1.1.3",
+            "status" : "current",
+            "description" :
+                """Compliance for the multi-segment version of the
+MIB module for a system with one or more
+repeater-units.""",
+            "requires" : {
+                "snmpRptrGrpBasic" : {
+                    "nodetype" : "mandatory",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "snmpRptrGrpMonitor" : {
+                    "nodetype" : "mandatory",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "snmpRptrGrpAddrTrack" : {
+                    "nodetype" : "mandatory",
+                    "module" : "SNMP-REPEATER-MIB"
+                },
+                "snmpRptrGrpMonitor100" : {
+                    "nodetype" : "optional",
+                    "module" : "SNMP-REPEATER-MIB",
+                    "description" :
+                        """Implementation of this group is
+mandatory for managed systems which
+contain 100Mb/s repeaters.""",
+                },
+                "snmpRptrGrpMonitor100w64" : {
+                    "nodetype" : "optional",
+                    "module" : "SNMP-REPEATER-MIB",
+                    "description" :
+                        """Implementation of this group is
+mandatory for managed systems which
+contain 100Mb/s repeaters and which
+can support Counter64.""",
+                },
+                "snmpRptrGrpExtAddrTrack" : {
+                    "nodetype" : "optional",
+                    "module" : "SNMP-REPEATER-MIB",
+                    "description" :
+                        """Implementation of this group is
+recommended for systems which have
+the necessary instrumentation to track
+MAC addresses of multiple DTEs attached
+to a single repeater port.""",
+                },
+                "snmpRptrGrpRptrAddrSearch" : {
+                    "nodetype" : "optional",
+                    "module" : "SNMP-REPEATER-MIB",
+                    "description" :
+                        """Implementation of this group is
+recommended for systems which allow
+read-write access and which have
+the necessary instrumentation to
+search all incoming data streams
+for a particular MAC address.""",
+                },
+                "snmpRptrGrpTopNPort" : {
+                    "nodetype" : "optional",
+                    "module" : "SNMP-REPEATER-MIB",
+                    "description" :
+                        """Implementation of this group is
+recommended for systems which have
+the necessary resources to support
+TopN statistics reporting.""",
+                },
+            }, # requires
+        }, # compliance
+    }, # compliances
+
+}