logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/ATM-TC-MIB.dic

@@ -0,0 +1,914 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python ATM-TC-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/ATM-TC-MIB"
+
+MIB = {
+    "moduleName" : "ATM-TC-MIB",
+
+    "ATM-TC-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF AToMMIB Working Group""",
+        "contact" : 
+            """          Michael Noto
+Postal:  3Com Corporation
+         5400 Bayfront Plaza, M/S 3109
+         Santa Clara, CA 95052
+         USA
+Tel:     +1 408 326 2218
+E-mail:  mike_noto@3com.com
+
+         Ethan Mickey Spiegel
+Postal:  Cisco Systems
+         170 W. Tasman Dr.
+         San Jose, CA 95134
+         USA
+Tel:     +1 408 526 6408
+E-mail:  mspiegel@cisco.com
+
+         Kaj Tesink
+Postal:  Bellcore
+         331 Newman Springs Road
+         Red Bank, NJ 07701
+         USA
+Tel:     +1 732 758 5254
+Fax:     +1 732 758 4177
+E-mail:  kaj@bellcore.com""",
+        "description" :
+            """This MIB Module provides Textual Conventions
+and OBJECT-IDENTITY Objects to be used by
+ATM systems.""",
+        "revisions" : (
+            {
+                "date" : "1998-10-19 02:00",
+                "description" :
+                    """[Revision added by libsmi due to a LAST-UPDATED clause.]""",
+            },
+        ),
+        "identity node" : "atmTCMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "TimeTicks"},
+        {"module" : "SNMPv2-SMI", "name" : "mib-2"},
+        {"module" : "SNMPv2-TC", "name" : "TEXTUAL-CONVENTION"},
+    ),
+
+    "typedefs" : {
+        "AtmAddr" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "40"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "40"
+            },
+            "format" : "1x",
+            "description" :
+                """An ATM address. The semantics are implied by
+the length. The address types are: - no
+address (0 octets) - E.164 (8 octets) - NSAP
+(20 octets) In addition, when subaddresses
+are used the AtmAddr may represent the
+concatenation of address and subaddress. The
+associated address types are: - E.164, E.164
+(16 octets) - E.164, NSAP (28 octets) - NSAP,
+NSAP (40 octets) Address lengths other than
+defined in this definition imply address
+types defined elsewhere.  Note: The E.164
+address is encoded in BCD format.""",
+        },
+        "AtmConnCastType" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "p2p" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "p2mpRoot" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "p2mpLeaf" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "description" :
+                """The type of topology of a connection (point-
+to-point, point-to-multipoint). In the case
+of point-to-multipoint, the orientation of
+this VPL or VCL in the connection.
+On a host:
+- p2mpRoot indicates that the host
+  is the root of the p2mp connection.
+- p2mpLeaf indicates that the host
+  is a leaf of the p2mp connection.
+On a switch interface:
+- p2mpRoot indicates that cells received
+  by the switching fabric from the interface
+  are from the root of the p2mp connection.
+- p2mpLeaf indicates that cells transmitted
+  to the interface from the switching fabric
+  are to the leaf of the p2mp connection.""",
+        },
+        "AtmConnKind" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "pvc" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "svcIncoming" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "svcOutgoing" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "spvcInitiator" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "spvcTarget" : {
+                "nodetype" : "namednumber",
+                "number" : "5"
+            },
+            "description" :
+                """The type of call control used for an ATM
+connection at a particular interface. The use
+is as follows:
+   pvc(1)
+      Virtual link of a PVC. Should not be
+      used for an PVC/SVC (i.e., Soft PVC)
+      crossconnect.
+   svcIncoming(2)
+      Virtual link established after a
+      received signaling request to setup
+      an SVC.
+   svcOutgoing(3)
+      Virtual link established after a
+      transmitted or forwarded signaling
+      request to setup an SVC.
+   spvcInitiator(4)
+      Virtual link at the PVC side of an
+      SVC/PVC crossconnect, where the
+      switch is the initiator of the Soft PVC
+      setup.
+   spvcTarget(5)
+      Virtual link at the PVC side of an
+      SVC/PVC crossconnect, where the
+      switch is the target of the Soft PVC
+      setup.
+
+For PVCs, a pvc virtual link is always cross-
+connected to a pvc virtual link.
+
+For SVCs, an svcIncoming virtual link is always cross-
+connected to an svcOutgoing virtual link.
+
+For Soft PVCs, an spvcInitiator is either cross-connected to
+an svcOutgoing or an spvcTarget, and an spvcTarget is either
+cross-connected to an svcIncoming or an spvcInitiator.""",
+        },
+        "AtmIlmiNetworkPrefix" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "8",
+                "max" : "8"
+            },
+            {
+                "min" : "13",
+                "max" : "13"
+            },
+            ],
+            "range" : {
+                "min" : "8",
+                "max" : "13"
+            },
+            "description" :
+                """A network prefix used for ILMI address
+registration.  In the case of ATM endsystem
+addresses (AESAs), the network prefix is the first
+13 octets of the address which includes the AFI,
+IDI, and HO-DSP fields.  In the case of native
+E.164 addresses, the network prefix is the entire
+E.164 address encoded in 8 octets, as if it were
+an E.164 IDP in an ATM endsystem address
+structure.""",
+            "reference" :
+                """ATM Forum, Integrated Local Management Interface
+(ILMI) Specification, Version 4.0,
+af-ilmi-0065.000, September 1996, Section 9
+ATM Forum, ATM User-Network Interface Signalling
+Specification, Version 4.0 (UNI 4.0),
+af-sig-0061.000, June 1996, Section 3""",
+        },
+        "AtmInterfaceType" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "other" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "autoConfig" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "ituDss2" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "atmfUni3Dot0" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "atmfUni3Dot1" : {
+                "nodetype" : "namednumber",
+                "number" : "5"
+            },
+            "atmfUni4Dot0" : {
+                "nodetype" : "namednumber",
+                "number" : "6"
+            },
+            "atmfIispUni3Dot0" : {
+                "nodetype" : "namednumber",
+                "number" : "7"
+            },
+            "atmfIispUni3Dot1" : {
+                "nodetype" : "namednumber",
+                "number" : "8"
+            },
+            "atmfIispUni4Dot0" : {
+                "nodetype" : "namednumber",
+                "number" : "9"
+            },
+            "atmfPnni1Dot0" : {
+                "nodetype" : "namednumber",
+                "number" : "10"
+            },
+            "atmfBici2Dot0" : {
+                "nodetype" : "namednumber",
+                "number" : "11"
+            },
+            "atmfUniPvcOnly" : {
+                "nodetype" : "namednumber",
+                "number" : "12"
+            },
+            "atmfNniPvcOnly" : {
+                "nodetype" : "namednumber",
+                "number" : "13"
+            },
+            "description" :
+                """The connection setup procedures used for the
+identified interface.
+
+Other: Connection setup procedures other than
+   those listed below.
+Auto-configuration:
+   Indicates that the connection setup
+   procedures are to be determined dynamically,
+   or that determination has not yet been
+   completed. One such mechanism is via ATM
+   Forum ILMI auto-configuration procedures.
+
+ITU-T DSS2:
+-  ITU-T Recommendation Q.2931, Broadband
+   Integrated Service Digital Network (B-ISDN)
+   Digital Subscriber Signalling System No.2
+   (DSS2) User-Network Interface (UNI) Layer 3
+   Specification for Basic Call/Connection
+   Control (September 1994)
+-  ITU-T Draft Recommendation Q.2961,
+   B-ISDN DSS 2 Support of Additional Traffic
+   Parameters (May 1995)
+
+-  ITU-T Draft Recommendation Q.2971,
+   B-ISDN DSS 2 User Network Interface Layer 3
+   Specification for Point-to-multipoint
+   Call/connection Control (May 1995)
+
+ATM Forum UNI 3.0:
+   ATM Forum, ATM User-Network Interface,
+   Version 3.0 (UNI 3.0) Specification,
+   (1994).
+
+ATM Forum UNI 3.1:
+   ATM Forum, ATM User-Network Interface,
+   Version 3.1 (UNI 3.1) Specification,
+   (November 1994).
+
+ATM Forum UNI Signalling 4.0:
+   ATM Forum, ATM User-Network Interface (UNI)
+   Signalling Specification Version 4.0,
+   af-sig-0061.000 (June 1996).
+
+ATM Forum IISP (based on UNI 3.0 or UNI 3.1) :
+   Interim Inter-switch Signaling Protocol
+   (IISP) Specification, Version 1.0,
+   af-pnni-0026.000, (December 1994).
+
+ATM Forum PNNI 1.0 :
+   ATM Forum, Private Network-Network Interface
+   Specification, Version 1.0, af-pnni-0055.000,
+   (March 1996).
+ATM Forum B-ICI:
+   ATM Forum, B-ICI Specification, Version 2.0,
+   af-bici-0013.002, (November 1995).
+
+ATM Forum UNI PVC Only:
+   An ATM Forum compliant UNI with the
+   signalling disabled.
+ATM Forum NNI PVC Only:
+   An ATM Forum compliant NNI with the
+   signalling disabled.""",
+        },
+        "AtmServiceCategory" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "other" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "cbr" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "rtVbr" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "nrtVbr" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "abr" : {
+                "nodetype" : "namednumber",
+                "number" : "5"
+            },
+            "ubr" : {
+                "nodetype" : "namednumber",
+                "number" : "6"
+            },
+            "description" :
+                """The service category for a connection.""",
+            "reference" :
+                """ATM Forum Traffic Management Specification,
+Version 4.0, af-tm-0056.000, June 1996.""",
+        },
+        "AtmSigDescrParamIndex" : {
+            "basetype" : "Integer32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "2147483647"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "2147483647"
+            },
+            "description" :
+                """The value of this object identifies a row in the
+atmSigDescrParamTable. The value 0 signifies that
+none of the signalling parameters defined in the
+atmSigDescrParamTable are applicable.""",
+        },
+        "AtmTrafficDescrParamIndex" : {
+            "basetype" : "Integer32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "2147483647"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "2147483647"
+            },
+            "description" :
+                """The value of this object identifies a row in the
+atmTrafficDescrParamTable.  The value 0 signifies
+that no row has been identified.""",
+        },
+        "AtmVcIdentifier" : {
+            "basetype" : "Integer32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "65535"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "65535"
+            },
+            "description" :
+                """The VCI value for a VCL. The maximum VCI value
+cannot exceed the value allowable by
+atmInterfaceMaxVciBits defined in ATM-MIB.""",
+        },
+        "AtmVpIdentifier" : {
+            "basetype" : "Integer32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "4095"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "4095"
+            },
+            "description" :
+                """The VPI value for a VPL or VCL. The value VPI=0
+is only allowed for a VCL. For ATM UNIs supporting
+VPCs the VPI value ranges from 0 to 255.  The VPI
+value 0 is supported for ATM UNIs conforming to
+the ATM Forum UNI 4.0 Annex 8 (Virtual UNIs)
+specification. For ATM UNIs supporting VCCs the
+VPI value ranges from 0 to 255.  For ATM NNIs the
+VPI value ranges from 0 to 4095.  The maximum VPI
+value cannot exceed the value allowable by
+atmInterfaceMaxVpiBits defined in ATM-MIB.""",
+        },
+        "AtmVorXAdminStatus" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "up" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "down" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "description" :
+                """The value determines the desired administrative
+status of a virtual link or cross-connect. The up
+and down states indicate that the traffic flow is
+enabled or disabled respectively on the virtual
+link or cross-connect.""",
+        },
+        "AtmVorXLastChange" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "parent module" : {
+                "name" : "SNMPv2-SMI",
+                "type" : "TimeTicks",
+            },
+            "description" :
+                """The value of MIB II's sysUpTime at the time a
+virtual link or cross-connect entered its current
+operational state. If the current state was
+entered prior to the last re-initialization of the
+agent then this object contains a zero value.""",
+        },
+        "AtmVorXOperStatus" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "up" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "down" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "unknown" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "description" :
+                """The value determines the operational status of a
+virtual link or cross-connect. The up and down
+states indicate that the traffic flow is enabled
+or disabled respectively on the virtual link or
+cross-connect. The unknown state indicates that
+the state of it cannot be determined. The state
+will be down or unknown if the supporting ATM
+interface(s) is down or unknown respectively.""",
+        },
+    }, # typedefs
+
+    "nodes" : {
+        "atmTrafficDescriptorTypes" : {
+            "nodetype" : "node",
+            "moduleName" : "ATM-TC-MIB",
+            "oid" : "1.3.6.1.2.1.37.1.1",
+        }, # node
+        "atmNoTrafficDescriptor" : {
+            "nodetype" : "node",
+            "moduleName" : "ATM-TC-MIB",
+            "oid" : "1.3.6.1.2.1.37.1.1.1",
+            "status" : "deprecated",
+            "description" :
+                """This identifies the no ATM traffic
+descriptor type.  Parameters 1, 2, 3, 4,
+and 5 are not used.  This traffic descriptor
+type can be used for best effort traffic.""",
+        }, # node
+        "atmNoClpNoScr" : {
+            "nodetype" : "node",
+            "moduleName" : "ATM-TC-MIB",
+            "oid" : "1.3.6.1.2.1.37.1.1.2",
+            "status" : "current",
+            "description" :
+                """This traffic descriptor type is for no CLP
+and no Sustained Cell Rate.  The use of the
+parameter vector for this type:
+Parameter 1: peak cell rate in cells/second
+             for CLP=0+1 traffic
+Parameter 2: not used
+Parameter 3: not used
+Parameter 4: not used
+Parameter 5: not used.""",
+            "reference" :
+                """ATM Forum,ATM User-Network Interface,
+Version 3.0 (UNI 3.0) Specification, 1994.
+ATM Forum, ATM User-Network Interface,
+Version 3.1 (UNI 3.1) Specification,
+November 1994.""",
+        }, # node
+        "atmClpNoTaggingNoScr" : {
+            "nodetype" : "node",
+            "moduleName" : "ATM-TC-MIB",
+            "oid" : "1.3.6.1.2.1.37.1.1.3",
+            "status" : "deprecated",
+            "description" :
+                """This traffic descriptor is for CLP without
+tagging and no Sustained Cell Rate.  The use
+of the parameter vector for this type:
+Parameter 1: peak cell rate in cells/second
+             for CLP=0+1 traffic
+Parameter 2: peak cell rate in cells/second
+             for CLP=0 traffic
+Parameter 3: not used
+Parameter 4: not used
+Parameter 5: not used.""",
+        }, # node
+        "atmClpTaggingNoScr" : {
+            "nodetype" : "node",
+            "moduleName" : "ATM-TC-MIB",
+            "oid" : "1.3.6.1.2.1.37.1.1.4",
+            "status" : "deprecated",
+            "description" :
+                """This traffic descriptor is for CLP with
+tagging and no Sustained Cell Rate.  The use
+of the parameter vector for this type:
+Parameter 1: peak cell rate in cells/second
+             for CLP=0+1 traffic
+Parameter 2: peak cell rate in cells/second
+             for CLP=0 traffic, excess
+             tagged as CLP=1
+Parameter 3: not used
+Parameter 4: not used
+Parameter 5: not used.""",
+        }, # node
+        "atmNoClpScr" : {
+            "nodetype" : "node",
+            "moduleName" : "ATM-TC-MIB",
+            "oid" : "1.3.6.1.2.1.37.1.1.5",
+            "status" : "current",
+            "description" :
+                """This traffic descriptor type is for no CLP
+with Sustained Cell Rate.  The use of the
+parameter vector for this type:
+Parameter 1: peak cell rate in cells/second
+             for CLP=0+1 traffic
+Parameter 2: sustainable cell rate in cells/second
+             for CLP=0+1 traffic
+Parameter 3: maximum burst size in cells
+Parameter 4: not used
+Parameter 5: not used.""",
+            "reference" :
+                """ATM Forum,ATM User-Network Interface,
+Version 3.0 (UNI 3.0) Specification, 1994.
+ATM Forum, ATM User-Network Interface,
+Version 3.1 (UNI 3.1) Specification,
+November 1994.""",
+        }, # node
+        "atmClpNoTaggingScr" : {
+            "nodetype" : "node",
+            "moduleName" : "ATM-TC-MIB",
+            "oid" : "1.3.6.1.2.1.37.1.1.6",
+            "status" : "current",
+            "description" :
+                """This traffic descriptor type is for CLP with
+Sustained Cell Rate and no tagging.  The use
+of the parameter vector for this type:
+Parameter 1: peak cell rate in cells/second
+             for CLP=0+1 traffic
+Parameter 2: sustainable cell rate in cells/second
+             for CLP=0 traffic
+Parameter 3: maximum burst size in cells
+Parameter 4: not used
+Parameter 5: not used.""",
+            "reference" :
+                """ATM Forum,ATM User-Network Interface,
+Version 3.0 (UNI 3.0) Specification, 1994.
+ATM Forum, ATM User-Network Interface,
+Version 3.1 (UNI 3.1) Specification,
+November 1994.""",
+        }, # node
+        "atmClpTaggingScr" : {
+            "nodetype" : "node",
+            "moduleName" : "ATM-TC-MIB",
+            "oid" : "1.3.6.1.2.1.37.1.1.7",
+            "status" : "current",
+            "description" :
+                """This traffic descriptor type is for CLP with
+tagging and Sustained Cell Rate.  The use of
+the parameter vector for this type:
+Parameter 1: peak cell rate in cells/second
+             for CLP=0+1 traffic
+Parameter 2: sustainable cell rate in cells/second
+             for CLP=0 traffic, excess tagged as
+             CLP=1
+Parameter 3: maximum burst size in cells
+Parameter 4: not used
+Parameter 5: not used.""",
+            "reference" :
+                """ATM Forum,ATM User-Network Interface,
+Version 3.0 (UNI 3.0) Specification, 1994.
+ATM Forum, ATM User-Network Interface,
+Version 3.1 (UNI 3.1) Specification,
+November 1994.""",
+        }, # node
+        "atmClpNoTaggingMcr" : {
+            "nodetype" : "node",
+            "moduleName" : "ATM-TC-MIB",
+            "oid" : "1.3.6.1.2.1.37.1.1.8",
+            "status" : "current",
+            "description" :
+                """This traffic descriptor type is for CLP with
+Minimum Cell Rate and no tagging.  The use of
+the parameter vector for this type:
+Parameter 1: peak cell rate in cells/second
+             for CLP=0+1 traffic
+Parameter 2: CDVT in tenths of microseconds
+Parameter 3: minimum cell rate in cells/second
+Parameter 4: unused
+Parameter 5: unused.""",
+            "reference" :
+                """ATM Forum,ATM User-Network Interface,
+Version 3.0 (UNI 3.0) Specification, 1994.
+ATM Forum, ATM User-Network Interface,
+Version 3.1 (UNI 3.1) Specification,
+November 1994.""",
+        }, # node
+        "atmClpTransparentNoScr" : {
+            "nodetype" : "node",
+            "moduleName" : "ATM-TC-MIB",
+            "oid" : "1.3.6.1.2.1.37.1.1.9",
+            "status" : "current",
+            "description" :
+                """This traffic descriptor type is for the CLP-
+transparent model and no Sustained Cell Rate.
+The use of the parameter vector for this type:
+Parameter 1: peak cell rate in cells/second
+             for CLP=0+1 traffic
+Parameter 2: CDVT in tenths of microseconds
+Parameter 3: not used
+Parameter 4: not used
+Parameter 5: not used.
+
+This traffic descriptor type is applicable to
+connections following the CBR.1 conformance
+definition.
+
+Connections specifying this traffic descriptor
+type will be rejected at UNI 3.0 or UNI 3.1
+interfaces.  For a similar traffic descriptor
+type that can be accepted at UNI 3.0 and
+UNI 3.1 interfaces, see atmNoClpNoScr.""",
+            "reference" :
+                """ATM Forum,ATM User-Network Interface,
+Version 3.0 (UNI 3.0) Specification, 1994.
+ATM Forum, ATM User-Network Interface,
+Version 3.1 (UNI 3.1) Specification,
+November 1994.
+ATM Forum, Traffic Management Specification,
+Version 4.0, af-tm-0056.000, June 1996.""",
+        }, # node
+        "atmClpTransparentScr" : {
+            "nodetype" : "node",
+            "moduleName" : "ATM-TC-MIB",
+            "oid" : "1.3.6.1.2.1.37.1.1.10",
+            "status" : "current",
+            "description" :
+                """This traffic descriptor type is for the CLP-
+transparent model with Sustained Cell Rate.
+The use of the parameter vector for this type:
+Parameter 1: peak cell rate in cells/second
+             for CLP=0+1 traffic
+Parameter 2: sustainable cell rate in cells/second
+             for CLP=0+1 traffic
+Parameter 3: maximum burst size in cells
+Parameter 4: CDVT in tenths of microseconds
+Parameter 5: not used.
+
+This traffic descriptor type is applicable to
+connections following the VBR.1 conformance
+definition.
+Connections specifying this traffic descriptor
+type will be rejected at UNI 3.0 or UNI 3.1
+interfaces.  For a similar traffic descriptor
+type that can be accepted at UNI 3.0 and
+UNI 3.1 interfaces, see atmNoClpScr.""",
+            "reference" :
+                """ATM Forum,ATM User-Network Interface,
+Version 3.0 (UNI 3.0) Specification, 1994.
+ATM Forum, ATM User-Network Interface,
+Version 3.1 (UNI 3.1) Specification,
+November 1994.
+ATM Forum, Traffic Management Specification,
+Version 4.0, af-tm-0056.000, June 1996.""",
+        }, # node
+        "atmNoClpTaggingNoScr" : {
+            "nodetype" : "node",
+            "moduleName" : "ATM-TC-MIB",
+            "oid" : "1.3.6.1.2.1.37.1.1.11",
+            "status" : "current",
+            "description" :
+                """This traffic descriptor type is for no CLP
+with tagging and no Sustained Cell Rate.  The
+use of the parameter vector for this type:
+Parameter 1: peak cell rate in cells/second
+             for CLP=0+1 traffic
+Parameter 2: CDVT in tenths of microseconds
+Parameter 3: not used
+Parameter 4: not used
+Parameter 5: not used.
+
+This traffic descriptor type is applicable to
+connections following the UBR.2 conformance
+definition .""",
+            "reference" :
+                """ATM Forum,ATM User-Network Interface,
+Version 3.0 (UNI 3.0) Specification, 1994.
+ATM Forum, ATM User-Network Interface,
+Version 3.1 (UNI 3.1) Specification,
+November 1994.
+ATM Forum, Traffic Management Specification,
+Version 4.0, af-tm-0056.000, June 1996.""",
+        }, # node
+        "atmNoClpNoScrCdvt" : {
+            "nodetype" : "node",
+            "moduleName" : "ATM-TC-MIB",
+            "oid" : "1.3.6.1.2.1.37.1.1.12",
+            "status" : "current",
+            "description" :
+                """This traffic descriptor type is for no CLP
+and no Sustained Cell Rate.  The use of the
+parameter vector for this type:
+Parameter 1: peak cell rate in cells/second
+             for CLP=0+1 traffic
+Parameter 2: CDVT in tenths of microseconds
+Parameter 3: not used
+Parameter 4: not used
+Parameter 5: not used.
+
+This traffic descriptor type is applicable to
+CBR connections following the UNI 3.0/3.1
+conformance definition for PCR CLP=0+1.
+These CBR connections differ from CBR.1
+connections in that the CLR objective
+applies only to the CLP=0 cell flow.
+
+This traffic descriptor type is also
+applicable to connections following the UBR.1
+conformance definition.""",
+            "reference" :
+                """ATM Forum,ATM User-Network Interface,
+Version 3.0 (UNI 3.0) Specification, 1994.
+ATM Forum, ATM User-Network Interface,
+Version 3.1 (UNI 3.1) Specification,
+November 1994.
+ATM Forum, Traffic Management Specification,
+Version 4.0, af-tm-0056.000, June 1996.""",
+        }, # node
+        "atmNoClpScrCdvt" : {
+            "nodetype" : "node",
+            "moduleName" : "ATM-TC-MIB",
+            "oid" : "1.3.6.1.2.1.37.1.1.13",
+            "status" : "current",
+            "description" :
+                """This traffic descriptor type is for no CLP
+with Sustained Cell Rate.  The use of the
+parameter vector for this type:
+Parameter 1: peak cell rate in cells/second
+             for CLP=0+1 traffic
+Parameter 2: sustainable cell rate in cells/second
+             for CLP=0+1 traffic
+Parameter 3: maximum burst size in cells
+Parameter 4: CDVT in tenths of microseconds
+Parameter 5: not used.
+
+This traffic descriptor type is applicable
+to VBR connections following the UNI 3.0/3.1
+conformance definition for PCR CLP=0+1 and
+SCR CLP=0+1.  These VBR connections
+differ from VBR.1 connections in that
+the CLR objective applies only to the CLP=0
+cell flow.""",
+            "reference" :
+                """ATM Forum,ATM User-Network Interface,
+Version 3.0 (UNI 3.0) Specification, 1994.
+ATM Forum, ATM User-Network Interface,
+Version 3.1 (UNI 3.1) Specification,
+November 1994.
+ATM Forum, Traffic Management Specification,
+Version 4.0, af-tm-0056.000, June 1996.""",
+        }, # node
+        "atmClpNoTaggingScrCdvt" : {
+            "nodetype" : "node",
+            "moduleName" : "ATM-TC-MIB",
+            "oid" : "1.3.6.1.2.1.37.1.1.14",
+            "status" : "current",
+            "description" :
+                """This traffic descriptor type is for CLP with
+Sustained Cell Rate and no tagging.  The use
+of the parameter vector for this type:
+Parameter 1: peak cell rate in cells/second
+             for CLP=0+1 traffic
+Parameter 2: sustainable cell rate in cells/second
+             for CLP=0 traffic
+Parameter 3: maximum burst size in cells
+Parameter 4: CDVT in tenths of microseconds
+Parameter 5: not used.
+
+This traffic descriptor type is applicable to
+connections following the VBR.2 conformance
+definition.""",
+            "reference" :
+                """ATM Forum,ATM User-Network Interface,
+Version 3.0 (UNI 3.0) Specification, 1994.
+ATM Forum, ATM User-Network Interface,
+Version 3.1 (UNI 3.1) Specification,
+November 1994.
+ATM Forum, Traffic Management Specification,
+Version 4.0, af-tm-0056.000, June 1996.""",
+        }, # node
+        "atmClpTaggingScrCdvt" : {
+            "nodetype" : "node",
+            "moduleName" : "ATM-TC-MIB",
+            "oid" : "1.3.6.1.2.1.37.1.1.15",
+            "status" : "current",
+            "description" :
+                """This traffic descriptor type is for CLP with
+tagging and Sustained Cell Rate.  The use of
+the parameter vector for this type:
+Parameter 1: peak cell rate in cells/second
+             for CLP=0+1 traffic
+Parameter 2: sustainable cell rate in cells/second
+             for CLP=0 traffic, excess tagged as
+             CLP=1
+Parameter 3: maximum burst size in cells
+Parameter 4: CDVT in tenths of microseconds
+Parameter 5: not used.
+
+This traffic descriptor type is applicable to
+connections following the VBR.3 conformance
+definition.""",
+            "reference" :
+                """ATM Forum,ATM User-Network Interface,
+Version 3.0 (UNI 3.0) Specification, 1994.
+ATM Forum, ATM User-Network Interface,
+Version 3.1 (UNI 3.1) Specification,
+November 1994.
+ATM Forum, Traffic Management Specification,
+Version 4.0, af-tm-0056.000, June 1996.""",
+        }, # node
+        "atmTCMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "ATM-TC-MIB",
+            "oid" : "1.3.6.1.2.1.37.3",
+            "status" : "current",
+        }, # node
+        "atmObjectIdentities" : {
+            "nodetype" : "node",
+            "moduleName" : "ATM-TC-MIB",
+            "oid" : "1.3.6.1.2.1.37.3.1",
+        }, # node
+    }, # nodes
+
+}