logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/SCSI-MIB.dic

@@ -0,0 +1,3804 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python SCSI-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/SCSI-MIB"
+
+MIB = {
+    "moduleName" : "SCSI-MIB",
+
+    "SCSI-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF""",
+        "contact" : 
+            """
+Michele Hallak-Stamler
+
+
+
+Sanrad Intelligent Network
+27 Habarzel Street
+Tel Aviv, Israel
+Phone: +972 3 7674809
+E-mail: michele@sanrad.com
+
+Yaron Lederman
+Siliquent Technologies Ltd.
+21 Etzel Street
+Ramat Gan, Israel
+Phone: +972 54 5308833
+E-mail: yaronled@bezeqint.net
+
+Mark Bakke
+Postal: Cisco Systems, Inc
+7900 International Drive, Suite 400
+Bloomington, MN
+USA 55425
+E-mail: mbakke@cisco.com
+
+Marjorie Krueger
+Postal: Hewlett-Packard
+8000 Foothills Blvd.
+Roseville, CA 95747
+E-mail: marjorie_krueger@hp.com
+
+Keith McCloghrie
+Cisco Systems, Inc.
+Postal: 170 West Tasman Drive
+San Jose, CA USA 95134
+Phone: +1 408 526-5260
+E-mail: kzm@cisco.com""",
+        "description" :
+            """The SCSI MIB Module.
+Copyright (C) The Internet Society (2006).  This version of
+this MIB module is part of RFC 4455; see the RFC
+itself for full legal notices.""",
+        "revisions" : (
+            {
+                "date" : "2006-03-30 00:00",
+                "description" :
+                    """ Initial version published as RFC 4455.""",
+            },
+        ),
+        "identity node" : "scsiMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "NOTIFICATION-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "SNMPv2-SMI", "name" : "Unsigned32"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter32"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter64"},
+        {"module" : "SNMPv2-SMI", "name" : "Gauge32"},
+        {"module" : "SNMPv2-SMI", "name" : "mib-2"},
+        {"module" : "SNMPv2-TC", "name" : "TEXTUAL-CONVENTION"},
+        {"module" : "SNMPv2-TC", "name" : "TimeStamp"},
+        {"module" : "SNMPv2-TC", "name" : "TruthValue"},
+        {"module" : "SNMPv2-TC", "name" : "RowStatus"},
+        {"module" : "SNMPv2-TC", "name" : "RowPointer"},
+        {"module" : "SNMPv2-TC", "name" : "AutonomousType"},
+        {"module" : "SNMPv2-TC", "name" : "StorageType"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "SNMPv2-CONF", "name" : "NOTIFICATION-GROUP"},
+        {"module" : "SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+    ),
+
+    "typedefs" : {
+        "ScsiLUN" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "2",
+                "max" : "2"
+            },
+            {
+                "min" : "8",
+                "max" : "8"
+            },
+            ],
+            "range" : {
+                "min" : "2",
+                "max" : "8"
+            },
+            "description" :
+                """This textual convention represents a SCSI Logical Unit
+Number (LUN).  The format of a LUN is documented in Tables
+A.2 and A.3 of SAM-2 [SAM2].""",
+            "reference" :
+                """SCSI Architecture Model-2 (SAM-2), ANSI INCITS 366-2003,
+T10 Project 1157-D, 12 September 2002 - Annex A [SAM2]""",
+        },
+        "ScsiIndexValue" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "1",
+                "max" : "4294967295"
+            },
+            ],
+            "range" : {
+                "min" : "1",
+                "max" : "4294967295"
+            },
+            "format" : "d",
+            "description" :
+                """An arbitrary integer value, greater than zero, for use
+as a unique index value.""",
+        },
+        "ScsiPortIndexValueOrZero" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "4294967295"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "4294967295"
+            },
+            "format" : "d",
+            "description" :
+                """This textual convention is an extension of the ScsiIndexValue
+convention.  The latter defines a greater than zero value used
+to identify an index.  This extension permits the additional
+value of zero and is applicable only to indices of SCSI port.
+Usage of the zero is object-specific and must therefore be
+defined as part of the description of any object that uses
+this syntax.  Examples of the usage of zero might include
+situations where the index was unknown, or when none or all
+indices need to be referenced.""",
+        },
+        "ScsiIndexValueOrZero" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "4294967295"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "4294967295"
+            },
+            "format" : "d",
+            "description" :
+                """This textual convention is an extension of the ScsiIndexValue
+convention.  The latter defines a greater than zero value used
+to identify an index.  This extension permits the additional
+value of zero.  Usage of the zero is object-specific and must
+therefore be defined as part of the description of any object
+that uses this syntax.  Examples of the usage of zero might
+include situations where index was unknown, or when none or
+all indices need to be referenced.""",
+        },
+        "ScsiIdentifier" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "262"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "262"
+            },
+            "description" :
+                """This textual convention represents a generic SCSI port
+identifier.
+The format depends on the transport used and is documented
+in Tables A.2 and A.3 of SAM-2 [SAM2].""",
+            "reference" :
+                """SCSI Architecture Model-2 (SAM-2), ANSI INCITS 366-2003,
+T10 Project 1157-D, 12 September 2002 - Annex A [SAM2]""",
+        },
+        "ScsiName" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "262"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "262"
+            },
+            "description" :
+                """This textual convention represents the name of a SCSI
+initiator device, a SCSI target device, a SCSI initiator port
+or a SCSI target port.
+The format depends on the transport used and is documented
+in Tables A.4 and A.5 of SAM-2 [SAM2].
+Every object defined using this syntax must define whether it
+is
+a) always used for a port,
+b) always used for a device, or
+c) the circumstances under which it is used for a port or
+device.""",
+            "reference" :
+                """SCSI Architecture Model-2 (SAM-2), ANSI INCITS 366-2003,
+T10 Project 1157-D, 12 September 2002 - Annex A [SAM2]""",
+        },
+        "ScsiLuNameOrZero" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "0"
+            },
+            {
+                "min" : "8",
+                "max" : "8"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "8"
+            },
+            "description" :
+                """This textual convention represents either the name of a SCSI
+logical unit or a zero-length string.  Objects defined with
+this syntax must specify the meaning of the zero-length
+string.
+The format of the name of a LU is defined as:
+- a zero-length octet string or
+- a string of eight bytes.""",
+            "reference" :
+                """SCSI Architecture Model-2 (SAM-2), ANSI INCITS 366-2003,
+T10 Project 1157-D, 12 September 2002 - Annex A [SAM2]""",
+        },
+        "ScsiDeviceOrPort" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "device" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "port" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "other" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "description" :
+                """This type specifies whether a particular configuration is
+applicable to a port or to a device.""",
+        },
+        "ScsiIdCodeSet" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "15"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "15"
+            },
+            "format" : "d",
+            "description" :
+                """This textual convention specifies the code set for the
+identifier contained in an Identification Descriptor returned
+in a logical unit's Device Identification Page, and is
+formatted as defined in T10 SPC-2 (see REFERENCE) Table 172 -
+Code Set""",
+            "reference" :
+                """ANSI - SCSI Primary Commands - 2 (SPC-2),
+ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
+Vital Product Data Parameters [SPC2]""",
+        },
+        "ScsiIdAssociation" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "3"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "3"
+            },
+            "format" : "d",
+            "description" :
+                """This textual convention specifies what the identifier is
+associated with (e.g., with the addressed physical/logical
+device or with a particular port) for the identifier
+contained in an Identification Descriptor returned in a
+logical unit's Device Identification Page, and is
+formatted as defined in T10 SPC-2 (see REFERENCE)
+Table 173 - Association.""",
+            "reference" :
+                """ANSI - SCSI Primary Commands - 2 (SPC-2),
+ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
+Vital Product Data Parameters [SPC2]""",
+        },
+        "ScsiIdType" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "15"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "15"
+            },
+            "format" : "d",
+            "description" :
+                """This textual convention specifies the type for the identifier
+contained in an Identification Descriptor returned in a
+
+
+
+logical unit's Device Identification Page, and is formatted
+as defined in T10 SPC-2 (see REFERENCE) table 174 - Identifier
+Type.""",
+            "reference" :
+                """ANSI - SCSI Primary Commands - 2 (SPC-2),
+ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
+Vital Product Data Parameters [SPC2]""",
+        },
+        "ScsiIdValue" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "255"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "255"
+            },
+            "description" :
+                """This textual convention represents an identifier.  The objects
+of type ScsiIdCodeSet, ScsiIdAssociation, ScsiIdType define
+together the format.
+The format is the same as contained in an Identification
+Descriptor returned in a logical unit's Device Identification
+Page, and is formatted as defined in T10 SPC-2
+(see REFERENCE).""",
+            "reference" :
+                """ANSI - SCSI Primary Commands - 2 (SPC-2),
+ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
+Vital Product Data Parameters [SPC2]""",
+        },
+        "ScsiHrSWInstalledIndexOrZero" : {
+            "basetype" : "Integer32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "2147483647"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "2147483647"
+            },
+            "format" : "d",
+            "description" :
+                """The index value for a software module's row in the Host
+Resources MIBs hrSWInstalledTable.  A zero value indicates
+that no row in the hrSWInstalledTable is applicable.""",
+            "reference" :
+                """hrSWInstalledTable is defined in the Host Resources MIB,
+[RFC2790].""",
+        },
+    }, # typedefs
+
+    "nodes" : {
+        "scsiMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139",
+            "status" : "current",
+        }, # node
+        "scsiNotifications" : {
+            "nodetype" : "node",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.0",
+        }, # node
+        "scsiNotificationsPrefix" : {
+            "nodetype" : "node",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.0.0",
+        }, # node
+        "scsiAdmin" : {
+            "nodetype" : "node",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.1",
+        }, # node
+        "scsiTransportTypes" : {
+            "nodetype" : "node",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.1.1",
+        }, # node
+        "scsiTransportOther" : {
+            "nodetype" : "node",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.1.1.1",
+            "status" : "current",
+            "description" :
+                """This identity identifies a transport that has no identity; it
+might happen because the transport is unknown or might not
+have been defined when this MIB module was created.""",
+        }, # node
+        "scsiTransportSPI" : {
+            "nodetype" : "node",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.1.1.2",
+            "status" : "current",
+            "description" :
+                """This identity identifies a parallel SCSI transport.""",
+            "reference" :
+                """T10 - SCSI Parallel Interface - 4 (SPI-4)
+- ANSI INCITS 362-2002 [SPI4]""",
+        }, # node
+        "scsiTransportFCP" : {
+            "nodetype" : "node",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.1.1.3",
+            "status" : "current",
+            "description" :
+                """This identity identifies a Fibre Channel Protocol for SCSI,
+Second Version.""",
+            "reference" :
+                """T10 - SCSI Fibre Channel Protocol - 2 (FCP-2)
+- ANSI INCITS 350-2003 [FCP2]""",
+        }, # node
+        "scsiTransportSRP" : {
+            "nodetype" : "node",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.1.1.4",
+            "status" : "current",
+            "description" :
+                """This identity identifies a protocol for transporting SCSI over
+Remote Direct Memory Access (RDMA) interfaces, e.g., InfiniBand
+(tm).""",
+            "reference" :
+                """T10 - SCSI RDMA Protocol (SRP)
+- ANSI INCITS 365-2002 [SRP].""",
+        }, # node
+        "scsiTransportISCSI" : {
+            "nodetype" : "node",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.1.1.5",
+            "status" : "current",
+            "description" :
+                """This identity identifies an iSCSI transport.""",
+            "reference" :
+                """IETF IPS WG - Internet Small Computer Systems Interface
+(iSCSI) [RFC3720] """,
+        }, # node
+        "scsiTransportSBP" : {
+            "nodetype" : "node",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.1.1.6",
+            "status" : "current",
+            "description" :
+                """This identity identifies the Serial Bus Protocol 3.""",
+            "reference" :
+                """T10 - Serial Bus Protocol 3 (SBP-3)
+- ANSI INCITS 375-2004 [SBP3].""",
+        }, # node
+        "scsiTransportSAS" : {
+            "nodetype" : "node",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.1.1.7",
+            "status" : "current",
+            "description" :
+                """This identity identifies the Serial Attach SCSI Protocol.""",
+            "reference" :
+                """T10 - Serial Attached SCSI - 1.1 (SAS - 1.1)
+- #1601-D Rev-10 [SAS-1.1].""",
+        }, # node
+        "scsiObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2",
+        }, # node
+        "scsiGeneral" : {
+            "nodetype" : "node",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1",
+        }, # node
+        "scsiInstanceTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.1",
+            "status" : "current",
+            "description" :
+                """A list of SCSI instances present on the system.
+The SCSI instance is the top-level entity, to which everything
+else belongs.  An SNMP agent could represent more than one
+instance if it represents either a stack of devices, or virtual
+partitions of a larger device, or a host running multiple SCSI
+implementations from different vendors.""",
+        }, # table
+        "scsiInstanceEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.1.1",
+            "status" : "current",
+            "linkage" : [
+                "scsiInstIndex",
+            ],
+            "description" :
+                """An entry (row) containing management information applicable to
+a particular SCSI instance.""",
+        }, # row
+        "scsiInstIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIndexValue"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This object represents an arbitrary integer used to uniquely
+identify a particular SCSI instance.""",
+        }, # column
+        "scsiInstAlias" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMP-FRAMEWORK-MIB",
+                        "type" : "SnmpAdminString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "79"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "79"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object represents an administrative string, configured by
+the administrator.  It can be a zero-length string.""",
+        }, # column
+        "scsiInstSoftwareIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiHrSWInstalledIndexOrZero"},
+            },
+            "access" : "readonly",
+            "description" :
+                """If this management instance corresponds to an installed
+software module, then this object's value is the value of the
+hrSWInstalledIndex of that module.  If there is no
+correspondence to an installed software module (or no module
+that has an hrSWInstalledIndex value), then the value of this
+object is zero.""",
+            "reference" :
+                """hrSWInstalledIndex is defined in the Host Resources MIB,
+[RFC2790].""",
+        }, # column
+        "scsiInstVendorVersion" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents a text string set by the manufacturer
+describing the version of this instance.  The format of this
+string is determined solely by the manufacturer and is for
+informational purposes only.  It is unrelated to the SCSI
+specification version numbers.""",
+        }, # column
+        "scsiInstScsiNotificationsEnable" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "default" : "true",
+            "description" :
+                """This object indicates whether notifications defined in this
+MIB module will be generated.""",
+        }, # column
+        "scsiInstStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "default" : "nonVolatile",
+            "description" :
+                """This object specifies the memory realization for
+this SCSI entity.
+Specifically, each row in the following tables:
+
+           scsiIntrDevTable
+           scsiDscTgtTable
+           scsiAuthorizedIntrTable
+           scsiLunMapTable
+
+has a StorageType as specified by the instance of
+this object that is INDEXed by the same value of
+scsiInstIndex.
+This value of this object is also used to indicate
+the persistence across reboots of writable values in
+its row of the scsiInstanceTable.
+Conceptual rows having the value 'permanent' need not
+allow write-access to any columnar objects in the row,
+nor to any object belonging to a table whose entry is
+INDEXed by the same value of scsiInstIndex.""",
+        }, # column
+        "scsiDeviceTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.2",
+            "status" : "current",
+            "description" :
+                """A list of SCSI devices contained in each of the SCSI manageable
+instances that this agent is reporting.""",
+        }, # table
+        "scsiDeviceEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.2.1",
+            "status" : "current",
+            "linkage" : [
+                "scsiInstIndex",
+                "scsiDeviceIndex",
+            ],
+            "description" :
+                """An entry (row) containing management information applicable to
+a particular SCSI device included in this SCSI manageable
+instance identifiable by the value of scsiInstIndex.""",
+        }, # row
+        "scsiDeviceIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIndexValue"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This object is an arbitrary integer used to uniquely identify
+a particular device within a particular SCSI instance.""",
+        }, # column
+        "scsiDeviceAlias" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMP-FRAMEWORK-MIB",
+                        "type" : "SnmpAdminString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "79"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "79"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object contains an administrative name for this device.
+If no name is assigned, the value of this object is the
+zero-length string.
+The StorageType of this object is specified by the instance
+of scsiInstStorageType that is INDEXed by the same value of
+scsiInstIndex.""",
+        }, # column
+        "scsiDeviceRole" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Bits",
+                    "target" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "initiator" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object determines whether this device is acting as a
+SCSI initiator device, or as a SCSI target device, or as both.""",
+        }, # column
+        "scsiDevicePortNumber" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents the number of ports contained in this
+device.""",
+        }, # column
+        "scsiPortTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.3",
+            "status" : "current",
+            "description" :
+                """A list of SCSI ports for each SCSI device in each instance.""",
+        }, # table
+        "scsiPortEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.3.1",
+            "status" : "current",
+            "linkage" : [
+                "scsiInstIndex",
+                "scsiDeviceIndex",
+                "scsiPortIndex",
+            ],
+            "description" :
+                """An entry (row) containing management information applicable to
+a particular SCSI port of a particular SCSI device in a
+particular SCSI instance.""",
+        }, # row
+        "scsiPortIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIndexValue"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """An arbitrary integer used to uniquely identify a particular
+port of a given device within a particular SCSI instance.""",
+        }, # column
+        "scsiPortRole" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Bits",
+                    "target" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "initiator" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object indicates whether this port is acting as a
+SCSI initiator port, or as a SCSI target port or as both.""",
+        }, # column
+        "scsiPortTransportPtr" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowPointer"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object is a pointer to the corresponding row in the
+scsiTransportTable.  This row contains information on the
+transport such as transport type and port name.""",
+        }, # column
+        "scsiPortBusyStatuses" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.3.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents the number of port busy statuses sent or
+received by this port.  Note: Initiator ports only receive busy
+status and SCSI target ports only send busy status.
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system.""",
+        }, # column
+        "scsiTransportTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.5",
+            "status" : "current",
+            "description" :
+                """This table contains the device transport-specific information
+for each transport connected to each device in
+scsiDeviceTable.""",
+        }, # table
+        "scsiTransportEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.5.1",
+            "status" : "current",
+            "linkage" : [
+                "scsiInstIndex",
+                "scsiDeviceIndex",
+                "scsiTransportIndex",
+            ],
+            "description" :
+                """An entry (row) containing parameters applicable to a transport
+used by a particular device of a particular SCSI manageable
+instance.""",
+        }, # row
+        "scsiTransportIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.5.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIndexValue"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """An arbitrary integer used to uniquely identify a particular
+transport within a given device within a particular SCSI
+instance.""",
+        }, # column
+        "scsiTransportType" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.5.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "AutonomousType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object identifies the transport type of this row of the
+transport table.  For example, if this object has the value
+scsiTransportFCP, then the identified transport is FCP.""",
+        }, # column
+        "scsiTransportPointer" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.5.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowPointer"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents a pointer to a conceptual row in a
+'transport' MIB module allowing a manager to get useful
+information for the transport described by this entry.
+For example, if the transport of this device is iSCSI, this
+object will point to the iSCSI Instance of the iSCSI MIB
+module.
+If there is no MIB for this transport, this object has the
+value 0.0.""",
+        }, # column
+        "scsiTransportDevName" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.1.5.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiName"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents the name of this device in one of the
+format(s) appropriate for this type of transport.""",
+        }, # column
+        "scsiInitiatorDevice" : {
+            "nodetype" : "node",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2",
+        }, # node
+        "scsiIntrDevTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.1",
+            "status" : "current",
+            "description" :
+                """This table contains information for each local SCSI initiator
+device in each instance.""",
+        }, # table
+        "scsiIntrDevEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.1.1",
+            "status" : "current",
+            "linkage" : [
+                "scsiInstIndex",
+                "scsiDeviceIndex",
+            ],
+            "description" :
+                """An entry (row) containing information applicable to a SCSI
+initiator device within a particular SCSI instance.""",
+        }, # row
+        "scsiIntrDevTgtAccessMode" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "unknown" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "autoEnable" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "manualEnable" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object controls whether or not a discovered SCSI target
+device is immediately authorized:
+    - autoEnable (2) means that when a SCSI initiator device
+    discovers a SCSI target device, it can use it immediately.
+    - manualEnable (3) means that the SCSI initiator device
+    must wait for an operator to set scsiIntrDscTgtConfigured
+    = true before it is authorized.
+The StorageType of this object is specified by the instance
+of scsiInstStorageType that is INDEXed by the same value of
+scsiInstIndex.""",
+        }, # column
+        "scsiIntrDevOutResets" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents the total number of times that this SCSI
+initiator device has issued
+- a LOGICAL UNIT RESET or TARGET RESET task management request,
+  or
+- any other SCSI transport protocol-specific action or event
+  that causes a Logical Unit Reset or a Hard Reset at one or
+  more SCSI target ports ([SAM2] chapters 5.9.6, 5.9.7).
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system.""",
+            "reference" :
+                """SCSI Architecture Model-2 (SAM-2), ANSI INCITS 366-2003,
+T10 Project 1157-D, 12 September 2002
+Chapters 5.9.6 & 5.9.7 [SAM2]""",
+        }, # column
+        "scsiIntrPortTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.2",
+            "status" : "current",
+            "description" :
+                """This table contains all the SCSI initiator ports for each
+local SCSI initiator or target/initiator devices in each SCSI
+instance.""",
+        }, # table
+        "scsiIntrPortEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.2.1",
+            "status" : "current",
+            "linkage" : [
+                "scsiInstIndex",
+                "scsiDeviceIndex",
+                "scsiPortIndex",
+            ],
+            "description" :
+                """An entry (row) containing information applicable to a
+particular SCSI initiator port of a particular SCSI device
+within a SCSI instance.""",
+        }, # row
+        "scsiIntrPortName" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiName"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents the name of the port assigned for use
+by the SCSI protocol.  The format will depend on the type of
+transport this port is using.""",
+        }, # column
+        "scsiIntrPortIdentifier" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIdentifier"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents the identifier of the port in one of
+the format(s) appropriate for the type of transport in use.""",
+        }, # column
+        "scsiIntrPortOutCommands" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "units" : "commands",
+            "description" :
+                """This object represents the number of commands sent by this
+SCSI initiator port.
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system.""",
+        }, # column
+        "scsiIntrPortWrittenMegaBytes" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "units" : "Megabytes",
+            "description" :
+                """This object represents the amount of data in megabytes sent
+by this SCSI initiator port.
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system.""",
+        }, # column
+        "scsiIntrPortReadMegaBytes" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "units" : "Megabytes",
+            "description" :
+                """This object represents the amount of data in megabytes
+received by this SCSI initiator port.
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system.""",
+        }, # column
+        "scsiIntrPortHSOutCommands" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.2.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "commands",
+            "description" :
+                """This object represents the number of commands sent by this
+SCSI initiator port.  This object provides support for systems
+that can quickly generate a large number of commands because
+they run at high speed.
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system.""",
+        }, # column
+        "scsiRemoteTgtDev" : {
+            "nodetype" : "node",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3",
+        }, # node
+        "scsiDscTgtTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.1",
+            "status" : "current",
+            "description" :
+                """This table includes all the remote (not in the local system)
+SCSI target ports that are authorized to attach to each local
+SCSI initiator port of this SCSI instance.""",
+        }, # table
+        "scsiDscTgtEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.1.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "scsiInstIndex",
+                "scsiDeviceIndex",
+                "scsiDscTgtIntrPortIndex",
+                "scsiDscTgtIndex",
+            ],
+            "description" :
+                """Each entry (row) contains information about the SCSI target
+device or port to which this SCSI initiator port (or all SCSI
+initiator ports in the SCSI initiator entry indexed by
+scsiInstIndex, scsiDeviceIndex) will attempt to attach.  The
+entry is either for all local ports (if scsiDscTgtIntrPortIndex
+is zero) or only for the specific SCSI initiator port
+identified by scsiDscTgtIntrPortIndex.  Note that if an entry in
+this table is deleted, any corresponding entries in the
+scsiDscLunsTable must be deleted as well.
+The StorageType of a row in this table is specified by the
+instance of scsiInstStorageType that is INDEXed by the same
+value of scsiInstIndex.""",
+        }, # row
+        "scsiDscTgtIntrPortIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiPortIndexValueOrZero"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This object relates to a particular local device within a
+particular SCSI instance and specifies
+- the index of the local SCSI initiator port,
+- or zero, if this entry refers to the local device and
+therefore refers to all the local SCSI initiator ports.""",
+        }, # column
+        "scsiDscTgtIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIndexValue"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This object is an arbitrary integer used to uniquely identify
+a particular SCSI target device either discovered by, or
+configured for use with, one or more ports scsiDscTgtName of
+a particular device within a particular SCSI instance.""",
+        }, # column
+        "scsiDscTgtDevOrPort" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiDeviceOrPort"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object indicates whether this entry describes a
+configured SCSI target device name (and applies to all ports
+on the identified SCSI target device) or an individual SCSI
+target port.""",
+        }, # column
+        "scsiDscTgtName" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiName"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object represents the name of this configured or
+discovered SCSI target device or port depending on the value
+of scsiDscTgtDevOrPort.""",
+        }, # column
+        "scsiDscTgtConfigured" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "default" : "true",
+            "description" :
+                """This object means
+-true(1): this entry has been configured by an administrator.
+-false(2): this entry has been added from a discovery
+mechanism (e.g., SendTargets, SLP, iSNS).
+An administrator can modify this value from false to true.""",
+        }, # column
+        "scsiDscTgtDiscovered" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object means
+-true(1): this entry has been discovered by the SCSI instance
+as result of an automatic discovery process.
+-false(2):this entry has been added by manual configuration.
+This entry is read-only because an administrator cannot change
+it.
+Note that it is an implementation decision to determine how
+long to retain a row with configured=false, such as when the
+SCSI target device is no longer visible/accessible to the local
+SCSI initiator device.""",
+        }, # column
+        "scsiDscTgtInCommands" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "units" : "commands",
+            "description" :
+                """This object represents the number of commands received from
+this SCSI target port or device.
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system, and at other times as
+indicated by the value of scsiDscTgtLastCreation.""",
+        }, # column
+        "scsiDscTgtWrittenMegaBytes" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "units" : "Megabytes",
+            "description" :
+                """This object represents the amount of megabytes of data sent as
+the result of WRITE commands to this SCSI target port or device.
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system, and at other times as
+indicated by the value of scsiDscTgtLastCreation.""",
+        }, # column
+        "scsiDscTgtReadMegaBytes" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.1.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "units" : "Megabytes",
+            "description" :
+                """This object represents the amount of megabytes received as the
+result of READ commands to this SCSI target port or device.
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system, and at other times as
+indicated by the value of scsiDscTgtLastCreation.""",
+        }, # column
+        "scsiDscTgtHSInCommands" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.1.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "commands",
+            "description" :
+                """This object represents the number of commands received by this
+SCSI target port or device.  This object provides support for
+system that can quickly generate a large number of commands
+because they run at high speed.
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system, and at other times as
+indicated by the value of scsiDscTgtLastCreation.""",
+        }, # column
+        "scsiDscTgtLastCreation" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.1.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents the value of sysUpTime when this row
+was created.""",
+        }, # column
+        "scsiDscTgtRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.1.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object allows an administrator to configure dynamically a
+new entry in this table via SNMP or eventually delete it.
+An administrator is not allowed to delete an entry for which
+the value of the object scsiIntrDscTgtDiscovered is equal to
+true.
+Note that when an entry in this table is deleted, then any
+corresponding entries in the scsiDscLunsTable must also be
+automatically deleted.
+
+A newly created row cannot be made active until a value has
+been set for scsiDscTgtName.  In this case, the value of the
+corresponding instance of the scsiDscTgtRowStatus column will
+stay 'notReady'.
+The RowStatus TC [RFC2579] requires that this DESCRIPTION
+clause states under which circumstances other objects in this
+row can be modified:
+The value of this object has no effect on whether other objects
+in this conceptual row can be modified.""",
+        }, # column
+        "scsiDscLunTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.2",
+            "status" : "current",
+            "description" :
+                """This table includes all the remote (not in the local system)
+logical unit numbers (LUNs) discovered via each local SCSI
+initiator port of each local device within a particular SCSI
+instance.""",
+        }, # table
+        "scsiDscLunEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.2.1",
+            "status" : "current",
+            "linkage" : [
+                "scsiInstIndex",
+                "scsiDeviceIndex",
+                "scsiDscTgtIntrPortIndex",
+                "scsiDscTgtIndex",
+                "scsiDscLunIndex",
+            ],
+            "description" :
+                """An entry (row) represents a discovered LUN at a particular
+SCSI target device (scsiDscTgtIndex), where the LUN was
+discovered by a particular local SCSI initiator device within a
+particular SCSI instance, possibly via a particular local
+SCSI initiator port.
+Note that when an entry in the scsiDscTgtTable is deleted,
+all corresponding entries in this table should automatically be
+deleted.""",
+        }, # row
+        "scsiDscLunIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIndexValue"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This object is an arbitrary integer used to uniquely identify
+a particular LUN discovered by a particular SCSI initiator port
+or a particular SCSI initiator device within a particular SCSI
+instance.
+Entries in the scsiDscLunIdTable are associated with a LUN by
+having the value of this object in their INDEX.""",
+        }, # column
+        "scsiDscLunLun" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiLUN"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object contains the Logical Unit Number (LUN) of the
+discovered logical unit.""",
+        }, # column
+        "scsiDscLunIdTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.3",
+            "status" : "current",
+            "description" :
+                """This table includes all the known LU identifiers of the remote
+(not in the local system) logical units discovered via each
+local SCSI initiator port or device of this SCSI instance.""",
+        }, # table
+        "scsiDscLunIdEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.3.1",
+            "status" : "current",
+            "linkage" : [
+                "scsiInstIndex",
+                "scsiDeviceIndex",
+                "scsiDscTgtIntrPortIndex",
+                "scsiDscTgtIndex",
+                "scsiDscLunIndex",
+                "scsiDscLunIdIndex",
+            ],
+            "description" :
+                """An entry (row) represents the LU identifier of a discovered
+LUN at a particular SCSI target device (scsiDscTgtIndex), where
+the LUN was discovered by a particular local SCSI initiator
+device within a particular SCSI instance, possibly via a
+particular local SCSI initiator port.""",
+        }, # row
+        "scsiDscLunIdIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIndexValue"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This object is an arbitrary integer used to uniquely identify
+a particular LUN identifier discovered by each SCSI initiator
+device or particular SCSI initiator port within a particular
+SCSI instance.""",
+        }, # column
+        "scsiDscLunIdCodeSet" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIdCodeSet"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object specifies the code set in use with this
+identifier.  The value is represented in the same format as
+is contained in the identifier's Identification Descriptor
+within the logical unit's Device Identification Page.""",
+            "reference" :
+                """ANSI - SCSI Primary Commands - 2 (SPC-2),
+ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
+Vital Product Data Parameters [SPC2]""",
+        }, # column
+        "scsiDscLunIdAssociation" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIdAssociation"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object specifies what the identifier is associated with
+(e.g., with the addressed physical/logical device or with a
+particular port).  The value is represented in the same format
+as is contained in the identifier's Identification Descriptor
+within the logical unit's Device Identification Page.""",
+            "reference" :
+                """ANSI - SCSI Primary Commands - 2 (SPC-2),
+ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
+Vital Product Data Parameters [SPC2]""",
+        }, # column
+        "scsiDscLunIdType" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.3.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIdType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object specifies the type of the identifier.
+The value is represented in the same format as is contained in
+the identifier's Identification Descriptor within the logical
+unit's Device Identification Page.""",
+            "reference" :
+                """ANSI - SCSI Primary Commands - 2 (SPC-2),
+ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
+Vital Product Data Parameters [SPC2]""",
+        }, # column
+        "scsiDscLunIdValue" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.3.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIdValue"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents the actual value of this identifier.
+The format is defined by the objects scsiDscLunIdCodeSet,
+scsiDscLunIdAssociation, scsiDscLunIdType.
+The value is represented in the same format as is contained in
+the identifier's Identification Descriptor within the logical
+unit's Device Identification Page.""",
+            "reference" :
+                """ANSI - SCSI Primary Commands - 2 (SPC-2),
+ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
+Vital Product Data Parameters [SPC2]""",
+        }, # column
+        "scsiAttTgtPortTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.4",
+            "status" : "current",
+            "description" :
+                """This table includes all the remote (not in the local system)
+SCSI target ports that are currently attached to each local
+SCSI initiator port of this SCSI instance.""",
+        }, # table
+        "scsiAttTgtPortEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.4.1",
+            "status" : "current",
+            "linkage" : [
+                "scsiInstIndex",
+                "scsiDeviceIndex",
+                "scsiPortIndex",
+                "scsiAttTgtPortIndex",
+            ],
+            "description" :
+                """An entry (row) represents a remote SCSI target port
+(scsiAttTgtPortIndex) currently attached to a particular
+SCSI initiator port (scsiPortIndex) of a particular SCSI
+initiator device within a particular SCSI instance.""",
+        }, # row
+        "scsiAttTgtPortIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.4.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIndexValue"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """An arbitrary integer used to uniquely identify a particular
+SCSI target currently attached to a particular SCSI initiator
+port of a particular SCSI initiator device within a particular
+SCSI instance.""",
+        }, # column
+        "scsiAttTgtPortDscTgtIdx" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.4.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIndexValueOrZero"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object contains the value of the scsiDscTgtIntrPortIndex
+index variable for the row in the scsiDscTgtTable representing
+this currently attached SCSI target port.  If the currently
+attached SCSI target port is not represented in the
+scsiDscTgtTable, then the value of this object is zero.""",
+        }, # column
+        "scsiAttTgtPortName" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.4.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiName"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object contains the name of the attached SCSI target
+port.""",
+        }, # column
+        "scsiAttTgtPortIdentifier" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.2.3.4.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIdentifier"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object contains the identifier of the attached SCSI
+target port.""",
+        }, # column
+        "scsiTargetDevice" : {
+            "nodetype" : "node",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3",
+        }, # node
+        "scsiTgtDevTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.1",
+            "status" : "current",
+            "description" :
+                """This table contains information about each local SCSI target
+device.""",
+        }, # table
+        "scsiTgtDevEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.1.1",
+            "status" : "current",
+            "linkage" : [
+                "scsiInstIndex",
+                "scsiDeviceIndex",
+            ],
+            "description" :
+                """An entry (row) containing information applicable to a
+particular local SCSI target device within a particular SCSI
+instance.""",
+        }, # row
+        "scsiTgtDevNumberOfLUs" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Gauge32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object is the number of logical units accessible via this
+local SCSI target device.""",
+        }, # column
+        "scsiTgtDeviceStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "unknown" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "available" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "broken" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "readying" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "abnormal" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "nonAddrFailure" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "nonAddrFailReadying" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                    "nonAddrFailAbnormal" : {
+                        "nodetype" : "namednumber",
+                        "number" : "8"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents the status of this SCSI device,
+summarizing the state of both the addressable devices (i.e.,
+the logical units) and the non-addressable devices within this
+SCSI device:
+     - unknown(1): This value is used when the status cannot be
+     determined
+     - available(2): All addressable and non-addressable
+     devices within the SCSI device are fully operational (i.e.,
+     no logical units have an abnormal status).
+     - broken(3): The SCSI device is not operational and cannot
+     be made operational without external intervention.
+     - readying(4): One or more logical units within the SCSI
+     device are being initialized and access to the SCSI device
+     is temporarily limited (i.e., one or more of the logical
+     units have a readying status).
+     - abnormal(5): One or more addressable devices within the
+     SCSI device are indicating a status other than available;
+     nevertheless, the SCSI device is operational (i.e., one or
+     more of the logical units have an abnormal status).
+     - nonAddrFailure(6): One or more non-addressable devices
+     within the SCSI device have failed; nevertheless, the SCSI
+     device is operational (i.e., no logical units have an
+     abnormal or readying status).
+
+
+
+     - nonAddrFailReadying(7): One or more non-addressable
+     devices within the SCSI device have failed; nevertheless,
+     one or more logical units within the SCSI device are being
+     initialized and access to the SCSI device is temporarily
+     limited.
+     - nonAddrFailAbnormal(8): One or more non-addressable
+     devices within the SCSI device have failed and one or more
+     addressable devices within the SCSI device are indicating a
+     status other than available; however, the SCSI device is
+     operational.""",
+            "reference" :
+                """SCSI Controller Commands-2 (SCC-2) ANSI INCITS 318-1998
+6.3.1.8 REPORT STATES service action [SCC2]""",
+        }, # column
+        "scsiTgtDevNonAccessibleLUs" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Gauge32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object is the number of logical units existing but not
+currently accessible via this local SCSI target device.""",
+        }, # column
+        "scsiTgtDevResets" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object counts the number of hard resets encountered
+by this SCSI target device.
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system.""",
+            "reference" :
+                """SCSI Architecture Model-2 (SAM-2), ANSI INCITS 366-2003,
+T10 Project 1157-D, 12 September 2002 - Chapter 5.9.7 [SAM2]""",
+        }, # column
+        "scsiTgtPortTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.2",
+            "status" : "current",
+            "description" :
+                """This table includes all the local SCSI target ports of all the
+local SCSI target devices.""",
+        }, # table
+        "scsiTgtPortEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.2.1",
+            "status" : "current",
+            "linkage" : [
+                "scsiInstIndex",
+                "scsiDeviceIndex",
+                "scsiPortIndex",
+            ],
+            "description" :
+                """An entry (row) containing information applicable to a
+particular local SCSI target port of a particular local SCSI
+target device within a particular SCSI instance.""",
+        }, # row
+        "scsiTgtPortName" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiName"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents the name of the port assigned for use
+in the SCSI protocol.""",
+        }, # column
+        "scsiTgtPortIdentifier" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIdentifier"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents the identifier of the port in one of
+the format(s) appropriate for the type of transport.""",
+        }, # column
+        "scsiTgtPortInCommands" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "units" : "commands",
+            "description" :
+                """This object represents the number of commands received by this
+SCSI target port.
+
+
+
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system.""",
+        }, # column
+        "scsiTgtPortWrittenMegaBytes" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "units" : "Megabytes",
+            "description" :
+                """This object represents the amount of data written in megabytes
+by this SCSI target port.
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system.""",
+        }, # column
+        "scsiTgtPortReadMegaBytes" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "units" : "Megabytes",
+            "description" :
+                """This object represents the amount of data read in megabytes by
+this SCSI target port.
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system.""",
+        }, # column
+        "scsiTgtPortHSInCommands" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.2.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "commands",
+            "description" :
+                """This object represents the number of commands received.  This
+object provides support for systems that can quickly generate a
+large number of commands because they run at high speed.
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system.""",
+        }, # column
+        "scsiRemoteIntrDev" : {
+            "nodetype" : "node",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.3",
+        }, # node
+        "scsiAuthorizedIntrTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.3.1",
+            "status" : "current",
+            "description" :
+                """This table includes all the authorized SCSI initiator devices
+or ports that may attach a SCSI target device
+(ScsiAuthIntrTgtPortIndex = 0) or port (ScsiAuthIntrTgtPortIndex
+different than 0) of the local SCSI instance.  Statistics are
+kept for each such authorization; thus, the authorizations
+should be configured in the manner that will cause the desired
+set of statistics to be collected and that will determine the
+correct LUN map.""",
+        }, # table
+        "scsiAuthorizedIntrEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.3.1.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "scsiInstIndex",
+                "scsiDeviceIndex",
+                "scsiAuthIntrTgtPortIndex",
+                "scsiAuthIntrIndex",
+            ],
+            "description" :
+                """An entry (row) represents a remote SCSI initiator port or
+remote SCSI initiator device that may attach to the local SCSI
+target port or device within a particular SCSI instance.
+The StorageType of a row in this table is specified by the
+instance of scsiInstStorageType that is INDEXed by the same
+value of scsiInstIndex.""",
+        }, # row
+        "scsiAuthIntrTgtPortIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.3.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiPortIndexValueOrZero"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This object contains either the index of the port or zero, to
+indicate any port, on the particular local SCSI target device.""",
+        }, # column
+        "scsiAuthIntrIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.3.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIndexValue"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This object is an arbitrary integer used to uniquely identify
+a SCSI initiator device or port that is authorized to attach
+to a particular local SCSI target device or port of a particular
+SCSI instance.""",
+        }, # column
+        "scsiAuthIntrDevOrPort" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.3.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiDeviceOrPort"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object specifies whether this entry refers to a remote
+SCSI initiator port or to a SCSI initiator device.
+A value of device(1) means that the authorized remote initiator
+is a SCSI initiator device and includes all of its ports.
+A value of port(2) means that the authorized remote initiator
+is a SCSI initiator port.""",
+        }, # column
+        "scsiAuthIntrName" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.3.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiName"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object represents the name of the remote SCSI initiator
+device or port authorized by this row.""",
+        }, # column
+        "scsiAuthIntrLunMapIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.3.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIndexValueOrZero"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object identifies the set of entries in the
+scsiLunMapTable for which scsiLunMapIndex has the same value as
+the value of this object.  The identified set of entries
+
+
+
+constitutes the LUN map to be used for accessing logical units
+when the remote SCSI initiator port or device corresponding to
+this entry is attached to any local SCSI target port or device
+corresponding to this entry.
+Note that this object has a value of zero if this entry should
+use the default LUN map.""",
+        }, # column
+        "scsiAuthIntrAttachedTimes" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.3.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "units" : "Times",
+            "description" :
+                """This object indicates the number of times that this remote
+SCSI initiator device or port has transitioned from unattached
+to attached to this local SCSI target device or port.
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system, and at other times as
+indicated by the value of scsiAuthIntrLastCreation.""",
+        }, # column
+        "scsiAuthIntrOutCommands" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.3.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "units" : "commands",
+            "description" :
+                """This object indicates the number of commands that the remote
+SCSI initiator device or port corresponding to this entry has
+sent to the local SCSI target device or port corresponding to
+this entry.
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system, and at other times as
+indicated by the value of scsiAuthIntrLastCreation.""",
+        }, # column
+        "scsiAuthIntrReadMegaBytes" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.3.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "units" : "Megabytes",
+            "description" :
+                """This object indicates the amount of data in megabytes that
+the remote SCSI initiator device or port corresponding to this
+entry has read from the local SCSI target device or port
+corresponding to this entry.
+Discontinuities in the value of this counter can occur at re-
+
+
+
+initialization of the management system, and at other times as
+indicated by the value of scsiAuthIntrLastCreation.""",
+        }, # column
+        "scsiAuthIntrWrittenMegaBytes" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.3.1.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "units" : "Megabytes",
+            "description" :
+                """This object indicates the amount of data in megabytes that the
+remote SCSI initiator device or port corresponding to this
+entry has written to the local SCSI target device or port
+corresponding to this entry.
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system, and at other times as
+indicated by the value of scsiAuthIntrLastCreation.""",
+        }, # column
+        "scsiAuthIntrHSOutCommands" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.3.1.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "commands",
+            "description" :
+                """This object represents the number of commands sent by the
+remote SCSI initiator device or port corresponding to this
+entry to the local SCSI target device or port corresponding to
+this entry.  This object provides support for systems that can
+quickly generate a large number of commands because they run at
+high speed.
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system, and at other times as
+indicated by the value of scsiAuthIntrLastCreation.""",
+        }, # column
+        "scsiAuthIntrLastCreation" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.3.1.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object indicates the value of sysUpTime when this row was
+last created.""",
+        }, # column
+        "scsiAuthIntrRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.3.1.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object allows an administrator to create or delete this
+entry.
+A newly created row cannot be made active until a value has
+been set for scsiAuthIntrName.  In this case, the value of the
+corresponding instance of the scsiAuthIntrRowStatus column will
+stay 'notReady'.
+The RowStatus TC [RFC2579] requires that this DESCRIPTION
+clause states under which circumstances other objects in this
+row can be modified:
+The value of this object has no effect on whether other objects
+in this conceptual row can be modified.""",
+        }, # column
+        "scsiAttIntrPortTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.3.2",
+            "status" : "current",
+            "description" :
+                """This table includes all the remote SCSI initiator ports that
+are currently attached to a local SCSI target port of all local
+devices within all SCSI instances.""",
+        }, # table
+        "scsiAttIntrPortEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.3.2.1",
+            "status" : "current",
+            "linkage" : [
+                "scsiInstIndex",
+                "scsiDeviceIndex",
+                "scsiPortIndex",
+                "scsiAttIntrPortIndex",
+            ],
+            "description" :
+                """An entry (row) represents a remote SCSI initiator port
+currently attached to a particular local SCSI target port of a
+particular SCSI target device of a particular SCSI instance.""",
+        }, # row
+        "scsiAttIntrPortIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.3.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIndexValue"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This object represents an arbitrary integer used to uniquely
+identify a particular attached remote initiator port to a
+particular SCSI target port within a particular SCSI target
+device within a particular SCSI instance.""",
+        }, # column
+        "scsiAttIntrPortAuthIntrIdx" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.3.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIndexValueOrZero"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object is the corresponding index in the
+scsiAuthorizedIntrTable for this current attached remote
+SCSI initiator device or zero if this remote attached SCSI
+initiator device is not configured in that table.""",
+        }, # column
+        "scsiAttIntrPortName" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.3.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiName"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents the name of the remote SCSI initiator
+device attached to this local SCSI target port.""",
+        }, # column
+        "scsiAttIntrPortIdentifier" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.3.3.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIdentifier"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents the identifier of the remote SCSI
+initiator device attached to this local SCSI target port.""",
+        }, # column
+        "scsiLogicalUnit" : {
+            "nodetype" : "node",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4",
+        }, # node
+        "scsiLuTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.1",
+            "status" : "current",
+            "description" :
+                """This table contains the logical units exposed by local SCSI
+target devices.
+
+
+
+It includes attributes for the World Wide Name (WWN),
+scsiLuVendorId, scsiLuProductId, and scsiLuRevisionId, which may
+also appear in the scsiLuIdTable.  If an implementation exposes
+a WWN as a LuIdTable entry, it must match the scsiLuWwnName in
+this table.  If an implementation exposes a (vendor, product,
+revision) identifier as an LuIdTable entry, each of these fields
+must match the scsiLuVendorId, scsiLuProductId, and
+scsiLuRevisionId attributes in this table.""",
+        }, # table
+        "scsiLuEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.1.1",
+            "status" : "current",
+            "linkage" : [
+                "scsiInstIndex",
+                "scsiDeviceIndex",
+                "scsiLuIndex",
+            ],
+            "description" :
+                """An entry (row) contains information applicable to a particular
+logical unit of a particular local SCSI target device within a
+particular SCSI instance.""",
+        }, # row
+        "scsiLuIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIndexValue"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This object represents an arbitrary integer used to uniquely
+identify a particular logical unit within a particular SCSI
+target device within a particular SCSI instance.""",
+        }, # column
+        "scsiLuDefaultLun" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiLUN"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents the default Logical Unit Number (LUN)
+for this logical unit; if a SCSI initiator device has not been
+configured to view this logical unit via an entry in the
+ScsiLunMapTable, the LU will be visible as scsiLuDefaultLun.
+If this logical unit does not have a default LUN, it will only
+be visible if specified via the ScsiLunMapTable, and this
+object will contain a zero-length string.""",
+        }, # column
+        "scsiLuWwnName" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiLuNameOrZero"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents the World Wide Name of this LU that is
+the device identifier of the Vital Product Data (VPD) page name;
+if there is no WWN for this LU, this object will contain a
+zero-length string.  If there is more than one identifier, they
+will be listed in the scsiLuIdTable and this object will contain
+a zero-length string.""",
+        }, # column
+        "scsiLuVendorId" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents a string identifying the vendor of this
+LU as reported in the Standard INQUIRY data.""",
+        }, # column
+        "scsiLuProductId" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents a string identifying the product for
+this LU as reported in the Standard INQUIRY data.""",
+        }, # column
+        "scsiLuRevisionId" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents a string defining the product revision
+of this LU as reported in the Standard INQUIRY data.""",
+        }, # column
+        "scsiLuPeripheralType" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object is the value returned by SCSI Standard INQUIRY
+data.  It can be: direct-access device, sequential-access
+device, printer, communication device and so on.
+The values that can be returned here are defined in SCSI
+Primary Commands -2.""",
+            "reference" :
+                """ANSI - SCSI Primary Commands - 2 (SPC-2),
+ANSI INCITS 351-2001,11 July 2001 [SPC2]- Table 48.""",
+        }, # column
+        "scsiLuStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "unknown" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "available" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "notAvailable" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "broken" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "readying" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "abnormal" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents the status of this logical unit:
+- unknown(1): The status of this logical unit cannot be
+determined.
+- available(2): The logical unit is fully operational (i.e.,
+accepts media access SCSI commands and has no state
+information to report).
+- notAvailable(3): The logical unit is capable of being
+supported but is not available (i.e., no logical unit is
+currently present or the logical unit is present but not
+configured for use).
+- broken(4): The logical unit has failed and cannot respond
+to SCSI commands.
+- readying(5): The logical unit is being initialized and
+
+
+
+access is temporarily limited.
+- abnormal(6): The logical unit has state information
+available that indicates it is operating with limits.  The
+scsiLuState indicates what those limits are.""",
+            "reference" :
+                """SCSI Controller Commands-2 (SCC-2) ANSI INCITS 318-1998
+6.3.1.8 REPORT STATES service action [SCC2]""",
+        }, # column
+        "scsiLuState" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.1.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Bits",
+                    "dataLost" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "dynamicReconfigurationInProgress" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "exposed" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "fractionallyExposed" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "partiallyExposed" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "protectedRebuild" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "protectionDisabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "rebuild" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                    "recalculate" : {
+                        "nodetype" : "namednumber",
+                        "number" : "8"
+                    },
+                    "spareInUse" : {
+                        "nodetype" : "namednumber",
+                        "number" : "9"
+                    },
+                    "verifyInProgress" : {
+                        "nodetype" : "namednumber",
+                        "number" : "10"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents the state of a logical unit and its
+meaning according to the bit position:
+     0 Data lost: Within the logical unit data has been lost.
+     1 Dynamic reconfiguration in progress: The logical unit is
+          being reconfigured.  In this state all data is still
+          protected.
+     2 Exposed: Within the logical unit data is not protected.
+          In this state all data is still valid; however, loss
+          of data or data availability is unavoidable in the
+          event of a failure.
+     3 Fractionally exposed: Within the logical unit part of
+          the data is not protected.  In this state all data is
+          still valid; however, a failure may cause a loss of
+          data or a loss of data availability.
+     4 Partially exposed: Within the logical unit one or more
+          underlying storage devices have failed.  In this state
+          all data is still protected.
+     5 Protected rebuild: The logical unit is in the process of
+          a rebuild operation.  In this state all data is
+          protected.
+     6 Protection disabled: Within the logical unit the data
+
+
+
+          protection method has been disabled.
+          In this state all data is still valid; however,
+          loss of data or data availability is unavoidable
+          in the event of a failure.
+     7 Rebuild: The data protection method is in the process of
+          rebuilding data.  In this state data is not protected.
+     8 Recalculate: The logical unit is in the process of a
+          recalculate operation.
+     9 Spare in use: Within the logical unit a storage device
+          in full or part is being used to store data.  In this
+          state all data is still protected.
+     10 Verify in progress: Within the logical unit data is
+          being verified.""",
+            "reference" :
+                """SCSI Controller Commands-2 (SCC-2) ANSI INCITS 318-1998
+6.3.1.8 REPORT STATES service action [SCC2]""",
+        }, # column
+        "scsiLuInCommands" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.1.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "units" : "commands",
+            "description" :
+                """This object represents the number of commands received by this
+logical unit.
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system, and at other times as
+indicated by the value of scsiLuLastCreation.""",
+        }, # column
+        "scsiLuReadMegaBytes" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.1.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "units" : "Megabytes",
+            "description" :
+                """This object represents the amount of data in megabytes read
+from this logical unit.
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system, and at other times as
+indicated by the value of scsiLuLastCreation.""",
+        }, # column
+        "scsiLuWrittenMegaBytes" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.1.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "units" : "Megabytes",
+            "description" :
+                """This object represents the amount of data in megabytes written
+to this logical unit.
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system, and at other times as
+indicated by the value of scsiLuLastCreation.""",
+        }, # column
+        "scsiLuInResets" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.1.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "units" : "resets",
+            "description" :
+                """This object represents the number of times that this logical
+unit received
+- a LOGICAL UNIT RESET or TARGET RESET task management request,
+or
+- any other SCSI transport protocol-specific action or event
+that causes a Logical Unit Reset or a Hard Reset at a SCSI
+target port of the containing device
+([SAM2] Chapters 5.9.6, 5.9.7).
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system, and at other times as
+indicated by the value of scsiLuLastCreation.""",
+            "reference" :
+                """SCSI Architecture Model-2 (SAM-2), ANSI INCITS 366-2003,
+T10 Project 1157-D, 12 September 2002 - Chapter 5.9.7 [SAM2]""",
+        }, # column
+        "scsiLuOutTaskSetFullStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.1.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents the number of Task Set full statuses
+issued for this logical unit.
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system, and at other times as
+indicated by the value of scsiLuLastCreation.""",
+        }, # column
+        "scsiLuHSInCommands" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.1.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "units" : "commands",
+            "description" :
+                """This object represents the number of commands received by this
+logical unit.  This object provides support for systems that can
+quickly generate a large number of commands because they run at
+high speed.
+Discontinuities in the value of this counter can occur at re-
+initialization of the management system, and at other times as
+indicated by the value of scsiLuLastCreation.""",
+        }, # column
+        "scsiLuLastCreation" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.1.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object indicates the value of sysUpTime when this row was
+last created.""",
+        }, # column
+        "scsiLuIdTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.2",
+            "status" : "current",
+            "description" :
+                """A table of identifiers for all logical units exposed by the
+local SCSI target device.""",
+        }, # table
+        "scsiLuIdEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.2.1",
+            "status" : "current",
+            "linkage" : [
+                "scsiInstIndex",
+                "scsiDeviceIndex",
+                "scsiLuIndex",
+                "scsiLuIdIndex",
+            ],
+            "description" :
+                """An entry (row) containing information applicable to a
+particular identifier for a particular logical unit of a
+particular SCSI target device within a particular SCSI
+instance.""",
+        }, # row
+        "scsiLuIdIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIndexValue"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This object represents an arbitrary integer used to uniquely
+identify a particular LU identifier within a particular logical
+unit within a particular SCSI target device within a particular
+SCSI instance.""",
+        }, # column
+        "scsiLuIdCodeSet" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIdCodeSet"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object specifies the code set in use with this
+identifier.  The value is represented in the same format as is
+contained in the identifier's Identification Descriptor within
+the logical unit's Device Identification Page.""",
+            "reference" :
+                """ANSI - SCSI Primary Commands - 2 (SPC-2),
+ANSI INCITS 351-2001, 11 July 2001 Chapter 8: section 8.4.4,
+Vital Product Data Parameters [SPC2]""",
+        }, # column
+        "scsiLuIdAssociation" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIdAssociation"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object specifies what the identifier is associated with
+(e.g., with the addressed physical/logical device or with a
+particular port).  The value is represented in the same format
+as is contained in the identifier's Identification Descriptor
+within the logical unit's Device Identification Page.""",
+            "reference" :
+                """ANSI - SCSI Primary Commands - 2 (SPC-2),
+ANSI INCITS 351-2001, 11 July 2001, Chapter 8: section 8.4.4,
+Vital Product Data Parameters [SPC2]""",
+        }, # column
+        "scsiLuIdType" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIdType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object specifies the type of the identifier.
+
+
+
+The value is represented in the same format as is contained in
+the identifier's Identification Descriptor within the logical
+unit's Device Identification Page.""",
+            "reference" :
+                """ANSI - SCSI Primary Commands - 2 (SPC-2),
+ANSI INCITS 351-2001, 11 July 2001, Chapter 8: section 8.4.4,
+Vital Product Data Parameters [SPC2]""",
+        }, # column
+        "scsiLuIdValue" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIdValue"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object represents the actual value of this identifier.
+The format is defined by the objects scsiLuIdCodeSet,
+scsiLuIdAssociation, scsiLuIdType.
+The value is represented in the same format as is contained in
+the identifier's Identification Descriptor within the logical
+unit's Device Identification Page.""",
+            "reference" :
+                """ANSI - SCSI Primary Commands - 2 (SPC-2),
+ANSI INCITS 351-2001, 11 July 2001, Chapter 8: section 8.4.4,
+Vital Product Data Parameters [SPC2]""",
+        }, # column
+        "scsiLunMapTable" : {
+            "nodetype" : "table",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.3",
+            "status" : "current",
+            "description" :
+                """This table provides the ability to present a logical unit
+using different Logical Unit Numbers for different SCSI
+initiator devices.
+This table provides a mapping between a logical unit and a
+Logical Unit Number, and can be referenced by a
+ScsiAuthorizedIntrEntry to specify the LUN map for that
+initiator.""",
+        }, # table
+        "scsiLunMapEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.3.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "scsiInstIndex",
+                "scsiDeviceIndex",
+                "scsiLunMapIndex",
+                "scsiLunMapLun",
+            ],
+            "description" :
+                """An entry containing information about the mapping of a
+
+
+
+particular logical unit to a particular LUN.  The set of
+entries that all have the same values of scsiInstIndex,
+scsiDeviceIndex and scsiLunMapIndex constitutes a LUN map
+within a particular SCSI instance.
+The StorageType of a row in this table is specified by
+the instance of scsiInstStorageType that is INDEX-ed by
+the same value of scsiInstIndex.""",
+        }, # row
+        "scsiLunMapIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIndexValue"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This object represents an arbitrary integer used to uniquely
+identify a particular LunMap within a particular SCSI target
+device within a particular SCSI instance.""",
+        }, # column
+        "scsiLunMapLun" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiLUN"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This object specifies the Logical Unit Number, to which a
+logical unit is mapped by this row.""",
+        }, # column
+        "scsiLunMapLuIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SCSI-MIB", "name" : "ScsiIndexValue"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object identifies the logical unit for which the value of
+scsiLuIndex is the same as the value of this object.  The
+identified logical unit is the one mapped to a LUN by this
+row.""",
+        }, # column
+        "scsiLunMapRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.2.4.3.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object allows an administrator to create and delete this
+entry.""",
+        }, # column
+        "scsiConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.3",
+        }, # node
+        "scsiCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.3.1",
+        }, # node
+        "scsiGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.3.2",
+        }, # node
+    }, # nodes
+
+    "notifications" : {
+        "scsiTgtDeviceStatusChanged" : {
+            "nodetype" : "notification",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.0.0.1",
+            "status" : "current",
+            "objects" : {
+                "scsiTgtDeviceStatus" : {
+                    "nodetype" : "object",
+                    "module" : "SCSI-MIB"
+                },
+            },
+            "description" :
+                """This notification will be generated for each occurrence of the
+abnormal status (e.g., if the SCSI target device's current
+status is abnormal) providing that the SCSI instance's value of
+scsiInstScsiNotificationsEnable is enabled.
+An SNMP agent implementing the SCSI MIB module should not send
+more than three SCSI identical notifications in any 10-second
+period.""",
+        }, # notification
+        "scsiLuStatusChanged" : {
+            "nodetype" : "notification",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.0.0.2",
+            "status" : "current",
+            "objects" : {
+                "scsiLuStatus" : {
+                    "nodetype" : "object",
+                    "module" : "SCSI-MIB"
+                },
+            },
+            "description" :
+                """This notification will be generated each time that
+scsiLuStatus changes providing that the SCSI instance's value
+of scsiInstScsiNotificationsEnable is enabled.
+An SNMP agent implementing the SCSI MIB module should not send
+more than three SCSI identical notifications in any 10-second
+period.""",
+        }, # notification
+    }, # notifications
+
+    "groups" : {
+        "scsiDeviceGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.3.2.1",
+            "status" : "current",
+            "members" : {
+                "scsiInstAlias" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiInstSoftwareIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiInstVendorVersion" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiInstScsiNotificationsEnable" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiInstStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiDeviceAlias" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiDeviceRole" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiDevicePortNumber" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiPortRole" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiPortTransportPtr" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiTransportType" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiTransportPointer" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiTransportDevName" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing information about SCSI
+instances, devices, and ports.""",
+        }, # group
+        "scsiInitiatorDeviceGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.3.2.2",
+            "status" : "current",
+            "members" : {
+                "scsiIntrDevTgtAccessMode" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiIntrPortName" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiIntrPortIdentifier" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiAttTgtPortDscTgtIdx" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiAttTgtPortName" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiAttTgtPortIdentifier" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+            }, # members
+            "description" :
+                """This group is relevant for s SCSI initiator device and port.""",
+        }, # group
+        "scsiDiscoveryGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.3.2.3",
+            "status" : "current",
+            "members" : {
+                "scsiDscTgtDevOrPort" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiDscTgtName" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiDscTgtConfigured" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiDscTgtDiscovered" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiDscTgtRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiDscTgtLastCreation" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiDscLunLun" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiDscLunIdCodeSet" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiDscLunIdAssociation" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiDscLunIdType" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiDscLunIdValue" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+            }, # members
+            "description" :
+                """This group is relevant for the discovered SCSI target devices
+by a SCSI initiator port.""",
+        }, # group
+        "scsiTargetDeviceGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.3.2.4",
+            "status" : "current",
+            "members" : {
+                "scsiTgtDevNumberOfLUs" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiTgtDeviceStatus" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiTgtDevNonAccessibleLUs" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiTgtPortName" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiTgtPortIdentifier" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiAttIntrPortAuthIntrIdx" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiAttIntrPortName" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiAttIntrPortIdentifier" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiLuDefaultLun" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiLuWwnName" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiLuVendorId" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiLuProductId" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiLuRevisionId" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiLuPeripheralType" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiLuStatus" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiLuState" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiLuLastCreation" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiLuIdCodeSet" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiLuIdAssociation" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiLuIdType" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiLuIdValue" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+            }, # members
+            "description" :
+                """This group is relevant for a SCSI target device and port.""",
+        }, # group
+        "scsiLunMapGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.3.2.5",
+            "status" : "current",
+            "members" : {
+                "scsiLunMapLuIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiLunMapRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiAuthIntrDevOrPort" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiAuthIntrName" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiAuthIntrLunMapIndex" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiAuthIntrLastCreation" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiAuthIntrRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+            }, # members
+            "description" :
+                """This group is a collection of attributes regarding the mapping
+between Logical Unit Number, logical unit, and target device.""",
+        }, # group
+        "scsiTargetDevStatsGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.3.2.6",
+            "status" : "current",
+            "members" : {
+                "scsiTgtDevResets" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiTgtPortInCommands" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiTgtPortWrittenMegaBytes" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiTgtPortReadMegaBytes" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiLuInCommands" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiLuReadMegaBytes" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiLuWrittenMegaBytes" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiLuInResets" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiLuOutTaskSetFullStatus" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+            }, # members
+            "description" :
+                """This group is a collection of statistics for all
+implementations of the SCSI MIB module that contain SCSI target
+devices.""",
+        }, # group
+        "scsiTargetDevHSStatsGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.3.2.7",
+            "status" : "current",
+            "members" : {
+                "scsiTgtPortHSInCommands" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiLuHSInCommands" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+            }, # members
+            "description" :
+                """This group is a collection of high speed statistics for all
+implementations of the SCSI MIB module that contain SCSI target
+devices.""",
+        }, # group
+        "scsiLunMapStatsGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.3.2.8",
+            "status" : "current",
+            "members" : {
+                "scsiAuthIntrAttachedTimes" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiAuthIntrOutCommands" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiAuthIntrReadMegaBytes" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiAuthIntrWrittenMegaBytes" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+            }, # members
+            "description" :
+                """This group is a collection of statistics regarding SCSI
+initiator devices authorized to attach local logical unit and
+SCSI target device.""",
+        }, # group
+        "scsiLunMapHSStatsGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.3.2.9",
+            "status" : "current",
+            "members" : {
+                "scsiAuthIntrHSOutCommands" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+            }, # members
+            "description" :
+                """This group is a collection of high speed statistics regarding
+SCSI initiator devices authorized to attach local logical unit
+and SCSI target device.""",
+        }, # group
+        "scsiInitiatorDevStatsGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.3.2.10",
+            "status" : "current",
+            "members" : {
+                "scsiIntrDevOutResets" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiIntrPortOutCommands" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiIntrPortWrittenMegaBytes" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiIntrPortReadMegaBytes" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+            }, # members
+            "description" :
+                """This group is a collection of statistics for all
+implementations of the SCSI MIB module that contain SCSI
+initiator devices.""",
+        }, # group
+        "scsiInitiatorDevHSStatsGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.3.2.11",
+            "status" : "current",
+            "members" : {
+                "scsiIntrPortHSOutCommands" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+            }, # members
+            "description" :
+                """This group is a collection of high speed statistics for all
+
+
+
+implementations of the SCSI MIB module that contain SCSI
+initiator devices.""",
+        }, # group
+        "scsiDiscoveryStatsGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.3.2.12",
+            "status" : "current",
+            "members" : {
+                "scsiDscTgtInCommands" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiDscTgtReadMegaBytes" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiDscTgtWrittenMegaBytes" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+            }, # members
+            "description" :
+                """This group is a collection of statistics for all
+implementations of the SCSI MIB module that contain discovered
+SCSI initiator devices.""",
+        }, # group
+        "scsiDiscoveryHSStatsGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.3.2.13",
+            "status" : "current",
+            "members" : {
+                "scsiDscTgtHSInCommands" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+            }, # members
+            "description" :
+                """This group is a collection of high speed statistics for all
+implementations of the SCSI MIB module that contain discovered
+SCSI initiator devices.""",
+        }, # group
+        "scsiDeviceStatGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.3.2.14",
+            "status" : "current",
+            "members" : {
+                "scsiPortBusyStatuses" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of statistics regarding SCSI devices and
+ports.""",
+        }, # group
+        "scsiTgtDevLuNotificationsGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.3.2.15",
+            "status" : "current",
+            "members" : {
+                "scsiTgtDeviceStatusChanged" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiLuStatusChanged" : {
+                    "nodetype" : "member",
+                    "module" : "SCSI-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of notifications regarding status change of SCSI
+target devices and logical units.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "scsiCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "SCSI-MIB",
+            "oid" : "1.3.6.1.2.1.139.3.1.1",
+            "status" : "current",
+            "description" :
+                """Describes the requirements for compliance to this SCSI MIB
+module.
+If an implementation can be both a SCSI target device and a SCSI
+initiator device, all groups are mandatory.""",
+            "requires" : {
+                "scsiDeviceGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "SCSI-MIB"
+                },
+                "scsiTargetDeviceGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "SCSI-MIB",
+                    "description" :
+                        """This group is mandatory for all SCSI implementations that
+have SCSI target devices.""",
+                },
+                "scsiLunMapGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "SCSI-MIB",
+                    "description" :
+                        """This group is mandatory for systems having the capabilities
+of mapping local SCSI target devices and logical units
+according to remote SCSI initiator devices.""",
+                },
+                "scsiTgtDevLuNotificationsGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "SCSI-MIB",
+                    "description" :
+                        """This group is mandatory for all SCSI implementations that
+have SCSI target devices and are able to report status
+changes.""",
+                },
+                "scsiInitiatorDeviceGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "SCSI-MIB",
+                    "description" :
+                        """This group is mandatory for all SCSI implementations that
+have SCSI initiator devices.""",
+                },
+                "scsiDiscoveryGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "SCSI-MIB",
+                    "description" :
+                        """This group is mandatory for systems having the capabilities
+of discovering remote SCSI target devices via local SCSI
+initiator devices.""",
+                },
+                "scsiDeviceStatGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "SCSI-MIB",
+                    "description" :
+                        """This group is mandatory for all SCSI implementations that
+can gather statistics.""",
+                },
+                "scsiInitiatorDevStatsGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "SCSI-MIB",
+                    "description" :
+                        """This group is mandatory for all SCSI implementations that
+can gather statistics at SCSI initiator device side.""",
+                },
+                "scsiDiscoveryStatsGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "SCSI-MIB",
+                    "description" :
+                        """This group is mandatory for system having the capabilities
+of gathering statistics regarding remote SCSI target devices
+via local SCSI initiator devices.""",
+                },
+                "scsiTargetDevStatsGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "SCSI-MIB",
+                    "description" :
+                        """This group is mandatory for all SCSI implementations that
+can gather statistics at SCSI target devices.""",
+                },
+                "scsiLunMapStatsGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "SCSI-MIB",
+                    "description" :
+                        """This group is mandatory for SCSI implementations able to map
+local SCSI target devices and logical units according to
+remote SCSI initiator devices.""",
+                },
+                "scsiInitiatorDevHSStatsGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "SCSI-MIB",
+                    "description" :
+                        """This group is mandatory for all SCSI implementations that
+can gather statistics at the SCSI initiator device side and
+are running at high speed, meaning speed of 4 Gbit/second or
+higher.""",
+                },
+                "scsiDiscoveryHSStatsGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "SCSI-MIB",
+                    "description" :
+                        """This group is mandatory for systems having the capabilities
+of gathering statistics regarding remote SCSI target devices
+via local SCSI initiator devices and are running at high
+speed, meaning speed of 4 Gbit/second or higher.""",
+                },
+                "scsiTargetDevHSStatsGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "SCSI-MIB",
+                    "description" :
+                        """This group is mandatory for all SCSI implementations that
+can gather statistics at SCSI target devices in high speed
+systems, meaning speed of 4 Gbit/second or higher.""",
+                },
+                "scsiLunMapHSStatsGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "SCSI-MIB",
+                    "description" :
+                        """This group is mandatory for SCSI implementations able to map
+local SCSI target devices and logical units according to
+remote SCSI initiator devices in a high speed system, meaning
+speed of 4 Gbit/second or higher.""",
+                },
+            }, # requires
+            "refinements" : {
+                "scsiInstAlias" : {
+                    "module" : "SCSI-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not mandatory.""",
+                },
+                "scsiInstScsiNotificationsEnable" : {
+                    "module" : "SCSI-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not mandatory.""",
+                },
+                "scsiDeviceAlias" : {
+                    "module" : "SCSI-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not mandatory.""",
+                },
+                "scsiInstStorageType" : {
+                    "module" : "SCSI-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "scsiAuthIntrDevOrPort" : {
+                    "module" : "SCSI-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "scsiAuthIntrName" : {
+                    "module" : "SCSI-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "scsiAuthIntrLunMapIndex" : {
+                    "module" : "SCSI-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "scsiAuthIntrRowStatus" : {
+                    "module" : "SCSI-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required, and only one of the six
+enumerated values for the RowStatus textual convention need
+be supported, specifically: active(1).""",
+                },
+                "scsiIntrDevTgtAccessMode" : {
+                    "module" : "SCSI-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not mandatory.""",
+                },
+                "scsiLunMapLuIndex" : {
+                    "module" : "SCSI-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not mandatory.""",
+                },
+                "scsiLunMapRowStatus" : {
+                    "module" : "SCSI-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required, and only one of the six
+enumerated values for the RowStatus textual convention need
+be supported, specifically: active(1).""",
+                },
+                "scsiDscTgtDevOrPort" : {
+                    "module" : "SCSI-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not mandatory.""",
+                },
+                "scsiDscTgtName" : {
+                    "module" : "SCSI-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not mandatory.""",
+                },
+                "scsiDscTgtConfigured" : {
+                    "module" : "SCSI-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "TruthValue",
+                            },
+                            "false" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """The value of true(1) is not mandatory neither is the write
+access.""",
+                },
+                "scsiDscTgtRowStatus" : {
+                    "module" : "SCSI-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required, and only one of the six
+enumerated values for the RowStatus textual convention need
+be supported, specifically: active(1).""",
+                },
+            }, # refinements
+
+        }, # compliance
+    }, # compliances
+
+}