logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/RFC1382-MIB.dic

@@ -0,0 +1,3820 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python RFC1382-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/RFC1382-MIB"
+
+MIB = {
+    "moduleName" : "RFC1382-MIB",
+
+    "RFC1382-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv1",
+    },
+
+    "imports" : (
+        {"module" : "RFC1155-SMI", "name" : "Counter"},
+        {"module" : "RFC1155-SMI", "name" : "Gauge"},
+        {"module" : "RFC1155-SMI", "name" : "TimeTicks"},
+        {"module" : "RFC-1212", "name" : "OBJECT-TYPE"},
+        {"module" : "RFC1213-MIB", "name" : "DisplayString"},
+        {"module" : "RFC1213-MIB", "name" : "transmission"},
+        {"module" : "RFC-1215", "name" : "TRAP-TYPE"},
+        {"module" : "RFC1271-MIB", "name" : "EntryStatus"},
+        {"module" : "RFC1381-MIB", "name" : "PositiveInteger"},
+        {"module" : "RFC1381-MIB", "name" : "IfIndexType"},
+    ),
+
+    "typedefs" : {
+        "X121Address" : {
+            "basetype" : "OctetString",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "17"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "17"
+            },
+        },
+    }, # typedefs
+
+    "nodes" : {
+        "x25" : {
+            "nodetype" : "node",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5",
+        }, # node
+        "x25AdmnTable" : {
+            "nodetype" : "table",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1",
+            "status" : "current",
+            "description" :
+                """This table contains the administratively
+set configuration parameters for an X.25
+Packet Level Entity (PLE).
+
+Most of the objects in this table have
+corresponding objects in the x25OperTable.
+This table contains the values as last set
+by the administrator.  The x25OperTable
+contains the values actually in use by an
+X.25 PLE.
+
+Changing an administrative value may or may
+not change a current operating value.  The
+operating value may not change until the
+interface is restarted.  Some
+implementations may change the values
+immediately upon changing the administrative
+table.  All implementations are required to
+load the values from the administrative
+table when initializing a PLE.""",
+        }, # table
+        "x25AdmnEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1",
+            "status" : "current",
+            "linkage" : [
+                "x25AdmnIndex",
+            ],
+            "description" :
+                """Entries of x25AdmnTable.""",
+        }, # row
+        "x25AdmnIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "IfIndexType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The ifIndex value for the X.25 Interface.""",
+        }, # column
+        "x25AdmnInterfaceMode" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "dte" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "dce" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "dxe" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """Identifies DCE/DTE mode in which the
+interface operates.  A value of dxe
+indicates the mode will be determined by XID
+negotiation.""",
+            "reference" :
+                """10733 5.9 interfaceMode""",
+        }, # column
+        "x25AdmnMaxActiveCircuits" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4096"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4096"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The maximum number of circuits this PLE can
+support; including PVCs.""",
+            "reference" :
+                """10733 5.9 maxActiveCircuits;
+See ISO 8208, Section 3.7""",
+        }, # column
+        "x25AdmnPacketSequencing" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "modulo8" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "modulo128" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The modulus of the packet sequence number
+space.""",
+            "reference" :
+                """10733 extendedPacketSequencing;
+See ISO 8208 Section 7.1.1""",
+        }, # column
+        "x25AdmnRestartTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The T20 restart timer in milliseconds.""",
+            "reference" :
+                """10733 5.9 restartTime
+See ISO 8208 Section 4.1, table 26""",
+        }, # column
+        "x25AdmnCallTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The T21 Call timer in milliseconds.""",
+            "reference" :
+                """10733 callTime;
+See ISO 8208 Section 5.2.1, table 26""",
+        }, # column
+        "x25AdmnResetTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The T22 Reset timer in milliseconds.""",
+            "reference" :
+                """10733 resetTime;
+See ISO 8208 Section 8.1, table 26""",
+        }, # column
+        "x25AdmnClearTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The T23 Clear timer in milliseconds.""",
+            "reference" :
+                """10733 clearTime;
+See ISO 8208 Section 5.5.1, table 26""",
+        }, # column
+        "x25AdmnWindowTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The T24 window status transmission timer in
+milliseconds.  A value of 2147483647
+indicates no window timer in use.""",
+            "reference" :
+                """10733 5.10.1 windowTime (opt);
+See ISO 8208 Section 11.2.2, table 26""",
+        }, # column
+        "x25AdmnDataRxmtTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The T25 data retransmission timer in
+milliseconds.  A value of 2147483647
+indicates no data retransmission timer in
+use.""",
+            "reference" :
+                """10733 5.10.1 dataRetransmissionTime (opt);
+See ISO 8208 Section 11.2.1, table 26""",
+        }, # column
+        "x25AdmnInterruptTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The T26 interrupt timer in milliseconds.  A
+value of 2147483647 indicates no interrupt
+timer in use.""",
+            "reference" :
+                """10733 interruptTime;
+See ISO 8208 Section 6.8.1, table 26""",
+        }, # column
+        "x25AdmnRejectTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The T27 Reject retransmission timer in
+milliseconds.  A value of 2147483647
+indicates no reject timer in use.""",
+            "reference" :
+                """10733 5.10.1 dataRejectTime (opt);
+See ISO 8208 Section 13.4.1, table 26""",
+        }, # column
+        "x25AdmnRegistrationRequestTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The T28 registration timer in milliseconds.
+A value of 2147483647 indicates no
+registration timer in use.""",
+            "reference" :
+                """10733 5.8.1 registrationRequestTime (opt)
+See ISO 8208    Section 13.1.1.1, table 26""",
+        }, # column
+        "x25AdmnMinimumRecallTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Minimum time interval between unsuccessful
+call attempts in milliseconds.""",
+            "reference" :
+                """10733 5.9 minimum RecallTimer""",
+        }, # column
+        "x25AdmnRestartCount" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The R20 restart retransmission count.""",
+            "reference" :
+                """10733 5.9 restartCount;
+See ISO 8208    Section 4.1, table 27""",
+        }, # column
+        "x25AdmnResetCount" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The r22 Reset retransmission count.""",
+            "reference" :
+                """10733 resetCount;
+See section ISO 8208 8.1, table 27""",
+        }, # column
+        "x25AdmnClearCount" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.17",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The r23 Clear retransmission count.""",
+            "reference" :
+                """10733 clearCount;
+See ISO 8208 Section 5.5.1, table 27""",
+        }, # column
+        "x25AdmnDataRxmtCount" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.18",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The R25 Data retransmission count.  This
+value is irrelevant if the
+x25AdmnDataRxmtTimer indicates no timer in
+use.""",
+            "reference" :
+                """10733 5.10.1 dataRetransmissionCount (opt)
+See ISO 8208 Section 11.2.1, table 27""",
+        }, # column
+        "x25AdmnRejectCount" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.19",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The R27 reject retransmission count.  This
+value is irrelevant if the
+x25AdmnRejectTimer indicates no timer in
+use.""",
+            "reference" :
+                """10733 5.10.1 dataRejectCount (opt)""",
+        }, # column
+        "x25AdmnRegistrationRequestCount" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.20",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The R28 Registration retransmission Count.
+This value is irrelevant if the
+x25AdmnRegistrationRequestTimer indicates no
+timer in use.""",
+            "reference" :
+                """10733 5.8.1 registrationRequestCount (opt);
+See ISO 8208    Section 13.1.1.1, table 27""",
+        }, # column
+        "x25AdmnNumberPVCs" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.21",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4096"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4096"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The number of PVC configured for this PLE.
+The PVCs use channel numbers from 1 to this
+number.""",
+        }, # column
+        "x25AdmnDefCallParamId" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.22",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "ObjectIdentifier"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This identifies the instance of the
+x25CallParmIndex for the entry in the
+x25CallParmTable which contains the default
+call parameters for this PLE.""",
+        }, # column
+        "x25AdmnLocalAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.23",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1382-MIB", "name" : "X121Address"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The local address for this PLE subnetwork.
+A zero length address maybe returned by PLEs
+that only support PVCs.""",
+            "reference" :
+                """10733 5.9 localDTEAddress""",
+        }, # column
+        "x25AdmnProtocolVersionSupported" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.1.1.24",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "ObjectIdentifier"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Identifies the version of the X.25 protocol
+this interface should support.  Object
+identifiers for common versions are defined
+below in the x25ProtocolVersion subtree.""",
+            "reference" :
+                """10733 5.9 protocolVersionSupported""",
+        }, # column
+        "x25OperTable" : {
+            "nodetype" : "table",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2",
+            "status" : "current",
+            "description" :
+                """The operation parameters in use by the X.25
+PLE.""",
+        }, # table
+        "x25OperEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1",
+            "status" : "current",
+            "linkage" : [
+                "x25OperIndex",
+            ],
+            "description" :
+                """Entries of x25OperTable.""",
+        }, # row
+        "x25OperIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "IfIndexType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The ifIndex value for the X.25 interface.""",
+        }, # column
+        "x25OperInterfaceMode" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "dte" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "dce" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "dxe" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Identifies DCE/DTE mode in which the
+interface operates.  A value of dxe
+indicates the role will be determined by XID
+negotiation at the Link Layer and that
+negotiation has not yet taken place.""",
+            "reference" :
+                """10733 5.9 interfaceMode""",
+        }, # column
+        "x25OperMaxActiveCircuits" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4096"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4096"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Maximum number of circuits this PLE can
+support.""",
+            "reference" :
+                """10733 5.9 maxActiveCircuits
+See ISO 8208, Section 3.7""",
+        }, # column
+        "x25OperPacketSequencing" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "modulo8" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "modulo128" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The modulus of the packet sequence number
+space.""",
+            "reference" :
+                """10733 extendedPacketSequencing;
+See ISO 8208    Section 7.1.1""",
+        }, # column
+        "x25OperRestartTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The T20 restart timer in milliseconds.""",
+            "reference" :
+                """10733 5.9 restartTime;
+See ISO 8208    Section 4.1, table 26""",
+        }, # column
+        "x25OperCallTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The T21 Call timer in milliseconds.""",
+            "reference" :
+                """10733 callTime;
+See ISO 8208 Section 5.2.1, table 26""",
+        }, # column
+        "x25OperResetTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The T22 Reset timer in milliseconds.""",
+            "reference" :
+                """10733 resetTime;
+See ISO 8208    Section 8.1, table 26""",
+        }, # column
+        "x25OperClearTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The T23 Clear timer in milliseconds.""",
+            "reference" :
+                """10733 clearTime;
+See ISO 8208 Section 5.5.1, table 26""",
+        }, # column
+        "x25OperWindowTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The T24 window status transmission timer
+milliseconds.  A value of 2147483647
+indicates no window timer in use.""",
+            "reference" :
+                """10733 5.10.1 windowTime (opt);
+See ISO 8208 Section 11.2.2, table 26""",
+        }, # column
+        "x25OperDataRxmtTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The T25 Data Retransmission timer in
+milliseconds.  A value of 2147483647
+indicates no data retransmission timer in
+use.""",
+            "reference" :
+                """10733 5.10.1 dataRetransmissionTime (opt);
+See ISO 8208 Section 11.2.1, table 26""",
+        }, # column
+        "x25OperInterruptTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The T26 Interrupt timer in milliseconds.  A
+value of 2147483647 indicates interrupts are
+not being used.""",
+            "reference" :
+                """10733 interruptTime;
+See ISO 8208 Section 6.8.1, table 26""",
+        }, # column
+        "x25OperRejectTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The T27 Reject retransmission timer in
+milliseconds.  A value of 2147483647
+indicates no reject timer in use.""",
+            "reference" :
+                """10733 5.10.1 dataRejectTime (opt);
+See ISO 8208 Section 13.4.1, table 26""",
+        }, # column
+        "x25OperRegistrationRequestTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The T28 registration timer in milliseconds.
+A value of 2147483647 indicates no
+registration timer in use.""",
+            "reference" :
+                """10733 5.8.1 registrationRequestTime (opt);
+See ISO 8208    Section 13.1.1.1, table 26""",
+        }, # column
+        "x25OperMinimumRecallTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Minimum time interval between unsuccessful
+call attempts in milliseconds.""",
+            "reference" :
+                """10733 5.9 minimum RecallTimer""",
+        }, # column
+        "x25OperRestartCount" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The R20 restart retransmission count.""",
+            "reference" :
+                """10733 5.9 restartCount
+See ISO 8208    Section 4.1, table 27""",
+        }, # column
+        "x25OperResetCount" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The r22 Reset retransmission count.""",
+            "reference" :
+                """10733 resetCount;
+See section ISO 8208 8.1, table 27""",
+        }, # column
+        "x25OperClearCount" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.17",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The r23 Clear retransmission count.""",
+            "reference" :
+                """10733 clearCount;
+See ISO 8208 Section 5.5.1, table 27""",
+        }, # column
+        "x25OperDataRxmtCount" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.18",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The R25 Data retransmission count.  This
+value is undefined if the
+x25OperDataRxmtTimer indicates no timer in
+use.""",
+            "reference" :
+                """10733 5.10.1 dataRetransmissionCount (opt);
+See ISO 8208 Section 11.2.1, table 27""",
+        }, # column
+        "x25OperRejectCount" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.19",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The R27 reject retransmission count.  This
+value is undefined if the x25OperRejectTimer
+indicates no timer in use.""",
+            "reference" :
+                """10733 5.10.1 dataRejectCount (opt)""",
+        }, # column
+        "x25OperRegistrationRequestCount" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.20",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The R28 Registration retransmission Count.
+This value is undefined if the
+x25OperREgistrationRequestTimer indicates no
+timer in use.""",
+            "reference" :
+                """10733 5.8.1 registrationRequestCount (opt);
+See ISO 8208    Section 13.1.1.1, table 27""",
+        }, # column
+        "x25OperNumberPVCs" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.21",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4096"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4096"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of PVC configured for this PLE.
+The PVCs use channel numbers from 1 to this
+number.""",
+        }, # column
+        "x25OperDefCallParamId" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.22",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "ObjectIdentifier"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This identifies the instance of the
+x25CallParmIndex for the entry in the
+x25CallParmTable that contains the default
+call parameters for this PLE.""",
+        }, # column
+        "x25OperLocalAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.23",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1382-MIB", "name" : "X121Address"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The local address for this PLE subnetwork.
+A zero length address maybe returned by PLEs
+that only support PVCs.""",
+            "reference" :
+                """10733 5.9 localDTEAddress""",
+        }, # column
+        "x25OperDataLinkId" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.24",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "ObjectIdentifier"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This identifies the instance of the index
+object in the first table of the most device
+specific MIB for the interface used by this
+PLE.""",
+        }, # column
+        "x25OperProtocolVersionSupported" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.2.1.25",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "ObjectIdentifier"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Identifies the version of the X.25 protocol
+this interface supports.  Object identifiers
+for common versions are defined below in the
+x25ProtocolVersion subtree.""",
+            "reference" :
+                """10733 5.9 protocolVersionSupported""",
+        }, # column
+        "x25StatTable" : {
+            "nodetype" : "table",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3",
+            "status" : "current",
+            "description" :
+                """Statistics information about this X.25
+PLE.""",
+        }, # table
+        "x25StatEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1",
+            "status" : "current",
+            "linkage" : [
+                "x25StatIndex",
+            ],
+            "description" :
+                """Entries of the x25StatTable.""",
+        }, # row
+        "x25StatIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "IfIndexType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The ifIndex value for the X.25 interface.""",
+        }, # column
+        "x25StatInCalls" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of incoming calls received.""",
+        }, # column
+        "x25StatInCallRefusals" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of incoming calls refused.  This
+includes calls refused by the PLE and by
+higher layers.  This also includes calls
+cleared because of restricted fast select.""",
+        }, # column
+        "x25StatInProviderInitiatedClears" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of clear requests with a cause
+code other than DTE initiated.""",
+            "reference" :
+                """10733 providerInitiatedDisconnect""",
+        }, # column
+        "x25StatInRemotelyInitiatedResets" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of reset requests received with
+cause code DTE initiated.""",
+            "reference" :
+                """10733 remotelyInitiatedResets""",
+        }, # column
+        "x25StatInProviderInitiatedResets" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of reset requests received with
+cause code other than DTE initiated.""",
+            "reference" :
+                """10733 ProviderInitiatedResets""",
+        }, # column
+        "x25StatInRestarts" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of remotely initiated (including
+provider initiated) restarts experienced by
+the PLE excluding the restart associated
+with bringing up the PLE interface.  This
+only counts restarts received when the PLE
+already has an established connection with
+the remove PLE.""",
+            "reference" :
+                """10733 5.9 remotelyInitiatedRestarts""",
+        }, # column
+        "x25StatInDataPackets" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of data packets received.""",
+            "reference" :
+                """10733 5.9 dataPacketsReceived.""",
+        }, # column
+        "x25StatInAccusedOfProtocolErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of packets received containing a
+procedure error cause code.  These include
+clear, reset, restart, or diagnostic
+packets.""",
+            "reference" :
+                """CD 10733 5.9 accusedOfProtocolError""",
+        }, # column
+        "x25StatInInterrupts" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of interrupt packets received by
+the PLE or over the PVC/VC.""",
+            "reference" :
+                """10733 interruptPacketsReceived""",
+        }, # column
+        "x25StatOutCallAttempts" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of calls attempted.""",
+            "reference" :
+                """10733 5.9 callAttempts""",
+        }, # column
+        "x25StatOutCallFailures" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of call attempts which failed.
+This includes calls that were cleared
+because of restrictive fast select.""",
+        }, # column
+        "x25StatOutInterrupts" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of interrupt packets send by the
+PLE or over the PVC/VC.""",
+            "reference" :
+                """10733 InterruptPacketsSent""",
+        }, # column
+        "x25StatOutDataPackets" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of data packets sent by this
+PLE.""",
+            "reference" :
+                """10733 dataPacketSent""",
+        }, # column
+        "x25StatOutgoingCircuits" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Gauge"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of active outgoing circuits.
+This includes call requests sent but not yet
+confirmed.  This does not count PVCs.""",
+        }, # column
+        "x25StatIncomingCircuits" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Gauge"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of active Incoming Circuits.
+This includes call indications received but
+not yet acknowledged.  This does not count
+PVCs.""",
+        }, # column
+        "x25StatTwowayCircuits" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.17",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Gauge"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of active two-way Circuits.
+This includes call requests sent but not yet
+confirmed.  This does not count PVCs.""",
+        }, # column
+        "x25StatRestartTimeouts" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.18",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times the T20 restart timer
+expired.""",
+            "reference" :
+                """10733 5.9 restartTimeouts""",
+        }, # column
+        "x25StatCallTimeouts" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.19",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times the T21 call timer
+expired.""",
+            "reference" :
+                """10733 5.9 callTimeouts""",
+        }, # column
+        "x25StatResetTimeouts" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.20",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times the T22 reset timer
+expired.""",
+            "reference" :
+                """10733 5.9 resetTimeouts""",
+        }, # column
+        "x25StatClearTimeouts" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.21",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times the T23 clear timer
+expired.""",
+            "reference" :
+                """10733 5.9 clearTimeouts""",
+        }, # column
+        "x25StatDataRxmtTimeouts" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.22",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times the T25 data timer
+expired.""",
+            "reference" :
+                """10733 5.9 dataRetransmissionsTimerExpiries""",
+        }, # column
+        "x25StatInterruptTimeouts" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.23",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times the T26 interrupt timer
+expired.""",
+            "reference" :
+                """10733 5.9 interruptTimerExpires""",
+        }, # column
+        "x25StatRetryCountExceededs" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.24",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times a retry counter was
+exhausted.""",
+            "reference" :
+                """10733 5.9 retryCountsExceeded""",
+        }, # column
+        "x25StatClearCountExceededs" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.3.1.25",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times the R23 clear count was
+exceeded.""",
+            "reference" :
+                """10733 5.9 clearCountsExceeded""",
+        }, # column
+        "x25ChannelTable" : {
+            "nodetype" : "table",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.4",
+            "status" : "current",
+            "description" :
+                """These objects contain information about the
+channel number configuration in an X.25 PLE.
+These values are the configured values.
+changes in these values after the interfaces
+has started may not be reflected in the
+operating PLE.""",
+            "reference" :
+                """See ISO 8208, Section 3.7""",
+        }, # table
+        "x25ChannelEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.4.1",
+            "status" : "current",
+            "linkage" : [
+                "x25ChannelIndex",
+            ],
+            "description" :
+                """Entries of x25ChannelTable.""",
+            "reference" :
+                """This provides the information available
+in 10733 logicalChannelAssignments.""",
+        }, # row
+        "x25ChannelIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.4.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "IfIndexType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The ifIndex value for the X.25 Interface.""",
+        }, # column
+        "x25ChannelLIC" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.4.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4095"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4095"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """Lowest Incoming channel.""",
+        }, # column
+        "x25ChannelHIC" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.4.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4095"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4095"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """Highest Incoming channel.  A value of zero
+indicates no channels in this range.""",
+        }, # column
+        "x25ChannelLTC" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.4.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4095"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4095"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """Lowest Two-way channel.""",
+        }, # column
+        "x25ChannelHTC" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.4.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4095"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4095"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """Highest Two-way channel.  A value of zero
+indicates no channels in this range.""",
+        }, # column
+        "x25ChannelLOC" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.4.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4095"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4095"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """Lowest outgoing channel.""",
+        }, # column
+        "x25ChannelHOC" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.4.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4095"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4095"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """Highest outgoing channel.  A value of zero
+indicates no channels in this range.""",
+        }, # column
+        "x25CircuitTable" : {
+            "nodetype" : "table",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5",
+            "status" : "current",
+            "description" :
+                """These objects contain general information
+about a specific circuit of an X.25 PLE.""",
+        }, # table
+        "x25CircuitEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5.1",
+            "status" : "current",
+            "linkage" : [
+                "x25CircuitIndex",
+                "x25CircuitChannel",
+            ],
+            "description" :
+                """Entries of x25CircuitTable.""",
+        }, # row
+        "x25CircuitIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "IfIndexType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The ifIndex value for the X.25 Interface.""",
+        }, # column
+        "x25CircuitChannel" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4095"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4095"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The channel number for this circuit.""",
+        }, # column
+        "x25CircuitStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "invalid" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "closed" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "calling" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "open" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "clearing" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "pvc" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "pvcResetting" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                    "startClear" : {
+                        "nodetype" : "namednumber",
+                        "number" : "8"
+                    },
+                    "startPvcResetting" : {
+                        "nodetype" : "namednumber",
+                        "number" : "9"
+                    },
+                    "other" : {
+                        "nodetype" : "namednumber",
+                        "number" : "10"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object reports the current status of
+the circuit.
+
+An existing instance of this object can only
+be set to startClear, startPvcResetting, or
+invalid.  An instance with the value calling
+or open can only be set to startClear and
+that action will start clearing the circuit.
+An instance with the value PVC can only be
+set to startPvcResetting or invalid and that
+action resets the PVC or deletes the circuit
+respectively.  The values startClear or
+startPvcResetting will never be returned by
+an agent.  An attempt to set the status of
+an existing instance to a value other than
+one of these values will result in an error.
+
+A non-existing instance can be set to PVC to
+create a PVC if the implementation supports
+dynamic creation of PVCs.  Some
+implementations may only allow creation and
+deletion of PVCs if the interface is down.
+Since the instance identifier will supply
+the PLE index and the channel number,
+setting this object alone supplies
+sufficient information to create the
+instance.  All the DEFVAL clauses for the
+other objects of this table are appropriate
+for creating a PVC; PLEs creating entries
+for placed or accepted calls will use values
+appropriate for the call rather than the
+value of the DEFVAL clause.  Two managers
+trying to create the same PVC can determine
+from the return code which manager succeeded
+and which failed (the failing manager fails
+because it can not set a value of PVC for an
+existing object).
+An entry in the closed or invalid state may
+be deleted or reused at the agent's
+convence.  If the entry is kept in the
+closed state, the values of the parameters
+associated with the entry must be correct.
+Closed implies the values in the circuit
+table are correct.
+
+The value of invalid indicates the other
+values in the table are invalid.  Many
+agents may never return a value of invalid
+because they dynamically allocate and free
+unused table entries.  An agent for a
+statically configured systems can return
+invalid to indicate the entry has not yet
+been used so the counters contain no
+information.""",
+            "reference" :
+                """See ISO 8208,
+table 33 for (p<n>) state table""",
+        }, # column
+        "x25CircuitEstablishTime" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "TimeTicks"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime when the channel was
+associated with this circuit.  For outgoing
+SVCs, this is the time the first call packet
+was sent.  For incoming SVCs, this is the
+time the call indication was received.  For
+PVCs this is the time the PVC was able to
+pass data to a higher layer entity without
+loss of data.""",
+        }, # column
+        "x25CircuitDirection" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "incoming" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "outgoing" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "pvc" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "pvc",
+            "description" :
+                """The direction of the call that established
+this circuit.""",
+            "reference" :
+                """10733 direction""",
+        }, # column
+        "x25CircuitInOctets" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of octets of user data delivered
+to upper layer.""",
+            "reference" :
+                """5.11 octetsReceivedCounter""",
+        }, # column
+        "x25CircuitInPdus" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of PDUs received for this
+circuit.""",
+            "reference" :
+                """10733 5.11 dataPacketsReceived""",
+        }, # column
+        "x25CircuitInRemotelyInitiatedResets" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of Resets received for this
+circuit with cause code of DTE initiated.""",
+            "reference" :
+                """10733 remotelyInitiatedResets""",
+        }, # column
+        "x25CircuitInProviderInitiatedResets" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of Resets received for this
+circuit with cause code other than DTE
+initiated.""",
+            "reference" :
+                """10733 ProviderInitiatedResets""",
+        }, # column
+        "x25CircuitInInterrupts" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of interrupt packets received
+for this circuit.""",
+            "reference" :
+                """10733 interruptPacketsReceived""",
+        }, # column
+        "x25CircuitOutOctets" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of octets of user data sent for
+this circuit.""",
+            "reference" :
+                """10733 5.11 octetsSentCounter""",
+        }, # column
+        "x25CircuitOutPdus" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of PDUs sent for this circuit.""",
+            "reference" :
+                """10733 5.11 dataPacketsSent""",
+        }, # column
+        "x25CircuitOutInterrupts" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of interrupt packets sent on
+this circuit.""",
+            "reference" :
+                """10733 interruptPacketsSent""",
+        }, # column
+        "x25CircuitDataRetransmissionTimeouts" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times the T25 data
+retransmission timer expired for this
+circuit.""",
+            "reference" :
+                """10733 5.11 dataRetransmissionTimerExpiries""",
+        }, # column
+        "x25CircuitResetTimeouts" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times the T22 reset timer
+expired for this circuit.""",
+            "reference" :
+                """10733 5.11 resetTimeouts""",
+        }, # column
+        "x25CircuitInterruptTimeouts" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of times the T26 Interrupt timer
+expired for this circuit.""",
+            "reference" :
+                """10733 interruptTimerExpiries""",
+        }, # column
+        "x25CircuitCallParamId" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5.1.17",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "ObjectIdentifier"},
+            },
+            "access" : "readwrite",
+            "default" : "0.0",
+            "description" :
+                """This identifies the instance of the
+x25CallParmIndex for the entry in the
+x25CallParmTable which contains the call
+parameters in use with this circuit.  The
+entry referenced must contain the values
+that are currently in use by the circuit
+rather than proposed values.  A value of
+NULL indicates the circuit is a PVC or is
+using all the default parameters.""",
+        }, # column
+        "x25CircuitCalledDteAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5.1.18",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1382-MIB", "name" : "X121Address"},
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """For incoming calls, this is the called
+address from the call indication packet.
+For outgoing calls, this is the called
+address from the call confirmation packet.
+This will be zero length for PVCs.""",
+            "reference" :
+                """10733 calledDTEAddress""",
+        }, # column
+        "x25CircuitCallingDteAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5.1.19",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1382-MIB", "name" : "X121Address"},
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """For incoming calls, this is the calling
+address from the call indication packet.
+For outgoing calls, this is the calling
+address from the call confirmation packet.
+This will be zero length for PVCs.""",
+            "reference" :
+                """10733 callingDTEAddress""",
+        }, # column
+        "x25CircuitOriginallyCalledAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5.1.20",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1382-MIB", "name" : "X121Address"},
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """For incoming calls, this is the address in
+the call Redirection or Call Deflection
+Notification facility if the call was
+deflected or redirected, otherwise it will
+be called address from the call indication
+packet.  For outgoing calls, this is the
+address from the call request packet.  This
+will be zero length for PVCs.""",
+            "reference" :
+                """10733 originallyCalledAddress""",
+        }, # column
+        "x25CircuitDescr" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.5.1.21",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "RFC1213-MIB",
+                        "type" : "DisplayString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """A descriptive string associated with this
+circuit.  This provides a place for the
+agent to supply any descriptive information
+it knows about the use or owner of the
+circuit.  The agent may return the process
+identifier and user name for the process
+using the circuit.  Alternative the agent
+may return the name of the configuration
+entry that caused a bridge to establish the
+circuit.  A zero length value indicates the
+agent doesn't have any additional
+information.""",
+        }, # column
+        "x25ClearedCircuitEntriesRequested" : {
+            "nodetype" : "scalar",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The requested number of entries for the
+agent to keep in the x25ClearedCircuit
+table.""",
+        }, # scalar
+        "x25ClearedCircuitEntriesGranted" : {
+            "nodetype" : "scalar",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The actual number of entries the agent will
+keep in the x25ClearedCircuit Table.""",
+        }, # scalar
+        "x25ClearedCircuitTable" : {
+            "nodetype" : "table",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.8",
+            "status" : "current",
+            "description" :
+                """A table of entries about closed circuits.
+Entries must be made in this table whenever
+circuits are closed and the close request or
+close indication packet contains a clearing
+cause other than DTE Originated or a
+Diagnostic code field other than Higher
+Layer Initiated disconnection-normal.  An
+agent may optionally make entries for normal
+closes (to record closing facilities or
+other information).
+
+Agents will delete the oldest entry in the
+table when adding a new entry would exceed
+agent resources.  Agents are required to
+keep the last entry put in the table and may
+keep more entries.  The object
+x25OperClearEntriesGranted returns the
+maximum number of entries kept in the
+table.""",
+            "reference" :
+                """See ISO 8208 Section 12.2.3.1.1
+and 12.2.3.1.2""",
+        }, # table
+        "x25ClearedCircuitEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.8.1",
+            "status" : "current",
+            "linkage" : [
+                "x25ClearedCircuitIndex",
+            ],
+            "description" :
+                """Information about a cleared circuit.""",
+        }, # row
+        "x25ClearedCircuitIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.8.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readonly",
+            "description" :
+                """An index that uniquely distinguishes one
+entry in the clearedCircuitTable from
+another.  This index will start at
+2147483647 and will decrease by one for each
+new entry added to the table.  Upon reaching
+one, the index will reset to 2147483647.
+Because the index starts at 2147483647 and
+decreases, a manager may do a getnext on
+entry zero and obtain the most recent entry.
+When the index has the value of 1, the next
+entry will delete all entries in the table
+and that entry will be numbered 2147483647.""",
+        }, # column
+        "x25ClearedCircuitPleIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.8.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "IfIndexType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of ifIndex for the PLE which
+cleared the circuit that created the entry.""",
+        }, # column
+        "x25ClearedCircuitTimeEstablished" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.8.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "TimeTicks"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime when the circuit was
+established.  This will be the same value
+that was in the x25CircuitEstablishTime for
+the circuit.""",
+        }, # column
+        "x25ClearedCircuitTimeCleared" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.8.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "TimeTicks"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime when the circuit was
+cleared.  For locally initiated clears, this
+will be the time when the clear confirmation
+was received.  For remotely initiated
+clears, this will be the time when the clear
+indication was received.""",
+        }, # column
+        "x25ClearedCircuitChannel" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.8.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4095"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4095"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The channel number for the circuit that was
+cleared.""",
+        }, # column
+        "x25ClearedCircuitClearingCause" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.8.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The Clearing Cause from the clear request
+or clear indication packet that cleared the
+circuit.""",
+            "reference" :
+                """See ISO 8208 Section 12.2.3.1.1""",
+        }, # column
+        "x25ClearedCircuitDiagnosticCode" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.8.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The Diagnostic Code from the clear request
+or clear indication packet that cleared the
+circuit.""",
+            "reference" :
+                """See ISO 8208 Section 12.2.3.1.2""",
+        }, # column
+        "x25ClearedCircuitInPdus" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.8.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of PDUs received on the
+circuit.""",
+        }, # column
+        "x25ClearedCircuitOutPdus" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.8.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1155-SMI", "name" : "Counter"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of PDUs transmitted on the
+circuit.""",
+        }, # column
+        "x25ClearedCircuitCalledAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.8.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1382-MIB", "name" : "X121Address"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The called address from the cleared
+circuit.""",
+        }, # column
+        "x25ClearedCircuitCallingAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.8.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1382-MIB", "name" : "X121Address"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The calling address from the cleared
+circuit.""",
+        }, # column
+        "x25ClearedCircuitClearFacilities" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.8.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "109"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "109"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The facilities field from the clear request
+or clear indication packet that cleared the
+circuit.  A size of zero indicates no
+facilities were present.""",
+        }, # column
+        "x25CallParmTable" : {
+            "nodetype" : "table",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9",
+            "status" : "current",
+            "description" :
+                """These objects contain the parameters that
+can be varied between X.25 calls.  The
+entries in this table are independent of the
+PLE.  There exists only one of these tables
+for the entire system.  The indexes for the
+entries are independent of any PLE or any
+circuit.  Other tables reference entries in
+this table.  Entries in this table can be
+used for default PLE parameters, for
+parameters to use to place/answer a call,
+for the parameters currently in use for a
+circuit, or parameters that were used by a
+circuit.
+
+The number of references to a given set of
+parameters can be found in the
+x25CallParmRefCount object sharing the same
+instance identifier with the parameters.
+The value of this reference count also
+affects the access of the objects in this
+table.  An object in this table with the
+same instance identifier as the instance
+identifier of an x25CallParmRefCount must be
+consider associated with that reference
+count.  An object with an associated
+reference count of zero can be written (if
+its ACCESS clause allows it).  An object
+with an associated reference count greater
+than zero can not be written (regardless of
+the ACCESS clause).  This ensures that a set
+of call parameters being referenced from
+another table can not be modified or changed
+in a ways inappropriate for continued use by
+that table.""",
+        }, # table
+        "x25CallParmEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1",
+            "status" : "current",
+            "linkage" : [
+                "x25CallParmIndex",
+            ],
+            "description" :
+                """Entries of x25CallParmTable.""",
+        }, # row
+        "x25CallParmIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A value that distinguishes this entry from
+another entry.  Entries in this table are
+referenced from other objects which identify
+call parameters.
+
+It is impossible to know which other objects
+in the MIB reference entries in the table by
+looking at this table.  Because of this,
+changes to parameters must be accomplished
+by creating a new entry in this table and
+then changing the referencing table to
+identify the new entry.
+
+Note that an agent will only use the values
+in this table when another table is changed
+to reference those values.  The number of
+other tables that reference an index object
+in this table can be found in
+x25CallParmRefCount.  The value of the
+reference count will affect the writability
+of the objects as explained above.
+
+Entries in this table which have a reference
+count of zero maybe deleted at the convence
+of the agent.  Care should be taken by the
+agent to give the NMS sufficient time to
+create a reference to newly created entries.
+
+Should a Management Station not find a free
+index with which to create a new entry, it
+may feel free to delete entries with a
+reference count of zero.  However in doing
+so the Management Station much realize it
+may impact other Management Stations.""",
+        }, # column
+        "x25CallParmStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1271-MIB", "name" : "EntryStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The status of this call parameter entry.
+See RFC 1271 for details of usage.""",
+        }, # column
+        "x25CallParmRefCount" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"RFC1381-MIB", "name" : "PositiveInteger"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of references know by a
+management station to exist to this set of
+call parameters.  This is the number of
+other objects that have returned a value of,
+and will return a value of, the index for
+this set of call parameters.  Examples of
+such objects are the x25AdmnDefCallParamId,
+x25OperDataLinkId, or x25AdmnDefCallParamId
+objects defined above.""",
+        }, # column
+        "x25CallParmInPacketSize" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4096"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4096"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "128",
+            "description" :
+                """The maximum receive packet size in octets
+for a circuit.  A size of zero for a circuit
+means use the PLE default size.  A size of
+zero for the PLE means use a default size of
+128.""",
+            "reference" :
+                """10733 proposedPacketSize;
+See ISO 8208 Section 15.2.2.1.1""",
+        }, # column
+        "x25CallParmOutPacketSize" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4096"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4096"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "128",
+            "description" :
+                """The maximum transmit packet size in octets
+for a circuit.  A size of zero for a circuit
+means use the PLE default size.  A size of
+zero for the PLE default means use a default
+size of 128.""",
+            "reference" :
+                """10733 proposedPacketSize;
+See ISO 8208 Section 15.2.2.1.1""",
+        }, # column
+        "x25CallParmInWindowSize" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "127"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "127"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "2",
+            "description" :
+                """The receive window size for a circuit.  A
+size of zero for a circuit means use the PLE
+default size.  A size of zero for the PLE
+default means use 2.""",
+            "reference" :
+                """10733 proposedWindowSize;
+See ISO 8208 Section 15.2.2.1.2""",
+        }, # column
+        "x25CallParmOutWindowSize" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "127"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "127"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "2",
+            "description" :
+                """The transmit window size for a circuit.  A
+size of zero for a circuit means use the PLE
+default size.  A size of zero for the PLE
+default means use 2.""",
+            "reference" :
+                """10733 proposedWindowSize;
+See ISO 8208 Section 15.2.2.1.2""",
+        }, # column
+        "x25CallParmAcceptReverseCharging" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "default" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "accept" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "refuse" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "neverAccept" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "refuse",
+            "description" :
+                """An enumeration defining if the PLE will
+accept or refuse charges.  A value of
+default for a circuit means use the PLE
+default value.  A value of neverAccept is
+only used for the PLE default and indicates
+the PLE will never accept reverse charging.
+A value of default for a PLE default means
+refuse.""",
+            "reference" :
+                """10733 acceptReverseCharging""",
+        }, # column
+        "x25CallParmProposeReverseCharging" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "default" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "reverse" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "local" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "local",
+            "description" :
+                """An enumeration defining if the PLE should
+propose reverse or local charging.  The
+value of default for a circuit means use the
+PLE default.  The value of default for the
+PLE default means use local.""",
+            "reference" :
+                """10733 proposedPacketSize;
+See ISO 8208 Section 15.2.2.6""",
+        }, # column
+        "x25CallParmFastSelect" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "default" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "notSpecified" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "fastSelect" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "restrictedFastResponse" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "noFastSelect" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "noRestrictedFastResponse" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "noFastSelect",
+            "description" :
+                """Expresses preference for use of fast select
+facility.  The value of default for a
+circuit is the PLE default.  A value of
+default for the PLE means noFastSelect.  A
+value of noFastSelect or
+noRestrictedFastResponse indicates a circuit
+may not use fast select or restricted fast
+response.""",
+            "reference" :
+                """10733 fastSelect;
+Sec ISO 8208 Section 15.2.2.6""",
+        }, # column
+        "x25CallParmInThruPutClasSize" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "tcReserved1" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "tcReserved2" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "tc75" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "tc150" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "tc300" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "tc600" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "tc1200" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                    "tc2400" : {
+                        "nodetype" : "namednumber",
+                        "number" : "8"
+                    },
+                    "tc4800" : {
+                        "nodetype" : "namednumber",
+                        "number" : "9"
+                    },
+                    "tc9600" : {
+                        "nodetype" : "namednumber",
+                        "number" : "10"
+                    },
+                    "tc19200" : {
+                        "nodetype" : "namednumber",
+                        "number" : "11"
+                    },
+                    "tc48000" : {
+                        "nodetype" : "namednumber",
+                        "number" : "12"
+                    },
+                    "tc64000" : {
+                        "nodetype" : "namednumber",
+                        "number" : "13"
+                    },
+                    "tcReserved14" : {
+                        "nodetype" : "namednumber",
+                        "number" : "14"
+                    },
+                    "tcReserved15" : {
+                        "nodetype" : "namednumber",
+                        "number" : "15"
+                    },
+                    "tcReserved0" : {
+                        "nodetype" : "namednumber",
+                        "number" : "16"
+                    },
+                    "tcNone" : {
+                        "nodetype" : "namednumber",
+                        "number" : "17"
+                    },
+                    "tcDefault" : {
+                        "nodetype" : "namednumber",
+                        "number" : "18"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "tcNone",
+            "description" :
+                """The incoming throughput class to negotiate.
+A value of tcDefault for a circuit means use
+the PLE default.  A value of tcDefault for
+the PLE default means tcNone.  A value of
+tcNone means do not negotiate throughtput
+class.""",
+            "reference" :
+                """See ISO 8208 Section 15.2.2.2, table 18""",
+        }, # column
+        "x25CallParmOutThruPutClasSize" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "tcReserved1" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "tcReserved2" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "tc75" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "tc150" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "tc300" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "tc600" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "tc1200" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                    "tc2400" : {
+                        "nodetype" : "namednumber",
+                        "number" : "8"
+                    },
+                    "tc4800" : {
+                        "nodetype" : "namednumber",
+                        "number" : "9"
+                    },
+                    "tc9600" : {
+                        "nodetype" : "namednumber",
+                        "number" : "10"
+                    },
+                    "tc19200" : {
+                        "nodetype" : "namednumber",
+                        "number" : "11"
+                    },
+                    "tc48000" : {
+                        "nodetype" : "namednumber",
+                        "number" : "12"
+                    },
+                    "tc64000" : {
+                        "nodetype" : "namednumber",
+                        "number" : "13"
+                    },
+                    "tcReserved14" : {
+                        "nodetype" : "namednumber",
+                        "number" : "14"
+                    },
+                    "tcReserved15" : {
+                        "nodetype" : "namednumber",
+                        "number" : "15"
+                    },
+                    "tcReserved0" : {
+                        "nodetype" : "namednumber",
+                        "number" : "16"
+                    },
+                    "tcNone" : {
+                        "nodetype" : "namednumber",
+                        "number" : "17"
+                    },
+                    "tcDefault" : {
+                        "nodetype" : "namednumber",
+                        "number" : "18"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "tcNone",
+            "description" :
+                """The outgoing throughput class to negotiate.
+A value of tcDefault for a circuit means use
+the PLE default.  A value of tcDefault for
+the PLE default means use tcNone.  A value
+of tcNone means do not negotiate throughtput
+class.""",
+            "reference" :
+                """See ISO 8208 Section 15.2.2.2, table 18""",
+        }, # column
+        "x25CallParmCug" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "RFC1213-MIB",
+                        "type" : "DisplayString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """The Closed User Group to specify.  This
+consists of two or four octets containing
+the characters 0 through 9.  A zero length
+string indicates no facility requested.  A
+string length of three containing the
+characters DEF for a circuit means use the
+PLE default, (the PLE default parameter may
+not reference an entry of DEF.)""",
+            "reference" :
+                """See ISO 8208 Section 15.2.2.3""",
+        }, # column
+        "x25CallParmCugoa" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "RFC1213-MIB",
+                        "type" : "DisplayString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """The Closed User Group with Outgoing Access
+to specify.  This consists of two or four
+octets containing the characters 0 through
+9.  A string length of three containing the
+characters DEF for a circuit means use the
+PLE default (the PLE default parameters may
+not reference an entry of DEF).  A zero
+length string indicates no facility
+requested.""",
+            "reference" :
+                """See ISO 8208 Section 15.2.2.4""",
+        }, # column
+        "x25CallParmBcug" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "RFC1213-MIB",
+                        "type" : "DisplayString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "3"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """The Bilateral Closed User Group to specify.
+This consists of two octets containing the
+characters 0 through 9.  A string length of
+three containing the characters DEF for a
+circuit means use the PLE default (the PLE
+default parameter may not reference an entry
+of DEF).  A zero length string indicates no
+facility requested.""",
+            "reference" :
+                """See ISO 8208 Section 15.2.2.5""",
+        }, # column
+        "x25CallParmNui" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "108"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "108"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """The Network User Identifier facility.  This
+is binary value to be included immediately
+after the length field.  The PLE will supply
+the length octet.  A zero length string
+indicates no facility requested.  This value
+is ignored for the PLE default parameters
+entry.""",
+            "reference" :
+                """See ISO 8208 Section 15.2.2.7""",
+        }, # column
+        "x25CallParmChargingInfo" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.17",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "default" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "noFacility" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "noChargingInfo" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "chargingInfo" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "noFacility",
+            "description" :
+                """The charging Information facility.  A value
+of default for a circuit means use the PLE
+default.  The value of default for the
+default PLE parameters means use noFacility.
+The value of noFacility means do not include
+a facility.""",
+            "reference" :
+                """See ISO 8208 Section 15.2.2.8""",
+        }, # column
+        "x25CallParmRpoa" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.18",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "RFC1213-MIB",
+                        "type" : "DisplayString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "108"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "108"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """The RPOA facility.  The octet string
+contains n * 4 sequences of the characters
+0-9 to specify a facility with n entries.
+The octet string containing the 3 characters
+DEF for a circuit specifies use of the PLE
+default (the entry for the PLE default may
+not contain DEF).  A zero length string
+indicates no facility requested.""",
+            "reference" :
+                """See ISO 8208, section 15.2.2.9""",
+        }, # column
+        "x25CallParmTrnstDly" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.19",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "65537"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "65537"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "65536",
+            "description" :
+                """The Transit Delay Selection and Indication
+value.  A value of 65536 indicates no
+facility requested.  A value of 65537 for a
+circuit means use the PLE default (the PLE
+default parameters entry may not use the
+value 65537).  The value 65535 may only be
+used to indicate the value in use by a
+circuit.""",
+            "reference" :
+                """See ISO 8208, Section 15.2.2.13""",
+        }, # column
+        "x25CallParmCallingExt" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.20",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "RFC1213-MIB",
+                        "type" : "DisplayString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "40"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "40"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """The Calling Extension facility.  This
+contains one of the following:
+
+A sequence of hex digits with the value to
+be put in the facility. These digits will be
+converted to binary by the agent and put in
+the facility.  These octets do not include
+the length octet.
+
+A value containing the three character DEF
+for a circuit means use the PLE default,
+(the entry for the PLE default parameters
+may not use the value DEF).
+
+A zero length string indicates no facility
+requested.""",
+            "reference" :
+                """See ISO 8208 Section 15.3.2.1""",
+        }, # column
+        "x25CallParmCalledExt" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.21",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "RFC1213-MIB",
+                        "type" : "DisplayString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "40"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "40"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """The Called Extension facility.  This
+contains one of the following:
+
+A sequence of hex digits with the value to
+be put in the facility.  These digits will be
+converted to binary by the agent and put in
+the facility.  These octets do not include
+the length octet.
+
+A value containing the three character DEF
+for a circuit means use the PLE default,
+(the entry for the PLE default parameters
+may not use the value DEF).
+
+A zero length string indicates no facility
+requested.""",
+            "reference" :
+                """See ISO 8208 Section 15.3.2.2""",
+        }, # column
+        "x25CallParmInMinThuPutCls" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.22",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "17"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "17"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "17",
+            "description" :
+                """The minimum input throughput Class.  A
+value of 16 for a circuit means use the PLE
+default (the PLE parameters entry may not
+use this value).  A value of 17 indicates no
+facility requested.""",
+            "reference" :
+                """See ISO 8208 Section 15.3.2.3""",
+        }, # column
+        "x25CallParmOutMinThuPutCls" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.23",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "17"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "17"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "17",
+            "description" :
+                """The minimum output throughput Class.  A
+value of 16 for a circuit means use the PLE
+default (the PLE parameters entry may not
+use this value).  A value of 17 indicates no
+facility requested.""",
+            "reference" :
+                """See ISO 8208 Section 15.3.2.3""",
+        }, # column
+        "x25CallParmEndTrnsDly" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.24",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "6"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "6"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """The End-to-End Transit Delay to negotiate.
+An octet string of length 2, 4, or 6
+contains the facility encoded as specified
+in ISO/IEC 8208 section 15.3.2.4.  An octet
+string of length 3 containing the three
+character DEF for a circuit means use the
+PLE default (the entry for the PLE default
+can not contain the characters DEF).  A zero
+length string indicates no facility
+requested.""",
+            "reference" :
+                """See ISO 8208 Section 15.3.2.4""",
+        }, # column
+        "x25CallParmPriority" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.25",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "6"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "6"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """The priority facility to negotiate.  The
+octet string encoded as specified in ISO/IEC
+8208 section 15.3.2.5.  A zero length string
+indicates no facility requested.  The entry
+for the PLE default parameters must be zero
+length.""",
+            "reference" :
+                """See ISO 8208 Section 15.3.2.5""",
+        }, # column
+        "x25CallParmProtection" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.26",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "RFC1213-MIB",
+                        "type" : "DisplayString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "108"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "108"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """A string contains the following:
+A hex string containing the value for the
+protection facility.  This will be converted
+from hex to the octets actually in the
+packet by the agent.  The agent will supply
+the length field and the length octet is not
+contained in this string.
+
+An string containing the 3 characters DEF
+for a circuit means use the PLE default (the
+entry for the PLE default parameters may not
+use the value DEF).
+
+A zero length string mean no facility
+requested.""",
+            "reference" :
+                """See ISO 8208 Section 15.3.2.5""",
+        }, # column
+        "x25CallParmExptData" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.27",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "default" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "noExpeditedData" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "expeditedData" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "noExpeditedData",
+            "description" :
+                """The Expedited Data facility to negotiate.
+A value of default for a circuit means use
+the PLE default value.  The entry for the
+PLE default parameters may not have the
+value default.""",
+            "reference" :
+                """See ISO 8208 Section 15.3.2.7""",
+        }, # column
+        "x25CallParmUserData" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.28",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "128"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "128"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """The call user data as placed in the packet.
+A zero length string indicates no call user
+data.  If both the circuit call parameters
+and the PLE default have call user data
+defined, the data from the circuit call
+parameters will be used.  If only the PLE
+has data defined, the PLE entry will be
+used.  If neither the circuit call
+parameters or the PLE default entry has a
+value, no call user data will be sent.""",
+            "reference" :
+                """See ISO 8208 Section 12.2.1.1.6, 12.2.1.2""",
+        }, # column
+        "x25CallParmCallingNetworkFacilities" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.29",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "108"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "108"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """The calling network facilities.  The
+facilities are encoded here exactly as
+encoded in the call packet.  These
+facilities do not include the marker
+facility code.
+
+A zero length string in the entry for the
+parameter to use when establishing a circuit
+means use the PLE default.  A zero length
+string in the entry for PLE default
+parameters indicates no default facilities.""",
+            "reference" :
+                """See ISO 8206 Section 15.1, category b""",
+        }, # column
+        "x25CallParmCalledNetworkFacilities" : {
+            "nodetype" : "column",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.9.1.30",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "108"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "108"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """The called network facilities.  The
+facilities are encoded here exactly as
+encoded in the call packet.  These
+facilities do not include the marker
+facility code.
+
+A zero length string in the entry for the
+parameter to use when establishing a circuit
+means use the PLE default.  A zero length
+string in the entry for PLE default
+parameters indicates no default facilities.""",
+            "reference" :
+                """See ISO 8206 Section 15.1, category c""",
+        }, # column
+        "x25ProtocolVersion" : {
+            "nodetype" : "node",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.10",
+        }, # node
+        "x25protocolCcittV1976" : {
+            "nodetype" : "node",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.10.1",
+        }, # node
+        "x25protocolCcittV1980" : {
+            "nodetype" : "node",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.10.2",
+        }, # node
+        "x25protocolCcittV1984" : {
+            "nodetype" : "node",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.10.3",
+        }, # node
+        "x25protocolCcittV1988" : {
+            "nodetype" : "node",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.10.4",
+        }, # node
+        "x25protocolIso8208V1987" : {
+            "nodetype" : "node",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.10.5",
+        }, # node
+        "x25protocolIso8208V1989" : {
+            "nodetype" : "node",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.10.6",
+        }, # node
+    }, # nodes
+
+    "notifications" : {
+        "x25Restart" : {
+            "nodetype" : "notification",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.0.1",
+            "status" : "current",
+            "objects" : {
+                "x25OperIndex" : {
+                    "nodetype" : "object",
+                    "module" : "RFC1382-MIB"
+                },
+            },
+            "description" :
+                """This trap means the X.25 PLE sent or
+received a restart packet.  The restart that
+brings up the link should not send a
+x25Restart trap so the interface should send
+a linkUp trap.  Sending this trap means the
+agent does not send a linkDown and linkUp
+trap.""",
+        }, # notification
+        "x25Reset" : {
+            "nodetype" : "notification",
+            "moduleName" : "RFC1382-MIB",
+            "oid" : "1.3.6.1.2.1.10.5.0.2",
+            "status" : "current",
+            "objects" : {
+                "x25CircuitIndex" : {
+                    "nodetype" : "object",
+                    "module" : "RFC1382-MIB"
+                },
+                "x25CircuitChannel" : {
+                    "nodetype" : "object",
+                    "module" : "RFC1382-MIB"
+                },
+            },
+            "description" :
+                """If the PLE sends or receives a reset, the
+agent should send an x25Reset trap.""",
+        }, # notification
+    }, # notifications
+
+}