logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/APS-MIB.dic

@@ -0,0 +1,2430 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python APS-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/APS-MIB"
+
+MIB = {
+    "moduleName" : "APS-MIB",
+
+    "APS-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF AToMMIB Working Group""",
+        "contact" : 
+            """       Jim Kuhfeld
+Postal: RedBack Networks. Inc.
+300 Holger Way
+San Jose, CA 95134-1362
+Tel: +1 408 750 5465
+Email: jkuhfeld@redback.com
+
+Jeff Johnson
+Postal: RedBack Networks. Inc.
+300 Holger Way
+San Jose, CA 95134-1362
+Tel: +1 408 750 5460
+Email: jeff@redback.com
+
+Michael Thatcher
+Postal: RedBack Networks. Inc.
+300 Holger Way
+San Jose, CA 95134-1362
+Tel: +1 408 750 5449
+Email: thatcher@redback.com""",
+        "description" :
+            """This management information module supports the configuration
+and management of SONET linear APS groups. The definitions and
+descriptions used in this MIB have been derived from
+Synchronous Optical Network (SONET) Transport Systems:
+Common Generic Criteria, GR-253-CORE Issue 3, September 2000,
+section 5.3. The MIB is also consistent with the Multiplex
+Section Protection (MSP) protocol as specified in ITU-T
+Recommendation G.783, Characteristics of synchronous digital
+hierarchy (SDH) equipment function blocks, Annex A and B.
+
+Copyright (C) The Internet Society (2003).  This version of
+this MIB module is part of RFC 3498; see the RFC itself for
+full legal notices.""",
+        "revisions" : (
+            {
+                "date" : "2003-02-28 00:00",
+                "description" :
+                    """Initial version of this MIB, published as RFC 3498.""",
+            },
+        ),
+        "identity node" : "apsMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "NOTIFICATION-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "Gauge32"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter32"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "SNMPv2-SMI", "name" : "transmission"},
+        {"module" : "SNMPv2-TC", "name" : "TEXTUAL-CONVENTION"},
+        {"module" : "SNMPv2-TC", "name" : "RowStatus"},
+        {"module" : "SNMPv2-TC", "name" : "TimeStamp"},
+        {"module" : "SNMPv2-TC", "name" : "StorageType"},
+        {"module" : "SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+        {"module" : "IF-MIB", "name" : "ifIndex"},
+        {"module" : "IF-MIB", "name" : "InterfaceIndex"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "SNMPv2-CONF", "name" : "NOTIFICATION-GROUP"},
+    ),
+
+    "typedefs" : {
+        "ApsK1K2" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "2",
+                "max" : "2"
+            },
+            ],
+            "range" : {
+                "min" : "2",
+                "max" : "2"
+            },
+            "description" :
+                """This Textual Convention describes an object that stores
+a SONET K1 and K2 byte APS protocol field.
+
+K1 is located in the first octet, K2 is located in
+the second octet. Bits are numbered from left to right.
+
+Bits 1-4 of the K1 byte indicate a request.
+
+1111  Lockout of Protection
+1110  Forced Switch
+1101  SF - High Priority
+1100  SF - Low Priority
+1011  SD - High Priority
+1010  SD - Low Priority
+1001  not used
+1000  Manual Switch
+0111  not used
+0110  Wait-to-Restore
+0101  not used
+0100  Exercise
+0011  not used
+0010  Reverse Request
+0001  Do Not Revert
+0000  No Request
+
+Bits 5-8 of the K1 byte indicate the channel associated with
+the request defined in bits 1-4.
+
+0000 is the Null channel.
+
+
+
+
+
+1-14 are working channels.
+15   is the extra traffic channel
+
+Bits 1-4 of the K2 byte indicate a channel. The channel is
+defined with the same syntax as K1 Bits 5-8.
+
+Bit 5 of the K2 byte indicates the
+architecture.
+
+0 if the architecture is 1+1
+1 if the architecture is 1:n
+
+Bits 6-8 of the K2 byte indicates the mode.
+
+000 - 011 are reserved for future use
+100  indicates the mode is unidirectional
+101  indicates the mode is bidirectional
+110  RDI-L
+111  AIS-L""",
+            "reference" :
+                """Bellcore (Telcordia Technologies) GR-253-CORE, Issue 3,
+September 2000, 5.3.5.""",
+        },
+        "ApsSwitchCommand" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "noCmd" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "clear" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "lockoutOfProtection" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "forcedSwitchWorkToProtect" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "forcedSwitchProtectToWork" : {
+                "nodetype" : "namednumber",
+                "number" : "5"
+            },
+            "manualSwitchWorkToProtect" : {
+                "nodetype" : "namednumber",
+                "number" : "6"
+            },
+            "manualSwitchProtectToWork" : {
+                "nodetype" : "namednumber",
+                "number" : "7"
+            },
+            "exercise" : {
+                "nodetype" : "namednumber",
+                "number" : "8"
+            },
+            "description" :
+                """An APS switch command allows a user to perform protection
+switch actions.
+
+If the APS switch command cannot be executed because an
+equal or higher priority request is in effect, an
+inconsistentValue error is returned.
+
+The Switch command values are:
+
+noCmd
+
+This value should be returned by a read request when no switch
+command has been written to the object in question since
+initialization. This value may not be used in a write
+operation.  If noCmd is used in a write operation a wrongValue
+error is returned.
+
+
+
+
+
+
+
+clear
+
+Clears all of the switch commands listed below for the
+specified channel.
+
+lockoutOfProtection
+
+Prevents any of the working channels from switching to the
+protection line. The specified channel should be the protection
+channel, otherwise an inconsistentValue error is returned.
+
+forcedSwitchWorkToProtect
+
+Switches the specified working channel to the protection line.
+If the protection channel is specified an inconsistentValue
+error is returned.
+
+forcedSwitchProtectToWork
+
+Switches the working channel back from the protection
+line to the working line. The specified channel should be
+the protection channel, otherwise an inconsistentValue
+error is returned.
+
+manualSwitchWorkToProtect
+
+Switches the specified working channel to the protection line.
+If the protection channel is specified an inconsistentValue
+error is returned.
+
+manualSwitchProtectToWork
+
+Switches the working channel back from the protection
+line to the working line. The specified channel should be
+the protection channel, otherwise an inconsistentValue
+error is returned.
+
+exercise
+
+Exercises the protocol for a protection switch of the specified
+channel by issuing an Exercise request for that channel and
+checking the response on the APS channel. """,
+        },
+        "ApsControlCommand" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "noCmd" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "lockoutWorkingChannel" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "clearLockoutWorkingChannel" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "description" :
+                """An APS control command applies only to LTE that support the
+1:n architecture and performs the following actions.
+
+The Control command values are:
+
+noCmd
+
+This value should be returned by a read request when no control
+command has been written to the object in question since
+initialization. This value may not be used in a write
+operation.  If noCmd is used in a write operation a wrongValue
+error is returned.
+
+lockoutWorkingChannel
+
+Prevents the specified working channel from switching to the
+protection line. If the protection line is specified an
+inconsistentValue error is returned.
+
+clearLockoutWorkingChannel
+
+Clears the lockout a working channel command for the channel
+specified. If the protection line is specified an
+inconsistentValue error is returned.""",
+        },
+    }, # typedefs
+
+    "nodes" : {
+        "apsMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49",
+            "status" : "current",
+        }, # node
+        "apsMIBObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1",
+        }, # node
+        "apsConfig" : {
+            "nodetype" : "node",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.1",
+        }, # node
+        "apsConfigGroups" : {
+            "nodetype" : "scalar",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Gauge32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The count of APS groups. This count includes all rows in
+apsConfigTable, regardless of the value of apsConfigRowStatus.""",
+        }, # scalar
+        "apsConfigTable" : {
+            "nodetype" : "table",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.1.2",
+            "status" : "current",
+            "description" :
+                """This table lists the APS groups that have been configured
+on the system.""",
+        }, # table
+        "apsConfigEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.1.2.1",
+            "create" : "true",
+            "status" : "current",
+            "implied" : "true",
+            "linkage" : [
+                "apsConfigName",
+            ],
+            "description" :
+                """A conceptual row in the apsConfigTable.""",
+        }, # row
+        "apsConfigName" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.1.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMP-FRAMEWORK-MIB",
+                        "type" : "SnmpAdminString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """A textual name for the APS group.""",
+        }, # column
+        "apsConfigRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.1.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The status of this APS group entry.
+
+An entry may not exist in the active state unless all
+objects in the entry have an appropriate value. Also,
+all associated apsChanConfigEntry rows must represent
+a set of consecutive channel numbers beginning with
+0 or 1, depending on the selected architecture.
+
+When set to notInService changes may be made to apsConfigMode,
+apsConfigRevert, apsConfigDirection, apsConfigExtraTraffic,
+apsConfigSdBerThreshold, apsConfigSfBerThreshold,
+and apsConfigWaitToRestore. Also, associated apsChanConfigTable
+objects may be added, deleted and modified.""",
+        }, # column
+        "apsConfigMode" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.1.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "onePlusOne" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "oneToN" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "onePlusOneCompatible" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "onePlusOneOptimized" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "onePlusOne",
+            "description" :
+                """The architecture of the APS group.
+
+onePlusOne
+
+The 1+1 architecture permanently bridges the working
+line to the protection line.
+
+oneToN
+
+The 1:n architecture allows one protection channel to
+protect up to n working channels. When a fault is detected
+on one of the n working channels that channel is bridged
+over the protection channel.
+
+onePlusOneCompatible
+
+
+
+
+
+
+This refers to 1 + 1 bidirectional switching compatible with
+1:n bidirectional switching as specified in ITU-T
+Recommendation G.783 (04/97) section A.3.4.1. Since this
+mode necessitates bidirectional switching, apsConfigDirection
+must be set to bidirectional whenever onePlusOneCompatible
+is set.
+
+onePlusOneOptimized
+
+This refers to 1 + 1 bidirectional switching optimized
+for a network using predominantly 1 + 1 bidirectional
+switching as specified in ITU-T Recommendation G.783 (04/97)
+section B.1. Since this mode necessitates bidirectional
+switching, apsConfigDirection must be set to bidirectional
+whenever onePlusOneOptimized is set.
+
+This object may not be modified if the associated
+apsConfigRowStatus object is equal to active(1).""",
+        }, # column
+        "apsConfigRevert" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.1.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "nonrevertive" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "revertive" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "nonrevertive",
+            "description" :
+                """The revertive mode of the APS group.
+
+nonrevertive
+
+Traffic remains on the protection line until another switch
+request is received.
+
+revertive
+
+When the condition that caused a switch to the protection
+line has been cleared the signal is switched back to the
+working line. Since switching is revertive with the 1:n
+architecture, apsConfigRevert must be set to revertive if
+apsConfigMode is set to oneToN.
+
+Switching may optionally be revertive with the 1+1 architecture.
+
+This object may not be modified if the associated
+apsConfigRowStatus object is equal to active(1). """,
+        }, # column
+        "apsConfigDirection" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.1.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "unidirectional" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "bidirectional" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "unidirectional",
+            "description" :
+                """The directional mode of the APS group.
+
+unidirectional
+
+The unidirectional mode provides protection in one direction.
+
+bidirectional
+
+The bidirectional mode provides protection in both
+directions.
+
+This object may not be modified if the associated
+apsConfigRowStatus object is equal to active(1). """,
+        }, # column
+        "apsConfigExtraTraffic" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.1.2.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "enabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "disabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "disabled",
+            "description" :
+                """This object enables or disables the transfer of extra traffic
+on the protection channel in a 1:n architecture. This object
+must be set to disabled if the architecture is 1+1. It may be
+necessary to disable this in order to interwork with other SONET
+network elements that don't support extra traffic.
+
+This object may not be modified if the associated
+apsConfigRowStatus object is equal to active(1). """,
+        }, # column
+        "apsConfigSdBerThreshold" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.1.2.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "5",
+                        "max" : "9"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "5",
+                        "max" : "9"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "5",
+            "description" :
+                """The Signal Degrade Bit Error Rate.
+
+The negated value of this number is used as the exponent of
+10 for computing the threshold value for the Bit Error Rate
+(BER). For example, a value of 5 indicates a BER threshold of
+10^-5.
+
+
+
+This object may be modified if the associated
+apsConfigRowStatus object is equal to active(1).""",
+        }, # column
+        "apsConfigSfBerThreshold" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.1.2.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "3",
+                        "max" : "5"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "3",
+                        "max" : "5"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "3",
+            "description" :
+                """The Signal Failure Bit Error Rate.
+
+The negated value of this number is used as the exponent of
+10 for computing the threshold value for the Bit Error Rate
+(BER). For example, a value of 5 indicates a BER threshold of
+10^-5.
+
+This object may be modified if the associated
+apsConfigRowStatus object is equal to active(1).""",
+        }, # column
+        "apsConfigWaitToRestore" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.1.2.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "720"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "720"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "300",
+            "units" : "seconds",
+            "description" :
+                """The Wait To Restore period in seconds.
+
+After clearing of a condition that necessitated an
+automatic switch, the wait to restore period must elapse
+before reverting. This is intended to avoid rapid switch
+oscillations.
+
+GR-253-CORE specifies a Wait To Restore range of 5 to 12
+minutes. G.783 defines a 5 to 12 minute Wait To Restore
+range in section 5.4.1.1.3, but also allows for a shorter
+WTR period in  Table 2-1,
+WaitToRestore value (MI_WTRtime: 0..(5)..12 minutes).
+
+This object may not be modified if the associated
+apsConfigRowStatus object is equal to active(1).""",
+        }, # column
+        "apsConfigCreationTime" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.1.2.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime at the time the row was
+created""",
+        }, # column
+        "apsConfigStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.1.2.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "default" : "nonVolatile",
+            "description" :
+                """The storage type for this conceptual row.
+Conceptual rows having the value 'permanent' need not
+allow write-access to any columnar objects in the row.""",
+        }, # column
+        "apsStatusTable" : {
+            "nodetype" : "table",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.2",
+            "status" : "current",
+            "description" :
+                """This table provides status information about APS groups
+that have been configured on the system.""",
+        }, # table
+        "apsStatusEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.2.1",
+            "status" : "current",
+            "linkage" : [
+                { "APS-MIB" : {
+                    "indexkind" : "augments",
+                    "relatedNode" : "apsConfigEntry",
+                }},
+            ],
+            "description" :
+                """A conceptual row in the apsStatusTable.""",
+        }, # row
+        "apsStatusK1K2Rcv" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"APS-MIB", "name" : "ApsK1K2"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The current value of the K1 and K2 bytes received on the
+protection channel.""",
+        }, # column
+        "apsStatusK1K2Trans" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"APS-MIB", "name" : "ApsK1K2"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The current value of the K1 and K2 bytes transmitted on the
+protection channel.""",
+        }, # column
+        "apsStatusCurrent" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Bits",
+                    "modeMismatch" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "channelMismatch" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "psbf" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "feplf" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "extraTraffic" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The current status of the APS group.
+
+modeMismatch
+
+Modes other than 1+1 unidirectional monitor protection line
+K2 bit 5, which indicates the architecture and K2 bits
+6-8, which indicate if the mode is unidirectional or
+bidirectional. A conflict between the current local mode
+and the received K2 mode information constitutes a
+mode mismatch.
+
+
+
+
+channelMismatch
+
+This bit indicates a  mismatch between the transmitted K1
+channel and the received K2 channel has been detected.
+
+psbf
+
+This bit indicates a Protection Switch Byte Failure (PSBF) is
+in effect. This condition occurs when either an inconsistent
+APS byte or an invalid code is detected. An inconsistent APS
+byte occurs when no three consecutive K1 bytes of the last 12
+successive frames are identical, starting with the last frame
+containing a previously consistent byte. An invalid code occurs
+when the incoming K1 byte contains an unused code or a code
+irrelevant for the specific switching operation (e.g., Reverse
+Request while no switching request is outstanding) in three
+consecutive frames. An invalid code also occurs when the
+incoming K1 byte contains an invalid channel number in three
+consecutive frames.
+
+feplf
+
+Modes other than 1+1 unidirectional monitor the K1 byte
+for Far-End Protection-Line failures. A Far-End
+Protection-Line defect is declared based on receiving
+SF on the protection line.
+
+extraTraffic
+
+This bit indicates whether extra traffic is currently being
+accepted on the protection line. """,
+        }, # column
+        "apsStatusModeMismatches" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of Mode Mismatch conditions.
+
+Discontinuities in the value of this counter can occur at
+re-initialization of the management system, and at other
+times as indicated by the value of
+apsStatusDiscontinuityTime.""",
+        }, # column
+        "apsStatusChannelMismatches" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of Channel Mismatch conditions.
+
+Discontinuities in the value of this counter can occur at
+re-initialization of the management system, and at other
+times as indicated by the value of
+apsStatusDiscontinuityTime.""",
+        }, # column
+        "apsStatusPSBFs" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.2.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of Protection Switch Byte Failure conditions.
+This condition occurs when either an inconsistent APS
+byte or an invalid code is detected. An inconsistent APS
+byte occurs when no three consecutive K1 bytes of the last
+12 successive frames are identical, starting with the last
+frame containing a previously consistent byte. An invalid
+code occurs when the incoming K1 byte contains an unused
+code or a code irrelevant for the specific switching
+operation (e.g., Reverse Request while no switching request
+is outstanding) in three consecutive frames. An invalid code
+also occurs when the incoming K1 byte contains an invalid
+channel number in three consecutive frames.
+
+Discontinuities in the value of this counter can occur at
+re-initialization of the management system, and at other
+times as indicated by the value of
+apsStatusDiscontinuityTime.""",
+        }, # column
+        "apsStatusFEPLFs" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.2.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of Far-End Protection-Line Failure conditions.
+This condition is declared based on receiving SF on
+the protection line in the K1 byte.
+
+
+
+
+
+
+Discontinuities in the value of this counter can occur at
+re-initialization of the management system, and at other
+times as indicated by the value of
+apsStatusDiscontinuityTime.""",
+        }, # column
+        "apsStatusSwitchedChannel" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.2.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Integer32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This field is set to the number of the channel that is
+currently switched to protection. The value 0 indicates no
+channel is switched to protection. The values 1-14 indicate
+that working channel is switched to protection.""",
+        }, # column
+        "apsStatusDiscontinuityTime" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.2.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime on the most recent occasion at which
+any one or more of this APS group's counters suffered a
+discontinuity.  The relevant counters are the specific
+instances associated with this APS group of any Counter32
+object contained in apsStatusTable. If no such
+discontinuities have occurred since the last re-initialization
+of the local management subsystem, then this object contains
+a zero value.""",
+        }, # column
+        "apsMap" : {
+            "nodetype" : "node",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.3",
+        }, # node
+        "apsChanLTEs" : {
+            "nodetype" : "scalar",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.3.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Gauge32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The count of SONET LTE interfaces on the system.
+Each interface that is included has an ifType value of
+sonet(39).""",
+        }, # scalar
+        "apsMapTable" : {
+            "nodetype" : "table",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.3.2",
+            "status" : "current",
+            "description" :
+                """This table lists the SONET LTE interfaces on the system.
+Each interface that is listed has an ifType value of
+sonet(39).""",
+        }, # table
+        "apsMapEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.3.2.1",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+            ],
+            "description" :
+                """A conceptual row in the apsMapTable.""",
+        }, # row
+        "apsMapGroupName" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.3.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMP-FRAMEWORK-MIB",
+                        "type" : "SnmpAdminString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "32"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "32"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """A textual name for the APS group which this channel is
+included in. If the channel is not part of an APS group
+this value is set to a string of size 0.
+
+When an instance of apsChanConfigIfIndex is set equal to an
+instance of ifIndex that has an ifType value of sonet(39),
+apsMapGroupName is set equal to the corresponding value of
+apsChanConfigGroupName.
+
+If an instance of ifIndex that has an ifType value of
+sonet(39) ceases to be equal to an instance of
+apsChanConfigIfIndex, either because of a change in the value
+of apsChanConfigIfIndex, or because of row deletion in the
+ApsChanConfigTable, apsMapGroupName is set to a string of
+size 0.""",
+        }, # column
+        "apsMapChanNumber" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.3.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-1",
+                        "max" : "14"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-1",
+                        "max" : "14"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This field is set to a unique channel number within an APS
+group.  The value 0 indicates the null channel. The values
+1-14 define a working channel. If the SONET LTE is not part
+of an APS group this value is set to -1.
+
+When an instance of apsChanConfigIfIndex is set equal to an
+instance of ifIndex that has an  ifType value of sonet(39),
+apsMapChanNumber is set equal to the corresponding value of
+apsChanConfigNumber.
+
+If an instance of ifIndex that has an  ifType value of
+sonet(39) ceases to be equal to an instance of
+apsChanConfigIfIndex, either because of a change in the
+value of apsChanConfigIfIndex, or because of row deletion
+in the ApsChanConfigTable, apsMapChanNumber is set to -1.""",
+        }, # column
+        "apsChanConfigTable" : {
+            "nodetype" : "table",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.4",
+            "status" : "current",
+            "description" :
+                """This table lists the APS channels that have been configured
+in APS groups.""",
+        }, # table
+        "apsChanConfigEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.4.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "apsChanConfigGroupName",
+                "apsChanConfigNumber",
+            ],
+            "description" :
+                """A conceptual row in the apsChanConfigTable.""",
+        }, # row
+        "apsChanConfigGroupName" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.4.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMP-FRAMEWORK-MIB",
+                        "type" : "SnmpAdminString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "32"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """A textual name for the APS group which this channel is
+included in.""",
+        }, # column
+        "apsChanConfigNumber" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.4.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "14"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "14"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """This field is set to a unique channel number within an APS
+group.  The value 0 indicates the null channel.  The values
+1-14 define a working channel.
+
+This field must be assigned a unique number within the group.""",
+        }, # column
+        "apsChanConfigRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.4.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The status of this APS channel entry.
+
+An entry may not exist in the active state unless all
+objects in the entry have an appropriate value.
+
+A row in the apsChanConfigTable may not be created,
+deleted, set to notInService or otherwise modified
+if the apsChanConfigGroupName value is equal to an
+apsConfigName value and the associated apsConfigRowStatus
+object is equal to active. However, if the apsConfigRowStatus
+object is equal to notInService, a row may be created, deleted
+or modified. In other words, a channel may not be added,
+deleted or modified if the group is active.
+
+
+
+A row may be created with an apsChanConfigGroupName value
+that is not equal to any existing instance of apsConfigName.
+This action is the initial step in adding a SONET LTE to a
+new APS group.
+
+If this object is set to destroy, the associated instance
+of apsMapGroupName will be set to a string of size 0 and
+the apsMapChanNumber will be set to -1. The channel status
+entry will also be deleted by this action.
+
+apsChanConfigNumber must be set to a unique channel number
+within the APS group. The value 0 indicates the null channel.
+The values 1-14 define a working channel. When an attempt is
+made to set the  corresponding apsConfigRowStatus field to
+active the apsChanConfigNumber values of all entries with equal
+apsChanConfigGroupName fields must represent a set of
+consecutive integer values beginning with 0 or 1, depending on
+the architecture of the group, and ending with n, where n is
+greater than or equal to 1 and less than or equal to 14.
+Otherwise, the error inconsistentValue is returned to the
+apsConfigRowStatus set attempt.""",
+        }, # column
+        "apsChanConfigIfIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.4.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "InterfaceIndex"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The Interface Index assigned to a SONET LTE. This is an
+interface with ifType sonet(39). The value of this object
+must be unique among all instances of apsChanConfigIfIndex.
+In other words, a particular SONET LTE can only be configured
+in one APS group.
+
+This object cannot be set if the apsChanConfigGroupName
+instance associated with this row is equal to an instance of
+apsConfigName and the corresponding apsConfigRowStatus object
+is set to active.  In other words this value cannot be changed
+if the APS group is active. However, this value may be changed
+if the apsConfigRowStatus value is equal to notInService.""",
+        }, # column
+        "apsChanConfigPriority" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.4.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "low" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "high" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "low",
+            "description" :
+                """The priority of the channel.
+
+
+
+This field determines whether high or low priority
+SD and SF codes are used in K1 requests.
+
+This field is only applicable if the channel is to be included
+in a group using the 1:n architecture. It is not applicable if
+the channel is to be included in a group using the 1+1
+architecture, and is ignored in that case.
+
+This object cannot be set if the apsChanConfigGroupName
+instance associated with this row is equal to an instance of
+apsConfigName and the corresponding apsConfigRowStatus object
+is set to active.  In other words this value cannot be changed
+if the APS group is active.  However, this value may be changed
+if the apsConfigRowStatus value is equal to notInService.""",
+        }, # column
+        "apsChanConfigStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.4.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "default" : "nonVolatile",
+            "description" :
+                """The storage type for this conceptual row.
+Conceptual rows having the value 'permanent' need not
+allow write-access to any columnar objects in the row.""",
+        }, # column
+        "apsCommandTable" : {
+            "nodetype" : "table",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.5",
+            "status" : "current",
+            "description" :
+                """This table allows commands to be sent to configured APS
+groups.""",
+        }, # table
+        "apsCommandEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.5.1",
+            "status" : "current",
+            "linkage" : [
+                "apsChanConfigGroupName",
+                "apsChanConfigNumber",
+            ],
+            "description" :
+                """A conceptual row in the apsCommandTable. This row exists only
+if the associated apsConfigEntry is active.""",
+        }, # row
+        "apsCommandSwitch" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.5.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"APS-MIB", "name" : "ApsSwitchCommand"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Allows the initiation of an APS switch command on the
+APS group and channel specified by the index values.
+
+When read this object returns the last command written
+or noCmd if no command has been written to this
+channel since initialization. The return of the last command
+written does not imply that this command is currently in
+effect.  This request may have been preempted by a higher
+priority local or remote request. In order to determine the
+current state of the APS group it is necessary to read
+the objects apsStatusK1K2Rcv and apsStatusK1K2Trans.
+
+The value lockoutOfProtection should only be applied to the
+protection line channel since that switch command prevents any
+of the working channels from switching to the protection line.
+Following the same logic, forcedSwitchProtectToWork and
+manualSwitchProtectToWork should only be applied to the
+protection line channel.
+
+forcedSwitchWorkToProtect and manualSwitchWorkToProtect
+should only be applied to a working channel.""",
+        }, # column
+        "apsCommandControl" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.5.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"APS-MIB", "name" : "ApsControlCommand"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Allows the initiation of an APS control command on the
+APS group and channel specified by the index values.
+
+
+
+
+
+
+When read this object returns the last command written or
+noCmd if no command has been written to this channel since
+initialization.
+
+This object does not apply to the protection line.""",
+        }, # column
+        "apsChanStatusTable" : {
+            "nodetype" : "table",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.6",
+            "status" : "current",
+            "description" :
+                """This table contains status information for all SONET LTE
+interfaces that are included in APS groups.""",
+        }, # table
+        "apsChanStatusEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.6.1",
+            "status" : "current",
+            "linkage" : [
+                { "APS-MIB" : {
+                    "indexkind" : "augments",
+                    "relatedNode" : "apsChanConfigEntry",
+                }},
+            ],
+            "description" :
+                """A conceptual row in the apsChanStatusTable.""",
+        }, # row
+        "apsChanStatusCurrent" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.6.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Bits",
+                    "lockedOut" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "sd" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "sf" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "switched" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "wtr" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Indicates the current state of the port.
+
+lockedOut
+
+This bit, when applied to a working channel, indicates that
+the channel is prevented from switching to the protection
+line.  When applied to the null channel, this bit indicates
+that no working channel may switch to the protection line.
+
+sd
+
+A signal degrade condition is in effect.
+
+sf
+
+A signal failure condition is in effect.
+
+switched
+
+The switched bit is applied to a working channel if that
+channel is currently switched to the protection line.
+
+wtr
+
+A Wait-to-Restore state is in effect.""",
+        }, # column
+        "apsChanStatusSignalDegrades" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.6.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of Signal Degrade conditions. This condition
+occurs when the line Bit Error Rate exceeds the currently
+configured value of the relevant instance of
+apsConfigSdBerThreshold.
+
+Discontinuities in the value of this counter can occur at
+re-initialization of the management system, and at other
+times as indicated by the value of
+apsChanStatusDiscontinuityTime.""",
+        }, # column
+        "apsChanStatusSignalFailures" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.6.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of Signal Failure conditions that have been
+detected on the incoming signal. This condition occurs
+when a loss of signal, loss of frame, AIS-L or a Line
+bit error rate exceeding the currently configured value of
+the relevant instance of apsConfigSfBerThreshold.
+
+Discontinuities in the value of this counter can occur at
+re-initialization of the management system, and at other
+times as indicated by the value of
+apsChanStatusDiscontinuityTime.""",
+        }, # column
+        "apsChanStatusSwitchovers" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.6.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """When queried with index value apsChanConfigNumber other than
+0, this object will return the number of times this channel
+has switched to the protection line.
+
+When queried with index value apsChanConfigNumber set to 0,
+which is the protection line, this object will return the
+number of times that any working channel has been switched
+back to the working line from this protection line.
+
+Discontinuities in the value of this counter can occur at
+re-initialization of the management system, and at other
+times as indicated by the value of
+apsChanStatusDiscontinuityTime.""",
+        }, # column
+        "apsChanStatusLastSwitchover" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.6.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """When queried with index value apsChanConfigNumber other than
+0, this object will return the value of sysUpTime when this
+channel last completed a switch to the protection line. If
+
+
+
+
+this channel has never switched to the protection line, the
+value 0 will be returned.
+
+When queried with index value apsChanConfigNumber set to 0,
+which is the protection line, this object will return the
+value of sysUpTime the last time that a working channel was
+switched back to the working line from this protection line.
+If no working channel has ever switched back to the working
+line from this protection line, the value 0 will be returned.""",
+        }, # column
+        "apsChanStatusSwitchoverSeconds" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.6.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The cumulative Protection Switching Duration (PSD) time in
+seconds. For a working channel, this is the cumulative number
+of seconds that service was carried on the protection line.
+For the protection line, this is the cumulative number of
+seconds that the protection line has been used to carry any
+working channel traffic. This information is only valid if
+revertive switching is enabled. The value 0 will be returned
+otherwise.
+
+Discontinuities in the value of this counter can occur at
+re-initialization of the management system, and at other
+times as indicated by the value of
+apsChanStatusDiscontinuityTime. For example, if the value
+of an instance of apsChanStatusSwitchoverSeconds changes
+from a non-zero value to zero due to revertive switching
+being disabled, it is expected that the corresponding
+value of apsChanStatusDiscontinuityTime will be updated
+to reflect the time of the configuration change.""",
+        }, # column
+        "apsChanStatusDiscontinuityTime" : {
+            "nodetype" : "column",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.6.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime on the most recent occasion at which
+any one or more of this channel's counters suffered a
+discontinuity.  The relevant counters are the specific
+instances associated with this channel of any Counter32
+object contained in apsChanStatusTable. If no such
+
+
+
+discontinuities have occurred since the last re-initialization
+of the local management subsystem, then this object contains
+a zero value.""",
+        }, # column
+        "apsNotificationEnable" : {
+            "nodetype" : "scalar",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Bits",
+                    "switchover" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "modeMismatch" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "channelMismatch" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "psbf" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "feplf" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "()",
+            "description" :
+                """Provides the ability to enable and disable notifications
+defined in this MIB.
+
+switchover
+
+Indicates  apsEventSwitchover notifications
+should be generated.
+
+modeMismatch
+
+Indicates  apsEventModeMismatch notifications
+should be generated.
+
+channelMismatch
+
+Indicates  apsEventChannelMismatch notifications
+should be generated.
+
+psbf
+
+Indicates  apsEventPSBF notifications
+should be generated.
+
+feplf
+
+Indicates  apsEventFEPLF notifications
+should be generated. """,
+        }, # scalar
+        "apsMIBNotifications" : {
+            "nodetype" : "node",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.2",
+        }, # node
+        "apsNotificationsPrefix" : {
+            "nodetype" : "node",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.2.0",
+        }, # node
+        "apsMIBConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.3",
+        }, # node
+        "apsGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.3.1",
+        }, # node
+        "apsCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.3.2",
+        }, # node
+    }, # nodes
+
+    "notifications" : {
+        "apsEventSwitchover" : {
+            "nodetype" : "notification",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.2.0.1",
+            "status" : "current",
+            "objects" : {
+                "apsChanStatusSwitchovers" : {
+                    "nodetype" : "object",
+                    "module" : "APS-MIB"
+                },
+                "apsChanStatusCurrent" : {
+                    "nodetype" : "object",
+                    "module" : "APS-MIB"
+                },
+            },
+            "description" :
+                """An apsEventSwitchover notification is sent when the
+value of an instance of apsChanStatusSwitchovers increments.""",
+        }, # notification
+        "apsEventModeMismatch" : {
+            "nodetype" : "notification",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.2.0.2",
+            "status" : "current",
+            "objects" : {
+                "apsStatusModeMismatches" : {
+                    "nodetype" : "object",
+                    "module" : "APS-MIB"
+                },
+                "apsStatusCurrent" : {
+                    "nodetype" : "object",
+                    "module" : "APS-MIB"
+                },
+            },
+            "description" :
+                """An apsEventModeMismatch notification is sent when the
+value of an instance of apsStatusModeMismatches increments.""",
+        }, # notification
+        "apsEventChannelMismatch" : {
+            "nodetype" : "notification",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.2.0.3",
+            "status" : "current",
+            "objects" : {
+                "apsStatusChannelMismatches" : {
+                    "nodetype" : "object",
+                    "module" : "APS-MIB"
+                },
+                "apsStatusCurrent" : {
+                    "nodetype" : "object",
+                    "module" : "APS-MIB"
+                },
+            },
+            "description" :
+                """An apsEventChannelMismatch notification is sent when the
+value of an instance of apsStatusChannelMismatches increments.""",
+        }, # notification
+        "apsEventPSBF" : {
+            "nodetype" : "notification",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.2.0.4",
+            "status" : "current",
+            "objects" : {
+                "apsStatusPSBFs" : {
+                    "nodetype" : "object",
+                    "module" : "APS-MIB"
+                },
+                "apsStatusCurrent" : {
+                    "nodetype" : "object",
+                    "module" : "APS-MIB"
+                },
+            },
+            "description" :
+                """An apsEventPSBF notification is sent when the
+value of an instance of apsStatusPSBFs increments.""",
+        }, # notification
+        "apsEventFEPLF" : {
+            "nodetype" : "notification",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.2.0.5",
+            "status" : "current",
+            "objects" : {
+                "apsStatusFEPLFs" : {
+                    "nodetype" : "object",
+                    "module" : "APS-MIB"
+                },
+                "apsStatusCurrent" : {
+                    "nodetype" : "object",
+                    "module" : "APS-MIB"
+                },
+            },
+            "description" :
+                """An apsEventFEPLFs notification is sent when the
+value of an instance of apsStatusFEPLFs increments.""",
+        }, # notification
+    }, # notifications
+
+    "groups" : {
+        "apsConfigGeneral" : {
+            "nodetype" : "group",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.3.1.1",
+            "status" : "current",
+            "members" : {
+                "apsConfigMode" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsConfigRevert" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsConfigDirection" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsConfigExtraTraffic" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsConfigSdBerThreshold" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsConfigSfBerThreshold" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsConfigCreationTime" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsConfigRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsConfigStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsNotificationEnable" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of apsConfigTable objects providing configuration
+information applicable to all linear APS groups.""",
+        }, # group
+        "apsConfigWtr" : {
+            "nodetype" : "group",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.3.1.2",
+            "status" : "current",
+            "members" : {
+                "apsConfigWaitToRestore" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+            }, # members
+            "description" :
+                """The apsConfigTable object that provides information which is
+applicable to groups supporting a configurable WTR period.""",
+        }, # group
+        "apsCommandOnePlusOne" : {
+            "nodetype" : "group",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.3.1.3",
+            "status" : "current",
+            "members" : {
+                "apsCommandSwitch" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+            }, # members
+            "description" :
+                """The  apsCommandTable object which is applicable to groups
+implementing the linear APS 1+1 architecture. Also, set
+operations must be supported.""",
+        }, # group
+        "apsCommandOneToN" : {
+            "nodetype" : "group",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.3.1.4",
+            "status" : "current",
+            "members" : {
+                "apsCommandSwitch" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsCommandControl" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of apsCommandTable objects which are applicable to
+groups implementing the linear APS 1:n architecture. Also, set
+operations must be supported.""",
+        }, # group
+        "apsStatusGeneral" : {
+            "nodetype" : "group",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.3.1.5",
+            "status" : "current",
+            "members" : {
+                "apsStatusK1K2Rcv" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsStatusK1K2Trans" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsStatusCurrent" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsStatusModeMismatches" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsStatusChannelMismatches" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsStatusPSBFs" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsStatusFEPLFs" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsStatusSwitchedChannel" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsStatusDiscontinuityTime" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of apsStatusTable objects providing status
+information applicable to all linear APS groups.""",
+        }, # group
+        "apsChanGeneral" : {
+            "nodetype" : "group",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.3.1.6",
+            "status" : "current",
+            "members" : {
+                "apsChanConfigIfIndex" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsChanConfigRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsChanConfigStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsChanStatusCurrent" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsChanStatusSignalDegrades" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsChanStatusSignalFailures" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsChanStatusSwitchovers" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsChanStatusLastSwitchover" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsChanStatusSwitchoverSeconds" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsChanStatusDiscontinuityTime" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of channel objects providing information
+applicable to all linear APS channels.""",
+        }, # group
+        "apsChanOneToN" : {
+            "nodetype" : "group",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.3.1.7",
+            "status" : "current",
+            "members" : {
+                "apsChanConfigPriority" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+            }, # members
+            "description" :
+                """The apsChanConfigTable object that provides information which
+is only applicable to groups implementing the linear APS 1:n
+architecture.""",
+        }, # group
+        "apsTotalsGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.3.1.8",
+            "status" : "current",
+            "members" : {
+                "apsConfigGroups" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsChanLTEs" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of objects providing optional counts of configured
+APS groups and SONET LTE interfaces.""",
+        }, # group
+        "apsMapGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.3.1.9",
+            "status" : "current",
+            "members" : {
+                "apsMapGroupName" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsMapChanNumber" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of apsMapTable objects providing a mapping
+from sonet(39) InterfaceIndex to group name and channel
+number for assigned APS channels and a list of unassigned
+sonet(39) interfaces.""",
+        }, # group
+        "apsEventGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.3.1.10",
+            "status" : "current",
+            "members" : {
+                "apsEventSwitchover" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsEventModeMismatch" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsEventChannelMismatch" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsEventPSBF" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+                "apsEventFEPLF" : {
+                    "nodetype" : "member",
+                    "module" : "APS-MIB"
+                },
+            }, # members
+            "description" :
+                """A collection of SONET linear APS notifications.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "apsFullCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.3.2.1",
+            "status" : "current",
+            "description" :
+                """When this MIB is implemented with support for read-create, then
+such an implementation can claim read/write compliance. Linear
+APS groups can then be both monitored and configured with this
+MIB.
+
+Note that An agent is not required to process SNMP Set Requests
+that affect multiple control objects within this MIB. This is
+intended to simplify the processing of Set Requests for the
+various control tables by eliminating the possibility that a
+single Set PDU will contain multiple varbinds which are in
+conflict. """,
+            "requires" : {
+                "apsConfigGeneral" : {
+                    "nodetype" : "mandatory",
+                    "module" : "APS-MIB"
+                },
+                "apsStatusGeneral" : {
+                    "nodetype" : "mandatory",
+                    "module" : "APS-MIB"
+                },
+                "apsChanGeneral" : {
+                    "nodetype" : "mandatory",
+                    "module" : "APS-MIB"
+                },
+                "apsConfigWtr" : {
+                    "nodetype" : "optional",
+                    "module" : "APS-MIB",
+                    "description" :
+                        """Implementation of this group is optional for all
+linear APS implementations. The information is
+applicable to groups supporting a configurable
+WTR period.""",
+                },
+                "apsCommandOnePlusOne" : {
+                    "nodetype" : "optional",
+                    "module" : "APS-MIB",
+                    "description" :
+                        """Implementation of this group is optional for all
+linear APS implementations. The information is
+applicable to groups implementing the linear
+
+
+
+APS 1+1 architecture and supporting set operations.""",
+                },
+                "apsCommandOneToN" : {
+                    "nodetype" : "optional",
+                    "module" : "APS-MIB",
+                    "description" :
+                        """Implementation of this group is optional for all
+linear APS implementations. The information is
+applicable to groups implementing the linear
+APS 1:n architecture and supporting set operations.""",
+                },
+                "apsChanOneToN" : {
+                    "nodetype" : "optional",
+                    "module" : "APS-MIB",
+                    "description" :
+                        """Implementation of this group is optional for all
+linear APS implementations. The information is
+applicable to groups implementing the linear
+APS 1:n architecture.""",
+                },
+                "apsTotalsGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "APS-MIB",
+                    "description" :
+                        """Implementation of this group is optional for all
+linear APS implementations.""",
+                },
+                "apsMapGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "APS-MIB",
+                    "description" :
+                        """Implementation of this group is optional for all
+linear APS implementations.""",
+                },
+                "apsEventGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "APS-MIB",
+                    "description" :
+                        """Implementation of this group is optional for all
+linear APS implementations.""",
+                },
+            }, # requires
+            "refinements" : {
+                "apsConfigRowStatus" : {
+                    "module" : "APS-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "writesyntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "createAndGo" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                            "destroy" : {
+                                "nodetype" : "namednumber",
+                                "number" : "6"
+                            },
+                        },
+                    }, # writesyntax
+                    "description" :
+                        """Support for createAndWait and notInService is not
+required.""",
+                },
+                "apsChanConfigRowStatus" : {
+                    "module" : "APS-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "writesyntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "createAndGo" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                            "destroy" : {
+                                "nodetype" : "namednumber",
+                                "number" : "6"
+                            },
+                        },
+                    }, # writesyntax
+                    "description" :
+                        """Support for createAndWait and notInService is not
+required.""",
+                },
+            }, # refinements
+
+        }, # compliance
+        "apsReadOnlyCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "APS-MIB",
+            "oid" : "1.3.6.1.2.1.10.49.3.2.2",
+            "status" : "current",
+            "description" :
+                """When this MIB is implemented without support for read-create
+(i.e. in read-only mode), then that implementation can claim
+read-only compliance. In that case, linear APS groups can be
+monitored but cannot be configured with this MIB.""",
+            "requires" : {
+                "apsConfigGeneral" : {
+                    "nodetype" : "mandatory",
+                    "module" : "APS-MIB"
+                },
+                "apsStatusGeneral" : {
+                    "nodetype" : "mandatory",
+                    "module" : "APS-MIB"
+                },
+                "apsChanGeneral" : {
+                    "nodetype" : "mandatory",
+                    "module" : "APS-MIB"
+                },
+                "apsConfigWtr" : {
+                    "nodetype" : "optional",
+                    "module" : "APS-MIB",
+                    "description" :
+                        """Implementation of this group is optional for all
+linear APS implementations. The information is
+applicable to groups supporting a configurable
+WTR period.""",
+                },
+                "apsCommandOnePlusOne" : {
+                    "nodetype" : "optional",
+                    "module" : "APS-MIB",
+                    "description" :
+                        """Implementation of this group is optional for all
+linear APS implementations. The information is
+applicable to groups implementing the linear
+APS 1+1 architecture and supporting set operations.""",
+                },
+                "apsCommandOneToN" : {
+                    "nodetype" : "optional",
+                    "module" : "APS-MIB",
+                    "description" :
+                        """Implementation of this group is optional for all
+linear APS implementations. The information is
+applicable to groups implementing the linear
+APS 1:n architecture and supporting set operations.""",
+                },
+                "apsChanOneToN" : {
+                    "nodetype" : "optional",
+                    "module" : "APS-MIB",
+                    "description" :
+                        """Implementation of this group is optional for all
+linear APS implementations. The information is
+applicable to groups implementing the linear
+APS 1:n architecture.""",
+                },
+                "apsTotalsGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "APS-MIB",
+                    "description" :
+                        """Implementation of this group is optional for all
+linear APS implementations.""",
+                },
+                "apsMapGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "APS-MIB",
+                    "description" :
+                        """Implementation of this group is optional for all
+linear APS implementations.""",
+                },
+                "apsEventGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "APS-MIB",
+                    "description" :
+                        """Implementation of this group is optional for all
+linear APS implementations.""",
+                },
+            }, # requires
+            "refinements" : {
+                "apsConfigMode" : {
+                    "module" : "APS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "apsConfigRevert" : {
+                    "module" : "APS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "apsConfigDirection" : {
+                    "module" : "APS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "apsConfigExtraTraffic" : {
+                    "module" : "APS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "apsConfigSdBerThreshold" : {
+                    "module" : "APS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "apsConfigSfBerThreshold" : {
+                    "module" : "APS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "apsConfigWaitToRestore" : {
+                    "module" : "APS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "apsConfigRowStatus" : {
+                    "module" : "APS-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required, and active is the only status
+that needs to be supported.""",
+                },
+                "apsConfigStorageType" : {
+                    "module" : "APS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "apsChanConfigIfIndex" : {
+                    "module" : "APS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "apsChanConfigPriority" : {
+                    "module" : "APS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "apsChanConfigRowStatus" : {
+                    "module" : "APS-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required, and active is the only status
+that needs to be supported.""",
+                },
+                "apsChanConfigStorageType" : {
+                    "module" : "APS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "apsNotificationEnable" : {
+                    "module" : "APS-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+            }, # refinements
+
+        }, # compliance
+    }, # compliances
+
+}