logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/POWER-ETHERNET-MIB.dic

@@ -0,0 +1,959 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python POWER-ETHERNET-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/POWER-ETHERNET-MIB"
+
+MIB = {
+    "moduleName" : "POWER-ETHERNET-MIB",
+
+    "POWER-ETHERNET-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF Ethernet Interfaces and Hub MIB
+Working Group""",
+        "contact" : 
+            """
+WG Charter:
+http://www.ietf.org/html.charters/hubmib-charter.html
+
+Mailing lists:
+General Discussion: hubmib@ietf.org
+To Subscribe: hubmib-requests@ietf.org
+In Body: subscribe your_email_address
+
+Chair: Dan Romascanu
+Avaya
+Tel:  +972-3-645-8414
+Email: dromasca@avaya.com
+
+Editor: Avi Berger
+PowerDsine Inc.
+Tel:    972-9-7755100 Ext 307
+Fax:    972-9-7755120
+E-mail: avib@PowerDsine.com""",
+        "description" :
+            """The MIB module for managing Power Source Equipment
+(PSE) working according to the IEEE 802.af Powered
+Ethernet (DTE Power via MDI) standard.
+
+ The following terms are used throughout this
+ MIB module.  For complete formal definitions,
+ the IEEE 802.3 standards should be consulted
+ wherever possible:
+
+ Group - A recommended, but optional, entity
+ defined by the IEEE 802.3 management standard,
+ in order to support a modular numbering scheme.
+ The classical example allows an implementor to
+ represent field-replaceable units as groups of
+ ports, with the port numbering matching the
+ modular hardware implementation.
+
+Port - This entity identifies the port within the group
+for which this entry contains information.  The numbering
+scheme for ports is implementation specific.
+
+Copyright (c) The Internet Society (2003).  This version
+of this MIB module is part of RFC 3621; See the RFC
+itself for full legal notices.""",
+        "revisions" : (
+            {
+                "date" : "2003-11-24 00:00",
+                "description" :
+                    """Initial version, published as RFC 3621.""",
+            },
+        ),
+        "identity node" : "powerEthernetMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "mib-2"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "SNMPv2-SMI", "name" : "Gauge32"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter32"},
+        {"module" : "SNMPv2-SMI", "name" : "NOTIFICATION-TYPE"},
+        {"module" : "SNMPv2-TC", "name" : "TruthValue"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "SNMPv2-CONF", "name" : "NOTIFICATION-GROUP"},
+        {"module" : "SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+    ),
+
+    "nodes" : {
+        "powerEthernetMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105",
+            "status" : "current",
+        }, # node
+        "pethNotifications" : {
+            "nodetype" : "node",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.0",
+        }, # node
+        "pethObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1",
+        }, # node
+        "pethPsePortTable" : {
+            "nodetype" : "table",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.1",
+            "status" : "current",
+            "description" :
+                """A table of objects that display and control the power
+characteristics of power Ethernet ports on a Power Source
+Entity (PSE) device.  This group will be implemented in
+managed power Ethernet switches and mid-span devices.
+Values of all read-write objects in this table are
+persistent at restart/reboot.""",
+        }, # table
+        "pethPsePortEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.1.1",
+            "status" : "current",
+            "linkage" : [
+                "pethPsePortGroupIndex",
+                "pethPsePortIndex",
+            ],
+            "description" :
+                """A set of objects that display and control the power
+characteristics of a power Ethernet PSE port.""",
+        }, # row
+        "pethPsePortGroupIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """This variable uniquely identifies the group
+containing the port to which a power Ethernet PSE is
+connected.  Group means box in the stack, module in a
+rack and the value 1 MUST be used for non-modular devices.
+Furthermore, the same value MUST be used in this variable,
+pethMainPseGroupIndex, and pethNotificationControlGroupIndex
+to refer to a given box in a stack or module in the rack.""",
+        }, # column
+        "pethPsePortIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """This variable uniquely identifies the power Ethernet PSE
+port within group pethPsePortGroupIndex to which the
+power Ethernet PSE entry is connected.""",
+        }, # column
+        "pethPsePortAdminEnable" : {
+            "nodetype" : "column",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """true (1) An interface which can provide the PSE functions.
+false(2) The interface will act as it would if it had no PSE
+function.""",
+            "reference" :
+                """IEEE Std 802.3af Section 30.9.1.1.2 aPSEAdminState""",
+        }, # column
+        "pethPsePortPowerPairsControlAbility" : {
+            "nodetype" : "column",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Describes the capability of controlling the power pairs
+functionality to switch pins for sourcing power.
+The value true indicate that the device has the capability
+to control the power pairs.  When false the PSE Pinout
+Alternative used cannot be controlled through the
+PethPsePortAdminEnable attribute.""",
+            "reference" :
+                """IEEE Std 802.3af Section 30.9.1.1.3
+aPSEPowerPairsControlAbility""",
+        }, # column
+        "pethPsePortPowerPairs" : {
+            "nodetype" : "column",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "signal" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "spare" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """Describes or controls the pairs in use.  If the value of
+pethPsePortPowerPairsControl is true, this object is
+writable.
+A value of signal(1) means that the signal pairs
+only are in use.
+A value of spare(2) means that the spare pairs
+only are in use.""",
+            "reference" :
+                """IEEE Std 802.3af Section 30.9.1.1.4 aPSEPowerPairs""",
+        }, # column
+        "pethPsePortDetectionStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "disabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "searching" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "deliveringPower" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "fault" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "test" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "otherFault" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Describes the operational status of the port PD detection.
+A value of disabled(1)- indicates that the PSE State diagram
+is in the state DISABLED.
+A value of deliveringPower(3) - indicates that the PSE State
+diagram is in the state POWER_ON for a duration greater than
+tlim max (see IEEE Std 802.3af Table 33-5 tlim).
+A value of fault(4) - indicates that the PSE State diagram is
+in the state TEST_ERROR.
+A value of test(5) - indicates that the PSE State diagram is
+in the state TEST_MODE.
+A value of otherFault(6) - indicates that the PSE State
+diagram is in the state IDLE due to the variable
+error_conditions.
+A value of searching(2)- indicates the PSE State diagram is
+in a state other than those listed above.""",
+            "reference" :
+                """IEEE Std 802.3af Section 30.9.1.1.5
+aPSEPowerDetectionStatus""",
+        }, # column
+        "pethPsePortPowerPriority" : {
+            "nodetype" : "column",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "critical" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "high" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "low" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object controls the priority of the port from the point
+of view of a power management algorithm.  The priority that
+is set by this variable could be used by a control mechanism
+that prevents over current situations by disconnecting first
+ports with lower power priority.  Ports that connect devices
+critical to the operation of the network - like the E911
+telephones ports - should be set to higher priority.""",
+        }, # column
+        "pethPsePortMPSAbsentCounter" : {
+            "nodetype" : "column",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented when the PSE state diagram
+transitions directly from the state POWER_ON to the
+
+
+
+state IDLE due to tmpdo_timer_done being asserted.""",
+            "reference" :
+                """IEEE Std 802.3af Section 30.9.1.1.11
+aPSEMPSAbsentCounter""",
+        }, # column
+        "pethPsePortType" : {
+            "nodetype" : "column",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.1.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """A manager will set the value of this variable to indicate
+the type of powered device that is connected to the port.
+The default value supplied by the agent if no value has
+ever been set should be a zero-length octet string.""",
+        }, # column
+        "pethPsePortPowerClassifications" : {
+            "nodetype" : "column",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.1.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "class0" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "class1" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "class2" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "class3" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "class4" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Classification is a way to tag different terminals on the
+Power over LAN network according to their power consumption.
+Devices such as IP telephones, WLAN access points and others,
+will be classified according to their power requirements.
+
+The meaning of the classification labels is defined in the
+IEEE specification.
+
+This variable is valid only while a PD is being powered,
+that is, while the attribute pethPsePortDetectionStatus
+is reporting the enumeration deliveringPower.""",
+            "reference" :
+                """IEEE Std 802.3af Section 30.9.1.1.6
+aPSEPowerClassification""",
+        }, # column
+        "pethPsePortInvalidSignatureCounter" : {
+            "nodetype" : "column",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.1.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented when the PSE state diagram
+enters the state SIGNATURE_INVALID.""",
+            "reference" :
+                """IEEE Std 802.3af Section 30.9.1.1.7
+aPSEInvalidSignatureCounter""",
+        }, # column
+        "pethPsePortPowerDeniedCounter" : {
+            "nodetype" : "column",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.1.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented when the PSE state diagram
+enters the state POWER_DENIED.""",
+            "reference" :
+                """IEEE Std 802.3af Section 30.9.1.1.8
+aPSEPowerDeniedCounter""",
+        }, # column
+        "pethPsePortOverLoadCounter" : {
+            "nodetype" : "column",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.1.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented when the PSE state diagram
+enters the state ERROR_DELAY_OVER.""",
+            "reference" :
+                """IEEE Std 802.3af Section 30.9.1.1.9
+aPSEOverLoadCounter""",
+        }, # column
+        "pethPsePortShortCounter" : {
+            "nodetype" : "column",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.1.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter is incremented when the PSE state diagram
+enters the state ERROR_DELAY_SHORT.""",
+            "reference" :
+                """IEEE Std 802.3af Section 30.9.1.1.10
+aPSEShortCounter""",
+        }, # column
+        "pethMainPseObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.3",
+        }, # node
+        "pethMainPseTable" : {
+            "nodetype" : "table",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.3.1",
+            "status" : "current",
+            "description" :
+                """A table of objects that display and control attributes
+of the main power source in a PSE  device.  Ethernet
+switches are one example of boxes that would support
+these objects.
+Values of all read-write objects in this table are
+persistent at restart/reboot.""",
+        }, # table
+        "pethMainPseEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.3.1.1",
+            "status" : "current",
+            "linkage" : [
+                "pethMainPseGroupIndex",
+            ],
+            "description" :
+                """A set of objects that display and control the Main
+power of a PSE. """,
+        }, # row
+        "pethMainPseGroupIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.3.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """This variable uniquely identifies the group to which
+power Ethernet PSE is connected.  Group means (box in
+the stack, module in a rack) and the value 1 MUST be
+used for non-modular devices.  Furthermore, the same
+value MUST be used in this variable, pethPsePortGroupIndex,
+and pethNotificationControlGroupIndex to refer to a
+given box in a stack or module in a rack.""",
+        }, # column
+        "pethMainPsePower" : {
+            "nodetype" : "column",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.3.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "parent module" : {
+                        "name" : "SNMPv2-SMI",
+                        "type" : "Gauge32",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "Watts",
+            "description" :
+                """The nominal power of the PSE expressed in Watts.""",
+        }, # column
+        "pethMainPseOperStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.3.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "on" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "off" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "faulty" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The operational status of the main PSE.""",
+        }, # column
+        "pethMainPseConsumptionPower" : {
+            "nodetype" : "column",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.3.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Gauge32"},
+            },
+            "access" : "readonly",
+            "units" : "Watts",
+            "description" :
+                """Measured usage power expressed in Watts.""",
+        }, # column
+        "pethMainPseUsageThreshold" : {
+            "nodetype" : "column",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.3.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "99"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "99"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "units" : "%",
+            "description" :
+                """The usage threshold expressed in percents for
+comparing the measured power and initiating
+an alarm if the threshold is exceeded.""",
+        }, # column
+        "pethNotificationControl" : {
+            "nodetype" : "node",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.4",
+        }, # node
+        "pethNotificationControlTable" : {
+            "nodetype" : "table",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.4.1",
+            "status" : "current",
+            "description" :
+                """A table of objects that display and control the
+Notification on a PSE  device.
+Values of all read-write objects in this table are
+persistent at restart/reboot.""",
+        }, # table
+        "pethNotificationControlEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.4.1.1",
+            "status" : "current",
+            "linkage" : [
+                "pethNotificationControlGroupIndex",
+            ],
+            "description" :
+                """A set of objects that control the Notification events.""",
+        }, # row
+        "pethNotificationControlGroupIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.4.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """This variable uniquely identifies the group.  Group
+means box in the stack, module in a rack and the value
+1 MUST be used for non-modular devices.  Furthermore,
+the same value MUST be used in this variable,
+pethPsePortGroupIndex, and
+pethMainPseGroupIndex to refer to a given box in a
+stack or module in a rack. """,
+        }, # column
+        "pethNotificationControlEnable" : {
+            "nodetype" : "column",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.1.4.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object controls, on a per-group basis, whether
+or not notifications from the agent are enabled.  The
+value true(1) means that notifications are enabled; the
+value false(2) means that they are not.""",
+        }, # column
+        "pethConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.2",
+        }, # node
+        "pethCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.2.1",
+        }, # node
+        "pethGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.2.2",
+        }, # node
+    }, # nodes
+
+    "notifications" : {
+        "pethPsePortOnOffNotification" : {
+            "nodetype" : "notification",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.0.1",
+            "status" : "current",
+            "objects" : {
+                "pethPsePortDetectionStatus" : {
+                    "nodetype" : "object",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+            },
+            "description" :
+                """ This Notification indicates if Pse Port is delivering or
+not power to the PD.  This Notification SHOULD be sent on
+every status change except in the searching mode.
+At least 500 msec must elapse between notifications
+being emitted by the same object instance.""",
+        }, # notification
+        "pethMainPowerUsageOnNotification" : {
+            "nodetype" : "notification",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.0.2",
+            "status" : "current",
+            "objects" : {
+                "pethMainPseConsumptionPower" : {
+                    "nodetype" : "object",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+            },
+            "description" :
+                """ This Notification indicate PSE Threshold usage
+indication is on, the usage power is above the
+threshold.  At least 500 msec must elapse between
+notifications being emitted by the same object
+instance.""",
+        }, # notification
+        "pethMainPowerUsageOffNotification" : {
+            "nodetype" : "notification",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.0.3",
+            "status" : "current",
+            "objects" : {
+                "pethMainPseConsumptionPower" : {
+                    "nodetype" : "object",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+            },
+            "description" :
+                """ This Notification indicates PSE Threshold usage indication
+off, the usage power is below the threshold.
+At least 500 msec must elapse between notifications being
+emitted by the same object instance.""",
+        }, # notification
+    }, # notifications
+
+    "groups" : {
+        "pethPsePortGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.2.2.1",
+            "status" : "current",
+            "members" : {
+                "pethPsePortAdminEnable" : {
+                    "nodetype" : "member",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+                "pethPsePortPowerPairsControlAbility" : {
+                    "nodetype" : "member",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+                "pethPsePortPowerPairs" : {
+                    "nodetype" : "member",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+                "pethPsePortDetectionStatus" : {
+                    "nodetype" : "member",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+                "pethPsePortPowerPriority" : {
+                    "nodetype" : "member",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+                "pethPsePortMPSAbsentCounter" : {
+                    "nodetype" : "member",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+                "pethPsePortInvalidSignatureCounter" : {
+                    "nodetype" : "member",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+                "pethPsePortPowerDeniedCounter" : {
+                    "nodetype" : "member",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+                "pethPsePortOverLoadCounter" : {
+                    "nodetype" : "member",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+                "pethPsePortShortCounter" : {
+                    "nodetype" : "member",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+                "pethPsePortType" : {
+                    "nodetype" : "member",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+                "pethPsePortPowerClassifications" : {
+                    "nodetype" : "member",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+            }, # members
+            "description" :
+                """PSE Port objects.""",
+        }, # group
+        "pethMainPseGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.2.2.2",
+            "status" : "current",
+            "members" : {
+                "pethMainPsePower" : {
+                    "nodetype" : "member",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+                "pethMainPseOperStatus" : {
+                    "nodetype" : "member",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+                "pethMainPseConsumptionPower" : {
+                    "nodetype" : "member",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+                "pethMainPseUsageThreshold" : {
+                    "nodetype" : "member",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+            }, # members
+            "description" :
+                """Main PSE Objects. """,
+        }, # group
+        "pethNotificationControlGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.2.2.3",
+            "status" : "current",
+            "members" : {
+                "pethNotificationControlEnable" : {
+                    "nodetype" : "member",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+            }, # members
+            "description" :
+                """Notification Control  Objects. """,
+        }, # group
+        "pethPsePortNotificationGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.2.2.4",
+            "status" : "current",
+            "members" : {
+                "pethPsePortOnOffNotification" : {
+                    "nodetype" : "member",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+            }, # members
+            "description" :
+                """Pse Port Notifications.""",
+        }, # group
+        "pethMainPowerNotificationGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.2.2.5",
+            "status" : "current",
+            "members" : {
+                "pethMainPowerUsageOnNotification" : {
+                    "nodetype" : "member",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+                "pethMainPowerUsageOffNotification" : {
+                    "nodetype" : "member",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+            }, # members
+            "description" :
+                """Main PSE Notifications.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "pethCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "POWER-ETHERNET-MIB",
+            "oid" : "1.3.6.1.2.1.105.2.1.1",
+            "status" : "current",
+            "description" :
+                """Describes the requirements for conformance to the
+Power Ethernet MIB.""",
+            "requires" : {
+                "pethPsePortGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+                "pethPsePortNotificationGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+                "pethNotificationControlGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "POWER-ETHERNET-MIB"
+                },
+                "pethMainPseGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "POWER-ETHERNET-MIB",
+                    "description" :
+                        """The pethMainPseGroup is mandatory for PSE systems
+that implement a main power supply.""",
+                },
+                "pethMainPowerNotificationGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "POWER-ETHERNET-MIB",
+                    "description" :
+                        """The pethMainPowerNotificationGroup is mandatory for
+PSE systems that implement a main power supply.""",
+                },
+            }, # requires
+        }, # compliance
+    }, # compliances
+
+}