logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/PKTC-IETF-SIG-MIB.dic

@@ -0,0 +1,4713 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python PKTC-IETF-SIG-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/PKTC-IETF-SIG-MIB"
+
+MIB = {
+    "moduleName" : "PKTC-IETF-SIG-MIB",
+
+    "PKTC-IETF-SIG-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF IPCDN Working Group""",
+        "contact" : 
+            """Sumanth Channabasappa
+Cable Television Laboratories, Inc.
+858 Coal Creek Circle,
+Louisville, CO 80027, USA
+Phone: +1 303-661-3307
+Email: Sumanth@cablelabs.com
+
+Gordon Beacham
+Motorola, Inc.
+6450 Sequence Drive, Bldg. 1
+San Diego, CA 92121, USA
+Phone: +1 858-404-2334
+Email: gordon.beacham@motorola.com
+
+Satish Kumar Mudugere Eswaraiah
+Texas Instruments India (P) Ltd.,
+Golf view, Wind Tunnel Road
+Murugesh Palya
+Bangalore 560 017, INDIA
+Phone:   +91 80 5269451
+Email:  satish.kumar@ti.com
+
+IETF IPCDN Working Group
+General Discussion: ipcdn@ietf.org
+Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn
+Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn
+Co-Chair: Jean-Francois Mule, jf.mule@cablelabs.com
+Co-Chair: Richard Woundy, Richard_Woundy@cable.comcast.com""",
+        "description" :
+            """This MIB module supplies the basic management
+objects for the PacketCable and IPCablecom Signaling
+protocols.  This version of the MIB includes
+common signaling and Network Call Signaling
+
+
+
+(NCS)-related signaling objects.
+
+Copyright (C) The IETF Trust (2008).  This version of
+this MIB module is part of RFC 5098; see the RFC itself for
+full legal notices.""",
+        "revisions" : (
+            {
+                "date" : "2007-12-18 00:00",
+                "description" :
+                    """Initial version, published as RFC 5098.""",
+            },
+        ),
+        "identity node" : "pktcIetfSigMib",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "SNMPv2-SMI", "name" : "Unsigned32"},
+        {"module" : "SNMPv2-SMI", "name" : "mib-2"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetAddressType"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetAddress"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetPortNumber"},
+        {"module" : "SNMPv2-TC", "name" : "TEXTUAL-CONVENTION"},
+        {"module" : "SNMPv2-TC", "name" : "RowStatus"},
+        {"module" : "SNMPv2-TC", "name" : "TruthValue"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+        {"module" : "IF-MIB", "name" : "ifIndex"},
+        {"module" : "DIFFSERV-DSCP-TC", "name" : "Dscp"},
+    ),
+
+    "typedefs" : {
+        "TenthdBm" : {
+            "basetype" : "Integer32",
+            "status" : "current",
+            "format" : "d-1",
+            "description" :
+                """This TEXTUAL-CONVENTION represents power levels that are
+normally expressed in dBm.  Units are in tenths of a dBm;
+for example, -13.5 dBm will be represented as -135.""",
+        },
+        "PktcCodecType" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "other" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "unknown" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "g729" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "reserved" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "g729E" : {
+                "nodetype" : "namednumber",
+                "number" : "5"
+            },
+            "pcmu" : {
+                "nodetype" : "namednumber",
+                "number" : "6"
+            },
+            "g726at32" : {
+                "nodetype" : "namednumber",
+                "number" : "7"
+            },
+            "g728" : {
+                "nodetype" : "namednumber",
+                "number" : "8"
+            },
+            "pcma" : {
+                "nodetype" : "namednumber",
+                "number" : "9"
+            },
+            "g726at16" : {
+                "nodetype" : "namednumber",
+                "number" : "10"
+            },
+            "g726at24" : {
+                "nodetype" : "namednumber",
+                "number" : "11"
+            },
+            "g726at40" : {
+                "nodetype" : "namednumber",
+                "number" : "12"
+            },
+            "ilbc" : {
+                "nodetype" : "namednumber",
+                "number" : "13"
+            },
+            "bv16" : {
+                "nodetype" : "namednumber",
+                "number" : "14"
+            },
+            "description" :
+                """ This TEXTUAL-CONVENTION defines various types of codecs
+that MAY be supported.  The description for each
+enumeration is listed below:
+
+Enumeration     Description
+other           a defined codec not in the enumeration
+unknown         a codec not defined by the PacketCable
+                Codec Specification
+g729            ITU-T Recommendation G.729
+reserved        for future use
+g729E           ITU-T Recommendation G.729E
+pcmu            Pulse Code Modulation u-law (PCMU)
+g726at32        ITU-T Recommendation G.726-32 (32 kbit/s)
+g728            ITU-T Recommendation G.728
+pcma            Pulse Code Modulation a-law (PCMA)
+g726at16        ITU-T Recommendation G.726-16 (16 kbit/s)
+g726at24        ITU-T Recommendation G.726-24 (24 kbit/s)
+g726at40        ITU-T Recommendation G.726-40 (40 kbit/s)
+ilbc            IETF Internet low-bit rate codec
+bv16            Broadcom BroadVoice16
+
+The list of codecs is consistent with the IETF
+Real-Time Transport Protocol (RTP) Profile registry and
+
+
+
+the RTP Map Parameters Table in PacketCable Audio/Video
+Codecs Specification [PKT-SP-CODEC].  The literal codec
+name for each codec is listed below:
+
+Codec     Literal Codec Name
+g729              G729
+g729E             G729E
+pcmu              PCMU
+g726at32          G726-32
+g728              G728
+pcma              PCMA
+g726at16          G726-16
+g726at24          G726-24
+g726at40          G726-40
+ilbc              iLBC
+bv16              BV16
+
+The literal codec name is the second column of the table
+with codec RTP Map Parameters.  The Literal Codec Name Column
+contains the codec name used in the local connection
+options (LCO) of the NCS messages create connection
+(CRCX)/modify connection (MDCX) and is also used to
+identify the codec in the Call Management System (CMS)
+Provisioning Specification.  The RTP Map Parameter column of
+the Table contains the string used in the media attribute
+line (a=) of the session description protocol (SDP)
+parameters in NCS messages.""",
+        },
+        "PktcRingCadence" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "4",
+                "max" : "36"
+            },
+            ],
+            "range" : {
+                "min" : "4",
+                "max" : "36"
+            },
+            "description" :
+                """This object provides an encoding scheme for ring
+
+
+
+cadences, including repeatability characteristics.  All
+fields in this object MUST be encoded in network-byte
+order.
+
+The first three higher-order octets are reserved.  The
+octets that follow are used to encode a 'bit-string', with
+each bit corresponding to 50 milliseconds.  A bit value of
+'1' indicates the presence of a ring-tone, and a bit value
+of '0' indicates the absence of a ring-tone, for that
+duration (50 ms) (Note: A minimum number of octets
+required to encode the bit-string MUST be used).
+
+The first two of the reserved octets MUST indicate the
+length of the encoded cadence (in bits) and MUST range
+between 1 and 264.  (Note: The length in bits MUST also be
+consistent with the number of octets that encode the
+cadence).  The MTA MUST ignore any unused bits in the last
+octet, but MUST reflect the value as provided on
+subsequent SNMP GETs.
+
+The third of the reserved octets indicates 'repeatability'
+and MUST be either 0x80 or 0x00 -- the former value
+indicating 'non-repeatability', and the latter indicating
+'repeatability'.
+
+The MTA MUST reject attempts to set a value that violates
+any of the above requirements.""",
+        },
+        "PktcSigType" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "other" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "ncs" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "description" :
+                """ This object lists the various types of signaling that may
+be supported:
+
+other(1) - set when signaling other than NCS is used
+ncs(2)   - Network Call Signaling is a derivation of MGCP
+          (Media Gateway Control Protocol) defined for
+           IPCablecom/PacketCable MTAs.""",
+        },
+        "DtmfCode" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "dtmfcode0" : {
+                "nodetype" : "namednumber",
+                "number" : "0"
+            },
+            "dtmfcode1" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "dtmfcode2" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "dtmfcode3" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "dtmfcode4" : {
+                "nodetype" : "namednumber",
+                "number" : "4"
+            },
+            "dtmfcode5" : {
+                "nodetype" : "namednumber",
+                "number" : "5"
+            },
+            "dtmfcode6" : {
+                "nodetype" : "namednumber",
+                "number" : "6"
+            },
+            "dtmfcode7" : {
+                "nodetype" : "namednumber",
+                "number" : "7"
+            },
+            "dtmfcode8" : {
+                "nodetype" : "namednumber",
+                "number" : "8"
+            },
+            "dtmfcode9" : {
+                "nodetype" : "namednumber",
+                "number" : "9"
+            },
+            "dtmfcodeStar" : {
+                "nodetype" : "namednumber",
+                "number" : "10"
+            },
+            "dtmfcodeHash" : {
+                "nodetype" : "namednumber",
+                "number" : "11"
+            },
+            "dtmfcodeA" : {
+                "nodetype" : "namednumber",
+                "number" : "12"
+            },
+            "dtmfcodeB" : {
+                "nodetype" : "namednumber",
+                "number" : "13"
+            },
+            "dtmfcodeC" : {
+                "nodetype" : "namednumber",
+                "number" : "14"
+            },
+            "dtmfcodeD" : {
+                "nodetype" : "namednumber",
+                "number" : "15"
+            },
+            "description" :
+                """This TEXTUAL-CONVENTION represents the Dual-Tone
+Multi-Frequency (DTMF) Character used
+to indicate the start or end of the digit transition
+sequence used for caller id or Visual Message Waiting
+Indicator (VMWI).
+
+Note: The DTMF code '*' is indicated using 'dtmfcodeStar',
+and the DTMF code '#' is indicated using ' dtmfcodeHash'.""",
+        },
+        "PktcSubscriberSideSigProtocol" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "fsk" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "dtmf" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "description" :
+                """This TEXTUAL-CONVENTION represents the Signaling
+protocol being used for purposes such as caller id
+or VMWI.
+
+A value of fsk(1) indicates Frequency Shift Keying
+(FSK).
+A value of dtmf(2) indicates Dual-Tone Multi-Frequency
+(DTMF).""",
+        },
+    }, # typedefs
+
+    "nodes" : {
+        "pktcIetfSigMib" : {
+            "nodetype" : "node",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169",
+            "status" : "current",
+        }, # node
+        "pktcSigNotification" : {
+            "nodetype" : "node",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.0",
+        }, # node
+        "pktcSigMibObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1",
+        }, # node
+        "pktcSigDevObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1",
+        }, # node
+        "pktcSigDevCodecTable" : {
+            "nodetype" : "table",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.1",
+            "status" : "current",
+            "description" :
+                """ This table describes the MTA-supported codec types.  An MTA
+MUST populate this table with all possible combinations of
+codecs it supports for simultaneous operation.  For example,
+an MTA with two endpoints may be designed with a particular
+Digital Signal Processing (DSP) and memory architecture that
+allows it to support the following fixed combinations of
+codecs for simultaneous operation:
+
+Codec Type     Maximum Number of Simultaneous Codecs
+PCMA                             3
+
+PCMA                             2
+PCMU                             1
+
+PCMA                             1
+
+PCMU                             2
+
+PCMU                             3
+
+PCMA                             1
+G729                             1
+
+G729                             2
+
+PCMU                             1
+G729                             1
+
+Based on this example, the entries in the codec table
+would be:
+
+  pktcSigDev        pktcSigDev        pktcSigDev
+CodecComboIndex     CodecType          CodecMax
+       1               pcma                3
+       2               pcma                2
+       2               pcmu                1
+
+
+
+       3               pcma                1
+       3               pcmu                2
+       4               pcmu                3
+       5               pcma                1
+       5               g729                1
+       6               g729                2
+       7               pcmu                1
+       7               g729                1
+
+An operator querying this table is able to determine all
+possible codec combinations the MTA is capable of
+simultaneously supporting.
+
+This table MUST NOT include non-voice codecs.""",
+        }, # table
+        "pktcSigDevCodecEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.1.1",
+            "status" : "current",
+            "linkage" : [
+                "pktcSigDevCodecComboIndex",
+                "pktcSigDevCodecType",
+            ],
+            "description" :
+                """Each entry represents the maximum number of active
+connections with a particular codec the MTA is capable of
+supporting.  Each row is indexed by a composite key
+consisting of a number enumerating the particular codec
+combination and the codec type.""",
+        }, # row
+        "pktcSigDevCodecComboIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """ The index value that enumerates a particular codec
+combination in the pktcSigDevCodecTable.""",
+        }, # column
+        "pktcSigDevCodecType" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PKTC-IETF-SIG-MIB", "name" : "PktcCodecType"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """ A codec type supported by this MTA.""",
+        }, # column
+        "pktcSigDevCodecMax" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """ The maximum number of simultaneous sessions of a
+particular codec that the MTA can support.""",
+        }, # column
+        "pktcSigDevEchoCancellation" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readonly",
+            "description" :
+                """ This object specifies if the device is capable of echo
+cancellation.  The MTA MUST set this MIB object to a
+value of true(1) if it is capable of echo
+cancellation, and a value of false(2) if not.""",
+        }, # scalar
+        "pktcSigDevSilenceSuppression" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readonly",
+            "description" :
+                """ This object specifies if the device is capable of
+silence suppression (as a result of Voice Activity
+Detection).  The MTA MUST set this MIB object to a
+value of true(1) if it is capable of silence
+suppression, and a value of false(2) if not.""",
+        }, # scalar
+        "pktcSigDevCidSigProtocol" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PKTC-IETF-SIG-MIB", "name" : "PktcSubscriberSideSigProtocol"},
+            },
+            "access" : "readwrite",
+            "default" : "fsk",
+            "description" :
+                """This object is used to configure the subscriber-line
+protocol used for signaling on-hook caller id information.
+
+
+
+Different countries define different caller id signaling
+protocols to support caller identification.
+
+Setting this object at a value fsk(1) sets the subscriber
+line protocol to be Frequency Shift Keying (FSK).
+
+Setting this object at a value dtmf(2) sets the subscriber
+line protocol to be Dual-Tone Multi-Frequency (DTMF).
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+            "reference" :
+                """ETSI-EN-300-659-1 Specification""",
+        }, # scalar
+        "pktcSigDevR0Cadence" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PKTC-IETF-SIG-MIB", "name" : "PktcRingCadence"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """ This object specifies ring cadence 0 (a user-defined
+field).
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+        }, # scalar
+        "pktcSigDevR1Cadence" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PKTC-IETF-SIG-MIB", "name" : "PktcRingCadence"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """ This object specifies ring cadence 1 (a user-defined
+field).
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+        }, # scalar
+        "pktcSigDevR2Cadence" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PKTC-IETF-SIG-MIB", "name" : "PktcRingCadence"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """ This object specifies ring cadence 2 (a user-defined
+field).
+
+
+
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+        }, # scalar
+        "pktcSigDevR3Cadence" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PKTC-IETF-SIG-MIB", "name" : "PktcRingCadence"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """ This object specifies ring cadence 3 (a user-defined
+field).
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+        }, # scalar
+        "pktcSigDevR4Cadence" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PKTC-IETF-SIG-MIB", "name" : "PktcRingCadence"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """ This object specifies ring cadence 4 (a user-defined
+field).
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+        }, # scalar
+        "pktcSigDevR5Cadence" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PKTC-IETF-SIG-MIB", "name" : "PktcRingCadence"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """ This object specifies ring cadence 5 (a user-defined
+field).
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+        }, # scalar
+        "pktcSigDevR6Cadence" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PKTC-IETF-SIG-MIB", "name" : "PktcRingCadence"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """ This object specifies ring cadence 6 (a user-defined
+field).
+
+
+
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+        }, # scalar
+        "pktcSigDevR7Cadence" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PKTC-IETF-SIG-MIB", "name" : "PktcRingCadence"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """ This object specifies ring cadence 7 (a user-defined
+field).
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+        }, # scalar
+        "pktcSigDevRgCadence" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PKTC-IETF-SIG-MIB", "name" : "PktcRingCadence"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """ This object specifies ring cadence rg (a user-defined
+field).
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+        }, # scalar
+        "pktcSigDevRsCadence" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PKTC-IETF-SIG-MIB", "name" : "PktcRingCadence"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """ This object specifies ring cadence rs (a user-defined
+field).  The MTA MUST reject any attempt to make this object
+repeatable.
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+        }, # scalar
+        "pktcSigDefCallSigDscp" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIFFSERV-DSCP-TC", "name" : "Dscp"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """ The default value used in the IP header for setting the
+Differentiated Services Code Point (DSCP) value for call
+
+
+
+signaling.
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+        }, # scalar
+        "pktcSigDefMediaStreamDscp" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIFFSERV-DSCP-TC", "name" : "Dscp"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """ This object contains the default value used in the IP
+header for setting the Differentiated Services Code Point
+(DSCP) value for media stream packets.  The MTA MUST NOT
+update this object with the value supplied by the CMS in
+the NCS messages (if present).  Any currently active
+connections are not affected by updates to this object.
+When the value of this object is updated by SNMP, the MTA
+MUST use the new value as a default starting only from
+new connections.
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+        }, # scalar
+        "pktcSigCapabilityTable" : {
+            "nodetype" : "table",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.17",
+            "status" : "current",
+            "description" :
+                """ This table describes the signaling types supported by this
+MTA.""",
+        }, # table
+        "pktcSigCapabilityEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.17.1",
+            "status" : "current",
+            "linkage" : [
+                "pktcSigCapabilityIndex",
+            ],
+            "description" :
+                """ Entries in pktcMtaDevSigCapabilityTable - list of
+supported signaling types, versions, and vendor extensions
+
+
+
+for this MTA.  Each entry in the list provides for one
+signaling type and version combination.  If the device
+supports multiple versions of the same signaling type, it
+will require multiple entries.""",
+        }, # row
+        "pktcSigCapabilityIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.17.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """ The index value that uniquely identifies an entry in the
+pktcSigCapabilityTable.""",
+        }, # column
+        "pktcSigCapabilityType" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.17.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PKTC-IETF-SIG-MIB", "name" : "PktcSigType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """ This object identifies the type of signaling used.  This
+value has to be associated with a single signaling
+version.""",
+        }, # column
+        "pktcSigCapabilityVersion" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.17.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+            },
+            "access" : "readonly",
+            "description" :
+                """ Provides the version of the signaling type - reference
+pktcSigCapabilityType.  Examples would be 1.0 or 2.33 etc.""",
+        }, # column
+        "pktcSigCapabilityVendorExt" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.17.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+            },
+            "access" : "readonly",
+            "description" :
+                """ The vendor extension allows vendors to provide a list of
+
+
+
+additional capabilities.
+
+The syntax for this MIB object in ABNF ([RFC5234]) is
+specified to be zero or more occurrences of vendor
+extensions, as follows:
+
+ pktcSigCapabilityVendorExt  = *(vendor-extension)
+ vendor-extension = (ext symbol alphanum) DQUOTE ; DQUOTE
+ ext      = DQUOTE %x58 DQUOTE
+ symbol   = (DQUOTE %x2D DQUOTE)/(DQUOTE %x2D DQUOTE)
+ alphanum = 1*6(ALPHA/DIGIT)""",
+        }, # column
+        "pktcSigDefNcsReceiveUdpPort" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.18",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "parent module" : {
+                        "name" : "INET-ADDRESS-MIB",
+                        "type" : "InetPortNumber",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "1025",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1025",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """ This object contains the MTA User Datagram Protocol (UDP)
+receive port that is being used for NCS call signaling.
+This object should only be changed by the configuration
+file.
+
+Unless changed via configuration, this MIB object MUST
+reflect a value of '2427'.""",
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # scalar
+        "pktcSigPowerRingFrequency" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.19",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "f20Hz" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "f25Hz" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "f33Point33Hz" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "f50Hz" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "f15Hz" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "f16Hz" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "f22Hz" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                    "f23Hz" : {
+                        "nodetype" : "namednumber",
+                        "number" : "8"
+                    },
+                    "f45Hz" : {
+                        "nodetype" : "namednumber",
+                        "number" : "9"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """ This object must only be provided via the configuration
+file during the provisioning process.  The power ring
+
+
+
+frequency is the frequency at which the sinusoidal voltage
+must travel down the twisted pair to make terminal
+equipment ring.  Different countries define different
+electrical characteristics to make terminal equipment
+ring.
+
+The f20Hz setting corresponds to a power ring frequency
+of 20 Hertz.  The f25Hz setting corresponds to a power ring
+frequency of 25 Hertz.  The f33Point33Hz setting
+corresponds to a power ring frequency of 33.33 Hertz.  The
+f50Hz setting corresponds to a power ring frequency of 50
+Hertz.  The f15Hz setting corresponds to a power ring
+frequency of 15 Hertz.  The f16Hz setting corresponds to a
+power ring frequency of 16 Hertz.  The f22Hz setting
+corresponds to a power ring frequency of 22 Hertz.  The
+f23Hz setting corresponds to a power ring frequency of 23
+Hertz.  The f45Hz setting corresponds to a power ring
+frequency of 45 Hertz.""",
+            "reference" :
+                """ETSI-EN-300-001""",
+        }, # scalar
+        "pktcSigPulseSignalTable" : {
+            "nodetype" : "table",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.20",
+            "status" : "current",
+            "description" :
+                """ The Pulse signal table defines the pulse signal operation.
+There are nine types of international pulse signals,
+with each signal having a set of provisionable parameters.
+The values of the MIB objects in this table take effect
+only if these parameters are not defined via signaling, in
+which case, the latter determines the values of the
+parameters.  The MIB objects in this table do not persist
+across MTA reboots.""",
+            "reference" :
+                """ETSI-TS-101-909-4 Specification""",
+        }, # table
+        "pktcSigPulseSignalEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.20.1",
+            "status" : "current",
+            "linkage" : [
+                "pktcSigPulseSignalType",
+            ],
+            "description" :
+                """ This object defines the set of parameters associated with
+each particular value of pktcSigPulseSignalType.  Each
+entry in the pktcSigPulseSignalTable is indexed by the
+pktcSigPulseSignalType object.
+
+
+
+The conceptual rows MUST NOT persist across MTA reboots.""",
+        }, # row
+        "pktcSigPulseSignalType" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.20.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "initialRing" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "pulseLoopClose" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "pulseLoopOpen" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "enableMeterPulse" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "meterPulseBurst" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "pulseNoBattery" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "pulseNormalPolarity" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                    "pulseReducedBattery" : {
+                        "nodetype" : "namednumber",
+                        "number" : "8"
+                    },
+                    "pulseReversePolarity" : {
+                        "nodetype" : "namednumber",
+                        "number" : "9"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """There are nine types of international pulse signals.  These
+signals are defined as follows:
+initial ring
+pulse loop close
+pulse loop open
+enable meter pulse
+meter pulse burst
+pulse no battery
+pulse normal polarity
+pulse reduced battery
+pulse reverse polarity""",
+            "reference" :
+                """ETSI-EN-300-324-1 Specification""",
+        }, # column
+        "pktcSigPulseSignalFrequency" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.20.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "twentyfive" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "twelvethousand" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "sixteenthousand" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """ This object is only applicable to the initialRing,
+enableMeterPulse, and meterPulseBurst signal types.  This
+object identifies the frequency of the generated signal.
+The following table defines the default values for this
+object depending on signal type:
+
+pktcSigPulseSignalType     Default
+initialRing                25
+enableMeterPulse           16000
+meterPulseBurst            16000
+
+The value of twentyfive MUST only be used for the
+initialRing signal type.  The values of twelvethousand and
+sixteenthousand MUST only be used for enableMeterPulse and
+meterPulseBurst signal types.  An attempt to set this
+object while the value of pktcSigPulseSignalType is not
+initialRing, enableMeterPulse, or meterPulseBurst will
+result in an 'inconsistentValue' error.""",
+            "reference" :
+                """ETSI-EN-300-001 Specification""",
+        }, # column
+        "pktcSigPulseSignalDbLevel" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.20.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "parent module" : {
+                        "name" : "PKTC-IETF-SIG-MIB",
+                        "type" : "TenthdBm",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "-350",
+                        "max" : "0"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-350",
+                        "max" : "0"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "-135",
+            "units" : "1/10 of a dBm",
+            "description" :
+                """ This object is only applicable to the enableMeterPulse and
+meterPulseBurst signal types.  This is the decibel level
+for each frequency at which tones could be generated at
+the a and b terminals (TE connection point).  An attempt to
+set this object while the value of pktcSigPulseSignalType
+is not enableMeterPulse or meterPulseBurst will result in
+an 'inconsistentValue' error.""",
+            "reference" :
+                """ETSI-EN-300-001 Specification""",
+        }, # column
+        "pktcSigPulseSignalDuration" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.20.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "5000"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "5000"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "units" : "Milliseconds",
+            "description" :
+                """ This object specifies the pulse duration for each
+signal type.  In addition, the MTA must accept the values
+in the incremental steps specific for each signal type.
+The following table defines the default values and the
+incremental steps for this object depending on the signal
+type:
+
+pktcSigPulseSignaltype  Default (ms)   Increment (ms)
+initialRing                 200             50
+pulseLoopClose              200             10
+pulseLoopOpen               200             10
+enableMeterPulse            150             10
+meterPulseBurst             150             10
+pulseNoBattery              200             10
+pulseNormalPolarity         200             10
+pulseReducedBattery         200             10
+pulseReversePolarity        200             10
+
+An attempt to set this object to a value that does not
+fall on one of the increment boundaries, or on the wrong
+increment boundary for the specific signal type, will
+result in an 'inconsistentValue' error.""",
+            "reference" :
+                """ETSI-EN-300-324-1 Specification""",
+        }, # column
+        "pktcSigPulseSignalPulseInterval" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.20.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "5000"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "5000"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "units" : "Milliseconds",
+            "description" :
+                """ This object specifies the repeat interval, or the period,
+for each signal type.  In addition, the MTA must accept
+the values in the incremental steps specific for each
+signal type.  The following table defines the default
+values and the incremental steps for this object, depending
+on the signal type:
+
+pktcSigPulseSignaltype  Default (ms)   Increment (ms)
+initialRing                 200             50
+pulseLoopClose             1000             10
+pulseLoopOpen              1000             10
+
+
+
+enableMeterPulse           1000             10
+meterPulseBurst            1000             10
+pulseNoBattery             1000             10
+pulseNormalPolarity        1000             10
+pulseReducedBattery        1000             10
+pulseReversePolarity       1000             10
+
+An attempt to set this object to a value that does not
+fall on one of the increment boundaries, or on the wrong
+increment boundary for the specific signal type, will
+result in an 'inconsistentValue' error.""",
+            "reference" :
+                """ETSI-EN-300-324-1 Specification""",
+        }, # column
+        "pktcSigPulseSignalRepeatCount" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.20.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "50"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "50"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """ This object specifies how many times to repeat a pulse.
+This object is not used by the enableMeterPulse signal
+type, and in that case, the value is irrelevant.  The
+following table defines the default values and the valid
+ranges for this object, depending on the signal type:
+
+pktcSigPulseSignaltype  Default   Range
+
+initialRing                1       1-5
+pulseLoopClose             1       1-50
+pulseLoopOpen              1       1-50
+enableMeterPulse      (any value)(but not used)
+meterPulseBurst            1       1-50
+pulseNoBattery             1       1-50
+pulseNormalPolarity        1       1-50
+pulseReducedBattery        1       1-50
+pulseReversePolarity       1       1-50
+
+An attempt to set this object to a value that does not
+fall within the range for the specific
+signal type will result in an 'inconsistentValue' error.""",
+        }, # column
+        "pktcSigDevCidMode" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.21",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "duringRingingETS" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "dtAsETS" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "rpAsETS" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "lrAsETS" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "lrETS" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "rpAsETS",
+            "description" :
+                """ For on-hook caller id, pktcSigDevCidMode selects the method
+for representing and signaling caller identification.  For
+the duringRingingETS method, the Frequency Shift Keying
+(FSK) or the Dual-Tone Multi-Frequency (DTMF) containing
+the caller identification information is sent between the
+first and second ring pattern.
+
+For the dtAsETS,rpAsETS, lrAsETS and lrETS
+methods, the FSK or DTMF containing the caller id
+information is sent before the first ring pattern.
+
+For the dtAsETS method, the FSK or DTMF is sent after the
+Dual Tone Alert Signal.  For the rpAsETS method, the FSK or
+DTMF is sent after a Ring Pulse.
+
+For the lrAsETS method, the Line Reversal occurs first,
+then the Dual Tone Alert Signal, and, finally, the FSK or
+DTMF is sent.
+
+For the lrETS method, the Line Reversal occurs first,
+then the FSK or DTMF is sent.
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+        }, # scalar
+        "pktcSigDevCidAfterRing" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.22",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "0"
+                    },
+                    {
+                        "min" : "50",
+                        "max" : "2000"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "2000"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "550",
+            "units" : "Milliseconds",
+            "description" :
+                """ This object specifies the delay between the end of first
+ringing pattern and the start of the transmission of the
+FSK or DTMF containing the caller id information.  It is
+only used when pktcSigDevCidMode is set to a value of
+'duringRingingETS'.
+
+The following table defines the default values
+for this MIB object, depending on the signal type
+
+
+
+(pktcSigDevCidMode), and MUST be followed:
+
+Value of pktcSigDevCidMode       Default value
+
+duringringingETS                 550 ms
+dtAsETS                          any value (not used)
+rpAsETS                          any value (not used)
+lrAsETS                          any value (not used)
+lrETS                            any value (not used)
+
+An attempt to set this object while the value of
+pktcSigDevCidMode is not duringringingETS will result in
+an 'inconsistentValue' error.
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+            "reference" :
+                """ETSI-EN-300-659-1 Specification""",
+        }, # scalar
+        "pktcSigDevCidAfterDTAS" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.23",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "0"
+                    },
+                    {
+                        "min" : "45",
+                        "max" : "500"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "500"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "50",
+            "units" : "Milliseconds",
+            "description" :
+                """ This object specifies the delay between the end of the
+Dual Tone Alert Signal (DT-AS) and the start of the
+transmission of the FSK or DTMF containing the caller id
+information.  This object is only used when
+pktcSigDevCidMode is set to a value of 'dtAsETS' or
+'lrAsETS'.
+
+The following table defines the default values
+for this MIB object, depending on the signal type
+(pktcSigDevCidMode), and MUST be followed:
+
+Value of pktcSigDevCidMode       Default value
+
+
+duringringingETS                 any value (not used)
+dtAsETS                          50 ms
+rpAsETS                          any value (not used)
+lrAsETS                          50 ms
+lrETS                            any value (not used)
+
+An attempt to set this object while the value of
+
+
+
+pktcSigDevCidMode is not 'dtAsETS' or 'lrAsETS' will
+result in an 'inconsistentValue' error.
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+            "reference" :
+                """ETSI-EN-300-659-1 Specification""",
+        }, # scalar
+        "pktcSigDevCidAfterRPAS" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.24",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "0"
+                    },
+                    {
+                        "min" : "500",
+                        "max" : "800"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "800"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "650",
+            "units" : "Milliseconds",
+            "description" :
+                """ This object specifies the delay between the end of the
+Ring Pulse Alert Signal (RP-AS) and the start of the
+transmission of the FSK or DTMF containing the caller id
+information.  This MIB object is only used when
+pktcSigDevCidMode is set to a value of 'rpAsETS'.
+The following table defines the default values
+for this MIB object, depending on the signal type
+(pktcSigDevCidMode), and MUST be followed:
+
+Value of pktcSigDevCidMode       Default value
+
+duringringingETS                 any value  (not used)
+dtAsETS                          any value  (not used)
+rpAsETS                          650 ms
+lrAsETS                          any value  (not used)
+lrETS                            any value  (not used)
+
+An attempt to set this object while the value of
+pktcSigDevCidMode is not 'rpAsETS' will result in an
+'inconsistentValue' error.
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+            "reference" :
+                """ETSI-EN-300-659-1 Specification""",
+        }, # scalar
+        "pktcSigDevRingAfterCID" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.25",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "0"
+                    },
+                    {
+                        "min" : "50",
+                        "max" : "500"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "500"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "250",
+            "units" : "Milliseconds",
+            "description" :
+                """ This object specifies the delay between the end of the
+complete transmission of the FSK or DTMF containing the
+caller id information and the start of the first ring
+pattern.  It is only used when pktcSigDevCidMode is
+set to a value of 'dtAsETS', 'rpAsETS', 'lrAsETS' or
+'lrETS'.
+
+The following table defines the default values
+for this MIB object, depending on the signal type
+(pktcSigDevCidMode), and MUST be followed:
+
+Value of pktcSigDevCidMode       Default value
+
+duringringingETS                 any value  (not used)
+dtAsETS                          250 ms
+rpAsETS                          250 ms
+lrAsETS                          250 ms
+lrETS                            250 ms
+
+An attempt to set this object while the value of
+pktcSigDevCidMode is not 'dtAsETS', 'rpAsETS',
+'lrAsETS', or 'lrETS' will result in an 'inconsistent
+value' error.
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+            "reference" :
+                """ETSI-EN-300-659-1 Specification""",
+        }, # scalar
+        "pktcSigDevCidDTASAfterLR" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.26",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "50",
+                        "max" : "655"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "50",
+                        "max" : "655"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "250",
+            "units" : "Milliseconds",
+            "description" :
+                """ This object specifies the delay between the end of the
+Line Reversal and the start of the Dual Tone Alert Signal
+(DT-AS).  This object is only used when pktcSigDevCidMode
+is set to a value of 'lrAsETS'.
+
+The following table defines the default values
+for this MIB object, depending on the signal type
+(pktcSigDevCidMode), and MUST be followed:
+
+
+
+
+Value of pktcSigDevCidMode       Default value
+
+duringringingETS                 any value  (not used)
+dtAsETS                          any value  (not used)
+rpAsETS                          any value  (not used)
+lrAsETS                          250 ms
+lrETS                            any value  (not used)
+
+An attempt to set this object while the value of
+pktcSigDevCidMode is not lrAsETS will result in an
+'inconsistentValue' error.
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+            "reference" :
+                """ETSI-EN-300-659-1 Specification""",
+        }, # scalar
+        "pktcSigDevVmwiMode" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.27",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "dtAsETS" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "rpAsETS" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "lrAsETS" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "osi" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "lrETS" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "rpAsETS",
+            "description" :
+                """ For visual message waiting indicator (VMWI),
+pktcSigDevVmwiMode selects the alerting signal method.  For
+the dtAsETS, rpAsETS, lrAsETS, osi, and lrETS methods,
+the FSK containing the VMWI information is sent after an
+alerting signal.
+
+For the dtAsETS method, the FSK, or DTMF
+is sent after the Dual Tone Alert Signal.  For the rpAsETS
+method, the FSK or DTMF is sent after a Ring Pulse.
+
+For the lrAsETS method, the Line Reversal occurs first,
+then the Dual Tone Alert Signal, and, finally, the FSK or
+DTMF is sent.
+
+For the OSI method, the FSK or DTMF is sent after the Open
+Switching Interval.
+
+
+
+
+For the lrETS method, the Line Reversal occurs first,
+then the FSK or DTMF is sent.
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+        }, # scalar
+        "pktcSigDevVmwiAfterDTAS" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.28",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "0"
+                    },
+                    {
+                        "min" : "45",
+                        "max" : "500"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "500"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "50",
+            "units" : "Milliseconds",
+            "description" :
+                """ This object specifies the delay between the end of the
+Dual Tone Alert Signal (DT-AS) and the start of the
+transmission of the FSK or DTMF containing the VMWI
+information.
+
+This object is only used when pktcSigDevVmwiMode is
+set to a value of 'dtAsETS' or 'lrAsETS'.
+
+The following table defines the default values
+for this MIB object, depending on the signal type
+(pktcSigDevVmwiMode), and MUST be followed:
+
+Value of pktcSigDevVmwiMode       Default value
+
+dtAsETS                           50 ms
+rpAsETS                           any value  (not used)
+lrAsETS                           50 ms
+lrETS                             any value  (not used)
+
+An attempt to set this object while the value of
+pktcSigDevVmwiMode is not 'dtAsETS' or 'lrAsETS' will
+result in an 'inconsistentValue' error.
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+            "reference" :
+                """ETSI-EN-300-659-1 Specification""",
+        }, # scalar
+        "pktcSigDevVmwiAfterRPAS" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.29",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "0"
+                    },
+                    {
+                        "min" : "500",
+                        "max" : "800"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "800"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "650",
+            "units" : "Milliseconds",
+            "description" :
+                """ This object specifies the delay between the end of the
+Ring Pulse Alert Signal (RP-AS) and the start of the
+transmission of the FSK or DTMF containing the VMWI
+information.
+
+This object is only used when pktcSigDevVmwiMode is
+set to a value of 'rpAsETS'.
+
+The following table defines the default values
+for this MIB object, depending on the signal type
+(pktcSigDevVmwiMode), and MUST be followed:
+
+Value of pktcSigDevVmwiMode       Default value
+
+dtAsETS                           any value  (not used)
+rpAsETS                           650 ms
+lrAsETS                           any value  (not used)
+lrETS                             any value  (not used)
+
+An attempt to set this object while the value of
+pktcSigDevVmwiMode is not 'rpAsETS' will result in an
+'inconsistentValue' error.
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+            "reference" :
+                """ETSI-EN-300-659-1 Specification""",
+        }, # scalar
+        "pktcSigDevVmwiDTASAfterLR" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.30",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "0"
+                    },
+                    {
+                        "min" : "50",
+                        "max" : "655"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "655"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "250",
+            "units" : "Milliseconds",
+            "description" :
+                """ This object specifies the delay between the end of the
+Line Reversal and the start of the Dual Tone Alert Signal
+(DT-AS) for VMWI information.  This object is only used
+when pktcSigDevVmwiMode is set to a value of 'lrAsETS'.
+
+The following table defines the default values
+for this MIB object, depending on the signal type
+(pktcSigDevVmwiMode), and MUST be followed:
+
+
+
+
+Value of pktcSigDevVmwiMode       Default value
+
+dtAsETS                           any value  (not used)
+rpAsETS                           any value  (not used)
+lrAsETS                           250 ms
+lrETS                             any value  (not used)
+
+An attempt to set this object while the value of
+pktcSigDevVmwiMode is not 'lrAsETS' will result in an
+'inconsistentValue' error.
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+            "reference" :
+                """ETSI-EN-300-659-1 Specification""",
+        }, # scalar
+        "pktcSigDevRingCadenceTable" : {
+            "nodetype" : "table",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.31",
+            "status" : "current",
+            "description" :
+                """Cadence rings are defined by the telco governing
+body for each country.  The MTA must be able to support
+various ranges of cadence patterns and cadence periods.
+The MTA will be able to support country-specific
+provisioning of the cadence and idle period.  Each
+cadence pattern will be assigned a unique value ranging
+from 0-127 (inclusive) corresponding to the value of x,
+where x is the value sent in the cadence ringing (cr)
+signal cr(x), requested per the appropriate NCS
+message, and defined in the E package.  The MTA will derive
+the cadence periods from the ring cadence table entry, as
+provisioned by the customer.  The MTA is allowed to provide
+appropriate default values for each of the ring cadences.
+This table only needs to be supported when the MTA
+implements the E package.""",
+            "reference" :
+                """ETSI-TS-101-909-4 Specification""",
+        }, # table
+        "pktcSigDevRingCadenceEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.31.1",
+            "status" : "current",
+            "linkage" : [
+                "pktcSigDevRingCadenceIndex",
+            ],
+            "description" :
+                """ Each entry in this row corresponds to a ring cadence
+that is being supported by the device.  The conceptual
+rows MUST NOT persist across MTA reboots.""",
+        }, # row
+        "pktcSigDevRingCadenceIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.31.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "127"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "127"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """ A unique value ranging from 0 to 127 that corresponds to the
+value sent by the LE based on country-specific cadences,
+one row per cadence cycle.  In any given system
+implementation for a particular country, it is anticipated
+that a small number of ring cadences will be in use.  Thus,
+this table most likely will not be populated to its full
+size.""",
+        }, # column
+        "pktcSigDevRingCadence" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.31.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PKTC-IETF-SIG-MIB", "name" : "PktcRingCadence"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This is the Ring Cadence.""",
+        }, # column
+        "pktcSigDevToneTable" : {
+            "nodetype" : "table",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.32",
+            "status" : "current",
+            "description" :
+                """ The Tone Table defines the composition of tones and
+various tone operations.
+
+The definition of the tones callWaiting1 through
+callWaiting4 in this table MUST only contain the
+audible tone itself; the delay between tones or the value
+of the tone repeat count are not applicable for the call
+waiting tones.
+
+
+
+
+The delay between tones or the repeat count is controlled
+by the objects pktcSigEndPntConfigCallWaitingDelay and
+pktcSigEndPntConfigCallWaitingMaxRep.  If the
+pktcSigDevToneType is set to either of the values
+callWaiting1, callWaiting2, callWaiting3, or callWaiting4,
+then the value of the pktcSigDevToneWholeToneRepeatCount
+object indicates that the particular frequency group is
+applicable, as a repeatable part of the tone, based on the
+value of the MIB object
+pktcSigDevToneWholeToneRepeatCount.
+
+The MTA MUST make sure that, after the provisioning
+cycle, the table is fully populated (i.e., for each
+possible index, an entry MUST be defined) using
+reasonable defaults for each row that was not defined
+by the provisioning information delivered via MTA
+Configuration.
+
+The frequency composition of each tone is defined by the
+pktcSigDevMultiFreqToneTable.  For each tone type defined
+in pktcSigDevToneTable, the MTA MUST populate at least
+one entry in the pktcSigDevMultiFreqToneTable.
+
+For each particular value of pktcSigDevToneType, the
+pktcSigDevToneTable table can define non-repeating and
+repeating groups of the frequencies defined by the
+pktcSigDevMultiFreqToneTable, such that each group is
+represented by the set of the consecutive rows
+(frequency group) in the pktcSigDevMultiFreqToneTable.
+
+Objects in this table do not persist across MTA reboots.
+For tones with multiple frequencies refer to the MIB table
+pktcSigDevMultiFreqToneTable.""",
+            "reference" :
+                """PacketCable NCS Specification, ETSI-TS-101-909-4
+Specification.""",
+        }, # table
+        "pktcSigDevToneEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.32.1",
+            "status" : "current",
+            "linkage" : [
+                "pktcSigDevToneType",
+                "pktcSigDevToneFreqGroup",
+            ],
+            "description" :
+                """ The different tone types that can be provisioned based on
+country-specific needs.
+
+Each entry contains the tone generation parameters for
+a specific frequency group of the specific Tone Type.
+
+
+
+The different parameters can be provisioned via MTA
+configuration based on country specific needs.
+An MTA MUST populate all entries of this table for each
+tone type.""",
+        }, # row
+        "pktcSigDevToneType" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.32.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "busy" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "confirmation" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "dial" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "messageWaiting" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "offHookWarning" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "ringBack" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                    "reOrder" : {
+                        "nodetype" : "namednumber",
+                        "number" : "7"
+                    },
+                    "stutterdial" : {
+                        "nodetype" : "namednumber",
+                        "number" : "8"
+                    },
+                    "callWaiting1" : {
+                        "nodetype" : "namednumber",
+                        "number" : "9"
+                    },
+                    "callWaiting2" : {
+                        "nodetype" : "namednumber",
+                        "number" : "10"
+                    },
+                    "callWaiting3" : {
+                        "nodetype" : "namednumber",
+                        "number" : "11"
+                    },
+                    "callWaiting4" : {
+                        "nodetype" : "namednumber",
+                        "number" : "12"
+                    },
+                    "alertingSignal" : {
+                        "nodetype" : "namednumber",
+                        "number" : "13"
+                    },
+                    "specialDial" : {
+                        "nodetype" : "namednumber",
+                        "number" : "14"
+                    },
+                    "specialInfo" : {
+                        "nodetype" : "namednumber",
+                        "number" : "15"
+                    },
+                    "release" : {
+                        "nodetype" : "namednumber",
+                        "number" : "16"
+                    },
+                    "congestion" : {
+                        "nodetype" : "namednumber",
+                        "number" : "17"
+                    },
+                    "userDefined1" : {
+                        "nodetype" : "namednumber",
+                        "number" : "18"
+                    },
+                    "userDefined2" : {
+                        "nodetype" : "namednumber",
+                        "number" : "19"
+                    },
+                    "userDefined3" : {
+                        "nodetype" : "namednumber",
+                        "number" : "20"
+                    },
+                    "userDefined4" : {
+                        "nodetype" : "namednumber",
+                        "number" : "21"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """A unique value that will correspond to the different
+tone types.  These tones can be provisioned based on
+country-specific needs.  This object defines the type
+of tone being accessed.
+
+The alertingSignal, specialDial, specialInfo, release,
+
+
+
+congestion, userDefined1, userDefined2, userDefined3,
+and userDefined4 tone types are used in
+the E line package.""",
+        }, # column
+        "pktcSigDevToneFreqGroup" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.32.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "4"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "4"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """This MIB object represents the Tone Sequence reference
+of a multi-sequence tone.""",
+        }, # column
+        "pktcSigDevToneFreqCounter" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.32.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "8"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "8"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This MIB object represents the number of consecutive
+multi-frequency tones for the particular tone type in
+the multi-frequency table (pktcSigDevMultiFreqToneTable).
+
+Such a sequence of the consecutive multi-frequency tones
+forms the tone group for the particular tone type in the
+pktcSigDevToneTable.""",
+        }, # column
+        "pktcSigDevToneWholeToneRepeatCount" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.32.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "5000"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "5000"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This is the repeat count, which signifies how many times
+to repeat the entire on-off cadence sequence.  Setting this
+object may result in a cadence duration longer or shorter
+than the overall signal duration specified by the time out
+(TO) object for a particular signal.  If the repeat count
+results in a longer tone duration than the signal duration
+specified by the TO, the tone duration defined by the
+TO object for a particular signal always represents
+the overall signal duration for a tone.  In this case, the
+tone duration repeat count will not be fully exercised, and
+the desired tone duration will be truncated per the TO
+setting.  If the repeat count results in a shorter tone
+duration than the signal duration specified by the TO, the
+tone duration defined by the repeat count takes precedence
+over the TO and will end the signal event.  In this case,
+
+
+
+the TO represents a time not to be exceeded for the signal.
+It is recommended to ensure proper telephony signaling so that
+the TO duration setting should always be longer than the
+desired repeat count-time duration.""",
+        }, # column
+        "pktcSigDevToneSteady" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.32.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This MIB object represents the steady tone status.  A value
+of 'true(1)' indicates that the steady tone is applied, and
+a value of 'false(2)' indicates otherwise.
+Devices must play out the on-off cadence sequence for
+the number of times indicated by the MIB object
+'pktcSigDevToneWholeToneRepeatCount' prior to applying the
+last tone steadily, indefinitely.  If the MIB table
+'pktcSigDevToneTable' contains multiple rows with this
+Object set to a value of 'true(1)', the steady tone is
+applied to the last repeating frequency group of the tone.
+
+Setting this MIB object may result in a tone duration that is
+longer or shorter than the overall signal duration
+specified by the time out (TO) MIB object for a particular
+signal.  If the repeat count results in a longer tone
+duration than the signal duration specified by the TO, the
+tone duration defined by the TO object for a particular
+signal always represents the overall signal duration for a
+tone.  In this case, the tone duration repeat count will
+not be fully exercised, and the desired tone duration will
+be truncated per the TO setting.  If the repeat count
+results in a shorter tone duration than the signal duration
+specified by the TO, the tone duration defined by the
+repeat count takes precedence over the TO and will end the
+signal event.  In this case, the TO represents a time not to
+be exceeded for the signal.
+
+It is recommended to ensure proper telephony signaling that
+The TO duration setting should always be longer than the
+desired repeat count-time duration, plus the desired maximum
+steady tone period.""",
+        }, # column
+        "pktcSigDevMultiFreqToneTable" : {
+            "nodetype" : "table",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.33",
+            "status" : "current",
+            "description" :
+                """ This MIB table defines the characteristics of tones
+with multiple frequencies.  The constraints imposed
+on the tones by the MIB table pktcSigDevToneTable
+need to be considered for MIB objects in this table
+as well.
+
+The MTA MUST populate the corresponding row(s)
+of the pktcSigDevMultiFreqToneTable for each tone
+defined in the pktcSigDevToneTable.
+
+The contents of the table may be provisioned via
+MTA configuration.""",
+            "reference" :
+                """PacketCable NCS Specification, ETSI-TS-101-909-4
+Specification.""",
+        }, # table
+        "pktcSigDevMultiFreqToneEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.33.1",
+            "status" : "current",
+            "linkage" : [
+                "pktcSigDevToneType",
+                "pktcSigDevToneNumber",
+            ],
+            "description" :
+                """ The different tone types with multiple frequencies
+that can be provisioned based on country-specific
+needs.""",
+        }, # row
+        "pktcSigDevToneNumber" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.33.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "8"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "8"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """This MIB object represents the frequency reference
+of a multi-frequency tone.""",
+        }, # column
+        "pktcSigDevToneFirstFreqValue" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.33.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4000"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4000"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This MIB object represents the value of the first
+frequency of a tone type.  A value of zero implies
+absence of the referenced frequency.""",
+        }, # column
+        "pktcSigDevToneSecondFreqValue" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.33.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4000"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4000"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This MIB object represents the value of the second
+frequency of a tone type.  A value of zero implies
+absence of the referenced frequency.""",
+        }, # column
+        "pktcSigDevToneThirdFreqValue" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.33.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4000"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4000"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This MIB object represents the value of the third
+frequency of a tone type.  A value of zero implies
+absence of the referenced frequency.""",
+        }, # column
+        "pktcSigDevToneFourthFreqValue" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.33.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "4000"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "4000"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This MIB object represents the value of the fourth
+frequency of a tone type.  A value of zero implies
+absence of the referenced frequency.""",
+        }, # column
+        "pktcSigDevToneFreqMode" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.33.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "firstModulatedBySecond" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "summation" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This MIB object provides directive on the
+modulation or summation of the frequencies
+involved in the tone.
+
+It is to be noted that while summation can
+be done without any constraint on the number
+of frequencies, the modulation (amplitude)
+holds good only when there are two frequencies
+(first and second).
+
+Thus:
+  - If the mode is set to a value of
+    'firstModulatedBySecond(1)', the first frequency
+    MUST be modulated by the second, and the remaining
+    frequencies (third and fourth) ignored.  The
+    percentage of amplitude modulation to be applied
+    is defined by the MIB object
+    pktcSigDevToneFreqAmpModePrtg.
+
+  - If the mode is set to a value of
+    'summation(2)', all the frequencies MUST be
+    summed without any modulation.""",
+        }, # column
+        "pktcSigDevToneFreqAmpModePrtg" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.33.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "100"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "100"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This MIB object represents the percentage of amplitude
+modulation applied to the second frequency
+when the MIB object pktcSigDevToneFreqMode is
+set to a value of 'firstModulatedBySecond (1)'.
+
+If the MIB object pktcSigDevToneFreqMode is set to
+value of 'summation (2)', then this MIB object MUST be
+ignored.""",
+        }, # column
+        "pktcSigDevToneDbLevel" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.33.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "parent module" : {
+                        "name" : "PKTC-IETF-SIG-MIB",
+                        "type" : "TenthdBm",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "-250",
+                        "max" : "-110"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-250",
+                        "max" : "-110"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "default" : "-120",
+            "units" : "1/10 of a dBm",
+            "description" :
+                """This MIB object contains the decibel level for each
+analog signal (tone) that is locally generated
+(versus in-band supervisory tones) and sourced to
+the a-b terminals (TE connection point).  Each tone
+in itself may consist of multiple frequencies, as
+defined by the MIB table pktcSigDevMultiFreqToneTable.
+
+This MIB object reflects the desired level at
+the Telco (POTS) a-b (T/R) terminals, including the
+effect of any MTA receiver gain (loss).  This is required
+so that locally generated tones are consistent with
+remotely generated in-band tones at the a-b terminals,
+consistent with user expectations.
+
+This MIB object must be set for each tone.
+When tones are formed by combining multi-frequencies,
+the level of each frequency shall be set so as to result
+in the tone level specified in this object at the a-b
+(T/R) terminals.
+
+The wide range of levels for this Object is required
+to provide signal-generator levels across the wide
+range of gains (losses) -- but does not imply the entire
+range is to be achievable given the range of gains (losses)
+in the MTA.""",
+        }, # column
+        "pktcSigDevToneFreqOnDuration" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.33.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "5000"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "5000"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "milliseconds",
+            "description" :
+                """This MIB object represents the duration for which the
+frequency reference corresponding to the tone type
+is turned on.""",
+        }, # column
+        "pktcSigDevToneFreqOffDuration" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.33.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "5000"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "5000"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "milliseconds",
+            "description" :
+                """This MIB object represents the duration for which the
+
+
+
+frequency reference corresponding to the tone type
+is turned off.""",
+        }, # column
+        "pktcSigDevToneFreqRepeatCount" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.33.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "5000"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "5000"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This MIB object indicates the number of times
+to repeat the cadence cycle represented by the
+on/off durations (refer to the MIB objects
+pktcSigDevToneFreqOnDuration and
+pktcSigDevToneFreqOffDuration).
+
+Setting this object may result in a tone duration that is
+longer or shorter than the overall signal duration
+specified by the time out (TO) object for the
+corresponding tone type.  If the value of this MIB
+Object indicates a longer duration than that
+specified by the TO, the latter overrules the former,
+and the desired tone duration will be truncated according
+to the TO.
+
+However, if the repeat count results in a shorter
+tone duration than the signal duration specified by
+the TO, the tone duration defined by the repeat count
+takes precedence over the TO and will end the signal
+event.  In this case, the TO represents a time not to
+be exceeded for the signal.  It is recommended, to
+ensure proper telephony signaling, that the TO
+duration setting should always be longer than the
+desired repeat count-time duration.  A value of zero
+means the tone sequence is to be played once but not
+repeated.""",
+        }, # column
+        "pktcSigDevCidDelayAfterLR" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.34",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "300",
+                        "max" : "800"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "300",
+                        "max" : "800"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "400",
+            "units" : "Milliseconds",
+            "description" :
+                """This object specifies the delay between the end of the
+Line Reversal and the start of the FSK or DTMF signal.
+This MIB object is used only when pktcSigDevCidMode is
+set to a value of 'lrETS'.  This timing has a range of
+300 to 800 ms.
+
+
+
+The following table defines the default values
+for this MIB object, depending on the signal type
+(pktcSigDevCidMode), and MUST be followed:
+
+Value of pktcSigDevCidMode       Default value
+
+duringringingETS               any value  (not used)
+dtAsETS                        any value  (not used)
+rpAsETS                        any value  (not used)
+lrAsETS                        any value  (not used)
+lrETS                          400
+
+An attempt to set this object while the value of
+pktcSigDevCidMode is not set to a value of 'lrETS' will
+result in an 'inconsistentValue' error.
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+        }, # scalar
+        "pktcSigDevCidDtmfStartCode" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.35",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PKTC-IETF-SIG-MIB", "name" : "DtmfCode"},
+            },
+            "access" : "readwrite",
+            "default" : "dtmfcodeA",
+            "description" :
+                """This object identifies optional start codes used when
+the MIB object pktcSigDevCidSigProtocol is set
+to a value of 'dtmf(2)'.
+
+Different countries define different caller id signaling
+codes to support caller identification.  When Dual-Tone
+Multi-Frequency (DTMF) is used, the caller id digits are
+preceded by a 'start code' digit, followed by the digit
+transmission sequence <S1>...<Sn> (where Sx represents
+the digits 0-9), and terminated by the 'end code' digit.
+
+For example,
+  <A><S1>...<Sn> <D><S1>...<Sn> <B><S1>...<Sn> <C>.
+The start code for calling number delivery may be DTMF
+'A' or 'D'.  The start code for redirecting a number may be
+DTMF 'D'.  The DTMF code 'B' may be sent by the network
+as a start code for the transfer of information values,
+through which special events can be indicated to the
+user.  In some countries, the '*' or '#' may be used
+instead of 'A', 'B', 'C', or 'D'.
+
+The value of this MIB object MUST NOT persist across MTA
+
+
+
+reboots.""",
+            "reference" :
+                """ETSI-EN-300-659-1 specification""",
+        }, # scalar
+        "pktcSigDevCidDtmfEndCode" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.36",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PKTC-IETF-SIG-MIB", "name" : "DtmfCode"},
+            },
+            "access" : "readwrite",
+            "default" : "dtmfcodeC",
+            "description" :
+                """This object identifies optional end codes used when the
+pktcSigDevCidSigProtocol is set to a value of
+'dtmf(2)'.
+
+Different countries define different caller id signaling
+protocols to support caller identification.  When
+Dual-Tone Multi-Frequency (DTMF) is used, the caller id
+digits are preceded by a 'start code' digit, followed by
+the digit transmission sequence <S1>...<Sn> (where Sx
+represents the digits 0-9), and terminated by the 'end
+code' digit.
+
+For example,
+  <A><S1>...<Sn> <D><S1>...<Sn> <B><S1>...<Sn> <C>.
+
+The DTMF code 'C' may be sent by the network as an
+end code for the transfer of information values, through
+which special events can be indicated to the user.  In
+some countries, the '*' or '#' may be used instead of
+'A', 'B', 'C', or 'D'.
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+            "reference" :
+                """ETSI-EN-300-659-1 specification""",
+        }, # scalar
+        "pktcSigDevVmwiSigProtocol" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.37",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PKTC-IETF-SIG-MIB", "name" : "PktcSubscriberSideSigProtocol"},
+            },
+            "access" : "readwrite",
+            "default" : "fsk",
+            "description" :
+                """This object identifies the subscriber line protocol used
+for signaling the information on Visual Message Waiting
+Indicator (VMWI).  Different countries define different
+VMWI signaling protocols to support VMWI service.
+
+
+
+Frequency shift keying (FSK) is most commonly used.
+DTMF is an alternative.
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+        }, # scalar
+        "pktcSigDevVmwiDelayAfterLR" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.38",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "0"
+                    },
+                    {
+                        "min" : "300",
+                        "max" : "800"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "800"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "400",
+            "units" : "Milliseconds",
+            "description" :
+                """This object specifies the delay between the end of the
+Line Reversal and the start of the FSK or DTMF signal.
+This object is only used when pktcSigDevVmwiMode is
+set to a value of 'lrETS'.
+This timing has a range of 300 to 800 ms.
+
+The following table defines the default values
+for this MIB object, depending on the signal type
+(pktcSigDevVmwiMode), and MUST be followed:
+
+Value of pktcSigDevVmwiMode       Default value
+
+duringringingETS                  any value  (not used)
+dtAsETS                           any value  (not used)
+rpAsETS                           any value  (not used)
+lrAsETS                           any value  (not used)
+lrETS                             400
+
+An attempt to set this object while the value of
+pktcSigDevVmwiMode is not 'lrETS' will result in an
+'inconsistentValue' error.
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+        }, # scalar
+        "pktcSigDevVmwiDtmfStartCode" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.39",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PKTC-IETF-SIG-MIB", "name" : "DtmfCode"},
+            },
+            "access" : "readwrite",
+            "default" : "dtmfcodeA",
+            "description" :
+                """This object identifies optional start codes used when
+
+
+
+the pktcSigDevVmwiSigProtocol is set to a value of
+'dtmf(2)'.  Different countries define different On Hook
+Data Transmission Protocol signaling codes to support
+VMWI.
+
+When Dual-Tone Multi-Frequency (DTMF) is used, the VMWI
+digits are preceded by a 'start code' digit, followed
+by the digit transmission sequence <S1>...<Sn> (where
+Sx represents the digits 0-9), and terminated by the 'end
+code' digit.
+
+For example,
+  <A><S1>...<Sn> <D><S1>...<Sn> <B><S1>...<Sn> <C>.
+
+The start code for redirecting VMWI may be DTMF 'D'
+The DTMF code 'B' may be sent by the network as a start
+code for the transfer of information values, through
+which special events can be indicated to the user.  In
+some countries, the '*' or '#' may be used instead of
+'A', 'B', 'C', or 'D'.
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+            "reference" :
+                """ETSI-EN-300-659-1 specification""",
+        }, # scalar
+        "pktcSigDevVmwiDtmfEndCode" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.40",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"PKTC-IETF-SIG-MIB", "name" : "DtmfCode"},
+            },
+            "access" : "readwrite",
+            "default" : "dtmfcodeC",
+            "description" :
+                """This object identifies an optional end code used when the
+pktcSigDevVmwiSigProtocol is set to a value of
+'dtmf(2)'.  Different countries define different on-hook
+Data Transmission Protocol signaling codes to support
+VMWI.
+
+When Dual-Tone Multi-Frequency (DTMF) is used, the VMWI
+digits are preceded by a 'start code' digit, followed
+by the digit transmission sequence <S1>...<Sn> (where
+Sx represents the digits 0-9), and terminated by the 'end
+code' digit.
+
+For example,
+  <A><S1>...<Sn> <D><S1>...<Sn> <B><S1>...<Sn> <C>.
+
+
+
+
+The DTMF code 'C' may be sent by the network as an end code
+for the transfer of information values, through which
+special events can be indicated to the user.  In some
+countries, the '*' or '#' may be used instead of 'A',
+'B', 'C', or 'D'.
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+            "reference" :
+                """ETSI-EN-300-659-1 specification""",
+        }, # scalar
+        "pktcSigDevrpAsDtsDuration" : {
+            "nodetype" : "scalar",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.1.41",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "0"
+                    },
+                    {
+                        "min" : "200",
+                        "max" : "500"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "500"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "250",
+            "units" : "Milliseconds",
+            "description" :
+                """ This object specifies the duration of the rpASDTS ring
+pulse prior to the start of the transmission of the
+FSK or DTMF containing the caller id information.  It is
+only used when pktcSigDevCidMode is set to a value of
+'rpAsETS'.
+
+The following table defines the default values
+for this MIB object, depending on the signal type
+(pktcSigDevCidMode), and MUST be followed:
+
+Value of pktcSigDevCidMode       Default value
+
+duringringingETS                 any value  (not used)
+dtAsETS                          any value  (not used)
+rpAsETS                          250
+lrAsETS                          any value  (not used)
+lrETS                            any value  (not used)
+
+An attempt to set this object while the value of
+pktcSigDevCidMode is not 'rpAsETS' will result in
+an 'inconsistentValue' error.
+
+The value of this MIB object MUST NOT persist across MTA
+reboots.""",
+            "reference" :
+                """ETSI-EN-300-659-1 Specification and Belgacom
+BGC_D_48_9811_30_09_EDOC version 3.3""",
+        }, # scalar
+        "pktcSigEndPntConfigObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2",
+        }, # node
+        "pktcSigEndPntConfigTable" : {
+            "nodetype" : "table",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1",
+            "status" : "current",
+            "description" :
+                """ This table describes the information pertaining to each
+endpoint of the MTA.  All entries in this table represent
+the provisioned endpoints provisioned with the information
+required by the MTA to maintain the NCS protocol
+communication with the CMS.  Each endpoint can be assigned
+to its own CMS.  If the specific endpoint does not have
+the corresponding CMS information in this table, the
+endpoint is considered as not provisioned with voice
+services.  Objects in this table do not persist across
+MTA reboots.""",
+        }, # table
+        "pktcSigEndPntConfigEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "ifIndex",
+            ],
+            "description" :
+                """Each entry in the pktcSigEndPntConfigTable represents
+required signaling parameters for the specific endpoint
+provisioned with voice services.  The conceptual rows MUST
+NOT persist across MTA reboots.""",
+        }, # row
+        "pktcSigEndPntConfigCallAgentId" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "OctetString",
+                    "parent module" : {
+                        "name" : "SNMP-FRAMEWORK-MIB",
+                        "type" : "SnmpAdminString",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "3",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "3",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """ This object contains a string indicating the call agent
+name (e.g., ca@example.com).  The call agent name, after
+the character '@', MUST be a fully qualified domain name
+(FQDN) and MUST have a corresponding pktcMtaDevCmsFqdn
+entry in the pktcMtaDevCmsTable.  The object
+pktcMtaDevCmsFqdn is defined in the PacketCable MIBMTA
+Specification.  For each particular endpoint, the MTA MUST
+use the current value of this object to communicate with
+the corresponding CMS.  The MTA MUST update this object
+with the value of the 'Notified Entity' parameter of the
+NCS message.  Because of the high importance of this object
+to the ability of the MTA to maintain reliable NCS
+communication with the CMS, it is highly recommended not
+to change this object's value using SNMP during normal
+operation.""",
+        }, # column
+        "pktcSigEndPntConfigCallAgentUdpPort" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "parent module" : {
+                        "name" : "INET-ADDRESS-MIB",
+                        "type" : "InetPortNumber",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "1025",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1025",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "2727",
+            "description" :
+                """ This object contains the current value of the User
+Datagram Protocol (UDP) receive port on which the
+call agent will receive NCS from the endpoint.
+For each particular endpoint, the MTA MUST use the current
+value of this object to communicate with the corresponding
+CMS.  The MTA MUST update this object with the value of the
+'Notified Entity' parameter of the NCS message.  If the
+Notified Entity parameter does not contain a CallAgent
+port, the MTA MUST update this object with the default
+value of 2727.  Because of the high importance of this
+object to the ability of the MTA to maintain reliable NCS
+communication with the CMS, it is highly recommended not
+to change this object's value using SNMP during normal
+operation.""",
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # column
+        "pktcSigEndPntConfigPartialDialTO" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "16",
+            "units" : "seconds",
+            "description" :
+                """This object contains the value of the partial dial
+time out.
+The time out (TO) elements are intended to limit the time a
+tone or frequency is generated.  When this MIB object is set
+to a value of '0', the MTA MUST NOT generate the
+corresponding frequency or tone, regardless of the
+definitions pertaining to frequency, tone duration, or
+cadence.""",
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # column
+        "pktcSigEndPntConfigCriticalDialTO" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "4",
+            "units" : "seconds",
+            "description" :
+                """This object contains the value of the critical
+dial time out.
+The time out (TO) elements are intended to limit the time a
+tone or frequency is generated.  When this MIB object is set
+to a value of '0', the MTA MUST NOT generate the
+corresponding frequency or tone, regardless of the
+definitions pertaining to frequency, tone duration, or
+cadence.""",
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # column
+        "pktcSigEndPntConfigBusyToneTO" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "30",
+            "units" : "seconds",
+            "description" :
+                """ This object contains the default time out value for busy
+tone.  The MTA MUST NOT update this object with the
+value provided in the NCS message (if present).  If
+the value of the object is modified by the SNMP Management
+Station, the MTA MUST use the new value as a default only
+for a new signal requested by the NCS message.
+The time out (TO) elements are intended to limit the time
+a tone or frequency is generated.  When this MIB object is
+set to a value of '0', the MTA MUST NOT generate the
+corresponding frequency or tone, regardless of the
+definitions pertaining to frequency, tone duration, or
+cadence.""",
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # column
+        "pktcSigEndPntConfigDialToneTO" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "16",
+            "units" : "seconds",
+            "description" :
+                """ This object contains the default time out value for dial
+tone.  The MTA MUST NOT update this object with the
+value provided in the NCS message (if present).  If
+
+
+
+the value of the object is modified by the SNMP Management
+Station, the MTA MUST use the new value as a default only
+for a new signal requested by the NCS message.
+The time out (TO) elements are intended to limit the time
+a tone or frequency is generated.  When this MIB object is
+set to a value of '0', the MTA MUST NOT generate the
+corresponding frequency or tone, regardless of the
+definitions pertaining to frequency, tone duration, or
+cadence.""",
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # column
+        "pktcSigEndPntConfigMessageWaitingTO" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "16",
+            "units" : "seconds",
+            "description" :
+                """ This object contains the default time out value for message
+waiting indicator.  The MTA MUST NOT update this object
+with the value provided in the NCS message (if
+present).  If the value of the object is modified by the
+SNMP Manager application, the MTA MUST use the new value
+as a default only for a new signal requested by the NCS
+message.
+The time out (TO) elements are intended to limit the time
+a tone or frequency is generated.  When this MIB object is
+set to a value of '0', the MTA MUST NOT generate the
+corresponding frequency or tone, regardless of the
+definitions pertaining to frequency, tone duration, or
+cadence.""",
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # column
+        "pktcSigEndPntConfigOffHookWarnToneTO" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "seconds",
+            "description" :
+                """ This object contains the default time out value for the
+off-hook warning tone.  The MTA MUST NOT update this object
+with the value provided in the NCS message (if present).  If
+the value of the object is modified by the SNMP Manager
+
+
+
+application, the MTA MUST use the new value as a default
+only for a new signal requested by the NCS message.  The
+time out (TO) elements are intended to limit the time a tone
+or frequency is generated.  When this MIB object is set to a
+value of '0', the MTA MUST NOT generate the corresponding
+frequency or tone, regardless of the definitions pertaining
+to frequency, tone duration, or cadence.""",
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # column
+        "pktcSigEndPntConfigRingingTO" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "180",
+            "units" : "seconds",
+            "description" :
+                """ This object contains the default time out value for
+ringing.  The MTA MUST NOT update this object with the
+value provided in the NCS message (if present).  If
+the value of the object is modified by the SNMP Management
+Station, the MTA MUST use the new value as a default only
+for a new signal requested by the NCS message.
+The time out (TO) elements are intended to limit the time
+a tone or frequency is generated.  When this MIB object is
+set to a value of '0', the MTA MUST NOT generate the
+corresponding frequency or tone, regardless of the
+definitions pertaining to frequency, tone duration, or
+cadence.""",
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # column
+        "pktcSigEndPntConfigRingBackTO" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "180",
+            "units" : "seconds",
+            "description" :
+                """ This object contains the default time out value for ring
+back.  The MTA MUST NOT update this object with the
+value provided in the NCS message (if present).  If
+the value of the object is modified by the SNMP Management
+Station, the MTA MUST use the new value as a default only
+for a new signal requested by the NCS message.
+The time out (TO) elements are intended to limit the time
+
+
+
+a tone or frequency is generated.  When this MIB object is
+set to a value of '0', the MTA MUST NOT generate the
+corresponding frequency or tone, regardless of the
+definitions pertaining to frequency, tone duration, or
+cadence.""",
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # column
+        "pktcSigEndPntConfigReorderToneTO" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "30",
+            "units" : "seconds",
+            "description" :
+                """ This object contains the default time out value for reorder
+tone.  The MTA MUST NOT update this object with the
+value provided in the NCS message (if present).  If
+the value of the object is modified by the SNMP Management
+Station, the MTA MUST use the new value as a default only
+for a new signal requested by the NCS message.
+The time out (TO) elements are intended to limit the time
+a tone or frequency is generated.  When this MIB object is
+set to a value of '0', the MTA MUST NOT generate the
+corresponding frequency or tone, regardless of the
+definitions pertaining to frequency, tone duration, or
+cadence.""",
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # column
+        "pktcSigEndPntConfigStutterDialToneTO" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "16",
+            "units" : "seconds",
+            "description" :
+                """ This object contains the default time out value for stutter
+dial tone.  The MTA MUST NOT update this object with the
+value provided in the NCS message (if present).  If
+the value of the object is modified by the SNMP Management
+Station, the MTA MUST use the new value as a default only
+for a new signal requested by the NCS message.
+The time out (TO) elements are intended to limit the time
+a tone or frequency is generated.  When this MIB object is
+set to a value of '0', the MTA MUST NOT generate the
+
+
+
+corresponding frequency or tone, regardless of the
+definitions pertaining to frequency, tone duration, or
+cadence.""",
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # column
+        "pktcSigEndPntConfigTSMax" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "20",
+            "description" :
+                """This MIB object is used as part of an NCS
+retransmission algorithm.  Prior to any retransmission,
+the MTA must check to make sure that the time elapsed
+since the sending of the initial datagram does not
+exceed the value specified by this MIB object.  If more
+than Tsmax time has elapsed, then the retransmissions
+MUST cease.
+
+Refer to the MIB object pktcSigEndPntConfigThist for
+information on when the endpoint becomes disconnected.""",
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # column
+        "pktcSigEndPntConfigMax1" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "5",
+            "description" :
+                """This object contains the suspicious error threshold for
+signaling messages.  The pktcSigEndPntConfigMax1 object
+indicates the retransmission threshold at which the MTA MAY
+actively query the domain name server (DNS) in order to
+detect the possible change of call agent interfaces.""",
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # column
+        "pktcSigEndPntConfigMax2" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "7",
+            "description" :
+                """This object contains the disconnect error threshold for
+signaling messages.  The pktcSigEndPntConfigMax2 object
+indicates the retransmission threshold at which the MTA
+SHOULD contact the DNS one more time to see if any other
+interfaces to the call agent have become available.""",
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # column
+        "pktcSigEndPntConfigMax1QEnable" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "default" : "true",
+            "description" :
+                """This object enables/disables the Max1 domain name server
+(DNS) query operation when the pktcSigEndPntConfigMax1
+threshold has been reached.
+A value of true(1) indicates enabling, and a value of
+false(2) indicates disabling.""",
+        }, # column
+        "pktcSigEndPntConfigMax2QEnable" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.17",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "default" : "true",
+            "description" :
+                """This object enables/disables the Max2 domain name server
+(DNS) query operation when the pktcSigEndPntConfigMax2
+threshold has been reached.
+A value of true(1) indicates enabling, and a value of
+false(2) indicates disabling.""",
+        }, # column
+        "pktcSigEndPntConfigMWD" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.18",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "600",
+            "units" : "seconds",
+            "description" :
+                """Maximum Waiting Delay (MWD) contains the maximum number of
+seconds an MTA waits, after powering on, before initiating
+the restart procedure with the call agent.""",
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # column
+        "pktcSigEndPntConfigTdinit" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.19",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "15",
+            "units" : "seconds",
+            "description" :
+                """This MIB object represents the 'disconnected' initial
+waiting delay within the context of an MTA's 'disconnected
+procedure'.  The 'disconnected procedure' is initiated when
+an endpoint becomes 'disconnected' while attempting to
+communicate with a call agent.
+
+The 'disconnected timer' associated with the 'disconnected
+Procedure' is initialized to a random value, uniformly
+distributed between zero and the value contained in this
+MIB object.
+
+For more information on the usage of this timer, please
+refer to the PacketCable NCS Specification.""",
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # column
+        "pktcSigEndPntConfigTdmin" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.20",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "15",
+            "units" : "seconds",
+            "description" :
+                """This MIB object represents the 'disconnected' minimum
+waiting delay within the context of an MTA's
+'disconnected procedure', specifically when local user
+activity is detected.
+The 'disconnected procedure' is initiated when
+an endpoint becomes 'disconnected' while attempting to
+communicate with a call agent.
+For more information on the usage of this timer, please
+refer to the PacketCable NCS Specification.""",
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # column
+        "pktcSigEndPntConfigTdmax" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.21",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "600",
+            "units" : "seconds",
+            "description" :
+                """ This object contains the maximum number of seconds the MTA
+waits, after a disconnect, before initiating the
+disconnected procedure with the call agent.
+ """,
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # column
+        "pktcSigEndPntConfigRtoMax" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.22",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "4",
+            "units" : "seconds",
+            "description" :
+                """This object specifies the maximum number of seconds the MTA
+waits for a response to an NCS message before initiating
+a retransmission.""",
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # column
+        "pktcSigEndPntConfigRtoInit" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.23",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "200",
+            "units" : "milliseconds",
+            "description" :
+                """ This object contains the initial number of seconds for the
+retransmission timer.""",
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # column
+        "pktcSigEndPntConfigLongDurationKeepAlive" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.24",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "60",
+            "units" : "minutes",
+            "description" :
+                """ Specifies a time out value, in minutes, for sending long
+duration call notification messages.""",
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # column
+        "pktcSigEndPntConfigThist" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.25",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "30",
+            "units" : "seconds",
+            "description" :
+                """ Time out period, in seconds, before no response is declared.""",
+            "reference" :
+                """PacketCable NCS Specification""",
+        }, # column
+        "pktcSigEndPntConfigStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.26",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """ This object contains the Row Status associated with the
+pktcSigEndPntConfigTable.  There are no restrictions or
+dependencies amidst the columnar objects before this
+row can be activated or for modifications of the
+columnar objects when this object is set to a
+value of 'active(1).""",
+        }, # column
+        "pktcSigEndPntConfigCallWaitingMaxRep" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.27",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "10"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "10"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "1",
+            "description" :
+                """ This object contains the default value of the maximum
+number of repetitions of the Call Waiting tone that the
+MTA will play from a single CMS request.  The MTA MUST NOT
+update this object with the information provided in the
+NCS message (if present).  If the value of the object is
+modified by the SNMP Manager application, the MTA MUST use
+the new value as a default only for a new signal
+requested by the NCS message.""",
+        }, # column
+        "pktcSigEndPntConfigCallWaitingDelay" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.28",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "100"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "100"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "10",
+            "units" : "seconds",
+            "description" :
+                """ This object contains the delay between repetitions of the
+Call Waiting tone that the MTA will play from a single CMS
+request.""",
+        }, # column
+        "pktcSigEndPntStatusCallIpAddressType" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.29",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddressType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """ This object contains the type of Internet address contained
+in the MIB object 'pktcSigEndPntStatusCallIpAddress'.
+
+Since pktcSigEndPntStatusCallIpAddress is expected to
+contain an IP address, a value of dns(16) is disallowed.""",
+        }, # column
+        "pktcSigEndPntStatusCallIpAddress" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.30",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddress"},
+            },
+            "access" : "readonly",
+            "description" :
+                """ This MIB object contains the chosen IP address of the CMS
+currently being used for the corresponding endpoint.
+
+The device determines the IP address by using DNS to
+resolve the IP address of the CMS from the FQDN stored in
+the MIB object 'pktcSigEndPntConfigCallAgentId'.  The
+processes are outlined in the PacketCable NCS and Security
+specifications, and MUST be followed by the MTA.
+
+The IP address type contained in this MIB object is
+indicated by pktcSigEndPntStatusCallIpAddressType.""",
+            "reference" :
+                """PacketCable NCS Specification;
+PacketCable Security specification, [PKT-SP-SEC].""",
+        }, # column
+        "pktcSigEndPntStatusError" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.31",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "operational" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "noSecurityAssociation" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "disconnected" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """ This object contains the error status for this interface.
+The operational status indicates that all operations
+necessary to put the line in service have occurred, and the
+CMS has acknowledged the Restart In Progress (RSIP)
+message successfully.  If pktcMtaDevCmsIpsecCtrl is enabled
+for the associated call agent, the noSecurityAssociation
+status indicates that no Security Association (SA) yet
+exists for this endpoint.  If pktcMtaDevCmsIpsecCtrl is
+disabled for the associated call agent, the
+noSecurityAssociation status is not applicable and should
+not be used by the MTA.  The disconnected status indicates
+one of the following two:
+If pktcMtaDevCmsIpsecCtrl is disabled, then no security
+association is involved with this endpoint.  The NCS
+signaling software is in process of establishing the NCS
+signaling link via an RSIP exchange.
+Otherwise, when pktcMtaDevCmsIpsecCtrl is enabled,
+security Association has been established, and the NCS
+signaling software is in process of establishing the NCS
+signaling link via an RSIP exchange.""",
+        }, # column
+        "pktcSigEndPntConfigMinHookFlash" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.32",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "20",
+                        "max" : "1550"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "20",
+                        "max" : "1550"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "default" : "300",
+            "units" : "Milliseconds",
+            "description" :
+                """ This is the minimum time a line needs to be on-hook for a
+valid hook flash.  The value of this object MUST be
+greater than the value of
+pktcSigEndPntConfigPulseDialMaxBreakTime.  The value of
+pktcSigEndPntConfigMinHookFlash MUST be less than
+pktcSigEndPntConfigMaxHookFlash.  This object MUST only be
+set via the MTA configuration during the provisioning
+process.
+   Furthermore, given the possibility for the 'pulse dial'
+   and 'hook flash' to overlap, the value of this object
+   MUST be greater than the value contained by the MIB
+   Object 'pktcSigEndPntConfigPulseDialMaxMakeTime'.""",
+        }, # column
+        "pktcSigEndPntConfigMaxHookFlash" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.33",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "20",
+                        "max" : "1550"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "20",
+                        "max" : "1550"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "default" : "800",
+            "units" : "Milliseconds",
+            "description" :
+                """ This is the maximum time a line needs to be on-hook for a
+valid hook flash.  The value of
+pktcSigEndPntConfigMaxHookFlash MUST be greater than
+pktcSigEndPntConfigMinHookFlash.  This object MUST only be
+set via the MTA configuration during the provisioning
+process.""",
+        }, # column
+        "pktcSigEndPntConfigPulseDialInterdigitTime" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.34",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "100",
+                        "max" : "1500"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "100",
+                        "max" : "1500"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "default" : "100",
+            "units" : "Milliseconds",
+            "description" :
+                """ This is the pulse dial inter-digit time out.  This object
+MUST only be set via the MTA configuration during the
+provisioning process.""",
+        }, # column
+        "pktcSigEndPntConfigPulseDialMinMakeTime" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.35",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "20",
+                        "max" : "200"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "20",
+                        "max" : "200"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "default" : "25",
+            "units" : "Milliseconds",
+            "description" :
+                """ This is the minimum make pulse width for the dial pulse.
+The value of pktcSigEndPntConfigPulseDialMinMakeTime MUST
+be less than pktcSigEndPntConfigPulseDialMaxMakeTime.  This
+object MUST only be set via the MTA configuration during
+the provisioning process.""",
+        }, # column
+        "pktcSigEndPntConfigPulseDialMaxMakeTime" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.36",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "20",
+                        "max" : "200"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "20",
+                        "max" : "200"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "default" : "55",
+            "units" : "Milliseconds",
+            "description" :
+                """ This is the maximum make pulse width for the dial pulse.
+
+
+
+The value of pktcSigEndPntConfigPulseDialMaxMakeTime MUST
+be greater than pktcSigEndPntConfigPulseDialMinMakeTime.
+This object MUST only be provided via the configuration
+file during the provisioning process.
+Furthermore, given the possibility for the 'pulse dial'
+and 'hook flash' to overlap, the value of this object MUST
+be less than the value contained by the MIB object
+pktcSigEndPntConfigMinHookFlash.""",
+        }, # column
+        "pktcSigEndPntConfigPulseDialMinBreakTime" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.37",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "20",
+                        "max" : "200"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "20",
+                        "max" : "200"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "default" : "45",
+            "units" : "Milliseconds",
+            "description" :
+                """ This is the minimum break pulse width for the dial pulse.
+The value of pktcSigEndPntConfigPulseDialMinBreakTime MUST
+be less than pktcSigEndPntConfigPulseDialMaxBreakTime.
+This object must only be provided via the configuration
+file during the provisioning process.""",
+        }, # column
+        "pktcSigEndPntConfigPulseDialMaxBreakTime" : {
+            "nodetype" : "column",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.1.2.1.1.38",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "20",
+                        "max" : "200"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "20",
+                        "max" : "200"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "default" : "75",
+            "units" : "Milliseconds",
+            "description" :
+                """ This is the maximum break pulse width for the dial pulse.
+The value of pktcSigEndPntConfigPulseDialMaxBreakTime MUST
+be greater than pktcSigEndPntConfigPulseDialMinBreakTime.
+This object MUST only be provided via the configuration
+file during the provisioning process.""",
+        }, # column
+        "pktcSigConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.2",
+        }, # node
+        "pktcSigCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.2.1",
+        }, # node
+        "pktcSigGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.2.2",
+        }, # node
+    }, # nodes
+
+    "groups" : {
+        "pktcSigDeviceGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.2.2.1",
+            "status" : "current",
+            "members" : {
+                "pktcSigDevCodecMax" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevEchoCancellation" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevSilenceSuppression" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevR0Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevR1Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevR2Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevR3Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevR4Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevR5Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevR6Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevR7Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevRgCadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevRsCadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDefCallSigDscp" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDefMediaStreamDscp" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevVmwiMode" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigCapabilityType" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigCapabilityVersion" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigCapabilityVendorExt" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDefNcsReceiveUdpPort" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+            }, # members
+            "description" :
+                """Group of MIB objects containing signaling configuration
+information that is applicable per-device.""",
+        }, # group
+        "pktcSigEndpointGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.2.2.2",
+            "status" : "current",
+            "members" : {
+                "pktcSigEndPntConfigCallAgentId" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigCallAgentUdpPort" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigPartialDialTO" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigCriticalDialTO" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigBusyToneTO" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigDialToneTO" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigMessageWaitingTO" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigOffHookWarnToneTO" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigRingingTO" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigRingBackTO" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigReorderToneTO" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigStutterDialToneTO" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigTSMax" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigMax1" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigMax2" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigMax1QEnable" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigMax2QEnable" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigMWD" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigTdinit" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigTdmin" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigTdmax" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigRtoMax" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigRtoInit" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigLongDurationKeepAlive" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigThist" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigStatus" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigCallWaitingMaxRep" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigCallWaitingDelay" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntStatusCallIpAddressType" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntStatusCallIpAddress" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntStatusError" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+            }, # members
+            "description" :
+                """Group of MIB objects containing signaling configuration
+information that is applicable per-endpoint.""",
+        }, # group
+        "pktcInternationalGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.2.2.3",
+            "status" : "current",
+            "members" : {
+                "pktcSigEndPntConfigMinHookFlash" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigMaxHookFlash" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigPulseDialInterdigitTime" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigPulseDialMinMakeTime" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigPulseDialMaxMakeTime" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigPulseDialMinBreakTime" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndPntConfigPulseDialMaxBreakTime" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevRingCadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevCidSigProtocol" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevCidDelayAfterLR" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevCidDtmfStartCode" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevCidDtmfEndCode" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevVmwiSigProtocol" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevVmwiDelayAfterLR" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevVmwiDtmfStartCode" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevVmwiDtmfEndCode" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevrpAsDtsDuration" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevCidMode" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevCidAfterRing" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevCidAfterDTAS" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevCidAfterRPAS" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevRingAfterCID" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevCidDTASAfterLR" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevVmwiMode" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevVmwiAfterDTAS" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevVmwiAfterRPAS" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevVmwiDTASAfterLR" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigPowerRingFrequency" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigPulseSignalFrequency" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigPulseSignalDbLevel" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigPulseSignalDuration" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigPulseSignalPulseInterval" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigPulseSignalRepeatCount" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevToneDbLevel" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevToneFreqCounter" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevToneWholeToneRepeatCount" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevToneSteady" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevToneFirstFreqValue" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevToneSecondFreqValue" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevToneThirdFreqValue" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevToneFourthFreqValue" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevToneFreqMode" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevToneFreqAmpModePrtg" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevToneFreqOnDuration" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevToneFreqOffDuration" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevToneFreqRepeatCount" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+            }, # members
+            "description" :
+                """ Group of objects that extend the behavior of existing
+objects to support operations in the widest possible set
+of international marketplaces.  Note that many of these
+objects represent a superset of behaviors described in
+other objects within this MIB module.""",
+        }, # group
+        "pktcLLinePackageGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.2.2.4",
+            "status" : "current",
+            "members" : {
+                "pktcSigDevR0Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevR1Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevR2Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevR3Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevR4Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevR5Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevR6Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevR7Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevRgCadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevRsCadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+            }, # members
+            "description" :
+                """Group of Objects to support the L line package.""",
+        }, # group
+        "pktcELinePackageGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.2.2.5",
+            "status" : "current",
+            "members" : {
+                "pktcSigDevR0Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevR1Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevR2Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevR3Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevR4Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevR5Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevR6Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevR7Cadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevRgCadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevRsCadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigPulseSignalFrequency" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigPulseSignalDbLevel" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigPulseSignalDuration" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigPulseSignalPulseInterval" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigPulseSignalRepeatCount" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigDevRingCadence" : {
+                    "nodetype" : "member",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+            }, # members
+            "description" :
+                """Group of Objects to support the E line package.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "pktcSigBasicCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "PKTC-IETF-SIG-MIB",
+            "oid" : "1.3.6.1.2.1.169.2.1.1",
+            "status" : "current",
+            "description" :
+                """ The compliance statement for MTAs that implement
+NCS signaling.""",
+            "requires" : {
+                "pktcSigDeviceGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcSigEndpointGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "PKTC-IETF-SIG-MIB"
+                },
+                "pktcInternationalGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "PKTC-IETF-SIG-MIB",
+                    "description" :
+                        """ This group is mandatory only for MTAs implementing
+international telephony features.""",
+                },
+                "pktcLLinePackageGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "PKTC-IETF-SIG-MIB",
+                    "description" :
+                        """ This group is mandatory only for MTAs implementing the L
+line package.""",
+                },
+                "pktcELinePackageGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "PKTC-IETF-SIG-MIB",
+                    "description" :
+                        """ This group is mandatory only for MTAs implementing the E
+Line Package.""",
+                },
+            }, # requires
+        }, # compliance
+    }, # compliances
+
+}