logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/MPLS-LDP-GENERIC-STD-MIB.dic

@@ -0,0 +1,445 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python MPLS-LDP-GENERIC-STD-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/MPLS-LDP-GENERIC-STD-MIB"
+
+MIB = {
+    "moduleName" : "MPLS-LDP-GENERIC-STD-MIB",
+
+    "MPLS-LDP-GENERIC-STD-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """Multiprotocol Label Switching (mpls)
+Working Group""",
+        "contact" : 
+            """Joan Cucchiara (jcucchiara@mindspring.com)
+Marconi Communications, Inc.
+
+Hans Sjostrand (hans@ipunplugged.com)
+ipUnplugged
+
+
+
+James V. Luciani (james_luciani@mindspring.com)
+Marconi Communications, Inc.
+
+Working Group Chairs:
+George Swallow,   email: swallow@cisco.com
+Loa Andersson,    email: loa@pi.se
+
+MPLS Working Group, email: mpls@uu.net""",
+        "description" :
+            """Copyright (C) The Internet Society (year). The
+initial version of this MIB module was published
+in RFC 3815. For full legal notices see the RFC
+itself or see:
+http://www.ietf.org/copyrights/ianamib.html
+
+This MIB contains managed object definitions for
+configuring and monitoring the Multiprotocol Label
+Switching (MPLS), Label Distribution Protocol (LDP),
+utilizing ethernet as the Layer 2 media.""",
+        "revisions" : (
+            {
+                "date" : "2004-06-03 00:00",
+                "description" :
+                    """Initial version published as part of RFC 3815.""",
+            },
+        ),
+        "identity node" : "mplsLdpGenericStdMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "Unsigned32"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "SNMPv2-TC", "name" : "RowStatus"},
+        {"module" : "SNMPv2-TC", "name" : "StorageType"},
+        {"module" : "IF-MIB", "name" : "InterfaceIndexOrZero"},
+        {"module" : "MPLS-TC-STD-MIB", "name" : "mplsStdMIB"},
+        {"module" : "MPLS-LDP-STD-MIB", "name" : "mplsLdpEntityLdpId"},
+        {"module" : "MPLS-LDP-STD-MIB", "name" : "mplsLdpEntityIndex"},
+    ),
+
+    "nodes" : {
+        "mplsLdpGenericStdMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-GENERIC-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.7",
+            "status" : "current",
+        }, # node
+        "mplsLdpGenericObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-GENERIC-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.7.1",
+        }, # node
+        "mplsLdpEntityGenericObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-GENERIC-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.7.1.1",
+        }, # node
+        "mplsLdpEntityGenericLRTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-LDP-GENERIC-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.7.1.1.1",
+            "status" : "current",
+            "description" :
+                """The MPLS LDP Entity Generic Label Range (LR)
+Table.
+
+The purpose of this table is to provide a mechanism
+for configurating a contiguous range of generic labels,
+or a 'label range' for LDP Entities.
+
+LDP Entities which use Generic Labels must have at least
+one entry in this table.  In other words, this table
+'extends' the mpldLdpEntityTable for Generic Labels.""",
+        }, # table
+        "mplsLdpEntityGenericLREntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-LDP-GENERIC-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.7.1.1.1.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "mplsLdpEntityLdpId",
+                "mplsLdpEntityIndex",
+                "mplsLdpEntityGenericLRMin",
+                "mplsLdpEntityGenericLRMax",
+            ],
+            "description" :
+                """A row in the LDP Entity Generic Label
+Range (LR) Table.  One entry in this table contains
+information on a single range of labels
+represented by the configured Upper and Lower
+Bounds pairs.  NOTE: there is NO corresponding
+LDP message which relates to the information
+in this table, however, this table does provide
+a way for a user to 'reserve' a generic label
+range.
+
+NOTE:  The ranges for a specific LDP Entity
+are UNIQUE and non-overlapping.
+
+A row will not be created unless a unique and
+non-overlapping range is specified.""",
+        }, # row
+        "mplsLdpEntityGenericLRMin" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-GENERIC-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.7.1.1.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "1048575"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "1048575"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """The minimum label configured for this range.""",
+        }, # column
+        "mplsLdpEntityGenericLRMax" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-GENERIC-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.7.1.1.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "1048575"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "1048575"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """The maximum label configured for this range.""",
+        }, # column
+        "mplsLdpEntityGenericLabelSpace" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-GENERIC-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.7.1.1.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "perPlatform" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "perInterface" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "perPlatform",
+            "description" :
+                """This value of this object is perPlatform(1), then
+this means that the label space type is
+per platform.
+
+If this object is perInterface(2), then this
+means that the label space type is per Interface.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 2.2.1,
+Label Spaces.""",
+        }, # column
+        "mplsLdpEntityGenericIfIndexOrZero" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-GENERIC-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.7.1.1.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "InterfaceIndexOrZero"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This value represents either the InterfaceIndex of
+the 'ifLayer' where these Generic Label would be created,
+
+
+or 0 (zero).  The value of zero means that the
+InterfaceIndex is not known.
+
+However, if the InterfaceIndex is known,
+then it must be represented by this value.
+
+If an InterfaceIndex becomes known, then the
+network management entity (e.g., SNMP agent) responsible
+for this object MUST change the value from 0 (zero) to the
+value of the InterfaceIndex.""",
+        }, # column
+        "mplsLdpEntityGenericLRStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-GENERIC-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.7.1.1.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "default" : "nonVolatile",
+            "description" :
+                """The storage type for this conceptual row.
+Conceptual rows having the value 'permanent(4)'
+need not allow write-access to any columnar
+objects in the row.""",
+        }, # column
+        "mplsLdpEntityGenericLRRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-GENERIC-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.7.1.1.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The status of this conceptual row.  All writable
+objects in this row may be modified at any time,
+however, as described in  detail in the section
+entitled, 'Changing Values After Session
+Establishment', and again described in the
+DESCRIPTION clause of the mplsLdpEntityAdminStatus object,
+if a session has been initiated with a Peer,
+changing objects in this table will
+wreak havoc with the session and interrupt traffic.
+To repeat again:  the recommended procedure is
+to set the mplsLdpEntityAdminStatus to
+down, thereby explicitly causing a
+session to be torn down. Then, change objects
+in this entry, then set the mplsLdpEntityAdminStatus
+to enable which enables a new session to be initiated.
+
+There must exist at least one entry in this
+table for every LDP Entity that has a
+generic label configured.""",
+        }, # column
+        "mplsLdpGenericConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-GENERIC-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.7.2",
+        }, # node
+        "mplsLdpGenericGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-GENERIC-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.7.2.1",
+        }, # node
+        "mplsLdpGenericCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-GENERIC-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.7.2.2",
+        }, # node
+    }, # nodes
+
+    "groups" : {
+        "mplsLdpGenericGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "MPLS-LDP-GENERIC-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.7.2.1.1",
+            "status" : "current",
+            "members" : {
+                "mplsLdpEntityGenericLabelSpace" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-GENERIC-STD-MIB"
+                },
+                "mplsLdpEntityGenericIfIndexOrZero" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-GENERIC-STD-MIB"
+                },
+                "mplsLdpEntityGenericLRStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-GENERIC-STD-MIB"
+                },
+                "mplsLdpEntityGenericLRRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-GENERIC-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Objects that apply to all MPLS LDP implementations
+using Generic Labels as the Layer 2.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "mplsLdpGenericModuleFullCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "MPLS-LDP-GENERIC-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.7.2.2.1",
+            "status" : "current",
+            "description" :
+                """The Module is implemented with support for
+read-create and read-write.  In other words,
+both monitoring and configuration
+are available when using this MODULE-COMPLIANCE.""",
+            "requires" : {
+                "mplsLdpGenericGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-LDP-GENERIC-STD-MIB"
+                },
+            }, # requires
+            "refinements" : {
+                "mplsLdpEntityGenericLRRowStatus" : {
+                    "module" : "MPLS-LDP-GENERIC-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "writesyntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "createAndGo" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                            "destroy" : {
+                                "nodetype" : "namednumber",
+                                "number" : "6"
+                            },
+                        },
+                    }, # writesyntax
+                    "description" :
+                        """Support for createAndWait and notInService is not required.""",
+                },
+            }, # refinements
+
+        }, # compliance
+        "mplsLdpGenericModuleReadOnlyCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "MPLS-LDP-GENERIC-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.7.2.2.2",
+            "status" : "current",
+            "description" :
+                """The Module is implemented with support for
+read-only.  In other words, only monitoring
+is available by implementing this MODULE-COMPLIANCE.""",
+            "requires" : {
+                "mplsLdpGenericGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-LDP-GENERIC-STD-MIB"
+                },
+            }, # requires
+            "refinements" : {
+                "mplsLdpEntityGenericLabelSpace" : {
+                    "module" : "MPLS-LDP-GENERIC-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityGenericIfIndexOrZero" : {
+                    "module" : "MPLS-LDP-GENERIC-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityGenericLRStorageType" : {
+                    "module" : "MPLS-LDP-GENERIC-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityGenericLRRowStatus" : {
+                    "module" : "MPLS-LDP-GENERIC-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required, and active is the
+only status that needs to be supported.""",
+                },
+            }, # refinements
+
+        }, # compliance
+    }, # compliances
+
+}

data/lib/mibs/ietf/MPLS-LDP-STD-MIB.dic

@@ -0,0 +1,3657 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python MPLS-LDP-STD-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/MPLS-LDP-STD-MIB"
+
+MIB = {
+    "moduleName" : "MPLS-LDP-STD-MIB",
+
+    "MPLS-LDP-STD-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """Multiprotocol Label Switching (mpls)
+Working Group""",
+        "contact" : 
+            """Joan Cucchiara (jcucchiara@mindspring.com)
+Marconi Communications, Inc.
+
+Hans Sjostrand (hans@ipunplugged.com)
+ipUnplugged
+
+James V. Luciani (james_luciani@mindspring.com)
+Marconi Communications, Inc.
+
+Working Group Chairs:
+George Swallow,   email: swallow@cisco.com
+Loa Andersson,    email: loa@pi.se
+
+MPLS Working Group, email: mpls@uu.net""",
+        "description" :
+            """Copyright (C) The Internet Society (2004). The
+initial version of this MIB module was published
+
+
+
+in RFC 3815. For full legal notices see the RFC
+itself or see:
+http://www.ietf.org/copyrights/ianamib.html
+
+This MIB contains managed object definitions for the
+'Multiprotocol Label Switching, Label Distribution
+Protocol, LDP' document.""",
+        "revisions" : (
+            {
+                "date" : "2004-06-03 00:00",
+                "description" :
+                    """Initial version published as part of RFC 3815.""",
+            },
+        ),
+        "identity node" : "mplsLdpStdMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "NOTIFICATION-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter32"},
+        {"module" : "SNMPv2-SMI", "name" : "Unsigned32"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "SNMPv2-CONF", "name" : "NOTIFICATION-GROUP"},
+        {"module" : "SNMPv2-TC", "name" : "RowStatus"},
+        {"module" : "SNMPv2-TC", "name" : "TimeInterval"},
+        {"module" : "SNMPv2-TC", "name" : "TruthValue"},
+        {"module" : "SNMPv2-TC", "name" : "TimeStamp"},
+        {"module" : "SNMPv2-TC", "name" : "StorageType"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetAddressPrefixLength"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetAddressType"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetAddress"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetPortNumber"},
+        {"module" : "DIFFSERV-MIB", "name" : "IndexInteger"},
+        {"module" : "DIFFSERV-MIB", "name" : "IndexIntegerNextFree"},
+        {"module" : "MPLS-TC-STD-MIB", "name" : "mplsStdMIB"},
+        {"module" : "MPLS-TC-STD-MIB", "name" : "MplsLabelDistributionMethod"},
+        {"module" : "MPLS-TC-STD-MIB", "name" : "MplsLdpIdentifier"},
+        {"module" : "MPLS-TC-STD-MIB", "name" : "MplsLdpLabelType"},
+        {"module" : "MPLS-TC-STD-MIB", "name" : "MplsLspType"},
+        {"module" : "MPLS-TC-STD-MIB", "name" : "MplsLsrIdentifier"},
+        {"module" : "MPLS-TC-STD-MIB", "name" : "MplsRetentionMode"},
+        {"module" : "MPLS-LSR-STD-MIB", "name" : "MplsIndexType"},
+    ),
+
+    "nodes" : {
+        "mplsLdpStdMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4",
+            "status" : "current",
+        }, # node
+        "mplsLdpNotifications" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.0",
+        }, # node
+        "mplsLdpObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1",
+        }, # node
+        "mplsLdpLsrObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.1",
+        }, # node
+        "mplsLdpLsrId" : {
+            "nodetype" : "scalar",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-TC-STD-MIB", "name" : "MplsLsrIdentifier"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The Label Switching Router's Identifier.""",
+        }, # scalar
+        "mplsLdpLsrLoopDetectionCapable" : {
+            "nodetype" : "scalar",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "none" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "other" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "hopCount" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "pathVector" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "hopCountAndPathVector" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """A indication of whether this
+Label Switching Router supports
+loop detection.
+
+none(1) -- Loop Detection is not supported
+           on this LSR.
+
+other(2) -- Loop Detection is supported but
+            by a method other than those
+            listed below.
+
+hopCount(3) -- Loop Detection is supported by
+               Hop Count only.
+
+pathVector(4) -- Loop Detection is supported by
+                 Path Vector only.
+
+hopCountAndPathVector(5) -- Loop Detection is
+                     supported by both Hop Count
+                     And Path Vector.
+
+Since Loop Detection is determined during
+Session Initialization, an individual session
+may not be running with loop detection.  This
+object simply gives an indication of whether or not the
+LSR has the ability to support Loop Detection and
+which types.""",
+        }, # scalar
+        "mplsLdpEntityObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2",
+        }, # node
+        "mplsLdpEntityLastChange" : {
+            "nodetype" : "scalar",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime at the time of the most
+recent addition or deletion of an entry
+to/from the mplsLdpEntityTable/mplsLdpEntityStatsTable, or
+the most recent change in value of any objects in the
+mplsLdpEntityTable.
+
+
+
+If no such changes have occurred since the last
+re-initialization of the local management subsystem,
+then this object contains a zero value.""",
+        }, # scalar
+        "mplsLdpEntityIndexNext" : {
+            "nodetype" : "scalar",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIFFSERV-MIB", "name" : "IndexIntegerNextFree"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object contains an appropriate value to
+be used for mplsLdpEntityIndex when creating
+entries in the mplsLdpEntityTable. The value
+0 indicates that no unassigned entries are
+available.""",
+        }, # scalar
+        "mplsLdpEntityTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3",
+            "status" : "current",
+            "description" :
+                """This table contains information about the
+MPLS Label Distribution Protocol Entities which
+exist on this Label Switching Router (LSR)
+or Label Edge Router (LER).""",
+        }, # table
+        "mplsLdpEntityEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "mplsLdpEntityLdpId",
+                "mplsLdpEntityIndex",
+            ],
+            "description" :
+                """An entry in this table represents an LDP entity.
+An entry can be created by a network administrator
+or by an SNMP agent as instructed by LDP.""",
+        }, # row
+        "mplsLdpEntityLdpId" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-TC-STD-MIB", "name" : "MplsLdpIdentifier"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The LDP identifier.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section on LDP Identifiers.""",
+        }, # column
+        "mplsLdpEntityIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIFFSERV-MIB", "name" : "IndexInteger"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This index is used as a secondary index to uniquely
+identify this row.  Before creating a row in this table,
+the 'mplsLdpEntityIndexNext' object should be retrieved.
+That value should be used for the value of this index
+when creating a row in this table.  NOTE:  if a value
+of zero (0) is retrieved, that indicates that no rows
+can be created in this table at this time.
+
+A secondary index (this object) is meaningful to some
+but not all, LDP implementations.  For example
+an LDP implementation which uses PPP would
+use this index to differentiate PPP sub-links.
+
+Another way to use this index is to give this the
+value of ifIndex.  However, this is dependant
+
+
+
+on the implementation.""",
+        }, # column
+        "mplsLdpEntityProtocolVersion" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "1",
+            "description" :
+                """The version number of the LDP protocol which will be
+used in the session initialization message.
+
+Section 3.5.3 in the LDP Specification specifies
+that the version of the LDP protocol is negotiated during
+session establishment. The value of this object
+represents the value that is sent in the initialization
+message.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.5.3 Initialization
+Message.""",
+        }, # column
+        "mplsLdpEntityAdminStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "enable" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "disable" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "enable",
+            "description" :
+                """The administrative status of this LDP Entity.
+If this object is changed from 'enable' to 'disable'
+and this entity has already attempted to establish
+contact with a Peer, then all contact with that
+Peer is lost and all information from that Peer
+needs to be removed from the MIB. (This implies
+that the network management subsystem should clean
+up any related entry in the mplsLdpPeerTable.  This
+further implies that a 'tear-down' for that session
+is issued and the session and all information related
+to that session cease to exist).
+
+At this point the operator is able to change values
+which are related to this entity.
+
+When the admin status is set back to 'enable', then
+this Entity will attempt to establish a new session
+with the Peer.""",
+        }, # column
+        "mplsLdpEntityOperStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "unknown" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "enabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "disabled" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The operational status of this LDP Entity.
+
+The value of unknown(1) indicates that the
+operational status cannot be determined at
+this time.  The value of unknown should be
+a transient condition before changing
+to enabled(2) or disabled(3).""",
+        }, # column
+        "mplsLdpEntityTcpPort" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetPortNumber"},
+            },
+            "access" : "readwrite",
+            "default" : "646",
+            "description" :
+                """The TCP Port for
+LDP.  The default value is the well-known
+value of this port.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.10, Well-known
+Numbers, and Section 3.10.1.  UDP and TCP Ports.""",
+        }, # column
+        "mplsLdpEntityUdpDscPort" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetPortNumber"},
+            },
+            "access" : "readwrite",
+            "default" : "646",
+            "description" :
+                """The UDP Discovery Port for
+LDP.  The default value is the
+well-known value for this port.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 2.4.1,
+Basic Discovery Mechanism, Section 2.4.2,
+Extended Discovery Mechanism, Section
+3.10, Well-known Numbers, and Section 3.10.1.
+
+
+
+UDP and TCP Ports.""",
+        }, # column
+        "mplsLdpEntityMaxPduLength" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "256",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "256",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "4096",
+            "units" : "octets",
+            "description" :
+                """The maximum PDU Length that is sent in
+the Common Session Parameters of an Initialization
+Message. According to the LDP Specification [RFC3036]
+a value of 255 or less specifies the
+default maximum length of 4096 octets, this is why
+the value of this object starts at 256.  The operator
+should explicitly choose the default value (i.e., 4096),
+or some other value.
+
+The receiving LSR MUST calculate the maximum PDU
+length for the session by using the smaller of its and
+its peer's proposals for Max PDU Length.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.5.3.
+Initialization Message.""",
+        }, # column
+        "mplsLdpEntityKeepAliveHoldTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "40",
+            "units" : "seconds",
+            "description" :
+                """The 16-bit integer value which is the proposed keep
+alive hold timer for this LDP Entity.""",
+        }, # column
+        "mplsLdpEntityHelloHoldTimer" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "units" : "seconds",
+            "description" :
+                """The 16-bit integer value which is the proposed Hello
+hold timer for this LDP Entity. The Hello Hold time
+in seconds.
+
+
+
+An LSR maintains a record of Hellos received
+from potential peers.  This object represents
+the Hold Time in the Common Hello Parameters TLV of
+the Hello Message.
+
+A value of 0 is a default value and should be
+interpretted in conjunction with the
+mplsLdpEntityTargetPeer object.
+
+If the value of this object is 0: if the value of the
+mplsLdpEntityTargetPeer object is false(2), then this
+specifies that the Hold Time's actual default value is
+15 seconds (i.e., the default Hold time for Link Hellos
+is 15 seconds).  Otherwise if the value of the
+mplsLdpEntityTargetPeer object is true(1), then this
+specifies that the Hold Time's actual default value is
+45 seconds (i.e., the default Hold time for Targeted
+Hellos is 45 seconds).
+
+A value of 65535 means infinite (i.e., wait forever).
+
+All other values represent the amount of time in
+seconds to wait for a Hello Message.  Setting the
+hold time to a value smaller than 15 is not
+recommended, although not forbidden according
+to RFC3036.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.5.2.,
+Hello Message.""",
+        }, # column
+        "mplsLdpEntityInitSessionThreshold" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "100"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "100"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "8",
+            "description" :
+                """When attempting to establish a session with
+a given Peer, the given LDP Entity should
+send out the SNMP notification,
+'mplsLdpInitSessionThresholdExceeded', when
+the number of Session Initialization messages
+sent exceeds this threshold.
+
+The notification is used to notify an
+operator when this Entity and its Peer are
+possibly engaged in an endless sequence
+of messages as each NAKs the other's
+
+
+
+Initialization messages with Error Notification
+messages.  Setting this threshold which triggers
+the notification is one way to notify the
+operator.  The notification should be generated
+each time this threshold is exceeded and
+for every subsequent Initialization message
+which is NAK'd with an Error Notification
+message after this threshold is exceeded.
+
+A value of 0 (zero) for this object
+indicates that the threshold is infinity, thus
+the SNMP notification will never be generated.""",
+            "reference" :
+                """RFC3036, LDP Specification,
+Section 2.5.3 Session Initialization.""",
+        }, # column
+        "mplsLdpEntityLabelDistMethod" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-TC-STD-MIB", "name" : "MplsLabelDistributionMethod"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """For any given LDP session, the method of
+label distribution must be specified.""",
+        }, # column
+        "mplsLdpEntityLabelRetentionMode" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-TC-STD-MIB", "name" : "MplsRetentionMode"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The LDP Entity can be configured to use either
+conservative or liberal label retention mode.
+
+If the value of this object is conservative(1)
+then advertized label mappings are retained
+only if they will be used to forward packets,
+i.e., if label came from a valid next hop.
+
+If the value of this object is liberal(2)
+then all advertized label mappings are retained
+whether they are from a valid next hop or not.""",
+        }, # column
+        "mplsLdpEntityPathVectorLimit" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """If the value of this object is 0 (zero) then
+Loop Detection for Path Vectors is disabled.
+
+Otherwise, if this object has a value greater than
+zero, then Loop Dection for Path Vectors is enabled,
+and the Path Vector Limit is this value.
+Also, the value of the object,
+'mplsLdpLsrLoopDetectionCapable', must be set to
+either 'pathVector(4)' or 'hopCountAndPathVector(5)',
+if this object has a value greater than 0 (zero),
+otherwise it is ignored.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 2.8 Loop Dection,
+Section 3.4.5 Path Vector TLV.""",
+        }, # column
+        "mplsLdpEntityHopCountLimit" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """If the value of this object is 0 (zero),
+then Loop Detection using Hop Counters is
+disabled.
+
+If the value of this object is greater than
+0 (zero) then Loop Detection using Hop
+Counters is enabled, and this object
+specifies this Entity's maximum allowable
+value for the Hop Count.
+Also, the value of the object
+mplsLdpLsrLoopDetectionCapable must be set
+to either 'hopCount(3)' or
+'hopCountAndPathVector(5)' if this object
+has a value greater than 0 (zero), otherwise
+it is ignored.""",
+        }, # column
+        "mplsLdpEntityTransportAddrKind" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "interface" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "loopback" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "loopback",
+            "description" :
+                """This specifies whether the loopback or interface
+address is to be used as the transport address
+in the transport address TLV of the
+hello message.
+
+If the value is interface(1), then the IP
+address of the interface from which hello
+messages are sent is used as the transport
+address in the hello message.
+
+Otherwise, if the value is loopback(2), then the IP
+address of the loopback interface is used as the
+transport address in the hello message.""",
+        }, # column
+        "mplsLdpEntityTargetPeer" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.17",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "default" : "false",
+            "description" :
+                """If this LDP entity uses targeted peer then set
+this to true.""",
+        }, # column
+        "mplsLdpEntityTargetPeerAddrType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.18",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddressType"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The type of the internetwork layer address used for
+the Extended Discovery.  This object indicates how
+the value of mplsLdpEntityTargetPeerAddr is to
+be interpreted.""",
+        }, # column
+        "mplsLdpEntityTargetPeerAddr" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.19",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddress"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The value of the internetwork layer address
+used for the Extended Discovery.  The value of
+mplsLdpEntityTargetPeerAddrType specifies how
+this address is to be interpreted.""",
+        }, # column
+        "mplsLdpEntityLabelType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.20",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-TC-STD-MIB", "name" : "MplsLdpLabelType"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Specifies the optional parameters for the LDP
+Initialization Message.
+
+If the value is generic(1) then no
+optional parameters will be sent in
+the LDP Initialization message associated
+with this Entity.
+
+If the value is atmParameters(2) then
+a row must be created in the
+mplsLdpEntityAtmTable, which
+corresponds to this entry.
+
+If the value is frameRelayParameters(3) then
+a row must be created in the
+mplsLdpEntityFrameRelayTable, which
+corresponds to this entry.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.5.3.,
+Initialization Message.""",
+        }, # column
+        "mplsLdpEntityDiscontinuityTime" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.21",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime on the most recent occasion
+at which any one or more of this entity's counters
+suffered a discontinuity.  The relevant counters
+are the specific instances associated with this
+entity of any Counter32 object contained
+in the 'mplsLdpEntityStatsTable'.  If no such
+discontinuities have occurred since the last
+re-initialization of the local management
+subsystem, then this object contains a zero
+value.""",
+        }, # column
+        "mplsLdpEntityStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.22",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "default" : "nonVolatile",
+            "description" :
+                """The storage type for this conceptual row.
+Conceptual rows having the value 'permanent(4)'
+need not allow write-access to any columnar
+objects in the row.""",
+        }, # column
+        "mplsLdpEntityRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.3.1.23",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The status of this conceptual row.  All writable
+objects in this row may be modified at any
+time, however, as described in detail in
+the section entitled, 'Changing Values After
+Session Establishment', and again described
+in the DESCRIPTION clause of the
+mplsLdpEntityAdminStatus object, if a session
+has been initiated with a Peer, changing objects
+in this table will wreak havoc with the session
+and interrupt traffic.  To repeat again:
+the recommended procedure is to
+set the mplsLdpEntityAdminStatus to down, thereby
+explicitly causing a session to be torn down. Then,
+change objects in this entry, then set
+the mplsLdpEntityAdminStatus to enable,
+which enables a new session to be initiated.""",
+        }, # column
+        "mplsLdpEntityStatsTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.4",
+            "status" : "current",
+            "description" :
+                """This table is a read-only table which augments
+the mplsLdpEntityTable.  The purpose of this
+table is to keep statistical information about
+the LDP Entities on the LSR.""",
+        }, # table
+        "mplsLdpEntityStatsEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.4.1",
+            "status" : "current",
+            "linkage" : [
+                { "MPLS-LDP-STD-MIB" : {
+                    "indexkind" : "augments",
+                    "relatedNode" : "mplsLdpEntityEntry",
+                }},
+            ],
+            "description" :
+                """A row in this table contains statistical information
+about an LDP Entity.  Some counters contained in a
+row are for fatal errors received during a former
+LDP Session associated with this entry.  For example,
+an LDP PDU received on a TCP connection during an
+LDP Session contains a fatal error.  That
+error is counted here, because the
+session is terminated.
+
+If the error is NOT fatal (i.e., the Session
+remains), then the error is counted in the
+mplsLdpSessionStatsEntry.""",
+        }, # row
+        "mplsLdpEntityStatsSessionAttempts" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.4.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of the Session Initialization messages
+which were sent or received by this LDP Entity and
+were NAK'd.   In other words, this counter counts
+the number of session initializations that failed.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by the value of
+mplsLdpEntityDiscontinuityTime.""",
+        }, # column
+        "mplsLdpEntityStatsSessionRejectedNoHelloErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.4.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of the Session Rejected/No Hello Error
+Notification Messages sent or received by
+this LDP Entity.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by the value of
+mplsLdpEntityDiscontinuityTime.""",
+        }, # column
+        "mplsLdpEntityStatsSessionRejectedAdErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.4.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of the Session Rejected/Parameters
+Advertisement Mode Error Notification Messages sent
+or received by this LDP Entity.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by the value of
+mplsLdpEntityDiscontinuityTime.""",
+        }, # column
+        "mplsLdpEntityStatsSessionRejectedMaxPduErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.4.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of the Session Rejected/Parameters
+
+Max Pdu Length Error Notification Messages sent
+or received by this LDP Entity.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by the value of
+mplsLdpEntityDiscontinuityTime.""",
+        }, # column
+        "mplsLdpEntityStatsSessionRejectedLRErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.4.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """A count of the Session Rejected/Parameters
+Label Range Notification Messages sent
+or received by this LDP Entity.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by the value of
+mplsLdpEntityDiscontinuityTime.""",
+        }, # column
+        "mplsLdpEntityStatsBadLdpIdentifierErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.4.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object counts the number of Bad LDP Identifier
+Fatal Errors detected by the session(s)
+(past and present) associated with this LDP Entity.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by the value of
+mplsLdpEntityDiscontinuityTime.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.5.1.2.""",
+        }, # column
+        "mplsLdpEntityStatsBadPduLengthErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.4.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object counts the number of Bad PDU Length
+Fatal Errors detected by the session(s)
+(past and present) associated with this LDP Entity.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by the value of
+mplsLdpEntityDiscontinuityTime.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.5.1.2.""",
+        }, # column
+        "mplsLdpEntityStatsBadMessageLengthErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.4.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object counts the number of Bad Message
+Length Fatal Errors detected by the session(s)
+(past and present) associated with this LDP Entity.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by the value of
+mplsLdpEntityDiscontinuityTime.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.5.1.2.""",
+        }, # column
+        "mplsLdpEntityStatsBadTlvLengthErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.4.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object counts the number of Bad TLV
+Length Fatal Errors detected by the session(s)
+(past and present) associated with this LDP Entity.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by the value of
+mplsLdpEntityDiscontinuityTime.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.5.1.2.""",
+        }, # column
+        "mplsLdpEntityStatsMalformedTlvValueErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.4.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object counts the number of Malformed TLV
+Value Fatal Errors detected by the session(s)
+(past and present) associated with this
+LDP Entity.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by the value of
+mplsLdpEntityDiscontinuityTime.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.5.1.2.""",
+        }, # column
+        "mplsLdpEntityStatsKeepAliveTimerExpErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.4.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object counts the number of Session Keep Alive
+Timer Expired Errors detected by the session(s)
+(past and present) associated with this LDP Entity.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by the value of
+mplsLdpEntityDiscontinuityTime.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.5.1.2.""",
+        }, # column
+        "mplsLdpEntityStatsShutdownReceivedNotifications" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.4.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object counts the number of Shutdown Notifications
+received related to session(s) (past and present)
+associated with this LDP Entity.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by the value of
+mplsLdpEntityDiscontinuityTime.""",
+        }, # column
+        "mplsLdpEntityStatsShutdownSentNotifications" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.2.4.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object counts the number of Shutdown Notfications
+sent related to session(s) (past and present) associated
+with this LDP Entity.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by the value of
+
+
+
+mplsLdpEntityDiscontinuityTime.""",
+        }, # column
+        "mplsLdpSessionObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3",
+        }, # node
+        "mplsLdpPeerLastChange" : {
+            "nodetype" : "scalar",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime at the time of the most
+recent addition or deletion to/from the
+mplsLdpPeerTable/mplsLdpSessionTable.""",
+        }, # scalar
+        "mplsLdpPeerTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.2",
+            "status" : "current",
+            "description" :
+                """Information about LDP peers known by Entities in
+the mplsLdpEntityTable.  The information in this table
+is based on information from the Entity-Peer interaction
+during session initialization but is not appropriate
+for the mplsLdpSessionTable, because objects in this
+table may or may not be used in session establishment.""",
+        }, # table
+        "mplsLdpPeerEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.2.1",
+            "status" : "current",
+            "linkage" : [
+                "mplsLdpEntityLdpId",
+                "mplsLdpEntityIndex",
+                "mplsLdpPeerLdpId",
+            ],
+            "description" :
+                """Information about a single Peer which is related
+to a Session.  This table is augmented by
+the mplsLdpSessionTable.""",
+        }, # row
+        "mplsLdpPeerLdpId" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-TC-STD-MIB", "name" : "MplsLdpIdentifier"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The LDP identifier of this LDP Peer.""",
+        }, # column
+        "mplsLdpPeerLabelDistMethod" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-TC-STD-MIB", "name" : "MplsLabelDistributionMethod"},
+            },
+            "access" : "readonly",
+            "description" :
+                """For any given LDP session, the method of
+label distribution must be specified.""",
+        }, # column
+        "mplsLdpPeerPathVectorLimit" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """If the value of this object is 0 (zero) then
+Loop Dection for Path Vectors for this Peer
+is disabled.
+
+Otherwise, if this object has a value greater than
+zero, then Loop Dection for Path  Vectors for this
+Peer is enabled and the Path Vector Limit is this value.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 2.8 Loop Dection,
+Section 3.4.5 Path Vector TLV.""",
+        }, # column
+        "mplsLdpPeerTransportAddrType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddressType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The type of the Internet address for the
+mplsLdpPeerTransportAddr object.  The LDP
+specification describes this as being either
+an IPv4 Transport Address or IPv6 Transport
+
+
+
+Address which is used in opening the LDP session's
+TCP connection, or if the optional TLV is not
+present, then this is the IPv4/IPv6 source
+address for the UPD packet carrying the Hellos.
+
+This object specifies how the value of the
+mplsLdpPeerTransportAddr object should be
+interpreted.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 2.5.2
+Transport Connection Establishment and
+Section 3.5.2.1 Hello Message Procedures.""",
+        }, # column
+        "mplsLdpPeerTransportAddr" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddress"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The Internet address advertised by the peer
+in the Hello Message or the Hello source address.
+
+The type of this address is specified by the
+value of the mplsLdpPeerTransportAddrType
+object.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 2.5.2
+Transport Connection Establishment and
+Section 3.5.2.1 Hello Message Procedures.""",
+        }, # column
+        "mplsLdpSessionTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.3",
+            "status" : "current",
+            "description" :
+                """A table of Sessions between the LDP Entities
+and LDP Peers.  This table AUGMENTS the
+mplsLdpPeerTable.  Each row in this table
+represents a single session.""",
+        }, # table
+        "mplsLdpSessionEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.3.1",
+            "status" : "current",
+            "linkage" : [
+                { "MPLS-LDP-STD-MIB" : {
+                    "indexkind" : "augments",
+                    "relatedNode" : "mplsLdpPeerEntry",
+                }},
+            ],
+            "description" :
+                """An entry in this table represents information on a
+single session between an LDP Entity and LDP Peer.
+The information contained in a row is read-only.
+
+Please note:  the Path Vector Limit for the
+Session is the value which is configured in
+the corresponding mplsLdpEntityEntry. The
+Peer's Path Vector Limit is in the
+mplsLdpPeerPathVectorLimit object in the
+mplsLdpPeerTable.
+
+Values which may differ from those configured are
+noted in the objects of this table, the
+mplsLdpAtmSessionTable and the
+mplsLdpFrameRelaySessionTable. A value will
+differ if it was negotiated between the
+Entity and the Peer.  Values may or may not
+be negotiated.  For example, if the values
+are the same then no negotiation takes place.
+If they are negotiated, then they may differ.""",
+        }, # row
+        "mplsLdpSessionStateLastChange" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime at the time this
+Session entered its current state as
+denoted by the mplsLdpSessionState
+object.""",
+        }, # column
+        "mplsLdpSessionState" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "nonexistent" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "initialized" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "openrec" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "opensent" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "operational" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The current state of the session, all of the
+states 1 to 5 are based on the state machine
+for session negotiation behavior.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 2.5.4,
+Initialization State Machine.""",
+        }, # column
+        "mplsLdpSessionRole" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "unknown" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "active" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "passive" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """During session establishment the LSR/LER takes either
+the active role or the passive role based on address
+comparisons.  This object indicates whether this LSR/LER
+was behaving in an active role or passive role during
+this session's establishment.
+
+The value of unknown(1), indicates that the role is not
+able to be determined at the present time.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 2.5.3.,
+Session Initialization""",
+        }, # column
+        "mplsLdpSessionProtocolVersion" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.3.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The version of the LDP Protocol which
+this session is using.  This is the version of
+
+
+
+the LDP protocol which has been negotiated
+during session initialization.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.5.3,
+Initialization Message.""",
+        }, # column
+        "mplsLdpSessionKeepAliveHoldTimeRem" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.3.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeInterval"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The keep alive hold time remaining for
+this session.""",
+        }, # column
+        "mplsLdpSessionKeepAliveTime" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.3.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """The negotiated KeepAlive Time which
+represents the amount of seconds between
+keep alive messages.  The
+mplsLdpEntityKeepAliveHoldTimer
+related to this Session is the
+value that was proposed as the
+KeepAlive Time for this session.
+
+This value is negotiated during
+session initialization between
+the entity's proposed value
+(i.e., the value configured in
+mplsLdpEntityKeepAliveHoldTimer)
+and the peer's proposed
+KeepAlive Hold Timer value.
+This value is the smaller
+of the two proposed values.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.5.3,
+Initialization Message.""",
+        }, # column
+        "mplsLdpSessionMaxPduLength" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.3.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "units" : "octets",
+            "description" :
+                """The value of maximum allowable length for LDP PDUs for
+this session.  This value may have been negotiated
+during the Session Initialization.  This object is
+related to the mplsLdpEntityMaxPduLength object.  The
+mplsLdpEntityMaxPduLength object specifies the requested
+LDP PDU length, and this object reflects the negotiated
+LDP PDU length between the Entity and
+the Peer.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.5.3,
+Initialization Message.""",
+        }, # column
+        "mplsLdpSessionDiscontinuityTime" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.3.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime on the most recent occasion
+at which any one or more of this session's counters
+suffered a discontinuity.  The relevant counters are
+the specific instances associated with this session
+of any Counter32 object contained in the
+mplsLdpSessionStatsTable.
+
+The initial value of this object is the value of
+sysUpTime when the entry was created in this table.
+
+Also, a command generator can distinguish when a session
+between a given Entity and Peer goes away and a new
+session is established.  This value would change and
+thus indicate to the command generator that this is a
+different session.""",
+        }, # column
+        "mplsLdpSessionStatsTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.4",
+            "status" : "current",
+            "description" :
+                """A table of statistics for Sessions between
+LDP Entities and LDP Peers.  This table AUGMENTS
+
+
+
+the mplsLdpPeerTable.""",
+        }, # table
+        "mplsLdpSessionStatsEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.4.1",
+            "status" : "current",
+            "linkage" : [
+                { "MPLS-LDP-STD-MIB" : {
+                    "indexkind" : "augments",
+                    "relatedNode" : "mplsLdpPeerEntry",
+                }},
+            ],
+            "description" :
+                """An entry in this table represents statistical
+information on a single session between an LDP
+Entity and LDP Peer.""",
+        }, # row
+        "mplsLdpSessionStatsUnknownMesTypeErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.4.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object counts the number of Unknown Message Type
+Errors detected by this LSR/LER during this session.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by the value of
+mplsLdpSessionDiscontinuityTime.""",
+        }, # column
+        "mplsLdpSessionStatsUnknownTlvErrors" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.4.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object counts the number of Unknown TLV Errors
+detected by this LSR/LER during this session.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by the value of
+mplsLdpSessionDiscontinuityTime.""",
+        }, # column
+        "mplsLdpHelloAdjacencyObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.5",
+        }, # node
+        "mplsLdpHelloAdjacencyTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.5.1",
+            "status" : "current",
+            "description" :
+                """A table of Hello Adjacencies for Sessions.""",
+        }, # table
+        "mplsLdpHelloAdjacencyEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.5.1.1",
+            "status" : "current",
+            "linkage" : [
+                "mplsLdpEntityLdpId",
+                "mplsLdpEntityIndex",
+                "mplsLdpPeerLdpId",
+                "mplsLdpHelloAdjacencyIndex",
+            ],
+            "description" :
+                """Each row represents a single LDP Hello Adjacency.
+An LDP Session can have one or more Hello
+Adjacencies.""",
+        }, # row
+        "mplsLdpHelloAdjacencyIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.5.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "4294967295"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "4294967295"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """An identifier for this specific adjacency.""",
+        }, # column
+        "mplsLdpHelloAdjacencyHoldTimeRem" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.5.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeInterval"},
+            },
+            "access" : "readonly",
+            "units" : "seconds",
+            "description" :
+                """If the value of this object is 65535,
+this means that the hold time is infinite
+(i.e., wait forever).
+
+Otherwise, the time remaining for
+this Hello Adjacency to receive its
+next Hello Message.
+
+This interval will change when the 'next'
+Hello Message which corresponds to this
+Hello Adjacency is received unless it
+is infinite.""",
+        }, # column
+        "mplsLdpHelloAdjacencyHoldTime" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.5.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """The Hello hold time which is negotiated between
+the Entity and the Peer.  The entity associated
+with this Hello Adjacency issues a proposed
+Hello Hold Time value in the
+mplsLdpEntityHelloHoldTimer object.  The peer
+also proposes a value and this object represents
+the negotiated value.
+
+A value of 0 means the default,
+which is 15 seconds for Link Hellos
+and 45 seconds for Targeted Hellos.
+A value of 65535 indicates an
+infinite hold time.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.5.2 Hello Message""",
+        }, # column
+        "mplsLdpHelloAdjacencyType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.5.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "link" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "targeted" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This adjacency is the result of a 'link'
+hello if the value of this object is link(1).
+
+
+
+Otherwise, it is a result of a 'targeted'
+hello, targeted(2).""",
+        }, # column
+        "mplsInSegmentLdpLspTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.6",
+            "status" : "current",
+            "description" :
+                """A table of LDP LSP's which
+map to the mplsInSegmentTable in the
+MPLS-LSR-STD-MIB module.""",
+        }, # table
+        "mplsInSegmentLdpLspEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.6.1",
+            "status" : "current",
+            "linkage" : [
+                "mplsLdpEntityLdpId",
+                "mplsLdpEntityIndex",
+                "mplsLdpPeerLdpId",
+                "mplsInSegmentLdpLspIndex",
+            ],
+            "description" :
+                """An entry in this table represents information
+on a single LDP LSP which is represented by
+a session's index triple (mplsLdpEntityLdpId,
+mplsLdpEntityIndex, mplsLdpPeerLdpId) AND the
+index for the mplsInSegmentTable
+(mplsInSegmentLdpLspLabelIndex) from the
+MPLS-LSR-STD-MIB.
+
+The information contained in a row is read-only.""",
+        }, # row
+        "mplsInSegmentLdpLspIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.6.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-LSR-STD-MIB", "name" : "MplsIndexType"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This contains the same value as the
+mplsInSegmentIndex in the
+MPLS-LSR-STD-MIB's mplsInSegmentTable.""",
+        }, # column
+        "mplsInSegmentLdpLspLabelType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.6.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-TC-STD-MIB", "name" : "MplsLdpLabelType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The Layer 2 Label Type.""",
+        }, # column
+        "mplsInSegmentLdpLspType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.6.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-TC-STD-MIB", "name" : "MplsLspType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The type of LSP connection.""",
+        }, # column
+        "mplsOutSegmentLdpLspTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.7",
+            "status" : "current",
+            "description" :
+                """A table of LDP LSP's which
+map to the mplsOutSegmentTable in the
+MPLS-LSR-STD-MIB.""",
+        }, # table
+        "mplsOutSegmentLdpLspEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.7.1",
+            "status" : "current",
+            "linkage" : [
+                "mplsLdpEntityLdpId",
+                "mplsLdpEntityIndex",
+                "mplsLdpPeerLdpId",
+                "mplsOutSegmentLdpLspIndex",
+            ],
+            "description" :
+                """An entry in this table represents information
+on a single LDP LSP which is represented by
+a session's index triple (mplsLdpEntityLdpId,
+mplsLdpEntityIndex, mplsLdpPeerLdpId) AND the
+index (mplsOutSegmentLdpLspIndex)
+for the mplsOutSegmentTable.
+
+The information contained in a row is read-only.""",
+        }, # row
+        "mplsOutSegmentLdpLspIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.7.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-LSR-STD-MIB", "name" : "MplsIndexType"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This contains the same value as the
+mplsOutSegmentIndex in the
+MPLS-LSR-STD-MIB's mplsOutSegmentTable.""",
+        }, # column
+        "mplsOutSegmentLdpLspLabelType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.7.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-TC-STD-MIB", "name" : "MplsLdpLabelType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The Layer 2 Label Type.""",
+        }, # column
+        "mplsOutSegmentLdpLspType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.7.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-TC-STD-MIB", "name" : "MplsLspType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The type of LSP connection.""",
+        }, # column
+        "mplsFecObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.8",
+        }, # node
+        "mplsFecLastChange" : {
+            "nodetype" : "scalar",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.8.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime at the time of the most
+recent addition/deletion of an entry
+to/from the mplsLdpFectTable or
+the most recent change in values to any objects
+in the mplsLdpFecTable.
+
+If no such changes have occurred since the last
+re-initialization of the local management subsystem,
+then this object contains a zero value.""",
+        }, # scalar
+        "mplsFecIndexNext" : {
+            "nodetype" : "scalar",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.8.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIFFSERV-MIB", "name" : "IndexIntegerNextFree"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object contains an appropriate value to
+be used for mplsFecIndex when creating
+entries in the mplsFecTable. The value
+0 indicates that no unassigned entries are
+available.""",
+        }, # scalar
+        "mplsFecTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.8.3",
+            "status" : "current",
+            "description" :
+                """This table represents the FEC
+(Forwarding Equivalence Class)
+Information associated with an LSP.""",
+        }, # table
+        "mplsFecEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.8.3.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "mplsFecIndex",
+            ],
+            "description" :
+                """Each row represents a single FEC Element.""",
+        }, # row
+        "mplsFecIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.8.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIFFSERV-MIB", "name" : "IndexInteger"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The index which uniquely identifies this entry.""",
+        }, # column
+        "mplsFecType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.8.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "prefix" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "hostAddress" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The type of the FEC.  If the value of this object
+is 'prefix(1)' then the FEC type described by this
+row is an address prefix.
+
+If the value of this object is 'hostAddress(2)' then
+the FEC type described by this row is a host address.""",
+            "reference" :
+                """RFC3036, Section 3.4.1. FEC TLV.""",
+        }, # column
+        "mplsFecAddrPrefixLength" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.8.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddressPrefixLength"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """If the value of the 'mplsFecType' is 'hostAddress(2)'
+then this object is undefined.
+
+If the value of 'mplsFecType' is 'prefix(1)'
+then the value of this object is the length in
+bits of the address prefix represented by
+'mplsFecAddr', or zero.  If the value of this
+object is zero, this indicates that the
+prefix matches all addresses.  In this case the
+address prefix MUST also be zero (i.e., 'mplsFecAddr'
+should have the value of zero.)""",
+            "reference" :
+                """RFC3036, Section 3.4.1. FEC TLV.""",
+        }, # column
+        "mplsFecAddrType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.8.3.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddressType"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The value of this object is the type of the
+Internet address.  The value of this object,
+decides how the value of the mplsFecAddr object
+is interpreted.""",
+            "reference" :
+                """RFC3036, Section 3.4.1. FEC TLV.""",
+        }, # column
+        "mplsFecAddr" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.8.3.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddress"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The value of this object is interpreted based
+on the value of the 'mplsFecAddrType' object.
+
+This address is then further interpretted as
+an being used with the address prefix,
+or as the host address.  This further interpretation
+is indicated by the 'mplsFecType' object.
+In other words, the FEC element is populated
+according to the Prefix FEC Element value encoding, or
+the Host Address FEC Element encoding.""",
+            "reference" :
+                """RFC3036, Section 3.4.1 FEC TLV.""",
+        }, # column
+        "mplsFecStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.8.3.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "default" : "nonVolatile",
+            "description" :
+                """The storage type for this conceptual row.
+Conceptual rows having the value 'permanent(4)'
+need not allow write-access to any columnar
+objects in the row.""",
+        }, # column
+        "mplsFecRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.8.3.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The status of this conceptual row.  If the value of this
+object is 'active(1)', then none of the writable objects
+of this entry can be modified, except to set this object
+to 'destroy(6)'.
+
+NOTE: if this row is being referenced by any entry in
+the mplsLdpLspFecTable, then a request to destroy
+this row, will result in an inconsistentValue error.""",
+        }, # column
+        "mplsLdpLspFecLastChange" : {
+            "nodetype" : "scalar",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime at the time of the most
+recent addition/deletion of an entry
+to/from the mplsLdpLspFecTable or
+the most recent change in values to any objects in the
+mplsLdpLspFecTable.
+
+If no such changes have occurred since the last
+re-initialization of the local management subsystem,
+then this object contains a zero value.""",
+        }, # scalar
+        "mplsLdpLspFecTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.10",
+            "status" : "current",
+            "description" :
+                """A table which shows the relationship between
+LDP LSPs and FECs.  Each row represents
+a single LDP LSP to FEC association.""",
+        }, # table
+        "mplsLdpLspFecEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.10.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "mplsLdpEntityLdpId",
+                "mplsLdpEntityIndex",
+                "mplsLdpPeerLdpId",
+                "mplsLdpLspFecSegment",
+                "mplsLdpLspFecSegmentIndex",
+                "mplsLdpLspFecIndex",
+            ],
+            "description" :
+                """An entry represents a LDP LSP
+to FEC association.""",
+        }, # row
+        "mplsLdpLspFecSegment" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.10.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "inSegment" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "outSegment" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """If the value is inSegment(1), then this
+indicates that the following index,
+mplsLdpLspFecSegmentIndex, contains the same
+value as the mplsInSegmentLdpLspIndex.
+
+Otherwise, if the value of this object is
+
+
+
+outSegment(2),  then this
+indicates that following index,
+mplsLdpLspFecSegmentIndex, contains the same
+value as the mplsOutSegmentLdpLspIndex.""",
+        }, # column
+        "mplsLdpLspFecSegmentIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.10.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-LSR-STD-MIB", "name" : "MplsIndexType"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This index is interpretted by using the value
+of the mplsLdpLspFecSegment.
+
+If the mplsLdpLspFecSegment is inSegment(1),
+then this index has the same value as
+mplsInSegmentLdpLspIndex.
+
+If the mplsLdpLspFecSegment is outSegment(2),
+then this index has the same value as
+mplsOutSegmentLdpLspIndex.""",
+        }, # column
+        "mplsLdpLspFecIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.10.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIFFSERV-MIB", "name" : "IndexInteger"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This index identifies the FEC entry in the
+mplsFecTable associated with this session.
+In other words, the value of this index
+is the same as the value of the mplsFecIndex
+that denotes the FEC associated with this
+Session.""",
+        }, # column
+        "mplsLdpLspFecStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.10.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "default" : "nonVolatile",
+            "description" :
+                """The storage type for this conceptual row.
+Conceptual rows having the value 'permanent(4)'
+need not allow write-access to any columnar
+objects in the row.""",
+        }, # column
+        "mplsLdpLspFecRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.10.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The status of this conceptual row.  If the
+value of this object is 'active(1)', then
+none of the writable objects of this entry
+can be modified.
+
+The Agent should delete this row when
+the session ceases to exist.  If an
+operator wants to associate the session with
+a different FEC, the recommended
+procedure is (as described in detail in the section
+entitled, 'Changing Values After Session
+Establishment', and again described in the
+DESCRIPTION clause of the
+mplsLdpEntityAdminStatus object)
+is to set the mplsLdpEntityAdminStatus to
+down, thereby explicitly causing a session
+to be torn down. This will also
+cause this entry to be deleted.
+
+Then, set the mplsLdpEntityAdminStatus
+to enable which enables a new session to be initiated.
+Once the session is initiated, an entry may be
+added to this table to associate the new session
+with a FEC.""",
+        }, # column
+        "mplsLdpSessionPeerAddrTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.11",
+            "status" : "current",
+            "description" :
+                """This table 'extends' the mplsLdpSessionTable.
+This table is used to store Label Address Information
+from Label Address Messages received by this LSR from
+Peers.  This table is read-only and should be updated
+
+
+
+when Label Withdraw Address Messages are received, i.e.,
+Rows should be deleted as appropriate.
+
+NOTE:  since more than one address may be contained
+in a Label Address Message, this table 'sparse augments',
+the mplsLdpSessionTable's information.""",
+        }, # table
+        "mplsLdpSessionPeerAddrEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.11.1",
+            "status" : "current",
+            "linkage" : [
+                "mplsLdpEntityLdpId",
+                "mplsLdpEntityIndex",
+                "mplsLdpPeerLdpId",
+                "mplsLdpSessionPeerAddrIndex",
+            ],
+            "description" :
+                """An entry in this table represents information on
+a session's single next hop address which was
+advertised in an Address Message from the LDP peer.
+The information contained in a row is read-only.""",
+        }, # row
+        "mplsLdpSessionPeerAddrIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.11.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "4294967295"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "4294967295"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """An index which uniquely identifies this entry within
+a given session.""",
+        }, # column
+        "mplsLdpSessionPeerNextHopAddrType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.11.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddressType"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The internetwork layer address type of this Next Hop
+Address as specified in the Label Address Message
+associated with this Session. The value of this
+object indicates how to interpret the value of
+
+
+
+mplsLdpSessionPeerNextHopAddr.""",
+        }, # column
+        "mplsLdpSessionPeerNextHopAddr" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.1.3.11.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddress"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The next hop address.  The type of this address
+is specified by the value of the
+mplsLdpSessionPeerNextHopAddrType.""",
+            "reference" :
+                """RFC3036, Section 2.7. LDP Identifiers
+and Next Hop Addresses""",
+        }, # column
+        "mplsLdpConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.2",
+        }, # node
+        "mplsLdpGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.2.1",
+        }, # node
+        "mplsLdpCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.2.2",
+        }, # node
+    }, # nodes
+
+    "notifications" : {
+        "mplsLdpInitSessionThresholdExceeded" : {
+            "nodetype" : "notification",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.0.1",
+            "status" : "current",
+            "objects" : {
+                "mplsLdpEntityInitSessionThreshold" : {
+                    "nodetype" : "object",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+            },
+            "description" :
+                """This notification is generated when the value of
+the 'mplsLdpEntityInitSessionThreshold' object
+is not zero, and the number of Session
+Initialization messages exceeds the value
+of the 'mplsLdpEntityInitSessionThreshold' object.""",
+        }, # notification
+        "mplsLdpPathVectorLimitMismatch" : {
+            "nodetype" : "notification",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.0.2",
+            "status" : "current",
+            "objects" : {
+                "mplsLdpEntityPathVectorLimit" : {
+                    "nodetype" : "object",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpPeerPathVectorLimit" : {
+                    "nodetype" : "object",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+            },
+            "description" :
+                """This notification is sent when the
+'mplsLdpEntityPathVectorLimit' does NOT match
+the value of the 'mplsLdpPeerPathVectorLimit' for
+a specific Entity.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.5.3.""",
+        }, # notification
+        "mplsLdpSessionUp" : {
+            "nodetype" : "notification",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.0.3",
+            "status" : "current",
+            "objects" : {
+                "mplsLdpSessionState" : {
+                    "nodetype" : "object",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpSessionDiscontinuityTime" : {
+                    "nodetype" : "object",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpSessionStatsUnknownMesTypeErrors" : {
+                    "nodetype" : "object",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpSessionStatsUnknownTlvErrors" : {
+                    "nodetype" : "object",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+            },
+            "description" :
+                """If this notification is sent when the
+value of 'mplsLdpSessionState' enters
+the 'operational(5)' state.""",
+        }, # notification
+        "mplsLdpSessionDown" : {
+            "nodetype" : "notification",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.0.4",
+            "status" : "current",
+            "objects" : {
+                "mplsLdpSessionState" : {
+                    "nodetype" : "object",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpSessionDiscontinuityTime" : {
+                    "nodetype" : "object",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpSessionStatsUnknownMesTypeErrors" : {
+                    "nodetype" : "object",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpSessionStatsUnknownTlvErrors" : {
+                    "nodetype" : "object",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+            },
+            "description" :
+                """This notification is sent when the
+value of 'mplsLdpSessionState' leaves
+the 'operational(5)' state.""",
+        }, # notification
+    }, # notifications
+
+    "groups" : {
+        "mplsLdpGeneralGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.2.1.1",
+            "status" : "current",
+            "members" : {
+                "mplsLdpLsrId" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpLsrLoopDetectionCapable" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityLastChange" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityIndexNext" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityProtocolVersion" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityAdminStatus" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityOperStatus" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityTcpPort" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityUdpDscPort" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityMaxPduLength" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityKeepAliveHoldTimer" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityHelloHoldTimer" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityInitSessionThreshold" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityLabelDistMethod" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityLabelRetentionMode" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityPathVectorLimit" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityHopCountLimit" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityTransportAddrKind" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityTargetPeer" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityTargetPeerAddrType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityTargetPeerAddr" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityLabelType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityDiscontinuityTime" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityStatsSessionAttempts" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityStatsSessionRejectedNoHelloErrors" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityStatsSessionRejectedAdErrors" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityStatsSessionRejectedMaxPduErrors" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityStatsSessionRejectedLRErrors" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityStatsBadLdpIdentifierErrors" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityStatsBadPduLengthErrors" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityStatsBadMessageLengthErrors" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityStatsBadTlvLengthErrors" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityStatsMalformedTlvValueErrors" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityStatsKeepAliveTimerExpErrors" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityStatsShutdownReceivedNotifications" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpEntityStatsShutdownSentNotifications" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpPeerLastChange" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpPeerLabelDistMethod" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpPeerPathVectorLimit" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpPeerTransportAddrType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpPeerTransportAddr" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpHelloAdjacencyHoldTimeRem" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpHelloAdjacencyHoldTime" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpHelloAdjacencyType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpSessionStateLastChange" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpSessionState" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpSessionRole" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpSessionProtocolVersion" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpSessionKeepAliveHoldTimeRem" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpSessionKeepAliveTime" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpSessionMaxPduLength" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpSessionDiscontinuityTime" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpSessionStatsUnknownMesTypeErrors" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpSessionStatsUnknownTlvErrors" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpSessionPeerNextHopAddrType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpSessionPeerNextHopAddr" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsFecLastChange" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsFecIndexNext" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsFecType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsFecAddrType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsFecAddr" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsFecAddrPrefixLength" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsFecStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsFecRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Objects that apply to all MPLS LDP implementations.""",
+        }, # group
+        "mplsLdpLspGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.2.1.2",
+            "status" : "current",
+            "members" : {
+                "mplsInSegmentLdpLspLabelType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsInSegmentLdpLspType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsOutSegmentLdpLspLabelType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsOutSegmentLdpLspType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpLspFecLastChange" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpLspFecStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpLspFecRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """These objects are for LDP implementations
+which interface to the Label Information Base (LIB)
+in the MPLS-LSR-STD-MIB.  The LIB is
+represented in the mplsInSegmentTable,
+mplsOutSegmentTable and mplsXCTable.""",
+        }, # group
+        "mplsLdpNotificationsGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.2.1.3",
+            "status" : "current",
+            "members" : {
+                "mplsLdpInitSessionThresholdExceeded" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpPathVectorLimitMismatch" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpSessionUp" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpSessionDown" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """The notification for an MPLS LDP implementation.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "mplsLdpModuleFullCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.2.2.1",
+            "status" : "current",
+            "description" :
+                """The Module is implemented with support
+for read-create and read-write.  In other
+
+
+
+words, both monitoring and configuration
+are available when using this MODULE-COMPLIANCE.""",
+            "requires" : {
+                "mplsLdpGeneralGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpNotificationsGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpLspGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "description" :
+                        """This group must be supported if the LSR MIB is
+implemented, specifically the mplsInSegmentTable,
+the mplsOutSegmentTable or the mplsXCTable.""",
+                },
+            }, # requires
+            "refinements" : {
+                "mplsLdpEntityTargetPeerAddrType" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddressType",
+                            },
+                            "unknown" : {
+                                "nodetype" : "namednumber",
+                                "number" : "0"
+                            },
+                            "ipv4" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "ipv6" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """An implementation is only required to support
+'unknown(0)', IPv4 and globally unique IPv6 addresses.""",
+                },
+                "mplsLdpEntityTargetPeerAddr" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "OctetString",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddress",
+                            },
+                            "ranges" : [
+                            {
+                                "min" : "0",
+                                "max" : "0"
+                            },
+                            {
+                                "min" : "4",
+                                "max" : "4"
+                            },
+                            {
+                                "min" : "16",
+                                "max" : "16"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "0",
+                                "max" : "16"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """An implementation is only required to support IPv4 and
+globally unique IPv6 addresses.""",
+                },
+                "mplsLdpEntityRowStatus" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "writesyntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "createAndGo" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                            "destroy" : {
+                                "nodetype" : "namednumber",
+                                "number" : "6"
+                            },
+                        },
+                    }, # writesyntax
+                    "description" :
+                        """Support for createAndWait and notInService is not
+required.""",
+                },
+                "mplsFecAddrType" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddressType",
+                            },
+                            "unknown" : {
+                                "nodetype" : "namednumber",
+                                "number" : "0"
+                            },
+                            "ipv4" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "ipv6" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """An implementation is only required to support
+'unknown(0)', IPv4 and globally unique IPv6 addresses.""",
+                },
+                "mplsFecAddr" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "OctetString",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddress",
+                            },
+                            "ranges" : [
+                            {
+                                "min" : "0",
+                                "max" : "0"
+                            },
+                            {
+                                "min" : "4",
+                                "max" : "4"
+                            },
+                            {
+                                "min" : "16",
+                                "max" : "16"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "0",
+                                "max" : "16"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """An implementation is only required to support IPv4 and
+globally unique IPv6 addresses.""",
+                },
+                "mplsFecRowStatus" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "writesyntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "createAndGo" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                            "destroy" : {
+                                "nodetype" : "namednumber",
+                                "number" : "6"
+                            },
+                        },
+                    }, # writesyntax
+                    "description" :
+                        """Support for createAndWait and notInService is not
+required.""",
+                },
+                "mplsLdpLspFecRowStatus" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "writesyntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "createAndGo" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                            "destroy" : {
+                                "nodetype" : "namednumber",
+                                "number" : "6"
+                            },
+                        },
+                    }, # writesyntax
+                    "description" :
+                        """Support for createAndWait and notInService is not
+required.""",
+                },
+                "mplsLdpSessionPeerNextHopAddrType" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddressType",
+                            },
+                            "unknown" : {
+                                "nodetype" : "namednumber",
+                                "number" : "0"
+                            },
+                            "ipv4" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "ipv6" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """An implementation is only required to support
+'unknown(0)', IPv4 and globally unique IPv6 addresses.""",
+                },
+                "mplsLdpSessionPeerNextHopAddr" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "OctetString",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddress",
+                            },
+                            "ranges" : [
+                            {
+                                "min" : "0",
+                                "max" : "0"
+                            },
+                            {
+                                "min" : "4",
+                                "max" : "4"
+                            },
+                            {
+                                "min" : "16",
+                                "max" : "16"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "0",
+                                "max" : "16"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """An implementation is only required to support IPv4
+and globally unique IPv6 addresses.""",
+                },
+            }, # refinements
+
+        }, # compliance
+        "mplsLdpModuleReadOnlyCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "MPLS-LDP-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.4.2.2.2",
+            "status" : "current",
+            "description" :
+                """The Module is implemented with support
+for read-only.  In other words, only monitoring
+is available by implementing this MODULE-COMPLIANCE.""",
+            "requires" : {
+                "mplsLdpGeneralGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpNotificationsGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-LDP-STD-MIB"
+                },
+                "mplsLdpLspGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "description" :
+                        """This group must be supported if the LSR MIB is
+implemented, specifically the mplsInSegmentTable,
+the mplsOutSegmentTable or the mplsXCTable.""",
+                },
+            }, # requires
+            "refinements" : {
+                "mplsLdpEntityProtocolVersion" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityAdminStatus" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityTcpPort" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityUdpDscPort" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityMaxPduLength" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityKeepAliveHoldTimer" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityHelloHoldTimer" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityInitSessionThreshold" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityLabelDistMethod" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityLabelRetentionMode" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityPathVectorLimit" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityHopCountLimit" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityTransportAddrKind" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityTargetPeer" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityTargetPeerAddrType" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddressType",
+                            },
+                            "unknown" : {
+                                "nodetype" : "namednumber",
+                                "number" : "0"
+                            },
+                            "ipv4" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "ipv6" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.
+An implementation is only required to support
+'unknown(0)', IPv4 and globally unique IPv6 addresses.""",
+                },
+                "mplsLdpEntityTargetPeerAddr" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "OctetString",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddress",
+                            },
+                            "ranges" : [
+                            {
+                                "min" : "0",
+                                "max" : "0"
+                            },
+                            {
+                                "min" : "4",
+                                "max" : "4"
+                            },
+                            {
+                                "min" : "16",
+                                "max" : "16"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "0",
+                                "max" : "16"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.
+An implementation is only required to support IPv4 and
+globally unique IPv6 addresses.""",
+                },
+                "mplsLdpEntityLabelType" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityStorageType" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityRowStatus" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required, and active is the
+only status that needs to be supported.""",
+                },
+                "mplsFecType" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsFecAddrPrefixLength" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsFecAddrType" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddressType",
+                            },
+                            "unknown" : {
+                                "nodetype" : "namednumber",
+                                "number" : "0"
+                            },
+                            "ipv4" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "ipv6" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.
+An implementation is only required to support
+'unknown(0)', IPv4 and globally unique IPv6 addresses.""",
+                },
+                "mplsFecAddr" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "OctetString",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddress",
+                            },
+                            "ranges" : [
+                            {
+                                "min" : "0",
+                                "max" : "0"
+                            },
+                            {
+                                "min" : "4",
+                                "max" : "4"
+                            },
+                            {
+                                "min" : "16",
+                                "max" : "16"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "0",
+                                "max" : "16"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.
+An implementation is only required to support IPv4 and
+globally unique IPv6 addresses.""",
+                },
+                "mplsFecStorageType" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsFecRowStatus" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required, and active is the
+only status that needs to be supported.""",
+                },
+                "mplsLdpLspFecStorageType" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpLspFecRowStatus" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required, and active is the
+only status that needs to be supported.""",
+                },
+                "mplsLdpSessionPeerNextHopAddrType" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddressType",
+                            },
+                            "unknown" : {
+                                "nodetype" : "namednumber",
+                                "number" : "0"
+                            },
+                            "ipv4" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "ipv6" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """An implementation is only required to support
+'unknown(0)', IPv4 and globally unique IPv6 addresses.""",
+                },
+                "mplsLdpSessionPeerNextHopAddr" : {
+                    "module" : "MPLS-LDP-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "OctetString",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddress",
+                            },
+                            "ranges" : [
+                            {
+                                "min" : "0",
+                                "max" : "0"
+                            },
+                            {
+                                "min" : "4",
+                                "max" : "4"
+                            },
+                            {
+                                "min" : "16",
+                                "max" : "16"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "0",
+                                "max" : "16"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """An implementation is only required to support IPv4
+and globally unique IPv6 addresses.""",
+                },
+            }, # refinements
+
+        }, # compliance
+    }, # compliances
+
+}