logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/MPLS-LDP-FRAME-RELAY-STD-MIB.dic

@@ -0,0 +1,862 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python MPLS-LDP-FRAME-RELAY-STD-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/MPLS-LDP-FRAME-RELAY-STD-MIB"
+
+MIB = {
+    "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+
+    "MPLS-LDP-FRAME-RELAY-STD-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """Multiprotocol Label Switching (mpls)
+Working Group""",
+        "contact" : 
+            """Joan Cucchiara (jcucchiara@mindspring.com)
+Marconi Communications, Inc.
+
+Hans Sjostrand (hans@ipunplugged.com)
+ipUnplugged
+
+James V. Luciani (james_luciani@mindspring.com)
+Marconi Communications, Inc.
+
+Working Group Chairs:
+George Swallow,   email: swallow@cisco.com
+Loa Andersson,    email: loa@pi.se
+
+MPLS Working Group, email: mpls@uu.net""",
+        "description" :
+            """Copyright (C) The Internet Society (year). The
+initial version of this MIB module was published
+in RFC 3815. For full legal notices see the RFC
+itself or see:
+http://www.ietf.org/copyrights/ianamib.html
+
+This MIB contains managed object definitions for
+configuring and monitoring the Multiprotocol Label
+Switching (MPLS), Label Distribution Protocol (LDP),
+utilizing Frame Relay as the Layer 2 media.""",
+        "revisions" : (
+            {
+                "date" : "2004-06-03 00:00",
+                "description" :
+                    """Initial version published as part of RFC 3815.""",
+            },
+        ),
+        "identity node" : "mplsLdpFrameRelayStdMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "Unsigned32"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "SNMPv2-TC", "name" : "RowStatus"},
+        {"module" : "SNMPv2-TC", "name" : "StorageType"},
+        {"module" : "FRAME-RELAY-DTE-MIB", "name" : "DLCI"},
+        {"module" : "IF-MIB", "name" : "InterfaceIndexOrZero"},
+        {"module" : "MPLS-TC-STD-MIB", "name" : "mplsStdMIB"},
+        {"module" : "MPLS-LDP-STD-MIB", "name" : "mplsLdpEntityLdpId"},
+        {"module" : "MPLS-LDP-STD-MIB", "name" : "mplsLdpEntityIndex"},
+        {"module" : "MPLS-LDP-STD-MIB", "name" : "mplsLdpPeerLdpId"},
+    ),
+
+    "nodes" : {
+        "mplsLdpFrameRelayStdMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6",
+            "status" : "current",
+        }, # node
+        "mplsLdpFrameRelayObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1",
+        }, # node
+        "mplsLdpEntityFrameRelayObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1.1",
+        }, # node
+        "mplsLdpEntityFrameRelayTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1.1.1",
+            "status" : "current",
+            "description" :
+                """This table contains Frame Relay specific
+information which could be used in the
+'Optional Parameters' and other Frame Relay
+specific information.
+
+This table 'sparse augments' the mplsLdpEntityTable
+when Frame Relay is the Layer 2 medium.""",
+        }, # table
+        "mplsLdpEntityFrameRelayEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1.1.1.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "mplsLdpEntityLdpId",
+                "mplsLdpEntityIndex",
+            ],
+            "description" :
+                """An entry in this table represents the Frame Relay
+optional parameters associated with the LDP entity.""",
+        }, # row
+        "mplsLdpEntityFrameRelayIfIndexOrZero" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1.1.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "InterfaceIndexOrZero"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This value represents either the InterfaceIndex of
+the 'ifLayer' where the Frame Relay Labels 'owned' by this
+entry were created, or 0 (zero).  The value of zero
+means that the InterfaceIndex is not known.  For example,
+if the InterfaceIndex is created subsequent to the
+Frame Relay Label's creation, then it would not be known.
+However, if the InterfaceIndex is known, then it must
+be represented by this value.
+
+If an InterfaceIndex becomes known, then the
+network management entity (e.g., SNMP agent) responsible
+for this object MUST change the value from 0 (zero) to the
+value of the InterfaceIndex.  If an Frame Relay Label is
+being used in forwarding data, then the value of this
+object MUST be the InterfaceIndex.""",
+        }, # column
+        "mplsLdpEntityFrameRelayMergeCap" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1.1.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "notSupported" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "supported" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This represents whether or not the Frame Relay merge
+capability is supported.  This is the EXACT value for the
+Frame Relay Session Parameter, field M (for Frame Relay
+Merge Capabilities).  The Frame Relay Session Parameter
+is an optional parameter in the Initialization Message.
+
+
+
+
+The description from rfc3036.txt is:
+'M, Frame Relay Merge Capabilities
+   Specifies the merge capabilities of a Frame
+   Relay switch.  The following values are
+   supported in this version of the
+   specification:
+
+          Value          Meaning
+
+            0            Merge not supported
+            1            Merge supported
+
+   Non-merge and merge Frame Relay LSRs may
+   freely interoperate.'
+
+   Please refer to the following reference for a
+   complete description of this feature.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.5.3
+Initialization Message.""",
+        }, # column
+        "mplsLdpEntityFrameRelayLRComponents" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1.1.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "65535"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Number of Label Range Components in the Initialization
+message.  This also represents the number of entries
+in the mplsLdpEntityFrameRelayLRTable which correspond
+to this entry.
+
+This is the EXACT value for the Frame Relay Session
+Parameter, field N (for Number of label range
+components).  The Frame Relay Session Parameter
+is an optional parameter in the Initialization
+Message.
+
+The description from rfc3036.txt is:
+
+'N, Number of label range components
+    Specifies the number of Frame Relay Label
+    Range Components included in the TLV.'
+
+ Please refer to the following reference for a
+ complete description of this feature.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.5.3
+
+
+
+Initialization Message.""",
+        }, # column
+        "mplsLdpEntityFrameRelayVcDirectionality" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1.1.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "bidirectional" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "unidirection" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """If the value of this object is 'bidirectional(0)', then
+the LSR supports the use of a given DLCI as a label for
+both directions independently.  If the value of
+this object is 'unidirectional(1)', then the LSR
+uses the given DLCI as a label in only one direction.
+
+This is the EXACT value for the Frame Relay Session
+Parameter, field D (for VC Directionality).  The
+Frame Relay Session Parameter is an optional
+parameter in the Initialization Message.
+
+The description from rfc3036.txt is:
+
+'D, VC Directionality
+   A value of 0 specifies bidirectional VC capability,
+   meaning the LSR can support the use of a given
+   DLCI as a label for both link directions
+   independently.  A value of 1 specifies
+   unidirectional VC capability, meaning a given
+   DLCI may appear in a label mapping for one
+   direction on the link only.  When either or both
+   of the peers specifies unidirectional VC
+   capability, both LSRs use unidirectional VC
+   label assignment for the link as follows.  The
+   LSRs compare their LDP Identifiers as unsigned
+   integers.  The LSR with the larger LDP
+   Identifier may assign only odd-numbered DLCIs
+   in the range as labels.  The system with the
+   smaller LDP Identifier may assign only
+   even-numbered DLCIs in the range as labels.'
+
+   Please refer to the following reference for a
+   complete description of this feature.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.5.3
+Initialization Message.""",
+        }, # column
+        "mplsLdpEntityFrameRelayStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1.1.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "default" : "nonVolatile",
+            "description" :
+                """The storage type for this conceptual row.
+Conceptual rows having the value 'permanent(4)'
+need not allow write-access to any columnar
+objects in the row.""",
+        }, # column
+        "mplsLdpEntityFrameRelayRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1.1.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The status of this conceptual row.  All writable
+objects in this row may be modified at any time,
+however, as described in detail in the section
+entitled, 'Changing Values After Session
+Establishment', and again described in the
+DESCRIPTION clause of the
+mplsLdpEntityAdminStatus object,
+if a session has been initiated with a Peer,
+changing objects in this table will
+wreak havoc with the session and interrupt
+traffic.  To repeat again:
+the recommended procedure is to set the
+mplsLdpEntityAdminStatus to
+down, thereby explicitly causing a
+session to be torn down. Then,
+change objects in this entry, then set
+the mplsLdpEntityAdminStatus
+to enable which enables a new session
+to be initiated.""",
+        }, # column
+        "mplsLdpEntityFrameRelayLRTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1.1.2",
+            "status" : "current",
+            "description" :
+                """This table contains information about the
+
+
+Optional Parameters for the Frame Relay Session
+in the LDP Initialization Message, specifically
+it contains information about the Frame Relay
+Label Range Components.
+
+If the value of the object
+'mplsLdpEntityOptionalParameters' contains the
+value of 'frameRelaySessionParameters(3)' then
+there must be at least one corresponding entry
+in this table.""",
+        }, # table
+        "mplsLdpEntityFrameRelayLREntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1.1.2.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "mplsLdpEntityLdpId",
+                "mplsLdpEntityIndex",
+                "mplsLdpEntityFrameRelayLRMinDlci",
+            ],
+            "description" :
+                """An entry in this table represents the Frame Relay
+Label Range Component associated with the LDP entity.""",
+        }, # row
+        "mplsLdpEntityFrameRelayLRMinDlci" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1.1.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FRAME-RELAY-DTE-MIB", "name" : "DLCI"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The lower bound which is supported.  This value
+should be the same as that in the Frame Relay Label
+Range Component's Minimum DLCI field.  The value
+of zero is valid for the minimum DLCI field of
+the label.""",
+            "reference" :
+                """RFC3034, Use of Label Switching on Frame Relay
+Networks Specification.""",
+        }, # column
+        "mplsLdpEntityFrameRelayLRMaxDlci" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1.1.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FRAME-RELAY-DTE-MIB", "name" : "DLCI"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The upper bound which is supported.  This value
+should be the same as that in the Frame Relay Label
+Range Component's Maximum DLCI field.""",
+        }, # column
+        "mplsLdpEntityFrameRelayLRLen" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1.1.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "tenDlciBits" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "twentyThreeDlciBits" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object specifies the length of the DLCI bits.
+
+This is the EXACT value for the Len field of the
+Frame Relay Label Range Component.
+
+The description from rfc3036.txt is:
+
+'Len
+    This field specifies the number of bits of the DLCI.
+    The following values are supported:
+
+         Len    DLCI bits
+
+         0       10
+         2       23
+
+    Len values 1 and 3 are reserved.'
+
+ Please refer to the following reference for a complete
+ description of this feature.""",
+            "reference" :
+                """RFC3036, LDP Specification, Section 3.5.3
+Initialization Message.""",
+        }, # column
+        "mplsLdpEntityFrameRelayLRStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1.1.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "default" : "nonVolatile",
+            "description" :
+                """The storage type for this conceptual row.
+Conceptual rows having the value 'permanent(4)'
+need not allow write-access to any columnar
+objects in the row.""",
+        }, # column
+        "mplsLdpEntityFrameRelayLRRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1.1.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The status of this conceptual row.  All writable
+objects in this row may be modified at any time,
+however, as described in detail in the section
+entitled, 'Changing Values After Session
+Establishment', and again described in the
+DESCRIPTION clause of the
+mplsLdpEntityAdminStatus object,
+if a session has been initiated with a Peer,
+changing objects in this table will
+wreak havoc with the session and interrupt
+traffic.  To repeat again:
+the recommended procedure is to set the
+mplsLdpEntityAdminStatus to down, thereby
+explicitly causing a session to be torn down. Then,
+change objects in this entry, then set the
+mplsLdpEntityAdminStatus to enable which enables
+a new session to be initiated.""",
+        }, # column
+        "mplsLdpFrameRelaySessionObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1.2",
+        }, # node
+        "mplsLdpFrameRelaySessionTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1.2.1",
+            "status" : "current",
+            "description" :
+                """A table of Frame Relay label range intersections
+between the LDP Entities and LDP Peers.
+Each row represents a single label range intersection.
+
+NOTE:  this table cannot use the 'AUGMENTS'
+
+
+clause because there is not necessarily a one-to-one
+mapping between this table and the
+mplsLdpSessionTable.""",
+        }, # table
+        "mplsLdpFrameRelaySessionEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1.2.1.1",
+            "status" : "current",
+            "linkage" : [
+                "mplsLdpEntityLdpId",
+                "mplsLdpEntityIndex",
+                "mplsLdpPeerLdpId",
+                "mplsLdpFrameRelaySessionMinDlci",
+            ],
+            "description" :
+                """An entry in this table represents information on a
+single label range intersection between an
+LDP Entity and LDP Peer.
+
+The information contained in a row is read-only.""",
+        }, # row
+        "mplsLdpFrameRelaySessionMinDlci" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1.2.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FRAME-RELAY-DTE-MIB", "name" : "DLCI"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The lower bound of DLCIs which are supported.
+The value of zero is a valid value for the
+minimum DLCI field of the label.""",
+            "reference" :
+                """RFC3034, Use of Label Switching on Frame Relay
+Networks Specification.""",
+        }, # column
+        "mplsLdpFrameRelaySessionMaxDlci" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1.2.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"FRAME-RELAY-DTE-MIB", "name" : "DLCI"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The upper bound of DLCIs which are supported.""",
+        }, # column
+        "mplsLdpFrameRelaySessionLen" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.1.2.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "tenDlciBits" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "twentyThreeDlciBits" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """This object specifies the DLCI bits.""",
+        }, # column
+        "mplsLdpFrameRelayConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.2",
+        }, # node
+        "mplsLdpFrameRelayGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.2.1",
+        }, # node
+        "mplsLdpFrameRelayCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.2.2",
+        }, # node
+    }, # nodes
+
+    "groups" : {
+        "mplsLdpFrameRelayGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.2.1.1",
+            "status" : "current",
+            "members" : {
+                "mplsLdpEntityFrameRelayIfIndexOrZero" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB"
+                },
+                "mplsLdpEntityFrameRelayMergeCap" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB"
+                },
+                "mplsLdpEntityFrameRelayLRComponents" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB"
+                },
+                "mplsLdpEntityFrameRelayVcDirectionality" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB"
+                },
+                "mplsLdpEntityFrameRelayStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB"
+                },
+                "mplsLdpEntityFrameRelayRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB"
+                },
+                "mplsLdpEntityFrameRelayLRMaxDlci" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB"
+                },
+                "mplsLdpEntityFrameRelayLRLen" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB"
+                },
+                "mplsLdpEntityFrameRelayLRStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB"
+                },
+                "mplsLdpEntityFrameRelayLRRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB"
+                },
+                "mplsLdpFrameRelaySessionMaxDlci" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB"
+                },
+                "mplsLdpFrameRelaySessionLen" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Objects that apply to all MPLS LDP implementations
+using Frame Relay as the Layer 2.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "mplsLdpFrameRelayModuleFullCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.2.2.1",
+            "status" : "current",
+            "description" :
+                """The Module is implemented with support for
+read-create and read-write.  In other words,
+both monitoring and configuration
+are available when using this MODULE-COMPLIANCE.""",
+            "requires" : {
+                "mplsLdpFrameRelayGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB"
+                },
+            }, # requires
+            "refinements" : {
+                "mplsLdpEntityFrameRelayRowStatus" : {
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "writesyntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "createAndGo" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                            "destroy" : {
+                                "nodetype" : "namednumber",
+                                "number" : "6"
+                            },
+                        },
+                    }, # writesyntax
+                    "description" :
+                        """Support for createAndWait and notInService is not required.""",
+                },
+                "mplsLdpEntityFrameRelayLRRowStatus" : {
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "writesyntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "createAndGo" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                            "destroy" : {
+                                "nodetype" : "namednumber",
+                                "number" : "6"
+                            },
+                        },
+                    }, # writesyntax
+                    "description" :
+                        """Support for createAndWait and notInService is not required.""",
+                },
+            }, # refinements
+
+        }, # compliance
+        "mplsLdpFrameRelayModuleReadOnlyCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.6.2.2.2",
+            "status" : "current",
+            "description" :
+                """The Module is implemented with support for
+read-only.  In other words, only monitoring
+is available by implementing this MODULE-COMPLIANCE.""",
+            "requires" : {
+                "mplsLdpFrameRelayGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB"
+                },
+            }, # requires
+            "refinements" : {
+                "mplsLdpEntityFrameRelayIfIndexOrZero" : {
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityFrameRelayMergeCap" : {
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityFrameRelayVcDirectionality" : {
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityFrameRelayStorageType" : {
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityFrameRelayRowStatus" : {
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required, and active is the
+only status that needs to be supported.""",
+                },
+                "mplsLdpEntityFrameRelayLRMaxDlci" : {
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityFrameRelayLRLen" : {
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityFrameRelayLRStorageType" : {
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsLdpEntityFrameRelayLRRowStatus" : {
+                    "module" : "MPLS-LDP-FRAME-RELAY-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required, and active is the
+only status that needs to be supported.""",
+                },
+            }, # refinements
+
+        }, # compliance
+    }, # compliances
+
+}