logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/MPLS-L3VPN-STD-MIB.dic

@@ -0,0 +1,2548 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python MPLS-L3VPN-STD-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/MPLS-L3VPN-STD-MIB"
+
+MIB = {
+    "moduleName" : "MPLS-L3VPN-STD-MIB",
+
+    "MPLS-L3VPN-STD-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """IETF Layer-3 Virtual Private
+Networks Working Group.""",
+        "contact" : 
+            """        Thomas D. Nadeau
+tnadeau@cisco.com
+
+Harmen van der Linde
+havander@cisco.com
+
+Comments and discussion to l3vpn@ietf.org""",
+        "description" :
+            """This MIB contains managed object definitions for the
+Layer-3 Multiprotocol Label Switching Virtual
+Private Networks.
+
+Copyright (C) The Internet Society (2006).  This
+version of this MIB module is part of RFC4382; see
+the RFC itself for full legal notices.""",
+        "revisions" : (
+            {
+                "date" : "2006-01-23 00:00",
+                "description" :
+                    """Initial version.  Published as RFC 4382.""",
+            },
+        ),
+        "identity node" : "mplsL3VpnMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "NOTIFICATION-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter32"},
+        {"module" : "SNMPv2-SMI", "name" : "Unsigned32"},
+        {"module" : "SNMPv2-SMI", "name" : "Gauge32"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "SNMPv2-CONF", "name" : "NOTIFICATION-GROUP"},
+        {"module" : "SNMPv2-TC", "name" : "TEXTUAL-CONVENTION"},
+        {"module" : "SNMPv2-TC", "name" : "TruthValue"},
+        {"module" : "SNMPv2-TC", "name" : "RowStatus"},
+        {"module" : "SNMPv2-TC", "name" : "TimeStamp"},
+        {"module" : "SNMPv2-TC", "name" : "StorageType"},
+        {"module" : "IF-MIB", "name" : "InterfaceIndex"},
+        {"module" : "IF-MIB", "name" : "InterfaceIndexOrZero"},
+        {"module" : "VPN-TC-STD-MIB", "name" : "VPNIdOrZero"},
+        {"module" : "SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+        {"module" : "IANA-RTPROTO-MIB", "name" : "IANAipRouteProtocol"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetAddress"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetAddressType"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetAddressPrefixLength"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetAutonomousSystemNumber"},
+        {"module" : "MPLS-TC-STD-MIB", "name" : "mplsStdMIB"},
+        {"module" : "MPLS-LSR-STD-MIB", "name" : "MplsIndexType"},
+    ),
+
+    "typedefs" : {
+        "MplsL3VpnName" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "31"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "31"
+            },
+            "description" :
+                """An identifier that is assigned to each MPLS/BGP VPN and
+is used to uniquely identify it.  This is assigned by the
+system operator or NMS and SHOULD be unique throughout
+the MPLS domain.  If this is the case, then this identifier
+can then be used at any LSR within a specific MPLS domain
+to identify this MPLS/BGP VPN.  It may also be possible to
+preserve the uniqueness of this identifier across MPLS
+domain boundaries, in which case this identifier can then
+be used to uniquely identify MPLS/BGP VPNs on a more global
+basis.  This object MAY be set to the VPN ID as defined in
+RFC 2685.""",
+            "reference" :
+                """RFC 2685 Fox B., et al, 'Virtual Private
+
+
+
+Networks Identifier', September 1999.""",
+        },
+        "MplsL3VpnRouteDistinguisher" : {
+            "basetype" : "OctetString",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "256"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "256"
+            },
+            "description" :
+                """Syntax for a route distinguisher and route target
+as defined in [RFC4364].""",
+            "reference" :
+                """[RFC4364]""",
+        },
+        "MplsL3VpnRtType" : {
+            "basetype" : "Enumeration",
+            "status" : "current",
+            "import" : {
+                "nodetype" : "namednumber",
+                "number" : "1"
+            },
+            "export" : {
+                "nodetype" : "namednumber",
+                "number" : "2"
+            },
+            "both" : {
+                "nodetype" : "namednumber",
+                "number" : "3"
+            },
+            "description" :
+                """Used to define the type of a route target usage.
+Route targets can be specified to be imported,
+exported, or both.  For a complete definition of a
+route target, see [RFC4364].""",
+            "reference" :
+                """[RFC4364]""",
+        },
+    }, # typedefs
+
+    "nodes" : {
+        "mplsL3VpnMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11",
+            "status" : "current",
+        }, # node
+        "mplsL3VpnNotifications" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.0",
+        }, # node
+        "mplsL3VpnObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1",
+        }, # node
+        "mplsL3VpnScalars" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.1",
+        }, # node
+        "mplsL3VpnConfiguredVrfs" : {
+            "nodetype" : "scalar",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of VRFs that are configured on this node.""",
+        }, # scalar
+        "mplsL3VpnActiveVrfs" : {
+            "nodetype" : "scalar",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Gauge32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of VRFs that are active on this node.
+That is, those VRFs whose corresponding mplsL3VpnVrfOperStatus
+object value is equal to operational (1).""",
+        }, # scalar
+        "mplsL3VpnConnectedInterfaces" : {
+            "nodetype" : "scalar",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Gauge32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Total number of interfaces connected to a VRF.""",
+        }, # scalar
+        "mplsL3VpnNotificationEnable" : {
+            "nodetype" : "scalar",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TruthValue"},
+            },
+            "access" : "readwrite",
+            "default" : "false",
+            "description" :
+                """If this object is true, then it enables the
+generation of all notifications defined in
+this MIB.  This object's value should be
+preserved across agent reboots.""",
+            "reference" :
+                """See also [RFC3413] for explanation that
+notifications are under the ultimate control of the
+MIB modules in this document.""",
+        }, # scalar
+        "mplsL3VpnVrfConfMaxPossRts" : {
+            "nodetype" : "scalar",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Denotes maximum number of routes that the device
+will allow all VRFs jointly to hold.  If this value is
+set to 0, this indicates that the device is
+unable to determine the absolute maximum.  In this
+case, the configured maximum MAY not actually
+be allowed by the device.""",
+        }, # scalar
+        "mplsL3VpnVrfConfRteMxThrshTime" : {
+            "nodetype" : "scalar",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "default" : "0",
+            "units" : "seconds",
+            "description" :
+                """Denotes the interval in seconds, at which the route max threshold
+notification may be reissued after the maximum value has been
+exceeded (or has been reached if mplsL3VpnVrfConfMaxRoutes and
+mplsL3VpnVrfConfHighRteThresh are equal) and the initial
+notification has been issued.  This value is intended to prevent
+continuous generation of notifications by an agent in the event
+that routes are continually added to a VRF after it has reached
+its maximum value.  If this value is set to 0, the agent should
+only issue a single notification at the time that the maximum
+threshold has been reached, and should not issue any more
+notifications until the value of routes has fallen below the
+configured threshold value.  This is the recommended default
+behavior.""",
+        }, # scalar
+        "mplsL3VpnIllLblRcvThrsh" : {
+            "nodetype" : "scalar",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The number of illegally received labels above which
+the mplsNumVrfSecIllglLblThrshExcd notification
+is issued.  The persistence of this value mimics
+that of the device's configuration.""",
+        }, # scalar
+        "mplsL3VpnConf" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2",
+        }, # node
+        "mplsL3VpnIfConfTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.1",
+            "status" : "current",
+            "description" :
+                """This table specifies per-interface MPLS capability
+and associated information.""",
+        }, # table
+        "mplsL3VpnIfConfEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.1.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "mplsL3VpnVrfName",
+                "mplsL3VpnIfConfIndex",
+            ],
+            "description" :
+                """An entry in this table is created by an LSR for
+every interface capable of supporting MPLS L3VPN.
+Each entry in this table is meant to correspond to
+an entry in the Interfaces Table.""",
+        }, # row
+        "mplsL3VpnIfConfIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "InterfaceIndex"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This is a unique index for an entry in the
+mplsL3VpnIfConfTable.  A non-zero index for an
+entry indicates the ifIndex for the corresponding
+interface entry in the MPLS-VPN-layer in the ifTable.
+Note that this table does not necessarily correspond
+one-to-one with all entries in the Interface MIB
+having an ifType of MPLS-layer; rather, only those
+that are enabled for MPLS L3VPN functionality.""",
+            "reference" :
+                """RFC2863""",
+        }, # column
+        "mplsL3VpnIfVpnClassification" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "carrierOfCarrier" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "enterprise" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "interProvider" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "enterprise",
+            "description" :
+                """Denotes whether this link participates in a
+carrier's carrier, enterprise, or inter-provider
+scenario.""",
+        }, # column
+        "mplsL3VpnIfVpnRouteDistProtocol" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Bits",
+                    "none" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "bgp" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "ospf" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "rip" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "isis" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "static" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                    "other" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """Denotes the route distribution protocol across the
+PE-CE link.  Note that more than one routing protocol
+may be enabled at the same time; thus, this object is
+specified as a bitmask.  For example, static(5) and
+ospf(2) are a typical configuration.""",
+        }, # column
+        "mplsL3VpnIfConfStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "default" : "volatile",
+            "description" :
+                """The storage type for this VPN If entry.
+Conceptual rows having the value 'permanent'
+need not allow write access to any columnar
+objects in the row.""",
+            "reference" :
+                """See RFC2579.""",
+        }, # column
+        "mplsL3VpnIfConfRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This variable is used to create, modify, and/or
+delete a row in this table.  Rows in this
+table signify that the specified interface is
+associated with this VRF.  If the row creation
+operation succeeds, the interface will have been
+associated with the specified VRF, otherwise the
+agent MUST not allow the association.  If the agent
+only allows read-only operations on this table, it
+MUST create entries in this table as they are created
+on the device.  When a row in this table is in
+active(1) state, no objects in that row can be
+modified except mplsL3VpnIfConfStorageType and
+mplsL3VpnIfConfRowStatus.""",
+        }, # column
+        "mplsL3VpnVrfTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.2",
+            "status" : "current",
+            "description" :
+                """This table specifies per-interface MPLS L3VPN
+VRF Table capability and associated information.
+Entries in this table define VRF routing instances
+associated with MPLS/VPN interfaces.  Note that
+multiple interfaces can belong to the same VRF
+instance.  The collection of all VRF instances
+comprises an actual VPN.""",
+        }, # table
+        "mplsL3VpnVrfEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.2.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "mplsL3VpnVrfName",
+            ],
+            "description" :
+                """An entry in this table is created by an LSR for
+every VRF capable of supporting MPLS L3VPN.  The
+indexing provides an ordering of VRFs per-VPN
+interface.""",
+        }, # row
+        "mplsL3VpnVrfName" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.2.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-L3VPN-STD-MIB", "name" : "MplsL3VpnName"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The human-readable name of this VPN.  This MAY
+be equivalent to the [RFC2685] VPN-ID, but may
+also vary.  If it is set to the VPN ID, it MUST
+be equivalent to the value of mplsL3VpnVrfVpnId.
+It is strongly recommended that all sites supporting
+VRFs that are part of the same VPN use the same
+naming convention for VRFs as well as the same VPN
+ID.""",
+            "reference" :
+                """[RFC2685]""",
+        }, # column
+        "mplsL3VpnVrfVpnId" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.2.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"VPN-TC-STD-MIB", "name" : "VPNIdOrZero"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The VPN ID as specified in [RFC2685].  If a VPN ID
+has not been specified for this VRF, then this
+variable SHOULD be set to a zero-length OCTET
+STRING.""",
+        }, # column
+        "mplsL3VpnVrfDescription" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.2.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """The human-readable description of this VRF.""",
+        }, # column
+        "mplsL3VpnVrfRD" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.2.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-L3VPN-STD-MIB", "name" : "MplsL3VpnRouteDistinguisher"},
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """The route distinguisher for this VRF.""",
+        }, # column
+        "mplsL3VpnVrfCreationTime" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.2.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The time at which this VRF entry was created.""",
+        }, # column
+        "mplsL3VpnVrfOperStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.2.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "up" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "down" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readonly",
+            "description" :
+                """Denotes whether or not a VRF is operational.  A VRF is
+up(1) when there is at least one interface associated
+with the VRF whose ifOperStatus is up(1).  A VRF is
+down(2) when:
+a. There does not exist at least one interface whose
+   ifOperStatus is up(1).
+b. There are no interfaces associated with the VRF.""",
+        }, # column
+        "mplsL3VpnVrfActiveInterfaces" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.2.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Gauge32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Total number of interfaces connected to this VRF with
+ifOperStatus = up(1).
+
+This value should increase when an interface is associated
+with the corresponding VRF and its corresponding ifOperStatus
+is equal to up(1).  If an interface is associated whose
+ifOperStatus is not up(1), then the value is not incremented
+until such time as it transitions to this state.
+
+This value should be decremented when an interface is
+disassociated with a VRF or the corresponding ifOperStatus
+transitions out of the up(1) state to any other state.""",
+        }, # column
+        "mplsL3VpnVrfAssociatedInterfaces" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.2.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Total number of interfaces connected to this VRF
+(independent of ifOperStatus type).""",
+        }, # column
+        "mplsL3VpnVrfConfMidRteThresh" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.2.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """Denotes mid-level water marker for the number
+of routes that this VRF may hold.""",
+        }, # column
+        "mplsL3VpnVrfConfHighRteThresh" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.2.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """Denotes high-level water marker for the number of
+routes that this VRF may hold.""",
+        }, # column
+        "mplsL3VpnVrfConfMaxRoutes" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.2.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "Unsigned32"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """Denotes maximum number of routes that this VRF is
+configured to hold.  This value MUST be less than or
+equal to mplsL3VpnVrfConfMaxPossRts unless it is set
+to 0.""",
+        }, # column
+        "mplsL3VpnVrfConfLastChanged" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.2.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime at the time of the last
+change of this table entry, which includes changes of
+VRF parameters defined in this table or addition or
+deletion of interfaces associated with this VRF.""",
+        }, # column
+        "mplsL3VpnVrfConfRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.2.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This variable is used to create, modify, and/or
+delete a row in this table.
+
+
+
+
+When a row in this table is in active(1) state, no
+objects in that row can be modified except
+mplsL3VpnVrfConfAdminStatus, mplsL3VpnVrfConfRowStatus,
+and mplsL3VpnVrfConfStorageType.""",
+        }, # column
+        "mplsL3VpnVrfConfAdminStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.2.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "up" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "down" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "testing" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """Indicates the desired operational status of this
+VRF.""",
+        }, # column
+        "mplsL3VpnVrfConfStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.2.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "default" : "volatile",
+            "description" :
+                """The storage type for this VPN VRF entry.
+Conceptual rows having the value 'permanent'
+need not allow write access to any columnar
+objects in the row.""",
+            "reference" :
+                """See RFC2579.""",
+        }, # column
+        "mplsL3VpnVrfRTTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.3",
+            "status" : "current",
+            "description" :
+                """This table specifies per-VRF route target association.
+Each entry identifies a connectivity policy supported
+as part of a VPN.""",
+        }, # table
+        "mplsL3VpnVrfRTEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.3.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "mplsL3VpnVrfName",
+                "mplsL3VpnVrfRTIndex",
+                "mplsL3VpnVrfRTType",
+            ],
+            "description" :
+                """An entry in this table is created by an LSR for
+each route target configured for a VRF supporting
+a MPLS L3VPN instance.  The indexing provides an
+ordering per-VRF instance.  See [RFC4364] for a
+complete definition of a route target.""",
+        }, # row
+        "mplsL3VpnVrfRTIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "ranges" : [
+                    {
+                        "min" : "1",
+                        "max" : "4294967295"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "1",
+                        "max" : "4294967295"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """Auxiliary index for route targets configured for a
+particular VRF.""",
+        }, # column
+        "mplsL3VpnVrfRTType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-L3VPN-STD-MIB", "name" : "MplsL3VpnRtType"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The route target distribution type.""",
+        }, # column
+        "mplsL3VpnVrfRT" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.3.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-L3VPN-STD-MIB", "name" : "MplsL3VpnRouteDistinguisher"},
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """The route target distribution policy.""",
+        }, # column
+        "mplsL3VpnVrfRTDescr" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.3.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+            },
+            "access" : "readwrite",
+            "default" : "",
+            "description" :
+                """Description of the route target.""",
+        }, # column
+        "mplsL3VpnVrfRTRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.3.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This variable is used to create, modify, and/or
+delete a row in this table.  When a row in this
+table is in active(1) state, no objects in that row
+can be modified except mplsL3VpnVrfRTRowStatus.""",
+        }, # column
+        "mplsL3VpnVrfRTStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.3.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "default" : "volatile",
+            "description" :
+                """The storage type for this VPN route target (RT) entry.
+Conceptual rows having the value 'permanent'
+need not allow write access to any columnar
+objects in the row.""",
+            "reference" :
+                """See RFC2579.""",
+        }, # column
+        "mplsL3VpnVrfSecTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.6",
+            "status" : "current",
+            "description" :
+                """This table specifies per MPLS L3VPN VRF Table
+security-related counters.""",
+        }, # table
+        "mplsL3VpnVrfSecEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.6.1",
+            "status" : "current",
+            "linkage" : [
+                { "MPLS-L3VPN-STD-MIB" : {
+                    "indexkind" : "augments",
+                    "relatedNode" : "mplsL3VpnVrfEntry",
+                }},
+            ],
+            "description" :
+                """An entry in this table is created by an LSR for
+every VRF capable of supporting MPLS L3VPN.  Each
+entry in this table is used to indicate security-related
+information for each VRF entry.""",
+        }, # row
+        "mplsL3VpnVrfSecIllegalLblVltns" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.6.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Indicates the number of illegally received
+labels on this VPN/VRF.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by the value of
+mplsL3VpnVrfSecDiscontinuityTime.""",
+        }, # column
+        "mplsL3VpnVrfSecDiscontinuityTime" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.2.6.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime on the most recent occasion at
+which any one or more of this entry's counters suffered
+a discontinuity.  If no such discontinuities have
+occurred since the last re-initialization of the local
+management subsystem, then this object contains a zero
+value.""",
+        }, # column
+        "mplsL3VpnPerf" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.3",
+        }, # node
+        "mplsL3VpnVrfPerfTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.3.1",
+            "status" : "current",
+            "description" :
+                """This table specifies per MPLS L3VPN VRF Table performance
+
+
+
+information.""",
+        }, # table
+        "mplsL3VpnVrfPerfEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.3.1.1",
+            "status" : "current",
+            "linkage" : [
+                { "MPLS-L3VPN-STD-MIB" : {
+                    "indexkind" : "augments",
+                    "relatedNode" : "mplsL3VpnVrfEntry",
+                }},
+            ],
+            "description" :
+                """An entry in this table is created by an LSR for
+every VRF capable of supporting MPLS L3VPN.""",
+        }, # row
+        "mplsL3VpnVrfPerfRoutesAdded" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.3.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Indicates the number of routes added to this VPN/VRF
+since the last discontinuity.  Discontinuities in
+the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by the value of
+mplsL3VpnVrfPerfDiscTime.""",
+        }, # column
+        "mplsL3VpnVrfPerfRoutesDeleted" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.3.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Indicates the number of routes removed from this VPN/VRF.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by the value of
+mplsL3VpnVrfPerfDiscTime.""",
+        }, # column
+        "mplsL3VpnVrfPerfCurrNumRoutes" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.3.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Gauge32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Indicates the number of routes currently used by this
+VRF.""",
+        }, # column
+        "mplsL3VpnVrfPerfRoutesDropped" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.3.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This counter should be incremented when the number of routes
+contained by the specified VRF exceeds or attempts to exceed
+the maximum allowed value as indicated by
+mplsL3VpnVrfMaxRouteThreshold.
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by the value of
+mplsL3VpnVrfPerfDiscTime.""",
+        }, # column
+        "mplsL3VpnVrfPerfDiscTime" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.3.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime on the most recent occasion at
+which any one or more of this entry's counters suffered
+a discontinuity.  If no such discontinuities have
+occurred since the last re-initialization of the local
+management subsystem, then this object contains a zero
+value.""",
+        }, # column
+        "mplsL3VpnRoute" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.4",
+        }, # node
+        "mplsL3VpnVrfRteTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.4.1",
+            "status" : "current",
+            "description" :
+                """This table specifies per-interface MPLS L3VPN VRF Table
+routing information.  Entries in this table define VRF routing
+entries associated with the specified MPLS/VPN interfaces.  Note
+
+
+
+that this table contains both BGP and Interior Gateway Protocol
+IGP routes, as both may appear in the same VRF.""",
+            "reference" :
+                """[RFC2096]""",
+        }, # table
+        "mplsL3VpnVrfRteEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.4.1.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "mplsL3VpnVrfName",
+                "mplsL3VpnVrfRteInetCidrDestType",
+                "mplsL3VpnVrfRteInetCidrDest",
+                "mplsL3VpnVrfRteInetCidrPfxLen",
+                "mplsL3VpnVrfRteInetCidrPolicy",
+                "mplsL3VpnVrfRteInetCidrNHopType",
+                "mplsL3VpnVrfRteInetCidrNextHop",
+            ],
+            "description" :
+                """An entry in this table is created by an LSR for every route
+present configured (either dynamically or statically) within
+the context of a specific VRF capable of supporting MPLS/BGP
+VPN.  The indexing provides an ordering of VRFs per-VPN
+interface.
+
+Implementers need to be aware that there are quite a few
+index objects that together can exceed the size allowed
+for an Object Identifier (OID).  So implementers must make
+sure that OIDs of column instances in this table will have
+no more than 128 sub-identifiers, otherwise they cannot be
+accessed using SNMPv1, SNMPv2c, or SNMPv3.""",
+        }, # row
+        "mplsL3VpnVrfRteInetCidrDestType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.4.1.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddressType"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The type of the mplsL3VpnVrfRteInetCidrDest address, as
+defined in the InetAddress MIB.
+
+Only those address types that may appear in an actual
+routing table are allowed as values of this object.""",
+            "reference" :
+                """RFC4001""",
+        }, # column
+        "mplsL3VpnVrfRteInetCidrDest" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.4.1.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddress"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The destination IP address of this route.
+
+The type of this address is determined by the value of
+the mplsL3VpnVrfRteInetCidrDestType object.
+
+The values for the index objects
+mplsL3VpnVrfRteInetCidrDest and
+mplsL3VpnVrfRteInetCidrPfxLen must be consistent.  When
+the value of mplsL3VpnVrfRteInetCidrDest is x, then
+the bitwise logical-AND of x with the value of the mask
+formed from the corresponding index object
+mplsL3VpnVrfRteInetCidrPfxLen MUST be
+equal to x.  If not, then the index pair is not
+consistent and an inconsistentName error must be
+returned on SET or CREATE requests.""",
+        }, # column
+        "mplsL3VpnVrfRteInetCidrPfxLen" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.4.1.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Unsigned32",
+                    "parent module" : {
+                        "name" : "INET-ADDRESS-MIB",
+                        "type" : "InetAddressPrefixLength",
+                    },
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "128"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "128"
+                    },
+                },
+            },
+            "access" : "noaccess",
+            "description" :
+                """Indicates the number of leading one bits that form the
+
+
+
+mask to be logical-ANDed with the destination address
+before being compared to the value in the
+mplsL3VpnVrfRteInetCidrDest field.
+
+The values for the index objects
+mplsL3VpnVrfRteInetCidrDest and
+mplsL3VpnVrfRteInetCidrPfxLen must be consistent.  When
+the value of mplsL3VpnVrfRteInetCidrDest is x, then the
+bitwise logical-AND of x with the value of the mask
+formed from the corresponding index object
+mplsL3VpnVrfRteInetCidrPfxLen MUST be
+equal to x.  If not, then the index pair is not
+consistent and an inconsistentName error must be
+returned on SET or CREATE requests.""",
+        }, # column
+        "mplsL3VpnVrfRteInetCidrPolicy" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.4.1.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"", "name" : "ObjectIdentifier"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This object is an opaque object without any defined
+semantics.  Its purpose is to serve as an additional
+index that may delineate between multiple entries to
+the same destination.  The value { 0 0 } shall be used
+as the default value for this object.""",
+        }, # column
+        "mplsL3VpnVrfRteInetCidrNHopType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.4.1.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddressType"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The type of the mplsL3VpnVrfRteInetCidrNextHop address,
+as defined in the InetAddress MIB.
+
+Value should be set to unknown(0) for non-remote
+routes.
+
+Only those address types that may appear in an actual
+routing table are allowed as values of this object.""",
+            "reference" :
+                """RFC4001""",
+        }, # column
+        "mplsL3VpnVrfRteInetCidrNextHop" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.4.1.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddress"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """On remote routes, the address of the next system en
+route.  For non-remote routes, a zero-length string.
+The type of this address is determined by the value of
+the mplsL3VpnVrfRteInetCidrNHopType object.""",
+        }, # column
+        "mplsL3VpnVrfRteInetCidrIfIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.4.1.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "InterfaceIndexOrZero"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """The ifIndex value that identifies the local interface
+through which the next hop of this route should be
+reached.  A value of 0 is valid and represents the
+scenario where no interface is specified.""",
+        }, # column
+        "mplsL3VpnVrfRteInetCidrType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.4.1.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "other" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "reject" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "local" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "remote" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "blackhole" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "other",
+            "description" :
+                """The type of route.  Note that local(3) refers to a
+route for which the next hop is the final destination;
+remote(4) refers to a route for which the next hop is
+not the final destination.
+
+Routes that do not result in traffic forwarding or
+rejection should not be displayed even if the
+implementation keeps them stored internally.
+
+reject(2) refers to a route that, if matched, discards
+the message as unreachable and returns a notification
+(e.g., ICMP error) to the message sender.  This is used
+in some protocols as a means of correctly aggregating
+routes.
+
+blackhole(5) refers to a route that, if matched,
+
+
+
+discards the message silently.""",
+        }, # column
+        "mplsL3VpnVrfRteInetCidrProto" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.4.1.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IANA-RTPROTO-MIB", "name" : "IANAipRouteProtocol"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The routing mechanism via which this route was learned.
+Inclusion of values for gateway routing protocols is
+not intended to imply that hosts should support those
+protocols.""",
+        }, # column
+        "mplsL3VpnVrfRteInetCidrAge" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.4.1.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Gauge32"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The number of seconds since this route was last updated
+or otherwise determined to be correct.  Note that no
+semantics of 'too old' can be implied except through
+knowledge of the routing protocol by which the route
+was learned.""",
+        }, # column
+        "mplsL3VpnVrfRteInetCidrNextHopAS" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.4.1.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAutonomousSystemNumber"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """The Autonomous System Number of the next hop.  The
+semantics of this object are determined by the
+routing protocol specified in the route's
+mplsL3VpnVrfRteInetCidrProto value.  When this
+object is unknown or not relevant, its value should
+be set to zero.""",
+        }, # column
+        "mplsL3VpnVrfRteInetCidrMetric1" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.4.1.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "-1",
+            "description" :
+                """The primary routing metric for this route.  The
+semantics of this metric are determined by the
+
+
+
+routing protocol specified in the route's
+mplsL3VpnVrfRteInetCidrProto value.  If this
+metric is not used, its value should be set to
+-1.""",
+        }, # column
+        "mplsL3VpnVrfRteInetCidrMetric2" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.4.1.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "-1",
+            "description" :
+                """An alternate routing metric for this route.  The
+semantics of this metric are determined by the routing
+protocol specified in the route's
+mplsL3VpnVrfRteInetCidrProto
+value.  If this metric is not used, its value should be
+set to -1.""",
+        }, # column
+        "mplsL3VpnVrfRteInetCidrMetric3" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.4.1.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "-1",
+            "description" :
+                """An alternate routing metric for this route.  The
+semantics of this metric are determined by the routing
+protocol specified in the route's
+mplsL3VpnVrfRteInetCidrProto
+value.  If this metric is not used, its value should be
+set to -1.""",
+        }, # column
+        "mplsL3VpnVrfRteInetCidrMetric4" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.4.1.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "-1",
+            "description" :
+                """An alternate routing metric for this route.  The
+semantics of this metric are determined by the routing
+protocol specified in the route's
+mplsL3VpnVrfRteInetCidrProto value.  If this metric
+is not used, its value should be set to -1.""",
+        }, # column
+        "mplsL3VpnVrfRteInetCidrMetric5" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.4.1.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "-1",
+                        "max" : "2147483647"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "-1",
+                        "max" : "2147483647"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "-1",
+            "description" :
+                """An alternate routing metric for this route.  The
+semantics of this metric are determined by the routing
+protocol specified in the route's
+mplsL3VpnVrfRteInetCidrProto value.  If this metric is
+not used, its value should be set to -1.""",
+        }, # column
+        "mplsL3VpnVrfRteXCPointer" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.4.1.1.17",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-LSR-STD-MIB", "name" : "MplsIndexType"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Index into mplsXCTable that identifies which cross-
+connect entry is associated with this VRF route entry
+by containing the mplsXCIndex of that cross-connect entry.
+The string containing the single-octet 0x00 indicates that
+a label stack is not associated with this route entry.  This
+can be the case because the label bindings have not yet
+been established, or because some change in the agent has
+removed them.
+
+When the label stack associated with this VRF route is created,
+it MUST establish the associated cross-connect
+entry in the mplsXCTable and then set that index to the value
+of this object.  Changes to the cross-connect object in the
+mplsXCTable MUST automatically be reflected in the value of
+this object.  If this object represents a static routing entry,
+then the manager must ensure that this entry is maintained
+consistently in the corresponding mplsXCTable as well.""",
+            "reference" :
+                """RFC 3813 - Multiprotocol Label Switching (MPLS) Label Switching
+Router (LSR) Management Information base (MIB), C. Srinivasan,
+A. Vishwanathan, and T. Nadeau, June 2004""",
+        }, # column
+        "mplsL3VpnVrfRteInetCidrStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.1.4.1.1.18",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The row status variable, used according to row
+installation and removal conventions.
+
+
+
+A row entry cannot be modified when the status is
+marked as active(1).""",
+        }, # column
+        "mplsL3VpnConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.2",
+        }, # node
+        "mplsL3VpnGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.2.1",
+        }, # node
+        "mplsL3VpnCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.2.2",
+        }, # node
+    }, # nodes
+
+    "notifications" : {
+        "mplsL3VpnVrfUp" : {
+            "nodetype" : "notification",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.0.1",
+            "status" : "current",
+            "objects" : {
+                "mplsL3VpnIfConfRowStatus" : {
+                    "nodetype" : "object",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfOperStatus" : {
+                    "nodetype" : "object",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+            },
+            "description" :
+                """This notification is generated when:
+a. No interface is associated with this VRF, and the first
+   (and only first) interface associated with it has its
+   ifOperStatus change to up(1).
+
+b. One interface is associated with this VRF, and
+   the ifOperStatus of this interface changes to up(1).
+
+c. Multiple interfaces are associated with this VRF, and the
+   ifOperStatus of all interfaces is down(2), and the first
+   of those interfaces has its ifOperStatus change to up(1).""",
+        }, # notification
+        "mplsL3VpnVrfDown" : {
+            "nodetype" : "notification",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.0.2",
+            "status" : "current",
+            "objects" : {
+                "mplsL3VpnIfConfRowStatus" : {
+                    "nodetype" : "object",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfOperStatus" : {
+                    "nodetype" : "object",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+            },
+            "description" :
+                """This notification is generated when:
+a. One interface is associated with this VRF, and
+   the ifOperStatus of this interface changes from up(1)
+   to down(2).
+
+b. Multiple interfaces are associated with this VRF, and
+   the ifOperStatus of all except one of these interfaces is
+   equal to up(1), and the ifOperStatus of that interface
+   changes from up(1) to down(2).
+
+c. The last interface with ifOperStatus equal to up(1)
+   is disassociated from a VRF.""",
+        }, # notification
+        "mplsL3VpnVrfRouteMidThreshExceeded" : {
+            "nodetype" : "notification",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.0.3",
+            "status" : "current",
+            "objects" : {
+                "mplsL3VpnVrfPerfCurrNumRoutes" : {
+                    "nodetype" : "object",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfConfMidRteThresh" : {
+                    "nodetype" : "object",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+            },
+            "description" :
+                """This notification is generated when the number of routes
+contained by the specified VRF exceeds the value indicated by
+mplsL3VpnVrfMidRouteThreshold.  A single notification MUST be
+generated when this threshold is exceeded, and no other
+notifications of this type should be issued until the value
+of mplsL3VpnVrfPerfCurrNumRoutes has fallen below that of
+mplsL3VpnVrfConfMidRteThresh.""",
+        }, # notification
+        "mplsL3VpnVrfNumVrfRouteMaxThreshExceeded" : {
+            "nodetype" : "notification",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.0.4",
+            "status" : "current",
+            "objects" : {
+                "mplsL3VpnVrfPerfCurrNumRoutes" : {
+                    "nodetype" : "object",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfConfHighRteThresh" : {
+                    "nodetype" : "object",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+            },
+            "description" :
+                """This notification is generated when the number of routes
+contained by the specified VRF exceeds or attempts to exceed
+the maximum allowed value as indicated by
+mplsL3VpnVrfMaxRouteThreshold.  In cases where
+mplsL3VpnVrfConfHighRteThresh is set to the same value
+as mplsL3VpnVrfConfMaxRoutes, mplsL3VpnVrfConfHighRteThresh
+need not be exceeded; rather, just reached for this notification
+to be issued.
+
+Note that mplsL3VpnVrfConfRteMxThrshTime denotes the interval
+at which the this notification will be reissued after the
+maximum value has been exceeded (or reached if
+mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are
+equal) and the initial notification has been issued.  This value
+is intended to prevent continuous generation of notifications by
+an agent in the event that routes are continually added to a VRF
+after it has reached its maximum value.  The default value is 0
+minutes.  If this value is set to 0, the agent should only issue
+a single notification at the time that the maximum threshold has
+been reached, and should not issue any more notifications until
+the value of routes has fallen below the configured threshold
+value.""",
+        }, # notification
+        "mplsL3VpnNumVrfSecIllglLblThrshExcd" : {
+            "nodetype" : "notification",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.0.5",
+            "status" : "current",
+            "objects" : {
+                "mplsL3VpnVrfSecIllegalLblVltns" : {
+                    "nodetype" : "object",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+            },
+            "description" :
+                """This notification is generated when the number of illegal
+label violations on a VRF as indicated by
+
+
+
+mplsL3VpnVrfSecIllegalLblVltns has exceeded
+mplsL3VpnIllLblRcvThrsh.  The threshold is not
+included in the varbind here because the value of
+mplsL3VpnVrfSecIllegalLblVltns should be one greater than
+the threshold at the time this notification is issued.""",
+        }, # notification
+        "mplsL3VpnNumVrfRouteMaxThreshCleared" : {
+            "nodetype" : "notification",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.0.6",
+            "status" : "current",
+            "objects" : {
+                "mplsL3VpnVrfPerfCurrNumRoutes" : {
+                    "nodetype" : "object",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfConfHighRteThresh" : {
+                    "nodetype" : "object",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+            },
+            "description" :
+                """This notification is generated only after the number of routes
+contained by the specified VRF exceeds or attempts to exceed
+the maximum allowed value as indicated by
+mplsVrfMaxRouteThreshold, and then falls below this value.  The
+emission of this notification informs the operator that the
+error condition has been cleared without the operator having to
+query the device.
+
+Note that mplsL3VpnVrfConfRteMxThrshTime denotes the interval at
+which the mplsNumVrfRouteMaxThreshExceeded notification will
+be reissued after the maximum value has been exceeded (or
+reached if mplsL3VpnVrfConfMaxRoutes and
+mplsL3VpnVrfConfHighRteThresh are equal) and the initial
+notification has been issued.  Therefore,
+the generation of this notification should also be emitted with
+this same frequency (assuming that the error condition is
+cleared).  Specifically, if the error condition is reached and
+cleared several times during the period of time specified in
+mplsL3VpnVrfConfRteMxThrshTime, only a single notification will
+be issued to indicate the first instance of the error condition
+as well as the first time the error condition is cleared.
+This behavior is intended to prevent continuous generation of
+notifications by an agent in the event that routes are
+continually added and removed to/from a VRF after it has
+reached its maximum value.  The default value is 0.  If this
+value is set to 0, the agent should issue a notification
+whenever the maximum threshold has been cleared.""",
+        }, # notification
+    }, # notifications
+
+    "groups" : {
+        "mplsL3VpnScalarGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.2.1.1",
+            "status" : "current",
+            "members" : {
+                "mplsL3VpnConfiguredVrfs" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnActiveVrfs" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnConnectedInterfaces" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnNotificationEnable" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfConfMaxPossRts" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfConfRteMxThrshTime" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnIllLblRcvThrsh" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Collection of scalar objects required for MPLS VPN
+management.""",
+        }, # group
+        "mplsL3VpnVrfGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.2.1.2",
+            "status" : "current",
+            "members" : {
+                "mplsL3VpnVrfVpnId" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfDescription" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfRD" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfCreationTime" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfOperStatus" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfActiveInterfaces" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfAssociatedInterfaces" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfConfMidRteThresh" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfConfHighRteThresh" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfConfMaxRoutes" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfConfLastChanged" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfConfRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfConfAdminStatus" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfConfStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Collection of objects needed for MPLS VPN VRF
+management.""",
+        }, # group
+        "mplsL3VpnIfGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.2.1.3",
+            "status" : "current",
+            "members" : {
+                "mplsL3VpnIfVpnClassification" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnIfVpnRouteDistProtocol" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnIfConfStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnIfConfRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Collection of objects needed for MPLS VPN interface
+management.""",
+        }, # group
+        "mplsL3VpnPerfGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.2.1.4",
+            "status" : "current",
+            "members" : {
+                "mplsL3VpnVrfPerfRoutesAdded" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfPerfRoutesDeleted" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfPerfCurrNumRoutes" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Collection of objects needed for MPLS VPN
+performance information.""",
+        }, # group
+        "mplsL3VpnPerfRouteGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.2.1.5",
+            "status" : "current",
+            "members" : {
+                "mplsL3VpnVrfPerfRoutesDropped" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfPerfDiscTime" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Collection of objects needed to track MPLS VPN
+routing table dropped routes.""",
+        }, # group
+        "mplsL3VpnSecGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.2.1.7",
+            "status" : "current",
+            "members" : {
+                "mplsL3VpnVrfSecIllegalLblVltns" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfSecDiscontinuityTime" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Collection of objects needed for MPLS VPN
+security-related information.""",
+        }, # group
+        "mplsL3VpnVrfRteGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.2.1.8",
+            "status" : "current",
+            "members" : {
+                "mplsL3VpnVrfRteInetCidrIfIndex" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfRteInetCidrType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfRteInetCidrProto" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfRteInetCidrAge" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfRteInetCidrNextHopAS" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfRteInetCidrMetric1" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfRteInetCidrMetric2" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfRteInetCidrMetric3" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfRteInetCidrMetric4" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfRteInetCidrMetric5" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfRteXCPointer" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfRteInetCidrStatus" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Objects required for VRF route table management.""",
+        }, # group
+        "mplsL3VpnVrfRTGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.2.1.9",
+            "status" : "current",
+            "members" : {
+                "mplsL3VpnVrfRTDescr" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfRT" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfRTRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfRTStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Objects required for VRF route target management.""",
+        }, # group
+        "mplsL3VpnNotificationGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.2.1.10",
+            "status" : "current",
+            "members" : {
+                "mplsL3VpnVrfUp" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfDown" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfRouteMidThreshExceeded" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfNumVrfRouteMaxThreshExceeded" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnNumVrfSecIllglLblThrshExcd" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnNumVrfRouteMaxThreshCleared" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Objects required for MPLS VPN notifications.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "mplsL3VpnModuleFullCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.2.2.1",
+            "status" : "current",
+            "description" :
+                """Compliance statement for agents that provide full support
+for the MPLS-L3VPN-STD-MIB""",
+            "requires" : {
+                "mplsL3VpnScalarGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnIfGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnPerfGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfRteGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfRTGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnSecGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnNotificationGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnPerfRouteGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "description" :
+                        """This group is only mandatory for LSRs that
+support tracking the number of routes attempted
+to be added to VRFs.""",
+                },
+            }, # requires
+            "refinements" : {
+                "mplsL3VpnIfConfRowStatus" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "notInService" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "writesyntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "notInService" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                            "createAndGo" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                            "destroy" : {
+                                "nodetype" : "namednumber",
+                                "number" : "6"
+                            },
+                        },
+                    }, # writesyntax
+                    "description" :
+                        """Support for createAndWait and notReady is
+not required.""",
+                },
+                "mplsL3VpnVrfConfRowStatus" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "notInService" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "writesyntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "notInService" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                            "createAndGo" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                            "destroy" : {
+                                "nodetype" : "namednumber",
+                                "number" : "6"
+                            },
+                        },
+                    }, # writesyntax
+                    "description" :
+                        """Support for createAndWait and notReady is
+not required.""",
+                },
+                "mplsL3VpnVrfRTRowStatus" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "notInService" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "writesyntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "notInService" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                            "createAndGo" : {
+                                "nodetype" : "namednumber",
+                                "number" : "4"
+                            },
+                            "destroy" : {
+                                "nodetype" : "namednumber",
+                                "number" : "6"
+                            },
+                        },
+                    }, # writesyntax
+                    "description" :
+                        """Support for createAndWait and notReady is
+not required.""",
+                },
+            }, # refinements
+
+        }, # compliance
+        "mplsL3VpnModuleReadOnlyCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "MPLS-L3VPN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.11.2.2.2",
+            "status" : "current",
+            "description" :
+                """Compliance requirement for implementations that only
+provide read-only support for MPLS-L3VPN-STD-MIB.
+Such devices can then be monitored but cannot be
+configured using this MIB module.""",
+            "requires" : {
+                "mplsL3VpnScalarGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnIfGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnPerfGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfRteGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnVrfRTGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnSecGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnNotificationGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-L3VPN-STD-MIB"
+                },
+                "mplsL3VpnPerfRouteGroup" : {
+                    "nodetype" : "optional",
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "description" :
+                        """This group is only mandatory for LSRs that
+support tracking the number of routes attempted to
+be added to VRFs.""",
+                },
+            }, # requires
+            "refinements" : {
+                "mplsL3VpnIfConfRowStatus" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnVrfConfRowStatus" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnVrfRTRowStatus" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnIfVpnClassification" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnIfVpnRouteDistProtocol" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnIfConfStorageType" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnVrfVpnId" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnVrfDescription" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnVrfRD" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnVrfConfMidRteThresh" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnVrfConfHighRteThresh" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnVrfConfMaxRoutes" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnVrfConfStorageType" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnVrfRT" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnVrfRTDescr" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnVrfRTStorageType" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnVrfRteInetCidrIfIndex" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnVrfRteInetCidrType" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnVrfRteInetCidrNextHopAS" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnVrfRteInetCidrMetric1" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnVrfRteInetCidrMetric2" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnVrfRteInetCidrMetric3" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnVrfRteInetCidrMetric4" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnVrfRteInetCidrMetric5" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnVrfRteXCPointer" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsL3VpnVrfRteInetCidrStatus" : {
+                    "module" : "MPLS-L3VPN-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+            }, # refinements
+
+        }, # compliance
+    }, # compliances
+
+}