logstash-input-snmp 0.1.0.beta4 → 0.1.0.beta5

data/lib/mibs/ietf/MPLS-FTN-STD-MIB.dic

@@ -0,0 +1,1594 @@
+# python version 1.0						DO NOT EDIT
+#
+# This python file has been generated by smidump version 0.5.0:
+#
+#   smidump -f python MPLS-FTN-STD-MIB
+
+FILENAME = "./libsmi-0.5.0/mibs/ietf/MPLS-FTN-STD-MIB"
+
+MIB = {
+    "moduleName" : "MPLS-FTN-STD-MIB",
+
+    "MPLS-FTN-STD-MIB" : {
+        "nodetype" : "module",
+        "language" : "SMIv2",
+        "organization" :    
+            """Multiprotocol Label Switching (MPLS) Working Group""",
+        "contact" : 
+            """
+Thomas D. Nadeau
+Postal: Cisco Systems, Inc.
+250 Apollo Drive
+Chelmsford, MA 01824
+Tel:    +1-978-244-3051
+Email:  tnadeau@cisco.com
+
+Cheenu Srinivasan
+Postal: Bloomberg L.P.
+499 Park Avenue
+New York, NY 10022
+Tel:    +1-212-893-3682
+Email:  cheenu@bloomberg.net
+
+Arun Viswanathan
+Postal: Force10 Networks, Inc.
+1440 McCarthy Blvd
+Milpitas, CA 95035
+Tel:    +1-408-571-3516
+Email:  arunv@force10networks.com
+
+IETF MPLS Working Group email: mpls@uu.net""",
+        "description" :
+            """Copyright (C) The Internet Society (2004). The
+initial version of this MIB module was published
+in RFC 3814. For full legal notices see the RFC
+itself or see:
+http://www.ietf.org/copyrights/ianamib.html
+
+This MIB module contains managed object definitions for
+specifying FEC to NHLFE (FTN) mappings and corresponding
+performance for MPLS.""",
+        "revisions" : (
+            {
+                "date" : "2004-06-03 00:00",
+                "description" :
+                    """Initial version issued as part of RFC 3814.""",
+            },
+        ),
+        "identity node" : "mplsFTNStdMIB",
+    },
+
+    "imports" : (
+        {"module" : "SNMPv2-SMI", "name" : "MODULE-IDENTITY"},
+        {"module" : "SNMPv2-SMI", "name" : "OBJECT-TYPE"},
+        {"module" : "SNMPv2-SMI", "name" : "Unsigned32"},
+        {"module" : "SNMPv2-SMI", "name" : "Counter64"},
+        {"module" : "SNMPv2-SMI", "name" : "Integer32"},
+        {"module" : "SNMPv2-TC", "name" : "RowStatus"},
+        {"module" : "SNMPv2-TC", "name" : "StorageType"},
+        {"module" : "SNMPv2-TC", "name" : "RowPointer"},
+        {"module" : "SNMPv2-TC", "name" : "TEXTUAL-CONVENTION"},
+        {"module" : "SNMPv2-TC", "name" : "TimeStamp"},
+        {"module" : "SNMPv2-CONF", "name" : "MODULE-COMPLIANCE"},
+        {"module" : "SNMPv2-CONF", "name" : "OBJECT-GROUP"},
+        {"module" : "IF-MIB", "name" : "InterfaceIndexOrZero"},
+        {"module" : "IF-MIB", "name" : "ifGeneralInformationGroup"},
+        {"module" : "IF-MIB", "name" : "ifCounterDiscontinuityGroup"},
+        {"module" : "SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+        {"module" : "DIFFSERV-DSCP-TC", "name" : "Dscp"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetAddressType"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetAddress"},
+        {"module" : "INET-ADDRESS-MIB", "name" : "InetPortNumber"},
+        {"module" : "MPLS-TC-STD-MIB", "name" : "mplsStdMIB"},
+    ),
+
+    "typedefs" : {
+        "MplsFTNEntryIndex" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "1",
+                "max" : "4294967295"
+            },
+            ],
+            "range" : {
+                "min" : "1",
+                "max" : "4294967295"
+            },
+            "description" :
+                """Index for an entry in mplsFTNTable.""",
+        },
+        "MplsFTNEntryIndexOrZero" : {
+            "basetype" : "Unsigned32",
+            "status" : "current",
+            "ranges" : [
+            {
+                "min" : "0",
+                "max" : "4294967295"
+            },
+            ],
+            "range" : {
+                "min" : "0",
+                "max" : "4294967295"
+            },
+            "description" :
+                """Index for an entry in mplsFTNTable or the special value
+zero. The value zero is object-specific and must
+therefore be defined as part of the description of any
+object which uses this syntax.  Examples of the usage
+of zero might include situations when none or all
+entries in mplsFTNTable need to be referenced.""",
+        },
+    }, # typedefs
+
+    "nodes" : {
+        "mplsFTNStdMIB" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8",
+            "status" : "current",
+        }, # node
+        "mplsFTNNotifications" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.0",
+        }, # node
+        "mplsFTNObjects" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1",
+        }, # node
+        "mplsFTNIndexNext" : {
+            "nodetype" : "scalar",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-FTN-STD-MIB", "name" : "MplsFTNEntryIndexOrZero"},
+            },
+            "access" : "readonly",
+            "description" :
+                """This object contains the next available valid value to
+be used for mplsFTNIndex when creating entries in the
+mplsFTNTable.
+
+When creating a new conceptual row (configuration
+entry) in mplsFTNTable with an SNMP SET operation the
+command generator (Network Management Application) must
+first issue a management protocol retrieval operation
+to obtain the current value of this object.
+
+If the command responder (agent) does not wish to allow
+creation of more entries in mplsFTNTable, possibly
+because of resource exhaustion, this object MUST return
+a value of 0.
+
+If a non-zero value is returned the Network Management
+
+
+
+Application must determine whether the value is indeed
+still unused since two Network Management Applications
+may attempt to create a row simultaneously and use the
+same value.
+
+If it is currently unused and the SET succeeds, the
+agent MUST change the value of this object to a
+currently unused non-zero value (according to an
+implementation specific algorithm) or zero (if no
+further row creation will be permitted).
+
+If the value is in use, however, the SET fails and the
+Network Management Application must then reread this
+object to obtain a new usable value.""",
+        }, # scalar
+        "mplsFTNTableLastChanged" : {
+            "nodetype" : "scalar",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Indicates the last time an entry was added, deleted or
+modified in mplsFTNTable.  Management stations should
+consult this object to determine if mplsFTNTable
+requires their attention.  This object is particularly
+useful for applications performing a retrieval on
+mplsFTNTable to ensure that the table is not modified
+during the retrieval operation.""",
+        }, # scalar
+        "mplsFTNTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.3",
+            "status" : "current",
+            "description" :
+                """This table contains the currently defined FTN entries.
+This table allows FEC to NHLFE mappings to be
+specified.  Each entry in this table defines a rule to
+be applied to incoming packets (on interfaces that the
+FTN entry is activated on using mplsFTNMapTable) and an
+action to be taken on matching packets
+(mplsFTNActionPointer).
+
+This table supports 6-tuple matching rules based on one
+or more of source address range, destination address
+range, source port range, destination port range, IPv4
+
+
+
+Protocol field or IPv6 next-header field and the
+DiffServ Code Point (DSCP) to be specified.
+
+The action pointer points either to instance of
+mplsXCEntry in MPLS-LSR-STD-MIB when the NHLFE is a non-
+TE LSP, or to an instance of mplsTunnelEntry in the
+MPLS-TE-STD-MIB when the NHLFE is an originating TE
+tunnel.""",
+            "reference" :
+                """J. Postel, Internet Protocol, RFC 791, STD 5, September
+1981
+
+Deering, S., and R. Hinden, Internet Protocol, Version
+6 (IPv6) Specification, RFC 2460, December 1998
+
+Nichols, K, Blake, S., Baker, F. and D. Black,
+Definition of the Differentiated Services Field (DS
+Field) in the IPv4 and IPv6 Headers, RFC 2474, December
+1998
+
+Srinivasan, C., A. Viswanathan, and T. Nadeau, MPLS
+Label Switch Router Management Information Base,
+RFC 3813
+
+Srinivasan, C., A. Viswanathan, and T. Nadeau, MPLS
+Traffic Engineering Management Information Base,
+RFC 3812""",
+        }, # table
+        "mplsFTNEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.3.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "mplsFTNIndex",
+            ],
+            "description" :
+                """Each entry represents one FTN entry which defines a
+rule to compare incoming packets with and an action to
+be taken on matching packets.""",
+        }, # row
+        "mplsFTNIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.3.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-FTN-STD-MIB", "name" : "MplsFTNEntryIndex"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """This is the unique index for a conceptual row in
+mplsFTNTable.
+
+To create a new conceptual row in mplsFTNTable a
+Network Management Application SHOULD retrieve the
+current value of mplsFTNIndexNext to determine the next
+valid available value of mplsFTNIndex.""",
+        }, # column
+        "mplsFTNRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.3.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowStatus"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """Used for controlling the creation and deletion of this
+row. All writeable objects in this row may be modified
+at any time. If a Network Management Application
+attempts to delete a conceptual row by setting this
+object to 'destroy' and there are one or more entries
+in mplsFTNMapTable pointing to the row (i.e., when
+mplsFTNIndex of the conceptual row being deleted is
+equal to mplsFTNMapCurrIndex for one or more entries in
+mplsFTNMapTable), the agent MUST also destroy the
+corresponding entries in mplsFTNMapTable.""",
+        }, # column
+        "mplsFTNDescr" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.3.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMP-FRAMEWORK-MIB", "name" : "SnmpAdminString"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The description of this FTN entry. Since the index for
+this table has no particular significance or meaning,
+this object should contain some meaningful text that an
+operator could use to further distinguish entries in
+this table.""",
+        }, # column
+        "mplsFTNMask" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.3.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Bits",
+                    "sourceAddr" : {
+                        "nodetype" : "namednumber",
+                        "number" : "0"
+                    },
+                    "destAddr" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "sourcePort" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                    "destPort" : {
+                        "nodetype" : "namednumber",
+                        "number" : "3"
+                    },
+                    "protocol" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "dscp" : {
+                        "nodetype" : "namednumber",
+                        "number" : "5"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """This bit map indicates which of the fields described
+next, namely source address range, destination address
+range, source port range, destination port range, IPv4
+Protocol field or IPv6 next-header field and
+Differentiated Services Code Point (DSCP) is active for
+this FTN entry. If a particular bit is set to zero then
+the corresponding field in the packet MUST be ignored
+for comparison purposes.""",
+        }, # column
+        "mplsFTNAddrType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.3.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddressType"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """This object determines the type of address contained in
+the source and destination address objects
+(mplsFTNSourceAddrMin, mplsFTNSourceAddrMax,
+mplsFTNDestAddrMin and mplsFTNDestAddrMax) of a
+conceptual row.
+
+This object MUST NOT be set to unknown(0) when
+mplsFTNMask has bit positions sourceAddr(0) or
+destAddr(1) set to one.
+
+When both these bit positions of mplsFTNMask are set to
+zero the value of mplsFTNAddrType SHOULD be set to
+unknown(0) and the corresponding source and destination
+
+
+
+address objects SHOULD be set to zero-length strings.""",
+        }, # column
+        "mplsFTNSourceAddrMin" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.3.1.6",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddress"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The lower end of the source address range. The type of
+this object is determined by the corresponding
+mplsFTNAddrType object.""",
+        }, # column
+        "mplsFTNSourceAddrMax" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.3.1.7",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddress"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The upper end of the source address range. The type of
+this object is determined by the corresponding
+mplsFTNAddrType object.""",
+        }, # column
+        "mplsFTNDestAddrMin" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.3.1.8",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddress"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The lower end of the destination address range. The
+type of this object is determined by the corresponding
+mplsFTNAddrType object.""",
+        }, # column
+        "mplsFTNDestAddrMax" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.3.1.9",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetAddress"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The higher end of the destination address range. The
+type of this object is determined by the corresponding
+mplsFTNAddrType object.""",
+        }, # column
+        "mplsFTNSourcePortMin" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.3.1.10",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetPortNumber"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """The lower end of the source port range.""",
+        }, # column
+        "mplsFTNSourcePortMax" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.3.1.11",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetPortNumber"},
+            },
+            "access" : "readwrite",
+            "default" : "65535",
+            "description" :
+                """The higher end of the source port range """,
+        }, # column
+        "mplsFTNDestPortMin" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.3.1.12",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetPortNumber"},
+            },
+            "access" : "readwrite",
+            "default" : "0",
+            "description" :
+                """The lower end of the destination port range.""",
+        }, # column
+        "mplsFTNDestPortMax" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.3.1.13",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"INET-ADDRESS-MIB", "name" : "InetPortNumber"},
+            },
+            "access" : "readwrite",
+            "default" : "65535",
+            "description" :
+                """The higher end of the destination port range.""",
+        }, # column
+        "mplsFTNProtocol" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.3.1.14",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Integer32",
+                    "ranges" : [
+                    {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                    ],
+                    "range" : {
+                        "min" : "0",
+                        "max" : "255"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "default" : "255",
+            "description" :
+                """The IP protocol to match against the IPv4 protocol
+number or IPv6 Next-Header number in the packet. A
+value of 255 means match all.  Note that the protocol
+number of 255 is reserved by IANA, and Next-Header
+number of 0 is used in IPv6.""",
+        }, # column
+        "mplsFTNDscp" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.3.1.15",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"DIFFSERV-DSCP-TC", "name" : "Dscp"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """The contents of the DSCP field.""",
+            "reference" :
+                """Nichols, K., Blake, S., Baker, F. and D. Black,
+Definition of the Differentiated Services Field (DS
+Field) in the IPv4 and IPv6 Headers, RFC 2474, December
+1998.""",
+        }, # column
+        "mplsFTNActionType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.3.1.16",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "redirectLsp" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "redirectTunnel" : {
+                        "nodetype" : "namednumber",
+                        "number" : "2"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """The type of action to be taken on packets matching this
+FTN entry.""",
+        }, # column
+        "mplsFTNActionPointer" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.3.1.17",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "RowPointer"},
+            },
+            "access" : "readwrite",
+            "description" :
+                """If mplsFTNActionType is redirectLsp(1), then this
+object MUST contain zeroDotZero or point to a instance
+of mplsXCEntry indicating the LSP to redirect matching
+packets to.
+
+If mplsFTNActionType is redirectTunnel(2), then this
+object MUST contain zeroDotZero or point to a instance
+of mplsTunnelEntry indicating the MPLS TE tunnel to
+redirect matching packets to.
+
+If this object points to a conceptual row instance in a
+table consistent with mplsFTNActionType but this
+instance does not currently exist then no action will
+be taken on packets matching such an FTN entry till
+this instance comes into existence.
+
+If this object contains zeroDotZero then no action will
+be taken on packets matching such an FTN entry till it
+is populated with a valid pointer consistent with the
+value of mplsFTNActionType as explained above.""",
+        }, # column
+        "mplsFTNStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.3.1.18",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "default" : "nonVolatile",
+            "description" :
+                """The storage type for this FTN entry. Conceptual rows
+having the value 'permanent' need not allow write-
+access to any columnar objects in the row.""",
+        }, # column
+        "mplsFTNMapTableLastChanged" : {
+            "nodetype" : "scalar",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Indicates the last time an entry was added, deleted or
+modified in mplsFTNMapTable. Management stations should
+consult this object to determine if the table requires
+their attention.  This object is particularly useful
+for applications performing a retrieval on
+mplsFTNMapTable to ensure that the table is not
+modified during the retrieval operation.""",
+        }, # scalar
+        "mplsFTNMapTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.5",
+            "status" : "current",
+            "description" :
+                """This table contains objects which provide the
+capability to apply or map FTN rules as defined by
+entries in mplsFTNTable to specific interfaces in the
+system.  FTN rules are compared with incoming packets
+in the order in which they are applied on an interface.
+
+The indexing structure of mplsFTNMapTable is as
+follows.
+
+- mplsFTNMapIndex indicates the interface to which the
+  rule is being applied.  A value of 0 represents the
+  application of the rule to all interfaces.
+
+
+
+
+- mplsFTNMapPrevIndex specifies the rule on the
+  interface prior to the one being applied.  A value of
+  0 specifies that the rule is being inserted at the
+  head of the list of rules currently applied to the
+  interface.
+
+- mplsFTNMapCurrIndex is the index in mplsFTNTable
+  corresponding to the rule being applied.
+
+This indexing structure makes the entries in the table
+behave like items in a linked-list.  The object
+mplsFTNMapPrevIndex in each conceptual row is a pointer
+to the previous entry that is applied to a particular
+interface.  This allows a new entry to be 'inserted' at
+an arbitrary position in a list of entries currently
+applied to an interface.  This object is self-
+adjusting, i.e., its value is automatically adjusted by
+the agent, if necessary, after an insertion or deletion
+operation.
+
+Using this linked-list structure, one can retrieve FTN
+entries in the order of application on a per-interface
+basis as follows:
+
+- To determine the first FTN entry on an interface
+  with index ifIndex perform a GETNEXT retrieval
+  operation on mplsFTNMapRowStatus.ifIndex.0.0; the
+  returned object, if one exists, is (say)
+  mplsFTNMapRowStatus.ifIndex.0.n (mplsFTNMapRowStatus
+  is the first accessible columnar object in the
+  conceptual row). Then the index of the first FTN
+  entry applied on this interface is n.
+
+- To determine the FTN entry applied to an interface
+  after the one indexed by n perform a GETNEXT
+  retrieval operation on
+  mplsFTNMapRowStatus.ifIndex.n.0.  If such an entry
+  exists the returned object would be of the form
+  mplsFTNMapRowStatus.ifIndex.n.m.  Then the index of
+  the next FTN entry applied on this interface is m.
+
+- If the FTN entry indexed by n is the last entry
+  applied to the interface with index ifIndex then the
+  object returned would either be:
+
+  1.mplsFTNMapRowStatus.ifIndexNext.0.k, where
+    ifIndexNext is the index of the next interface in
+
+
+
+    ifTable to which an FTN entry has been applied, in
+    which case k is the index of the first FTN entry
+    applied to the interface with index ifIndexNext;
+
+  or:
+
+  2.mplsFTNMapStorageType.firstIfIndex.0.p, if there
+    are no more entries in mplsFTNMapTable, where
+    firstIfIndex is the first entry in ifTable to
+    which an FTN entry has been mapped.
+
+Use the above steps to retrieve all the applied FTN
+entries on a per-interface basis in application order.
+Note that the number of retrieval operations is the
+same as the number of applied FTN entries (i.e., the
+minimum number of GETNEXT operations needed using any
+indexing scheme).
+
+Agents MUST NOT allow the same FTN entry as specified
+by mplsFTNMapCurrIndex to be applied multiple times to
+the same interface.
+
+Agents MUST NOT allow the creation of rows in this
+table until the corresponding rows are created in the
+mplsFTNTable.
+
+If a row in mplsFTNTable is destroyed, the agent MUST
+destroy the corresponding entries (i.e., ones with a
+matching value of mplsFTNCurrIndex) in this table as
+well.""",
+        }, # table
+        "mplsFTNMapEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.5.1",
+            "create" : "true",
+            "status" : "current",
+            "linkage" : [
+                "mplsFTNMapIndex",
+                "mplsFTNMapPrevIndex",
+                "mplsFTNMapCurrIndex",
+            ],
+            "description" :
+                """Each conceptual row represents the application of an
+FTN rule at a specific position in the list of FTN
+rules applied on an interface. """,
+        }, # row
+        "mplsFTNMapIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.5.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "InterfaceIndexOrZero"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The interface index that this FTN entry is being
+applied to. A value of zero indicates an entry that is
+applied all interfaces.
+
+Entries mapped to an interface by specifying its (non-
+zero) interface index in mplsFTNMapIndex are applied
+ahead of entries with mplsFTNMapIndex equal to zero.""",
+        }, # column
+        "mplsFTNMapPrevIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.5.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-FTN-STD-MIB", "name" : "MplsFTNEntryIndexOrZero"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The index of the previous FTN entry that was applied to
+this interface. The special value zero indicates that
+this should be the first FTN entry in the list.""",
+        }, # column
+        "mplsFTNMapCurrIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.5.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-FTN-STD-MIB", "name" : "MplsFTNEntryIndex"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """Index of the current FTN entry that is being applied to
+this interface.""",
+        }, # column
+        "mplsFTNMapRowStatus" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.5.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" :                 {
+                    "basetype" : "Enumeration",
+                    "parent module" : {
+                        "name" : "SNMPv2-TC",
+                        "type" : "RowStatus",
+                    },
+                    "active" : {
+                        "nodetype" : "namednumber",
+                        "number" : "1"
+                    },
+                    "createAndGo" : {
+                        "nodetype" : "namednumber",
+                        "number" : "4"
+                    },
+                    "destroy" : {
+                        "nodetype" : "namednumber",
+                        "number" : "6"
+                    },
+                },
+            },
+            "access" : "readwrite",
+            "description" :
+                """Used for controlling the creation and deletion of this
+row.
+
+All writable objects in this row may be modified at any
+time.
+
+If a conceptual row in mplsFTNMapTable points to a
+conceptual row in mplsFTNTable which is subsequently
+deleted, the corresponding conceptual row in
+mplsFTNMapTable MUST also be deleted by the agent.""",
+        }, # column
+        "mplsFTNMapStorageType" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.5.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "StorageType"},
+            },
+            "access" : "readwrite",
+            "default" : "nonVolatile",
+            "description" :
+                """The storage type for this entry.  Conceptual rows
+having the value 'permanent' need not allow write-
+access to any columnar objects in this row.""",
+        }, # column
+        "mplsFTNPerfTable" : {
+            "nodetype" : "table",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.6",
+            "status" : "current",
+            "description" :
+                """This table contains performance statistics on FTN
+entries on a per-interface basis.""",
+        }, # table
+        "mplsFTNPerfEntry" : {
+            "nodetype" : "row",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.6.1",
+            "status" : "current",
+            "linkage" : [
+                "mplsFTNPerfIndex",
+                "mplsFTNPerfCurrIndex",
+            ],
+            "description" :
+                """Each entry contains performance information for the
+specified interface and an FTN entry mapped to this
+interface.""",
+        }, # row
+        "mplsFTNPerfIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.6.1.1",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"IF-MIB", "name" : "InterfaceIndexOrZero"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """The interface index of an interface that an FTN entry
+has been applied/mapped to.  Each instance of this
+object corresponds to an instance of mplsFTNMapIndex.""",
+        }, # column
+        "mplsFTNPerfCurrIndex" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.6.1.2",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"MPLS-FTN-STD-MIB", "name" : "MplsFTNEntryIndex"},
+            },
+            "access" : "noaccess",
+            "description" :
+                """Index of an FTN entry that has been applied/mapped to
+the specified interface.  Each instance of this object
+corresponds to an instance of mplsFTNMapCurrIndex.""",
+        }, # column
+        "mplsFTNPerfMatchedPackets" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.6.1.3",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Number of packets that matched the specified FTN entry
+if it is applied/mapped to the specified interface.
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by the value of
+mplsFTNDiscontinuityTime.""",
+        }, # column
+        "mplsFTNPerfMatchedOctets" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.6.1.4",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-SMI", "name" : "Counter64"},
+            },
+            "access" : "readonly",
+            "description" :
+                """Number of octets that matched the specified FTN entry
+if it is applied/mapped to the specified interface.
+
+
+
+Discontinuities in the value of this counter can occur
+at re-initialization of the management system, and at
+other times as indicated by the value of
+mplsFTNDiscontinuityTime.""",
+        }, # column
+        "mplsFTNPerfDiscontinuityTime" : {
+            "nodetype" : "column",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.1.6.1.5",
+            "status" : "current",
+            "syntax" : {
+                "type" : { "module" :"SNMPv2-TC", "name" : "TimeStamp"},
+            },
+            "access" : "readonly",
+            "description" :
+                """The value of sysUpTime on the most recent occasion at
+which any one or more of this entry's counters suffered
+a discontinuity.  If no such discontinuities have
+occurred since the last re-initialization of the local
+management subsystem, then this object contains a zero
+value.""",
+        }, # column
+        "mplsFTNConformance" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.2",
+        }, # node
+        "mplsFTNGroups" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.2.1",
+        }, # node
+        "mplsFTNCompliances" : {
+            "nodetype" : "node",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.2.2",
+        }, # node
+    }, # nodes
+
+    "groups" : {
+        "mplsFTNRuleGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.2.1.1",
+            "status" : "current",
+            "members" : {
+                "mplsFTNIndexNext" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNTableLastChanged" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNDescr" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNMask" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNAddrType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNSourceAddrMin" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNSourceAddrMax" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNDestAddrMin" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNDestAddrMax" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNSourcePortMin" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNSourcePortMax" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNDestPortMin" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNDestPortMax" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNProtocol" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNActionType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNActionPointer" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNDscp" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Collection of objects that implement MPLS FTN rules.""",
+        }, # group
+        "mplsFTNMapGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.2.1.2",
+            "status" : "current",
+            "members" : {
+                "mplsFTNMapTableLastChanged" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNMapRowStatus" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNMapStorageType" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Collection of objects that implement activation of MPLS
+FTN entries on interfaces.""",
+        }, # group
+        "mplsFTNPerfGroup" : {
+            "nodetype" : "group",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.2.1.3",
+            "status" : "current",
+            "members" : {
+                "mplsFTNPerfMatchedPackets" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNPerfMatchedOctets" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNPerfDiscontinuityTime" : {
+                    "nodetype" : "member",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+            }, # members
+            "description" :
+                """Collection of objects providing MPLS FTN performance
+information.""",
+        }, # group
+    }, # groups
+
+    "compliances" : {
+        "mplsFTNModuleFullCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.2.2.1",
+            "status" : "current",
+            "description" :
+                """Compliance statement for agents that provide full
+support for MPLS-FTN-STD-MIB.""",
+            "requires" : {
+                "ifGeneralInformationGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "IF-MIB"
+                },
+                "ifCounterDiscontinuityGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "IF-MIB"
+                },
+                "mplsFTNRuleGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNMapGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNPerfGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+            }, # requires
+            "refinements" : {
+                "mplsFTNAddrType" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddressType",
+                            },
+                            "ipv4" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "ipv6" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """An implementation is only required to support IPv4
+and/or IPv6 addresses.  An implementation is only
+required to support the address types that are actually
+supported on the LSR.""",
+                },
+                "mplsFTNSourceAddrMin" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "OctetString",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddress",
+                            },
+                            "ranges" : [
+                            {
+                                "min" : "4",
+                                "max" : "4"
+                            },
+                            {
+                                "min" : "20",
+                                "max" : "20"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "4",
+                                "max" : "20"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """An implementation is only required to support IPv4
+and/or IPv6 addresses.  An implementation is only
+required to support the address types that are actually
+supported on the LSR.""",
+                },
+                "mplsFTNSourceAddrMax" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "OctetString",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddress",
+                            },
+                            "ranges" : [
+                            {
+                                "min" : "4",
+                                "max" : "4"
+                            },
+                            {
+                                "min" : "20",
+                                "max" : "20"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "4",
+                                "max" : "20"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """An implementation is only required to support IPv4
+and/or IPv6 addresses.  An implementation is only
+required to support the address types that are actually
+supported on the LSR.""",
+                },
+                "mplsFTNDestAddrMin" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "OctetString",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddress",
+                            },
+                            "ranges" : [
+                            {
+                                "min" : "4",
+                                "max" : "4"
+                            },
+                            {
+                                "min" : "20",
+                                "max" : "20"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "4",
+                                "max" : "20"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """An implementation is only required to support IPv4
+and/or IPv6 addresses.  An implementation is only
+required to support the address types that are actually
+supported on the LSR.""",
+                },
+                "mplsFTNDestAddrMax" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "OctetString",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddress",
+                            },
+                            "ranges" : [
+                            {
+                                "min" : "4",
+                                "max" : "4"
+                            },
+                            {
+                                "min" : "20",
+                                "max" : "20"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "4",
+                                "max" : "20"
+                            },
+                        },
+                    }, # syntax
+                    "description" :
+                        """An implementation is only required to support IPv4
+and/or IPv6 addresses.  An implementation is only
+required to support the address types that are actually
+supported on the LSR.""",
+                },
+            }, # refinements
+
+        }, # compliance
+        "mplsFTNModuleReadOnlyCompliance" : {
+            "nodetype" : "compliance",
+            "moduleName" : "MPLS-FTN-STD-MIB",
+            "oid" : "1.3.6.1.2.1.10.166.8.2.2.2",
+            "status" : "current",
+            "description" :
+                """Compliance requirement for implementations that only
+
+
+
+provide read-only support for MPLS-FTN-STD-MIB. Such
+devices can then be monitored but cannot be configured
+using this MIB module.""",
+            "requires" : {
+                "ifGeneralInformationGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "IF-MIB"
+                },
+                "ifCounterDiscontinuityGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "IF-MIB"
+                },
+                "mplsFTNRuleGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNMapGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+                "mplsFTNPerfGroup" : {
+                    "nodetype" : "mandatory",
+                    "module" : "MPLS-FTN-STD-MIB"
+                },
+            }, # requires
+            "refinements" : {
+                "mplsFTNIndexNext" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "access" : "noaccess",
+                    "description" :
+                        """This object is not needed when mplsFTNTable is
+implemented as read-only.""",
+                },
+                "mplsFTNRowStatus" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "SNMPv2-TC",
+                                "type" : "RowStatus",
+                            },
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required, and active is the only
+status that needs to be supported.""",
+                },
+                "mplsFTNDescr" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsFTNMask" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsFTNAddrType" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddressType",
+                            },
+                            "ipv4" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                            "ipv6" : {
+                                "nodetype" : "namednumber",
+                                "number" : "2"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required. An implementation is only
+required to support IPv4 and IPv6 addresses.""",
+                },
+                "mplsFTNSourceAddrMin" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "OctetString",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddress",
+                            },
+                            "ranges" : [
+                            {
+                                "min" : "4",
+                                "max" : "4"
+                            },
+                            {
+                                "min" : "20",
+                                "max" : "20"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "4",
+                                "max" : "20"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required. An implementation is only
+required to support IPv4 and IPv6 addresses.""",
+                },
+                "mplsFTNSourceAddrMax" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "OctetString",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddress",
+                            },
+                            "ranges" : [
+                            {
+                                "min" : "4",
+                                "max" : "4"
+                            },
+                            {
+                                "min" : "20",
+                                "max" : "20"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "4",
+                                "max" : "20"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required. An implementation is only
+required to support IPv4 and IPv6 addresses.""",
+                },
+                "mplsFTNDestAddrMin" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "OctetString",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddress",
+                            },
+                            "ranges" : [
+                            {
+                                "min" : "4",
+                                "max" : "4"
+                            },
+                            {
+                                "min" : "20",
+                                "max" : "20"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "4",
+                                "max" : "20"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required. An implementation is only
+required to support IPv4 and IPv6 addresses.""",
+                },
+                "mplsFTNDestAddrMax" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "OctetString",
+                            "parent module" : {
+                                "name" : "INET-ADDRESS-MIB",
+                                "type" : "InetAddress",
+                            },
+                            "ranges" : [
+                            {
+                                "min" : "4",
+                                "max" : "4"
+                            },
+                            {
+                                "min" : "20",
+                                "max" : "20"
+                            },
+                            ],
+                            "range" : {
+                                "min" : "4",
+                                "max" : "20"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required. An implementation is only
+required to support IPv4 and IPv6 addresses.""",
+                },
+                "mplsFTNSourcePortMin" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsFTNSourcePortMax" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsFTNDestPortMin" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsFTNDestPortMax" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsFTNProtocol" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsFTNActionType" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsFTNActionPointer" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsFTNDscp" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsFTNStorageType" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+                "mplsFTNMapRowStatus" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "syntax" : {
+                        "type" :                         {
+                            "basetype" : "Enumeration",
+                            "active" : {
+                                "nodetype" : "namednumber",
+                                "number" : "1"
+                            },
+                        },
+                    }, # syntax
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required, and active(1) is the only
+status that needs to be supported.""",
+                },
+                "mplsFTNMapStorageType" : {
+                    "module" : "MPLS-FTN-STD-MIB",
+                    "access" : "readonly",
+                    "description" :
+                        """Write access is not required.""",
+                },
+            }, # refinements
+
+        }, # compliance
+    }, # compliances
+
+}