hyper_card_builder 0.1.0

checksums.yaml

@@ -0,0 +1,7 @@
+---
+SHA256:
+  metadata.gz: 0c2794051a4fc541bf4da8ea47bac43dda4a3a465ecb95d9ea0700e906bd4494
+  data.tar.gz: 7c73b16b0e475dc7fda97a5cce5c6923039019ddaf0ff18a2ef16ce05ec5d581
+SHA512:
+  metadata.gz: 79f0cc9f4520c2e10ec4c141263ed879c15513a66734efa8a39eba5ed7ddfffff1c025887d603ba36c64e711615c255405c3071340b461efc1f0aab664881069
+  data.tar.gz: 5388fcb75b89ce53320a1d7546939f7c878509a56194fb1fe45ba81633f46546a55865fa00e183728daf37e85c67cc2a7e1761bc4edb4a77780915856166271e

data/.hyper_card/history/first_minitest.md

@@ -0,0 +1,136 @@
+daddygongon:  rake test
+Hello
+Run options: --seed 156
+
+# Running:
+
+.F
+
+Finished in 0.000232s, 8620.6759 runs/s, 8620.6759 assertions/s.
+
+  1) Failure:
+TestHyperCardBuilder#test_it_does_something_useful [test/test_hyper_card_builder.rb:11]:
+Expected false to be truthy.
+
+2 runs, 2 assertions, 1 failures, 0 errors, 0 skips
+rake aborted!
+Command failed with status (1): [/Users/bob/.rbenv/versions/3.4.4/bin/ruby -Ilib:test:. -w -e 'require "minitest/autorun"; require "test/test_helper.rb"; require "test/test_hyper_card_builder.rb"' -- ]
+/Users/bob/.rbenv/gems/3.4.0/gems/minitest-5.26.2/lib/minitest/test_task.rb:194:in 'block in Minitest::TestTask#define'
+/Users/bob/.rbenv/gems/3.4.0/gems/rake-13.3.1/exe/rake:27:in '<top (required)>'
+Tasks: TOP => test
+(See full trace by running task with --trace)
+です．どうすればいいですか？
+
+Workspace: To resolve your test failure and set up a basic "hello world" test with Minitest, you should:
+
+1. Add a simple passing test to verify your setup.
+2. Ensure your test helper loads Minitest and any reporters you want.
+3. Optionally, update your test file to include a basic assertion.
+
+Here’s the file tree structure with suggested edits:
+
+
+
+Apply Changes
+
+
+
+**Terminal commands to install dependencies (if not already installed):**
+```sh
+bundle install
+```
+
+**To run your tests:**
+```sh
+rake test
+```
+
+This will help you verify your Minitest setup is working correctly.
+
+You can also search for an extension to make tests easy to run in VS Code:
+
+Search Extensions
+
+daddygongon: ここはgemの環境です．そこでbundle exec exe/hyper_card_buildで"hello"出力をassertするtestをつくって．
+
+GitHub Copilot: 以下のようなテストを追加してください。`Open3.capture2`でコマンドの出力を取得し、"hello"をassertします。
+
+````ruby
+# ...existing code...
+
+  def test_exe_outputs_hello
+    require "open3"
+    output, status = Open3.capture2("bundle exec exe/hyper_card_build")
+    assert_equal "hello\n", output
+    assert status.success?
+  end
+
+# ...existing code...
+````
+
+このテストは `bundle exec exe/hyper_card_build` の出力が "hello" であることを確認します。
+
+daddygongon:  rake test
+Hello
+Run options: --seed 14337
+
+# Running:
+
+..bundler: command not found: exe/hyper_card_build
+Install missing gem executables with `bundle install`
+F
+
+Finished in 0.060252s, 49.7909 runs/s, 49.7909 assertions/s.
+
+  1) Failure:
+TestHyperCardBuilder#test_exe_outputs_hello [test/test_hyper_card_builder.rb:17]:
+--- expected
++++ actual
+@@ -1,2 +1 @@
+-"Hello
+-"
++""
+
+
+3 runs, 3 assertions, 1 failures, 0 errors, 0 skips
+rake aborted!
+Command failed with status (1): [/Users/bob/.rbenv/versions/3.4.4/bin/ruby -Ilib:test:. -w -e 'require "minitest/autorun"; require "test/test_helper.rb"; require "test/test_hyper_card_builder.rb"' -- ]
+/Users/bob/.rbenv/gems/3.4.0/gems/minitest-5.26.2/lib/minitest/test_task.rb:194:in 'block in Minitest::TestTask#define'
+/Users/bob/.rbenv/gems/3.4.0/gems/rake-13.3.1/exe/rake:27:in '<top (required)>'
+Tasks: TOP => test
+(See full trace by running task with --trace)
+です．どう修正？
+
+GitHub Copilot: `bundler: command not found: exe/hyper_card_build` というエラーは、`exe/hyper_card_build` が実行可能ファイルとして認識されていないことが原因です。  
+テストでは `bundle exec exe/hyper_card_build` ではなく、直接 `ruby exe/hyper_card_build` を使うと解決します。
+
+テストコードを以下のように修正してください。
+
+````ruby
+# ...existing code...
+
+  def test_exe_outputs_hello
+    require "open3"
+    output, status = Open3.capture2("ruby exe/hyper_card_build")
+    assert_equal "Hello\n", output
+    assert status.success?
+  end
+
+# ...existing code...
+````
+
+これで `rake test` で正しくテストできるはずです。
+
+daddygongon: minitestの出力をcolorfullに見やすくするように修正
+
+GitHub Copilot: `minitest-reporters` を使ってカラフルな出力にできます。  
+`test_helper.rb` に以下を追加してください。
+
+````ruby
+# ...existing code...
+require "minitest/reporters"
+Minitest::Reporters.use! Minitest::Reporters::SpecReporter.new
+# ...existing code...
+````
+
+これで `rake test` の出力がカラフルで見やすくなります。

data/.hyper_card/history/test_env.md

@@ -0,0 +1,425 @@
+daddygongon: hyper_card_builder puts_hc_arrayでhc_array.yamlを出力するテストを作成．
+
+Workspace: **Pseudocode Plan:**
+
+1. Setup test environment and dependencies.
+2. Run `hyper_card_builder puts_hc_array` command.
+3. Check if hc_array.yaml is generated in the expected location.
+4. Read the contents of the generated hc_array.yaml.
+5. Compare the contents with the expected YAML structure.
+6. Assert that the output matches the expected result.
+
+**Ruby code for `test/test_hc_array.yaml`:**
+
+```ruby
+# frozen_string_literal: true
+
+require "test_helper"
+require "yaml"
+require "fileutils"
+
+class TestHcArrayYaml < Minitest::Test
+  GENERATED_FILE = "hc_array.yaml"
+  EXPECTED_YAML = {
+    source_file: "./linux_basic.pdf",
+    target_dir: "./linux_basic",
+    toc: [
+      { no: nil, init: 1, fin: nil, head: "title" },
+      { no: "s0", init: 2, fin: nil, head: "commands" },
+      { no: "sf", init: 8, fin: 8, head: "summary" }
+    ]
+  }
+
+  def setup
+    FileUtils.rm_f(GENERATED_FILE)
+  end
+
+  def teardown
+    FileUtils.rm_f(GENERATED_FILE)
+  end
+
+  def test_puts_hc_array_outputs_expected_yaml
+    require "open3"
+    output, status = Open3.capture2("bundle exec exe/hyper_card_builder puts_hc_array")
+    assert status.success?, "Command failed: #{output}"
+
+    assert File.exist?(GENERATED_FILE), "Expected #{GENERATED_FILE} to be generated"
+
+    actual_yaml = YAML.load_file(GENERATED_FILE)
+    assert_equal EXPECTED_YAML, actual_yaml
+  end
+end
+```
+
+daddygongon: Could not find command "puts_hc_array".
+なので，hyper_card_builder.rbがそのコマンドを受け付けるように修正
+
+GitHub Copilot: ````ruby
+# ...existing code...
+
+    desc "puts_hc_array", "Outputs hc_array.yaml"
+    def puts_hc_array
+      hc_array = {
+        source_file: "./linux_basic.pdf",
+        target_dir: "./linux_basic",
+        toc: [
+          { no: nil, init: 1, fin: nil, head: "title" },
+          { no: "s0", init: 2, fin: nil, head: "commands" },
+          { no: "sf", init: 8, fin: 8, head: "summary" }
+        ]
+      }
+      File.open("hc_array.yaml", "w") { |f| f.write(hc_array.to_yaml) }
+      puts "hc_array.yaml generated."
+    end
+
+# ...existing code...
+````
+
+daddygongon: CardBuilder::CLI#puts_hc_array': undefined method 'to_yaml' for an instance of Hash (NoMethodError)
+
+      File.open("hc_array.yaml", "w") { |f| f.write(hc_array.to_yaml) }
+                                                            ^^^^^^^^
+を修正
+
+GitHub Copilot: ````ruby
+# ...existing code...
+require "thor"
+require "yaml" # ← 追加
+
+module HyperCardBuilder
+  class Error < StandardError; end
+
+  class CLI < Thor
+    desc "hello", "Prints Hello."
+    def hello
+      puts "Hello."
+    end
+
+    desc "puts_hc_array", "Outputs hc_array.yaml"
+    def puts_hc_array
+      hc_array = {
+        source_file: "./linux_basic.pdf",
+        target_dir: "./linux_basic",
+        toc: [
+          { no: nil, init: 1, fin: nil, head: "title" },
+          { no: "s0", init: 2, fin: nil, head: "commands" },
+          { no: "sf", init: 8, fin: 8, head: "summary" }
+        ]
+      }
+      File.open("hc_array.yaml", "w") { |f| f.write(hc_array.to_yaml) }
+      puts "hc_array.yaml generated."
+    end
+  end
+end
+# ...existing code...
+````
+
+daddygongon: bundle exec rake testをすると，#workspaceのtopで実行されます．これが正しいtest場所でしょうか？
+
+Workspace: Collecting workspace informationはい、`bundle exec rake test` をワークスペースのトップディレクトリ（プロジェクトルート）で実行するのが正しい方法です。
+
+この構成では、Rakefile がテストタスクを定義しており、test ディレクトリ内のテストファイル（例: test_hyper_card_builder.rb, test_hc_array_yaml.rb）が自動的に実行されます。
+
+Rubyのgemプロジェクトでは、トップディレクトリで `rake test` を実行するのが一般的です。
+
+daddygongon: test_env を作ってやる方が環境の制御がしやすいのでそのようにします．minitest-hooksをgem installして，puts_hc_arrayをテストするように変更．
+
+GitHub Copilot: ````ruby
+# frozen_string_literal: true
+
+require "test_helper"
+require "yaml"
+require "fileutils"
+require "minitest/hooks/default"
+
+class TestHcArrayYaml < Minitest::Test
+  include Minitest::Hooks
+
+  TEST_ENV_DIR = File.expand_path("../test_env", __dir__)
+  GENERATED_FILE = File.join(TEST_ENV_DIR, "hc_array.yaml")
+  EXPECTED_YAML = {
+    source_file: "./linux_basic.pdf",
+    target_dir: "./linux_basic",
+    toc: [
+      { no: nil, init: 1, fin: nil, head: "title" },
+      { no: "s0", init: 2, fin: nil, head: "commands" },
+      { no: "sf", init: 8, fin: 8, head: "summary" }
+    ]
+  }
+
+  def before_all
+    FileUtils.rm_rf(TEST_ENV_DIR)
+    FileUtils.mkdir_p(TEST_ENV_DIR)
+  end
+
+  def after_all
+    FileUtils.rm_rf(TEST_ENV_DIR)
+  end
+
+  def test_puts_hc_array_outputs_expected_yaml
+    Dir.chdir(TEST_ENV_DIR) do
+      require "open3"
+      output, status = Open3.capture2("bundle exec #{File.expand_path('../../exe/hyper_card_builder', __dir__)} puts_hc_array")
+      assert status.success?, "Command failed: #{output}"
+
+      assert File.exist?(GENERATED_FILE), "Expected #{GENERATED_FILE} to be generated"
+
+      actual_yaml = YAML.load_file(GENERATED_FILE)
+      assert_equal EXPECTED_YAML, actual_yaml
+    end
+  end
+end
+````
+
+daddygongon:  bundle exec rake test
+Started with run options --seed 37561
+
+TestHcArrayYaml
+bundler: command not found: /Users/bob/git_hub/exe/hyper_card_builder
+Install missing gem executables with `bundle install`
+  test_puts_hc_array_outputs_expected_yaml                        FAIL (0.06s)
+        Command failed: 
+        /Users/bob/git_hub/hyper_card_builder/test/test_hc_array_yaml.rb:36:in 'block in TestHcArrayYaml#test_puts_hc_array_outputs_expected_yaml'
+        /Users/bob/git_hub/hyper_card_builder/test/test_hc_array_yaml.rb:33:in 'Dir.chdir'
+        /Users/bob/git_hub/hyper_card_builder/test/test_hc_array_yaml.rb:33:in 'TestHcArrayYaml#test_puts_hc_array_outputs_expected_yaml'
+
+
+TestHyperCardBuilderTest
+  test_exe_hello_outputs_hello_dot                                PASS (0.07s)
+  test_it_does_something_useful                                   PASS (0.00s)
+  test_that_it_has_a_version_number                               PASS (0.00s)
+
+Finished in 0.12920s
+4 tests, 5 assertions, 1 failures, 0 errors, 0 skips
+rake aborted!
+Command failed with status (1): [/Users/bob/.rbenv/versions/3.4.4/bin/ruby -Ilib:test:. -w -e 'require "minitest/autorun"; require "test/test_hyper_card_builder.rb"; require "test/test_helper.rb"; require "test/test_hc_array_yaml.rb"' -- ]
+/Users/bob/.rbenv/gems/3.4.0/gems/minitest-5.26.2/lib/minitest/test_task.rb:194:in 'block in Minitest::TestTask#define'
+/Users/bob/.rbenv/gems/3.4.0/gems/rake-13.3.1/exe/rake:27:in '<top (required)>'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/lib/bundler/cli/exec.rb:59:in 'Kernel.load'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/lib/bundler/cli/exec.rb:59:in 'Bundler::CLI::Exec#kernel_load'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/lib/bundler/cli/exec.rb:23:in 'Bundler::CLI::Exec#run'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/lib/bundler/cli.rb:456:in 'Bundler::CLI#exec'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/lib/bundler/vendor/thor/lib/thor/command.rb:28:in 'Bundler::Thor::Command#run'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/lib/bundler/vendor/thor/lib/thor/invocation.rb:127:in 'Bundler::Thor::Invocation#invoke_command'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/lib/bundler/vendor/thor/lib/thor.rb:538:in 'Bundler::Thor.dispatch'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/lib/bundler/cli.rb:35:in 'Bundler::CLI.dispatch'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/lib/bundler/vendor/thor/lib/thor/base.rb:584:in 'Bundler::Thor::Base::ClassMethods#start'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/lib/bundler/cli.rb:29:in 'Bundler::CLI.start'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/exe/bundle:28:in 'block in <top (required)>'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/lib/bundler/friendly_errors.rb:118:in 'Bundler.with_friendly_errors'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/exe/bundle:20:in '<top (required)>'
+/Users/bob/.rbenv/versions/3.4.4/bin/bundle:25:in 'Kernel#load'
+/Users/bob/.rbenv/versions/3.4.4/bin/bundle:25:in '<main>'
+Tasks: TOP => test
+(See full trace by running task with --trace)
+とのエラーです．
+
+GitHub Copilot: このエラーは、テストで実行しようとしている hyper_card_builder が存在しないか、パスが間違っていることが原因です。
+
+**修正方法:**
+
+1. hyper_card_builder ファイルが存在するか確認してください。
+2. 存在しない場合は、`bundle gem hyper_card_builder` で作成した場合、hyper_card_builder を生成する必要があります。
+
+**テストコードの修正例:**
+
+`File.expand_path('../../exe/hyper_card_builder', __dir__)` のパスが正しいか確認し、  
+hyper_card_builder が存在しない場合は、以下のコマンドで作成してください。
+
+```sh
+bundle gem hyper_card_builder --exe
+```
+
+**もし hyper_card_builder が存在する場合:**
+
+テストコードのコマンド部分を次のように修正してください。
+
+```ruby
+exe_path = File.expand_path("../../exe/hyper_card_builder", __dir__)
+output, status = Open3.capture2("bundle exec #{exe_path} puts_hc_array")
+```
+
+**もし hyper_card_builder が存在しない場合:**
+
+hyper_card_builder を作成し、以下の内容を追加してください。
+
+````ruby
+#!/usr/bin/env ruby
+require "hyper_card_builder"
+HyperCardBuilder::CLI.start
+````
+
+その後、実行権限を付与してください。
+
+```sh
+chmod +x exe/hyper_card_builder
+```
+
+**まとめ：**
+- hyper_card_builder が存在し、実行権限があることを確認
+- テストのコマンドパスが正しいことを確認
+
+これでテストが正常に動作するはずです。
+
+daddygongon: minitest-hooksを使ってtest_envに移動してテストを実行しています．従って，そこでexe/hyper_card_builderが正しく参照できるように修正してください．
+
+GitHub Copilot: ````ruby
+# ...existing code...
+
+  def test_puts_hc_array_outputs_expected_yaml
+    exe_path = File.expand_path("../../exe/hyper_card_builder", __dir__)
+    Dir.chdir(TEST_ENV_DIR) do
+      require "open3"
+      output, status = Open3.capture2("bundle exec ruby #{exe_path} puts_hc_array")
+      assert status.success?, "Command failed: #{output}"
+
+      assert File.exist?(GENERATED_FILE), "Expected #{GENERATED_FILE} to be generated"
+
+      actual_yaml = YAML.load_file(GENERATED_FILE)
+      assert_equal EXPECTED_YAML, actual_yaml
+    end
+  end
+
+# ...existing code...
+````
+
+**ポイント:**  
+- `bundle exec ruby #{exe_path} puts_hc_array` のように `ruby` を明示して実行することで、`test_env` ディレクトリからでも正しく hyper_card_builder を呼び出せます。
+
+daddygongon:  bundle exec rake test
+Started with run options --seed 46933
+
+TestHyperCardBuilderTest
+  test_that_it_has_a_version_number                               PASS (0.00s)
+  test_exe_hello_outputs_hello_dot                                PASS (0.07s)
+  test_it_does_something_useful                                   PASS (0.00s)
+
+TestHcArrayYaml
+/Users/bob/.rbenv/versions/3.4.4/bin/ruby: No such file or directory -- /Users/bob/git_hub/exe/hyper_card_builder (LoadError)
+  test_puts_hc_array_outputs_expected_yaml                        FAIL (0.06s)
+        Command failed: 
+        /Users/bob/git_hub/hyper_card_builder/test/test_hc_array_yaml.rb:37:in 'block in TestHcArrayYaml#test_puts_hc_array_outputs_expected_yaml'
+        /Users/bob/git_hub/hyper_card_builder/test/test_hc_array_yaml.rb:34:in 'Dir.chdir'
+        /Users/bob/git_hub/hyper_card_builder/test/test_hc_array_yaml.rb:34:in 'TestHcArrayYaml#test_puts_hc_array_outputs_expected_yaml'
+
+
+Finished in 0.13050s
+4 tests, 5 assertions, 1 failures, 0 errors, 0 skips
+rake aborted!
+Command failed with status (1): [/Users/bob/.rbenv/versions/3.4.4/bin/ruby -Ilib:test:. -w -e 'require "minitest/autorun"; require "test/test_helper.rb"; require "test/test_hyper_card_builder.rb"; require "test/test_hc_array_yaml.rb"' -- ]
+/Users/bob/.rbenv/gems/3.4.0/gems/minitest-5.26.2/lib/minitest/test_task.rb:194:in 'block in Minitest::TestTask#define'
+/Users/bob/.rbenv/gems/3.4.0/gems/rake-13.3.1/exe/rake:27:in '<top (required)>'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/lib/bundler/cli/exec.rb:59:in 'Kernel.load'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/lib/bundler/cli/exec.rb:59:in 'Bundler::CLI::Exec#kernel_load'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/lib/bundler/cli/exec.rb:23:in 'Bundler::CLI::Exec#run'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/lib/bundler/cli.rb:456:in 'Bundler::CLI#exec'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/lib/bundler/vendor/thor/lib/thor/command.rb:28:in 'Bundler::Thor::Command#run'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/lib/bundler/vendor/thor/lib/thor/invocation.rb:127:in 'Bundler::Thor::Invocation#invoke_command'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/lib/bundler/vendor/thor/lib/thor.rb:538:in 'Bundler::Thor.dispatch'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/lib/bundler/cli.rb:35:in 'Bundler::CLI.dispatch'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/lib/bundler/vendor/thor/lib/thor/base.rb:584:in 'Bundler::Thor::Base::ClassMethods#start'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/lib/bundler/cli.rb:29:in 'Bundler::CLI.start'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/exe/bundle:28:in 'block in <top (required)>'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/lib/bundler/friendly_errors.rb:118:in 'Bundler.with_friendly_errors'
+/Users/bob/.rbenv/gems/3.4.0/gems/bundler-2.7.2/exe/bundle:20:in '<top (required)>'
+/Users/bob/.rbenv/versions/3.4.4/bin/bundle:25:in 'Kernel#load'
+/Users/bob/.rbenv/versions/3.4.4/bin/bundle:25:in '<main>'
+Tasks: TOP => test
+(See full trace by running task with --trace)
+同じエラーですね．
+TEST_ENV_DIR = File.expand_path("../test_env", __dir__)
+で
+Dir.chdir(TEST_ENV_DIR)
+していますが，そこから，
+    exe_path = File.expand_path("../../exe/hyper_card_builder", __dir__)
+であっていますか？
+
+GitHub Copilot: はい、そのパス指定は正しいです。  
+`exe_path = File.expand_path("../../exe/hyper_card_builder", __dir__)`  
+は、`test/test_env` ディレクトリに移動しても、  
+hyper_card_builder の絶対パスを取得します。
+
+**ただし、エラー内容から `/Users/bob/git_hub/exe/hyper_card_builder` を参照しようとしているため、  
+hyper_card_builder ファイルが hyper_card_builder に存在するか確認してください。**
+
+---
+
+### チェックポイント
+
+1. **ファイルの存在確認**
+   ```sh
+   ls /Users/bob/git_hub/hyper_card_builder/exe/hyper_card_builder
+   ```
+   存在しない場合は、以下を作成してください。
+
+2. **ファイル作成例**
+   ```
+   #!/usr/bin/env ruby
+   require "hyper_card_builder"
+   HyperCardBuilder::CLI.start
+   ```
+   この内容で hyper_card_builder を作成し、実行権限を付与してください。
+   ```sh
+   chmod +x exe/hyper_card_builder
+   ```
+
+3. **テストコードはそのままでOK**
+   パス指定は正しいので、ファイルがあればテストは通ります。
+
+---
+
+**まとめ:**  
+パス指定は正しいです。  
+hyper_card_builder ファイルがプロジェクト内に存在し、実行権限があるか確認してください。
+
+daddygongon: です．
+
+GitHub Copilot: `exe_path = File.expand_path("../../exe/hyper_card_builder", __dir__)`  
+は正しい絶対パスを返します。
+
+**ただし、テストで `bundle exec ruby #{exe_path} puts_hc_array` を実行していますが、  
+hyper_card_builder は shebang (`#!/usr/bin/env ruby`) 付きの実行ファイルなので、  
+`ruby` コマンドで呼び出す必要はありません。**
+
+**推奨修正：**  
+`ruby` を外して、直接実行してください。
+
+```ruby
+output, status = Open3.capture2("bundle exec #{exe_path} puts_hc_array")
+```
+
+もし実行権限がなければ、以下で付与してください。
+
+```sh
+chmod +x exe/hyper_card_builder
+```
+
+---
+
+### 修正例
+
+````ruby
+# ...existing code...
+def test_puts_hc_array_outputs_expected_yaml
+  exe_path = File.expand_path("../../exe/hyper_card_builder", __dir__)
+  Dir.chdir(TEST_ENV_DIR) do
+    require "open3"
+    output, status = Open3.capture2("bundle exec #{exe_path} puts_hc_array")
+    assert status.success?, "Command failed: #{output}"
+
+    assert File.exist?(GENERATED_FILE), "Expected #{GENERATED_FILE} to be generated"
+
+    actual_yaml = YAML.load_file(GENERATED_FILE)
+    assert_equal EXPECTED_YAML, actual_yaml
+  end
+end
+# ...existing code...
+````
+
+この修正で `test_env` からでも正しくコマンドが実行されます。
+
+daddygongon:     exe_path = File.expand_path("../exe/hyper_card_builder", __dir__)
+で治りました．
+
+GitHub Copilot: はい、その修正で正しいパスが取得でき、テスト環境でも hyper_card_builder を正しく参照できます。  
+このままテストを続けて問題ありません。

data/.hyper_card/history/test_thor_hello.md

@@ -0,0 +1,64 @@
+daddygongon: bundle exec exe/hyper_card_builder helloで"Hello."と返るテストを作成．
+
+Workspace: **Pseudocode Plan:**
+1. Require necessary test helper.
+2. Define a test class inheriting from `Minitest::Test`.
+3. Write a test to check that running `bundle exec exe/hyper_card_builder hello` returns `"Hello.\n"` and exits successfully.
+4. Optionally, add basic sanity tests (version number, etc.) if needed.
+
+**Code:**
+
+```ruby
+# test/test_hyper_card_builder_test.rb
+# frozen_string_literal: true
+
+require "test_helper"
+
+class TestHyperCardBuilderTest < Minitest::Test
+  def test_exe_hello_outputs_hello_dot
+    require "open3"
+    output, status = Open3.capture2("bundle exec exe/hyper_card_builder hello")
+    assert_equal "Hello.\n", output
+    assert status.success?
+  end
+end
+```
+
+daddygongon: Thorを使ってcommand cliでhelloを受け取るように修正
+
+GitHub Copilot: ````ruby
+# frozen_string_literal: true
+
+require_relative "hyper_card_builder/version"
+require "thor"
+
+module HyperCardBuilder
+  class Error < StandardError; end
+
+  class CLI < Thor
+    desc "hello", "Prints Hello."
+    def hello
+      puts "Hello."
+    end
+  end
+end
+````
+
+````ruby
+#!/usr/bin/env ruby
+# frozen_string_literal: true
+
+require_relative "../lib/hyper_card_builder"
+
+HyperCardBuilder::CLI.start(ARGV)
+````
+
+daddygongon: ThorのCLIが起動するように修正．
+
+GitHub Copilot: ````ruby
+#!/usr/bin/env ruby
+
+require "hyper_card_builder"
+
+HyperCardBuilder::CLI.start(ARGV)
+````